Merge branch 'perf/urgent' into perf/core, to resolve conflict and to prepare for new patches

Conflicts:
	arch/x86/kernel/traps.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Documentation/ABI/testing/sysfs-bus-pci

@@ -117,7 +117,7 @@ Description:
 
 What:		/sys/bus/pci/devices/.../vpd
 Date:		February 2008
-Contact:	Ben Hutchings <bhutchings@solarflare.com>
+Contact:	Ben Hutchings <bwh@kernel.org>
 Description:
 		A file named vpd in a device directory will be a
 		binary file containing the Vital Product Data for the

Documentation/DocBook/drm.tmpl

@@ -79,7 +79,7 @@
   <partintro>
     <para>
       This first part of the DRM Developer's Guide documents core DRM code,
-      helper libraries for writting drivers and generic userspace interfaces
+      helper libraries for writing drivers and generic userspace interfaces
       exposed by DRM drivers.
     </para>
   </partintro>
@@ -459,7 +459,7 @@ char *date;</synopsis>
       providing a solution to every graphics memory-related problems, GEM
       identified common code between drivers and created a support library to
       share it. GEM has simpler initialization and execution requirements than
-      TTM, but has no video RAM management capabitilies and is thus limited to
+      TTM, but has no video RAM management capabilities and is thus limited to
       UMA devices.
     </para>
     <sect2>
@@ -889,7 +889,7 @@ int (*prime_fd_to_handle)(struct drm_device *dev,
 	    vice versa. Drivers must use the kernel dma-buf buffer sharing framework
 	    to manage the PRIME file descriptors. Similar to the mode setting
 	    API PRIME is agnostic to the underlying buffer object manager, as
-	    long as handles are 32bit unsinged integers.
+	    long as handles are 32bit unsigned integers.
 	  </para>
 	  <para>
 	    While non-GEM drivers must implement the operations themselves, GEM
@@ -2356,7 +2356,7 @@ void intel_crt_init(struct drm_device *dev)
       first create properties and then create and associate individual instances
       of those properties to objects. A property can be instantiated multiple
       times and associated with different objects. Values are stored in property
-      instances, and all other property information are stored in the propery
+      instances, and all other property information are stored in the property
       and shared between all instances of the property.
     </para>
     <para>
@@ -2697,10 +2697,10 @@ int num_ioctls;</synopsis>
   <sect1>
     <title>Legacy Support Code</title>
     <para>
-      The section very brievely covers some of the old legacy support code which
+      The section very briefly covers some of the old legacy support code which
       is only used by old DRM drivers which have done a so-called shadow-attach
       to the underlying device instead of registering as a real driver. This
-      also includes some of the old generic buffer mangement and command
+      also includes some of the old generic buffer management and command
       submission code. Do not use any of this in new and modern drivers.
     </para>
 

Documentation/DocBook/media/Makefile

@@ -195,7 +195,7 @@ DVB_DOCUMENTED = \
 #
 
 install_media_images = \
-	$(Q)cp $(OBJIMGFILES) $(MEDIA_SRC_DIR)/v4l/*.svg $(MEDIA_OBJ_DIR)/media_api
+	$(Q)-cp $(OBJIMGFILES) $(MEDIA_SRC_DIR)/v4l/*.svg $(MEDIA_OBJ_DIR)/media_api
 
 $(MEDIA_OBJ_DIR)/%: $(MEDIA_SRC_DIR)/%.b64
 	$(Q)base64 -d $< >$@

Documentation/debugging-via-ohci1394.txt

@@ -25,9 +25,11 @@ using data transfer rates in the order of 10MB/s or more.
 With most FireWire controllers, memory access is limited to the low 4 GB
 of physical address space.  This can be a problem on IA64 machines where
 memory is located mostly above that limit, but it is rarely a problem on
-more common hardware such as x86, x86-64 and PowerPC.  However, at least
+more common hardware such as x86, x86-64 and PowerPC.
-Agere/LSI FW643e and FW643e2 controllers are known to support access to
+
-physical addresses above 4 GB.
+At least LSI FW643e and FW643e2 controllers are known to support access to
+physical addresses above 4 GB, but this feature is currently not enabled by
+Linux.
 
 Together with a early initialization of the OHCI-1394 controller for debugging,
 this facility proved most useful for examining long debugs logs in the printk
@@ -101,8 +103,9 @@ Step-by-step instructions for using firescope with early OHCI initialization:
    compliant, they are based on TI PCILynx chips and require drivers for Win-
    dows operating systems.
 
-   The mentioned kernel log message contains ">4 GB phys DMA" in case of
+   The mentioned kernel log message contains the string "physUB" if the
-   OHCI-1394 controllers which support accesses above this limit.
+   controller implements a writable Physical Upper Bound register.  This is
+   required for physical DMA above 4 GB (but not utilized by Linux yet).
 
 2) Establish a working FireWire cable connection:
 

Documentation/device-mapper/thin-provisioning.txt

@@ -309,7 +309,10 @@ ii) Status
     error_if_no_space|queue_if_no_space
 	If the pool runs out of data or metadata space, the pool will
 	either queue or error the IO destined to the data device.  The
-	default is to queue the IO until more space is added.
+	default is to queue the IO until more space is added or the
+	'no_space_timeout' expires.  The 'no_space_timeout' dm-thin-pool
+	module parameter can be used to change this timeout -- it
+	defaults to 60 seconds but may be disabled using a value of 0.
 
 iii) Messages
 

Documentation/devicetree/bindings/clock/at91-clock.txt

@@ -62,7 +62,7 @@ Required properties for PMC node:
 - interrupt-controller : tell that the PMC is an interrupt controller.
 - #interrupt-cells : must be set to 1. The first cell encodes the interrupt id,
 	and reflect the bit position in the PMC_ER/DR/SR registers.
-	You can use the dt macros defined in dt-bindings/clk/at91.h.
+	You can use the dt macros defined in dt-bindings/clock/at91.h.
 	0 (AT91_PMC_MOSCS) -> main oscillator ready
 	1 (AT91_PMC_LOCKA) -> PLL A ready
 	2 (AT91_PMC_LOCKB) -> PLL B ready

Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt

@@ -43,7 +43,7 @@ Example
 		clock-output-names =
 			"tpu0", "mmcif1", "sdhi3", "sdhi2",
 			 "sdhi1", "sdhi0", "mmcif0";
-		renesas,clock-indices = <
+		clock-indices = <
 			R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
 			R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0
 			R8A7790_CLK_MMCIF0

Documentation/devicetree/bindings/dma/ti-edma.txt

@@ -29,6 +29,6 @@ edma: edma@49000000 {
 	dma-channels = <64>;
 	ti,edma-regions = <4>;
 	ti,edma-slots = <256>;
-	ti,edma-xbar-event-map = <1 12
+	ti,edma-xbar-event-map = /bits/ 16 <1 12
-				  2 13>;
+					    2 13>;
 };

Documentation/devicetree/bindings/net/mdio-gpio.txt

@@ -14,7 +14,7 @@ node.
 Example:
 
 aliases {
-	mdio-gpio0 = <&mdio0>;
+	mdio-gpio0 = &mdio0;
 };
 
 mdio0: mdio {

Documentation/email-clients.txt

@@ -201,20 +201,15 @@ To beat some sense out of the internal editor, do this:
 
 - Edit your Thunderbird config settings so that it won't use format=flowed.
   Go to "edit->preferences->advanced->config editor" to bring up the
-  thunderbird's registry editor, and set "mailnews.send_plaintext_flowed" to
+  thunderbird's registry editor.
-  "false".
 
-- Disable HTML Format: Set "mail.identity.id1.compose_html" to "false".
+- Set "mailnews.send_plaintext_flowed" to "false"
 
-- Enable "preformat" mode: Set "editor.quotesPreformatted" to "true".
+- Set "mailnews.wraplength" from "72" to "0"
 
-- Enable UTF8: Set "prefs.converted-to-utf8" to "true".
+- "View" > "Message Body As" > "Plain Text"
 
-- Install the "toggle wordwrap" extension.  Download the file from:
+- "View" > "Character Encoding" > "Unicode (UTF-8)"
-    https://addons.mozilla.org/thunderbird/addon/2351/
-  Then go to "tools->add ons", select "install" at the bottom of the screen,
-  and browse to where you saved the .xul file.  This adds an "Enable
-  Wordwrap" entry under the Options menu of the message composer.
 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 TkRat (GUI)

Documentation/filesystems/proc.txt

@@ -1245,8 +1245,9 @@ second).  The meanings of the columns are as follows, from left to right:
 
 The "intr" line gives counts of interrupts  serviced since boot time, for each
 of the  possible system interrupts.   The first  column  is the  total of  all
-interrupts serviced; each  subsequent column is the  total for that particular
+interrupts serviced  including  unnumbered  architecture specific  interrupts;
-interrupt.
+each  subsequent column is the  total for that particular numbered interrupt.
+Unnumbered interrupts are not shown, only summed into the total.
 
