Add mdio_support and lp_advertising fields to ethtool_cmd. Set these
in mdio45_ethtool_gset{,_npage}().
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This implements the ETHTOOL_SPAUSEPARAM operation for MDIO (clause 45)
PHYs with auto-negotiation MMDs.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This converts flow control capabilites to an advertising mask and can
be useful in combination with mii_resolve_flowctrl_fdx().
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a shorter and more comprehensible formulation of the
conditions for each flow control mode.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These roughly mirror many of the MII library functions and are based
on code from the sfc driver.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IEEE 802.3 clause 45 specifies the MDIO interface and registers for
use in 10G and other PHYs, similar to the MII management interface.
PHYs may have up to 32 MMDs corresponding to different sub-layers and
functions, each with up to 65536 registers. These are addressed by
PRTAD (similar to the MII PHY address) and DEVAD. Define a mapping
for specifying PRTAD and DEVAD through the existing MII ioctls.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a PORT_OTHER to represent all other physical port types. Current
NICs generally do not allow switching between multiple port types in
software so specific types should not be needed.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't flush inherited SIGKILL during execve() in SELinux's post cred commit
hook. This isn't really a security problem: if the SIGKILL came before the
credentials were changed, then we were right to receive it at the time, and
should honour it; if it came after the creds were changed, then we definitely
should honour it; and in any case, all that will happen is that the process
will be scrapped before it ever returns to userspace.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
ext4 supports a real NFSv4 change attribute, which is bumped whenever
the ctime would be updated, including times when two updates arrive
within a jiffy of each other. (Note that although ext4 has space for
nanosecond-precision ctime, the real resolution is lower: it actually
uses jiffies as the time-source.) This ensures clients will invalidate
their caches when they need to.
There is some fear that keeping the i_version up-to-date could have
performance drawbacks, so for now it's turned on only by a mount option.
We hope to do something better eventually.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Theodore Tso <tytso@mit.edu>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (24 commits)
e100: do not go D3 in shutdown unless system is powering off
netfilter: revised locking for x_tables
Bluetooth: Fix connection establishment with low security requirement
Bluetooth: Add different pairing timeout for Legacy Pairing
Bluetooth: Ensure that HCI sysfs add/del is preempt safe
net: Avoid extra wakeups of threads blocked in wait_for_packet()
net: Fix typo in net_device_ops description.
ipv4: Limit size of route cache hash table
Add reference to CAPI 2.0 standard
Documentation/isdn/INTERFACE.CAPI
update Documentation/isdn/00-INDEX
ixgbe: Fix WoL functionality for 82599 KX4 devices
veth: prevent oops caused by netdev destructor
xfrm: wrong hash value for temporary SA
forcedeth: tx timeout fix
net: Fix LL_MAX_HEADER for CONFIG_TR_MODULE
mlx4_en: Handle page allocation failure during receive
mlx4_en: Fix cleanup flow on cq activation
vlan: update vlan carrier state for admin up/down
netfilter: xt_recent: fix stack overread in compat code
...
Much like the atomic_dec_and_lock() function in which we take an hold a
spin_lock if we drop the atomic to 0 this function takes and holds the
mutex if we dec the atomic to 0.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090323172417.410913479@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The type of counter index is sometimes implemented as unsigned
int. This patch changes this to have a consistent usage of int.
[ Impact: cleanup ]
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1241002046-8832-21-git-send-email-robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch renames struct hw_perf_counter_ops into struct pmu. It
introduces a structure to describe a cpu specific pmu (performance
monitoring unit). It may contain ops and data. The new name of the
structure fits better, is shorter, and thus better to handle. Where it
was appropriate, names of function and variable have been changed too.
[ Impact: cleanup ]
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1241002046-8832-7-git-send-email-robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This is only needed for CONFIG_PERF_COUNTERS enabled.
