We move the responsibility of managing the persistent bad block table to
the target. The target may choose to mark a block bad or retry writing
to it. Never the less, it should be the target that makes the decision
and not the media manager.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
A virtual block enables a block to identify multiple physical blocks.
This is useful for metadata where a device media supports multiple
planes. In that case, a block, with multiple planes can be managed
as a single vblk. Reducing the metadata required by one forth.
nvm_set_rqd_ppalist() takes care of expanding a ppa_list with vblks
automatically. However, for some use-cases, where only a single physical
block is required, the ppa_list should not be expanded.
Therefore, add a vblk parameter to nvm_set_rqd_ppalist(), and only
expand the ppa_list if vblk is set.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Now that device ops->get_bb_table no longer uses a callback, the
struct factory_blks can be removed.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The device ops->get_bb_tbl() takes a callback, that allows the caller
to use its own callback function to update its data structures in the
returning function.
This makes it difficult to send parameters to the callback, and usually
is circumvented by small private structures, that both carry the callers
state and any flags needed to fulfill the update.
Refactor ops->get_bb_tbl() to fill a data buffer with the status of the
blocks returned, and let the user call the callback function manually.
That will provide the necessary flags and data structures and simplify
the logic around ops->get_bb_tbl().
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Users that wish to iterate all luns on a device. Must create a
struct ppa_addr and separate iterators for channels and luns. To set the
iterators, two loops are required, one to iterate channels, and another
to iterate luns. This leads to decrease in readability.
Introduce nvm_for_each_lun_ppa, which implements the nested loop and
sets ppa, channel, and lun variable for each loop body, eliminating
the boilerplate code.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
A target name must be unique. However, a per-device registration of
targets is maintained on a dev->online_targets list, with a per-device
search for targets upon registration.
This results in a name collision when two targets, with the same name,
are created on two different targets, where the per-device list is not
shared.
Signed-off-by: Simon A. F. Lund <slund@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The functions nvm_register_target(), nvm_unregister_target() and
associated list refers to a target type that is being registered by a
target type module. Rename nvm_*_targets() to nvm_*_tgt_type(), so that
the intension is clear.
This enables target instances to use the _nvm_*_targets() naming.
Signed-off-by: Simon A. F. Lund <slund@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Since we mainly use soffset in device sector size, we therefore store
this value in rrpc->soffset, instead of the offset in 512byte sector
size. This eliminates the "(ilog2(dev->sec_size) - 9)" calculation on
each I/O.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Updated patch description.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Calculate rrpc total blocks and sectors up front, make sense
to use them. For example, we use rrpc->nr_sects to calculate rrpc
area size, but it makes no sense if we don't initialize it up front,
since it would be zero until we finish rrpc luns init.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
A memory leak occurs if the lower page table is initialized and the
following dev->lun_map fails on allocation.
Rearrange the initialization of lower page table to allow dev->lun_map
to fail gracefully without memory leak.
Reviewed by: Johannes Thumshirn <jthumshirn@suse.de>
Move kfree of dev->lun_map to nvm_free()
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The get block table command returns a list of blocks and planes
with their associated state. Users, such as gennvm and sysblk,
manages all planes as a single virtual block.
It was therefore natural to fold the bad block list before it is
returned. However, to allow users, which manages on a per-plane
block level, to also use the interface, the get_bb_tbl interface is
changed to not fold by default and instead let the caller fold if
necessary.
Reviewed by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The flash page size (fpg) and size across planes (pfpg) are convenient
to know when allocating buffer sizes. This has previously been a
calculated in various places. Replace with the pre-calculated values.
Reviewed by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The nvm_submit_ppa function assumes that users manage all plane
blocks as a single block. Extend the API with nvm_submit_ppa_list
to allow the user to send its own ppa list. If the user submits more
than a single PPA, the user must take care to allocate and free
the corresponding ppa list.
Reviewed by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The device ->submit_io() callback might fail to submit I/O to device.
In that case, the nvm_submit_ppa function should not wait for
completion. Instead return the ->submit_io() error.
Reviewed by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
This fixes the following warnings:
drivers/lightnvm/sysblk.c:125:9: warning: ‘ret’ may be used
uninitialized in this function
drivers/lightnvm/sysblk.c:275:15: warning: ‘ret’ may be used
uninitialized in this function
In both cases, ret is only set from within a loop that may not be entered.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
By default, rproc_fw_boot() needs to wait for rproc to be configured,
but a race may occur when using rpmsg/virtio. In this case, it can
be called locally in a safe manor.
This patch represents two usecases:
- External call (via exported rproc_boot()), which waits
- Internal call can use 'nowait' version of rproc_boot()
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
- Add a check for the case that both the cropcap and g_selection ops
are NULL. This shouldn't happen, but I feel happier if the code
guards against this.
