Pull irq code updates from Thomas Gleixner:
"The irq department proudly presents:
- Another tree wide sweep of irq infrastructure abuse. Clear winner
of the trainwreck engineering contest was:
#include "../../../kernel/irq/settings.h"
- Tree wide update of irq_set_affinity() callbacks which miss a cpu
online check when picking a single cpu out of the affinity mask.
- Tree wide consolidation of interrupt statistics.
- Updates to the threaded interrupt infrastructure to allow explicit
wakeup of the interrupt thread and a variant of synchronize_irq()
which synchronizes only the hard interrupt handler. Both are
needed to replace the homebrewn thread handling in the mmc/sdhci
code.
- New irq chip callbacks to allow proper support for GPIO based irqs.
The GPIO based interrupts need to request/release GPIO resources
from request/free_irq.
- A few new ARM interrupt chips. No revolutionary new hardware, just
differently wreckaged variations of the scheme.
- Small improvments, cleanups and updates all over the place"
I was hoping that that trainwreck engineering contest was a April Fools'
joke. But no.
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (68 commits)
irqchip: sun7i/sun6i: Disable NMI before registering the handler
ARM: sun7i/sun6i: dts: Fix IRQ number for sun6i NMI controller
ARM: sun7i/sun6i: irqchip: Update the documentation
ARM: sun7i/sun6i: dts: Add NMI irqchip support
ARM: sun7i/sun6i: irqchip: Add irqchip driver for NMI controller
genirq: Export symbol no_action()
arm: omap: Fix typo in ams-delta-fiq.c
m68k: atari: Fix the last kernel_stat.h fallout
irqchip: sun4i: Simplify sun4i_irq_ack
irqchip: sun4i: Use handle_fasteoi_irq for all interrupts
genirq: procfs: Make smp_affinity values go+r
softirq: Add linux/irq.h to make it compile again
m68k: amiga: Add linux/irq.h to make it compile again
irqchip: sun4i: Don't ack IRQs > 0, fix acking of IRQ 0
irqchip: sun4i: Fix a comment about mask register initialization
irqchip: sun4i: Fix irq 0 not working
genirq: Add a new IRQCHIP_EOI_THREADED flag
genirq: Document IRQCHIP_ONESHOT_SAFE flag
ARM: sunxi: dt: Convert to the new irq controller compatibles
irqchip: sunxi: Change compatibles
...
Pull timer changes from Thomas Gleixner:
"This assorted collection provides:
- A new timer based timer broadcast feature for systems which do not
provide a global accessible timer device. That allows those
systems to put CPUs into deep idle states where the per cpu timer
device stops.
- A few NOHZ_FULL related improvements to the timer wheel
- The usual updates to timer devices found in ARM SoCs
- Small improvements and updates all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
tick: Remove code duplication in tick_handle_periodic()
tick: Fix spelling mistake in tick_handle_periodic()
x86: hpet: Use proper destructor for delayed work
workqueue: Provide destroy_delayed_work_on_stack()
clocksource: CMT, MTU2, TMU and STI should depend on GENERIC_CLOCKEVENTS
timer: Remove code redundancy while calling get_nohz_timer_target()
hrtimer: Rearrange comments in the order struct members are declared
timer: Use variable head instead of &work_list in __run_timers()
clocksource: exynos_mct: silence a static checker warning
arm: zynq: Add support for cpufreq
arm: zynq: Don't use arm_global_timer with cpufreq
clocksource/cadence_ttc: Overhaul clocksource frequency adjustment
clocksource/cadence_ttc: Call clockevents_update_freq() with IRQs enabled
clocksource: Add Kconfig entries for CMT, MTU2, TMU and STI
sh: Remove Kconfig entries for TMU, CMT and MTU2
ARM: shmobile: Remove CMT, TMU and STI Kconfig entries
clocksource: armada-370-xp: Use atomic access for shared registers
clocksource: orion: Use atomic access for shared registers
clocksource: timer-keystone: Delete unnecessary variable
clocksource: timer-keystone: introduce clocksource driver for Keystone
...
Pull libata updates from Tejun Heo:
"A lot of activities on libata side this time.
- A lot of changes around ahci. Various embedded platforms are
implementing ahci controllers. Some were built atop ahci_platform,
others were doing their own things. Hans made some structural
changes to libahci and librarized ahci_platform so that ahci
platform drivers can share more common code. A couple platform
drivers are added on top of that and several are added to replace
older drivers which were doing their own things (older ones are
scheduled to be removed).
