forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Merge branch 'for_3.8-rc1' into v4l_for_linus

Browse source 
* for_3.8-rc1: (243 commits)
  [media] omap3isp: Replace cpu_is_omap3630() with ISP revision check
  [media] omap3isp: Prepare/unprepare clocks before/after enable/disable
  [media] omap3isp: preview: Add support for 8-bit formats at the sink pad
  [media] omap3isp: Replace printk with dev_*
  [media] omap3isp: Find source pad from external entity
  [media] omap3isp: Configure CSI-2 phy based on platform data
  [media] omap3isp: Add PHY routing configuration
  [media] omap3isp: Add CSI configuration registers from control block to ISP resources
  [media] omap3isp: Remove unneeded module memory address definitions
  [media] omap3isp: Use monotonic timestamps for statistics buffers
  [media] uvcvideo: Fix control value clamping for unsigned integer controls
  [media] uvcvideo: Mark first output terminal as default video node
  [media] uvcvideo: Add VIDIOC_[GS]_PRIORITY support
  [media] uvcvideo: Return -ENOTTY for unsupported ioctls
  [media] uvcvideo: Set device_caps in VIDIOC_QUERYCAP
  [media] uvcvideo: Don't fail when an unsupported format is requested
  [media] uvcvideo: Return -EACCES when trying to access a read/write-only control
  [media] uvcvideo: Set error_idx properly for extended controls API failures
  [media] rtl28xxu: add NOXON DAB/DAB+ USB dongle rev 2
  [media] fc2580: write some registers conditionally
  ...
This commit is contained in:
Mauro Carvalho Chehab 2012-12-11 11:28:37 -02:00
commit 77c53d0b56
314 changed files with 7781 additions and 1890 deletions
Download patch file Download diff file Expand all files Collapse all files

7
Documentation/DocBook/media/v4l/compat.xml
View file

@ -2586,6 +2586,13 @@ ioctls.</para>
<para>Vendor and device specific media bus pixel formats. <para>Vendor and device specific media bus pixel formats.
<xref linkend="v4l2-mbus-vendor-spec-fmts" />.</para> <xref linkend="v4l2-mbus-vendor-spec-fmts" />.</para>
</listitem> </listitem>
<listitem>
<para>Importing DMABUF file descriptors as a new IO method described
in <xref linkend="dmabuf" />.</para>
</listitem>
<listitem>
<para>Exporting DMABUF files using &VIDIOC-EXPBUF; ioctl.</para>
</listitem>
</itemizedlist> </itemizedlist>
</section> </section>

188
Documentation/DocBook/media/v4l/io.xml
View file

@ -331,7 +331,7 @@ application until one or more buffers can be dequeued. By default
outgoing queue. When the <constant>O_NONBLOCK</constant> flag was outgoing queue. When the <constant>O_NONBLOCK</constant> flag was
given to the &func-open; function, <constant>VIDIOC_DQBUF</constant> given to the &func-open; function, <constant>VIDIOC_DQBUF</constant>
returns immediately with an &EAGAIN; when no buffer is available. The returns immediately with an &EAGAIN; when no buffer is available. The
&func-select; or &func-poll; function are always available.</para> &func-select; or &func-poll; functions are always available.</para>
<para>To start and stop capturing or output applications call the <para>To start and stop capturing or output applications call the
&VIDIOC-STREAMON; and &VIDIOC-STREAMOFF; ioctl. Note &VIDIOC-STREAMON; and &VIDIOC-STREAMOFF; ioctl. Note
@ -472,6 +472,165 @@ rest should be evident.</para>
</footnote></para> </footnote></para>
</section> </section>
<section id="dmabuf">
<title>Streaming I/O (DMA buffer importing)</title>
<note>
<title>Experimental</title>
<para>This is an <link linkend="experimental"> experimental </link>
interface and may change in the future.</para>
</note>
<para>The DMABUF framework provides a generic method for sharing buffers
between multiple devices. Device drivers that support DMABUF can export a DMA
buffer to userspace as a file descriptor (known as the exporter role), import a
DMA buffer from userspace using a file descriptor previously exported for a
different or the same device (known as the importer role), or both. This
section describes the DMABUF importer role API in V4L2.</para>
<para>Refer to <link linked="vidioc-expbuf"> DMABUF exporting </link> for
details about exporting V4L2 buffers as DMABUF file descriptors.</para>
<para>Input and output devices support the streaming I/O method when the
<constant>V4L2_CAP_STREAMING</constant> flag in the
<structfield>capabilities</structfield> field of &v4l2-capability; returned by
the &VIDIOC-QUERYCAP; ioctl is set. Whether importing DMA buffers through
DMABUF file descriptors is supported is determined by calling the
&VIDIOC-REQBUFS; ioctl with the memory type set to
<constant>V4L2_MEMORY_DMABUF</constant>.</para>
<para>This I/O method is dedicated to sharing DMA buffers between different
devices, which may be V4L devices or other video-related devices (e.g. DRM).
Buffers (planes) are allocated by a driver on behalf of an application. Next,
these buffers are exported to the application as file descriptors using an API
which is specific for an allocator driver. Only such file descriptor are
exchanged. The descriptors and meta-information are passed in &v4l2-buffer; (or
in &v4l2-plane; in the multi-planar API case). The driver must be switched
into DMABUF I/O mode by calling the &VIDIOC-REQBUFS; with the desired buffer
type.</para>
<example>
<title>Initiating streaming I/O with DMABUF file descriptors</title>
<programlisting>
&v4l2-requestbuffers; reqbuf;
memset(&amp;reqbuf, 0, sizeof (reqbuf));
reqbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
reqbuf.memory = V4L2_MEMORY_DMABUF;
reqbuf.count = 1;
if (ioctl(fd, &VIDIOC-REQBUFS;, &amp;reqbuf) == -1) {
if (errno == EINVAL)
printf("Video capturing or DMABUF streaming is not supported\n");
else
perror("VIDIOC_REQBUFS");
exit(EXIT_FAILURE);
}
</programlisting>
</example>
<para>The buffer (plane) file descriptor is passed on the fly with the
&VIDIOC-QBUF; ioctl. In case of multiplanar buffers, every plane can be
associated with a different DMABUF descriptor. Although buffers are commonly
cycled, applications can pass a different DMABUF descriptor at each
<constant>VIDIOC_QBUF</constant> call.</para>
<example>
<title>Queueing DMABUF using single plane API</title>
<programlisting>
int buffer_queue(int v4lfd, int index, int dmafd)
{
&v4l2-buffer; buf;
memset(&amp;buf, 0, sizeof buf);
buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
buf.memory = V4L2_MEMORY_DMABUF;
buf.index = index;
buf.m.fd = dmafd;
if (ioctl(v4lfd, &VIDIOC-QBUF;, &amp;buf) == -1) {
perror("VIDIOC_QBUF");
return -1;
}
return 0;
}
</programlisting>
</example>
<example>
<title>Queueing DMABUF using multi plane API</title>
<programlisting>
int buffer_queue_mp(int v4lfd, int index, int dmafd[], int n_planes)
{
&v4l2-buffer; buf;
&v4l2-plane; planes[VIDEO_MAX_PLANES];
int i;
memset(&amp;buf, 0, sizeof buf);
buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
buf.memory = V4L2_MEMORY_DMABUF;
buf.index = index;
buf.m.planes = planes;
buf.length = n_planes;
memset(&amp;planes, 0, sizeof planes);
for (i = 0; i &lt; n_planes; ++i)
buf.m.planes[i].m.fd = dmafd[i];
if (ioctl(v4lfd, &VIDIOC-QBUF;, &amp;buf) == -1) {
perror("VIDIOC_QBUF");
return -1;
}
return 0;
}
</programlisting>
</example>
<para>Captured or displayed buffers are dequeued with the
&VIDIOC-DQBUF; ioctl. The driver can unlock the buffer at any
time between the completion of the DMA and this ioctl. The memory is
also unlocked when &VIDIOC-STREAMOFF; is called, &VIDIOC-REQBUFS;, or
when the device is closed.</para>
<para>For capturing applications it is customary to enqueue a
number of empty buffers, to start capturing and enter the read loop.
Here the application waits until a filled buffer can be dequeued, and
re-enqueues the buffer when the data is no longer needed. Output
applications fill and enqueue buffers, when enough buffers are stacked
up output is started. In the write loop, when the application
runs out of free buffers it must wait until an empty buffer can be
dequeued and reused. Two methods exist to suspend execution of the
application until one or more buffers can be dequeued. By default
<constant>VIDIOC_DQBUF</constant> blocks when no buffer is in the
outgoing queue. When the <constant>O_NONBLOCK</constant> flag was
given to the &func-open; function, <constant>VIDIOC_DQBUF</constant>
returns immediately with an &EAGAIN; when no buffer is available. The
&func-select; and &func-poll; functions are always available.</para>
<para>To start and stop capturing or displaying applications call the
&VIDIOC-STREAMON; and &VIDIOC-STREAMOFF; ioctls. Note that
<constant>VIDIOC_STREAMOFF</constant> removes all buffers from both queues and
unlocks all buffers as a side effect. Since there is no notion of doing
anything "now" on a multitasking system, if an application needs to synchronize
with another event it should examine the &v4l2-buffer;
<structfield>timestamp</structfield> of captured buffers, or set the field
before enqueuing buffers for output.</para>
<para>Drivers implementing DMABUF importing I/O must support the
<constant>VIDIOC_REQBUFS</constant>, <constant>VIDIOC_QBUF</constant>,
<constant>VIDIOC_DQBUF</constant>, <constant>VIDIOC_STREAMON</constant> and
<constant>VIDIOC_STREAMOFF</constant> ioctls, and the
<function>select()</function> and <function>poll()</function> functions.</para>
</section>
<section id="async"> <section id="async">
<title>Asynchronous I/O</title> <title>Asynchronous I/O</title>
@ -672,6 +831,14 @@ memory, set by the application. See <xref linkend="userp" /> for details.
in the <structfield>length</structfield> field of this in the <structfield>length</structfield> field of this
<structname>v4l2_buffer</structname> structure.</entry> <structname>v4l2_buffer</structname> structure.</entry>
</row> </row>
<row>
<entry></entry>
<entry>int</entry>
<entry><structfield>fd</structfield></entry>
<entry>For the single-plane API and when
<structfield>memory</structfield> is <constant>V4L2_MEMORY_DMABUF</constant> this
is the file descriptor associated with a DMABUF buffer.</entry>
</row>
<row> <row>
<entry>__u32</entry> <entry>__u32</entry>
<entry><structfield>length</structfield></entry> <entry><structfield>length</structfield></entry>
@ -743,6 +910,15 @@ should set this to 0.</entry>
pointer to the memory allocated for this plane by an application. pointer to the memory allocated for this plane by an application.
</entry> </entry>
</row> </row>
<row>
<entry></entry>
<entry>int</entry>
<entry><structfield>fd</structfield></entry>
<entry>When the memory type in the containing &v4l2-buffer; is
<constant>V4L2_MEMORY_DMABUF</constant>, this is a file
descriptor associated with a DMABUF buffer, similar to the
<structfield>fd</structfield> field in &v4l2-buffer;.</entry>
</row>
<row> <row>
<entry>__u32</entry> <entry>__u32</entry>
<entry><structfield>data_offset</structfield></entry> <entry><structfield>data_offset</structfield></entry>
@ -923,7 +1099,7 @@ application. Drivers set or clear this flag when the
</row> </row>
<row> <row>
<entry><constant>V4L2_BUF_FLAG_NO_CACHE_INVALIDATE</constant></entry> <entry><constant>V4L2_BUF_FLAG_NO_CACHE_INVALIDATE</constant></entry>
<entry>0x0400</entry> <entry>0x0800</entry>
<entry>Caches do not have to be invalidated for this buffer. <entry>Caches do not have to be invalidated for this buffer.
Typically applications shall use this flag if the data captured in the buffer Typically applications shall use this flag if the data captured in the buffer
is not going to be touched by the CPU, instead the buffer will, probably, be is not going to be touched by the CPU, instead the buffer will, probably, be
@ -932,7 +1108,7 @@ passed on to a DMA-capable hardware unit for further processing or output.
</row> </row>
<row> <row>
<entry><constant>V4L2_BUF_FLAG_NO_CACHE_CLEAN</constant></entry> <entry><constant>V4L2_BUF_FLAG_NO_CACHE_CLEAN</constant></entry>
<entry>0x0800</entry> <entry>0x1000</entry>
<entry>Caches do not have to be cleaned for this buffer. <entry>Caches do not have to be cleaned for this buffer.
Typically applications shall use this flag for output buffers if the data Typically applications shall use this flag for output buffers if the data
in this buffer has not been created by the CPU but by some DMA-capable unit, in this buffer has not been created by the CPU but by some DMA-capable unit,
@ -964,6 +1140,12 @@ pointer</link> I/O.</entry>
<entry>3</entry> <entry>3</entry>
<entry>[to do]</entry> <entry>[to do]</entry>
</row> </row>
<row>
<entry><constant>V4L2_MEMORY_DMABUF</constant></entry>
<entry>4</entry>
<entry>The buffer is used for <link linkend="dmabuf">DMA shared
buffer</link> I/O.</entry>
</row>
</tbody> </tbody>
</tgroup> </tgroup>
</table> </table>

1
Documentation/DocBook/media/v4l/v4l2.xml
View file

@ -543,6 +543,7 @@ and discussions on the V4L mailing list.</revremark>
&sub-enuminput; &sub-enuminput;
&sub-enumoutput; &sub-enumoutput;
&sub-enumstd; &sub-enumstd;
&sub-expbuf;
&sub-g-audio; &sub-g-audio;
&sub-g-audioout; &sub-g-audioout;
&sub-g-crop; &sub-g-crop;

