MIPS: Netlogic: Add support for USB on XLP2xx
Add USB intialization code to handle the new XLP2XX USB 3.0 block. This adds xlp/usb-init-xlp2.c to initialize the XLP2XX USB glue-logic for XHCI and EHCI. Interrupt and IO offset code in xlp-hal/iomap.h and xlp/nlm_hal.c is also updated for the new USB block. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5744/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Ganesan Ramalingam
Ralf Baechle
parent
e5be1fd007
commit
9eac3591e7
6 changed files with 270 additions and 20 deletions
|
|
@ -72,6 +72,12 @@
|
|||
#define XLP_IO_USB_OHCI2_OFFSET(node) XLP_HDR_OFFSET(node, 0, 2, 4)
|
||||
#define XLP_IO_USB_OHCI3_OFFSET(node) XLP_HDR_OFFSET(node, 0, 2, 5)
|
||||
|
||||
/* XLP2xx has an updated USB block */
|
||||
#define XLP2XX_IO_USB_OFFSET(node, i) XLP_HDR_OFFSET(node, 0, 4, i)
|
||||
#define XLP2XX_IO_USB_XHCI0_OFFSET(node) XLP_HDR_OFFSET(node, 0, 4, 1)
|
||||
#define XLP2XX_IO_USB_XHCI1_OFFSET(node) XLP_HDR_OFFSET(node, 0, 4, 2)
|
||||
#define XLP2XX_IO_USB_XHCI2_OFFSET(node) XLP_HDR_OFFSET(node, 0, 4, 3)
|
||||
|
||||
#define XLP_IO_NAE_OFFSET(node) XLP_HDR_OFFSET(node, 0, 3, 0)
|
||||
#define XLP_IO_POE_OFFSET(node) XLP_HDR_OFFSET(node, 0, 3, 1)
|
||||
|
||||
|
|
@ -148,6 +154,7 @@
|
|||
#define PCI_DEVICE_ID_NLM_NOR 0x1015
|
||||
#define PCI_DEVICE_ID_NLM_NAND 0x1016
|
||||
#define PCI_DEVICE_ID_NLM_MMC 0x1018
|
||||
#define PCI_DEVICE_ID_NLM_XHCI 0x101d
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
|
|
|
|||
|
|
@ -41,12 +41,17 @@
|
|||
#define PIC_PCIE_LINK_1_IRQ 20
|
||||
#define PIC_PCIE_LINK_2_IRQ 21
|
||||
#define PIC_PCIE_LINK_3_IRQ 22
|
||||
|
||||
#define PIC_EHCI_0_IRQ 23
|
||||
#define PIC_EHCI_1_IRQ 24
|
||||
#define PIC_OHCI_0_IRQ 25
|
||||
#define PIC_OHCI_1_IRQ 26
|
||||
#define PIC_OHCI_2_IRQ 27
|
||||
#define PIC_OHCI_3_IRQ 28
|
||||
#define PIC_2XX_XHCI_0_IRQ 23
|
||||
#define PIC_2XX_XHCI_1_IRQ 24
|
||||
#define PIC_2XX_XHCI_2_IRQ 25
|
||||
|
||||
#define PIC_MMC_IRQ 29
|
||||
#define PIC_I2C_0_IRQ 30
|
||||
#define PIC_I2C_1_IRQ 31
|
||||
|
|
|
|||
|
|
@ -1,3 +1,4 @@
|
|||
obj-y += setup.o nlm_hal.o cop2-ex.o dt.o
|
||||
obj-$(CONFIG_SMP) += wakeup.o
|
||||
obj-$(CONFIG_USB) += usb-init.o
|
||||
obj-$(CONFIG_USB) += usb-init-xlp2.o
|
||||
|
|
|
|||
|
|
@ -65,6 +65,7 @@ int nlm_irq_to_irt(int irq)
|
|||
uint64_t pcibase;
|
||||
int devoff, irt;
|
||||
|
||||
devoff = 0;
|
||||
switch (irq) {
|
||||
case PIC_UART_0_IRQ:
|
||||
devoff = XLP_IO_UART0_OFFSET(0);
|
||||
|
|
@ -72,6 +73,34 @@ int nlm_irq_to_irt(int irq)
|
|||
case PIC_UART_1_IRQ:
|
||||
devoff = XLP_IO_UART1_OFFSET(0);
|
||||
break;
|
||||
case PIC_MMC_IRQ:
|
||||
devoff = XLP_IO_SD_OFFSET(0);
|
||||
break;
|
||||
case PIC_I2C_0_IRQ: /* I2C will be fixed up */
|
||||
