Remove old ddp code from cxgb3i,cxgb4i,libcxgbi.
Next two commits adds DDP support using
common iSCSI DDP Page Pod Manager.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add common library module(libcxgb.ko) for
Chelsio drivers to remove duplicate code.
Code for iSCSI DDP Page Pod Manager is moved
from cxgb4.ko to libcxgb.ko. Earlier only cxgbit.ko
was using this code, now cxgb3i and cxgb4i will
also use common Page Pod manager code.
In future this module will have common connection
management and hardware specific code that can be
shared by multiple Chelsio drivers.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the ageing_time type in br_set_ageing_time() from u32 to what it
is expected to be, i.e. a clock_t.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
br_stp_enable_bridge() does take the br->lock spinlock. Fix its wrongly
pasted comment and use the same as br_stp_disable_bridge().
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In dra7xx_pcie_init_irq_domain(), the pattern used to check and return
error is:
if (!var) {
dev_err(...);
return PTR_ERR(var);
}
So the returned value in case of error is always 0, which means 'success'.
Change it to return -ENODEV instead.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
In xilinx_pcie_init_irq_domain(), the pattern used to check and return
error is:
if (!var) {
dev_err(...);
return PTR_ERR(var);
}
So the returned value in case of error is always 0, which means 'success'.
Change it to return -ENODEV instead.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Based on original work by Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using an IPoIB bond currently only active-backup mode is a valid
use case and this commit strengthens it.
Since commit 2ab82852a2 ("net/bonding: Enable bonding to enslave
netdevices not supporting set_mac_address()") was introduced till
4.7-rc1, IPoIB didn't support the set_mac_address ndo, and hence the
fail over mac policy always applied to IPoIB bonds.
With the introduction of commit 492a7e67ff ("IB/IPoIB: Allow setting
the device address"), that doesn't hold and practically IPoIB bonds are
broken as of that. To fix it, lets go to fail over mac if the device
doesn't support the ndo OR this is IPoIB device.
As a by-product, this commit also prevents a stack corruption which
occurred when trying to copy 20 bytes (IPoIB) device address
to a sockaddr struct that has only 16 bytes of storage.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The only purpose of down_try_lock() followed by up() seems to be to wake
up a possible reader. This patch replaces it with a wake-queue. There is
no locking around cpumask_empty() and the test is re-done in case there
was no hit.
With wait_event_interruptible_lock_irq(,&data_saved_lock) we would probably
be able to get rid of the `retry` label. However we still can return CPU
X which is valid now but later (after the lock dropped) the event may
have been removed because the CPU went offline.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
The kernel page table creation routines are accessible to other subsystems
(e.g., EFI) via the create_pgd_mapping() entry point, which allows mappings
to be created that are not covered by init_mm.
Since generic code such as apply_to_page_range() may expect translation
table pages that are not associated with init_mm to be covered by fully
constructed struct pages, add a call to pgtable_page_ctor() in the alloc
function used by create_pgd_mapping. Since it is no longer used by
create_mapping_late(), also update the name of this function to better
reflect its purpose.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The only purpose served by create_mapping_late() is to remap the already
mapped .text and .rodata kernel segments with read-only permissions. Since
we no longer allow block mappings to be split or merged,
create_mapping_late() should not pass an allocation function pointer into
__create_pgd_mapping(). So pass NULL instead.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
AT_VECTOR_SIZE_ARCH should be defined with the maximum number of
NEW_AUX_ENT entries that ARCH_DLINFO can contain, but it wasn't defined
for tile at all even though ARCH_DLINFO will contain one NEW_AUX_ENT for
the VDSO address.
This shouldn't be a problem as AT_VECTOR_SIZE_BASE includes space for
AT_BASE_PLATFORM which tile doesn't use, but lets define it now and add
the comment above ARCH_DLINFO as found in several other architectures to
remind future modifiers of ARCH_DLINFO to keep AT_VECTOR_SIZE_ARCH up to
date.
Fixes: 4a556f4f56 ("tile: implement gettimeofday() via vDSO")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
This reverts commit e083a21fca.
Not needed at all, tools/perf/util/perf_regs.h, included via:
#include "perf_regs.h"
Should have a definition for PERF_REGS_MAX, and since this is dependent
on HAVE_PERF_REGS_SUPPORT, fixes the build on powerpc, noticed by trying
to cross compile this from ubuntu16.04 with a locally build libz &
elfutils pair, since those are not available in multilib packages.