16
Documentation/DocBook/media/v4l/vidioc-create-bufs.xml
View file

@ -6,7 +6,8 @@
<refnamediv> <refnamediv>
<refname>VIDIOC_CREATE_BUFS</refname> <refname>VIDIOC_CREATE_BUFS</refname>
<refpurpose>Create buffers for Memory Mapped or User Pointer I/O</refpurpose> <refpurpose>Create buffers for Memory Mapped or User Pointer or DMA Buffer
I/O</refpurpose>
</refnamediv> </refnamediv>
<refsynopsisdiv> <refsynopsisdiv>
@ -55,11 +56,11 @@
</note> </note>
<para>This ioctl is used to create buffers for <link linkend="mmap">memory <para>This ioctl is used to create buffers for <link linkend="mmap">memory
mapped</link> or <link linkend="userp">user pointer</link> mapped</link> or <link linkend="userp">user pointer</link> or <link
I/O. It can be used as an alternative or in addition to the linkend="dmabuf">DMA buffer</link> I/O. It can be used as an alternative or in
<constant>VIDIOC_REQBUFS</constant> ioctl, when a tighter control over buffers addition to the <constant>VIDIOC_REQBUFS</constant> ioctl, when a tighter
is required. This ioctl can be called multiple times to create buffers of control over buffers is required. This ioctl can be called multiple times to
different sizes.</para> create buffers of different sizes.</para>
<para>To allocate device buffers applications initialize relevant fields of <para>To allocate device buffers applications initialize relevant fields of
the <structname>v4l2_create_buffers</structname> structure. They set the the <structname>v4l2_create_buffers</structname> structure. They set the
@ -109,7 +110,8 @@ information.</para>
<entry>__u32</entry> <entry>__u32</entry>
<entry><structfield>memory</structfield></entry> <entry><structfield>memory</structfield></entry>
<entry>Applications set this field to <entry>Applications set this field to
<constant>V4L2_MEMORY_MMAP</constant> or <constant>V4L2_MEMORY_MMAP</constant>,
<constant>V4L2_MEMORY_DMABUF</constant> or
<constant>V4L2_MEMORY_USERPTR</constant>. See <xref linkend="v4l2-memory" <constant>V4L2_MEMORY_USERPTR</constant>. See <xref linkend="v4l2-memory"
/></entry> /></entry>
</row> </row>

212
Documentation/DocBook/media/v4l/vidioc-expbuf.xml Normal file
View file

@ -0,0 +1,212 @@
<refentry id="vidioc-expbuf">
<refmeta>
<refentrytitle>ioctl VIDIOC_EXPBUF</refentrytitle>
&manvol;
</refmeta>
<refnamediv>
<refname>VIDIOC_EXPBUF</refname>
<refpurpose>Export a buffer as a DMABUF file descriptor.</refpurpose>
</refnamediv>
<refsynopsisdiv>
<funcsynopsis>
<funcprototype>
<funcdef>int <function>ioctl</function></funcdef>
<paramdef>int <parameter>fd</parameter></paramdef>
<paramdef>int <parameter>request</parameter></paramdef>
<paramdef>struct v4l2_exportbuffer *<parameter>argp</parameter></paramdef>
</funcprototype>
</funcsynopsis>
</refsynopsisdiv>
<refsect1>
<title>Arguments</title>
<variablelist>
<varlistentry>
<term><parameter>fd</parameter></term>
<listitem>
<para>&fd;</para>
</listitem>
</varlistentry>
<varlistentry>
<term><parameter>request</parameter></term>
<listitem>
<para>VIDIOC_EXPBUF</para>
</listitem>
</varlistentry>
<varlistentry>
<term><parameter>argp</parameter></term>
<listitem>
<para></para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>Description</title>
<note>
<title>Experimental</title>
<para>This is an <link linkend="experimental"> experimental </link>
interface and may change in the future.</para>
</note>
<para>This ioctl is an extension to the <link linkend="mmap">memory
mapping</link> I/O method, therefore it is available only for
<constant>V4L2_MEMORY_MMAP</constant> buffers. It can be used to export a
buffer as a DMABUF file at any time after buffers have been allocated with the
&VIDIOC-REQBUFS; ioctl.</para>
<para> To export a buffer, applications fill &v4l2-exportbuffer;. The
<structfield> type </structfield> field is set to the same buffer type as was
previously used with &v4l2-requestbuffers;<structfield> type </structfield>.
Applications must also set the <structfield> index </structfield> field. Valid
index numbers range from zero to the number of buffers allocated with
&VIDIOC-REQBUFS; (&v4l2-requestbuffers;<structfield> count </structfield>)
minus one. For the multi-planar API, applications set the <structfield> plane
</structfield> field to the index of the plane to be exported. Valid planes
range from zero to the maximal number of valid planes for the currently active
format. For the single-planar API, applications must set <structfield> plane
</structfield> to zero. Additional flags may be posted in the <structfield>
flags </structfield> field. Refer to a manual for open() for details.
Currently only O_CLOEXEC is supported. All other fields must be set to zero.
In the case of multi-planar API, every plane is exported separately using
multiple <constant> VIDIOC_EXPBUF </constant> calls. </para>
<para> After calling <constant>VIDIOC_EXPBUF</constant> the <structfield> fd
</structfield> field will be set by a driver. This is a DMABUF file
descriptor. The application may pass it to other DMABUF-aware devices. Refer to
<link linkend="dmabuf">DMABUF importing</link> for details about importing
DMABUF files into V4L2 nodes. It is recommended to close a DMABUF file when it
is no longer used to allow the associated memory to be reclaimed. </para>
</refsect1>
<refsect1>
<section>
<title>Examples</title>
<example>
<title>Exporting a buffer.</title>
<programlisting>
int buffer_export(int v4lfd, &v4l2-buf-type; bt, int index, int *dmafd)
{
&v4l2-exportbuffer; expbuf;
memset(&amp;expbuf, 0, sizeof(expbuf));
expbuf.type = bt;
expbuf.index = index;
if (ioctl(v4lfd, &VIDIOC-EXPBUF;, &amp;expbuf) == -1) {
perror("VIDIOC_EXPBUF");
return -1;
}
*dmafd = expbuf.fd;
return 0;
}
</programlisting>
</example>
<example>
<title>Exporting a buffer using the multi-planar API.</title>
<programlisting>
int buffer_export_mp(int v4lfd, &v4l2-buf-type; bt, int index,
int dmafd[], int n_planes)
{
int i;
for (i = 0; i &lt; n_planes; ++i) {
&v4l2-exportbuffer; expbuf;
memset(&amp;expbuf, 0, sizeof(expbuf));
expbuf.type = bt;
expbuf.index = index;
expbuf.plane = i;
if (ioctl(v4lfd, &VIDIOC-EXPBUF;, &amp;expbuf) == -1) {
perror("VIDIOC_EXPBUF");
while (i)
close(dmafd[--i]);
return -1;
}
dmafd[i] = expbuf.fd;
}
return 0;
}
</programlisting>
</example>
</section>
</refsect1>
<refsect1>
<table pgwide="1" frame="none" id="v4l2-exportbuffer">
<title>struct <structname>v4l2_exportbuffer</structname></title>
<tgroup cols="3">
&cs-str;
<tbody valign="top">
<row>
<entry>__u32</entry>
<entry><structfield>type</structfield></entry>
<entry>Type of the buffer, same as &v4l2-format;
<structfield>type</structfield> or &v4l2-requestbuffers;
<structfield>type</structfield>, set by the application. See <xref
linkend="v4l2-buf-type" /></entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>index</structfield></entry>
<entry>Number of the buffer, set by the application. This field is
only used for <link linkend="mmap">memory mapping</link> I/O and can range from
zero to the number of buffers allocated with the &VIDIOC-REQBUFS; and/or
&VIDIOC-CREATE-BUFS; ioctls. </entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>plane</structfield></entry>
<entry>Index of the plane to be exported when using the
multi-planar API. Otherwise this value must be set to zero. </entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>flags</structfield></entry>
<entry>Flags for the newly created file, currently only <constant>
O_CLOEXEC </constant> is supported, refer to the manual of open() for more
details.</entry>
</row>
<row>
<entry>__s32</entry>
<entry><structfield>fd</structfield></entry>
<entry>The DMABUF file descriptor associated with a buffer. Set by
the driver.</entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>reserved[11]</structfield></entry>
<entry>Reserved field for future use. Must be set to zero.</entry>
</row>
</tbody>
</tgroup>
</table>
</refsect1>
<refsect1>
&return-value;
<variablelist>
<varlistentry>
<term><errorcode>EINVAL</errorcode></term>
<listitem>
<para>A queue is not in MMAP mode or DMABUF exporting is not
supported or <structfield> flags </structfield> or <structfield> type
</structfield> or <structfield> index </structfield> or <structfield> plane
</structfield> fields are invalid.</para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
</refentry>

17
Documentation/DocBook/media/v4l/vidioc-qbuf.xml
View file

@ -109,6 +109,23 @@ they cannot be swapped out to disk. Buffers remain locked until
dequeued, until the &VIDIOC-STREAMOFF; or &VIDIOC-REQBUFS; ioctl is dequeued, until the &VIDIOC-STREAMOFF; or &VIDIOC-REQBUFS; ioctl is
called, or until the device is closed.</para> called, or until the device is closed.</para>
<para>To enqueue a <link linkend="dmabuf">DMABUF</link> buffer applications
set the <structfield>memory</structfield> field to
<constant>V4L2_MEMORY_DMABUF</constant> and the <structfield>m.fd</structfield>
field to a file descriptor associated with a DMABUF buffer. When the
multi-planar API is used the <structfield>m.fd</structfield> fields of the
passed array of &v4l2-plane; have to be used instead. When
<constant>VIDIOC_QBUF</constant> is called with a pointer to this structure the
driver sets the <constant>V4L2_BUF_FLAG_QUEUED</constant> flag and clears the
<constant>V4L2_BUF_FLAG_MAPPED</constant> and
<constant>V4L2_BUF_FLAG_DONE</constant> flags in the
<structfield>flags</structfield> field, or it returns an error code. This
ioctl locks the buffer. Locking a buffer means passing it to a driver for a
hardware access (usually DMA). If an application accesses (reads/writes) a
locked buffer then the result is undefined. Buffers remain locked until
dequeued, until the &VIDIOC-STREAMOFF; or &VIDIOC-REQBUFS; ioctl is called, or
until the device is closed.</para>
<para>Applications call the <constant>VIDIOC_DQBUF</constant> <para>Applications call the <constant>VIDIOC_DQBUF</constant>
ioctl to dequeue a filled (capturing) or displayed (output) buffer ioctl to dequeue a filled (capturing) or displayed (output) buffer
from the driver's outgoing queue. They just set the from the driver's outgoing queue. They just set the

47
Documentation/DocBook/media/v4l/vidioc-reqbufs.xml
View file

@ -48,28 +48,30 @@
<refsect1> <refsect1>
<title>Description</title> <title>Description</title>
<para>This ioctl is used to initiate <link linkend="mmap">memory <para>This ioctl is used to initiate <link linkend="mmap">memory mapped</link>,
mapped</link> or <link linkend="userp">user pointer</link> <link linkend="userp">user pointer</link> or <link
I/O. Memory mapped buffers are located in device memory and must be linkend="dmabuf">DMABUF</link> based I/O. Memory mapped buffers are located in
allocated with this ioctl before they can be mapped into the device memory and must be allocated with this ioctl before they can be mapped
application's address space. User buffers are allocated by into the application's address space. User buffers are allocated by
applications themselves, and this ioctl is merely used to switch the applications themselves, and this ioctl is merely used to switch the driver
driver into user pointer I/O mode and to setup some internal structures.</para> into user pointer I/O mode and to setup some internal structures.
Similarly, DMABUF buffers are allocated by applications through a device
driver, and this ioctl only configures the driver into DMABUF I/O mode without
performing any direct allocation.</para>
<para>To allocate device buffers applications initialize all <para>To allocate device buffers applications initialize all fields of the
fields of the <structname>v4l2_requestbuffers</structname> structure. <structname>v4l2_requestbuffers</structname> structure. They set the
They set the <structfield>type</structfield> field to the respective <structfield>type</structfield> field to the respective stream or buffer type,
stream or buffer type, the <structfield>count</structfield> field to the <structfield>count</structfield> field to the desired number of buffers,
the desired number of buffers, <structfield>memory</structfield> <structfield>memory</structfield> must be set to the requested I/O method and
must be set to the requested I/O method and the <structfield>reserved</structfield> array the <structfield>reserved</structfield> array must be zeroed. When the ioctl is
must be zeroed. When the ioctl called with a pointer to this structure the driver will attempt to allocate the
is called with a pointer to this structure the driver will attempt to allocate requested number of buffers and it stores the actual number allocated in the
the requested number of buffers and it stores the actual number <structfield>count</structfield> field. It can be smaller than the number
allocated in the <structfield>count</structfield> field. It can be requested, even zero, when the driver runs out of free memory. A larger number
smaller than the number requested, even zero, when the driver runs out is also possible when the driver requires more buffers to function correctly.
of free memory. A larger number is also possible when the driver requires For example video output requires at least two buffers, one displayed and one
more buffers to function correctly. For example video output requires at least two buffers, filled by the application.</para>
one displayed and one filled by the application.</para>
<para>When the I/O method is not supported the ioctl <para>When the I/O method is not supported the ioctl
returns an &EINVAL;.</para> returns an &EINVAL;.</para>
@ -102,7 +104,8 @@ as the &v4l2-format; <structfield>type</structfield> field. See <xref
<entry>__u32</entry> <entry>__u32</entry>
<entry><structfield>memory</structfield></entry> <entry><structfield>memory</structfield></entry>
<entry>Applications set this field to <entry>Applications set this field to
<constant>V4L2_MEMORY_MMAP</constant> or <constant>V4L2_MEMORY_MMAP</constant>,
<constant>V4L2_MEMORY_DMABUF</constant> or
<constant>V4L2_MEMORY_USERPTR</constant>. See <xref linkend="v4l2-memory" <constant>V4L2_MEMORY_USERPTR</constant>. See <xref linkend="v4l2-memory"
/>.</entry> />.</entry>
</row> </row>

