Merge commit 'gcl/next' into next

Documentation/powerpc/dts-bindings/fsl/mpc5121-psc.txt

@@ -0,0 +1,70 @@
+MPC5121 PSC Device Tree Bindings
+
+PSC in UART mode
+----------------
+
+For PSC in UART mode the needed PSC serial devices
+are specified by fsl,mpc5121-psc-uart nodes in the
+fsl,mpc5121-immr SoC node. Additionally the PSC FIFO
+Controller node fsl,mpc5121-psc-fifo is requered there:
+
+fsl,mpc5121-psc-uart nodes
+--------------------------
+
+Required properties :
+ - compatible : Should contain "fsl,mpc5121-psc-uart" and "fsl,mpc5121-psc"
+ - cell-index : Index of the PSC in hardware
+ - reg : Offset and length of the register set for the PSC device
+ - interrupts : <a b> where a is the interrupt number of the
+   PSC FIFO Controller and b is a field that represents an
+   encoding of the sense and level information for the interrupt.
+ - interrupt-parent : the phandle for the interrupt controller that
+   services interrupts for this device.
+
+Recommended properties :
+ - fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4)
+ - fsl,tx-fifo-size : the size of the TX fifo slice (a multiple of 4)
+
+
+fsl,mpc5121-psc-fifo node
+-------------------------
+
+Required properties :
+ - compatible : Should be "fsl,mpc5121-psc-fifo"
+ - reg : Offset and length of the register set for the PSC
+         FIFO Controller
+ - interrupts : <a b> where a is the interrupt number of the
+   PSC FIFO Controller and b is a field that represents an
+   encoding of the sense and level information for the interrupt.
+ - interrupt-parent : the phandle for the interrupt controller that
+   services interrupts for this device.
+
+
+Example for a board using PSC0 and PSC1 devices in serial mode:
+
+serial@11000 {
+	compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+	cell-index = <0>;
+	reg = <0x11000 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+	fsl,rx-fifo-size = <16>;
+	fsl,tx-fifo-size = <16>;
+};
+
+serial@11100 {
+	compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+	cell-index = <1>;
+	reg = <0x11100 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+	fsl,rx-fifo-size = <16>;
+	fsl,tx-fifo-size = <16>;
+};
+
+pscfifo@11f00 {
+	compatible = "fsl,mpc5121-psc-fifo";
+	reg = <0x11f00 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+};

Documentation/powerpc/dts-bindings/fsl/spi.txt

@@ -13,6 +13,11 @@ Required properties:
 - interrupt-parent : the phandle for the interrupt controller that
   services interrupts for this device.
 
+Optional properties:
+- gpios : specifies the gpio pins to be used for chipselects.
+  The gpios will be referred to as reg = <index> in the SPI child nodes.
+  If unspecified, a single SPI device without a chip select can be used.
+
 Example:
 	spi@4c0 {
 		cell-index = <0>;
@@ -21,4 +26,6 @@ Example:
 		interrupts = <82 0>;
 		interrupt-parent = <700>;
 		mode = "cpu";
+		gpios = <&gpio 18 1	// device reg=<0>
+			 &gpio 19 1>;	// device reg=<1>
 	};