 The "ctxt" line gives the total number of context switches across all CPUs.
 

Documentation/hwmon/sysfs-interface

@@ -327,6 +327,13 @@ temp[1-*]_max_hyst
 		from the max value.
 		RW
 
+temp[1-*]_min_hyst
+		Temperature hysteresis value for min limit.
+		Unit: millidegree Celsius
+		Must be reported as an absolute temperature, NOT a delta
+		from the min value.
+		RW
+
 temp[1-*]_input Temperature input value.
 		Unit: millidegree Celsius
 		RO
@@ -362,6 +369,13 @@ temp[1-*]_lcrit	Temperature critical min value, typically lower than
 		Unit: millidegree Celsius
 		RW
 
+temp[1-*]_lcrit_hyst
+		Temperature hysteresis value for critical min limit.
+		Unit: millidegree Celsius
+		Must be reported as an absolute temperature, NOT a delta
+		from the critical min value.
+		RW
+
 temp[1-*]_offset
 		Temperature offset which is added to the temperature reading
 		by the chip.

Documentation/input/elantech.txt

@@ -504,9 +504,12 @@ byte 5:
 * reg_10
 
    bit   7   6   5   4   3   2   1   0
-         0   0   0   0   0   0   0   A
+         0   0   0   0   R   F   T   A
 
          A: 1 = enable absolute tracking
+         T: 1 = enable two finger mode auto correct
+         F: 1 = disable ABS Position Filter
+         R: 1 = enable real hardware resolution
 
 6.2 Native absolute mode 6 byte packet format
     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Documentation/java.txt

@@ -188,6 +188,9 @@ shift
 #define CP_METHODREF 10
 #define CP_INTERFACEMETHODREF 11
 #define CP_NAMEANDTYPE 12
+#define CP_METHODHANDLE 15
+#define CP_METHODTYPE 16
+#define CP_INVOKEDYNAMIC 18
 
 /* Define some commonly used error messages */
 
@@ -242,14 +245,19 @@ void skip_constant(FILE *classfile, u_int16_t *cur)
 		break;
 	case CP_CLASS:
 	case CP_STRING:
+	case CP_METHODTYPE:
 		seekerr = fseek(classfile, 2, SEEK_CUR);
 		break;
+	case CP_METHODHANDLE:
+		seekerr = fseek(classfile, 3, SEEK_CUR);
+		break;
 	case CP_INTEGER:
 	case CP_FLOAT:
 	case CP_FIELDREF:
 	case CP_METHODREF:
 	case CP_INTERFACEMETHODREF:
 	case CP_NAMEANDTYPE:
+	case CP_INVOKEDYNAMIC:
 		seekerr = fseek(classfile, 4, SEEK_CUR);
 		break;
 	case CP_LONG:

Documentation/kernel-parameters.txt

@@ -2218,10 +2218,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	noreplace-smp	[X86-32,SMP] Don't replace SMP instructions
 			with UP alternatives
 
-	nordrand	[X86] Disable the direct use of the RDRAND
+	nordrand	[X86] Disable kernel use of the RDRAND and
-			instruction even if it is supported by the
+			RDSEED instructions even if they are supported
-			processor.  RDRAND is still available to user
+			by the processor.  RDRAND and RDSEED are still
-			space applications.
+			available to user space applications.
 
 	noresume	[SWSUSP] Disables resume and restores original swap
 			space.

Documentation/networking/filter.txt

@@ -277,7 +277,7 @@ Possible BPF extensions are shown in the following table:
   mark                                  skb->mark
   queue                                 skb->queue_mapping
   hatype                                skb->dev->type
-  rxhash                                skb->rxhash
+  rxhash                                skb->hash
   cpu                                   raw_smp_processor_id()
   vlan_tci                              vlan_tx_tag_get(skb)
   vlan_pr                               vlan_tx_tag_present(skb)

Documentation/networking/packet_mmap.txt

@@ -578,7 +578,7 @@ processes. This also works in combination with mmap(2) on packet sockets.
 
 Currently implemented fanout policies are:
 
-  - PACKET_FANOUT_HASH: schedule to socket by skb's rxhash
+  - PACKET_FANOUT_HASH: schedule to socket by skb's packet hash
   - PACKET_FANOUT_LB: schedule to socket by round-robin
   - PACKET_FANOUT_CPU: schedule to socket by CPU packet arrives on
   - PACKET_FANOUT_RND: schedule to socket by random selection

Documentation/virtual/kvm/api.txt

@@ -2126,7 +2126,7 @@ into the hash PTE second double word).
 4.75 KVM_IRQFD
 
 Capability: KVM_CAP_IRQFD
-Architectures: x86
+Architectures: x86 s390
 Type: vm ioctl
 Parameters: struct kvm_irqfd (in)
 Returns: 0 on success, -1 on error

MAINTAINERS

@@ -537,7 +537,7 @@ L:	linux-alpha@vger.kernel.org
 F:	arch/alpha/
 
 ALTERA TRIPLE SPEED ETHERNET DRIVER
-M:	Vince Bridgers <vbridgers2013@gmail.com
+M:	Vince Bridgers <vbridgers2013@gmail.com>
 L:	netdev@vger.kernel.org
 L:	nios2-dev@lists.rocketboards.org (moderated for non-subscribers)
 S:	Maintained
@@ -1893,14 +1893,15 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/broadcom/bnx2x/
 
-BROADCOM BCM281XX/BCM11XXX ARM ARCHITECTURE
+BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
 M:	Christian Daudt <bcm@fixthebug.org>
 M:	Matt Porter <mporter@linaro.org>
 L:	bcm-kernel-feedback-list@broadcom.com
-T:	git git://git.github.com/broadcom/bcm11351
+T:	git git://github.com/broadcom/mach-bcm
 S:	Maintained
 F:	arch/arm/mach-bcm/
 F:	arch/arm/boot/dts/bcm113*
+F:	arch/arm/boot/dts/bcm216*
 F:	arch/arm/boot/dts/bcm281*
 F:	arch/arm/configs/bcm_defconfig
 F:	drivers/mmc/host/sdhci_bcm_kona.c
@@ -2245,12 +2246,6 @@ L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/host/ohci-ep93xx.c
 
-CIRRUS LOGIC CS4270 SOUND DRIVER
-M:	Timur Tabi <timur@tabi.org>
-L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
-S:	Odd Fixes
-F:	sound/soc/codecs/cs4270*
-
 CIRRUS LOGIC AUDIO CODEC DRIVERS
 M:	Brian Austin <brian.austin@cirrus.com>
 M:	Paul Handrigan <Paul.Handrigan@cirrus.com>
@@ -4818,6 +4813,14 @@ L:	linux-kernel@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
 F:	kernel/irq/
+
+IRQCHIP DRIVERS
+M:	Thomas Gleixner <tglx@linutronix.de>
+M:	Jason Cooper <jason@lakedaemon.net>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
+T:	git git://git.infradead.org/users/jcooper/linux.git irqchip/core
 F:	drivers/irqchip/
 
 IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
@@ -5490,15 +5493,15 @@ F:	Documentation/hwmon/ltc4261
 F:	drivers/hwmon/ltc4261.c
 
 LTP (Linux Test Project)
-M:	Shubham Goyal <shubham@linux.vnet.ibm.com>
 M:	Mike Frysinger <vapier@gentoo.org>
 M:	Cyril Hrubis <chrubis@suse.cz>
-M:	Caspar Zhang <caspar@casparzhang.com>
 M:	Wanlong Gao <gaowanlong@cn.fujitsu.com>
+M:	Jan Stancek <jstancek@redhat.com>
+M:	Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com>
+M:	Alexey Kodanev <alexey.kodanev@oracle.com>
 L:	ltp-list@lists.sourceforge.net (subscribers-only)
-W:	http://ltp.sourceforge.net/
+W:	http://linux-test-project.github.io/
 T:	git git://github.com/linux-test-project/ltp.git
-T:	git git://ltp.git.sourceforge.net/gitroot/ltp/ltp-dev
 S:	Maintained
 
 M32R ARCHITECTURE
@@ -6511,10 +6514,10 @@ T:	git git://openrisc.net/~jonas/linux
 F:	arch/openrisc/
 
 OPENVSWITCH
-M:	Jesse Gross <jesse@nicira.com>
+M:	Pravin Shelar <pshelar@nicira.com>
 L:	dev@openvswitch.org
 W:	http://openvswitch.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pshelar/openvswitch.git
 S:	Maintained
 F:	net/openvswitch/
 
@@ -7402,6 +7405,14 @@ F:	drivers/rpmsg/
 F:	Documentation/rpmsg.txt
 F:	include/linux/rpmsg.h
 