case PIC_I2C_1_IRQ:
|
||||
case PIC_I2C_2_IRQ:
|
||||
case PIC_I2C_3_IRQ:
|
||||
if (cpu_is_xlpii())
|
||||
devoff = XLP2XX_IO_I2C_OFFSET(0);
|
||||
else
|
||||
devoff = XLP_IO_I2C0_OFFSET(0);
|
||||
break;
|
||||
default:
|
||||
if (cpu_is_xlpii()) {
|
||||
switch (irq) {
|
||||
/* XLP2XX has three XHCI USB controller */
|
||||
case PIC_2XX_XHCI_0_IRQ:
|
||||
devoff = XLP2XX_IO_USB_XHCI0_OFFSET(0);
|
||||
break;
|
||||
case PIC_2XX_XHCI_1_IRQ:
|
||||
devoff = XLP2XX_IO_USB_XHCI1_OFFSET(0);
|
||||
break;
|
||||
case PIC_2XX_XHCI_2_IRQ:
|
||||
devoff = XLP2XX_IO_USB_XHCI2_OFFSET(0);
|
||||
break;
|
||||
}
|
||||
} else {
|
||||
switch (irq) {
|
||||
case PIC_EHCI_0_IRQ:
|
||||
devoff = XLP_IO_USB_EHCI0_OFFSET(0);
|
||||
break;
|
||||
|
|
@ -90,21 +119,8 @@ int nlm_irq_to_irt(int irq)
|
|||
case PIC_OHCI_3_IRQ:
|
||||
devoff = XLP_IO_USB_OHCI3_OFFSET(0);
|
||||
break;
|
||||
case PIC_MMC_IRQ:
|
||||
devoff = XLP_IO_SD_OFFSET(0);
|
||||
break;
|
||||
case PIC_I2C_0_IRQ: /* I2C will be fixed up */
|
||||
case PIC_I2C_1_IRQ:
|
||||
case PIC_I2C_2_IRQ:
|
||||
case PIC_I2C_3_IRQ:
|
||||
if (cpu_is_xlpii())
|
||||
devoff = XLP2XX_IO_I2C_OFFSET(0);
|
||||
else
|
||||
devoff = XLP_IO_I2C0_OFFSET(0);
|
||||
break;
|
||||
default:
|
||||
devoff = 0;
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
if (devoff != 0) {
|
||||
|
|
|
|||
218
arch/mips/netlogic/xlp/usb-init-xlp2.c
Normal file
218
arch/mips/netlogic/xlp/usb-init-xlp2.c
Normal file
|
|
@ -0,0 +1,218 @@
|
|||
/*
|
||||
* Copyright (c) 2003-2013 Broadcom Corporation
|
||||
* All Rights Reserved
|
||||
*
|
||||
* This software is available to you under a choice of one of two
|
||||
* licenses. You may choose to be licensed under the terms of the GNU
|
||||
* General Public License (GPL) Version 2, available from the file
|
||||
* COPYING in the main directory of this source tree, or the Broadcom
|
||||
* license below:
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
|
||||
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
|
||||
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
#include <linux/dma-mapping.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/irq.h>
|
||||
|
||||
#include <asm/netlogic/common.h>
|
||||
#include <asm/netlogic/haldefs.h>
|
||||
#include <asm/netlogic/xlp-hal/iomap.h>
|
||||
#include <asm/netlogic/xlp-hal/xlp.h>
|
||||
|
||||
#define XLPII_USB3_CTL_0 0xc0
|
||||
#define XLPII_VAUXRST BIT(0)
|
||||
#define XLPII_VCCRST BIT(1)
|
||||
#define XLPII_NUM2PORT 9
|
||||
#define XLPII_NUM3PORT 13
|
||||
#define XLPII_RTUNEREQ BIT(20)
|
||||
#define XLPII_MS_CSYSREQ BIT(21)
|
||||
#define XLPII_XS_CSYSREQ BIT(22)
|
||||
#define XLPII_RETENABLEN BIT(23)
|
||||
#define XLPII_TX2RX BIT(24)
|
||||
#define XLPII_XHCIREV BIT(25)