[ Impact: cleanup ]
Signed-off-by: Robert Richter <robert.richter@amd.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1241002046-8832-3-git-send-email-robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Replace the current event parser hack with a better one. Filters are
no longer specified predicate by predicate, but all at once and can
use parens and any of the following operators:
numeric fields:
==, !=, <, <=, >, >=
string fields:
==, !=
predicates can be combined with the logical operators:
&&, ||
examples:
"common_preempt_count > 4" > filter
"((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter
If there was an error, the erroneous string along with an error
message can be seen by looking at the filter e.g.:
((sig >= 10 && sig < 15) || dsig == 17) && comm != bash
^
parse_error: Field not found
Currently the caret for an error always appears at the beginning of
the filter; a real position should be used, but the error message
should be useful even without it.
To clear a filter, '0' can be written to the filter file.
Filters can also be set or cleared for a complete subsystem by writing
the same filter as would be written to an individual event to the
filter file at the root of the subsytem. Note however, that if any
event in the subsystem lacks a field specified in the filter being
set, the set will fail and all filters in the subsytem are
automatically cleared. This change from the previous version was made
because using only the fields that happen to exist for a given event
would most likely result in a meaningless filter.
Because the logical operators are now implemented as predicates, the
maximum number of predicates in a filter was increased from 8 to 16.
[ Impact: add new, extended trace-filter implementation ]
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1240905899.6416.121.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The new filter comparison ops need to be able to distinguish between
signed and unsigned field types, so add an is_signed flag/param to the
event field struct/trace_define_fields(). Also define a simple macro,
is_signed_type() to determine the signedness at compile time, used in the
trace macros. If the is_signed_type() macro won't work with a specific
type, a new slightly modified version of TRACE_FIELD() called
TRACE_FIELD_SIGN(), allows the signedness to be set explicitly.
[ Impact: extend trace-filter code for new feature ]
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1240905893.6416.120.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Create a new event_filter object, and move the pred-related members
out of the call and subsystem objects and into the filter object - the
details of the filter implementation don't need to be exposed in the
call and subsystem in any case, and it will also help make the new
parser implementation a little cleaner.
[ Impact: refactor trace-filter code to prepare for new features ]
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1240905887.6416.119.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Follow up to afcfe024ae in Linus' tree
("x86: mmiotrace: quieten spurious warning message")
Signed-off-by: Stuart Bennett <stuart@freedesktop.org>
Acked-by: Pekka Paalanen <pq@iki.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1240946271-7083-5-git-send-email-stuart@freedesktop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The patch adds kernel parameter intel_iommu=pt to set up pass through
mode in context mapping entry. This disables DMAR in linux kernel; but
KVM still runs on VT-d and interrupt remapping still works.
In this mode, kernel uses swiotlb for DMA API functions but other VT-d
functionalities are enabled for KVM. KVM always uses multi level
translation page table in VT-d. By default, pass though mode is disabled
in kernel.
This is useful when people don't want to enable VT-d DMAR in kernel but
still want to use KVM and interrupt remapping for reasons like DMAR
performance concern or debug purpose.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Weidong Han <weidong@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
The x_tables are organized with a table structure and a per-cpu copies
of the counters and rules. On older kernels there was a reader/writer
lock per table which was a performance bottleneck. In 2.6.30-rc, this
was converted to use RCU and the counters/rules which solved the performance
problems for do_table but made replacing rules much slower because of
the necessary RCU grace period.
This version uses a per-cpu set of spinlocks and counters to allow to
table processing to proceed without the cache thrashing of a global
reader lock and keeps the same performance for table updates.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add regulator header file missing kernel-doc:
Warning(include/linux/regulator/driver.h:117): No description found for parameter 'set_mode'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
cc: Liam Girdwood <lrg@slimlogic.co.uk>
cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Adjust the synopsis of svc_sock_names() to pass in the size of the
output buffer. Add a documenting comment.
This is a cosmetic change for now. A subsequent patch will make sure
the buffer length is passed to one_sock_name(), where the length will
actually be useful.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Adjust the synopsis of svc_addsock() to pass in the size of the output
buffer. Add a documenting comment.
This is a cosmetic change for now. A subsequent patch will make sure
the buffer length is passed to one_sock_name(), where the length will
actually be useful.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The svc_xprt_names() function can overflow its buffer if it's so near
the end of the passed in buffer that the "name too long" string still
doesn't fit. Of course, it could never tell if it was near the end
of the passed in buffer, since its only caller passes in zero as the
buffer length.