+RESET CONTROLLER FRAMEWORK
+M:	Philipp Zabel <p.zabel@pengutronix.de>
+S:	Maintained
+F:	drivers/reset/
+F:	Documentation/devicetree/bindings/reset/
+F:	include/linux/reset.h
+F:	include/linux/reset-controller.h
+
 RFKILL
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
@@ -9107,6 +9118,9 @@ F:	arch/um/os-Linux/drivers/
 
 TURBOCHANNEL SUBSYSTEM
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
+M:	Ralf Baechle <ralf@linux-mips.org>
+L:	linux-mips@linux-mips.org
+Q:	http://patchwork.linux-mips.org/project/linux-mips/list/
 S:	Maintained
 F:	drivers/tc/
 F:	include/linux/tc.h

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 15
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc8
 NAME = Shuffling Zombie Juror
 
 # *DOCUMENTATION*

arch/arm/boot/dts/am33xx.dtsi

@@ -144,7 +144,7 @@
 			compatible = "ti,edma3";
 			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
 			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x10>;
+				<0x44e10f90 0x40>;
 			interrupts = <12 13 14>;
 			#dma-cells = <1>;
 			dma-channels = <64>;

arch/arm/boot/dts/am3517.dtsi

@@ -62,5 +62,21 @@
 	};
 };
 
+&iva {
+	status = "disabled";
+};
+
+&mailbox {
+	status = "disabled";
+};
+
+&mmu_isp {
+	status = "disabled";
+};
+
+&smartreflex_mpu_iva {
+	status = "disabled";
+};
+
 /include/ "am35xx-clocks.dtsi"
 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"

arch/arm/boot/dts/am437x-gp-evm.dts

@@ -117,6 +117,11 @@
 	status = "okay";
 };
 
+&gpio5 {
+	status = "okay";
+	ti,no-reset-on-init;
+};
+
 &mmc1 {
 	status = "okay";
 	vmmc-supply = <&vmmcsd_fixed>;

arch/arm/boot/dts/armada-370-db.dts

@@ -67,6 +67,7 @@
 			i2c@11000 {
 				pinctrl-0 = <&i2c0_pins>;
 				pinctrl-names = "default";
+				clock-frequency = <100000>;
 				status = "okay";
 				audio_codec: audio-codec@4a {
 					compatible = "cirrus,cs42l51";

arch/arm/boot/dts/armada-375-db.dts

@@ -79,6 +79,11 @@
 				};
 			};
 
+			sata@a0000 {
+				status = "okay";
+				nr-ports = <2>;
+			};
+
 			nand: nand@d0000 {
 				pinctrl-0 = <&nand_pins>;
 				pinctrl-names = "default";

arch/arm/boot/dts/armada-380.dtsi

@@ -99,7 +99,7 @@
 			pcie@3,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
+				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				#interrupt-cells = <1>;

arch/arm/boot/dts/armada-385.dtsi

@@ -110,7 +110,7 @@
 			pcie@3,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
+				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				#interrupt-cells = <1>;
@@ -131,7 +131,7 @@
 			pcie@4,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
+				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				#interrupt-cells = <1>;

arch/arm/boot/dts/armada-xp-db.dts

@@ -49,7 +49,7 @@
 			/* Device Bus parameters are required */
 
 			/* Read parameters */
-			devbus,bus-width    = <8>;
+			devbus,bus-width    = <16>;
 			devbus,turn-off-ps  = <60000>;
 			devbus,badr-skew-ps = <0>;
 			devbus,acc-first-ps = <124000>;

arch/arm/boot/dts/armada-xp-gp.dts

@@ -59,7 +59,7 @@
 			/* Device Bus parameters are required */
 
 			/* Read parameters */
-			devbus,bus-width    = <8>;
+			devbus,bus-width    = <16>;
 			devbus,turn-off-ps  = <60000>;
 			devbus,badr-skew-ps = <0>;
 			devbus,acc-first-ps = <124000>;
@@ -146,22 +146,22 @@
 			ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
-				phy-mode = "rgmii-id";
+				phy-mode = "qsgmii";
 			};
 			ethernet@74000 {
 				status = "okay";
 				phy = <&phy1>;
-				phy-mode = "rgmii-id";
+				phy-mode = "qsgmii";
 			};
 			ethernet@30000 {
 				status = "okay";
 				phy = <&phy2>;
-				phy-mode = "rgmii-id";
+				phy-mode = "qsgmii";
 			};
 			ethernet@34000 {
 				status = "okay";
 				phy = <&phy3>;
-				phy-mode = "rgmii-id";
+				phy-mode = "qsgmii";
 			};
 
 			/* Front-side USB slot */

arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts

@@ -39,7 +39,7 @@
 			/* Device Bus parameters are required */
 
 			/* Read parameters */
-			devbus,bus-width    = <8>;
+			devbus,bus-width    = <16>;
 			devbus,turn-off-ps  = <60000>;
 			devbus,badr-skew-ps = <0>;
 			devbus,acc-first-ps = <124000>;

arch/arm/boot/dts/at91-sama5d3_xplained.dts

@@ -34,7 +34,7 @@
 			};
 
 			spi0: spi@f0004000 {
-				cs-gpios = <&pioD 13 0>;
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
 				status = "okay";
 			};
 
@@ -79,7 +79,7 @@
 			};
 
 			spi1: spi@f8008000 {
-				cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioD 16 0>;
+				cs-gpios = <&pioC 25 0>;
 				status = "okay";
 			};
 

arch/arm/boot/dts/at91sam9260.dtsi

@@ -641,7 +641,7 @@
 				trigger@3 {
 					reg = <3>;
 					trigger-name = "external";
-					trigger-value = <0x13>;
+					trigger-value = <0xd>;
 					trigger-external;
 				};
 			};

arch/arm/boot/dts/at91sam9261.dtsi

@@ -10,7 +10,7 @@
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
 	model = "Atmel AT91SAM9261 family SoC";

arch/arm/boot/dts/at91sam9rl.dtsi

@@ -8,7 +8,7 @@
 
 #include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 

arch/arm/boot/dts/exynos4412-trats2.dts

@@ -503,7 +503,7 @@
 		status = "okay";
 
 		ak8975@0c {
-			compatible = "ak,ak8975";
+			compatible = "asahi-kasei,ak8975";
 			reg = <0x0c>;
 			gpios = <&gpj0 7 0>;
 		};

arch/arm/boot/dts/exynos5250-arndale.dts

@@ -107,6 +107,7 @@
 					regulator-name = "VDD_IOPERI_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
 					op_mode = <1>;
 				};
 

arch/arm/boot/dts/exynos5420-arndale-octa.dts

@@ -364,16 +364,4 @@
 			gpio-key,wakeup;
 		};
 	};
-
-	amba {
-		mdma1: mdma@11C10000 {
-			/*
-			 * MDMA1 can support both secure and non-secure
-			 * AXI transactions. When this is enabled in the kernel
-			 * for boards that run in secure mode, we are getting
-			 * imprecise external aborts causing the kernel to oops.
-			 */
-			status = "disabled";
-		};
-	};
 };

arch/arm/boot/dts/exynos5420.dtsi

@@ -219,16 +219,6 @@
 		reg = <0x100440C0 0x20>;
 	};
 
-	mau_pd: power-domain@100440E0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x100440E0 0x20>;
-	};
-
-	g2d_pd: power-domain@10044100 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044100 0x20>;
-	};
-
 	msc_pd: power-domain@10044120 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044120 0x20>;
@@ -336,6 +326,13 @@
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <1>;
+			/*
+			 * MDMA1 can support both secure and non-secure
+			 * AXI transactions. When this is enabled in the kernel
+			 * for boards that run in secure mode, we are getting
+			 * imprecise external aborts causing the kernel to oops.
+			 */
+			status = "disabled";
 		};
 	};
 
@@ -385,7 +382,7 @@
 	spi_0: spi@12d20000 {
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x12d20000 0x100>;
-		interrupts = <0 66 0>;
+		interrupts = <0 68 0>;
 		dmas = <&pdma0 5
 			&pdma0 4>;
 		dma-names = "tx", "rx";
@@ -401,7 +398,7 @@
 	spi_1: spi@12d30000 {
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x12d30000 0x100>;
-		interrupts = <0 67 0>;
+		interrupts = <0 69 0>;
 		dmas = <&pdma1 5
 			&pdma1 4>;
 		dma-names = "tx", "rx";
@@ -417,7 +414,7 @@
 	spi_2: spi@12d40000 {
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x12d40000 0x100>;
-		interrupts = <0 68 0>;
+		interrupts = <0 70 0>;
 		dmas = <&pdma0 7
 			&pdma0 6>;
 		dma-names = "tx", "rx";
@@ -730,6 +727,5 @@
 		interrupts = <0 112 0>;
 		clocks = <&clock 471>;
 		clock-names = "secss";
-		samsung,power-domain = <&g2d_pd>;
 	};
 };

arch/arm/boot/dts/imx53-mba53.dts

@@ -244,7 +244,7 @@
 &tve {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_vga_sync_1>;
-	i2c-ddc-bus = <&i2c3>;
+	ddc-i2c-bus = <&i2c3>;
 	fsl,tve-mode = "vga";
 	fsl,hsync-pin = <4>;
 	fsl,vsync-pin = <6>;

arch/arm/boot/dts/imx53.dtsi

@@ -115,7 +115,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,imx53-ipu";
-			reg = <0x18000000 0x080000000>;
+			reg = <0x18000000 0x08000000>;
 			interrupts = <11 10>;
 			clocks = <&clks IMX5_CLK_IPU_GATE>,
 			         <&clks IMX5_CLK_IPU_DI0_GATE>,

arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts

@@ -30,6 +30,16 @@
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
 	};
 
