A namespace may be detached from a controller, but a user may be holding
a reference to it. Attaching a new namespace with the same NSID will create
duplicate names when using the NSID to name the disk.
This patch uses an IDA that is released only when the last reference is
released instead of using the namespace ID.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Unmapping the registers on reset or shutdown is not necessary. Keeping
the mapping simplifies reset handling.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch applies the two introduced helpers to
figure out the 1st and last bvec.
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch applies the two introduced helpers to
figure out the 1st and last bvec, and fixes the
original way after bio splitting.
Cc: stable@vger.kernel.org
Reported-by: Sagi Grimberg <sagig@dev.mellanox.co.il>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
In the following patch, the way for figuring out
the last bvec will be changed with a bit cost introduced,
so return immediately if the queue doesn't have virt
boundary limit. Actually most of devices have not
this limit.
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The bio passed to bio_will_gap() may be fast cloned from upper
layer(dm, md, bcache, fs, ...), or from bio splitting in block
core.
Unfortunately bio_will_gap() just figures out the last bvec via
'bi_io_vec[prev->bi_vcnt - 1]' directly, and this way is obviously
wrong.
This patch introduces two helpers for getting the first and last
bvec of one bio for fixing the issue.
Cc: stable@vger.kernel.org
Reported-by: Sagi Grimberg <sagig@dev.mellanox.co.il>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This change will also make Coverity happy by avoiding a theoretical NULL
pointer dereference; yet another reason is to use the above helper function
to tighten the code and make it more readable.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change will also make Coverity happy by avoiding a theoretical NULL
pointer dereference; yet another reason is to use the above helper function
to tighten the code and make it more readable.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ibmvnic_capability struct was defined incorrectly. The last two
elements of the struct are in the wrong order. In addition, the number
element should be 64-bit. Byteswapping functions are updated
as well.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When ipv6_find_hdr is used to find a fragment header
(caller specifies target NEXTHDR_FRAGMENT) we erronously return
-ENOENT for all fragments with nonzero offset.
Before commit 9195bb8e38, when target was specified, we did not
enter the exthdr walk loop as nexthdr == target so this used to work.
Now we do (so we can skip empty route headers). When we then stumble upon
a frag with nonzero frag_off we must return -ENOENT ("header not found")
only if the caller did not specifically request NEXTHDR_FRAGMENT.
This allows nfables exthdr expression to match ipv6 fragments, e.g. via
nft add rule ip6 filter input frag frag-off gt 0
Fixes: 9195bb8e38 ("ipv6: improve ipv6_find_hdr() to skip empty routing headers")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MC74xx and EM74xx modules use different IDs by default, according
to the Lenovo EM7455 driver for Windows.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
reverts commit 94153e36e7 ("tipc: use existing sk_write_queue for
outgoing packet chain")
In Commit 94153e36e7, we assume that we fill & empty the socket's
sk_write_queue within the same lock_sock() session.
This is not true if the link is congested. During congestion, the
socket lock is released while we wait for the congestion to cease.
This implementation causes a nullptr exception, if the user space
program has several threads accessing the same socket descriptor.
Consider two threads of the same program performing the following:
Thread1 Thread2
-------------------- ----------------------
Enter tipc_sendmsg() Enter tipc_sendmsg()
lock_sock() lock_sock()
Enter tipc_link_xmit(), ret=ELINKCONG spin on socket lock..
sk_wait_event() :
release_sock() grab socket lock
: Enter tipc_link_xmit(), ret=0
: release_sock()
Wakeup after congestion
lock_sock()
skb = skb_peek(pktchain);
!! TIPC_SKB_CB(skb)->wakeup_pending = tsk->link_cong;
In this case, the second thread transmits the buffers belonging to
both thread1 and thread2 successfully. When the first thread wakeup
after the congestion it assumes that the pktchain is intact and
operates on the skb's in it, which leads to the following exception:
[2102.439969] BUG: unable to handle kernel NULL pointer dereference at 00000000000000d0
[2102.440074] IP: [<ffffffffa005f330>] __tipc_link_xmit+0x2b0/0x4d0 [tipc]
[2102.440074] PGD 3fa3f067 PUD 3fa6b067 PMD 0
[2102.440074] Oops: 0000 [#1] SMP
[2102.440074] CPU: 2 PID: 244 Comm: sender Not tainted 3.12.28 #1
[2102.440074] RIP: 0010:[<ffffffffa005f330>] [<ffffffffa005f330>] __tipc_link_xmit+0x2b0/0x4d0 [tipc]
[...]