Let's make this API a little safer.
Change svc_xprt_names() so it *always* checks for a buffer overflow,
and change its only caller to pass in the correct buffer length.
If svc_xprt_names() does overflow its buffer, it now fails with an
ENAMETOOLONG errno, instead of trying to write a message at the end
of the buffer. I don't like this much, but I can't figure out a clean
way that's always safe to return some of the names, *and* an
indication that the buffer was not long enough.
The displayed error when doing a 'cat /proc/fs/nfsd/portlist' is
"File name too long".
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The svc_addr_len() helper function returns -EAFNOSUPPORT if it doesn't
recognize the address family of the passed-in socket address. However,
the return type of this function is size_t, which means -EAFNOSUPPORT
is turned into a very large positive value in this case.
The check in svc_udp_recvfrom() to see if the return value is less
than zero therefore won't work at all.
Additionally, handle_connect_req() passes this value directly to
memset(). This could cause memset() to clobber a large chunk of memory
if svc_addr_len() has returned an error. Currently the address family
of these addresses, however, is known to be supported long before
handle_connect_req() is called, so this isn't a real risk.
Change the error return value of svc_addr_len() to zero, which fits in
the range of size_t, and is safer to pass to memset() directly.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
In order to utilize the full power of the new multi-touch devices, a
way to report detailed finger data to user space is needed. This patch
adds a multi-touch (MT) protocol which allows drivers to report details
for an arbitrary number of fingers.
The driver sends a SYN_MT_REPORT event via the input_mt_sync() function
when a complete finger has been reported.
In order to stay compatible with existing applications, the data
reported in a finger packet must not be recognized as single-touch
events. In addition, all finger data must bypass input filtering,
since subsequent events of the same type refer to different fingers.
A set of ABS_MT events with the desired properties are defined. The
events are divided into categories, to allow for partial implementation.
The minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked.
If the device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide
the size of the approaching finger. Anisotropy and direction may be
specified with ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and
ABS_MT_ORIENTATION. Devices with more granular information may specify
general shapes as blobs, i.e., as a sequence of rectangular shapes
grouped together by a ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE
may be used to specify whether the touching tool is a finger or a pen.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
The integrated button on the new unibody Macbooks presents a need to
report explicit four-finger actions. Evidently, the finger pressing
the button is also touching the trackpad, so in order to fully support
three-finger actions, the driver must be able to report four-finger
actions. This patch adds a new button, BTN_TOOL_QUADTAP, which
achieves this.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
netif_tx_queue_stopped(txq) is most of the time false.
Yet its cost is very expensive on SMP.
static inline int netif_tx_queue_stopped(const struct netdev_queue *dev_queue)
{
return test_bit(__QUEUE_STATE_XOFF, &dev_queue->state);
}
I saw this on oprofile hunting and bnx2 driver bnx2_tx_int().
We probably should split "struct netdev_queue" in two parts, one
being read mostly.
__netif_tx_lock() touches _xmit_lock & xmit_lock_owner, these
deserve a separate cache line.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Try to get irq_desc on the home node in create_irq_nr().
v2: don't check if we can move it when sparse_irq is not used
v3: use move_irq_des, if that node is not what we want
[ Impact: optimization, make MSI IRQ descriptors more NUMA aware ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <49F6559F.7070005@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We want to use dev_to_node() later on, to be aware of the 'home node'
of the GSI in question.
[ Impact: cleanup, prepare the IRQ code to be more NUMA aware ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Len Brown <lenb@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Len Brown <lenb@kernel.org>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
LKML-Reference: <49F65560.20904@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This simplifies the node awareness of the code. All our allocators
only deal with a NUMA node ID locality not with CPU ids anyway - so
there's no need to maintain (and transform) a CPU id all across the
IRq layer.
v2: keep move_irq_desc related
[ Impact: cleanup, prepare IRQ code to be NUMA-aware ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
LKML-Reference: <49F65536.2020300@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
according to Ingo, change set_affinity() in irq_chip should return int,
because that way we can handle failure cases in a much cleaner way, in
the genirq layer.
v2: fix two typos
[ Impact: extend API ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: linux-arch@vger.kernel.org
LKML-Reference: <49F654E9.4070809@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The original feature of migrating irq_desc dynamic was too fragile
and was causing problems: it caused crashes on systems with lots of
cards with MSI-X when user-space irq-balancer was enabled.