250
MAINTAINERS
View file

@ -337,6 +337,13 @@ W: http://wireless.kernel.org/
S: Orphan S: Orphan
F: drivers/net/wireless/adm8211.* F: drivers/net/wireless/adm8211.*
ADP1653 FLASH CONTROLLER DRIVER
M: Sakari Ailus <sakari.ailus@iki.fi>
L: linux-media@vger.kernel.org
S: Maintained
F: drivers/media/i2c/adp1653.c
F: include/media/adp1653.h
ADP5520 BACKLIGHT DRIVER WITH IO EXPANDER (ADP5520/ADP5501) ADP5520 BACKLIGHT DRIVER WITH IO EXPANDER (ADP5520/ADP5501)
M: Michael Hennerich <michael.hennerich@analog.com> M: Michael Hennerich <michael.hennerich@analog.com>
L: device-drivers-devel@blackfin.uclinux.org L: device-drivers-devel@blackfin.uclinux.org
@ -1488,6 +1495,14 @@ F: include/linux/ax25.h
F: include/net/ax25.h F: include/net/ax25.h
F: net/ax25/ F: net/ax25/
AZ6007 DVB DRIVER
M: Mauro Carvalho Chehab <mchehab@redhat.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
S: Maintained
F: drivers/media/usb/dvb-usb-v2/az6007.c
B43 WIRELESS DRIVER B43 WIRELESS DRIVER
M: Stefano Brivio <stefano.brivio@polimi.it> M: Stefano Brivio <stefano.brivio@polimi.it>
L: linux-wireless@vger.kernel.org L: linux-wireless@vger.kernel.org
@ -1740,11 +1755,11 @@ F: Documentation/filesystems/btrfs.txt
F: fs/btrfs/ F: fs/btrfs/
BTTV VIDEO4LINUX DRIVER BTTV VIDEO4LINUX DRIVER
M: Mauro Carvalho Chehab <mchehab@infradead.org> M: Mauro Carvalho Chehab <mchehab@redhat.com>
L: linux-media@vger.kernel.org L: linux-media@vger.kernel.org
W: http://linuxtv.org W: http://linuxtv.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git T: git git://linuxtv.org/media_tree.git
S: Maintained S: Odd fixes
F: Documentation/video4linux/bttv/ F: Documentation/video4linux/bttv/
F: drivers/media/pci/bt8xx/bttv* F: drivers/media/pci/bt8xx/bttv*
@ -1773,7 +1788,7 @@ F: fs/cachefiles/
CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
M: Jonathan Corbet <corbet@lwn.net> M: Jonathan Corbet <corbet@lwn.net>
L: linux-media@vger.kernel.org L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git T: git git://linuxtv.org/media_tree.git
S: Maintained S: Maintained
F: Documentation/video4linux/cafe_ccic F: Documentation/video4linux/cafe_ccic
F: drivers/media/platform/marvell-ccic/ F: drivers/media/platform/marvell-ccic/
@ -2160,12 +2175,22 @@ CX18 VIDEO4LINUX DRIVER
M: Andy Walls <awalls@md.metrocast.net> M: Andy Walls <awalls@md.metrocast.net>
L: ivtv-devel@ivtvdriver.org (moderated for non-subscribers) L: ivtv-devel@ivtvdriver.org (moderated for non-subscribers)
L: linux-media@vger.kernel.org L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git T: git git://linuxtv.org/media_tree.git
W: http://linuxtv.org W: http://linuxtv.org
W: http://www.ivtvdriver.org/index.php/Cx18 W: http://www.ivtvdriver.org/index.php/Cx18
S: Maintained S: Maintained
F: Documentation/video4linux/cx18.txt F: Documentation/video4linux/cx18.txt
F: drivers/media/pci/cx18/ F: drivers/media/pci/cx18/
F: include/uapi/linux/ivtv*
CX88 VIDEO4LINUX DRIVER
M: Mauro Carvalho Chehab <mchehab@redhat.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
S: Odd fixes
F: Documentation/video4linux/cx88/
F: drivers/media/pci/cx88/
CXD2820R MEDIA DRIVER CXD2820R MEDIA DRIVER
M: Antti Palosaari <crope@iki.fi> M: Antti Palosaari <crope@iki.fi>
@ -2852,6 +2877,14 @@ L: netdev@vger.kernel.org
S: Maintained S: Maintained
F: drivers/net/ethernet/ibm/ehea/ F: drivers/net/ethernet/ibm/ehea/
EM28XX VIDEO4LINUX DRIVER
M: Mauro Carvalho Chehab <mchehab@redhat.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
S: Maintained
F: drivers/media/usb/em28xx/
EMBEDDED LINUX EMBEDDED LINUX
M: Paul Gortmaker <paul.gortmaker@windriver.com> M: Paul Gortmaker <paul.gortmaker@windriver.com>
M: Matt Mackall <mpm@selenic.com> M: Matt Mackall <mpm@selenic.com>
@ -3050,6 +3083,14 @@ T: git git://git.alsa-project.org/alsa-kernel.git
S: Maintained S: Maintained
F: sound/firewire/ F: sound/firewire/
FIREWIRE MEDIA DRIVERS (firedtv)
M: Stefan Richter <stefanr@s5r6.in-berlin.de>
L: linux-media@vger.kernel.org
L: linux1394-devel@lists.sourceforge.net
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git
S: Maintained
F: drivers/media/firewire/
FIREWIRE SBP-2 TARGET FIREWIRE SBP-2 TARGET
M: Chris Boot <bootc@bootc.net> M: Chris Boot <bootc@bootc.net>
L: linux-scsi@vger.kernel.org L: linux-scsi@vger.kernel.org
@ -3336,56 +3377,56 @@ F: drivers/net/ethernet/aeroflex/
GSPCA FINEPIX SUBDRIVER GSPCA FINEPIX SUBDRIVER
M: Frank Zago <frank@zago.net> M: Frank Zago <frank@zago.net>
L: linux-media@vger.kernel.org L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git T: git git://linuxtv.org/media_tree.git
S: Maintained S: Maintained
F: drivers/media/usb/gspca/finepix.c F: drivers/media/usb/gspca/finepix.c
GSPCA GL860 SUBDRIVER GSPCA GL860 SUBDRIVER
M: Olivier Lorin <o.lorin@laposte.net> M: Olivier Lorin <o.lorin@laposte.net>
L: linux-media@vger.kernel.org L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git T: git git://linuxtv.org/media_tree.git
S: Maintained S: Maintained
F: drivers/media/usb/gspca/gl860/ F: drivers/media/usb/gspca/gl860/
GSPCA M5602 SUBDRIVER GSPCA M5602 SUBDRIVER
M: Erik Andren <erik.andren@gmail.com> M: Erik Andren <erik.andren@gmail.com>
L: linux-media@vger.kernel.org L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git T: git git://linuxtv.org/media_tree.git
S: Maintained S: Maintained
F: drivers/media/usb/gspca/m5602/ F: drivers/media/usb/gspca/m5602/
GSPCA PAC207 SONIXB SUBDRIVER GSPCA PAC207 SONIXB SUBDRIVER
M: Hans de Goede <hdegoede@redhat.com> M: Hans de Goede <hdegoede@redhat.com>
L: linux-media@vger.kernel.org L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git T: git git://linuxtv.org/media_tree.git
S: Maintained S: Maintained
F: drivers/media/usb/gspca/pac207.c F: drivers/media/usb/gspca/pac207.c
GSPCA SN9C20X SUBDRIVER GSPCA SN9C20X SUBDRIVER
M: Brian Johnson <brijohn@gmail.com> M: Brian Johnson <brijohn@gmail.com>
L: linux-media@vger.kernel.org L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git T: git git://linuxtv.org/media_tree.git
S: Maintained S: Maintained
F: drivers/media/usb/gspca/sn9c20x.c F: drivers/media/usb/gspca/sn9c20x.c
GSPCA T613 SUBDRIVER GSPCA T613 SUBDRIVER
M: Leandro Costantino <lcostantino@gmail.com> M: Leandro Costantino <lcostantino@gmail.com>
L: linux-media@vger.kernel.org L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git T: git git://linuxtv.org/media_tree.git
S: Maintained S: Maintained
F: drivers/media/usb/gspca/t613.c F: drivers/media/usb/gspca/t613.c
GSPCA USB WEBCAM DRIVER GSPCA USB WEBCAM DRIVER
M: Hans de Goede <hdegoede@redhat.com> M: Hans de Goede <hdegoede@redhat.com>
L: linux-media@vger.kernel.org L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git T: git git://linuxtv.org/media_tree.git
S: Maintained S: Maintained
F: drivers/media/usb/gspca/ F: drivers/media/usb/gspca/
STK1160 USB VIDEO CAPTURE DRIVER STK1160 USB VIDEO CAPTURE DRIVER
M: Ezequiel Garcia <elezegarcia@gmail.com> M: Ezequiel Garcia <elezegarcia@gmail.com>
L: linux-media@vger.kernel.org L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git T: git git://linuxtv.org/media_tree.git
S: Maintained S: Maintained
F: drivers/media/usb/stk1160/ F: drivers/media/usb/stk1160/
@ -3784,6 +3825,12 @@ F: net/ieee802154/
F: net/mac802154/ F: net/mac802154/
F: drivers/ieee802154/ F: drivers/ieee802154/
IGUANAWORKS USB IR TRANSCEIVER
M: Sean Young <sean@mess.org>
L: linux-media@vger.kernel.org
S: Maintained
F: drivers/media/rc/iguanair.c
IIO SUBSYSTEM AND DRIVERS IIO SUBSYSTEM AND DRIVERS
M: Jonathan Cameron <jic23@cam.ac.uk> M: Jonathan Cameron <jic23@cam.ac.uk>
L: linux-iio@vger.kernel.org L: linux-iio@vger.kernel.org
@ -4158,17 +4205,41 @@ S: Maintained
F: Documentation/hwmon/it87 F: Documentation/hwmon/it87
F: drivers/hwmon/it87.c F: drivers/hwmon/it87.c
IT913X MEDIA DRIVER
M: Malcolm Priestley <tvboxspy@gmail.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org/
Q: http://patchwork.linuxtv.org/project/linux-media/list/
S: Maintained
F: drivers/media/usb/dvb-usb-v2/it913x*
IT913X FE MEDIA DRIVER
M: Malcolm Priestley <tvboxspy@gmail.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org/
Q: http://patchwork.linuxtv.org/project/linux-media/list/
S: Maintained
F: drivers/media/dvb-frontends/it913x-fe*
IVTV VIDEO4LINUX DRIVER IVTV VIDEO4LINUX DRIVER
M: Andy Walls <awalls@md.metrocast.net> M: Andy Walls <awalls@md.metrocast.net>
L: ivtv-devel@ivtvdriver.org (moderated for non-subscribers) L: ivtv-devel@ivtvdriver.org (moderated for non-subscribers)
L: linux-media@vger.kernel.org L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git T: git git://linuxtv.org/media_tree.git
W: http://www.ivtvdriver.org W: http://www.ivtvdriver.org
S: Maintained S: Maintained
F: Documentation/video4linux/*.ivtv F: Documentation/video4linux/*.ivtv
F: drivers/media/pci/ivtv/ F: drivers/media/pci/ivtv/
F: include/linux/ivtv* F: include/linux/ivtv*
IX2505V MEDIA DRIVER
M: Malcolm Priestley <tvboxspy@gmail.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org/
Q: http://patchwork.linuxtv.org/project/linux-media/list/
S: Maintained
F: drivers/media/dvb-frontends/ix2505v*
JC42.4 TEMPERATURE SENSOR DRIVER JC42.4 TEMPERATURE SENSOR DRIVER
M: Guenter Roeck <linux@roeck-us.net> M: Guenter Roeck <linux@roeck-us.net>
L: lm-sensors@lm-sensors.org L: lm-sensors@lm-sensors.org
@ -4613,6 +4684,14 @@ S: Maintained
F: Documentation/hwmon/lm90 F: Documentation/hwmon/lm90
F: drivers/hwmon/lm90.c F: drivers/hwmon/lm90.c
LME2510 MEDIA DRIVER
M: Malcolm Priestley <tvboxspy@gmail.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org/
Q: http://patchwork.linuxtv.org/project/linux-media/list/
S: Maintained
F: drivers/media/usb/dvb-usb-v2/lmedm04*
LOCKDEP AND LOCKSTAT LOCKDEP AND LOCKSTAT
M: Peter Zijlstra <peterz@infradead.org> M: Peter Zijlstra <peterz@infradead.org>
M: Ingo Molnar <mingo@redhat.com> M: Ingo Molnar <mingo@redhat.com>
@ -4703,6 +4782,14 @@ W: http://www.tazenda.demon.co.uk/phil/linux-hp
S: Maintained S: Maintained
F: arch/m68k/hp300/ F: arch/m68k/hp300/
M88RS2000 MEDIA DRIVER
M: Malcolm Priestley <tvboxspy@gmail.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org/
Q: http://patchwork.linuxtv.org/project/linux-media/list/
S: Maintained
F: drivers/media/dvb-frontends/m88rs2000*
MAC80211 MAC80211
M: Johannes Berg <johannes@sipsolutions.net> M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org L: linux-wireless@vger.kernel.org
@ -4795,12 +4882,12 @@ F: Documentation/hwmon/max6650
F: drivers/hwmon/max6650.c F: drivers/hwmon/max6650.c
MEDIA INPUT INFRASTRUCTURE (V4L/DVB) MEDIA INPUT INFRASTRUCTURE (V4L/DVB)
M: Mauro Carvalho Chehab <mchehab@infradead.org> M: Mauro Carvalho Chehab <mchehab@redhat.com>
P: LinuxTV.org Project P: LinuxTV.org Project
L: linux-media@vger.kernel.org L: linux-media@vger.kernel.org
W: http://linuxtv.org W: http://linuxtv.org
