Commit graph

70913 commits

Author SHA1 Message Date
Milton Miller
0b35786d77 kbuild: call make once for all targets when O=.. is used
Change the invocations of make in the output directory Makefile and the
main Makefile for separate object trees to pass all goals to one $(MAKE)
via a new phony target "sub-make" and the existing target _all.

When compiling with separate object directories, a separate make is called
in the context of another directory (from the output directory the main
Makefile is called, the Makefile is then restarted with current directory
set to the object tree).  Before this patch, when multiple make command
goals are specified, each target results in a separate make invocation.
With make -j, these invocations may run in parallel, resulting in multiple
commands running in the same directory clobbering each others results.

I did not try to address make -j for mixed dot-config and no-dot-config
targets.  Because the order does matter, a solution was not obvious.
Perhaps a simple check for MAKEFLAGS having -j and refusing to run would
be appropriate.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:20:32 +02:00
Roland McGrath
cf851aa756 kbuild: pass -g to assembler under CONFIG_DEBUG_INFO
The assembler for a while now supports -gdwarf to generate source line info
just like the C compiler does.  Source-level assembly debugging sounds like an
oxymoron, but it is handy to be able to see the right source file and read its
comments rather than just the disassembly.  This patch enables -gdwarf for
assembly files when CONFIG_DEBUG_INFO=y and the assembler supports the option.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:20:32 +02:00
Sam Ravnborg
14f31562db kbuild: update _shipped files for kconfig syntax cleanup
Update _shipped files so regular user does not
need to have bison/flex/gperf installed.
Code changes were contained in previous commit.

Used following program versions (on fedora):
bison (GNU Bison) 2.3
flex 2.5.33
GNU gperf 3.0.2

Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:20:32 +02:00
Adrian Bunk
247537b9a2 kconfig: syntax cleanup - drop support for "depends/requires/def_boolean"
Remove the following redundant and never or rarely used kconfig syntax:

- "def_boolean" (same as "def_bool")
- "requires" (same as "depends on")
- "depends" (same as "depends on")

This patch contains the code changes and Kconfig updates.
The shipped files are in next patch to let actual codechange stand out.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:20:32 +02:00
Sam Ravnborg
4f1127e204 kbuild: fix infinite make recursion
Jan Engelhardt <jengelh@computergmbh.de> reported:
You can cause a recursion in kbuild/make with the following:

make O=$PWD kernel/time.o
make mrproper

Of course no one would use O=$PWD (that's just the testcase),
but this happened too often:

/ws/linux/linux-2.6.23$ make O=/ws/linux/linux-2.6.23 kernel/time.o
(Oops - should have been O=/ws/linux/obj-2.6.23!)

Fixed by an explicit test for this case - we error
out if output directory and source directory are the same.

Tested-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:15:32 +02:00
Sam Ravnborg
a67cb1319f kconfig: fix segv fault in menuconfig
With specific configurations requesting help for certain
menu lines caused menuconfig to crash.
This was tracked down to a null pointer bug.
Thanks to "Miles Lane" <miles.lane@gmail.com> for inital reporting
and to Gabriel C <nix.or.die@googlemail.com> for the backtrace
that helped me locating the bug.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:15:32 +02:00
Sam Ravnborg
48874077dd kconfig: make comments stand out in menuconfig
Matěj Laitl <strohel@gmail.com> noticed that there was no way
to distingush between comments and un-selectable menu lines.
This patch marks comments with *** comment ***

Cc: Matěj Laitl <strohel@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:15:32 +02:00
Sam Ravnborg
f5fb976520 kbuild: fix directory traversal bug
Previously kbuild choked over the following:
obj-y += ../../../arch/i386/kernel/bootflag.o

