forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

w1: Add 1-wire slave device driver for DS28E04-100

Browse source 
Signed-off-by: Markus Franke <franm@hrz.tu-chemnitz.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Markus Franke 2012-05-26 00:45:12 +02:00 • committed by Greg Kroah-Hartman
commit fbf7f7b4e2
6 changed files with 535 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

15
Documentation/ABI/stable/sysfs-driver-w1_ds28e04 Normal file
View file

@ -0,0 +1,15 @@
What: /sys/bus/w1/devices/.../pio
Date: May 2012
Contact: Markus Franke <franm@hrz.tu-chemnitz.de>
Description: read/write the contents of the two PIO's of the DS28E04-100
see Documentation/w1/slaves/w1_ds28e04 for detailed information
Users: any user space application which wants to communicate with DS28E04-100
What: /sys/bus/w1/devices/.../eeprom
Date: May 2012
Contact: Markus Franke <franm@hrz.tu-chemnitz.de>
Description: read/write the contents of the EEPROM memory of the DS28E04-100
see Documentation/w1/slaves/w1_ds28e04 for detailed information
Users: any user space application which wants to communicate with DS28E04-100

36
Documentation/w1/slaves/w1_ds28e04 Normal file
View file

@ -0,0 +1,36 @@
Kernel driver w1_ds28e04
========================
Supported chips:
* Maxim DS28E04-100 4096-Bit Addressable 1-Wire EEPROM with PIO
supported family codes:
W1_FAMILY_DS28E04 0x1C
Author: Markus Franke, <franke.m@sebakmt.com> <franm@hrz.tu-chemnitz.de>
Description
-----------
Support is provided through the sysfs files "eeprom" and "pio". CRC checking
during memory accesses can optionally be enabled/disabled via the device
attribute "crccheck". The strong pull-up can optionally be enabled/disabled
via the module parameter "w1_strong_pullup".
Memory Access
A read operation on the "eeprom" file reads the given amount of bytes
from the EEPROM of the DS28E04.
A write operation on the "eeprom" file writes the given byte sequence
to the EEPROM of the DS28E04. If CRC checking mode is enabled only
fully alligned blocks of 32 bytes with valid CRC16 values (in bytes 30
and 31) are allowed to be written.
PIO Access
The 2 PIOs of the DS28E04-100 are accessible via the "pio" sysfs file.
The current status of the PIO's is returned as an 8 bit value. Bit 0/1
represent the state of PIO_0/PIO_1. Bits 2..7 do not care. The PIO's are
driven low-active, i.e. the driver delivers/expects low-active values.

13
drivers/w1/slaves/Kconfig
View file

@ -94,6 +94,19 @@ config W1_SLAVE_DS2781
If you are unsure, say N.
config W1_SLAVE_DS28E04
tristate "4096-Bit Addressable 1-Wire EEPROM with PIO (DS28E04-100)"
depends on W1
select CRC16
help
If you enable this you will have the DS28E04-100
chip support.
Say Y here if you want to use a 1-wire
4kb EEPROM with PIO family device (DS28E04).
If you are unsure, say N.
config W1_SLAVE_BQ27000
tristate "BQ27000 slave support"
depends on W1

1
drivers/w1/slaves/Makefile
View file

@ -12,3 +12,4 @@ obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o
obj-$(CONFIG_W1_SLAVE_DS2780) += w1_ds2780.o
obj-$(CONFIG_W1_SLAVE_DS2781) += w1_ds2781.o
obj-$(CONFIG_W1_SLAVE_BQ27000) += w1_bq27000.o
obj-$(CONFIG_W1_SLAVE_DS28E04) += w1_ds28e04.o