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+        };
+
 	ocp@f1000000 {
 		pinctrl@10000 {
 			pmx_usb_led: pmx-usb-led {
@@ -73,14 +83,6 @@
 		ehci@50000 {
 			status = "okay";
 		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
 	};
 
 	gpio-leds {

arch/arm/boot/dts/kirkwood-nsa310-common.dtsi

@@ -4,6 +4,16 @@
 / {
 	model = "ZyXEL NSA310";
 
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		pinctrl: pinctrl@10000 {
 
@@ -26,14 +36,6 @@
 			status = "okay";
 			nr-ports = <2>;
 		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
 	};
 
 	gpio_poweroff {

arch/arm/boot/dts/kirkwood-t5325.dts

@@ -127,11 +127,6 @@
 
 		i2c@11000 {
 			status = "okay";
-
-			alc5621: alc5621@1a {
-				compatible = "realtek,alc5621";
-				reg = <0x1a>;
-			};
 		};
 
 		serial@12000 {

arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi

@@ -24,11 +24,10 @@
 		compatible = "smsc,lan9221", "smsc,lan9115";
 		bank-width = <2>;
 		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <0>;
+		gpmc,cs-on-ns = <1>;
-		gpmc,cs-rd-off-ns = <186>;
+		gpmc,cs-rd-off-ns = <180>;
-		gpmc,cs-wr-off-ns = <186>;
+		gpmc,cs-wr-off-ns = <180>;
-		gpmc,adv-on-ns = <12>;
+		gpmc,adv-rd-off-ns = <18>;
-		gpmc,adv-rd-off-ns = <48>;
 		gpmc,adv-wr-off-ns = <48>;
 		gpmc,oe-on-ns = <54>;
 		gpmc,oe-off-ns = <168>;
@@ -36,12 +35,10 @@
 		gpmc,we-off-ns = <168>;
 		gpmc,rd-cycle-ns = <186>;
 		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <114>;
+		gpmc,access-ns = <144>;
-		gpmc,page-burst-access-ns = <6>;
+		gpmc,page-burst-access-ns = <24>;
-		gpmc,bus-turnaround-ns = <12>;
+		gpmc,bus-turnaround-ns = <90>;
-		gpmc,cycle2cycle-delay-ns = <18>;
+		gpmc,cycle2cycle-delay-ns = <90>;
-		gpmc,wr-data-mux-bus-ns = <90>;
-		gpmc,wr-access-ns = <186>;
 		gpmc,cycle2cycle-samecsen;
 		gpmc,cycle2cycle-diffcsen;
 		vddvario-supply = <&vddvario>;

arch/arm/boot/dts/omap2.dtsi

@@ -71,13 +71,6 @@
 			interrupts = <58>;
 		};
 
-		mailbox: mailbox@48094000 {
-			compatible = "ti,omap2-mailbox";
-			ti,hwmods = "mailbox";
-			reg = <0x48094000 0x200>;
-			interrupts = <26>;
-		};
-
 		intc: interrupt-controller@1 {
 			compatible = "ti,omap2-intc";
 			interrupt-controller;

arch/arm/boot/dts/omap2420.dtsi

@@ -125,6 +125,14 @@
 			dma-names = "tx", "rx";
 		};
 
+		mailbox: mailbox@48094000 {
+			compatible = "ti,omap2-mailbox";
+			reg = <0x48094000 0x200>;
+			interrupts = <26>, <34>;
+			interrupt-names = "dsp", "iva";
+			ti,hwmods = "mailbox";
+		};
+
 		timer1: timer@48028000 {
 			compatible = "ti,omap2420-timer";
 			reg = <0x48028000 0x400>;

arch/arm/boot/dts/omap2430.dtsi

@@ -216,6 +216,13 @@
 			dma-names = "tx", "rx";
 		};
 
+		mailbox: mailbox@48094000 {
+			compatible = "ti,omap2-mailbox";
+			reg = <0x48094000 0x200>;
+			interrupts = <26>;
+			ti,hwmods = "mailbox";
+		};
+
 		timer1: timer@49018000 {
 			compatible = "ti,omap2420-timer";
 			reg = <0x49018000 0x400>;

arch/arm/boot/dts/omap3-cm-t3x30.dtsi

@@ -10,18 +10,6 @@
 			cpu0-supply = <&vcc>;
 		};
 	};
-
-	vddvario: regulator-vddvario {
-		compatible = "regulator-fixed";
-		regulator-name = "vddvario";
-		regulator-always-on;
-	};
-
-	vdd33a: regulator-vdd33a {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
-	};
 };
 
 &omap3_pmx_core {
@@ -35,58 +23,34 @@
 
  	hsusb0_pins: pinmux_hsusb0_pins {
 		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_clk.hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_clk.hsusb0_clk */
-			OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_stp.hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_stp.hsusb0_stp */
-			OMAP3_CORE1_IOPAD(0x21a4, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
-			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
-			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data0.hsusb2_data0 */
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data0.hsusb2_data0 */
-			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
-			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
-			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data3 */
-			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data4 */
-			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data5 */
-			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data6 */
-			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
 		>;
 	};
 };
 
+#include "omap-gpmc-smsc911x.dtsi"
+
 &gpmc {
 	ranges = <5 0 0x2c000000 0x01000000>;
 
-	smsc1: ethernet@5,0 {
+	smsc1: ethernet@gpmc {
 		compatible = "smsc,lan9221", "smsc,lan9115";
 		pinctrl-names = "default";
 		pinctrl-0 = <&smsc1_pins>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 		reg = <5 0 0xff>;
-		bank-width = <2>;
-		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <186>;
-		gpmc,cs-wr-off-ns = <186>;
-		gpmc,adv-on-ns = <12>;
-		gpmc,adv-rd-off-ns = <48>;
-		gpmc,adv-wr-off-ns = <48>;
-		gpmc,oe-on-ns = <54>;
-		gpmc,oe-off-ns = <168>;
-		gpmc,we-on-ns = <54>;
-		gpmc,we-off-ns = <168>;
-		gpmc,rd-cycle-ns = <186>;
-		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <114>;
-		gpmc,page-burst-access-ns = <6>;
-		gpmc,bus-turnaround-ns = <12>;
-		gpmc,cycle2cycle-delay-ns = <18>;
-		gpmc,wr-data-mux-bus-ns = <90>;
-		gpmc,wr-access-ns = <186>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-		vddvario-supply = <&vddvario>;
-		vdd33a-supply = <&vdd33a>;
-		reg-io-width = <4>;
-		smsc,save-mac-address;
 	};
 };
 

arch/arm/boot/dts/omap3-igep.dtsi

@@ -107,7 +107,7 @@
 		>;
 	};
 
-	smsc911x_pins: pinmux_smsc911x_pins {
+	smsc9221_pins: pinmux_smsc9221_pins {
 		pinctrl-single,pins = <
 			0x1a2 (PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
 		>;

arch/arm/boot/dts/omap3-igep0020.dts

@@ -10,7 +10,7 @@
  */
 
 #include "omap3-igep.dtsi"
-#include "omap-gpmc-smsc911x.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
 