This has resulted in some rather ugly workarounds in
current x86_64 tree.
This patch fixes kbuild to allow the above and enable
potential cleanups in x86_64 and maybe in other places.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:15:31 +02:00
Sam Ravnborg
c01b171d91 ia64: fix sn to add include files using EXTRA_CFLAGS
Changing the global CPPFLAGS is not the recommended way
to add additional include dirs.
Changed to use EXTRA_CFLAGS.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jes Sorensen <jes@sgi.com>
2007-10-12 21:15:31 +02:00
Randy Dunlap
6dd16f44a9 docproc: style & typo cleanups
- fix typos/spellos in docproc.c and Makefile
- add a little whitespace {while, switch} (coding style)
- use NULL instead of 0 for pointer testing

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:15:31 +02:00
Sam Ravnborg
70f75246cf kbuild: apply genksyms changes
This patch updates the _shipped files for genksyms.
See previous patch for actual functional changes.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:15:31 +02:00
Sam Ravnborg
3550a516d0 kbuild: __extension__ support in genksyms (fix unknown CRC warning)
Recently the __extension__ keyword has been introduced in the kernel.
Teach genksyms about this keyword so it can generate correct CRC for
exported symbols that uses a symbol marked __extension__.
For now only the typedef variant:

	__extension__ typedef ...

is supported.
Later we may add more variants as needed.

This patch contains the actual source file changes. The
following patch will hold modifications to the generated
files (*_shipped) and only after the second patch the fix
has effect.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:15:31 +02:00
Sam Ravnborg
a3a6261a11 kbuild: fix genksyms Makefile
When enabling GENERATE_PARSER the genksyms Makefile
failed to create _shipped version of generated files.

Modifying keywords.gperf failed to cause a rebuild
of genksyms.
Fixed by specifying keywowrds .c as explicit prerequisite
of the lexer.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:15:31 +02:00
Jesper Juhl
cc9eefdb9e kbuild: scripts/ver_linux : correct printing of binutils version
Currently scripts/ver_linux prints "Binutils" or other random
information for the version number in the "binutils" output line
on some distributions. This patch corrects that.

When I initially submitted a patch to correct that, I was not aware
that the output from "ld -v" could differ as much as it turned out
it can, so my original fix turned out to not cover all bases.
This patch works correctly with all the different "ld -v" output
that people posted in replys to my first patch, so it should be a
clear win over what we have currently.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:15:31 +02:00
Jesper Juhl
9cc3ef3034 kbuild: ver_linux fix glibc version print
Fix ver_linux glibc version printing (for real this time)

Alexey Dobriyan reported that commit
4a645d5ea6
broke ver_linux when glibc has a 3 digit
version number, and proposed a patch.
Al Viro then suggested a simpler way to
solve the problem which I've then simply
put into patch form.

Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:15:31 +02:00
Jesper Juhl
de47062a17 kbuild: improve scripts/gcc-version.sh output a bit when called without args
Currently, if you call scripts/gcc-version.sh without arguments it will
generate this output :

$ sh scripts/gcc-version.sh
scripts/gcc-version.sh: line 12: [: =: unary operator expected
scripts/gcc-version.sh: line 16: -E: command not found
scripts/gcc-version.sh: line 17: -E: command not found
0000

Not too pretty. I believe this is an improvement :

$ sh scripts/gcc-version.sh
Error: No compiler specified.
Usage:
        scripts/gcc-version.sh <gcc-command>

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:15:30 +02:00
Mike Frysinger
c34114f4ac kbuild: clean Modules.symvers in external module dirs
At the moment, running `make clean` in an external module directory does a
nice job of cleaning up with one exception: it leaves behind Modules.symvers.
Attached patch adds this file to the clean list for external modules.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:15:30 +02:00
Petr Stetiar
a83710e584 kbuild: fix segfault in modpost
Fix modpost segfault.

Before:
-------
ynezz@ntbk:~/linux-2.6.git$ scripts/mod/modpost vmlinux ath_pci.o
Segmentation fault

After:
------
ynezz@ntbk:~/linux-2.6.git$ scripts/mod/modpost vmlinux ath_pci.o
FATAL: section header offset=815726848 in file 'ath_pci.o' is bigger then filesize=153968

Sam: This seems to warn for a binutils issue. Anyway modpost should not
segfault.