- If g_selection exists, then ignore ENOTTY and ENOIOCTLCMD error
codes from cropcap. Just assume square pixelaspect ratio in that
case. This situation can happen if the bridge driver's cropcap op
calls the corresponding subdev's op. So the cropcap ioctl is set,
but it might return ENOIOCTLCMD anyway. In the past this would
just return an error which is wrong.
- Call cropcap first and let g_selection overwrite the bounds and
defrect. This safeguards against subdev cropcap implementations
that set those rectangles as well. What g_selection returns has
priority over what such cropcap implementations return.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Pull perf fixes from Ingo Molnar:
"This tree contains two fixes: new Intel CPU model numbers and an
AMD/iommu uncore PMU driver fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/amd/iommu: Do not register a task ctx for uncore like PMUs
perf/x86: Add model numbers for Kabylake CPUs
Some sensors (like the one in Nokia N900) provide metadata in the first
couple of lines. Make that information information available to the
pipeline.
Use u16 instead, this is a 16-bit value.
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The devm_gpiod_get() function returns either a valid pointer to
struct gpio_desc or ERR_PTR() error value, check for NULL is bogus.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Pull EFI fixes from Ingo Molnar:
"This tree contains three fixes: a console spam fix, a file pattern fix
and a sysfb_efi fix for a bug that triggered on older ThinkPads"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sysfb_efi: Fix valid BAR address range check
x86/efi-bgrt: Switch all pr_err() to pr_notice() for invalid BGRT
MAINTAINERS: Remove asterisk from EFI directory names
Pull parisc fix from Helge Deller:
"Patch from Dmitry V Levin to fix a kernel crash when a straced process
calls the (invalid) syscall which is equal to value of __NR_Linux_syscalls"
* 'parisc-4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: fix a bug when syscall number of tracee is __NR_Linux_syscalls
- Fix for PTE truncation in PAE40 builds
- Fix for big endian IO accessors lacking IO barrier
- Allow HIGHMEM to work with low physical addresses
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bf8d
-----END PGP SIGNATURE-----
Merge tag 'arc-4.6-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
"Late in the cycle, but this has fixes for couple of issues: a PAE40
boot crash and Arnd spotting lack of barriers in BE io-accessors.
The 3rd patch for enabling highmem in low physical mem ;-) honestly is
more than a "fix" but its been in works for some time, seems to be
stable in testing and enables 2 of our customers to go forward with
4.6 kernel.
- Fix for PTE truncation in PAE40 builds
- Fix for big endian IO accessors lacking IO barrier
- Allow HIGHMEM to work with low physical addresses"
* tag 'arc-4.6-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: support HIGHMEM even without PAE40
ARC: Fix PAE40 boot failures due to PTE truncation
ARC: Add missing io barriers to io{read,write}{16,32}be()
Existing drivers and examples are updated to use the
module_rpmsg_driver helper macro.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch introduces the module_rpmsg_driver macro which is a
convenience macro for rpmsg driver modules similar to
module_platform_driver. It is intended to be used by drivers which
init/exit section does nothing but register/unregister the rpmsg driver.
By using this macro it is possible to eliminate a few lines of
boilerplate code per rpmsg driver.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
An rpmsg_driver does not need to set an owner, it will be populated by
the driver core.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add register_rpmsg_driver helper macro that adds THIS_MODULE to
rpmsg_driver for the registering driver. We rename and modify
the existing register_rpmsg_driver to enable this.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
- Fix bad inline asm constraint in create_zero_mask() from Anton Blanchard
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=IkNh
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"Fix bad inline asm constraint in create_zero_mask() from Anton
Blanchard"
* tag 'powerpc-4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Fix bad inline asm constraint in create_zero_mask()
Pull drm fixes from Dave Airlie:
"Fixes for i915, amdgpu/radeon and imx.
The IMX fix is for an autoloading regression found in Fedora. The
radeon fixes, are the same fix to amdgpu/radeon to avoid a hardware
lockup in some circumstances with a bad mode, and a double free bug I
took a few hours chasing down the other morning.
The i915 fixes are across the board, all stable material, and fixing
some hangs and suspend/resume issues, along with a live status
regressions"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading
drm/amdgpu: make sure vertical front porch is at least 1
drm/radeon: make sure vertical front porch is at least 1
drm/amdgpu: set metadata pointer to NULL after freeing.
drm/i915: Make RPS EI/thresholds multiple of 25 on SNB-BDW
drm/i915: Fake HDMI live status
drm/i915: Fix eDP low vswing for Broadwell
drm/i915/ddi: Fix eDP VDD handling during booting and suspend/resume
drm/i915: Fix system resume if PCI device remained enabled
drm/i915: Avoid stalling on pending flips for legacy cursor updates
I had relied on the kbuild robot for cross build coverage, however it
only builds alpha_defconfig. Switch from HPAGE_SIZE to PMD_SIZE, which
is more widely defined.