 / {
 	model = "IGEPv2 (TI OMAP AM/DM37x)";
@@ -248,7 +248,7 @@
 
 	ethernet@gpmc {
 		pinctrl-names = "default";
-		pinctrl-0 = <&smsc911x_pins>;
+		pinctrl-0 = <&smsc9221_pins>;
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;

arch/arm/boot/dts/omap3-sb-t35.dtsi

@@ -2,20 +2,6 @@
  * Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
  */
 
-/ {
-	vddvario_sb_t35: regulator-vddvario-sb-t35 {
-		compatible = "regulator-fixed";
-		regulator-name = "vddvario";
-		regulator-always-on;
-	};
-
-	vdd33a_sb_t35: regulator-vdd33a-sb-t35 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
-	};
-};
-
 &omap3_pmx_core {
 	smsc2_pins: pinmux_smsc2_pins {
 		pinctrl-single,pins = <
@@ -37,11 +23,10 @@
 		reg = <4 0 0xff>;
 		bank-width = <2>;
 		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <0>;
+		gpmc,cs-on-ns = <1>;
-		gpmc,cs-rd-off-ns = <186>;
+		gpmc,cs-rd-off-ns = <180>;
-		gpmc,cs-wr-off-ns = <186>;
+		gpmc,cs-wr-off-ns = <180>;
-		gpmc,adv-on-ns = <12>;
+		gpmc,adv-rd-off-ns = <18>;
-		gpmc,adv-rd-off-ns = <48>;
 		gpmc,adv-wr-off-ns = <48>;
 		gpmc,oe-on-ns = <54>;
 		gpmc,oe-off-ns = <168>;
@@ -49,16 +34,14 @@
 		gpmc,we-off-ns = <168>;
 		gpmc,rd-cycle-ns = <186>;
 		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <114>;
+		gpmc,access-ns = <144>;
-		gpmc,page-burst-access-ns = <6>;
+		gpmc,page-burst-access-ns = <24>;
-		gpmc,bus-turnaround-ns = <12>;
+		gpmc,bus-turnaround-ns = <90>;
-		gpmc,cycle2cycle-delay-ns = <18>;
+		gpmc,cycle2cycle-delay-ns = <90>;
-		gpmc,wr-data-mux-bus-ns = <90>;
-		gpmc,wr-access-ns = <186>;
 		gpmc,cycle2cycle-samecsen;
 		gpmc,cycle2cycle-diffcsen;
-		vddvario-supply = <&vddvario_sb_t35>;
+		vddvario-supply = <&vddvario>;
-		vdd33a-supply = <&vdd33a_sb_t35>;
+		vdd33a-supply = <&vdd33a>;
 		reg-io-width = <4>;
 		smsc,save-mac-address;
 	};

arch/arm/boot/dts/omap3-sbc-t3517.dts

@@ -8,6 +8,19 @@
 / {
 	model = "CompuLab SBC-T3517 with CM-T3517";
 	compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
+
+	/* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
+	vddvario: regulator-vddvario-sb-t35 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a-sb-t35 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
 };
 
 &omap3_pmx_core {

arch/arm/boot/dts/omap3.dtsi

@@ -61,7 +61,7 @@
 			ti,hwmods = "mpu";
 		};
 
-		iva {
+		iva: iva {
 			compatible = "ti,iva2.2";
 			ti,hwmods = "iva";
 

arch/arm/boot/dts/omap5.dtsi

@@ -630,6 +630,13 @@
 			status = "disabled";
 		};
 
+		mailbox: mailbox@4a0f4000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x4a0f4000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox";
+		};
+
 		timer1: timer@4ae18000 {
 			compatible = "ti,omap5430-timer";
 			reg = <0x4ae18000 0x80>;

arch/arm/boot/dts/sama5d3.dtsi

@@ -13,7 +13,7 @@
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
 	model = "Atmel SAMA5D3 family SoC";

arch/arm/boot/dts/sama5d3_mci2.dtsi

@@ -9,7 +9,7 @@
 
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
 	ahb {

arch/arm/boot/dts/sama5d3_tcb1.dtsi

@@ -9,7 +9,7 @@
 
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
 	aliases {

arch/arm/boot/dts/sama5d3_uart.dtsi

@@ -9,7 +9,7 @@
 
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
 	aliases {

arch/arm/boot/dts/ste-ccu8540.dts

@@ -18,6 +18,7 @@
 	compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
 
 	memory@0 {
+		device_type = "memory";
 		reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
 	};
 

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -87,7 +87,7 @@
 
 		pll4: clk@01c20018 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
+			compatible = "allwinner,sun7i-a20-pll4-clk";
 			reg = <0x01c20018 0x4>;
 			clocks = <&osc24M>;
 			clock-output-names = "pll4";
@@ -109,6 +109,14 @@
 			clock-output-names = "pll6_sata", "pll6_other", "pll6";
 		};
 
+		pll8: clk@01c20040 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-pll4-clk";
+			reg = <0x01c20040 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll8";
+		};
+
 		cpu: cpu@01c20054 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-a10-cpu-clk";
@@ -805,9 +813,9 @@
 			status = "disabled";
 		};
 
-		i2c4: i2c@01c2bc00 {
+		i2c4: i2c@01c2c000 {
 			compatible = "allwinner,sun4i-i2c";
-			reg = <0x01c2bc00 0x400>;
+			reg = <0x01c2c000 0x400>;
 			interrupts = <0 89 4>;
 			clocks = <&apb1_gates 15>;
 			clock-frequency = <100000>;

arch/arm/common/bL_switcher.c

@@ -433,8 +433,12 @@ static void bL_switcher_restore_cpus(void)
 {
 	int i;
 
-	for_each_cpu(i, &bL_switcher_removed_logical_cpus)
+	for_each_cpu(i, &bL_switcher_removed_logical_cpus) {
-		cpu_up(i);
+		struct device *cpu_dev = get_cpu_device(i);
+		int ret = device_online(cpu_dev);
+		if (ret)
+			dev_err(cpu_dev, "switcher: unable to restore CPU\n");
+	}
 }
 
 static int bL_switcher_halve_cpus(void)
@@ -521,7 +525,7 @@ static int bL_switcher_halve_cpus(void)
 			continue;
 		}
 
-		ret = cpu_down(i);
+		ret = device_offline(get_cpu_device(i));
 		if (ret) {
 			bL_switcher_restore_cpus();
 			return ret;

arch/arm/common/edma.c

@@ -1423,55 +1423,38 @@ EXPORT_SYMBOL(edma_clear_event);
 
 #if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES)
 
-static int edma_of_read_u32_to_s16_array(const struct device_node *np,
+static int edma_xbar_event_map(struct device *dev, struct device_node *node,
-					 const char *propname, s16 *out_values,
+			       struct edma_soc_info *pdata, size_t sz)
-					 size_t sz)
 {
-	int ret;
+	const char pname[] = "ti,edma-xbar-event-map";
-
-	ret = of_property_read_u16_array(np, propname, out_values, sz);
-	if (ret)
-		return ret;
-
-	/* Terminate it */
-	*out_values++ = -1;
-	*out_values++ = -1;
-
-	return 0;
-}
-
-static int edma_xbar_event_map(struct device *dev,
-			       struct device_node *node,
-			       struct edma_soc_info *pdata, int len)
-{
-	int ret, i;
 	struct resource res;
 	void __iomem *xbar;
-	const s16 (*xbar_chans)[2];
+	s16 (*xbar_chans)[2];
+	size_t nelm = sz / sizeof(s16);
 	u32 shift, offset, mux;
+	int ret, i;
 
-	xbar_chans = devm_kzalloc(dev,
+	xbar_chans = devm_kzalloc(dev, (nelm + 2) * sizeof(s16), GFP_KERNEL);
-				  len/sizeof(s16) + 2*sizeof(s16),
-				  GFP_KERNEL);
 	if (!xbar_chans)
 		return -ENOMEM;
 
 	ret = of_address_to_resource(node, 1, &res);
 	if (ret)
-		return -EIO;
+		return -ENOMEM;
 
 	xbar = devm_ioremap(dev, res.start, resource_size(&res));
 	if (!xbar)
 		return -ENOMEM;
 
-	ret = edma_of_read_u32_to_s16_array(node,
+	ret = of_property_read_u16_array(node, pname, (u16 *)xbar_chans, nelm);
-					    "ti,edma-xbar-event-map",
-					    (s16 *)xbar_chans,
-					    len/sizeof(u32));
 	if (ret)
 		return -EIO;
 
-	for (i = 0; xbar_chans[i][0] != -1; i++) {
+	/* Invalidate last entry for the other user of this mess */
+	nelm >>= 1;
+	xbar_chans[nelm][0] = xbar_chans[nelm][1] = -1;
+
+	for (i = 0; i < nelm; i++) {
 		shift = (xbar_chans[i][1] & 0x03) << 3;
 		offset = xbar_chans[i][1] & 0xfffffffc;
 		mux = readl(xbar + offset);
@@ -1480,8 +1463,7 @@ static int edma_xbar_event_map(struct device *dev,
 		writel(mux, (xbar + offset));
 	}
 