We now have new patches that create irq_desc according to device
numa node. This patch removes the leftover bits of the dynamic balancer.
[ Impact: remove dead code ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <49F654AF.8000808@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
CPUMASKS_OFFSTACK is not defined anywhere (it is CPUMASK_OFFSTACK).
It is a typo and init_allocate_desc_masks() is called before it set
affinity to all cpus...
Split init_alloc_desc_masks() into all_desc_masks() and init_desc_masks().
Also use CPUMASK_OFFSTACK in alloc_desc_masks().
[ Impact: fix smp_affinity copying/setup when moving irq_desc between CPUs ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
LKML-Reference: <49F6546E.3040406@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In 2.6.25 we added UDP mem accounting.
This unfortunatly added a penalty when a frame is transmitted, since
we have at TX completion time to call sock_wfree() to perform necessary
memory accounting. This calls sock_def_write_space() and utimately
scheduler if any thread is waiting on the socket.
Thread(s) waiting for an incoming frame was scheduled, then had to sleep
again as event was meaningless.
(All threads waiting on a socket are using same sk_sleep anchor)
This adds lot of extra wakeups and increases latencies, as noted
by Christoph Lameter, and slows down softirq handler.
Reference : http://marc.info/?l=linux-netdev&m=124060437012283&w=2
Fortunatly, Davide Libenzi recently added concept of keyed wakeups
into kernel, and particularly for sockets (see commit
37e5540b3c
epoll keyed wakeups: make sockets use keyed wakeups)
Davide goal was to optimize epoll, but this new wakeup infrastructure
can help non epoll users as well, if they care to setup an appropriate
handler.
This patch introduces new DEFINE_WAIT_FUNC() helper and uses it
in wait_for_packet(), so that only relevant event can wakeup a thread
blocked in this function.
Trace of function calls from bnx2 TX completion bnx2_poll_work() is :
__kfree_skb()
skb_release_head_state()
sock_wfree()
sock_def_write_space()
__wake_up_sync_key()
__wake_up_common()
receiver_wake_function() : Stops here since thread is waiting for an INPUT
Reported-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
this is the sctp code to enable hardware crc32c offload for
adapters that support it.
Originally by: Vlad Yasevich <vladislav.yasevich@hp.com>
modified by Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is V2 of the smsc911x fifo byteswap patch.
The smsc911x hardware supports both big and little and endian
hardware configurations, and the linux smsc911x driver currently
detects word order.
For correct operation on big endian platforms lacking swapped
byte lanes the following patch is needed. Only fifo data is
swapped, register data does not require any swapping.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
include/linux/mg_disk.h is used only by drivers/block/mg_disk.c. No
reason to put it in a separate header. Fold it into mg_disk.c.
[ Impact: cleanup ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: unsik Kim <donari75@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
In the process of mindlessly copying [__]blk_end_request_all(),
[__]blk_end_request_cur() ended up returning void even though they're
partial completion functions. Fix it.
[ Impact: fix braindead API ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Now that all block request data transfer is done via bio, rq->data
isn't used. Kill it.
While at it, make the roles of rq->special and buffer clear.
[ Impact: drop now unncessary field from struct request ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Boaz Harrosh <bharrosh@panasas.com>
end_request() has been kept around for backward compatibility;
however, it's about time for it to go away.
* There aren't too many users left.
* Its use of @updtodate is pretty confusing.
* In some cases, newer code ends up using mixture of end_request() and
[__]blk_end_request[_all](), which is way too confusing.
So, add [__]blk_end_request_cur() and replace end_request() with it.
Most conversions are straightforward. Noteworthy ones are...
* paride/pcd: next_request() updated to take 0/-errno instead of 1/0.
* paride/pf: pf_end_request() and next_request() updated to take
0/-errno instead of 1/0.
* xd: xd_readwrite() updated to return 0/-errno instead of 1/0.