Fixes: 658922e57b ("libnvdimm, pfn: fix memmap reservation sizing")
Cc: <stable@vger.kernel.org>
Reported-by: Guenter Roeck <guenter@roeck-us.net>
Tested-by: Guenter Roeck <guenter@roeck-us.net>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Just dereference match->of_node once instead of using match->of_node.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Stop the palmas regulator driver from imagining that the allocations
will always succeed. Since regulator dt nodes are optional in nature and
can be described in downstream drivers via platform data, continue to
maintain code flow as prior when of node is not found.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Converting dt to platform data logic involves picking up information
that is unique per regulator, however we can improve readability of
the code by allocating and referencing pdata->reg_init[idx] once in
the loop.
While at it, use sizeof(*pointer) when allocating pointer. This allows
for structure name changes with minimal code change.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Converting dt to platform data logic involves picking up information
that is unique per regulator, however we can improve readability of
the code by dereferencing ddata->palmas_matches[idx] once in the loop.
While at it fix reuse of generic palmas_matches common variable
while reporting error for a specific regulator (which may be from
65917/palmas list).
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
With the newly introduced helper functions the skb pulling is hidden
in the checksumming function - and undone before returning to the
caller.
The IGMP and MLD query parsing functions in the bridge still
assumed that the skb is pointing to the beginning of the IGMP/MLD
message while it is now kept at the beginning of the IPv4/6 header.
If there is a querier somewhere else, then this either causes
the multicast snooping to stay disabled even though it could be
enabled. Or, if we have the querier enabled too, then this can
create unnecessary IGMP / MLD query messages on the link.
Fixing this by taking the offset between IP and IGMP/MLD header into
account, too.
Fixes: 9afd85c9e4 ("net: Export IGMP/MLD message validation code")
Reported-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
Skylake adjusts some register locations, but otherwise follows the
existing model quite closely. I was able to verify that the 'ce_count'
increments when 'bad dimms' are used. The accounting of 'ce_count' and
'ue_count' is the primary functionality of interest for us. Tested on
Intel(R) Xeon(R) CPU E3-1260L v5 @ 2.90GHz.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1462547927-22679-1-git-send-email-jbaron@akamai.com
Signed-off-by: Borislav Petkov <bp@suse.de>
To reduce the size of builtin-trace.c.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vb8dpy7bptkf219q5c25ulfp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To reduce the size of builtin-trace.c.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-jt293541hv9od7gqw6lilioh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To reduce the size of builtin-trace.c.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qecqxwwtreio6eaatfv58yq5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add debug output of raw counter values per CPU when perf stat -v is
specified, together with their cpu numbers. This is very useful to
debug problems with per core counters, where we can normally only see
aggregated values.
v2: Make it depend on -vv, not -v
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461787251-6702-12-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update the export-to-postgresql.py to support the newly introduced
callchain export.
callchains are added into the existing call_paths table and can now
be associated with samples when the "callpaths" commandline option
is used with the script.
Ex.:
$ perf script -s export-to-postgresql.py example_db all callchains
Includes the following changes to enable callchain export via the python export
APIs:
- Add the "callchains" commandline option, which is used to enable
callchain export by setting the perf_db_export_callchains global
- Add perf_db_export_callchains checks for call_path table creation
and population.
- Add call_path_id to samples_table to conform with the new API
example usage and output using a small test app:
test_app.c:
volatile int x = 0;
void inc_x_loop()
{
int i;
for(i=0; i<100000000; i++)
x++;
}
void a()
{
inc_x_loop();
}
void b()
{
inc_x_loop();
}
int main()
{
a();
b();
return 0;
}
example usage:
$ gcc -g -O0 test_app.c
$ perf record --call-graph=dwarf ./a.out
[ perf record: Woken up 77 times to write data ]
[ perf record: Captured and wrote 19.373 MB perf.data (2404 samples) ]
$ perf script -s scripts/python/export-to-postgresql.py
example_db all callchains
$ psql example_db
example_db=#
SELECT
(SELECT name FROM symbols WHERE id = cps.symbol_id) as symbol,
(SELECT name FROM symbols WHERE id =
(SELECT symbol_id from call_paths where id = cps.parent_id))
as parent_symbol,
sum(period) as event_count
FROM samples join call_paths as cps on call_path_id = cps.id
GROUP BY cps.id,evsel_id
ORDER BY event_count DESC
LIMIT 5;
symbol | parent_symbol | event_count
------------------+--------------------------+-------------
inc_x_loop | a | 734250982
inc_x_loop | b | 731028057
unknown | unknown | 1335858
task_tick_fair | scheduler_tick | 1238842
update_wall_time | tick_do_update_jiffies64 | 650373
(5 rows)
The above data shows total "self time" in cycles for each call path that was
sampled. It is intended to demonstrate how it accounts separately for the two
ways to reach the "inc_x_loop" function(via "a" and "b"). Recursive common
table expressions can be used as well to get cumulative time spent in a
function as well, but that is beyond the scope of this basic example.
