All switch models configure the GLOBAL_CONTROL register with slightly
differences.
Discarding packets with excessive collisions
(GLOBAL_CONTROL_DISCARD_EXCESS) is specific to 6352 and similar
switches, and setting a maximum frame size
(GLOBAL_CONTROL_MAX_FRAME_1632) is specific to 6185 and similar
switches.
As we are centralizing the chips setup, skip these settings and don't
discard any frames yet, until we found out that such discarding by the
hardware is necessary.
Assume a common setup to enable the PHY Polling Unit if present, don't
discard any packets, and mask all interrupt sources.
Tested on 88E6352 and 88E6185.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Every driver is calling mv88e6xxx_setup_global after
mv88e6xxx_setup_common. Call the former in the latter.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a MV88E6XXX_FLAG_PPU_ACTIVE flag to describe how to reset the
switch, and merge the reset call to the common setup code.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a MV88E6XXX_FLAG_ATU flag to identify switch models with an Address
Translation Unit.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a MV88E6XXX_FLAG_VTU flag to indentify switch models with a VLAN
Table Unit.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add MV88E6XXX_FLAG_PORTSTATE and MV88E6XXX_FLAG_VLANTABLE flags to
identify switch models with required 802.1D operations.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only 6131 was not supporting the port registers access yet. Assume such
support and use the unlock access routines in the meantime.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a MV88E6XXX_FLAG_EEE flag to describe switch models featuring Energy
Efficient Ethernet. Use it to conditionally support such access in the
common code.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some switch models have a dedicated register for Switch MAC/WoF/WoL.
This register, when present, is used to indirectly set the switch MAC
address, instead of a direct write to 3 global registers.
Identify this feature and share a common mv88e6xxx_set_addr function.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add MV88E6XXX_FLAG_TEMP and MV88E6XXX_FLAG_TEMP_LIMIT flags to describe
switch models featuring a temperature access. Use them to centralize the
access to the temperature feature.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a MV88E6XXX_FLAG_EEPROM flag to describe switch models featuring an
EEPROM and distribute the EEPROM access routines to all models.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some switch has dedicated SMI PHY Command and Data registers, used to
indirectly access the PHYs, instead of direct access.
Identify these switch models and make mv88e6xxx_phy_{read,write} generic
enough to support every models.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a MV88E6XXX_FLAG_PPU flag to describe switch models with a PHY
Polling Unit. This allows to merge PPU specific PHY access code in the
share code.
Make the mv88e6xxx_ppu_disable and mv88e6xxx_phy_{read,write}_ppu
functions use unlocked register accesses in order to call them in
mv88e6xxx_phy_{read,write} in a locked context.
Since the PPU code is shared, also remove NET_DSA_MV88E6XXX_NEED_PPU.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a flags bitmap to the info structure in order to identify features
supported or not by the different switch models.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
they are open-coded in all users except iov_iter_advance(), and there
they wouldn't be a bad idea either - as it is, iov_iter_advance(i, 0)
ends up dereferencing potentially past the end of iovec array. It
doesn't do anything with the value it reads, and very unlikely to
trigger an oops on dereference, but it is not impossible.
Reported-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The tvp5150_write() function can fail so don't return 0 unconditionally
in tvp5150_s_register() but propagate what's returned by tvp5150_write().
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The tvp5150_write() function calls i2c_smbus_write_byte_data() that
can fail but does not propagate the error to the caller. Instead it
just prints a debug, so callers can't know if the operation failed.
So change the function to return the error code to the caller so it
knows that the write failed and also print an error instead of just
printing a debug information.
While being there remove the inline keyword from tvp5150_write() to
make it consistent with tvp5150_read() and also because it's called
in a lot of places, so making inline is in fact counter productive
since it makes the kernel image size to be much bigger (~16 KiB).
