Introduce "altr,socfpga-dw-mshc" to enable Altera's SOCFPGA platform
specific implementation of the dw_mmc driver.
Also add the "syscon" binding to the "altr,sys-mgr" node. The clock
driver can use the syscon driver to toggle the register for the SD/MMC
clock phase shift settings.
Finally, fix an indentation error for the sysmgr node.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Chris Ball <chris@printf.net>
This patch adds support for the new v2 version of the axi-clkgen core.
Unfortunately the method of accessing the registers is quite different on v2,
while the content still stays largely the same. So the patch adds a small
abstraction layer which implements the specific read and write functions for v1
and v2 in callback functions.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Suggest by Arnd: abstract mmc tuning as clock behavior,
also because different soc have different tuning method and registers.
hi3620_mmc_clks is added to handle mmc clock specifically on hi3620.
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
While we are here, also brush up the devicetree binding documentation.
The example was an inappropriate copy from the sh_mobile driver.
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Add support for the led-mode property for the following PHYs
which have a single LED mode configuration value.
KSZ8001 and KSZ8041 which both use register 0x1e bits 15,14 and
KSZ8021, KSZ8031 and KSZ8051 which use register 0x1f bits 5,4
to control the LED configuration.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch replaces magic numbers with macros defined in DT header
in exynos5440 clock bindings.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
The patch replaces magic numbers with macros defined in DT header
in exynos5420 clock bindings.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
The patch replaces magic numbers with macros defined in DT header
in exynos5250 clock bindings.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
The patch replaces magic numbers with macros defined in DT header
in exynos4 clock bindings.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Dove pinctrl binding now requires three different reg properties. This
updates corresponding binding and example accordingly. While at it, also
document reg property as required for the other MVEBU SoC pinctrl nodes.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Marvell Dove SoC binding was not documented, yet. Add the documentation
and also describe Global Configuration register node in it.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
The Marvell Armada 380/385 are new ARM SoCs from Marvell, part of the
mvebu family, but using a Cortex-A9 CPU core. In terms of pin-muxing,
it is similar to Armada 370 and XP for the register layout, only
different in the number of available pins and their
functions. Therefore, we simply use the existing
drivers/pinctrl/mvebu/ infrastructure, with no other changes that the
list of pins and corresponding functions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
The Marvell Armada 375 is a new ARM SoC from Marvell, part of the
mvebu family, but using a Cortex-A9 CPU core. In terms of pin-muxing,
it is similar to Armada 370 and XP for the register layout, only
different in the number of available pins and their
functions. Therefore, we simply use the existing
drivers/pinctrl/mvebu/ infrastructure, with no other changes that the
list of pins and corresponding functions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
- mvebu
- initial support for Armada 375, 380, and 385
Depends:
- tags/mvebu-soc-3.15 (resolves delete/rename hidden conflict)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=LIE3
-----END PGP SIGNATURE-----
Merge tag 'mvebu-soc-3xx-3.15' of git://git.infradead.org/linux-mvebu into next/soc
Merge "mvebu new SoCs for v3.15" from Jason Cooper:
- mvebu
- initial support for Armada 375, 380, and 385
Depends:
- tags/mvebu-soc-3.15 (resolves delete/rename hidden conflict)
* tag 'mvebu-soc-3xx-3.15' of git://git.infradead.org/linux-mvebu:
Documentation: arm: update Marvell documentation about Armada 375/38x
ARM: mvebu: add initial support for the Armada 380/385 SOCs
ARM: mvebu: add workaround for data abort issue on Armada 375
ARM: mvebu: add initial support for the Armada 375 SOCs
ARM: mvebu: add Armada 375 support to the system-controller driver
ARM: mvebu: make CPU_PJ4B selection a per-SoC choice
ARM: mvebu: rename DT machine structure for Armada 370/XP