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-0bv204s71t4wuw1l53b6fz79@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To be clear: this is a ppc64le hosted, x86_64 target cross build.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160723150845.3af8e452@canb.auug.org.au
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit ddd0ce87bf ("mips: Remove unnecessary of_platform_populate with
default match table") dropped the include of linux/clk-provider.h from
arch/mips/ath79/setup.c. This results in the following build error.
arch/mips/ath79/setup.c: In function 'ath79_of_plat_time_init':
arch/mips/ath79/setup.c:232:2: error:
implicit declaration of function 'of_clk_init'
Fixes: ddd0ce87bf ("mips: Remove unnecessary of_platform_populate with default match table")
Cc: Rob Herring <robh@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rob Herring <robh@kernel.org>
Historically we didn't call VCPUOP_register_vcpu_info for CPU0 for
PVHVM guests (while we had it for PV and ARM guests). This is usually
fine as we can use vcpu info in the shared_info page but when we try
booting on a vCPU with Xen's vCPU id > 31 (e.g. when we try to kdump
after crashing on this CPU) we're not able to boot.
Switch to always doing VCPUOP_register_vcpu_info for the boot CPU.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Use the newly introduced xen_vcpu_id mapping to get Xen's idea of vCPU
id for CPU0.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
EVTCHNOP_init_control has vCPU id as a parameter and Xen's idea of
vCPU id should be used. Use the newly introduced xen_vcpu_id mapping
to convert it from Linux's id.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
EVTCHNOP_bind_ipi and EVTCHNOP_bind_virq pass vCPU id as a parameter
and Xen's idea of vCPU id should be used. Use the newly introduced
xen_vcpu_id mapping to convert it from Linux's id.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
shared_info page has space for 32 vcpu info slots for first 32 vCPUs
but these are the first 32 vCPUs from Xen's perspective and we should
map them accordingly with the newly introduced xen_vcpu_id mapping.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
HYPERVISOR_vcpu_op() passes Linux's idea of vCPU id as a parameter
while Xen's idea is expected. In some cases these ideas diverge so we
need to do remapping.
Convert all callers of HYPERVISOR_vcpu_op() to use xen_vcpu_nr().
Leave xen_fill_possible_map() and xen_filter_cpu_maps() intact as
they're only being called by PV guests before perpu areas are
initialized. While the issue could be solved by switching to
early_percpu for xen_vcpu_id I think it's not worth it: PV guests will
probably never get to the point where their idea of vCPU id diverges
from Xen's.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
It may happen that Xen's and Linux's ideas of vCPU id diverge. In
particular, when we crash on a secondary vCPU we may want to do kdump
and unlike plain kexec where we do migrate_to_reboot_cpu() we try
booting on the vCPU which crashed. This doesn't work very well for
PVHVM guests as we have a number of hypercalls where we pass vCPU id
as a parameter. These hypercalls either fail or do something
unexpected.
To solve the issue introduce percpu xen_vcpu_id mapping. ARM and PV
guests get direct mapping for now. Boot CPU for PVHVM guest gets its
id from CPUID. With secondary CPUs it is a bit more
trickier. Currently, we initialize IPI vectors before these CPUs boot
so we can't use CPUID. Use ACPI ids from MADT instead.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Currently we don't save ACPI ids (unlike LAPIC ids which go to
x86_cpu_to_apicid) from MADT and we may need this information later.