|
||||
#define XLPII_ECCDIS BIT(26)
|
||||
|
||||
#define XLPII_USB3_INT_REG 0xc2
|
||||
#define XLPII_USB3_INT_MASK 0xc3
|
||||
|
||||
#define XLPII_USB_PHY_TEST 0xc6
|
||||
#define XLPII_PRESET BIT(0)
|
||||
#define XLPII_ATERESET BIT(1)
|
||||
#define XLPII_LOOPEN BIT(2)
|
||||
#define XLPII_TESTPDHSP BIT(3)
|
||||
#define XLPII_TESTPDSSP BIT(4)
|
||||
#define XLPII_TESTBURNIN BIT(5)
|
||||
|
||||
#define XLPII_USB_PHY_LOS_LV 0xc9
|
||||
#define XLPII_LOSLEV 0
|
||||
#define XLPII_LOSBIAS 5
|
||||
#define XLPII_SQRXTX 8
|
||||
#define XLPII_TXBOOST 11
|
||||
#define XLPII_RSLKSEL 16
|
||||
#define XLPII_FSEL 20
|
||||
|
||||
#define XLPII_USB_RFCLK_REG 0xcc
|
||||
#define XLPII_VVLD 30
|
||||
|
||||
#define nlm_read_usb_reg(b, r) nlm_read_reg(b, r)
|
||||
#define nlm_write_usb_reg(b, r, v) nlm_write_reg(b, r, v)
|
||||
|
||||
#define nlm_xlpii_get_usb_pcibase(node, inst) \
|
||||
nlm_pcicfg_base(XLP2XX_IO_USB_OFFSET(node, inst))
|
||||
#define nlm_xlpii_get_usb_regbase(node, inst) \
|
||||
(nlm_xlpii_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
|
||||
|
||||
static void xlpii_usb_ack(struct irq_data *data)
|
||||
{
|
||||
u64 port_addr;
|
||||
|
||||
switch (data->irq) {
|
||||
case PIC_2XX_XHCI_0_IRQ:
|
||||
port_addr = nlm_xlpii_get_usb_regbase(0, 1);
|
||||
break;
|
||||
case PIC_2XX_XHCI_1_IRQ:
|
||||
port_addr = nlm_xlpii_get_usb_regbase(0, 2);
|
||||
break;
|
||||
case PIC_2XX_XHCI_2_IRQ:
|
||||
port_addr = nlm_xlpii_get_usb_regbase(0, 3);
|
||||
break;
|
||||
default:
|
||||
pr_err("No matching USB irq!\n");
|
||||
return;
|
||||
}
|
||||
nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff);
|
||||
}
|
||||
|
||||
static void nlm_xlpii_usb_hw_reset(int node, int port)
|
||||
{
|
||||
u64 port_addr, xhci_base, pci_base;
|
||||
void __iomem *corebase;
|
||||
u32 val;
|
||||
|
||||
port_addr = nlm_xlpii_get_usb_regbase(node, port);
|
||||
|
||||
/* Set frequency */
|
||||
val = nlm_read_usb_reg(port_addr, XLPII_USB_PHY_LOS_LV);
|
||||
val &= ~(0x3f << XLPII_FSEL);
|
||||
val |= (0x27 << XLPII_FSEL);
|
||||
nlm_write_usb_reg(port_addr, XLPII_USB_PHY_LOS_LV, val);
|
||||
|
||||
val = nlm_read_usb_reg(port_addr, XLPII_USB_RFCLK_REG);
|
||||
val |= (1 << XLPII_VVLD);
|
||||
nlm_write_usb_reg(port_addr, XLPII_USB_RFCLK_REG, val);
|
||||
|
||||
/* PHY reset */
|
||||
val = nlm_read_usb_reg(port_addr, XLPII_USB_PHY_TEST);
|
||||
val &= (XLPII_ATERESET | XLPII_LOOPEN | XLPII_TESTPDHSP
|
||||
| XLPII_TESTPDSSP | XLPII_TESTBURNIN);
|
||||
nlm_write_usb_reg(port_addr, XLPII_USB_PHY_TEST, val);
|
||||
|
||||
/* Setup control register */
|
||||
val = XLPII_VAUXRST | XLPII_VCCRST | (1 << XLPII_NUM2PORT)
|
||||
| (1 << XLPII_NUM3PORT) | XLPII_MS_CSYSREQ | XLPII_XS_CSYSREQ
|
||||