Q: http://patchwork.kernel.org/project/linux-media/list/ Q: http://patchwork.kernel.org/project/linux-media/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git T: git git://linuxtv.org/media_tree.git
S: Maintained S: Maintained
F: Documentation/dvb/ F: Documentation/dvb/
F: Documentation/video4linux/ F: Documentation/video4linux/
@ -4808,8 +4895,13 @@ F: Documentation/DocBook/media/
F: drivers/media/ F: drivers/media/
F: drivers/staging/media/ F: drivers/staging/media/
F: include/media/ F: include/media/
F: include/linux/dvb/ F: include/uapi/linux/dvb/
F: include/linux/videodev*.h F: include/uapi/linux/videodev2.h
F: include/uapi/linux/media.h
F: include/uapi/linux/v4l2-*
F: include/uapi/linux/meye.h
F: include/uapi/linux/ivtv*
F: include/uapi/linux/uvcvideo.h
MEGARAID SCSI DRIVERS MEGARAID SCSI DRIVERS
M: Neela Syam Kolli <megaraidlinux@lsi.com> M: Neela Syam Kolli <megaraidlinux@lsi.com>
@ -4883,7 +4975,7 @@ W: http://popies.net/meye/
S: Orphan S: Orphan
F: Documentation/video4linux/meye.txt F: Documentation/video4linux/meye.txt
F: drivers/media/pci/meye/ F: drivers/media/pci/meye/
F: include/linux/meye.h F: include/uapi/linux/meye.h
MOTOROLA IMX MMC/SD HOST CONTROLLER INTERFACE DRIVER MOTOROLA IMX MMC/SD HOST CONTROLLER INTERFACE DRIVER
M: Pavel Pisa <ppisa@pikron.com> M: Pavel Pisa <ppisa@pikron.com>
@ -4897,6 +4989,13 @@ S: Maintained
F: Documentation/serial/moxa-smartio F: Documentation/serial/moxa-smartio
F: drivers/tty/mxser.* F: drivers/tty/mxser.*
MR800 AVERMEDIA USB FM RADIO DRIVER
M: Alexey Klimov <klimov.linux@gmail.com>
L: linux-media@vger.kernel.org
T: git git://linuxtv.org/media_tree.git
S: Maintained
F: drivers/media/radio/radio-mr800.c
MSI LAPTOP SUPPORT MSI LAPTOP SUPPORT
M: "Lee, Chun-Yi" <jlee@novell.com> M: "Lee, Chun-Yi" <jlee@novell.com>
L: platform-driver-x86@vger.kernel.org L: platform-driver-x86@vger.kernel.org
@ -5357,7 +5456,7 @@ F: drivers/char/pcmcia/cm4040_cs.*
OMNIVISION OV7670 SENSOR DRIVER OMNIVISION OV7670 SENSOR DRIVER
M: Jonathan Corbet <corbet@lwn.net> M: Jonathan Corbet <corbet@lwn.net>
L: linux-media@vger.kernel.org L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git T: git git://linuxtv.org/media_tree.git
S: Maintained S: Maintained
F: drivers/media/i2c/ov7670.c F: drivers/media/i2c/ov7670.c
@ -5900,11 +5999,18 @@ M: Mike Isely <isely@pobox.com>
L: pvrusb2@isely.net (subscribers-only) L: pvrusb2@isely.net (subscribers-only)
L: linux-media@vger.kernel.org L: linux-media@vger.kernel.org
W: http://www.isely.net/pvrusb2/ W: http://www.isely.net/pvrusb2/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git T: git git://linuxtv.org/media_tree.git
S: Maintained S: Maintained
F: Documentation/video4linux/README.pvrusb2 F: Documentation/video4linux/README.pvrusb2
F: drivers/media/usb/pvrusb2/ F: drivers/media/usb/pvrusb2/
PWC WEBCAM DRIVER
M: Hans de Goede <hdegoede@redhat.com>
L: linux-media@vger.kernel.org
T: git git://linuxtv.org/media_tree.git
S: Maintained
F: drivers/media/usb/pwc/*
PWM SUBSYSTEM PWM SUBSYSTEM
M: Thierry Reding <thierry.reding@avionic-design.de> M: Thierry Reding <thierry.reding@avionic-design.de>
L: linux-kernel@vger.kernel.org L: linux-kernel@vger.kernel.org
@ -6047,6 +6153,21 @@ S: Maintained
F: drivers/video/aty/radeon* F: drivers/video/aty/radeon*
F: include/linux/radeonfb.h F: include/linux/radeonfb.h
RADIOSHARK RADIO DRIVER
M: Hans de Goede <hdegoede@redhat.com>
L: linux-media@vger.kernel.org
T: git git://linuxtv.org/media_tree.git
S: Maintained
F: drivers/media/radio/radio-shark.c
RADIOSHARK2 RADIO DRIVER
M: Hans de Goede <hdegoede@redhat.com>
L: linux-media@vger.kernel.org
T: git git://linuxtv.org/media_tree.git
S: Maintained
F: drivers/media/radio/radio-shark2.c
F: drivers/media/radio/radio-tea5777.c
RAGE128 FRAMEBUFFER DISPLAY DRIVER RAGE128 FRAMEBUFFER DISPLAY DRIVER
M: Paul Mackerras <paulus@samba.org> M: Paul Mackerras <paulus@samba.org>
L: linux-fbdev@vger.kernel.org L: linux-fbdev@vger.kernel.org
@ -6287,10 +6408,19 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported S: Supported
F: drivers/mmc/host/s3cmci.* F: drivers/mmc/host/s3cmci.*
SAA7134 VIDEO4LINUX DRIVER
M: Mauro Carvalho Chehab <mchehab@redhat.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
S: Odd fixes
F: Documentation/video4linux/saa7134/
F: drivers/media/pci/saa7134/
SAA7146 VIDEO4LINUX-2 DRIVER SAA7146 VIDEO4LINUX-2 DRIVER
M: Michael Hunold <michael@mihu.de> M: Michael Hunold <michael@mihu.de>
L: linux-media@vger.kernel.org L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git T: git git://linuxtv.org/media_tree.git
W: http://www.mihu.de/linux/saa7146 W: http://www.mihu.de/linux/saa7146
S: Maintained S: Maintained
F: drivers/media/common/saa7146/ F: drivers/media/common/saa7146/
@ -6325,6 +6455,14 @@ F: drivers/regulator/s5m*.c
F: drivers/rtc/rtc-sec.c F: drivers/rtc/rtc-sec.c
F: include/linux/mfd/samsung/ F: include/linux/mfd/samsung/
SAMSUNG S3C24XX/S3C64XX SOC SERIES CAMIF DRIVER
M: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
L: linux-media@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
S: Maintained
F: drivers/media/platform/s3c-camif/
F: include/media/s3c_camif.h
SERIAL DRIVERS SERIAL DRIVERS
M: Alan Cox <alan@linux.intel.com> M: Alan Cox <alan@linux.intel.com>
L: linux-serial@vger.kernel.org L: linux-serial@vger.kernel.org
@ -6618,6 +6756,18 @@ S: Supported
F: arch/arm/mach-davinci F: arch/arm/mach-davinci
F: drivers/i2c/busses/i2c-davinci.c F: drivers/i2c/busses/i2c-davinci.c
TI DAVINCI SERIES MEDIA DRIVER
M: Manjunath Hadli <manjunath.hadli@ti.com>
M: Prabhakar Lad <prabhakar.lad@ti.com>
L: linux-media@vger.kernel.org
L: davinci-linux-open-source@linux.davincidsp.com (moderated for non-subscribers)
W: http://linuxtv.org/
Q: http://patchwork.linuxtv.org/project/linux-media/list/
T: git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
S: Supported
F: drivers/media/platform/davinci/
F: include/media/davinci/
SIS 190 ETHERNET DRIVER SIS 190 ETHERNET DRIVER
M: Francois Romieu <romieu@fr.zoreil.com> M: Francois Romieu <romieu@fr.zoreil.com>
L: netdev@vger.kernel.org L: netdev@vger.kernel.org
@ -6684,6 +6834,15 @@ M: Nicolas Pitre <nico@fluxnic.net>
S: Odd Fixes S: Odd Fixes
F: drivers/net/ethernet/smsc/smc91x.* F: drivers/net/ethernet/smsc/smc91x.*
SMIA AND SMIA++ IMAGE SENSOR DRIVER
M: Sakari Ailus <sakari.ailus@iki.fi>
L: linux-media@vger.kernel.org
S: Maintained
F: drivers/media/i2c/smiapp
F: include/media/smiapp.h
F: drivers/media/i2c/smiapp-pll.c
F: drivers/media/i2c/smiapp-pll.h
SMM665 HARDWARE MONITOR DRIVER SMM665 HARDWARE MONITOR DRIVER
M: Guenter Roeck <linux@roeck-us.net> M: Guenter Roeck <linux@roeck-us.net>
L: lm-sensors@lm-sensors.org L: lm-sensors@lm-sensors.org
@ -6742,7 +6901,7 @@ F: arch/ia64/sn/
SOC-CAMERA V4L2 SUBSYSTEM SOC-CAMERA V4L2 SUBSYSTEM
M: Guennadi Liakhovetski <g.liakhovetski@gmx.de> M: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
L: linux-media@vger.kernel.org L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git T: git git://linuxtv.org/media_tree.git
S: Maintained S: Maintained
F: include/media/soc* F: include/media/soc*
F: drivers/media/i2c/soc_camera/ F: drivers/media/i2c/soc_camera/
@ -7232,6 +7391,22 @@ T: git git://linuxtv.org/mkrufky/tuners.git
S: Maintained S: Maintained
F: drivers/media/tuners/tda8290.* F: drivers/media/tuners/tda8290.*
TEA5761 TUNER DRIVER
M: Mauro Carvalho Chehab <mchehab@redhat.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
S: Odd fixes
F: drivers/media/tuners/tea5761.*
TEA5767 TUNER DRIVER
M: Mauro Carvalho Chehab <mchehab@redhat.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
S: Maintained
F: drivers/media/tuners/tea5767.*
TEAM DRIVER TEAM DRIVER
M: Jiri Pirko <jpirko@redhat.com> M: Jiri Pirko <jpirko@redhat.com>
L: netdev@vger.kernel.org L: netdev@vger.kernel.org
@ -7239,6 +7414,12 @@ S: Supported
F: drivers/net/team/ F: drivers/net/team/
F: include/linux/if_team.h F: include/linux/if_team.h
TECHNOTREND USB IR RECEIVER
M: Sean Young <sean@mess.org>
L: linux-media@vger.kernel.org
S: Maintained
F: drivers/media/rc/ttusbir.c
TEGRA SUPPORT TEGRA SUPPORT
M: Stephen Warren <swarren@wwwdotorg.org> M: Stephen Warren <swarren@wwwdotorg.org>
L: linux-tegra@vger.kernel.org L: linux-tegra@vger.kernel.org
@ -7391,6 +7572,14 @@ S: Maintained
F: include/linux/shmem_fs.h F: include/linux/shmem_fs.h
F: mm/shmem.c F: mm/shmem.c
TM6000 VIDEO4LINUX DRIVER
M: Mauro Carvalho Chehab <mchehab@redhat.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
S: Odd fixes
F: drivers/media/usb/tm6000/
TPM DEVICE DRIVER TPM DEVICE DRIVER
M: Kent Yoder <key@linux.vnet.ibm.com> M: Kent Yoder <key@linux.vnet.ibm.com>
M: Rajiv Andrade <mail@srajiv.net> M: Rajiv Andrade <mail@srajiv.net>
@ -7785,7 +7974,7 @@ USB SN9C1xx DRIVER
M: Luca Risolia <luca.risolia@studio.unibo.it> M: Luca Risolia <luca.risolia@studio.unibo.it>
L: linux-usb@vger.kernel.org L: linux-usb@vger.kernel.org
L: linux-media@vger.kernel.org L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git T: git git://linuxtv.org/media_tree.git
W: http://www.linux-projects.org W: http://www.linux-projects.org
S: Maintained S: Maintained
F: Documentation/video4linux/sn9c102.txt F: Documentation/video4linux/sn9c102.txt
@ -7821,10 +8010,11 @@ USB VIDEO CLASS
M: Laurent Pinchart <laurent.pinchart@ideasonboard.com> M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
L: linux-uvc-devel@lists.sourceforge.net (subscribers-only) L: linux-uvc-devel@lists.sourceforge.net (subscribers-only)
L: linux-media@vger.kernel.org L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git T: git git://linuxtv.org/media_tree.git
W: http://www.ideasonboard.org/uvc/ W: http://www.ideasonboard.org/uvc/
S: Maintained S: Maintained
F: drivers/media/usb/uvc/ F: drivers/media/usb/uvc/
F: include/uapi/linux/uvcvideo.h
USB WEBCAM GADGET USB WEBCAM GADGET
M: Laurent Pinchart <laurent.pinchart@ideasonboard.com> M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
@ -7856,7 +8046,7 @@ USB ZR364XX DRIVER
M: Antoine Jacquet <royale@zerezo.com> M: Antoine Jacquet <royale@zerezo.com>
L: linux-usb@vger.kernel.org L: linux-usb@vger.kernel.org
L: linux-media@vger.kernel.org L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git T: git git://linuxtv.org/media_tree.git
W: http://royale.zerezo.com/zr364xx/ W: http://royale.zerezo.com/zr364xx/
S: Maintained S: Maintained
F: Documentation/video4linux/zr364xx.txt F: Documentation/video4linux/zr364xx.txt
@ -8211,6 +8401,14 @@ L: linux-edac@vger.kernel.org
S: Maintained S: Maintained
F: arch/x86/kernel/cpu/mcheck/* F: arch/x86/kernel/cpu/mcheck/*
XC2028/3028 TUNER DRIVER
M: Mauro Carvalho Chehab <mchehab@redhat.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
S: Maintained
F: drivers/media/tuners/tuner-xc2028.*
XEN HYPERVISOR INTERFACE XEN HYPERVISOR INTERFACE
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
M: Jeremy Fitzhardinge <jeremy@goop.org> M: Jeremy Fitzhardinge <jeremy@goop.org>