Particularly, ACPI ids is the only existent way for a PVHVM Xen guest
to figure out Xen's idea of its vCPUs ids before these CPUs boot and
in some cases these ids diverge from Linux's cpu ids.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Update cpuid.h header from xen hypervisor tree to get
XEN_HVM_CPUID_VCPU_ID_PRESENT definition.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* pm-cpuidle:
intel_idle: correct BXT support
intel_idle: re-work bxt_idle_state_table_update() and its helper
idle_intel: Add Denverton
drivers/idle: make intel_idle.c driver more explicitly non-modular
* pm-cpufreq: (41 commits)
Revert "cpufreq: pcc-cpufreq: update default value of cpuinfo_transition_latency"
cpufreq: export cpufreq_driver_resolve_freq()
cpufreq: Disallow ->resolve_freq() for drivers providing ->target_index()
cpufreq: acpi-cpufreq: use cached frequency mapping when possible
cpufreq: schedutil: map raw required frequency to driver frequency
cpufreq: add cpufreq_driver_resolve_freq()
cpufreq: intel_pstate: Check cpuid for MSR_HWP_INTERRUPT
intel_pstate: Update cpu_frequency tracepoint every time
cpufreq: intel_pstate: clean remnant struct element
cpufreq: powernv: Replacing pstate_id with frequency table index
intel_pstate: Fix MSR_CONFIG_TDP_x addressing in core_get_max_pstate()
cpufreq: Reuse new freq-table helpers
cpufreq: Handle sorted frequency tables more efficiently
cpufreq: Drop redundant check from cpufreq_update_current_freq()
intel_pstate: Declare pid_params/pstate_funcs/hwp_active __read_mostly
intel_pstate: add __init/__initdata marker to some functions/variables
intel_pstate: Fix incorrect placement of __initdata
cpufreq: mvebu: fix integer to pointer cast
cpufreq: intel_pstate: Broxton support
cpufreq: conservative: Do not use transition notifications
...
* pm-core:
PM / runtime: Asynchronous "idle" in pm_runtime_allow()
PM / runtime: print error when activating a child to unactive parent
* pm-clk:
PM / clk: Add support for adding a specific clock from device-tree
PM / clk: export symbols for existing pm_clk_<...> API fcns
* pm-domains:
PM / Domains: Convert pm_genpd_init() to return an error code
PM / Domains: Stop/start devices during system PM suspend/resume in genpd
PM / Domains: Allow runtime PM during system PM phases
PM / Runtime: Avoid resuming devices again in pm_runtime_force_resume()
PM / Domains: Remove redundant pm_request_idle() call in genpd
PM / Domains: Remove redundant wrapper functions for system PM
PM / Domains: Allow genpd to power on during system PM phases
* pm-pci:
PCI / PM: check all fields in pci_set_platform_pm()
* pm-sleep:
PM / hibernate: Introduce test_resume mode for hibernation
x86 / hibernate: Use hlt_play_dead() when resuming from hibernation
PM / hibernate: Image data protection during restoration
PM / hibernate: Add missing braces in __register_nosave_region()
PM / hibernate: Clean up comments in snapshot.c
PM / hibernate: Clean up function headers in snapshot.c
PM / hibernate: Add missing braces in hibernate_setup()
PM / hibernate: Recycle safe pages after image restoration
PM / hibernate: Simplify mark_unsafe_pages()
PM / hibernate: Do not free preallocated safe pages during image restore
PM / suspend: show workqueue state in suspend flow
PM / sleep: make PM notifiers called symmetrically
PM / sleep: Make pm_prepare_console() return void
PM / Hibernate: Don't let kasan instrument snapshot.c
* pm-tools:
PM / tools: scripts: AnalyzeSuspend v4.2
tools/turbostat: allow user to alter DESTDIR and PREFIX
* acpi-drivers:
ACPI / DPTF: move int340x_thermal.c to the DPTF folder
ACPI / DPTF: Add DPTF power participant driver
* acpi-misc:
ACPI / lpat: make it explicitly non-modular
ACPI / dock: make dock explicitly non-modular
* acpi-tools:
tools/acpi: use CROSS_COMPILE to define prefix
* acpi-pmic:
ACPI / PMIC: remove modular references from non-modular code
ACPI / PMIC: intel: initialize result to 0
ACPI / PMIC: intel: add REGS operation region support
ACPI / PMIC: Add opregion driver for Intel BXT WhiskeyCove PMIC
ACPI / PMIC: modify the pen function signature to take bit field
Conflicts:
drivers/acpi/Makefile
* acpi-processor:
ACPI: enable ACPI_PROCESSOR_IDLE on ARM64
arm64: add support for ACPI Low Power Idle(LPI)
drivers: firmware: psci: initialise idle states using ACPI LPI
cpuidle: introduce CPU_PM_CPU_IDLE_ENTER macro for ARM{32, 64}
arm64: cpuidle: drop __init section marker to arm_cpuidle_init
ACPI / processor_idle: Add support for Low Power Idle(LPI) states
ACPI / processor_idle: introduce ACPI_PROCESSOR_CSTATE
* acpi-cppc:
mailbox: pcc: Add PCC request and free channel declarations
ACPI / CPPC: Prevent cpc_desc_ptr points to the invalid data