[2102.440074] Call Trace:
[2102.440074] [<ffffffff8163f0b9>] ? schedule+0x29/0x70
[2102.440074] [<ffffffffa006a756>] ? tipc_node_unlock+0x46/0x170 [tipc]
[2102.440074] [<ffffffffa005f761>] tipc_link_xmit+0x51/0xf0 [tipc]
[2102.440074] [<ffffffffa006d8ae>] tipc_send_stream+0x11e/0x4f0 [tipc]
[2102.440074] [<ffffffff8106b150>] ? __wake_up_sync+0x20/0x20
[2102.440074] [<ffffffffa006dc9c>] tipc_send_packet+0x1c/0x20 [tipc]
[2102.440074] [<ffffffff81502478>] sock_sendmsg+0xa8/0xd0
[2102.440074] [<ffffffff81507895>] ? release_sock+0x145/0x170
[2102.440074] [<ffffffff815030d8>] ___sys_sendmsg+0x3d8/0x3e0
[2102.440074] [<ffffffff816426ae>] ? _raw_spin_unlock+0xe/0x10
[2102.440074] [<ffffffff81115c2a>] ? handle_mm_fault+0x6ca/0x9d0
[2102.440074] [<ffffffff8107dd65>] ? set_next_entity+0x85/0xa0
[2102.440074] [<ffffffff816426de>] ? _raw_spin_unlock_irq+0xe/0x20
[2102.440074] [<ffffffff8107463c>] ? finish_task_switch+0x5c/0xc0
[2102.440074] [<ffffffff8163ea8c>] ? __schedule+0x34c/0x950
[2102.440074] [<ffffffff81504e12>] __sys_sendmsg+0x42/0x80
[2102.440074] [<ffffffff81504e62>] SyS_sendmsg+0x12/0x20
[2102.440074] [<ffffffff8164aed2>] system_call_fastpath+0x16/0x1b
In this commit, we maintain the skb list always in the stack.
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The argument structs are used in arrays for G_TOPOLOGY IOCTL. The
arguments themselves do not need to be aligned to a power of two, but
aligning them up to the largest basic type alignment (u64) on common ABIs
is a good thing to do.
The patch changes the size of the reserved fields to 5 or 6 u32's and
aligns the size of the struct to 8 bytes so we do no longer depend on the
compiler to perform the alignment.
While at it, add __attribute__ ((packed)) to these structs as well.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The current reserved_tailroom calculation fails to take hlen and tlen into
account.
skb:
[__hlen__|__data____________|__tlen___|__extra__]
^ ^
head skb_end_offset
In this representation, hlen + data + tlen is the size passed to alloc_skb.
"extra" is the extra space made available in __alloc_skb because of
rounding up by kmalloc. We can reorder the representation like so:
[__hlen__|__data____________|__extra__|__tlen___]
^ ^
head skb_end_offset
The maximum space available for ip headers and payload without
fragmentation is min(mtu, data + extra). Therefore,
reserved_tailroom
= data + extra + tlen - min(mtu, data + extra)
= skb_end_offset - hlen - min(mtu, skb_end_offset - hlen - tlen)
= skb_tailroom - min(mtu, skb_tailroom - tlen) ; after skb_reserve(hlen)
Compare the second line to the current expression:
reserved_tailroom = skb_end_offset - min(mtu, skb_end_offset)
and we can see that hlen and tlen are not taken into account.
The min() in the third line can be expanded into:
if mtu < skb_tailroom - tlen:
reserved_tailroom = skb_tailroom - mtu
else:
reserved_tailroom = tlen
Depending on hlen, tlen, mtu and the number of multicast address records,
the current code may output skbs that have less tailroom than
dev->needed_tailroom or it may output more skbs than needed because not all
space available is used.
Fixes: 4c672e4b ("ipv6: mld: fix add_grhead skb_over_panic for devs with large MTUs")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here are some new device ids and a patch removing the mxu11x0 driver,
which turned out not to be needed.
Signed-off-by: Johan Hovold <johan@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=f2SZ
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Jonan writes:
USB-serial fixes for v4.5-rc7
Here are some new device ids and a patch removing the mxu11x0 driver,
which turned out not to be needed.
Signed-off-by: Johan Hovold <johan@kernel.org>
Currently, in a case of error, dev_err is using fman->dev
before its initialization and "(NULL device *)" is printed.
This patch fixes this issue.
Signed-off-by: Igal Liberman <igal.liberman@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch manages the case when you have an Ethernet MAC with
a "fixed link", and not connected to a normal MDIO-managed PHY device.