-	pdata->xbar_chans = xbar_chans;
+	pdata->xbar_chans = (const s16 (*)[2]) xbar_chans;
-
 	return 0;
 }
 

arch/arm/configs/exynos_defconfig

@@ -65,6 +65,7 @@ CONFIG_TCG_TIS_I2C_INFINEON=y
 CONFIG_I2C=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_ARB_GPIO_CHALLENGE=y
+CONFIG_I2C_EXYNOS5=y
 CONFIG_I2C_S3C2410=y
 CONFIG_DEBUG_GPIO=y
 # CONFIG_HWMON is not set

arch/arm/configs/sunxi_defconfig

@@ -37,7 +37,7 @@ CONFIG_SUN4I_EMAC=y
 # CONFIG_NET_VENDOR_NATSEMI is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_STMMAC_ETH=y
 # CONFIG_NET_VENDOR_WIZNET is not set
 # CONFIG_WLAN is not set
 CONFIG_SERIAL_8250=y

arch/arm/include/asm/trusted_foundations.h

@@ -54,7 +54,9 @@ static inline void register_trusted_foundations(
 	 */
 	pr_err("No support for Trusted Foundations, continuing in degraded mode.\n");
 	pr_err("Secondary processors as well as CPU PM will be disabled.\n");
+#if IS_ENABLED(CONFIG_SMP)
 	setup_max_cpus = 0;
+#endif
 	cpu_idle_poll_ctrl(true);
 }
 

arch/arm/include/asm/uaccess.h

@@ -171,8 +171,9 @@ extern int __put_user_8(void *, unsigned long long);
 #define __put_user_check(x,p)							\
 	({								\
 		unsigned long __limit = current_thread_info()->addr_limit - 1; \
+		const typeof(*(p)) __user *__tmp_p = (p);		\
 		register const typeof(*(p)) __r2 asm("r2") = (x);	\
-		register const typeof(*(p)) __user *__p asm("r0") = (p);\
+		register const typeof(*(p)) __user *__p asm("r0") = __tmp_p; \
 		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
 		switch (sizeof(*(__p))) {				\

arch/arm/include/asm/xen/page.h

@@ -77,7 +77,6 @@ static inline xpaddr_t machine_to_phys(xmaddr_t machine)
 }
 /* VIRT <-> MACHINE conversion */
 #define virt_to_machine(v)	(phys_to_machine(XPADDR(__pa(v))))
-#define virt_to_pfn(v)          (PFN_DOWN(__pa(v)))
 #define virt_to_mfn(v)		(pfn_to_mfn(virt_to_pfn(v)))
 #define mfn_to_virt(m)		(__va(mfn_to_pfn(m) << PAGE_SHIFT))
 

arch/arm/kernel/entry-header.S

@@ -132,6 +132,10 @@
 	orrne	r5, V7M_xPSR_FRAMEPTRALIGN
 	biceq	r5, V7M_xPSR_FRAMEPTRALIGN
 
+	@ ensure bit 0 is cleared in the PC, otherwise behaviour is
+	@ unpredictable
+	bic	r4, #1
+
 	@ write basic exception frame
 	stmdb	r2!, {r1, r3-r5}
 	ldmia	sp, {r1, r3-r5}

arch/arm/kernel/unwind.c

@@ -285,7 +285,7 @@ static int unwind_exec_pop_r4_to_rN(struct unwind_ctrl_block *ctrl,
 		if (unwind_pop_register(ctrl, &vsp, reg))
 				return -URC_FAILURE;
 
-	if (insn & 0x80)
+	if (insn & 0x8)
 		if (unwind_pop_register(ctrl, &vsp, 14))
 				return -URC_FAILURE;
 

arch/arm/mach-at91/at91sam9260_devices.c

@@ -1308,19 +1308,19 @@ static struct platform_device at91_adc_device = {
 static struct at91_adc_trigger at91_adc_triggers[] = {
 	[0] = {
 		.name = "timer-counter-0",
-		.value = AT91_ADC_TRGSEL_TC0 | AT91_ADC_TRGEN,
+		.value = 0x1,
 	},
 	[1] = {
 		.name = "timer-counter-1",
-		.value = AT91_ADC_TRGSEL_TC1 | AT91_ADC_TRGEN,
+		.value = 0x3,
 	},
 	[2] = {
 		.name = "timer-counter-2",
-		.value = AT91_ADC_TRGSEL_TC2 | AT91_ADC_TRGEN,
+		.value = 0x5,
 	},
 	[3] = {
 		.name = "external",
-		.value = AT91_ADC_TRGSEL_EXTERNAL | AT91_ADC_TRGEN,
+		.value = 0xd,
 		.is_external = true,
 	},
 };

arch/arm/mach-exynos/firmware.c

@@ -18,6 +18,8 @@
 
 #include <mach/map.h>
 
+#include <plat/cpu.h>
+
 #include "smc.h"
 
 static int exynos_do_idle(void)
@@ -28,13 +30,24 @@ static int exynos_do_idle(void)
 
 static int exynos_cpu_boot(int cpu)
 {
+	/*
+	 * The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
+	 * But, Exynos4212 has only one secondary CPU so second parameter
+	 * isn't used for informing secure firmware about CPU id.
+	 */
+	if (soc_is_exynos4212())
+		cpu = 0;
+
 	exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
 	return 0;
 }
 
 static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
 {
-	void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c + 4*cpu;
+	void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c;
+
+	if (!soc_is_exynos4212())
+		boot_reg += 4*cpu;
 
 	__raw_writel(boot_addr, boot_reg);
 	return 0;

arch/arm/mach-imx/devices/platform-ipu-core.c

@@ -77,7 +77,7 @@ struct platform_device *__init imx_alloc_mx3_camera(
 
 	pdev = platform_device_alloc("mx3-camera", 0);
 	if (!pdev)
-		goto err;
+		return ERR_PTR(-ENOMEM);
 
 	pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
 	if (!pdev->dev.dma_mask)

arch/arm/mach-mvebu/mvebu-soc-id.c

@@ -108,7 +108,18 @@ static int __init mvebu_soc_id_init(void)
 	iounmap(pci_base);
 
 res_ioremap:
-	clk_disable_unprepare(clk);
+	/*
+	 * If the PCIe unit is actually enabled and we have PCI
+	 * support in the kernel, we intentionally do not release the
+	 * reference to the clock. We want to keep it running since
+	 * the bootloader does some PCIe link configuration that the
+	 * kernel is for now unable to do, and gating the clock would
+	 * make us loose this precious configuration.
+	 */
+	if (!of_device_is_available(child) || !IS_ENABLED(CONFIG_PCI_MVEBU)) {
+		clk_disable_unprepare(clk);
+		clk_put(clk);
+	}
 
 clk_err:
 	of_node_put(child);

arch/arm/mach-omap2/board-flash.c

@@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
 	board_nand_data.nr_parts	= nr_parts;
 	board_nand_data.devsize		= nand_type;
 
-	board_nand_data.ecc_opt = OMAP_ECC_BCH8_CODE_HW;
+	board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_HW;
 	gpmc_nand_init(&board_nand_data, gpmc_t);
 }
 #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */

arch/arm/mach-omap2/cclock3xxx_data.c

@@ -456,7 +456,8 @@ static struct clk_hw_omap dpll4_m5x2_ck_hw = {
 	.clkdm_name	= "dpll4_clkdm",
 };
 
-DEFINE_STRUCT_CLK(dpll4_m5x2_ck, dpll4_m5x2_ck_parent_names, dpll4_m5x2_ck_ops);
+DEFINE_STRUCT_CLK_FLAGS(dpll4_m5x2_ck, dpll4_m5x2_ck_parent_names,
+			dpll4_m5x2_ck_ops, CLK_SET_RATE_PARENT);
 
 static struct clk dpll4_m5x2_ck_3630 = {
 	.name		= "dpll4_m5x2_ck",

arch/arm/mach-omap2/cpuidle44xx.c

@@ -14,6 +14,7 @@
 #include <linux/cpuidle.h>
 #include <linux/cpu_pm.h>
 #include <linux/export.h>
+#include <linux/clockchips.h>
 
 #include <asm/cpuidle.h>
 #include <asm/proc-fns.h>
@@ -83,6 +84,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 {
 	struct idle_statedata *cx = state_ptr + index;
 	u32 mpuss_can_lose_context = 0;
+	int cpu_id = smp_processor_id();
 
 	/*
 	 * CPU0 has to wait and stay ON until CPU1 is OFF state.
@@ -110,6 +112,8 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 	mpuss_can_lose_context = (cx->mpu_state == PWRDM_POWER_RET) &&
 				 (cx->mpu_logic_state == PWRDM_POWER_OFF);
 
+	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id);
+
 	/*
 	 * Call idle CPU PM enter notifier chain so that
 	 * VFP and per CPU interrupt context is saved.
@@ -165,6 +169,8 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 	if (dev->cpu == 0 && mpuss_can_lose_context)
 		cpu_cluster_pm_exit();
 
+	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id);
+
 fail:
 	cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
 	cpu_done[dev->cpu] = false;
@@ -172,6 +178,16 @@ fail:
 	return index;
 }
 