ARM: mvebu: rename armada-370-xp.c to board-v7.c
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- orion watchdog
- cleanup and extend driver to support Armada 370 and Armada XP
Depends:
- tags/irqchip-mvebu-fixes-3.14 (already pulled by tglx)
- both are based on v3.14-rc1
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=3VWF
-----END PGP SIGNATURE-----
Merge tag 'mvebu-watchdog-3.15' of git://git.infradead.org/linux-mvebu into next/drivers
mvebu watchdog driver changes for v3.15
- orion watchdog
- cleanup and extend driver to support Armada 370 and Armada XP
Depends:
- tags/irqchip-mvebu-fixes-3.14 (already pulled by tglx)
- both are based on v3.14-rc1
* tag 'mvebu-watchdog-3.15' of git://git.infradead.org/linux-mvebu:
watchdog: orion: Enable the build on ARCH_MVEBU
watchdog: orion: Add support for Armada 370 and Armada XP SoC
watchdog: orion: Add per-compatible watchdog start implementation
watchdog: orion: Add per-compatible clock initialization
watchdog: orion: Introduce per-compatible of_device_id data
watchdog: orion: Introduce an orion_watchdog device structure
watchdog: orion: Remove unneeded BRIDGE_CAUSE clear
watchdog: orion: Make RSTOUT register a separate resource
watchdog: orion: Handle the interrupt so it's properly acked
watchdog: orion: Make sure the watchdog is initially stopped
watchdog: orion: Remove unused macros
watchdog: orion: Use atomic access for shared registers
watchdog: orion: Add clock error handling
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The compatible string of the Broadcom Capri pinctrl driver is renamed to
"brcm,bcm11351-pinctrl" to match the machine binding here:
Documentation/devicetree/bindings/arm/bcm/bcm11351.txt
Signed-off-by: Sherman Yin <syin@broadcom.com>
Reviewed-by: Matt Porter <mporter@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Christian Daudt <bcm@fixthebug.org>
This patch makes it possible to set the chipidea udc into full-speed only mode.
It is set by the oftree property "maximum-speed = full-speed".
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds descriptions for new properties of the device tree
binding for the ARM SMMU architecture. These properties control
arm-smmu driver options.
Cc: Grant Likely <grant.likely@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
[will: removed device isolation property, as this has been dropped and
fixed up spacing in documentation]
Signed-off-by: Will Deacon <will.deacon@arm.com>
The DT bindings document a renesas,indices property, while the code, the
DT example and the DT sources all use renesas,clock-indices. Fix the
documentation.
The shmobile mstp DT bindings have been merged in v3.14-rc1 with a bug
in the DT ABI, a fix during the -rc series is appropriate.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms@verge.net.au>
ARCH_MULTIPLATFORM. (For multi-platform code it's already unused since
387798b (ARM: initial multiplatform support).)
To make this work some code out of arch/arm needed to be adapted. The
respective changes got acks by their maintainers to be taken via armsoc
(with Andrew Morton substituting for Alessandro Zummo as rtc maintainer).
Compared to the previous pull request there was another patch added that
fixes a (non-critical) regression on ixp4xx. Olof Johansson asked to not
squash this fix into the original commit to save him from the need to
reverify the series.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=g6PN
-----END PGP SIGNATURE-----
Merge tag 'dropmachtimexh-v2' of git://git.pengutronix.de/git/ukl/linux
This cleanup series gets rid of <mach/timex.h> for platforms not using
ARCH_MULTIPLATFORM. (For multi-platform code it's already unused since
387798b (ARM: initial multiplatform support).)
To make this work some code out of arch/arm needed to be adapted. The
respective changes got acks by their maintainers to be taken via armsoc
(with Andrew Morton substituting for Alessandro Zummo as rtc maintainer).
Compared to the previous pull request there was another patch added that
fixes a (non-critical) regression on ixp4xx. Olof Johansson asked to not
squash this fix into the original commit to save him from the need to
reverify the series.
Conflicts:
arch/arm/mach-at91/at91sam9260.c
arch/arm/mach-at91/at91sam9261.c
arch/arm/mach-at91/at91sam9263.c
arch/arm/mach-at91/at91sam9rl.c
arch/arm/mach-mmp/time.c
arch/arm/mach-sa1100/time.c
A collection of fixes for ARM platforms. Most are fixes for DTS files,
mostly from DT conversion on OMAP which is still finding a few issues here
and there.