The test of phy_bus_name was not helpful because it was never affected
and replaced by the mdio test node.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix a runtime PM suspend/resume bug in the RCAR driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5Ovl
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull late GPIO fix from Linus Walleij:
"Regressions never arrive when you want them to, so here is a late fix
for the Renesas RCAR GPIO driver. It only affects that driver on the
very specific Renesas platforms:
- Fix a runtime PM suspend/resume bug in the RCAR driver"
* tag 'gpio-v4.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: rcar: Add Runtime PM handling for interrupts
Including one fix for Intel VT-d:
* Use BUS_NOTIFY_REMOVED_DEVICE notifier to unbind a device from
its domain _after_ it has been unbound from its driver. This
fixes a BUG_ON being triggered in the PCI hotplug path.
And three for AMD IOMMU:
* Add a workaround for a hardware issue with ATS in use
* Fix ATS enable/disable balance when a device is removed
* Fix a boot warning being triggered when the system has IOMMU
performance counters and PCI device 00:00.0 is not covered by
the IOMMU
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=uPsu
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"One fix for Intel VT-d:
- Use BUS_NOTIFY_REMOVED_DEVICE notifier to unbind a device from its
domain _after_ it has been unbound from its driver. This fixes a
BUG_ON being triggered in the PCI hotplug path.
And three for AMD IOMMU:
- Add a workaround for a hardware issue with ATS in use
- Fix ATS enable/disable balance when a device is removed
- Fix a boot warning being triggered when the system has IOMMU
performance counters and PCI device 00:00.0 is not covered by the
IOMMU"
* tag 'iommu-fixes-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Use BUS_NOTIFY_REMOVED_DEVICE in hotplug path
iommu/amd: Detach device from domain before removal
iommu/amd: Apply workaround for ATS write permission check
iommu/amd: Fix boot warning when device 00:00.0 is not iommu covered
This fixes two minor bugs: error handling in vhost,
and capability processing in virtio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJW1w/9AAoJECgfDbjSjVRpOwMH/10g1iyVAF7FR3RgAgcutROy
mt7RNRGhcJrccB3imWvA5llHfpEQe6b2IGRRjLpy3cHOqoytSJ8F9GbAv/Ya6rBY
ZNsapZkEacLX3Byi/Tll9C6pP7eCHswveBwreXVYpxerTuViorqU0RQXHQCY1nBa
jAHr7eHp7PlSjAKlwUX181/cDKF35VMchCE+NfSmgDFnkOMb8E3TVXqV1wuSZSaf
Ci2IgULrQQC2rzxFg/ZQePweSP9cBrhpX3c3VkVa/N0Io4DOQWLg2KUbwzrs/mel
i4rlKngwwRO0rIsWU+J5hMq4Vqg+Zv6mVQGm3FFAJWle03rUOZPYFCPwbKA6HNU=
=HeDc
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull minor virtio/vhost fixes from Michael Tsirkin:
"This fixes two minor bugs: error handling in vhost, and capability
processing in virtio"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: fix error path in vhost_init_used()
virtio-pci: read the right virtio_pci_notify_cap field
* fix hang caused by fbconsole blink timer
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8zQX
-----END PGP SIGNATURE-----
Merge tag 'fbdev-fixes-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull fbdev fix from Tomi Valkeinen:
"Fix hang caused by fbconsole blink timer"
* tag 'fbdev-fixes-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
fbcon: set a default value to blink interval
The representation of external connections got some heated
discussions recently. As we're too close to the merge window,
let's not set those entities into a stone.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Global symbols in the kernel should be prefixed by the name
of the subsystem and/or driver to avoid conflicts when all
code is built-in.
In this case, function names like 'hdmi_register' or 'hdmi_set_mode'
are way too generic for an MSM specific DRM driver, so I'm renaming
them all to msm_hdmi_* here.
I also rename a lot of the 'static' symbols along with the global
names for consistency, even though those are relatively harmless;
they might only be slightly confusing when they show up in
backtraces.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Not sure where it came from, but seem unintentional. And also not
needed on a420, so let's just drop it.
Signed-off-by: Rob Clark <robdclark@gmail.com>
We need this for GL_TIMESTAMP queries.
Note: currently only supported on a4xx.. a3xx doesn't have this
always-on counter. I think we could emulate it with the one CP
counter that is available, but for now it is of limited usefulness
on a3xx (since we can't seem to do time-elapsed queries in any sane
way with the existing firmware on a3xx, and if you are trying to do
profiling on a tiler you want time-elapsed). We can add that later
if it becomes useful.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Existing userspace wouldn't get this far, since getparam ioctl would
have failed and it would have bailed out creating a screen/context.
But all the same, we shouldn't let evil or confused userspace cause a
null ptr deref.