- Dan finishes the patchset to make libata PM operations
asynchronous. Combined with one patch being routed through scsi,
this should speed resume measurably.
- Various fixes and cleanups from Bartlomiej and others"
* 'for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (61 commits)
ata: fix Marvell SATA driver dependencies
ata: fix ARASAN CompactFlash PATA driver dependencies
ata: remove superfluous casts
ata: sata_highbank: remove superfluous cast
ata: fix Calxeda Highbank SATA driver dependencies
ata: fix R-Car SATA driver dependencies
ARM: davinci: da850: update SATA AHCI support
ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller
ata: move library code from ahci_platform.c to libahci_platform.c
ata: ahci_platform: fix ahci_platform_data->suspend method handling
libata: remove unused ata_sas_port_async_resume() stub
libata.h: add stub for ata_sas_port_resume
libata: async resume
libata, libsas: kill pm_result and related cleanup
ata: Fix compiler warning with APM X-Gene host controller driver
arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entries
ata: Add APM X-Gene SoC AHCI SATA host controller driver
Documentation: Add documentation for the APM X-Gene SoC SATA host controller DTS binding
arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries
ata: ahci_sunxi: fix code formatting
...
This patch does not alter the binding at all it only brings the
documentation up to date with the existing binding.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The PM8xxx family of PMICs contain an RTC. This RTC is described as a
subnode of the PM8xxx. Document these bindings, and replace the pwrkey
node in the example with the RTC, which is now described in this
document.
While we're here, add a short description to the device tree bindings
describing what the the PM8xxx devices are and how they are expected to
be used.
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The Allwinner A10 and A31 compatibles were following a slightly different
compatible patterns than the rest of the SoCs for historical reasons. Change
the compatibles to match the other pattern in the watchdog controller driver
for consistency.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTOOOnAAoJEHm+PkMAQRiGsBAH/2PAOL3TbOG6tEedxQrTwsr2
muRIRTVWawjT8/npbHupxGnAyAVdmdffBHpmCmcftKdKNryT3YZW8/JWoYc+WSlo
3vTDJHDOYAe6yCBjjhYwcu150THBQdOymOi5mbbclo0XWYG18jd3+abYprRH6SiD
XqNSzYqoiv91JHBAWKBIpo1cyRDuwoM7+jZ7gX41r2800EL7loY3e08cPDDNU6HA
CKaLXMwLwYTefE+Wnr+4UUr08NbNBbBUKLUSXVqKKIpd+MtbyhV1SnWzz8VQSkag
K/uzsnGnE7nrqoepMSx3nXxzOWxUSY2EMbwhEjaKK4xBq9C9pzv3sG/o2/IyopU=
=Nuom
-----END PGP SIGNATURE-----
Merge tag 'v3.14' into drm-intel-next-queued
Linux 3.14
The vt-d w/a merged late in 3.14-rc needs a bit of fine-tuning, hence
backmerge.
Conflicts:
drivers/gpu/drm/i915/i915_gem_gtt.c
drivers/gpu/drm/i915/intel_ddi.c
drivers/gpu/drm/i915/intel_dp.c
All trivial adjacent lines changed type conflicts, so trivial git
doesn't even show them in the merg commit.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The driver is only supported on DT enabled platforms. Convert the
driver to DT so that it can probe properly.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver is only supported on DT enabled platforms. Convert the
driver to DT so that it can probe properly.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver is only supported on DT enabled platforms. Convert the
driver to DT so that it can probe properly.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This patch adds a new driver for keypad for Cirrus Logic CLPS711X CPUs.
Target CPU contain keyboard interface which can scan 8 column lines,
so we can read row GPIOs to read status and determine asserted state.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The SDHCI unit used on the Armada 380 and 385 Marvell SoC is similar
to the PXAv3 unit. The only difference is that on Armada 38x, the
PXAv3 unit accesses memory through MBus windows which must be
configured prior to using the device. Without this, DMA would not
work.
In order to achieve this, the sdhci-pxav3 driver is extended with an
additional compatible string "marvell,armada-380-sdhci". When this
compatible string is used, the MBus windows are initialized in a way
that is identical to what all other DMA-capable drivers for Marvell
EBU platforms do.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Chris Ball <chris@printf.net>
move to support of_dma_request_slave_channel() and dma_request_slave_channel.
we add a xlate() to let dma clients be able to find right dma_chan by generic
"dmas" properties in dts.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Add device tree binding support for the QCOM BAM DMA driver.
Acked-by: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Commit ba0d7ed391 "ARM: dts: enable ahci sata and sata phy for
exynos5250" added a new binding document for the sata phy device,
and changed the sata controller binding. However, in both cases
significant aspects of the binding remained undocumented.