469
drivers/w1/slaves/w1_ds28e04.c Normal file
View file

@ -0,0 +1,469 @@
/*
* w1_ds28e04.c - w1 family 1C (DS28E04) driver
*
* Copyright (c) 2012 Markus Franke <franke.m@sebakmt.com>
*
* This source code is licensed under the GNU General Public License,
* Version 2. See the file COPYING for more details.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/crc16.h>
#include <linux/uaccess.h>
#define CRC16_INIT 0
#define CRC16_VALID 0xb001
#include "../w1.h"
#include "../w1_int.h"
#include "../w1_family.h"
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Markus Franke <franke.m@sebakmt.com>, <franm@hrz.tu-chemnitz.de>");
MODULE_DESCRIPTION("w1 family 1C driver for DS28E04, 4kb EEPROM and PIO");
/* Allow the strong pullup to be disabled, but default to enabled.
* If it was disabled a parasite powered device might not get the required
* current to copy the data from the scratchpad to EEPROM. If it is enabled
* parasite powered devices have a better chance of getting the current
* required.
*/
static int w1_strong_pullup = 1;
module_param_named(strong_pullup, w1_strong_pullup, int, 0);
/* enable/disable CRC checking on DS28E04-100 memory accesses */
static char w1_enable_crccheck = 1;
#define W1_EEPROM_SIZE 512
#define W1_PAGE_COUNT 16
#define W1_PAGE_SIZE 32
#define W1_PAGE_BITS 5
#define W1_PAGE_MASK 0x1F
#define W1_F1C_READ_EEPROM 0xF0
#define W1_F1C_WRITE_SCRATCH 0x0F
#define W1_F1C_READ_SCRATCH 0xAA
#define W1_F1C_COPY_SCRATCH 0x55
#define W1_F1C_ACCESS_WRITE 0x5A
#define W1_1C_REG_LOGIC_STATE 0x220
struct w1_f1C_data {
u8 memory[W1_EEPROM_SIZE];
u32 validcrc;
};
/**
* Check the file size bounds and adjusts count as needed.
* This would not be needed if the file size didn't reset to 0 after a write.
*/
static inline size_t w1_f1C_fix_count(loff_t off, size_t count, size_t size)
{
if (off > size)
return 0;
if ((off + count) > size)
return size - off;
return count;
}
static int w1_f1C_refresh_block(struct w1_slave *sl, struct w1_f1C_data *data,
int block)
{
u8 wrbuf[3];
int off = block * W1_PAGE_SIZE;
if (data->validcrc & (1 << block))
return 0;
if (w1_reset_select_slave(sl)) {
data->validcrc = 0;
return -EIO;
}
wrbuf[0] = W1_F1C_READ_EEPROM;
wrbuf[1] = off & 0xff;
wrbuf[2] = off >> 8;
w1_write_block(sl->master, wrbuf, 3);
w1_read_block(sl->master, &data->memory[off], W1_PAGE_SIZE);
/* cache the block if the CRC is valid */
if (crc16(CRC16_INIT, &data->memory[off], W1_PAGE_SIZE) == CRC16_VALID)
data->validcrc |= (1 << block);
return 0;
}
static int w1_f1C_read(struct w1_slave *sl, int addr, int len, char *data)
{
u8 wrbuf[3];
/* read directly from the EEPROM */
if (w1_reset_select_slave(sl))
return -EIO;
wrbuf[0] = W1_F1C_READ_EEPROM;
wrbuf[1] = addr & 0xff;
wrbuf[2] = addr >> 8;
w1_write_block(sl->master, wrbuf, sizeof(wrbuf));
return w1_read_block(sl->master, data, len);
}
static ssize_t w1_f1C_read_bin(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
struct w1_slave *sl = kobj_to_w1_slave(kobj);
struct w1_f1C_data *data = sl->family_data;
int i, min_page, max_page;
count = w1_f1C_fix_count(off, count, W1_EEPROM_SIZE);
if (count == 0)
return 0;
mutex_lock(&sl->master->mutex);
if (w1_enable_crccheck) {
min_page = (off >> W1_PAGE_BITS);
max_page = (off + count - 1) >> W1_PAGE_BITS;
for (i = min_page; i <= max_page; i++) {
if (w1_f1C_refresh_block(sl, data, i)) {
count = -EIO;
goto out_up;
}
}