There's a couple of small stale code removal patches that we usually
queue for the next release instead, but they seemed harmless enough to
bring in now.
Also, a fix for backlight on some PXA platforms, and a cache configuration
fix for Tegra, etc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQIcBAABAgAGBQJTCgAlAAoJEIwa5zzehBx3J8MP/jFJWHtLHSeSXeKTLEeBV18J
/M7OG5hKyI38mImPbdJmCHpcTfExTqWuIkvN+6e7QN5PU1V3YSy5XELPh9UIn7zU
u+Pmt1C4cG8GFEdf03LqaDc4vdtthKUHGUBxQjrA3ZFrR8XZlzAZrnLKU/HA1VF5
ynaj1cs4Vpf2CGXjM+2ATr5gVhjTs1yldTkG+lHL99JAlSJe7TD3mrANXBRXVVNC
2yHGEDpDJf8kkBRQZ91xGcVVFw2YWF1avUi3QQ5WltufI+Rtdu8g7ibhakK/nimU
AfZ3LidjjiTFIGfEi5/2FBim6Tsxpd6wLlchzA6ksPaQ6hk0EVzRPPNzlarmeRO8
IF5zUPGPXswBeQURXe+OcZIUI4PGS02tshlIUWFPaFM3mZY2djd8Df8Rg20isjOu
vUYGSL2UY0uLb8NS97scNS9ouGYDp8lV9pHIYlmf6f3Opv6vsw56rWggSsDQDAOk
wbA2COTtDXxo1tEgbrmevDiaCc8uCDTHKD+uwbxOMCTwLvHHsafRp85BgcCz1z0L
bOvTbqVhBPW6T47D1ED+ECBo12DbZwA8pth0JSRaf/Fbp6+aMFXp0/d7Hw+ggAxN
wgEFq/A0M6v+5Y9azo+GLkgqPdH+7twH6eqD8TRgcQdnZXWIuq9UtaNw9Qx4Uusr
fX9CS2l8ISXgopnRPZCI
=i7LS
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A collection of fixes for ARM platforms. Most are fixes for DTS
files, mostly from DT conversion on OMAP which is still finding a few
issues here and there.
There's a couple of small stale code removal patches that we usually
queue for the next release instead, but they seemed harmless enough to
bring in now.
Also, a fix for backlight on some PXA platforms, and a cache
configuration fix for Tegra, etc"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits)
MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer
ARM: tegra: only run PL310 init on systems with one
ARM: tegra: Add head numbers to display controllers
ARM: imx6: build pm-imx6q.c independently of CONFIG_PM
ARM: tegra: fix RTC0 alias for Cardhu
ARM: dove: dt: revert PMU interrupt controller node
Documentation: dt: OMAP: Update Overo/Tobi
ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi
ARM: dts: omap3-tobi: Use the correct vendor prefix
ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo
ARM: OMAP2+: Remove legacy macros for zoom platforms
ARM: OMAP2+: Remove MACH_NOKIA_N800
ARM: dts: N900: add missing compatible property
ARM: dts: N9/N950: fix boot hang with 3.14-rc1
ARM: OMAP1: nokia770: enable tahvo-usb
ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND is built as module
ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is built as module
ARM: dts: omap3-gta04: Fix mmc1 properties.
ARM: dts: omap3-gta04: Fix 'aux' gpio key flags.
ARM: OMAP2+: add missing ARCH_HAS_OPP
...
- mvebu (Armada 375/380/385)
- extend corediv clock driver to support new SoCs
- add core and gating clock drivers for new SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=Aah7
-----END PGP SIGNATURE-----
Merge tag 'clk-mvebu-3xx-3.15' of git://git.infradead.org/linux-mvebu into clk-next-mvebu
clock: mvebu new SoC changes for v3.15
- mvebu (Armada 375/380/385)
- extend corediv clock driver to support new SoCs
- add core and gating clock drivers for new SoCs
Add a property called clock-indices to allow clock-output-names
to be used where the index used to lookup a clock is not a 1:1
mapping to the array position in the clock-output-names
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
There are a few fixes in here that might, earlier in a cycle, have gone
to Greg as fixes. Given they are either minor or have never actually
been observed as causing trouble (the locking bug in the event code) and
are invasive, I have included them in this pull request, targeting the
3.15 merge window instead.