+/*
+ * For each cpu, setup the broadcast timer because local timers
+ * stops for the states above C1.
+ */
+static void omap_setup_broadcast_timer(void *arg)
+{
+	int cpu = smp_processor_id();
+	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu);
+}
+
 static struct cpuidle_driver omap4_idle_driver = {
 	.name				= "omap4_idle",
 	.owner				= THIS_MODULE,
@@ -189,8 +205,7 @@ static struct cpuidle_driver omap4_idle_driver = {
 			/* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */
 			.exit_latency = 328 + 440,
 			.target_residency = 960,
-			.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED |
+			.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
-			         CPUIDLE_FLAG_TIMER_STOP,
 			.enter = omap_enter_idle_coupled,
 			.name = "C2",
 			.desc = "CPUx OFF, MPUSS CSWR",
@@ -199,8 +214,7 @@ static struct cpuidle_driver omap4_idle_driver = {
 			/* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
 			.exit_latency = 460 + 518,
 			.target_residency = 1100,
-			.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED |
+			.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
-			         CPUIDLE_FLAG_TIMER_STOP,
 			.enter = omap_enter_idle_coupled,
 			.name = "C3",
 			.desc = "CPUx OFF, MPUSS OSWR",
@@ -231,5 +245,8 @@ int __init omap4_idle_init(void)
 	if (!cpu_clkdm[0] || !cpu_clkdm[1])
 		return -ENODEV;
 
+	/* Configure the broadcast timer on each cpu */
+	on_each_cpu(omap_setup_broadcast_timer, NULL, 1);
+
 	return cpuidle_register(&omap4_idle_driver, cpu_online_mask);
 }

arch/arm/mach-omap2/omap-headsmp.S

@@ -1,7 +1,7 @@
 /*
  * Secondary CPU startup routine source file.
  *
- * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2009-2014 Texas Instruments, Inc.
  *
  * Author:
  *      Santosh Shilimkar <santosh.shilimkar@ti.com>
@@ -28,9 +28,13 @@
  * code.  This routine also provides a holding flag into which
  * secondary core is held until we're ready for it to initialise.
  * The primary core will update this flag using a hardware
-+ * register AuxCoreBoot0.
+ * register AuxCoreBoot0.
  */
 ENTRY(omap5_secondary_startup)
+.arm
+THUMB( adr     r9, BSYM(wait)  )       @ CPU may be entered in ARM mode.
+THUMB( bx      r9              )       @ If this is a Thumb-2 kernel,
+THUMB( .thumb                  )       @ switch to Thumb now.
 wait:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
 	ldr	r0, [r2]
 	mov	r0, r0, lsr #5

arch/arm/mach-omap2/omap_hwmod_54xx_data.c

@@ -895,7 +895,7 @@ static struct omap_hwmod omap54xx_mcpdm_hwmod = {
 	 * current exception.
 	 */
 
-	.flags		= HWMOD_EXT_OPT_MAIN_CLK,
+	.flags		= HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE,
 	.main_clk	= "pad_clks_ck",
 	.prcm = {
 		.omap4 = {

arch/arm/mach-orion5x/common.h

@@ -21,7 +21,7 @@ struct mv_sata_platform_data;
 #define ORION_MBUS_DEVBUS_BOOT_ATTR   0x0f
 #define ORION_MBUS_DEVBUS_TARGET(cs)  0x01
 #define ORION_MBUS_DEVBUS_ATTR(cs)    (~(1 << cs))
-#define ORION_MBUS_SRAM_TARGET        0x00
+#define ORION_MBUS_SRAM_TARGET        0x09
 #define ORION_MBUS_SRAM_ATTR          0x00
 
 /*

arch/arm/mm/proc-v7m.S

@@ -123,6 +123,11 @@ __v7m_setup:
 	mov	pc, lr
 ENDPROC(__v7m_setup)
 
+	.align 2
+__v7m_setup_stack:
+	.space	4 * 8				@ 8 registers
+__v7m_setup_stack_top:
+
 	define_processor_functions v7m, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1
 
 	.section ".rodata"
@@ -152,6 +157,3 @@ __v7m_proc_info:
 	.long	nop_cache_fns		@ proc_info_list.cache
 	.size	__v7m_proc_info, . - __v7m_proc_info
 
-__v7m_setup_stack:
-	.space	4 * 8				@ 8 registers
-__v7m_setup_stack_top:

arch/arm/plat-omap/dma.c

@@ -70,6 +70,7 @@ static u32 errata;
 
 static struct omap_dma_global_context_registers {
 	u32 dma_irqenable_l0;
+	u32 dma_irqenable_l1;
 	u32 dma_ocp_sysconfig;
 	u32 dma_gcr;
 } omap_dma_global_context;
@@ -1973,10 +1974,17 @@ static struct irqaction omap24xx_dma_irq;
 
 /*----------------------------------------------------------------------------*/
 
+/*
+ * Note that we are currently using only IRQENABLE_L0 and L1.
+ * As the DSP may be using IRQENABLE_L2 and L3, let's not
+ * touch those for now.
+ */
 void omap_dma_global_context_save(void)
 {
 	omap_dma_global_context.dma_irqenable_l0 =
 		p->dma_read(IRQENABLE_L0, 0);
+	omap_dma_global_context.dma_irqenable_l1 =
+		p->dma_read(IRQENABLE_L1, 0);
 	omap_dma_global_context.dma_ocp_sysconfig =
 		p->dma_read(OCP_SYSCONFIG, 0);
 	omap_dma_global_context.dma_gcr = p->dma_read(GCR, 0);
@@ -1991,6 +1999,8 @@ void omap_dma_global_context_restore(void)
 		OCP_SYSCONFIG, 0);
 	p->dma_write(omap_dma_global_context.dma_irqenable_l0,
 		IRQENABLE_L0, 0);
+	p->dma_write(omap_dma_global_context.dma_irqenable_l1,
+		IRQENABLE_L1, 0);
 
 	if (IS_DMA_ERRATA(DMA_ROMCODE_BUG))
 		p->dma_write(0x3 , IRQSTATUS_L0, 0);

arch/arm64/include/asm/memory.h

@@ -138,6 +138,7 @@ static inline void *phys_to_virt(phys_addr_t x)
 #define __pa(x)			__virt_to_phys((unsigned long)(x))
 #define __va(x)			((void *)__phys_to_virt((phys_addr_t)(x)))
 #define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+#define virt_to_pfn(x)      __phys_to_pfn(__virt_to_phys(x))
 
 /*
  *  virt_to_page(k)	convert a _valid_ virtual address to struct page *

arch/arm64/include/asm/pgtable.h

@@ -266,7 +266,7 @@ static inline pmd_t pte_pmd(pte_t pte)
 
 #define pmd_page(pmd)           pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK))
 
-#define set_pmd_at(mm, addr, pmdp, pmd)	set_pmd(pmdp, pmd)
+#define set_pmd_at(mm, addr, pmdp, pmd)	set_pte_at(mm, addr, (pte_t *)pmdp, pmd_pte(pmd))
 
 static inline int has_transparent_hugepage(void)
 {

arch/arm64/kernel/irq.c

@@ -97,11 +97,15 @@ static bool migrate_one_irq(struct irq_desc *desc)
 	if (irqd_is_per_cpu(d) || !cpumask_test_cpu(smp_processor_id(), affinity))
 		return false;
 
-	if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
+	if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids)
-		affinity = cpu_online_mask;
 		ret = true;
-	}
 
+	/*
+	 * when using forced irq_set_affinity we must ensure that the cpu
+	 * being offlined is not present in the affinity mask, it may be
+	 * selected as the target CPU otherwise
+	 */
+	affinity = cpu_online_mask;
 	c = irq_data_get_irq_chip(d);
 	if (!c->irq_set_affinity)
 		pr_debug("IRQ%u: unable to set affinity\n", d->irq);

arch/arm64/mm/hugetlbpage.c

@@ -51,7 +51,11 @@ int pmd_huge(pmd_t pmd)
 
 int pud_huge(pud_t pud)
 {
+#ifndef __PAGETABLE_PMD_FOLDED
 	return !(pud_val(pud) & PUD_TABLE_BIT);
+#else
+	return 0;
+#endif
 }
 
 int pmd_huge_support(void)

arch/ia64/include/asm/unistd.h

@@ -11,7 +11,7 @@
 
 
 
-#define NR_syscalls			314 /* length of syscall table */
+#define NR_syscalls			315 /* length of syscall table */
 
 /*
  * The following defines stop scripts/checksyscalls.sh from complaining about

arch/ia64/include/uapi/asm/unistd.h

@@ -327,5 +327,6 @@
 #define __NR_finit_module		1335
 #define __NR_sched_setattr		1336
 #define __NR_sched_getattr		1337
+#define __NR_renameat2			1338
 