This attempts to reconstruct the actual binding from the usage.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
- add DT entry for AHCI SATA and SATA PHY with using generic
PHY framework for exynos5250 and arndale, smdk5250 boards.
- add SSS DT node for exynos5420 and exynos5250
- remove leftover spi0 node for smdk5250 board
- add ADC and thermistor nodes for exynos4412-trats2 board
- move common irq-combiner node for exynos4x12 from exynos4212
and exynos4412
- add ADC, PMU and GPS_ALIVE power domain nodes for exynos4x12
Note that based on previous tags/samsung-dt and tags/exynos-clk
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=kibn
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup3
Merge "Samsung 2nd DT updates for v3.15" from Kukjin Kim:
- add DT entry for AHCI SATA and SATA PHY with using generic
PHY framework for exynos5250 and arndale, smdk5250 boards.
- add SSS DT node for exynos5420 and exynos5250
- remove leftover spi0 node for smdk5250 board
- add ADC and thermistor nodes for exynos4412-trats2 board
- move common irq-combiner node for exynos4x12 from exynos4212
and exynos4412
- add ADC, PMU and GPS_ALIVE power domain nodes for exynos4x12
Note that based on previous tags/samsung-dt and tags/exynos-clk
* tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: enable ahci sata and sata phy for exynos5250
ARM: dts: add dt node for sss module for exynos5250/5420
ARM: dts: Remove leftover spi0 node for smdk5250
ARM: dts: Add ADC and themistor nodes for exynos4412-trats2
ARM: dts: Move common dt data for interrupt combiner controller for exynos4x12
ARM: dts: Add GPS_ALIVE power domain for exynos4x12
ARM: dts: Add PMU dt data to support PMU for exynos4x12
ARM: dts: Add ADC's dt data to read raw data for exynos4x12
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the clocks and clock-names property to the base stmmac dts bindings
document.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch adds the dts bindings documenation for the Altera SOCFPGA glue
layer for the Synopsys STMMAC ethernet driver.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Qualcomm Universal Peripherial (QUP) wraps I2C mini-core and
provide input and output FIFO's for it. I2C controller can operate
as master with supported bus speeds of 100Kbps and 400Kbps.
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
[bjorn: reformulated part of binding description
added version to compatible
cleaned up example]
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Acked-by: Rob Herring <robh@kernel.org>
[wsa: removed the dummy child node which was a confusing example]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This was tested on a EFM32GG-DK3750 devboard that has a temperature
sensor and an eeprom on its i2c bus.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This patch adds the device-tree binding documentation for Qualcomm
SDHCI driver. It contains the differences between the core properties
in mmc.txt and the properties used by the sdhci-msm driver.
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
Merge "arm: Xilinx Zynq cleanup patches for v3.15" from Michal Simek:
- Redesign SLCR initialization to enable
driver developing which targets SLCR space
* tag 'zynq-cleanup-for-3.15-v2' of git://git.xilinx.com/linux-xlnx:
ARM: zynq: Add waituart implementation
ARM: zynq: Move of_clk_init from clock driver
ARM: zynq: Introduce zynq_slcr_unlock()
ARM: zynq: Add and use zynq_slcr_read/write() helper functions
ARM: zynq: Make zynq_slcr_base static
ARM: zynq: Map I/O memory on clkc init
ARM: zynq: Hang iomapped slcr address on device_node
ARM: zynq: Split slcr in two parts
ARM: zynq: Move clock_init from slcr to common
arm: dt: zynq: Add fclk-enable property to clkc node
[Arnd: remove SOC_BUS support from pull request]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Few fixes found during NAND ubifs testing
- Fix to build all dtbs together with dtbs
- Last patch is follow up comment from previous pull request
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=YLgs
-----END PGP SIGNATURE-----
Merge tag 'keystone-dts-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt
Merge "Keystone DTS fixes for 3.15" from Santosh Shilimkar:
- Few fixes found during NAND ubifs testing
- Fix to build all dtbs together with dtbs
- Last patch is follow up comment from previous pull request
* tag 'keystone-dts-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND
ARM: dts: Build all keystone dt blobs
ARM: dts: keystone: Fix control register range for clktsip
ARM: dts: keystone: Fix domain register range for clkfftc1
Conflicts:
arch/arm/boot/dts/Makefile
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This reverts commit 7e0b4cd062.
The binding changes need to be done differently as well, let's
take them through netdev, and merge the dts changes in a new
patch here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch adds binding document for SXGBE ethernet driver via device-tree.