ACPI: CPPC: Return error if _CPC is invalid on a CPU
* acpi-apei:
ACPI / APEI: Add Boot Error Record Table (BERT) support
ACPI / einj: Make error paths more talkative
ACPI / einj: Convert EINJ_PFX to proper pr_fmt
* acpi-sleep:
ACPI: Execute _PTS before system reboot
* acpi-tables:
ACPI: Rename configfs.c to acpi_configfs.c to prevent link error
ACPI: add support for loading SSDTs via configfs
ACPI: add support for configfs
efi / ACPI: load SSTDs from EFI variables
spi / ACPI: add support for ACPI reconfigure notifications
i2c / ACPI: add support for ACPI reconfigure notifications
ACPI: add support for ACPI reconfiguration notifiers
ACPI / scan: fix enumeration (visited) flags for bus rescans
ACPI / documentation: add SSDT overlays documentation
ACPI: ARM64: support for ACPI_TABLE_UPGRADE
ACPI / tables: introduce ARCH_HAS_ACPI_TABLE_UPGRADE
ACPI / tables: move arch-specific symbol to asm/acpi.h
ACPI / tables: table upgrade: refactor function definitions
ACPI / tables: table upgrade: use cacheable map for tables
Conflicts:
arch/arm64/include/asm/acpi.h
The current SPI code attempts to use bus_lock_mutex for two purposes. One
is to implement spi_bus_lock() which grants exclusive access to the bus.
The other is to serialize access to the physical hardware. This duplicate
purpose causes confusion which leads to cases where access is not locked
when a caller holds the bus lock mutex. Fix this by splitting out the I/O
functionality into a new io_mutex.
This means taking both mutexes in the DMA path, replacing the existing
mutex with the new I/O one in the message pump (the mutex now always
being taken in the message pump) and taking the bus lock mutex in
spi_sync(), allowing __spi_sync() to have no mutex handling.
While we're at it hoist the mutex further up the message pump before we
power up the device so that all power up/down of the block is covered by
it and there are no races with in-line pumping of messages.
Reported-by: Rich Felker <dalias@libc.org>
Tested-by: Rich Felker <dalias@libc.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
WDOG_HW_RUNNING indicates that the hardware watchdog is running while the
watchdog device is closed. The flag may be set by the driver when it is
instantiated to indicate that the watchdog is running, and that the
watchdog core needs to send heartbeat requests to the driver until the
watchdog device is opened.
When the watchdog device is closed, the flag can be used by the driver's
stop function to indicate to the watchdog core that it was unable to stop
the watchdog, and that the watchdog core needs to send heartbeat requests.
This only works if the flag is actually cleared when the watchdog is
stopped. To avoid having to clear the flag in each driver's stop function,
clear it in the watchdog core before calling the stop function.
Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Fixes: ee142889e3 ("watchdog: Introduce WDOG_HW_RUNNING flag")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
In case of error, the function devm_ioremap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Remove .owner field if calls are used which set it automatically.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Remove .owner field if calls are used which set it automatically.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
IOCTL_EVTCHN_RESTRICT limits the file descriptor to being able to bind
to interdomain event channels from a specific domain. Event channels
that are already bound continue to work for sending and receiving
notifications.
This is useful as part of deprivileging a user space PV backend or
device model (QEMU). e.g., Once the device model as bound to the
ioreq server event channels it can restrict the file handle so an
exploited DM cannot use it to create or bind to arbitrary event
channels.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Document support for the Watchdog Timer (WDT) Controller in the Renesas
R-Car M3-W (r8a7796) SoC.
No driver update is needed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
When mmc host HW supports busy signalling (using R1B as response), don't
use the host->max_busy_timeout as the limitation when deciding the max
discard sectors, which we inform the generic BLOCK layer about. Instead,
let's use at least one preferred erase size as the max discard sectors.
In cases when the host controller supports HW busy signalling and the
timeout for the erase operation doesn't exceed the max_busy_timeout, we
keep the R1B response, otherwise we prevent the host from doing HW busy
detection by converting to a R1 response.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