 #endif /* _UAPI_ASM_IA64_UNISTD_H */

arch/ia64/kernel/entry.S

@@ -1775,6 +1775,7 @@ sys_call_table:
 	data8 sys_finit_module			// 1335
 	data8 sys_sched_setattr
 	data8 sys_sched_getattr
+	data8 sys_renameat2
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
 #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */

arch/m68k/include/asm/unistd.h

@@ -4,7 +4,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define NR_syscalls		351
+#define NR_syscalls		352
 
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_OLD_STAT

arch/m68k/include/uapi/asm/unistd.h

@@ -356,5 +356,6 @@
 #define __NR_finit_module	348
 #define __NR_sched_setattr	349
 #define __NR_sched_getattr	350
+#define __NR_renameat2		351
 
 #endif /* _UAPI_ASM_M68K_UNISTD_H_ */

arch/m68k/kernel/syscalltable.S

@@ -371,4 +371,5 @@ ENTRY(sys_call_table)
 	.long sys_finit_module
 	.long sys_sched_setattr
 	.long sys_sched_getattr		/* 350 */
+	.long sys_renameat2
 

arch/metag/include/asm/barrier.h

@@ -15,6 +15,7 @@ static inline void wr_fence(void)
 	volatile int *flushptr = (volatile int *) LINSYSEVENT_WR_FENCE;
 	barrier();
 	*flushptr = 0;
+	barrier();
 }
 
 #else /* CONFIG_METAG_META21 */
@@ -35,6 +36,7 @@ static inline void wr_fence(void)
 	*flushptr = 0;
 	*flushptr = 0;
 	*flushptr = 0;
+	barrier();
 }
 
 #endif /* !CONFIG_METAG_META21 */
@@ -68,6 +70,7 @@ static inline void fence(void)
 	volatile int *flushptr = (volatile int *) LINSYSEVENT_WR_ATOMIC_UNLOCK;
 	barrier();
 	*flushptr = 0;
+	barrier();
 }
 #define smp_mb()        fence()
 #define smp_rmb()       fence()

arch/metag/include/asm/processor.h

@@ -22,6 +22,8 @@
 /* Add an extra page of padding at the top of the stack for the guard page. */
 #define STACK_TOP	(TASK_SIZE - PAGE_SIZE)
 #define STACK_TOP_MAX	STACK_TOP
+/* Maximum virtual space for stack */
+#define STACK_SIZE_MAX	(CONFIG_MAX_STACK_SIZE_MB*1024*1024)
 
 /* This decides where the kernel will search for a free chunk of vm
  * space during mmap's.

arch/metag/include/uapi/asm/Kbuild

@@ -4,11 +4,11 @@ include include/uapi/asm-generic/Kbuild.asm
 header-y += byteorder.h
 header-y += ech.h
 header-y += ptrace.h
-header-y += resource.h
 header-y += sigcontext.h
 header-y += siginfo.h
 header-y += swab.h
 header-y += unistd.h
 
 generic-y += mman.h
+generic-y += resource.h
 generic-y += setup.h

arch/metag/include/uapi/asm/resource.h

@@ -1,7 +0,0 @@
-#ifndef _UAPI_METAG_RESOURCE_H
-#define _UAPI_METAG_RESOURCE_H
-
-#define _STK_LIM_MAX    (1 << 28)
-#include <asm-generic/resource.h>
-
-#endif /* _UAPI_METAG_RESOURCE_H */

arch/mips/Makefile

@@ -151,7 +151,7 @@ cflags-$(CONFIG_CPU_NEVADA)	+= $(call cc-option,-march=rm5200,-march=r5000) \
 			-Wa,--trap
 cflags-$(CONFIG_CPU_RM7000)	+= $(call cc-option,-march=rm7000,-march=r5000) \
 			-Wa,--trap
-cflags-$(CONFIG_CPU_SB1)	+= $(call cc-option,-march=sb1,-march=r5000) \
+cflags-$(CONFIG_CPU_SB1)	+= $(call cc-option,-march=sb1 -mno-mdmx -mno-mips3d,-march=r5000) \
 			-Wa,--trap
 cflags-$(CONFIG_CPU_R8000)	+= -march=r8000 -Wa,--trap
 cflags-$(CONFIG_CPU_R10000)	+= $(call cc-option,-march=r10000,-march=r8000) \

arch/mips/dec/ecc-berr.c

@@ -21,6 +21,7 @@
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
 #include <asm/cpu.h>
+#include <asm/cpu-type.h>
 #include <asm/irq_regs.h>
 #include <asm/processor.h>
 #include <asm/ptrace.h>

arch/mips/dec/kn02xa-berr.c

@@ -19,6 +19,7 @@
 #include <linux/types.h>
 
 #include <asm/addrspace.h>
+#include <asm/cpu-type.h>
 #include <asm/irq_regs.h>
 #include <asm/ptrace.h>
 #include <asm/traps.h>

arch/mips/dec/prom/Makefile

@@ -6,4 +6,3 @@
 lib-y			+= init.o memory.o cmdline.o identify.o console.o
 
 lib-$(CONFIG_32BIT)	+= locore.o
-lib-$(CONFIG_64BIT)	+= call_o32.o

arch/mips/dec/prom/call_o32.S

@@ -1,89 +0,0 @@
-/*
- *	O32 interface for the 64 (or N32) ABI.
- *
- *	Copyright (C) 2002  Maciej W. Rozycki
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- */
-
-#include <asm/asm.h>
-#include <asm/regdef.h>
-
-/* Maximum number of arguments supported.  Must be even!  */
-#define O32_ARGC	32
-/* Number of static registers we save.  */
-#define O32_STATC	11
-/* Frame size for both of the above.  */
-#define O32_FRAMESZ	(4 * O32_ARGC + SZREG * O32_STATC)
-
-		.text
-
-/*
- * O32 function call dispatcher, for interfacing 32-bit ROM routines.
- *
- * The standard 64 (N32) calling sequence is supported, with a0
- * holding a function pointer, a1-a7 -- its first seven arguments
- * and the stack -- remaining ones (up to O32_ARGC, including a1-a7).
- * Static registers, gp and fp are preserved, v0 holds a result.
- * This code relies on the called o32 function for sp and ra
- * restoration and thus both this dispatcher and the current stack
- * have to be placed in a KSEGx (or KUSEG) address space.  Any
- * pointers passed have to point to addresses within one of these
- * spaces as well.
- */
-NESTED(call_o32, O32_FRAMESZ, ra)
-		REG_SUBU	sp,O32_FRAMESZ
-
-		REG_S		ra,O32_FRAMESZ-1*SZREG(sp)
-		REG_S		fp,O32_FRAMESZ-2*SZREG(sp)
-		REG_S		gp,O32_FRAMESZ-3*SZREG(sp)
-		REG_S		s7,O32_FRAMESZ-4*SZREG(sp)
-		REG_S		s6,O32_FRAMESZ-5*SZREG(sp)
-		REG_S		s5,O32_FRAMESZ-6*SZREG(sp)
-		REG_S		s4,O32_FRAMESZ-7*SZREG(sp)
-		REG_S		s3,O32_FRAMESZ-8*SZREG(sp)
-		REG_S		s2,O32_FRAMESZ-9*SZREG(sp)
-		REG_S		s1,O32_FRAMESZ-10*SZREG(sp)
-		REG_S		s0,O32_FRAMESZ-11*SZREG(sp)
-
-		move		jp,a0
-
-		sll		a0,a1,zero
-		sll		a1,a2,zero
-		sll		a2,a3,zero
-		sll		a3,a4,zero
-		sw		a5,0x10(sp)
-		sw		a6,0x14(sp)
-		sw		a7,0x18(sp)
-
-		PTR_LA		t0,O32_FRAMESZ(sp)
-		PTR_LA		t1,0x1c(sp)
-		li		t2,O32_ARGC-7
-1:
-		lw		t3,(t0)
-		REG_ADDU	t0,SZREG
-		sw		t3,(t1)
-		REG_SUBU	t2,1
-		REG_ADDU	t1,4
-		bnez		t2,1b
-
-		jalr		jp
-
-		REG_L		s0,O32_FRAMESZ-11*SZREG(sp)
-		REG_L		s1,O32_FRAMESZ-10*SZREG(sp)
-		REG_L		s2,O32_FRAMESZ-9*SZREG(sp)
-		REG_L		s3,O32_FRAMESZ-8*SZREG(sp)
-		REG_L		s4,O32_FRAMESZ-7*SZREG(sp)
-		REG_L		s5,O32_FRAMESZ-6*SZREG(sp)
-		REG_L		s6,O32_FRAMESZ-5*SZREG(sp)
-		REG_L		s7,O32_FRAMESZ-4*SZREG(sp)
-		REG_L		gp,O32_FRAMESZ-3*SZREG(sp)
-		REG_L		fp,O32_FRAMESZ-2*SZREG(sp)
-		REG_L		ra,O32_FRAMESZ-1*SZREG(sp)
-
-		REG_ADDU	sp,O32_FRAMESZ
-		jr		ra
-END(call_o32)