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hauppauge WinTV-dualHD is a USB 2.0 dual DVB-T/T2/C tuner with
following components:
USB bridge: Empia EM28274 (chip id is the same as EM28174)
Demodulator: 2x Silicon Labs Si2168-B40
Tuner: 2x Silicon Labs Si2157-A30
This patch adds support only for the first tuner.
The demodulator needs firmware, available for example here:
http://palosaari.fi/linux/v4l-dvb/firmware/Si2168/Si2168-B40/4.0.11/
The demodulators sit on the same I2C bus and their addresses
are 0x64 and 0x67. The tuners are behind the demodulators and
their addresses are 0x60 and 0x63.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fix the error message printed when attempting and failing to create the
call path root incorrectly references the call return process.
This change fixes the message to properly reference the failure to
create the call path root.
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1462612620-25008-2-git-send-email-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Scale values by unit before passing them to the metrics printing
functions. This is needed for TopDown, because it needs to scale the
slots correctly by pipeline width / SMTness.
For existing metrics it shouldn't make any difference, as those
generally use events that don't have any units.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1462489447-31832-8-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
NULL pointer derefence happens when booting with DTB because the
platform data for haptic device is not set in supplied data from parent
MFD device.
The MFD device creates only platform data (from Device Tree) for itself,
not for haptic child.
Unable to handle kernel NULL pointer dereference at virtual address 0000009c
pgd = c0004000
[0000009c] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
(max8997_haptic_probe) from [<c03f9cec>] (platform_drv_probe+0x4c/0xb0)
(platform_drv_probe) from [<c03f8440>] (driver_probe_device+0x214/0x2c0)
(driver_probe_device) from [<c03f8598>] (__driver_attach+0xac/0xb0)
(__driver_attach) from [<c03f67ac>] (bus_for_each_dev+0x68/0x9c)
(bus_for_each_dev) from [<c03f7a38>] (bus_add_driver+0x1a0/0x218)
(bus_add_driver) from [<c03f8db0>] (driver_register+0x78/0xf8)
(driver_register) from [<c0101774>] (do_one_initcall+0x90/0x1d8)
(do_one_initcall) from [<c0a00dbc>] (kernel_init_freeable+0x15c/0x1fc)
(kernel_init_freeable) from [<c06bb5b4>] (kernel_init+0x8/0x114)
(kernel_init) from [<c0107938>] (ret_from_fork+0x14/0x3c)
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: <stable@vger.kernel.org>
Fixes: 104594b01c ("Input: add driver support for MAX8997-haptic")
[k.kozlowski: Write commit message, add CC-stable]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
As pointed out by Richard, the changes to the comment got missed off
the absolute mode patch somehow.
Signed-off-by: Chris Diamand <chris@diamand.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Replace custom approach by %*ph specifier to dump small buffers in hex format.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
There is no need to check for DWARF unwinding support when using the
'dwarf' callchain record method, as this will only ask the kernel to
collect stack dumps for later DWARF CFI processing, which can be done in
another machine, where the support for DWARF unwinding need to be
present.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1462525154-125656-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
au0828_v4l2_device_register() unlocks au0828_dev->lock and frees au0828
dev in error legs before return. au0828_usb_probe() does the same when
au0828_v4l2_device_register() returns error.
Fix au0828_v4l2_device_register() to not to unlock and free in its error
legs.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Patch summary:
When showing a cgroupfs entry in mountinfo, show the path of the mount
root dentry relative to the reader's cgroup namespace root.
Short explanation (courtesy of mkerrisk):
If we create a new cgroup namespace, then we want both /proc/self/cgroup
and /proc/self/mountinfo to show cgroup paths that are correctly
virtualized with respect to the cgroup mount point. Previous to this
patch, /proc/self/cgroup shows the right info, but /proc/self/mountinfo
does not.