The rest are pretty uncontroversial new drivers, a handy little tool for
the example code in our documentation and little cleanups.
New drivers
* Freescale Vybrid and i.MX6SLX ADC driver.
* HID Sensor hub proximity sensors.
* HID Sensor hub pressure sensors.
* LPS25H Pressure sensors added to the ST micro pressure sensor driver.
New functionality
* lsiio tool. This is added to the staging tree as we haven't yet moved
the example code it sits with out. Moving this code out is now a reasonably
high priority but holding up this tool in the meantime did not seem
worthwhile.
* mag3110 - add missing scale factor for temperature output to userspace.
Cleanups
* Fix a bug in the event reporting in which a spin lock might be held over
when a sleep occured. A similar bug was found by Lars in the buffer code.
It has not to our knowledge been observed as actually occuring and is
a little too invasive to push out as a fix.
* Drop the IIO_ST macro after clearing out all users. This macro was a very
bad idea leading to a number of bugs after it stopped covering all elements
of the structure being assigned and people started making assumptions about
what it did cover. Glad to see it go!
* Avoid applying extended name to shared attributes as it makes no sense.
No in tree drivers were using the combination, hence not pushed out as
a fix.
* ad799x - move to devm_request_threaded_irq to reduce boilerplate clean up.
* bma180 - make the low_pass_filter_3db_frequency info element shared rather
than per attribute. The old approach was valid but not as clean as it might
be and was setting a bad example. Hence the cleanup.
* mxs-lradc - propogate the error code form a platform_get_irq call rather than
eating it up by returning -EINVAL on all errors.
* ad799x - typo fix in the copyright message. Either that or Michael was
asserting a copyright that moved backwards in time by about a thousand years.
* ad799x - use a regulator for vref rather than platform data. The driver
dates from just as the regulator framework was coming into common use so
provides an alternative way of specifying the reference voltage. We no
longer need that approach so drop it in favour of a regulator only approach.
* max1363 - some internal vref values were out by a small amount. The effect
would have been tiny and no one noticed hence not pushing this through as
a fix.
* core - replace some pointless goto error_ret (with no clean up) lines with
direct returns. This is my bad coding style so I'm glad to see it cleaned
up.
* core - avoid a kasprintf that just directly prints a string with no
formatting elements. This has always been there but Lars just noticed it.
Oops.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=Dg3R
-----END PGP SIGNATURE-----
Merge tag 'iio-for-3.15b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second round of IIO new driver, functionality and cleanups for the 3.15 series.
There are a few fixes in here that might, earlier in a cycle, have gone
to Greg as fixes. Given they are either minor or have never actually
been observed as causing trouble (the locking bug in the event code) and
are invasive, I have included them in this pull request, targeting the
3.15 merge window instead.
The rest are pretty uncontroversial new drivers, a handy little tool for
the example code in our documentation and little cleanups.
New drivers
* Freescale Vybrid and i.MX6SLX ADC driver.
* HID Sensor hub proximity sensors.
* HID Sensor hub pressure sensors.
* LPS25H Pressure sensors added to the ST micro pressure sensor driver.
New functionality
* lsiio tool. This is added to the staging tree as we haven't yet moved
the example code it sits with out. Moving this code out is now a reasonably
high priority but holding up this tool in the meantime did not seem
worthwhile.
* mag3110 - add missing scale factor for temperature output to userspace.
Cleanups
* Fix a bug in the event reporting in which a spin lock might be held over
when a sleep occured. A similar bug was found by Lars in the buffer code.
It has not to our knowledge been observed as actually occuring and is
a little too invasive to push out as a fix.
* Drop the IIO_ST macro after clearing out all users. This macro was a very
bad idea leading to a number of bugs after it stopped covering all elements
of the structure being assigned and people started making assumptions about
what it did cover. Glad to see it go!
* Avoid applying extended name to shared attributes as it makes no sense.
No in tree drivers were using the combination, hence not pushed out as
a fix.
* ad799x - move to devm_request_threaded_irq to reduce boilerplate clean up.