10
arch/arm/mach-omap2/devices.c
View file

@ -200,6 +200,16 @@ static struct resource omap3isp_resources[] = {
.end = OMAP3630_ISP_CSI2C_REGS2_END, .end = OMAP3630_ISP_CSI2C_REGS2_END,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = OMAP343X_CTRL_BASE + OMAP343X_CONTROL_CSIRXFE,
.end = OMAP343X_CTRL_BASE + OMAP343X_CONTROL_CSIRXFE + 3,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP343X_CTRL_BASE + OMAP3630_CONTROL_CAMERA_PHY_CTRL,
.end = OMAP343X_CTRL_BASE + OMAP3630_CONTROL_CAMERA_PHY_CTRL + 3,
.flags = IORESOURCE_MEM,
},
{ {
.start = 24 + OMAP_INTC_START, .start = 24 + OMAP_INTC_START,
.flags = IORESOURCE_IRQ, .flags = IORESOURCE_IRQ,

6
arch/arm/mach-pxa/pcm990-baseboard.c
View file

@ -26,6 +26,7 @@
#include <linux/i2c/pxa-i2c.h> #include <linux/i2c/pxa-i2c.h>
#include <linux/pwm_backlight.h> #include <linux/pwm_backlight.h>
#include <media/mt9v022.h>
#include <media/soc_camera.h> #include <media/soc_camera.h>
#include <linux/platform_data/camera-pxa.h> #include <linux/platform_data/camera-pxa.h>
@ -468,6 +469,10 @@ static struct i2c_board_info __initdata pcm990_i2c_devices[] = {
}, },
}; };
static struct mt9v022_platform_data mt9v022_pdata = {
.y_skip_top = 1,
};
static struct i2c_board_info pcm990_camera_i2c[] = { static struct i2c_board_info pcm990_camera_i2c[] = {
{ {
I2C_BOARD_INFO("mt9v022", 0x48), I2C_BOARD_INFO("mt9v022", 0x48),
@ -480,6 +485,7 @@ static struct soc_camera_link iclink[] = {
{ {
.bus_id = 0, /* Must match with the camera ID */ .bus_id = 0, /* Must match with the camera ID */
.board_info = &pcm990_camera_i2c[0], .board_info = &pcm990_camera_i2c[0],
.priv = &mt9v022_pdata,
.i2c_adapter_id = 0, .i2c_adapter_id = 0,
.query_bus_param = pcm990_camera_query_bus_param, .query_bus_param = pcm990_camera_query_bus_param,
.set_bus_param = pcm990_camera_set_bus_param, .set_bus_param = pcm990_camera_set_bus_param,

4
drivers/base/dma-mapping.c
View file

@ -218,6 +218,8 @@ void dmam_release_declared_memory(struct device *dev)
} }
EXPORT_SYMBOL(dmam_release_declared_memory); EXPORT_SYMBOL(dmam_release_declared_memory);
#endif
/* /*
* Create scatter-list for the already allocated DMA buffer. * Create scatter-list for the already allocated DMA buffer.
*/ */
@ -236,8 +238,6 @@ int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
} }
EXPORT_SYMBOL(dma_common_get_sgtable); EXPORT_SYMBOL(dma_common_get_sgtable);
#endif
/* /*
* Create userspace mapping for the DMA-coherent memory. * Create userspace mapping for the DMA-coherent memory.
*/ */

2
drivers/hid/hid-picolcd_cir.c
View file

@ -116,7 +116,7 @@ int picolcd_init_cir(struct picolcd_data *data, struct hid_report *report)
rdev->priv = data; rdev->priv = data;
rdev->driver_type = RC_DRIVER_IR_RAW; rdev->driver_type = RC_DRIVER_IR_RAW;
rdev->allowed_protos = RC_TYPE_ALL; rdev->allowed_protos = RC_BIT_ALL;
rdev->open = picolcd_cir_open; rdev->open = picolcd_cir_open;
rdev->close = picolcd_cir_close; rdev->close = picolcd_cir_close;
rdev->input_name = data->hdev->name; rdev->input_name = data->hdev->name;

7
drivers/media/common/Kconfig
View file

@ -1,3 +1,10 @@
# Used by common drivers, when they need to ask questions
config MEDIA_COMMON_OPTIONS
bool
comment "common driver options"
depends on MEDIA_COMMON_OPTIONS
source "drivers/media/common/b2c2/Kconfig" source "drivers/media/common/b2c2/Kconfig"
source "drivers/media/common/saa7146/Kconfig" source "drivers/media/common/saa7146/Kconfig"
source "drivers/media/common/siano/Kconfig" source "drivers/media/common/siano/Kconfig"

5
drivers/media/common/b2c2/Kconfig
View file

@ -17,11 +17,6 @@ config DVB_B2C2_FLEXCOP
select DVB_CX24123 if MEDIA_SUBDRV_AUTOSELECT select DVB_CX24123 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT
select DVB_TUNER_CX24113 if MEDIA_SUBDRV_AUTOSELECT select DVB_TUNER_CX24113 if MEDIA_SUBDRV_AUTOSELECT
help
Support for the digital TV receiver chip made by B2C2 Inc. included in
Technisats PCI cards and USB boxes.
Say Y if you own such a device and want to use it.
# Selected via the PCI or USB flexcop drivers # Selected via the PCI or USB flexcop drivers
config DVB_B2C2_FLEXCOP_DEBUG config DVB_B2C2_FLEXCOP_DEBUG

18
drivers/media/common/siano/Kconfig
View file

@ -4,14 +4,16 @@
config SMS_SIANO_MDTV config SMS_SIANO_MDTV
tristate tristate
depends on DVB_CORE && RC_CORE && HAS_DMA depends on DVB_CORE && HAS_DMA
depends on !RC_CORE || RC_CORE
depends on SMS_USB_DRV || SMS_SDIO_DRV depends on SMS_USB_DRV || SMS_SDIO_DRV
default y default y
config SMS_SIANO_RC
bool "Enable Remote Controller support for Siano devices"
depends on SMS_SIANO_MDTV && RC_CORE
depends on SMS_USB_DRV || SMS_SDIO_DRV
depends on MEDIA_COMMON_OPTIONS
default y
---help--- ---help---
Choose Y or M here if you have MDTV receiver with a Siano chipset. Choose Y to select Remote Controller support for Siano driver.
To compile this driver as a module, choose M here
(The module will be called smsmdtv).
Further documentation on this driver can be found on the WWW
at http://www.siano-ms.com/

6
drivers/media/common/siano/Makefile
View file

@ -1,7 +1,11 @@
smsmdtv-objs := smscoreapi.o sms-cards.o smsendian.o smsir.o smsmdtv-objs := smscoreapi.o sms-cards.o smsendian.o
obj-$(CONFIG_SMS_SIANO_MDTV) += smsmdtv.o smsdvb.o obj-$(CONFIG_SMS_SIANO_MDTV) += smsmdtv.o smsdvb.o
ifeq ($(CONFIG_SMS_SIANO_RC),y)
smsmdtv-objs += smsir.o
endif
ccflags-y += -Idrivers/media/dvb-core ccflags-y += -Idrivers/media/dvb-core
ccflags-y += $(extra-cflags-y) $(extra-cflags-m) ccflags-y += $(extra-cflags-y) $(extra-cflags-m)

2
drivers/media/common/siano/smscoreapi.c
View file

@ -1092,7 +1092,7 @@ EXPORT_SYMBOL_GPL(smscore_onresponse);
* @return pointer to descriptor on success, NULL on error. * @return pointer to descriptor on success, NULL on error.
*/ */
struct smscore_buffer_t *get_entry(struct smscore_device_t *coredev) static struct smscore_buffer_t *get_entry(struct smscore_device_t *coredev)
{ {
struct smscore_buffer_t *cb = NULL; struct smscore_buffer_t *cb = NULL;
unsigned long flags; unsigned long flags;

2
drivers/media/common/siano/smsir.c
View file

@ -88,7 +88,7 @@ int sms_ir_init(struct smscore_device_t *coredev)
dev->priv = coredev; dev->priv = coredev;
dev->driver_type = RC_DRIVER_IR_RAW; dev->driver_type = RC_DRIVER_IR_RAW;
dev->allowed_protos = RC_TYPE_ALL; dev->allowed_protos = RC_BIT_ALL;
dev->map_name = sms_get_board(board_id)->rc_codes; dev->map_name = sms_get_board(board_id)->rc_codes;
dev->driver_name = MODULE_NAME; dev->driver_name = MODULE_NAME;

9
drivers/media/common/siano/smsir.h
View file

@ -46,10 +46,19 @@ struct ir_t {
u32 controller; u32 controller;
}; };
#ifdef CONFIG_SMS_SIANO_RC
int sms_ir_init(struct smscore_device_t *coredev); int sms_ir_init(struct smscore_device_t *coredev);
void sms_ir_exit(struct smscore_device_t *coredev); void sms_ir_exit(struct smscore_device_t *coredev);
void sms_ir_event(struct smscore_device_t *coredev, void sms_ir_event(struct smscore_device_t *coredev,
const char *buf, int len); const char *buf, int len);
#else
inline static int sms_ir_init(struct smscore_device_t *coredev) {
return 0;
}
inline static void sms_ir_exit(struct smscore_device_t *coredev) {};
inline static void sms_ir_event(struct smscore_device_t *coredev,
const char *buf, int len) {};
#endif
#endif /* __SMS_IR_H__ */ #endif /* __SMS_IR_H__ */

2
drivers/media/dvb-core/dmxdev.c
View file

@ -877,7 +877,7 @@ static int dvb_dmxdev_pes_filter_set(struct dmxdev *dmxdev,
dvb_dmxdev_filter_stop(dmxdevfilter); dvb_dmxdev_filter_stop(dmxdevfilter);
dvb_dmxdev_filter_reset(dmxdevfilter); dvb_dmxdev_filter_reset(dmxdevfilter);
if (params->pes_type > DMX_PES_OTHER || params->pes_type < 0) if ((unsigned)params->pes_type > DMX_PES_OTHER)
return -EINVAL; return -EINVAL;
dmxdevfilter->type = DMXDEV_TYPE_PES; dmxdevfilter->type = DMXDEV_TYPE_PES;

1
drivers/media/dvb-core/dmxdev.h
View file

@ -26,6 +26,7 @@
#include <linux/types.h> #include <linux/types.h>
#include <linux/spinlock.h> #include <linux/spinlock.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/time.h>
#include <linux/timer.h> #include <linux/timer.h>
#include <linux/wait.h> #include <linux/wait.h>
#include <linux/fs.h> #include <linux/fs.h>

1
drivers/media/dvb-core/dvb-usb-ids.h
View file

@ -250,6 +250,7 @@
#define USB_PID_TERRATEC_T3 0x10a0 #define USB_PID_TERRATEC_T3 0x10a0
#define USB_PID_TERRATEC_T5 0x10a1 #define USB_PID_TERRATEC_T5 0x10a1
#define USB_PID_NOXON_DAB_STICK 0x00b3 #define USB_PID_NOXON_DAB_STICK 0x00b3
#define USB_PID_NOXON_DAB_STICK_REV2 0x00e0
#define USB_PID_PINNACLE_EXPRESSCARD_320CX 0x022e #define USB_PID_PINNACLE_EXPRESSCARD_320CX 0x022e
#define USB_PID_PINNACLE_PCTV2000E 0x022c #define USB_PID_PINNACLE_PCTV2000E 0x022c
#define USB_PID_PINNACLE_PCTV_DVB_T_FLASH 0x0228 #define USB_PID_PINNACLE_PCTV_DVB_T_FLASH 0x0228

10
drivers/media/dvb-core/dvb_frontend.c
View file

@ -1029,12 +1029,6 @@ static struct dtv_cmds_h dtv_cmds[DTV_MAX_COMMAND + 1] = {
/* Get */ /* Get */
_DTV_CMD(DTV_DISEQC_SLAVE_REPLY, 0, 1), _DTV_CMD(DTV_DISEQC_SLAVE_REPLY, 0, 1),
_DTV_CMD(DTV_API_VERSION, 0, 0), _DTV_CMD(DTV_API_VERSION, 0, 0),
_DTV_CMD(DTV_CODE_RATE_HP, 0, 0),
_DTV_CMD(DTV_CODE_RATE_LP, 0, 0),
_DTV_CMD(DTV_GUARD_INTERVAL, 0, 0),
_DTV_CMD(DTV_TRANSMISSION_MODE, 0, 0),
_DTV_CMD(DTV_HIERARCHY, 0, 0),
_DTV_CMD(DTV_INTERLEAVING, 0, 0),
_DTV_CMD(DTV_ENUM_DELSYS, 0, 0), _DTV_CMD(DTV_ENUM_DELSYS, 0, 0),
@ -1042,13 +1036,11 @@ static struct dtv_cmds_h dtv_cmds[DTV_MAX_COMMAND + 1] = {
_DTV_CMD(DTV_ATSCMH_RS_FRAME_ENSEMBLE, 1, 0), _DTV_CMD(DTV_ATSCMH_RS_FRAME_ENSEMBLE, 1, 0),
_DTV_CMD(DTV_ATSCMH_FIC_VER, 0, 0), _DTV_CMD(DTV_ATSCMH_FIC_VER, 0, 0),
_DTV_CMD(DTV_ATSCMH_PARADE_ID, 0, 0),
_DTV_CMD(DTV_ATSCMH_NOG, 0, 0), _DTV_CMD(DTV_ATSCMH_NOG, 0, 0),
_DTV_CMD(DTV_ATSCMH_TNOG, 0, 0), _DTV_CMD(DTV_ATSCMH_TNOG, 0, 0),
_DTV_CMD(DTV_ATSCMH_SGN, 0, 0), _DTV_CMD(DTV_ATSCMH_SGN, 0, 0),
_DTV_CMD(DTV_ATSCMH_PRC, 0, 0), _DTV_CMD(DTV_ATSCMH_PRC, 0, 0),
_DTV_CMD(DTV_ATSCMH_RS_FRAME_MODE, 0, 0), _DTV_CMD(DTV_ATSCMH_RS_FRAME_MODE, 0, 0),
_DTV_CMD(DTV_ATSCMH_RS_FRAME_ENSEMBLE, 0, 0),
_DTV_CMD(DTV_ATSCMH_RS_CODE_MODE_PRI, 0, 0), _DTV_CMD(DTV_ATSCMH_RS_CODE_MODE_PRI, 0, 0),
_DTV_CMD(DTV_ATSCMH_RS_CODE_MODE_SEC, 0, 0), _DTV_CMD(DTV_ATSCMH_RS_CODE_MODE_SEC, 0, 0),
_DTV_CMD(DTV_ATSCMH_SCCC_BLOCK_MODE, 0, 0), _DTV_CMD(DTV_ATSCMH_SCCC_BLOCK_MODE, 0, 0),
@ -1056,8 +1048,6 @@ static struct dtv_cmds_h dtv_cmds[DTV_MAX_COMMAND + 1] = {
_DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_B, 0, 0), _DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_B, 0, 0),
_DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_C, 0, 0), _DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_C, 0, 0),
_DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_D, 0, 0), _DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_D, 0, 0),
_DTV_CMD(DTV_LNA, 0, 0),
}; };
static void dtv_property_dump(struct dvb_frontend *fe, struct dtv_property *tvp) static void dtv_property_dump(struct dvb_frontend *fe, struct dtv_property *tvp)