Long version:
When a uid 0 task which is in freezer cgroup /a/b, unshares a new cgroup
namespace, and then mounts a new instance of the freezer cgroup, the new
mount will be rooted at /a/b. The root dentry field of the mountinfo
entry will show '/a/b'.
cat > /tmp/do1 << EOF
mount -t cgroup -o freezer freezer /mnt
grep freezer /proc/self/mountinfo
EOF
unshare -Gm bash /tmp/do1
> 330 160 0:34 / /sys/fs/cgroup/freezer rw,nosuid,nodev,noexec,relatime - cgroup cgroup rw,freezer
> 355 133 0:34 /a/b /mnt rw,relatime - cgroup freezer rw,freezer
The task's freezer cgroup entry in /proc/self/cgroup will simply show
'/':
grep freezer /proc/self/cgroup
9:freezer:/
If instead the same task simply bind mounts the /a/b cgroup directory,
the resulting mountinfo entry will again show /a/b for the dentry root.
However in this case the task will find its own cgroup at /mnt/a/b,
not at /mnt:
mount --bind /sys/fs/cgroup/freezer/a/b /mnt
130 25 0:34 /a/b /mnt rw,nosuid,nodev,noexec,relatime shared:21 - cgroup cgroup rw,freezer
In other words, there is no way for the task to know, based on what is
in mountinfo, which cgroup directory is its own.
Example (by mkerrisk):
First, a little script to save some typing and verbiage:
echo -e "\t/proc/self/cgroup:\t$(cat /proc/self/cgroup | grep freezer)"
cat /proc/self/mountinfo | grep freezer |
awk '{print "\tmountinfo:\t\t" $4 "\t" $5}'
Create cgroup, place this shell into the cgroup, and look at the state
of the /proc files:
2653
2653 # Our shell
14254 # cat(1)
/proc/self/cgroup: 10:freezer:/a/b
mountinfo: / /sys/fs/cgroup/freezer
Create a shell in new cgroup and mount namespaces. The act of creating
a new cgroup namespace causes the process's current cgroups directories
to become its cgroup root directories. (Here, I'm using my own version
of the "unshare" utility, which takes the same options as the util-linux
version):
Look at the state of the /proc files:
/proc/self/cgroup: 10:freezer:/
mountinfo: / /sys/fs/cgroup/freezer
The third entry in /proc/self/cgroup (the pathname of the cgroup inside
the hierarchy) is correctly virtualized w.r.t. the cgroup namespace, which
is rooted at /a/b in the outer namespace.
However, the info in /proc/self/mountinfo is not for this cgroup
namespace, since we are seeing a duplicate of the mount from the
old mount namespace, and the info there does not correspond to the
new cgroup namespace. However, trying to create a new mount still
doesn't show us the right information in mountinfo:
# propagating to other mountns
/proc/self/cgroup: 7:freezer:/
mountinfo: /a/b /mnt/freezer
The act of creating a new cgroup namespace caused the process's
current freezer directory, "/a/b", to become its cgroup freezer root
directory. In other words, the pathname directory of the directory
within the newly mounted cgroup filesystem should be "/",
but mountinfo wrongly shows us "/a/b". The consequence of this is
that the process in the cgroup namespace cannot correctly construct
the pathname of its cgroup root directory from the information in
/proc/PID/mountinfo.
With this patch, the dentry root field in mountinfo is shown relative
to the reader's cgroup namespace. So the same steps as above:
/proc/self/cgroup: 10:freezer:/a/b
mountinfo: / /sys/fs/cgroup/freezer
/proc/self/cgroup: 10:freezer:/
mountinfo: /../.. /sys/fs/cgroup/freezer
/proc/self/cgroup: 10:freezer:/
mountinfo: / /mnt/freezer
cgroup.clone_children freezer.parent_freezing freezer.state tasks
cgroup.procs freezer.self_freezing notify_on_release
3164
2653 # First shell that placed in this cgroup
3164 # Shell started by 'unshare'
14197 # cat(1)
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Tested-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
c8sectpfe driver relied on CONFIG_FW_LOADER_USER_HELPER_FALLBACK option
for loading its xp70 firmware. A previous commit removed this Kconfig
option, as it is apparently harmful, but did not update the driver
code which relied on it.