* bma180 - make the low_pass_filter_3db_frequency info element shared rather
than per attribute. The old approach was valid but not as clean as it might
be and was setting a bad example. Hence the cleanup.
* mxs-lradc - propogate the error code form a platform_get_irq call rather than
eating it up by returning -EINVAL on all errors.
* ad799x - typo fix in the copyright message. Either that or Michael was
asserting a copyright that moved backwards in time by about a thousand years.
* ad799x - use a regulator for vref rather than platform data. The driver
dates from just as the regulator framework was coming into common use so
provides an alternative way of specifying the reference voltage. We no
longer need that approach so drop it in favour of a regulator only approach.
* max1363 - some internal vref values were out by a small amount. The effect
would have been tiny and no one noticed hence not pushing this through as
a fix.
* core - replace some pointless goto error_ret (with no clean up) lines with
direct returns. This is my bad coding style so I'm glad to see it cleaned
up.
* core - avoid a kasprintf that just directly prints a string with no
formatting elements. This has always been there but Lars just noticed it.
Oops.
For some CPU/CODEC DAI devices the slot information maybe needed. This
patch adds the slot information parsing for simple-card driver.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Support regulators to power up the codec. This patch also enables the
AVDD LDO if no AV regulator was found.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Add support for a master clock passed through DT. The master clock of
the codec is only active when the codec is in use.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
List full example compatible properties with soctypes instead of just the
soctypes, so checkpatch can validate DTSes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
The older Allwinner SoCs (A10, A13, A10s and A20) all have the same SPI
controller.
Unfortunately, this SPI controller, even though quite similar, is significantly
different from the recently supported A31 SPI controller (different registers
offset, split/merged registers, etc.). Supporting both controllers in a single
driver would be unreasonable, hence the addition of a new driver.
Like its more recent counterpart, it supports DMA, but the driver only does PIO
until we have a dmaengine driver for this platform.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Instantiate the L2 cache from DT. Indicate in DT where the cache
control register is so that it is possible to enable/disable write
through on the CPU.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The ahci_platform driver supports "snps,dwc-ahci".
Add this to the DT binding information.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This avoids the ugliness of creating a nested platform device from probe.
While moving it around anyways, move the mk6q phy init code from probe
to imx_sata_enable, as the phy needs to be re-initialized on resume too,
otherwise the drive won't be recognized after resume.
Tested on a wandboard i.mx6 quad.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch adds support for the ahci sata controler found on Allwinner A10
and A20 SoCs to the ahci_platform driver.
Orignally written by Olliver Schinagl using the approach of having a platform
device which probe method creates a new child platform device which gets
driven by ahci_platform.c, as done by ahci_imx.c .
Refactored by Hans de Goede to add most of the non sunxi specific functionality
to ahci_platform.c and use a platform_data pointer from of_device_id for the
sunxi specific bits.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The allwinner-sun4i AHCI controller needs 2 clocks to be enabled and the
imx AHCI controller needs 3 clocks to be enabled.
tj: Minor comment formatting updates.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Provide the option to configure these speed modes per host, for those
host driver's that can't distinguish this in runtime.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
Provide the option to configure these speed modes per host, for those
host driver's that can't distinguish this in runtime.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <chris@printf.net>
Provide the option to configure these speed modes per host, for those
host driver's that can't distinguish this in runtime.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <chris@printf.net>
The new Armada 375 and Armada 38x Marvell SoCs are based on Cortex-A9
CPU cores and use the ARM GIC as their main interrupt controller.
However, for various purposes (wake-up from suspend, MSI interrupts),
they have kept a separate MPIC interrupt controller, acting as a slave
to the GIC. This MPIC was already used as the primary controller on
previous Marvell SoCs, so this commit extends the existing driver to
allow the MPIC to be used as a GIC slave.
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Using the added infrastructure for handling SoC differences,
this commit adds support for the watchdog controller available
in Armada 370 and Armada XP SoCs.
Also, and because the AXP clock initialization uses of_clk_get_by_name,
this commit changes the orion clock initialization to use clk_get() and
adds a proper clk_put() on the common exit/error paths.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Tested-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