4
drivers/media/dvb-frontends/cx22700.c
View file

@ -139,7 +139,7 @@ static int cx22700_set_tps(struct cx22700_state *state,
if (p->code_rate_HP == FEC_4_5 || p->code_rate_LP == FEC_4_5) if (p->code_rate_HP == FEC_4_5 || p->code_rate_LP == FEC_4_5)
return -EINVAL; return -EINVAL;
if (p->guard_interval < GUARD_INTERVAL_1_32 || if ((int)p->guard_interval < GUARD_INTERVAL_1_32 ||
p->guard_interval > GUARD_INTERVAL_1_4) p->guard_interval > GUARD_INTERVAL_1_4)
return -EINVAL; return -EINVAL;
@ -152,7 +152,7 @@ static int cx22700_set_tps(struct cx22700_state *state,
p->modulation != QAM_64) p->modulation != QAM_64)
return -EINVAL; return -EINVAL;
if (p->hierarchy < HIERARCHY_NONE || if ((int)p->hierarchy < HIERARCHY_NONE ||
p->hierarchy > HIERARCHY_4) p->hierarchy > HIERARCHY_4)
return -EINVAL; return -EINVAL;

2
drivers/media/dvb-frontends/cx24123.c
View file

@ -338,7 +338,7 @@ static int cx24123_set_fec(struct cx24123_state *state, fe_code_rate_t fec)
{ {
u8 nom_reg = cx24123_readreg(state, 0x0e) & ~0x07; u8 nom_reg = cx24123_readreg(state, 0x0e) & ~0x07;
if ((fec < FEC_NONE) || (fec > FEC_AUTO)) if (((int)fec < FEC_NONE) || (fec > FEC_AUTO))
fec = FEC_AUTO; fec = FEC_AUTO;
/* Set the soft decision threshold */ /* Set the soft decision threshold */

2
drivers/media/dvb-frontends/dib9000.h
View file

@ -97,7 +97,7 @@ static inline int dib9000_set_slave_frontend(struct dvb_frontend *fe, struct dvb
return -ENODEV; return -ENODEV;
} }
int dib9000_remove_slave_frontend(struct dvb_frontend *fe) static inline int dib9000_remove_slave_frontend(struct dvb_frontend *fe)
{ {
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
return -ENODEV; return -ENODEV;

8
drivers/media/dvb-frontends/drxd_hard.c
View file

@ -1748,7 +1748,8 @@ static int DRX_Stop(struct drxd_state *state)
return status; return status;
} }
int SetOperationMode(struct drxd_state *state, int oMode) #if 0 /* Currently unused */
static int SetOperationMode(struct drxd_state *state, int oMode)
{ {
int status; int status;
@ -1788,6 +1789,7 @@ int SetOperationMode(struct drxd_state *state, int oMode)
state->operation_mode = oMode; state->operation_mode = oMode;
return status; return status;
} }
#endif
static int StartDiversity(struct drxd_state *state) static int StartDiversity(struct drxd_state *state)
{ {
@ -2612,7 +2614,7 @@ static int CDRXD(struct drxd_state *state, u32 IntermediateFrequency)
return 0; return 0;
} }
int DRXD_init(struct drxd_state *state, const u8 * fw, u32 fw_size) static int DRXD_init(struct drxd_state *state, const u8 *fw, u32 fw_size)
{ {
int status = 0; int status = 0;
u32 driverVersion; u32 driverVersion;
@ -2774,7 +2776,7 @@ int DRXD_init(struct drxd_state *state, const u8 * fw, u32 fw_size)
return status; return status;
} }
int DRXD_status(struct drxd_state *state, u32 * pLockStatus) static int DRXD_status(struct drxd_state *state, u32 *pLockStatus)
{ {
DRX_GetLockStatus(state, pLockStatus); DRX_GetLockStatus(state, pLockStatus);

24
drivers/media/dvb-frontends/drxk_hard.c
View file

@ -65,16 +65,6 @@ static bool IsQAM(struct drxk_state *state)
state->m_OperationMode == OM_QAM_ITU_C; state->m_OperationMode == OM_QAM_ITU_C;
} }
bool IsA1WithPatchCode(struct drxk_state *state)
{
return state->m_DRXK_A1_PATCH_CODE;
}
bool IsA1WithRomCode(struct drxk_state *state)
{
return state->m_DRXK_A1_ROM_CODE;
}
#define NOA1ROM 0 #define NOA1ROM 0
#define DRXDAP_FASI_SHORT_FORMAT(addr) (((addr) & 0xFC30FF80) == 0) #define DRXDAP_FASI_SHORT_FORMAT(addr) (((addr) & 0xFC30FF80) == 0)
@ -189,7 +179,7 @@ static inline u32 MulDiv32(u32 a, u32 b, u32 c)
return (u32) tmp64; return (u32) tmp64;
} }
inline u32 Frac28a(u32 a, u32 c) static inline u32 Frac28a(u32 a, u32 c)
{ {
int i = 0; int i = 0;
u32 Q1 = 0; u32 Q1 = 0;
@ -587,7 +577,7 @@ static int write_block(struct drxk_state *state, u32 Address,
#define DRXK_MAX_RETRIES_POWERUP 20 #define DRXK_MAX_RETRIES_POWERUP 20
#endif #endif
int PowerUpDevice(struct drxk_state *state) static int PowerUpDevice(struct drxk_state *state)
{ {
int status; int status;
u8 data = 0; u8 data = 0;
@ -720,11 +710,6 @@ static int init_state(struct drxk_state *state)
state->m_bPowerDown = (ulPowerDown != 0); state->m_bPowerDown = (ulPowerDown != 0);
state->m_DRXK_A1_PATCH_CODE = false;
state->m_DRXK_A1_ROM_CODE = false;
state->m_DRXK_A2_ROM_CODE = false;
state->m_DRXK_A3_ROM_CODE = false;
state->m_DRXK_A2_PATCH_CODE = false;
state->m_DRXK_A3_PATCH_CODE = false; state->m_DRXK_A3_PATCH_CODE = false;
/* Init AGC and PGA parameters */ /* Init AGC and PGA parameters */
@ -921,7 +906,7 @@ static int GetDeviceCapabilities(struct drxk_state *state)
status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
if (status < 0) if (status < 0)
goto error; goto error;
status = write16(state, SIO_TOP_COMM_KEY__A, 0xFABA); status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY);
if (status < 0) if (status < 0)
goto error; goto error;
status = read16(state, SIO_PDR_OHW_CFG__A, &sioPdrOhwCfg); status = read16(state, SIO_PDR_OHW_CFG__A, &sioPdrOhwCfg);
@ -1217,7 +1202,7 @@ static int MPEGTSConfigurePins(struct drxk_state *state, bool mpegEnable)
goto error; goto error;
/* MPEG TS pad configuration */ /* MPEG TS pad configuration */
status = write16(state, SIO_TOP_COMM_KEY__A, 0xFABA); status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY);
if (status < 0) if (status < 0)
goto error; goto error;
@ -5461,6 +5446,7 @@ static int QAMDemodulatorCommand(struct drxk_state *state,
} else { } else {
printk(KERN_WARNING "drxk: Unknown QAM demodulator parameter " printk(KERN_WARNING "drxk: Unknown QAM demodulator parameter "
"count %d\n", numberOfParameters); "count %d\n", numberOfParameters);
status = -EINVAL;
} }
error: error:

4
drivers/media/dvb-frontends/drxk_hard.h
View file

@ -320,11 +320,7 @@ struct drxk_state {
u8 *m_microcode; u8 *m_microcode;
int m_microcode_length; int m_microcode_length;
bool m_DRXK_A1_PATCH_CODE;
bool m_DRXK_A1_ROM_CODE;
bool m_DRXK_A2_ROM_CODE;
bool m_DRXK_A3_ROM_CODE; bool m_DRXK_A3_ROM_CODE;
bool m_DRXK_A2_PATCH_CODE;
bool m_DRXK_A3_PATCH_CODE; bool m_DRXK_A3_PATCH_CODE;
bool m_rfmirror; bool m_rfmirror;

15
drivers/media/dvb-frontends/ds3000.c
View file

@ -30,7 +30,6 @@
#include "ds3000.h" #include "ds3000.h"
static int debug; static int debug;
static int force_fw_upload;
#define dprintk(args...) \ #define dprintk(args...) \
do { \ do { \
@ -234,7 +233,6 @@ struct ds3000_state {
struct i2c_adapter *i2c; struct i2c_adapter *i2c;
const struct ds3000_config *config; const struct ds3000_config *config;
struct dvb_frontend frontend; struct dvb_frontend frontend;
u8 skip_fw_load;
/* previous uncorrected block counter for DVB-S2 */ /* previous uncorrected block counter for DVB-S2 */
u16 prevUCBS2; u16 prevUCBS2;
}; };
@ -397,9 +395,6 @@ static int ds3000_firmware_ondemand(struct dvb_frontend *fe)
if (ret < 0) if (ret < 0)
return ret; return ret;
if (state->skip_fw_load || !force_fw_upload)
return 0; /* Firmware already uploaded, skipping */
/* Load firmware */ /* Load firmware */
/* request the firmware, this will block until someone uploads it */ /* request the firmware, this will block until someone uploads it */
printk(KERN_INFO "%s: Waiting for firmware upload (%s)...\n", __func__, printk(KERN_INFO "%s: Waiting for firmware upload (%s)...\n", __func__,
@ -413,9 +408,6 @@ static int ds3000_firmware_ondemand(struct dvb_frontend *fe)
return ret; return ret;
} }
/* Make sure we don't recurse back through here during loading */
state->skip_fw_load = 1;
ret = ds3000_load_firmware(fe, fw); ret = ds3000_load_firmware(fe, fw);
if (ret) if (ret)
printk("%s: Writing firmware to device failed\n", __func__); printk("%s: Writing firmware to device failed\n", __func__);
@ -425,9 +417,6 @@ static int ds3000_firmware_ondemand(struct dvb_frontend *fe)
dprintk("%s: Firmware upload %s\n", __func__, dprintk("%s: Firmware upload %s\n", __func__,
ret == 0 ? "complete" : "failed"); ret == 0 ? "complete" : "failed");
/* Ensure firmware is always loaded if required */
state->skip_fw_load = 0;
return ret; return ret;
} }
@ -1309,10 +1298,8 @@ static struct dvb_frontend_ops ds3000_ops = {
module_param(debug, int, 0644); module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
module_param(force_fw_upload, int, 0644);
MODULE_PARM_DESC(force_fw_upload, "Force firmware upload (default:0)");
MODULE_DESCRIPTION("DVB Frontend module for Montage Technology " MODULE_DESCRIPTION("DVB Frontend module for Montage Technology "
"DS3000/TS2020 hardware"); "DS3000/TS2020 hardware");
MODULE_AUTHOR("Konstantin Dimitrov"); MODULE_AUTHOR("Konstantin Dimitrov");
MODULE_LICENSE("GPL"); MODULE_LICENSE("GPL");
MODULE_FIRMWARE(DS3000_DEFAULT_FIRMWARE);

4
drivers/media/dvb-frontends/l64781.c
View file

@ -180,11 +180,11 @@ static int apply_frontend_param(struct dvb_frontend *fe)
p->transmission_mode != TRANSMISSION_MODE_8K) p->transmission_mode != TRANSMISSION_MODE_8K)
return -EINVAL; return -EINVAL;
if (p->guard_interval < GUARD_INTERVAL_1_32 || if ((int)p->guard_interval < GUARD_INTERVAL_1_32 ||
p->guard_interval > GUARD_INTERVAL_1_4) p->guard_interval > GUARD_INTERVAL_1_4)
return -EINVAL; return -EINVAL;
if (p->hierarchy < HIERARCHY_NONE || if ((int)p->hierarchy < HIERARCHY_NONE ||
p->hierarchy > HIERARCHY_4) p->hierarchy > HIERARCHY_4)
return -EINVAL; return -EINVAL;