Signed-off-by: Siva Reddy Kallam <siva.kallam@samsung.com>
Signed-off-by: Byungho An <bh74.an@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The example uses gpio-cells = 1 while it should be two (it is even
mentioned in the text above).
Cc: devicetree@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Conflicts:
Documentation/devicetree/bindings/net/micrel-ks8851.txt
net/core/netpoll.c
The net/core/netpoll.c conflict is a bug fix in 'net' happening
to code which is completely removed in 'net-next'.
In micrel-ks8851.txt we simply have overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
A few more updates for the merge window:
- Fixes for the simple-card DAI format DT mess.
- A new driver for Cirrus cs42xx8 devices.
- DT support for a couple more devices.
- A revert of a previous buggy fix for soc-pcm, plus a few more fixes
and cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wKyT
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.15-3' into asoc-next
ASoC: Updates for v3.15
A few more updates for the merge window:
- Fixes for the simple-card DAI format DT mess.
- A new driver for Cirrus cs42xx8 devices.
- DT support for a couple more devices.
- A revert of a previous buggy fix for soc-pcm, plus a few more fixes
and cleanups.
# gpg: Signature made Sun 23 Mar 2014 16:56:11 GMT using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg: aka "Mark Brown <broonie@debian.org>"
# gpg: aka "Mark Brown <broonie@kernel.org>"
# gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg: aka "Mark Brown <broonie@linaro.org>"
# gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
This is mostly a few additional fixes from Lars-Peter, a new driver and
cleaning up a git failure with merging the Intel branch (combined with
an xargs failure to pay attention to error codes). The history lists a
bunch of additional commits for the branch but the content of those
commits is actually present already but not recorded in history due to
git failing. Unfortunately xargs is used in the merge script and it
doesn't do a good job of noticing errors from the commands it invokes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=nG53
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.15-2' into asoc-next
ASoC: Updates for v3.15
This is mostly a few additional fixes from Lars-Peter, a new driver and
cleaning up a git failure with merging the Intel branch (combined with
an xargs failure to pay attention to error codes). The history lists a
bunch of additional commits for the branch but the content of those
commits is actually present already but not recorded in history due to
git failing. Unfortunately xargs is used in the merge script and it
doesn't do a good job of noticing errors from the commands it invokes.
# gpg: Signature made Thu 13 Mar 2014 14:25:44 GMT using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg: aka "Mark Brown <broonie@debian.org>"
# gpg: aka "Mark Brown <broonie@kernel.org>"
# gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg: aka "Mark Brown <broonie@linaro.org>"
# gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
Quite a busy release for ASoC this time, more on janitorial work than
exciting new features but welcome nontheless:
- Lots of cleanups from Takashi for enumerations; the original API for
these was error prone so he's refactored lots of code to use more
modern APIs which avoid issues.
- Elimination of the ASoC level wrappers for I2C and SPI moving us
closer to converting to regmap completely and avoiding some
randconfig hassle.
- Provide both manually and transparently locked DAPM APIs rather than
a mix of the two fixing some concurrency issues.
- Start converting CODEC drivers to use separate bus interface drivers
rather than having them all in one file helping avoid dependency
issues.
- DPCM support for Intel Haswell and Bay Trail platforms.
- Lots of work on improvements for simple-card, DaVinci and the Renesas
rcar drivers.
- New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
CSR SiRF SoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=C5oo
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.15' into asoc-next
ASoC: Updates for v3.15
Quite a busy release for ASoC this time, more on janitorial work than
exciting new features but welcome nontheless:
- Lots of cleanups from Takashi for enumerations; the original API for
these was error prone so he's refactored lots of code to use more
modern APIs which avoid issues.
- Elimination of the ASoC level wrappers for I2C and SPI moving us
closer to converting to regmap completely and avoiding some
randconfig hassle.
- Provide both manually and transparently locked DAPM APIs rather than
a mix of the two fixing some concurrency issues.
- Start converting CODEC drivers to use separate bus interface drivers
rather than having them all in one file helping avoid dependency
issues.
- DPCM support for Intel Haswell and Bay Trail platforms.
- Lots of work on improvements for simple-card, DaVinci and the Renesas
rcar drivers.
- New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
CSR SiRF SoC.
# gpg: Signature made Wed 12 Mar 2014 23:05:45 GMT using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg: aka "Mark Brown <broonie@debian.org>"
# gpg: aka "Mark Brown <broonie@kernel.org>"
# gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg: aka "Mark Brown <broonie@linaro.org>"
# gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