Signed-off-by: Petr Stetiar <ynezz@true.cz>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:15:30 +02:00
Ram Pai
88f567f3a3 kbuild: fix perl usage in export_report.pl
Fixes some subtle perl coding bug observed
by Jan Engelhardt <jengelh@computergmbh.de>
This patch applies on top of Adrian's fix.

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Acked-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:13:50 +02:00
Adrian Bunk
cf9a6adeae kbuild: fix export_report.pl
This patch fixes an annoying bug of export_report.pl missing the usages
of some exports.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:13:50 +02:00
Paolo 'Blaisorblade' Giarrusso
0bce67352b kbuild: script to check for undefined Kconfig symbols
To avoid having to look manually for used but undefined Kconfig variables,
I've written a script which tries do this efficiently, in case all other
attention fail.  It accounts for _MODULE suffix and for UML_ prefixes to
Kconfig variable, but otherwise looks for exact matches (i.e.  \<CONFIG_;
this is done to exclude macros like MMCONFIG_).

Undefined Kconfig variables should be not be removed without care, but for
instance arch/i386/boot/ uses a bunch of undefined Kconfig vars:

$ scripts/checkunknowndefines.sh arch/i386/boot/
arch/i386/boot/video.h uses undefined symbol VIDEO_400_HACK
arch/i386/boot/video-vga.c uses undefined symbol VIDEO_400_HACK
arch/i386/boot/video.c uses undefined symbol VIDEO_RETAIN
arch/i386/boot/video.h uses undefined symbol VIDEO_RETAIN
arch/i386/boot/video.h uses undefined symbol VIDEO_SVGA
arch/i386/boot/video.h uses undefined symbol VIDEO_VESA
arch/i386/boot/video-vesa.c uses undefined symbol VIDEO_VESA

It should also be mentioned in SubmittingPatches and SubmitChecklist.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:13:50 +02:00
Sam Ravnborg
aa1e5ef5c1 kbuild: check if we can link gettext not just compile
cygwin provides the header file but the lib file needs
to be added manually. A generic fix is to check if
we can compile and link a program that uses gettext()
and if it fails fall back to NO_NLS.

International users of cygwin may have to specify
HOST_LOADLIBES := "-lintl" on the make command line.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:13:50 +02:00
Sam Ravnborg
4f4c4ee1b7 kbuild: Use Elfnn_Half as replacement for Elfnn_Section
The Elfnn_Section is not available on all platforms,
noteworthy are cygwin.
Use the safe replacement _Half.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:13:50 +02:00
Dhaval Giani
c8e91b0a8f [SCSI] gdth: fix CONFIG_ISA build failure
drivers/scsi/gdth.c: In function ‘gdth_search_dev’:
drivers/scsi/gdth.c:646: warning: ‘pci_find_device’ is deprecated
(declared at include/linux/pci.h:482)
drivers/scsi/gdth.c: In function ‘gdth_init_isa’:
drivers/scsi/gdth.c:857: error: ‘gdth_irq_tab’ undeclared (first use in
this function)
drivers/scsi/gdth.c:857: error: (Each undeclared identifier is reported
only once
drivers/scsi/gdth.c:857: error: for each function it appears in.)
drivers/scsi/gdth.c: In function ‘gdth_copy_internal_data’:
drivers/scsi/gdth.c:2362: warning: unused variable ‘sg’

Looking into the code I notice that gdth_irq_tab is not declared with
CONFIG_ISA=y and !CONFIG_EISA.

The values seem to be same in 2.6.23 (I am not sure why it has been put
with #ifdefs in -mm) so I have just modified the #ifdef to take care of
CONFIG_ISA as well.

Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:56:24 -04:00
Adrian Bunk
7624680824 [SCSI] esp_scsi: remove __dev{init,exit}
Since scsi_esp_{,un}register() are EXPORT_SYMBOL'ed, these functions
(and the functions they use) can't be __dev{init,exit}.