memcpy(buf, &data->memory[off], count);
} else {
count = w1_f1C_read(sl, off, count, buf);
}
out_up:
mutex_unlock(&sl->master->mutex);
return count;
}
/**
* Writes to the scratchpad and reads it back for verification.
* Then copies the scratchpad to EEPROM.
* The data must be on one page.
* The master must be locked.
*
* @param sl The slave structure
* @param addr Address for the write
* @param len length must be <= (W1_PAGE_SIZE - (addr & W1_PAGE_MASK))
* @param data The data to write
* @return 0=Success -1=failure
*/
static int w1_f1C_write(struct w1_slave *sl, int addr, int len, const u8 *data)
{
u8 wrbuf[4];
u8 rdbuf[W1_PAGE_SIZE + 3];
u8 es = (addr + len - 1) & 0x1f;
unsigned int tm = 10;
int i;
struct w1_f1C_data *f1C = sl->family_data;
/* Write the data to the scratchpad */
if (w1_reset_select_slave(sl))
return -1;
wrbuf[0] = W1_F1C_WRITE_SCRATCH;
wrbuf[1] = addr & 0xff;
wrbuf[2] = addr >> 8;
w1_write_block(sl->master, wrbuf, 3);
w1_write_block(sl->master, data, len);
/* Read the scratchpad and verify */
if (w1_reset_select_slave(sl))
return -1;
w1_write_8(sl->master, W1_F1C_READ_SCRATCH);
w1_read_block(sl->master, rdbuf, len + 3);
/* Compare what was read against the data written */
if ((rdbuf[0] != wrbuf[1]) || (rdbuf[1] != wrbuf[2]) ||
(rdbuf[2] != es) || (memcmp(data, &rdbuf[3], len) != 0))
return -1;
/* Copy the scratchpad to EEPROM */
if (w1_reset_select_slave(sl))
return -1;
wrbuf[0] = W1_F1C_COPY_SCRATCH;
wrbuf[3] = es;
for (i = 0; i < sizeof(wrbuf); ++i) {
/* issue 10ms strong pullup (or delay) on the last byte
for writing the data from the scratchpad to EEPROM */
if (w1_strong_pullup && i == sizeof(wrbuf)-1)
w1_next_pullup(sl->master, tm);
w1_write_8(sl->master, wrbuf[i]);
}
if (!w1_strong_pullup)
msleep(tm);
if (w1_enable_crccheck) {
/* invalidate cached data */
f1C->validcrc &= ~(1 << (addr >> W1_PAGE_BITS));
}
/* Reset the bus to wake up the EEPROM (this may not be needed) */
w1_reset_bus(sl->master);
return 0;
}
static ssize_t w1_f1C_write_bin(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
struct w1_slave *sl = kobj_to_w1_slave(kobj);
int addr, len, idx;
count = w1_f1C_fix_count(off, count, W1_EEPROM_SIZE);
if (count == 0)
return 0;
if (w1_enable_crccheck) {
/* can only write full blocks in cached mode */
if ((off & W1_PAGE_MASK) || (count & W1_PAGE_MASK)) {
dev_err(&sl->dev, "invalid offset/count off=%d cnt=%zd\n",
(int)off, count);
return -EINVAL;
}
/* make sure the block CRCs are valid */
for (idx = 0; idx < count; idx += W1_PAGE_SIZE) {
if (crc16(CRC16_INIT, &buf[idx], W1_PAGE_SIZE)
!= CRC16_VALID) {
dev_err(&sl->dev, "bad CRC at offset %d\n",
(int)off);
return -EINVAL;
}
}
}
mutex_lock(&sl->master->mutex);
/* Can only write data to one page at a time */
idx = 0;
while (idx < count) {
addr = off + idx;
len = W1_PAGE_SIZE - (addr & W1_PAGE_MASK);
if (len > (count - idx))
len = count - idx;
if (w1_f1C_write(sl, addr, len, &buf[idx]) < 0) {
count = -EIO;
goto out_up;
}
idx += len;
}
out_up:
mutex_unlock(&sl->master->mutex);
return count;
}
static ssize_t w1_f1C_read_pio(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
struct w1_slave *sl = kobj_to_w1_slave(kobj);
int ret;
/* check arguments */
if (off != 0 || count != 1 || buf == NULL)
return -EINVAL;
mutex_lock(&sl->master->mutex);
ret = w1_f1C_read(sl, W1_1C_REG_LOGIC_STATE, count, buf);
mutex_unlock(&sl->master->mutex);
return ret;
}