| XLPII_RETENABLEN | XLPII_XHCIREV;
|
||||
nlm_write_usb_reg(port_addr, XLPII_USB3_CTL_0, val);
|
||||
|
||||
/* Enable interrupts */
|
||||
nlm_write_usb_reg(port_addr, XLPII_USB3_INT_MASK, 0x00000001);
|
||||
|
||||
/* Clear all interrupts */
|
||||
nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff);
|
||||
|
||||
udelay(2000);
|
||||
|
||||
/* XHCI configuration at PCI mem */
|
||||
pci_base = nlm_xlpii_get_usb_pcibase(node, port);
|
||||
xhci_base = nlm_read_usb_reg(pci_base, 0x4) & ~0xf;
|
||||
corebase = ioremap(xhci_base, 0x10000);
|
||||
if (!corebase)
|
||||
return;
|
||||
|
||||
writel(0x240002, corebase + 0xc2c0);
|
||||
/* GCTL 0xc110 */
|
||||
val = readl(corebase + 0xc110);
|
||||
val &= ~(0x3 << 12);
|
||||
val |= (1 << 12);
|
||||
writel(val, corebase + 0xc110);
|
||||
udelay(100);
|
||||
|
||||
/* PHYCFG 0xc200 */
|
||||
val = readl(corebase + 0xc200);
|
||||
val &= ~(1 << 6);
|
||||
writel(val, corebase + 0xc200);
|
||||
udelay(100);
|
||||
|
||||
/* PIPECTL 0xc2c0 */
|
||||
val = readl(corebase + 0xc2c0);
|
||||
val &= ~(1 << 17);
|
||||
writel(val, corebase + 0xc2c0);
|
||||
|
||||
iounmap(corebase);
|
||||
}
|
||||
|
||||
static int __init nlm_platform_xlpii_usb_init(void)
|
||||
{
|
||||
if (!cpu_is_xlpii())
|
||||
return 0;
|
||||
|
||||
pr_info("Initializing 2XX USB Interface\n");
|
||||
nlm_xlpii_usb_hw_reset(0, 1);
|
||||
nlm_xlpii_usb_hw_reset(0, 2);
|
||||
nlm_xlpii_usb_hw_reset(0, 3);
|
||||
nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_0_IRQ, xlpii_usb_ack);
|
||||
nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_1_IRQ, xlpii_usb_ack);
|
||||
nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_2_IRQ, xlpii_usb_ack);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
arch_initcall(nlm_platform_xlpii_usb_init);
|
||||
|
||||
static u64 xlp_usb_dmamask = ~(u32)0;
|
||||
|
||||
/* Fixup IRQ for USB devices on XLP the SoC PCIe bus */
|
||||
static void nlm_usb_fixup_final(struct pci_dev *dev)
|
||||
{
|
||||
dev->dev.dma_mask = &xlp_usb_dmamask;
|
||||
dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
|
||||
switch (dev->devfn) {
|
||||
case 0x21:
|
||||
dev->irq = PIC_2XX_XHCI_0_IRQ;
|
||||
break;
|
||||
case 0x22:
|
||||
dev->irq = PIC_2XX_XHCI_1_IRQ;
|
||||
break;
|
||||
case 0x23:
|
||||
dev->irq = PIC_2XX_XHCI_2_IRQ;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_XHCI,
|
||||
nlm_usb_fixup_final);
|
||||
|
|
@ -99,6 +99,9 @@ static void nlm_usb_hw_reset(int node, int port)
|
|||
|
||||
static int __init nlm_platform_usb_init(void)
|
||||
{
|
||||
if (cpu_is_xlpii())
|
||||
return 0;
|
||||
|
||||
pr_info("Initializing USB Interface\n");
|
||||
nlm_usb_hw_reset(0, 0);
|
||||
nlm_usb_hw_reset(0, 3);
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue