forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Staging: comedi: Fix WARNING issue in dt2801.c

Browse source 
This is a patch to the dt2801.c file that fixes up a Block comments
issues found by the checkpatch.pl tool.

i.e. Block comments use a trailing */ on a separate line

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Ravishankar Karkala Mallikarjunayya 2016-05-17 15:43:57 +05:30 • committed by Greg Kroah-Hartman
parent 805c5f9328
commit 9c84ae6b69
1 changed files with 50 additions and 45 deletions
Download patch file Download diff file Expand all files Collapse all files

95
drivers/staging/comedi/drivers/dt2801.c
View file

@ -4,30 +4,30 @@
*
*/
/*
Driver: dt2801
Description: Data Translation DT2801 series and DT01-EZ
Author: ds
Status: works
Devices: [Data Translation] DT2801 (dt2801), DT2801-A, DT2801/5716A,
DT2805, DT2805/5716A, DT2808, DT2818, DT2809, DT01-EZ
This driver can autoprobe the type of board.
Configuration options:
[0] - I/O port base address
[1] - unused
[2] - A/D reference 0=differential, 1=single-ended
[3] - A/D range
0 = [-10, 10]
1 = [0,10]
[4] - D/A 0 range
0 = [-10, 10]
1 = [-5,5]
2 = [-2.5,2.5]
3 = [0,10]
4 = [0,5]
[5] - D/A 1 range (same choices)
*/
* Driver: dt2801
* Description: Data Translation DT2801 series and DT01-EZ
* Author: ds
* Status: works
* Devices: [Data Translation] DT2801 (dt2801), DT2801-A, DT2801/5716A,
* DT2805, DT2805/5716A, DT2808, DT2818, DT2809, DT01-EZ
*
* This driver can autoprobe the type of board.
*
* Configuration options:
* [0] - I/O port base address
* [1] - unused
* [2] - A/D reference 0=differential, 1=single-ended
* [3] - A/D range
* 0 = [-10, 10]
* 1 = [0,10]
* [4] - D/A 0 range
* 0 = [-10, 10]
* 1 = [-5,5]
* 2 = [-2.5,2.5]
* 3 = [0,10]
* 4 = [0,5]
* [5] - D/A 1 range (same choices)
*/
#include <linux/module.h>
#include "../comedidev.h"
@ -65,9 +65,10 @@ Configuration options:
#define DT_C_SET_AD 0xd
#define DT_C_READ_AD 0xe
/* Command modifiers (only used with read/write), EXTTRIG can be
used with some other commands.
*/
/*
* Command modifiers (only used with read/write), EXTTRIG can be
* used with some other commands.
*/
#define DT_MOD_DMA BIT(4)
#define DT_MOD_CONT BIT(5)
#define DT_MOD_EXTCLK BIT(6)
@ -135,9 +136,10 @@ struct dt2801_board {
int dabits;
};
/* Typeid's for the different boards of the DT2801-series
(taken from the test-software, that comes with the board)
*/
/*
* Typeid's for the different boards of the DT2801-series
* (taken from the test-software, that comes with the board)
*/
static const struct dt2801_board boardtypes[] = {
{
.name = "dt2801",
@ -209,15 +211,18 @@ struct dt2801_private {
const struct comedi_lrange *dac_range_types[2];
};
/* These are the low-level routines:
writecommand: write a command to the board
writedata: write data byte
readdata: read data byte
/*
* These are the low-level routines:
* writecommand: write a command to the board
* writedata: write data byte
* readdata: read data byte
*/
/* Only checks DataOutReady-flag, not the Ready-flag as it is done
in the examples of the manual. I don't see why this should be
necessary. */
/*
* Only checks DataOutReady-flag, not the Ready-flag as it is done
* in the examples of the manual. I don't see why this should be
* necessary.
*/
static int dt2801_readdata(struct comedi_device *dev, int *data)
{
int stat = 0;
@ -517,14 +522,14 @@ static int dt2801_dio_insn_config(struct comedi_device *dev,
}
/*
options:
[0] - i/o base
[1] - unused
[2] - a/d 0=differential, 1=single-ended
[3] - a/d range 0=[-10,10], 1=[0,10]
[4] - dac0 range 0=[-10,10], 1=[-5,5], 2=[-2.5,2.5] 3=[0,10], 4=[0,5]
[5] - dac1 range 0=[-10,10], 1=[-5,5], 2=[-2.5,2.5] 3=[0,10], 4=[0,5]
*/
* options:
* [0] - i/o base
* [1] - unused
* [2] - a/d 0=differential, 1=single-ended
* [3] - a/d range 0=[-10,10], 1=[0,10]
* [4] - dac0 range 0=[-10,10], 1=[-5,5], 2=[-2.5,2.5] 3=[0,10], 4=[0,5]
* [5] - dac1 range 0=[-10,10], 1=[-5,5], 2=[-2.5,2.5] 3=[0,10], 4=[0,5]
*/
static int dt2801_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
const struct dt2801_board *board;