Signed-off-by: Rob Clark <robdclark@gmail.com>
As described in the downstream/kgsl driver:
Sometimes the RPTR shadow memory is unreliable causing timeouts
in adreno_idle(). Read it directly from the register instead.
Signed-off-by: Craig Stout <cstout@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This fixes the following build failure:
drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.o: In function `msm_dsi_pll_28nm_8960_init':
dsi_pll_28nm.c:(.text+0x1198): multiple definition of `msm_dsi_pll_28nm_8960_init'
drivers/gpu/drm/msm/dsi/pll/dsi_pll.o:dsi_pll.c:(.text+0x0): first defined here
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Acked-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The DSI driver is currently unaware of how the DSI physical data lanes
are mapped to the logical lanes provided by the DSI controller.
Create a DT binding "qcom,data-lane-map" that provides this information
on a given platform.
The MSM DSI controller is restricted in terms of what all mappings
it can support. The lane polarity is fixed for all the lanes, the clock
lanes are fixed, and the data lanes can be swapped among each other only
for a few combinations. Apply these restrictions when we parse the DT
data.
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Overlayfs must update uid/gid after chown, otherwise functions
like inode_owner_or_capable() will check user against stale uid.
Catched by xfstests generic/087, it chowns file and calls utimes.
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@vger.kernel.org>
After rename file dentry still holds reference to lower dentry from
previous location. This doesn't matter for data access because data comes
from upper dentry. But this stale lower dentry taints dentry at new
location and turns it into non-pure upper. Such file leaves visible
whiteout entry after remove in directory which shouldn't have whiteouts at
all.
Overlayfs already tracks pureness of file location in oe->opaque. This
patch just uses that for detecting actual path type.
Comment from Vivek Goyal's patch:
Here are the details of the problem. Do following.
$ mkdir upper lower work merged upper/dir/
$ touch lower/test
$ sudo mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=
work merged
$ mv merged/test merged/dir/
$ rm merged/dir/test
$ ls -l merged/dir/
/usr/bin/ls: cannot access merged/dir/test: No such file or directory
total 0
c????????? ? ? ? ? ? test
Basic problem seems to be that once a file has been unlinked, a whiteout
has been left behind which was not needed and hence it becomes visible.
Whiteout is visible because parent dir is of not type MERGE, hence
od->is_real is set during ovl_dir_open(). And that means ovl_iterate()
passes on iterate handling directly to underlying fs. Underlying fs does
not know/filter whiteouts so it becomes visible to user.
Why did we leave a whiteout to begin with when we should not have.
ovl_do_remove() checks for OVL_TYPE_PURE_UPPER() and does not leave
whiteout if file is pure upper. In this case file is not found to be pure
upper hence whiteout is left.
So why file was not PURE_UPPER in this case? I think because dentry is
still carrying some leftover state which was valid before rename. For
example, od->numlower was set to 1 as it was a lower file. After rename,
this state is not valid anymore as there is no such file in lower.
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Reported-by: Viktor Stanchev <me@viktorstanchev.com>
Suggested-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=109611
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@vger.kernel.org>
ovl_remove_upper() should do d_drop() only after it successfully
removes the dir, otherwise a subsequent getcwd() system call will
fail, breaking userspace programs.
This is to fix: https://bugzilla.kernel.org/show_bug.cgi?id=110491
Signed-off-by: Rui Wang <rui.y.wang@intel.com>
Reviewed-by: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@vger.kernel.org>
This adds missing .d_select_inode into alternative dentry_operations.
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Fixes: 7c03b5d45b ("ovl: allow distributed fs as lower layer")
Fixes: 4bacc9c923 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Reviewed-by: Nikolay Borisov <kernel@kyup.com>
Tested-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@vger.kernel.org> # 4.2+
According to IBTA spec v1.3 section 12.7.19, QPs should use GRH when
the path returned by the SA has hop-limit > 0. Currently, we do that
only for the > 1 case, fix that.
Fixes: 6d969a471b ('IB/sa: Add ib_init_ah_from_path()')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
omapdss driver now depends on omapdrm, so we no longer should select
OMAP2_DSS from omapdrm's Kconfig.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
When an error occurs in omap_gem_new() the function calls
omap_gem_free_object() to clean up. However, that function expects to be
called on a fully initialized GEM object and thus crashes.
Replace it by manual cleanup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We have removed all the uses of compat code from omapdrm and the
non-compat parts of omapdss, so now we can remove all the compat code
itself.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We have now removed all uses of 'struct omap_overlay_manager', so we can
now remove the last places where it is set.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We are removing the uses of 'struct omap_overlay_manager'. This patch
changes DSI driver to use 'omap_channel' instead.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