static ssize_t w1_f1C_write_pio(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
struct w1_slave *sl = kobj_to_w1_slave(kobj);
u8 wrbuf[3];
u8 ack;
/* check arguments */
if (off != 0 || count != 1 || buf == NULL)
return -EINVAL;
mutex_lock(&sl->master->mutex);
/* Write the PIO data */
if (w1_reset_select_slave(sl)) {
mutex_unlock(&sl->master->mutex);
return -1;
}
/* set bit 7..2 to value '1' */
*buf = *buf | 0xFC;
wrbuf[0] = W1_F1C_ACCESS_WRITE;
wrbuf[1] = *buf;
wrbuf[2] = ~(*buf);
w1_write_block(sl->master, wrbuf, 3);
w1_read_block(sl->master, &ack, sizeof(ack));
mutex_unlock(&sl->master->mutex);
/* check for acknowledgement */
if (ack != 0xAA)
return -EIO;
return count;
}
static ssize_t w1_f1C_show_crccheck(struct device *dev,
struct device_attribute *attr, char *buf)
{
if (put_user(w1_enable_crccheck + 0x30, buf))
return -EFAULT;
return sizeof(w1_enable_crccheck);
}
static ssize_t w1_f1C_store_crccheck(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
char val;
if (count != 1 || !buf)
return -EINVAL;
if (get_user(val, buf))
return -EFAULT;
/* convert to decimal */
val = val - 0x30;
if (val != 0 && val != 1)
return -EINVAL;
/* set the new value */
w1_enable_crccheck = val;
return sizeof(w1_enable_crccheck);
}
#define NB_SYSFS_BIN_FILES 2
static struct bin_attribute w1_f1C_bin_attr[NB_SYSFS_BIN_FILES] = {
{
.attr = {
.name = "eeprom",
.mode = S_IRUGO | S_IWUSR,
},
.size = W1_EEPROM_SIZE,
.read = w1_f1C_read_bin,
.write = w1_f1C_write_bin,
},
{
.attr = {
.name = "pio",
.mode = S_IRUGO | S_IWUSR,
},
.size = 1,
.read = w1_f1C_read_pio,
.write = w1_f1C_write_pio,
}
};
static DEVICE_ATTR(crccheck, S_IWUSR | S_IRUGO,
w1_f1C_show_crccheck, w1_f1C_store_crccheck);
static int w1_f1C_add_slave(struct w1_slave *sl)
{
int err = 0;
int i;
struct w1_f1C_data *data = NULL;
if (w1_enable_crccheck) {
data = kzalloc(sizeof(struct w1_f1C_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
sl->family_data = data;
}
/* create binary sysfs attributes */
for (i = 0; i < NB_SYSFS_BIN_FILES && !err; ++i)
err = sysfs_create_bin_file(
&sl->dev.kobj, &(w1_f1C_bin_attr[i]));
if (!err) {
/* create device attributes */
err = device_create_file(&sl->dev, &dev_attr_crccheck);
}
if (err) {
/* remove binary sysfs attributes */
for (i = 0; i < NB_SYSFS_BIN_FILES; ++i)
sysfs_remove_bin_file(
&sl->dev.kobj, &(w1_f1C_bin_attr[i]));
kfree(data);
}
return err;
}
static void w1_f1C_remove_slave(struct w1_slave *sl)
{
int i;
kfree(sl->family_data);
sl->family_data = NULL;
/* remove device attributes */
device_remove_file(&sl->dev, &dev_attr_crccheck);
/* remove binary sysfs attributes */
for (i = 0; i < NB_SYSFS_BIN_FILES; ++i)
sysfs_remove_bin_file(&sl->dev.kobj, &(w1_f1C_bin_attr[i]));
}
static struct w1_family_ops w1_f1C_fops = {
.add_slave = w1_f1C_add_slave,
.remove_slave = w1_f1C_remove_slave,
};
static struct w1_family w1_family_1C = {
.fid = W1_FAMILY_DS28E04,
.fops = &w1_f1C_fops,
};
static int __init w1_f1C_init(void)
{
return w1_register_family(&w1_family_1C);
}
static void __exit w1_f1C_fini(void)
{
w1_unregister_family(&w1_family_1C);
}
module_init(w1_f1C_init);
module_exit(w1_f1C_fini);

1
drivers/w1/w1_family.h
View file

@ -30,6 +30,7 @@
#define W1_FAMILY_SMEM_01 0x01
#define W1_FAMILY_SMEM_81 0x81
#define W1_THERM_DS18S20 0x10
#define W1_FAMILY_DS28E04 0x1C
#define W1_COUNTER_DS2423 0x1D
#define W1_THERM_DS1822 0x22
#define W1_EEPROM_DS2433 0x23