Based on a bug report by Rob Landley.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:56:19 -04:00
Boaz Harrosh
3892d88ae6 [SCSI] gdth: !use_sg cleanup and use of scsi accessors
gdth_execute() will issue an internal, none scsi-standard commands
onto __gdth_queuecommand(). Since it is not recommended to set
struct scsi_cmnd IO members in llds, gdth now uses internal IO
members for IO. In the case of gdth_execute() these members will be
set properly. In case the command was issued from scsi-ml
(by gdth_queuecommand) they will be set from scsi IO accessors.

  * define gdth IO accessors and use them throughout the driver.
  * use an sg-of-one in gdth_execute() and fix gdth_special_cmd()
    accordingly.
  * Clean the not use_sg code path and company

Signed-off-by Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:56:13 -04:00
Boaz Harrosh
f842b64e0f [SCSI] gdth: Move members from SCp to gdth_cmndinfo, stage 2
- Cleanup the rest of the scsi_cmnd->SCp members and move them
    to gdth_cmndinfo:
    SCp.this_residual 	 => priority
    SCp.buffers_residual => timeout
    SCp.Status 		 => status and dma_dir
    SCp.Message 	 => info
    SCp.have_data_in 	 => volatile wait_for_completion
    SCp.sent_command 	 => OpCode
    SCp.phase 		 => phase

  - Two more members will be naturally removed in the !use_sg cleanup

  TODO: What is the meaning of gdth_cmndinfo.phase? (rhetorically)

Signed-off-by Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:56:09 -04:00
Boaz Harrosh
3058d5de47 [SCSI] gdth: Setup proper per-command private data
- scsi_cmnd and specifically ->SCp of, where heavily abused
    with internal meaning members and flags. So introduce a new
    struct gdth_cmndinfo, put it on ->host_scribble and define a
    gdth_cmnd_priv() accessor to retrieve it from a scsi_cmnd.

  - The structure now holds two members:
    internal_command - replaces the IS_GDTH_INTERNAL_CMD() croft.
    sense_paddr - which was a 64-bit spanning on 2 32-bit members of SCp.
    More overloaded members from SCp and scsi_cmnd will be moved in a later
    patch (For easy review).

  - Split up gdth_queuecommand to an additional internal_function. The later
    is the one called by gdth_execute(). This will be more evident later in
    the scsi accessors patch, but it also facilitates in the differentiation
    between internal_command and external. And the setup of gdth_cmndinfo of
    each command.

Signed-off-by Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:56:05 -04:00
Boaz Harrosh
884f7fba09 [SCSI] gdth: Remove gdth_ctr_tab[]
- Places like Initialization and Reset that Just loop on all devices can
    use the link list with the list_for_each_entry macro.
    But the io_ctrl from user mode now suffers performance-wise because
    code has to do a sequential search for the requested host number.
    I have isolated this search in a gdth_find_ha(int hanum) member
    for future enhancement if needed.

Signed-off-by Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:56:00 -04:00
Christoph Hellwig
835cc24aff [SCSI] gdth: switch to modern scsi host registration
- Use scsi_add_host and friends and track instances ourselves. And
    generally modernize the driver's structure.

  - TODO: Next we can remove the controller table
  - TODO: Fix use of deprecated pci_find_device()

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:55 -04:00
Boaz Harrosh
10e1b4bc92 [SCSI] gdth: gdth_interrupt() gdth_get_status() & gdth_wait() fixes
- gdth_get_status() returns a single device interrupt IStatus
  - gdth_interrupt split to __gdth_interrupt() that receives
    flags if is called from gdth_wait().
  - Use dev_id passed from kernel and do not loop on all
    controllers.
  - gdth_wait(), get read of all global variables and call the new
    __gdth_interrupt with these variables on the stack

Signed-off-by Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:51 -04:00
Jeff Garzik
2855568b1e [libata] struct pci_dev related cleanups
* remove pointless pci_dev_to_dev() wrapper.  Just directly reference
  the embedded struct device like everyone else does.

* pata_cs5520: delete cs5520_remove_one(), it was a duplicate of
  ata_pci_remove_one()

* linux/libata.h: don't bother including linux/pci.h, we don't need it.
  Simply declare 'struct pci_dev' and assume interested parties will
  include the header, as they should be doing anyway.

* linux/libata.h: consolidate all CONFIG_PCI declarations into a
  single location in the header.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-12 14:55:47 -04:00
Tejun Heo
b06ce3e51e libata: use ata_exec_internal() for PMP register access
PMP registers used to be accessed with dedicated accessors ->pmp_read
and ->pmp_write.  During reset, those callbacks are called with the
port frozen so they should be able to run without depending on
interrupt delivery.  To achieve this, they were implemented polling.

However, as resetting the host port makes the PMP to isolate fan-out
ports until SError.X is cleared, resetting fan-out ports while port is
frozen doesn't buy much additional safety.

This patch updates libata PMP support such that PMP registers are
accessed using regular ata_exec_internal() mechanism and kills
->pmp_read/write() callbacks.  The following changes are made.

* PMP access helpers - sata_pmp_read_init_tf(), sata_pmp_read_val(),
  sata_pmp_write_init_tf() are folded into sata_pmp_read/write() which
  are now standalone PMP register access functions.

* sata_pmp_read/write() returns err_mask instead of rc.  This is
  consistent with other functions which issue internal commands and
  allows more detailed error reporting.

* ahci interrupt handler is modified to ignore BAD_PMP and
  spurious/illegal completion IRQs while reset is in progress.  These
  conditions are expected during reset.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:47 -04:00
Tejun Heo
afaa5c373d libata: implement ATA_PFLAG_RESETTING
Implement ATA_PFLAG_RESETTING.  This flag is set while reset is in
progress.  It's set before prereset is called and cleared after reset
fails or postreset is finished.

This flag itself doesn't have any function.  It will be used by LLDs
to tell whether reset is in progress if it needs to behave differently
during reset.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:47 -04:00
Tejun Heo
2b789108fc libata: add @timeout to ata_exec_internal[_sg]()
Add @timeout argument to ata_exec_internal[_sg]().  If 0, default
timeout ata_probe_timeout is used.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:47 -04:00
Tejun Heo
5f226c6bf7 ahci: fix notification handling
Asynchronous notification on ICH9 didn't work because it didn't write
AN FIS into the RX area - it only updates SNotification.  Also,
snooping SDB_FIS RX area is racy against further SDB FIS receptions.
Let sata_async_notification() determine using SNTF if it's available
and snoop RX area iff SNTF isn't available

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:47 -04:00
Tejun Heo
1c954a4d9a ahci: clean up PORT_IRQ_BAD_PMP enabling
Now that we have pp->intr_mask, move PORT_IRQ_BAD_PMP enabling to
ahci_pmp_attach/detach() where it belongs.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:47 -04:00
Boaz Harrosh
45f1a41b2b [SCSI] gdth: clean up host private data
- Based on same patch from Christoph Hellwig <hch@lst.de>

  - Get rid of all the indirection in the Scsi_Host private data and always
    put the gdth_ha_str directly into it.

  - Change all internal functions prototype to recieve an "gdth_ha_str *ha"
    pointer directlly and kill all that redundent access to the "gdth_ctr_tab[]"
    controller-table.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:46 -04:00
Tejun Heo
75da6d2b8f ahci: kill leftover from enabling NCQ over PMP
ahci had problems with NCQ over PMP and NCQ used to be disabled while
PMP was attached.  After fixing the problem, the temporary NCQ
disabling code wasn't removed completely.  Kill the remaining piece.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:46 -04:00
Tejun Heo
9073868376 libata: wrap schedule_timeout_uninterruptible() in loop
Tasks in uninterruptible sleep might be woken up by unrelated events
and should check whether the condition it was waiting for has actually
triggered.  Wrap schedule_timeout_uninterruptible() in loop to achieve
it.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:46 -04:00
Tejun Heo
94ff3d5408 libata: skip suppress reporting if ATA_EHI_QUIET
ATA_EHI_NO_AUTOPSY and ATA_EHI_QUIET are used during initial probing
to skip exception analysis and reporting.  Usually, there's nothing to
report but on some allowed but rare corner cases (e.g. phy status
changed interrupt when IRQ is enabled on frozen port - this happens if
IRQ pending status isn't cleared in the IRQ router or controller)
exception messages get printed.