This patch reworks the firmware loading into the start_feed callback.
At this point we can be sure the rootfs is present, thereby removing
the depedency on CONFIG_FW_LOADER_USER_HELPER_FALLBACK.
Fixes: 79f5b6ae96 ('[media] c8sectpfe: Remove select on CONFIG_FW_LOADER_USER_HELPER_FALLBACK')
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
During the review process, a regression was intoduced in the
circular buffer write pointer management. This means that wp
doesn't get managed properly once the buffer becomes full.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Lots of Idiotic Silly Parentheses is -> that way... What that
condition checks is that there's exactly 32 bytes between the
end of name and the end of entire drectory record.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Note that lustre has its private mutex protecting directory pagecache;
if they ever remove it, they'll need to be careful with PageChecked()
use.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
use d_alloc_parallel() for sillyunlink/lookup exclusion and
explicit rwsem (nfs_rmdir() being a writer and nfs_call_unlink() -
a reader) for rmdir/sillyunlink one.
That ought to make lookup/readdir/!O_CREAT atomic_open really
parallel on NFS.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXL7HfAAoJEHm+PkMAQRiGYe8IAJBGaPUq38EJh2YOV+AQf9v6
t/alhwB3DUE1E0zjLy7I7JJ+xDXtKjZh9fS6OFuIS8Q3RIrBteIJ/oH8TPpt7yZ/
SnP6rYPvYD6CImTyrh7+ORL/udEwJX8+YqFYAgUAq167gvpDjYj8r26VzdIaIN4/
oBbL8NrQNWfODieywYyhUoitVhwMz09zmBfLtGVks4vd2jUJk2Fdd9cOtGV5tRfk
DPndPgyQtbr8W0mKovV8sT9WkQeV5TsUr4MLgf7hjnAGYQ8+0KamkzzVVLBeBiiw
uazyrOCFkddZp+N7KbmbOmazV/yULRuLGgDjVKazoCsOaKOvoGCzrCk7daOPy6Q=
=CegX
-----END PGP SIGNATURE-----
Merge tag 'v4.6-rc7' into patchwork
Linux 4.6-rc7
* tag 'v4.6-rc7': (185 commits)
Linux 4.6-rc7
parisc: fix a bug when syscall number of tracee is __NR_Linux_syscalls
x86/tsc: Read all ratio bits from MSR_PLATFORM_INFO
mailmap: add John Paul Adrian Glaubitz
byteswap: try to avoid __builtin_constant_p gcc bug
lib/stackdepot: avoid to return 0 handle
mm: fix kcompactd hang during memory offlining
modpost: fix module autoloading for OF devices with generic compatible property
proc: prevent accessing /proc/<PID>/environ until it's ready
mm/zswap: provide unique zpool name
mm: thp: kvm: fix memory corruption in KVM with THP enabled
MAINTAINERS: fix Rajendra Nayak's address
mm, cma: prevent nr_isolated_* counters from going negative
mm: update min_free_kbytes from khugepaged after core initialization
huge pagecache: mmap_sem is unlocked when truncation splits pmd
rapidio/mport_cdev: fix uapi type definitions
mm: memcontrol: let v2 cgroups follow changes in system swappiness
mm: thp: correct split_huge_pages file permission
maintainers: update rmk's email address(es)
writeback: Fix performance regression in wb_over_bg_thresh()
...
An earlier patch changed lookup side to also net_eq() namespaces after
obtaining a reference on the conntrack, so a single kmemcache can be used.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We already include netns address in the hash, so we only need to use
net_eq in find_appropriate_src and can then put all entries into
same table.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Will be needed soon when we place all in the same hash table.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