4
drivers/media/dvb-frontends/mt312.c
View file

@ -549,7 +549,7 @@ static int mt312_set_frontend(struct dvb_frontend *fe)
|| (p->frequency > fe->ops.info.frequency_max)) || (p->frequency > fe->ops.info.frequency_max))
return -EINVAL; return -EINVAL;
if ((p->inversion < INVERSION_OFF) if (((int)p->inversion < INVERSION_OFF)
|| (p->inversion > INVERSION_ON)) || (p->inversion > INVERSION_ON))
return -EINVAL; return -EINVAL;
@ -557,7 +557,7 @@ static int mt312_set_frontend(struct dvb_frontend *fe)
|| (p->symbol_rate > fe->ops.info.symbol_rate_max)) || (p->symbol_rate > fe->ops.info.symbol_rate_max))
return -EINVAL; return -EINVAL;
if ((p->fec_inner < FEC_NONE) if (((int)p->fec_inner < FEC_NONE)
|| (p->fec_inner > FEC_AUTO)) || (p->fec_inner > FEC_AUTO))
return -EINVAL; return -EINVAL;

6
drivers/media/dvb-frontends/rtl2830.c
View file

@ -130,7 +130,7 @@ static int rtl2830_rd_reg(struct rtl2830_priv *priv, u16 reg, u8 *val)
} }
/* write single register with mask */ /* write single register with mask */
int rtl2830_wr_reg_mask(struct rtl2830_priv *priv, u16 reg, u8 val, u8 mask) static int rtl2830_wr_reg_mask(struct rtl2830_priv *priv, u16 reg, u8 val, u8 mask)
{ {
int ret; int ret;
u8 tmp; u8 tmp;
@ -150,7 +150,7 @@ int rtl2830_wr_reg_mask(struct rtl2830_priv *priv, u16 reg, u8 val, u8 mask)
} }
/* read single register with mask */ /* read single register with mask */
int rtl2830_rd_reg_mask(struct rtl2830_priv *priv, u16 reg, u8 *val, u8 mask) static int rtl2830_rd_reg_mask(struct rtl2830_priv *priv, u16 reg, u8 *val, u8 mask)
{ {
int ret, i; int ret, i;
u8 tmp; u8 tmp;
@ -256,7 +256,7 @@ static int rtl2830_sleep(struct dvb_frontend *fe)
return 0; return 0;
} }
int rtl2830_get_tune_settings(struct dvb_frontend *fe, static int rtl2830_get_tune_settings(struct dvb_frontend *fe,
struct dvb_frontend_tune_settings *s) struct dvb_frontend_tune_settings *s)
{ {
s->min_delay_ms = 500; s->min_delay_ms = 500;

6
drivers/media/dvb-frontends/rtl2832.c
View file

@ -265,7 +265,7 @@ static int rtl2832_rd_reg(struct rtl2832_priv *priv, u8 reg, u8 page, u8 *val)
return rtl2832_rd_regs(priv, reg, page, val, 1); return rtl2832_rd_regs(priv, reg, page, val, 1);
} }
int rtl2832_rd_demod_reg(struct rtl2832_priv *priv, int reg, u32 *val) static int rtl2832_rd_demod_reg(struct rtl2832_priv *priv, int reg, u32 *val)
{ {
int ret; int ret;
@ -305,7 +305,7 @@ err:
} }
int rtl2832_wr_demod_reg(struct rtl2832_priv *priv, int reg, u32 val) static int rtl2832_wr_demod_reg(struct rtl2832_priv *priv, int reg, u32 val)
{ {
int ret, i; int ret, i;
u8 len; u8 len;
@ -510,7 +510,7 @@ static int rtl2832_sleep(struct dvb_frontend *fe)
return 0; return 0;
} }
int rtl2832_get_tune_settings(struct dvb_frontend *fe, static int rtl2832_get_tune_settings(struct dvb_frontend *fe,
struct dvb_frontend_tune_settings *s) struct dvb_frontend_tune_settings *s)
{ {
struct rtl2832_priv *priv = fe->demodulator_priv; struct rtl2832_priv *priv = fe->demodulator_priv;

2
drivers/media/dvb-frontends/stb0899_drv.c
View file

@ -1260,7 +1260,7 @@ static inline void CONVERT32(u32 x, char *str)
*str = '\0'; *str = '\0';
} }
int stb0899_get_dev_id(struct stb0899_state *state) static int stb0899_get_dev_id(struct stb0899_state *state)
{ {
u8 chip_id, release; u8 chip_id, release;
u16 id; u16 id;

15
drivers/media/dvb-frontends/stv0367.c
View file

@ -879,7 +879,8 @@ static u8 stv0367_readbits(struct stv0367_state *state, u32 label)
return val; return val;
} }
u8 stv0367_getbits(u8 reg, u32 label) #if 0 /* Currently, unused */
static u8 stv0367_getbits(u8 reg, u32 label)
{ {
u8 mask, pos; u8 mask, pos;
@ -887,7 +888,7 @@ u8 stv0367_getbits(u8 reg, u32 label)
return (reg & mask) >> pos; return (reg & mask) >> pos;
} }
#endif
static int stv0367ter_gate_ctrl(struct dvb_frontend *fe, int enable) static int stv0367ter_gate_ctrl(struct dvb_frontend *fe, int enable)
{ {
struct stv0367_state *state = fe->demodulator_priv; struct stv0367_state *state = fe->demodulator_priv;
@ -1263,8 +1264,8 @@ stv0367_ter_signal_type stv0367ter_check_cpamp(struct stv0367_state *state,
return CPAMPStatus; return CPAMPStatus;
} }
enum static enum stv0367_ter_signal_type
stv0367_ter_signal_type stv0367ter_lock_algo(struct stv0367_state *state) stv0367ter_lock_algo(struct stv0367_state *state)
{ {
enum stv0367_ter_signal_type ret_flag; enum stv0367_ter_signal_type ret_flag;
short int wd, tempo; short int wd, tempo;
@ -1528,7 +1529,7 @@ static int stv0367ter_sleep(struct dvb_frontend *fe)
return stv0367ter_standby(fe, 1); return stv0367ter_standby(fe, 1);
} }
int stv0367ter_init(struct dvb_frontend *fe) static int stv0367ter_init(struct dvb_frontend *fe)
{ {
struct stv0367_state *state = fe->demodulator_priv; struct stv0367_state *state = fe->demodulator_priv;
struct stv0367ter_state *ter_state = state->ter_state; struct stv0367ter_state *ter_state = state->ter_state;
@ -2378,7 +2379,7 @@ static u32 stv0367cab_get_adc_freq(struct dvb_frontend *fe, u32 ExtClk_Hz)
return ADCClk_Hz; return ADCClk_Hz;
} }
enum stv0367cab_mod stv0367cab_SetQamSize(struct stv0367_state *state, static enum stv0367cab_mod stv0367cab_SetQamSize(struct stv0367_state *state,
u32 SymbolRate, u32 SymbolRate,
enum stv0367cab_mod QAMSize) enum stv0367cab_mod QAMSize)
{ {
@ -2762,7 +2763,7 @@ static int stv0367cab_sleep(struct dvb_frontend *fe)
return stv0367cab_standby(fe, 1); return stv0367cab_standby(fe, 1);
} }
int stv0367cab_init(struct dvb_frontend *fe) static int stv0367cab_init(struct dvb_frontend *fe)
{ {
struct stv0367_state *state = fe->demodulator_priv; struct stv0367_state *state = fe->demodulator_priv;
struct stv0367cab_state *cab_state = state->cab_state; struct stv0367cab_state *cab_state = state->cab_state;

6
drivers/media/dvb-frontends/tda10071.c
View file

@ -96,7 +96,8 @@ static int tda10071_rd_reg(struct tda10071_priv *priv, u8 reg, u8 *val)
} }
/* write single register with mask */ /* write single register with mask */
int tda10071_wr_reg_mask(struct tda10071_priv *priv, u8 reg, u8 val, u8 mask) static int tda10071_wr_reg_mask(struct tda10071_priv *priv,
u8 reg, u8 val, u8 mask)
{ {
int ret; int ret;
u8 tmp; u8 tmp;
@ -116,7 +117,8 @@ int tda10071_wr_reg_mask(struct tda10071_priv *priv, u8 reg, u8 val, u8 mask)
} }
/* read single register with mask */ /* read single register with mask */
int tda10071_rd_reg_mask(struct tda10071_priv *priv, u8 reg, u8 *val, u8 mask) static int tda10071_rd_reg_mask(struct tda10071_priv *priv,
u8 reg, u8 *val, u8 mask)
{ {
int ret, i; int ret, i;
u8 tmp; u8 tmp;

1
drivers/media/dvb-frontends/tda18271c2dd.c
View file

@ -32,6 +32,7 @@
#include <asm/div64.h> #include <asm/div64.h>
#include "dvb_frontend.h" #include "dvb_frontend.h"
#include "tda18271c2dd.h"
struct SStandardParam { struct SStandardParam {
s32 m_IFFrequency; s32 m_IFFrequency;

1
drivers/media/firewire/firedtv.h
View file

@ -13,6 +13,7 @@
#ifndef _FIREDTV_H #ifndef _FIREDTV_H
#define _FIREDTV_H #define _FIREDTV_H
#include <linux/time.h>
#include <linux/dvb/dmx.h> #include <linux/dvb/dmx.h>
#include <linux/dvb/frontend.h> #include <linux/dvb/frontend.h>
#include <linux/list.h> #include <linux/list.h>

4
drivers/media/i2c/adp1653.c
View file

@ -3,10 +3,10 @@
* *
* Copyright (C) 2008--2011 Nokia Corporation * Copyright (C) 2008--2011 Nokia Corporation
* *
* Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> * Contact: Sakari Ailus <sakari.ailus@iki.fi>
* *
* Contributors: * Contributors:
* Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> * Sakari Ailus <sakari.ailus@iki.fi>
* Tuukka Toivonen <tuukkat76@gmail.com> * Tuukka Toivonen <tuukkat76@gmail.com>
* *
* This program is free software; you can redistribute it and/or * This program is free software; you can redistribute it and/or

13
drivers/media/i2c/adv7183.c
View file

@ -681,18 +681,7 @@ static struct i2c_driver adv7183_driver = {
.id_table = adv7183_id, .id_table = adv7183_id,
}; };
static __init int adv7183_init(void) module_i2c_driver(adv7183_driver);
{
return i2c_add_driver(&adv7183_driver);
}
static __exit void adv7183_exit(void)
{
i2c_del_driver(&adv7183_driver);
}
module_init(adv7183_init);
module_exit(adv7183_exit);
MODULE_DESCRIPTION("Analog Devices ADV7183 video decoder driver"); MODULE_DESCRIPTION("Analog Devices ADV7183 video decoder driver");
MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>"); MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>");

14
drivers/media/i2c/adv7604.c
View file

@ -486,8 +486,18 @@ static inline int edid_read_block(struct v4l2_subdev *sd, unsigned len, u8 *val)
struct i2c_client *client = state->i2c_edid; struct i2c_client *client = state->i2c_edid;
u8 msgbuf0[1] = { 0 }; u8 msgbuf0[1] = { 0 };
u8 msgbuf1[256]; u8 msgbuf1[256];
struct i2c_msg msg[2] = { { client->addr, 0, 1, msgbuf0 }, struct i2c_msg msg[2] = {
{ client->addr, 0 | I2C_M_RD, len, msgbuf1 } {
.addr = client->addr,
.len = 1,
.buf = msgbuf0
},
{
.addr = client->addr,
.flags = I2C_M_RD,
.len = len,
.buf = msgbuf1
},
}; };
if (i2c_transfer(client->adapter, msg, 2) < 0) if (i2c_transfer(client->adapter, msg, 2) < 0)

2
drivers/media/i2c/cx25840/cx25840-core.c
View file

@ -2065,7 +2065,7 @@ static int cx25840_irq_handler(struct v4l2_subdev *sd, u32 status,
#define DIF_BPF_COEFF3435 (0x38c) #define DIF_BPF_COEFF3435 (0x38c)
#define DIF_BPF_COEFF36 (0x390) #define DIF_BPF_COEFF36 (0x390)
void cx23885_dif_setup(struct i2c_client *client, u32 ifHz) static void cx23885_dif_setup(struct i2c_client *client, u32 ifHz)
{ {
u64 pll_freq; u64 pll_freq;
u32 pll_freq_word; u32 pll_freq_word;

14
drivers/media/i2c/ir-kbd-i2c.c
View file

@ -284,7 +284,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
{ {
char *ir_codes = NULL; char *ir_codes = NULL;
const char *name = NULL; const char *name = NULL;
u64 rc_type = RC_TYPE_UNKNOWN; u64 rc_type = RC_BIT_UNKNOWN;
struct IR_i2c *ir; struct IR_i2c *ir;
struct rc_dev *rc = NULL; struct rc_dev *rc = NULL;
struct i2c_adapter *adap = client->adapter; struct i2c_adapter *adap = client->adapter;
@ -303,7 +303,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
case 0x64: case 0x64:
name = "Pixelview"; name = "Pixelview";
ir->get_key = get_key_pixelview; ir->get_key = get_key_pixelview;
rc_type = RC_TYPE_OTHER; rc_type = RC_BIT_OTHER;
ir_codes = RC_MAP_EMPTY; ir_codes = RC_MAP_EMPTY;
break; break;
case 0x18: case 0x18:
@ -311,31 +311,31 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
case 0x1a: case 0x1a:
name = "Hauppauge"; name = "Hauppauge";
ir->get_key = get_key_haup; ir->get_key = get_key_haup;
rc_type = RC_TYPE_RC5; rc_type = RC_BIT_RC5;
ir_codes = RC_MAP_HAUPPAUGE; ir_codes = RC_MAP_HAUPPAUGE;
break; break;
case 0x30: case 0x30:
name = "KNC One"; name = "KNC One";
ir->get_key = get_key_knc1; ir->get_key = get_key_knc1;
rc_type = RC_TYPE_OTHER; rc_type = RC_BIT_OTHER;
ir_codes = RC_MAP_EMPTY; ir_codes = RC_MAP_EMPTY;
break; break;
case 0x6b: case 0x6b:
name = "FusionHDTV"; name = "FusionHDTV";
ir->get_key = get_key_fusionhdtv; ir->get_key = get_key_fusionhdtv;
rc_type = RC_TYPE_RC5; rc_type = RC_BIT_RC5;
ir_codes = RC_MAP_FUSIONHDTV_MCE; ir_codes = RC_MAP_FUSIONHDTV_MCE;
break; break;
case 0x40: case 0x40:
name = "AVerMedia Cardbus remote"; name = "AVerMedia Cardbus remote";
ir->get_key = get_key_avermedia_cardbus; ir->get_key = get_key_avermedia_cardbus;
rc_type = RC_TYPE_OTHER; rc_type = RC_BIT_OTHER;
ir_codes = RC_MAP_AVERMEDIA_CARDBUS; ir_codes = RC_MAP_AVERMEDIA_CARDBUS;
break; break;
case 0x71: case 0x71:
name = "Hauppauge/Zilog Z8"; name = "Hauppauge/Zilog Z8";
ir->get_key = get_key_haup_xvr; ir->get_key = get_key_haup_xvr;
rc_type = RC_TYPE_RC5; rc_type = RC_BIT_RC5;
ir_codes = RC_MAP_HAUPPAUGE; ir_codes = RC_MAP_HAUPPAUGE;
break; break;
} }