* mtd/mtd_blkdevs: blktrans_discard_request() updated to return
0/-errno instead of 1/0. Unnecessary local variable res
initialization removed from mtd_blktrans_thread().
[ Impact: cleanup ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Joerg Dorchain <joerg@dorchain.net>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Laurent Vivier <Laurent@lvivier.info>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: unsik Kim <donari75@gmail.com>
There are many [__]blk_end_request() call sites which call it with
full request length and expect full completion. Many of them ensure
that the request actually completes by doing BUG_ON() the return
value, which is awkward and error-prone.
This patch adds [__]blk_end_request_all() which takes @rq and @error
and fully completes the request. BUG_ON() is added to to ensure that
this actually happens.
Most conversions are simple but there are a few noteworthy ones.
* cdrom/viocd: viocd_end_request() replaced with direct calls to
__blk_end_request_all().
* s390/block/dasd: dasd_end_request() replaced with direct calls to
__blk_end_request_all().
* s390/char/tape_block: tapeblock_end_request() replaced with direct
calls to blk_end_request_all().
[ Impact: cleanup ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Request completion has gone through several changes and became a bit
messy over the time. Clean it up.
1. end_that_request_data() is a thin wrapper around
end_that_request_data_first() which checks whether bio is NULL
before doing anything and handles bidi completion.
blk_update_request() is a thin wrapper around
end_that_request_data() which clears nr_sectors on the last
iteration but doesn't use the bidi completion.
Clean it up by moving the initial bio NULL check and nr_sectors
clearing on the last iteration into end_that_request_data() and
renaming it to blk_update_request(), which makes blk_end_io() the
only user of end_that_request_data(). Collapse
end_that_request_data() into blk_end_io().
2. There are four visible completion variants - blk_end_request(),
__blk_end_request(), blk_end_bidi_request() and end_request().
blk_end_request() and blk_end_bidi_request() uses blk_end_request()
as the backend but __blk_end_request() and end_request() use
separate implementation in __blk_end_request() due to different
locking rules.
blk_end_bidi_request() is identical to blk_end_io(). Collapse
blk_end_io() into blk_end_bidi_request(), separate out request
update into internal helper blk_update_bidi_request() and add
__blk_end_bidi_request(). Redefine [__]blk_end_request() as thin
inline wrappers around [__]blk_end_bidi_request().
3. As the whole request issue/completion usages are about to be
modified and audited, it's a good chance to convert completion
functions return bool which better indicates the intended meaning
of return values.
4. The function name end_that_request_last() is from the days when it
was a public interface and slighly confusing. Give it a proper
internal name - blk_finish_request().
5. Add description explaning that blk_end_bidi_request() can be safely
used for uni requests as suggested by Boaz Harrosh.
The only visible behavior change is from #1. nr_sectors counts are
cleared after the final iteration no matter which function is used to
complete the request. I couldn't find any place where the code
assumes those nr_sectors counters contain the values for the last
segment and this change is good as it makes the API much more
consistent as the end result is now same whether a request is
completed using [__]blk_end_request() alone or in combination with
blk_update_request().
API further cleaned up per Christoph's suggestion.
[ Impact: cleanup, rq->*nr_sectors always updated after req completion ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Boaz Harrosh <bharrosh@panasas.com>
Cc: Christoph Hellwig <hch@infradead.org>
With recent IDE updates, blk_end_request_callback() doesn't have any
user now. Kill it.
[ Impact: removal of unused convoluted interface ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Reorder request completion functions such that
* All request completion functions are located together.
* Functions which are used by only one caller is put right above the
caller.
* end_request() is put after other completion functions but before
blk_update_request().
This change is for completion function cleanup which will follow.
[ Impact: cleanup, code reorganization ]
Signed-off-by: Tejun Heo <tj@kernel.org>
blk_start_queueing() is identical to __blk_run_queue() except that it
doesn't check for recursion. None of the current users depends on
blk_start_queueing() running request_fn directly. Replace usages of
blk_start_queueing() with [__]blk_run_queue() and kill it.
[ Impact: removal of mostly duplicate interface function ]
Signed-off-by: Tejun Heo <tj@kernel.org>