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461831551-12213-7-git-send-email-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This change allows python scripts to be able to utilize the recent
changes to the db export api allowing the export of call_paths derived
from sampled callchains. These call paths are also now associated with
the samples from which they were derived.
- This feature is enabled by setting "perf_db_export_callchains" to true
- When enabled, samples that have callchain information will have the
callchains exported via call_path_table
- The call_path_id field is added to sample_table to enable association of
samples with the corresponding callchain stored in the call paths
table. A call_path_id of 0 will be exported if there is no
corresponding callchain.
- When "perf_db_export_callchains" and "perf_db_export_calls" are both
set to True, the call path root data structure will be shared. This
prevents duplicating of data and call path ids that would result from
building two separate call path trees in memory.
- The call_return_processor structure definition was relocated to the header
file to make its contents visible to db-export.c. This enables the
sharing of call path trees between the two features, as mentioned
above.
This change is visible to python scripts using the python db export api.
The change is backwards compatible with scripts written against the
previous API, assuming that the scripts model the sample_table function
after the one in export-to-postgresql.py script by allowing for
additional arguments to be added in the future. ie. using *x as the
final argument of the sample_table function.
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461831551-12213-6-git-send-email-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The exported sample now contains a reference to the call_path_id that
represents its callchain.
While callchains themselves are nice to have, being able to associate
them with samples makes them much more useful, and can allow for such
things as determining how much cumulative time is spent in a particular
function. This information is normally possible to get from the call
return processor. However, when doing normal sampling, call/return
information is not available, thus necessitating the need for
associating samples directly with call paths.
This commit include changes to db-export layer to make this information
available for subsequent patches in this change set, but by itself, does
not make any changes visible to the user.
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461831551-12213-5-git-send-email-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This change enables the db export api to export callchains. This is
accomplished by adding callchains obtained from samples to the
call_path_root structure and exporting them via the current call path
export API.
While the current API does support exporting call paths, this is not
supported when sampling. This commit addresses that missing feature by
allowing the export of call paths when callchains are present in
samples.
Summary:
- This feature is activated by initializing the call_path_root member
inside the db_export structure to a non-null value.
- Callchains are resolved with thread__resolve_callchain() and then stored
and exported by adding a call path under call path root.
- Symbol and DSO for each callchain node are exported via db_ids_from_al()
This commit puts in place infrastructure to be used by subsequent commits,
and by itself, does not introduce any user-visible changes.
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461831551-12213-4-git-send-email-cphlipot0@gmail.com
[ Made adjustments suggested by Adrian Hunter, see thread via this cset's Link: tag ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the call path handling code out of thread-stack.c and
thread-stack.h to allow other components that are not part of
thread-stack to create call paths.
Summary:
- Create call-path.c and call-path.h and add them to the build.
- Move all call path related code out of thread-stack.c and thread-stack.h
and into call-path.c and call-path.h.
- A small subset of structures and functions are now visible through
call-path.h, which is required for thread-stack.c to continue to
compile.
This change is a prerequisite for subsequent patches in this change set
and by itself contains no user-visible changes.
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461831551-12213-3-git-send-email-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The usage of slash character causes failure when creating regulator
debugfs entry.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
[k.kozlowski: Write commit message]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
The MFC nodes with the memory regions reserved for memory allocations
are missing in the Exynos5420 Peach Pit and Exynos5800 Peach Pi DTS.
This causes the s5p-mfc driver probe to fail with the following error:
[ 4.140647] s5p_mfc_alloc_memdevs:1072: Failed to declare coherent memory for MFC device
[ 4.216163] s5p-mfc: probe of 11000000.codec failed with error -12
Add the missing nodes so the driver probes and the {en,de}coder video
nodes are registered correctly:
[ 4.096277] s5p-mfc 11000000.codec: decoder registered as /dev/video4
[ 4.102282] s5p-mfc 11000000.codec: encoder registered as /dev/video5
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Enable CGROUPS support, so we can boot userspace that uses systemd on
top of kernel configured using this defconfig. The systemd userspace
depends on cgroups and without them, it dies in mysterious ways.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