Skip reporting if ATA_EHI_QUIET is set.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:46 -04:00
Tejun Heo
abf6e8ed07 libata: clear ehi description after initial host report
ehi description field is used to carry LLD specific controller
description.  Sometimes, it's used without clearing before and LLD
description gets printed with exception information one more time.
Clear after printing.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:46 -04:00
Tejun Heo
a01f48b8e7 pata_jmicron: match vendor and class code only
PATA part of all current JMB controllers behave the same way and
JMicron confirms that all future ones will stay compatible.  Drop
device matching and match only vendor and class.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Ethan Hsiao <ethanhsiao@jmicron.com>
Cc: Justin Tsai <justin@jmicron.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:46 -04:00
Tejun Heo
954bb005c9 libata: add ST9160821AS / 3.ALD to NCQ blacklist
ST9160821AS / 3.ALD also does spurious NCQ completions.  Disable NCQ.

Signed-off-by: Tejun Heo <teheo@suse.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:46 -04:00
Alan Cox
025621f9a7 pata_acpi: ACPI driver support
On a cable there may be
	eighty wires or perhaps forty
	and we learn about its type
	In the world of ACPI

	So we call the GTM
	And we find the the timing rate
	And we look through it to see
	If eighty wire it must be

	Timing lives in ACPI routines
	ACPI routines, ACPI routines
	Timing lives in ACPI routines
	ACPI routes ACPI routines

	And the drivers last you see
	Picking up unknown pci ids
	and the code begins to work

	Timing lives in ACPI routines
	ACPI routines, ACPI routines
	Timing lives in ACPI routines
	ACPI routes ACPI routines

	[Full speed ahead, Mr Hacker, full speed ahead]
	 Full speed over here sir!
	 Checking Cable, checking cable
	 Aye aye, 80 wire,
	 Heaven heaven]

	If we use ACPI (ACPI)
	Every box (every box) has all we need (has all we need)
	Cable type (cable type) and mode timing (mode timing)
	In our ATA (in our ATA) subroutines (subroutines, ha ha)

	Timing lives in ACPI routines
	ACPI routines, ACPI routines
	Timing lives in ACPI routines
	ACPI routes ACPI routines
	Timing lives in ACPI routines
	ACPI routines, ACPI routines
	Timing lives in ACPI routines
	ACPI routes ACPI routines

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:46 -04:00
Alan Cox
badff03df7 libata-core: Expose gtm methods for driver use
Talk to the dark side our driver has to, yes. Much misleading is the
data. Store it in a structure we do so that it may be parsed.

Signed-off-by: Alan Cox <alan@redhat.com>
--
Whats small, old and shouts phrases out of order across mountains ?
Yodla..
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:46 -04:00
Tejun Heo
70edb185db libata: add HDT722516DLA380 to NCQ blacklist
HDT722516DLA380 does spurious completion of NCQ commands.  Blacklist
it.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Frans Pop <elendil@planet.nl>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:46 -04:00
Paolo Ornati
da6f0ec2d5 libata: blacklist NCQ on Seagate Barracuda ST380817AS
Seagate Barracuda ST380817AS has troubles with NCQ. For example,
unpacking a tarball on an XFS filesystem gives this:

ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen
ata1.00: cmd 61/40:00:29:a3:98/00:00:00:00:00/40 tag 0 cdb 0x0 data 32768 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)

More info here:
http://lkml.org/lkml/2007/1/21/76

Blacklist it!

Signed-off-by: Paolo Ornati <ornati@fastwebnet.it>
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:45 -04:00
Jeff Garzik
6ebe9d8667 [libata] Turn on ACPI by default
Let's see what explodes.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-12 14:55:45 -04:00
Alan Cox
2db78dd302 libata_scsi: Fix ATAPI transfer lengths
Some controller variants snoop the ATAPI length value for Packet
transfers to do state machine and FIFO management. Thus we want to
set it properly, even for cases where it is otherwise meaningless.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:45 -04:00