2
drivers/media/i2c/s5k4ecgx.c
View file

@ -343,7 +343,7 @@ static int s5k4ecgx_load_firmware(struct v4l2_subdev *sd)
} }
regs_num = le32_to_cpu(get_unaligned_le32(fw->data)); regs_num = le32_to_cpu(get_unaligned_le32(fw->data));
v4l2_dbg(3, debug, sd, "FW: %s size %d register sets %d\n", v4l2_dbg(3, debug, sd, "FW: %s size %zu register sets %d\n",
S5K4ECGX_FIRMWARE, fw->size, regs_num); S5K4ECGX_FIRMWARE, fw->size, regs_num);
regs_num++; /* Add header */ regs_num++; /* Add header */

217
drivers/media/i2c/smiapp-pll.c
View file

@ -4,7 +4,7 @@
* Generic driver for SMIA/SMIA++ compliant camera modules * Generic driver for SMIA/SMIA++ compliant camera modules
* *
* Copyright (C) 2011--2012 Nokia Corporation * Copyright (C) 2011--2012 Nokia Corporation
* Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> * Contact: Sakari Ailus <sakari.ailus@iki.fi>
* *
* This program is free software; you can redistribute it and/or * This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License * modify it under the terms of the GNU General Public License
@ -58,7 +58,7 @@ static int bounds_check(struct device *dev, uint32_t val,
if (val >= min && val <= max) if (val >= min && val <= max)
return 0; return 0;
dev_warn(dev, "%s out of bounds: %d (%d--%d)\n", str, val, min, max); dev_dbg(dev, "%s out of bounds: %d (%d--%d)\n", str, val, min, max);
return -EINVAL; return -EINVAL;
} }
@ -87,14 +87,14 @@ static void print_pll(struct device *dev, struct smiapp_pll *pll)
dev_dbg(dev, "vt_pix_clk_freq_hz \t%d\n", pll->vt_pix_clk_freq_hz); dev_dbg(dev, "vt_pix_clk_freq_hz \t%d\n", pll->vt_pix_clk_freq_hz);
} }
int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits, static int __smiapp_pll_calculate(struct device *dev,
struct smiapp_pll *pll) const struct smiapp_pll_limits *limits,
struct smiapp_pll *pll, uint32_t mul,
uint32_t div, uint32_t lane_op_clock_ratio)
{ {
uint32_t sys_div; uint32_t sys_div;
uint32_t best_pix_div = INT_MAX >> 1; uint32_t best_pix_div = INT_MAX >> 1;
uint32_t vt_op_binning_div; uint32_t vt_op_binning_div;
uint32_t lane_op_clock_ratio;
uint32_t mul, div;
uint32_t more_mul_min, more_mul_max; uint32_t more_mul_min, more_mul_max;
uint32_t more_mul_factor; uint32_t more_mul_factor;
uint32_t min_vt_div, max_vt_div, vt_div; uint32_t min_vt_div, max_vt_div, vt_div;
@ -102,54 +102,6 @@ int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
unsigned int i; unsigned int i;
int rval; int rval;
if (pll->flags & SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE)
lane_op_clock_ratio = pll->lanes;
else
lane_op_clock_ratio = 1;
dev_dbg(dev, "lane_op_clock_ratio: %d\n", lane_op_clock_ratio);
dev_dbg(dev, "binning: %dx%d\n", pll->binning_horizontal,
pll->binning_vertical);
/* CSI transfers 2 bits per clock per lane; thus times 2 */
pll->pll_op_clk_freq_hz = pll->link_freq * 2
* (pll->lanes / lane_op_clock_ratio);
/* Figure out limits for pre-pll divider based on extclk */
dev_dbg(dev, "min / max pre_pll_clk_div: %d / %d\n",
limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
limits->max_pre_pll_clk_div =
min_t(uint16_t, limits->max_pre_pll_clk_div,
clk_div_even(pll->ext_clk_freq_hz /
limits->min_pll_ip_freq_hz));
limits->min_pre_pll_clk_div =
max_t(uint16_t, limits->min_pre_pll_clk_div,
clk_div_even_up(
DIV_ROUND_UP(pll->ext_clk_freq_hz,
limits->max_pll_ip_freq_hz)));
dev_dbg(dev, "pre-pll check: min / max pre_pll_clk_div: %d / %d\n",
limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
i = gcd(pll->pll_op_clk_freq_hz, pll->ext_clk_freq_hz);
mul = div_u64(pll->pll_op_clk_freq_hz, i);
div = pll->ext_clk_freq_hz / i;
dev_dbg(dev, "mul %d / div %d\n", mul, div);
limits->min_pre_pll_clk_div =
max_t(uint16_t, limits->min_pre_pll_clk_div,
clk_div_even_up(
DIV_ROUND_UP(mul * pll->ext_clk_freq_hz,
limits->max_pll_op_freq_hz)));
dev_dbg(dev, "pll_op check: min / max pre_pll_clk_div: %d / %d\n",
limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
if (limits->min_pre_pll_clk_div > limits->max_pre_pll_clk_div) {
dev_err(dev, "unable to compute pre_pll divisor\n");
return -EINVAL;
}
pll->pre_pll_clk_div = limits->min_pre_pll_clk_div;
/* /*
* Get pre_pll_clk_div so that our pll_op_clk_freq_hz won't be * Get pre_pll_clk_div so that our pll_op_clk_freq_hz won't be
* too high. * too high.
@ -162,7 +114,7 @@ int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
more_mul_max); more_mul_max);
/* Don't go above max pll op frequency. */ /* Don't go above max pll op frequency. */
more_mul_max = more_mul_max =
min_t(int, min_t(uint32_t,
more_mul_max, more_mul_max,
limits->max_pll_op_freq_hz limits->max_pll_op_freq_hz
/ (pll->ext_clk_freq_hz / pll->pre_pll_clk_div * mul)); / (pll->ext_clk_freq_hz / pll->pre_pll_clk_div * mul));
@ -170,7 +122,7 @@ int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
more_mul_max); more_mul_max);
/* Don't go above the division capability of op sys clock divider. */ /* Don't go above the division capability of op sys clock divider. */
more_mul_max = min(more_mul_max, more_mul_max = min(more_mul_max,
limits->max_op_sys_clk_div * pll->pre_pll_clk_div limits->op.max_sys_clk_div * pll->pre_pll_clk_div
/ div); / div);
dev_dbg(dev, "more_mul_max: max_op_sys_clk_div check: %d\n", dev_dbg(dev, "more_mul_max: max_op_sys_clk_div check: %d\n",
more_mul_max); more_mul_max);
@ -193,14 +145,14 @@ int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
more_mul_min); more_mul_min);
if (more_mul_min > more_mul_max) { if (more_mul_min > more_mul_max) {
dev_warn(dev, dev_dbg(dev,
"unable to compute more_mul_min and more_mul_max"); "unable to compute more_mul_min and more_mul_max\n");
return -EINVAL; return -EINVAL;
} }
more_mul_factor = lcm(div, pll->pre_pll_clk_div) / div; more_mul_factor = lcm(div, pll->pre_pll_clk_div) / div;
dev_dbg(dev, "more_mul_factor: %d\n", more_mul_factor); dev_dbg(dev, "more_mul_factor: %d\n", more_mul_factor);
more_mul_factor = lcm(more_mul_factor, limits->min_op_sys_clk_div); more_mul_factor = lcm(more_mul_factor, limits->op.min_sys_clk_div);
dev_dbg(dev, "more_mul_factor: min_op_sys_clk_div: %d\n", dev_dbg(dev, "more_mul_factor: min_op_sys_clk_div: %d\n",
more_mul_factor); more_mul_factor);
i = roundup(more_mul_min, more_mul_factor); i = roundup(more_mul_min, more_mul_factor);
@ -209,7 +161,7 @@ int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
dev_dbg(dev, "final more_mul: %d\n", i); dev_dbg(dev, "final more_mul: %d\n", i);
if (i > more_mul_max) { if (i > more_mul_max) {
dev_warn(dev, "final more_mul is bad, max %d", more_mul_max); dev_dbg(dev, "final more_mul is bad, max %d\n", more_mul_max);
return -EINVAL; return -EINVAL;
} }
@ -268,19 +220,19 @@ int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
dev_dbg(dev, "min_vt_div: %d\n", min_vt_div); dev_dbg(dev, "min_vt_div: %d\n", min_vt_div);
min_vt_div = max(min_vt_div, min_vt_div = max(min_vt_div,
DIV_ROUND_UP(pll->pll_op_clk_freq_hz, DIV_ROUND_UP(pll->pll_op_clk_freq_hz,
limits->max_vt_pix_clk_freq_hz)); limits->vt.max_pix_clk_freq_hz));
dev_dbg(dev, "min_vt_div: max_vt_pix_clk_freq_hz: %d\n", dev_dbg(dev, "min_vt_div: max_vt_pix_clk_freq_hz: %d\n",
min_vt_div); min_vt_div);
min_vt_div = max_t(uint32_t, min_vt_div, min_vt_div = max_t(uint32_t, min_vt_div,
limits->min_vt_pix_clk_div limits->vt.min_pix_clk_div
* limits->min_vt_sys_clk_div); * limits->vt.min_sys_clk_div);
dev_dbg(dev, "min_vt_div: min_vt_clk_div: %d\n", min_vt_div); dev_dbg(dev, "min_vt_div: min_vt_clk_div: %d\n", min_vt_div);
max_vt_div = limits->max_vt_sys_clk_div * limits->max_vt_pix_clk_div; max_vt_div = limits->vt.max_sys_clk_div * limits->vt.max_pix_clk_div;
dev_dbg(dev, "max_vt_div: %d\n", max_vt_div); dev_dbg(dev, "max_vt_div: %d\n", max_vt_div);
max_vt_div = min(max_vt_div, max_vt_div = min(max_vt_div,
DIV_ROUND_UP(pll->pll_op_clk_freq_hz, DIV_ROUND_UP(pll->pll_op_clk_freq_hz,
limits->min_vt_pix_clk_freq_hz)); limits->vt.min_pix_clk_freq_hz));
dev_dbg(dev, "max_vt_div: min_vt_pix_clk_freq_hz: %d\n", dev_dbg(dev, "max_vt_div: min_vt_pix_clk_freq_hz: %d\n",
max_vt_div); max_vt_div);
@ -288,28 +240,28 @@ int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
* Find limitsits for sys_clk_div. Not all values are possible * Find limitsits for sys_clk_div. Not all values are possible
* with all values of pix_clk_div. * with all values of pix_clk_div.
*/ */
min_sys_div = limits->min_vt_sys_clk_div; min_sys_div = limits->vt.min_sys_clk_div;
dev_dbg(dev, "min_sys_div: %d\n", min_sys_div); dev_dbg(dev, "min_sys_div: %d\n", min_sys_div);
min_sys_div = max(min_sys_div, min_sys_div = max(min_sys_div,
DIV_ROUND_UP(min_vt_div, DIV_ROUND_UP(min_vt_div,
limits->max_vt_pix_clk_div)); limits->vt.max_pix_clk_div));
dev_dbg(dev, "min_sys_div: max_vt_pix_clk_div: %d\n", min_sys_div); dev_dbg(dev, "min_sys_div: max_vt_pix_clk_div: %d\n", min_sys_div);
min_sys_div = max(min_sys_div, min_sys_div = max(min_sys_div,
pll->pll_op_clk_freq_hz pll->pll_op_clk_freq_hz
/ limits->max_vt_sys_clk_freq_hz); / limits->vt.max_sys_clk_freq_hz);
dev_dbg(dev, "min_sys_div: max_pll_op_clk_freq_hz: %d\n", min_sys_div); dev_dbg(dev, "min_sys_div: max_pll_op_clk_freq_hz: %d\n", min_sys_div);
min_sys_div = clk_div_even_up(min_sys_div); min_sys_div = clk_div_even_up(min_sys_div);
dev_dbg(dev, "min_sys_div: one or even: %d\n", min_sys_div); dev_dbg(dev, "min_sys_div: one or even: %d\n", min_sys_div);
max_sys_div = limits->max_vt_sys_clk_div; max_sys_div = limits->vt.max_sys_clk_div;
dev_dbg(dev, "max_sys_div: %d\n", max_sys_div); dev_dbg(dev, "max_sys_div: %d\n", max_sys_div);
max_sys_div = min(max_sys_div, max_sys_div = min(max_sys_div,
DIV_ROUND_UP(max_vt_div, DIV_ROUND_UP(max_vt_div,
limits->min_vt_pix_clk_div)); limits->vt.min_pix_clk_div));
dev_dbg(dev, "max_sys_div: min_vt_pix_clk_div: %d\n", max_sys_div); dev_dbg(dev, "max_sys_div: min_vt_pix_clk_div: %d\n", max_sys_div);
max_sys_div = min(max_sys_div, max_sys_div = min(max_sys_div,
DIV_ROUND_UP(pll->pll_op_clk_freq_hz, DIV_ROUND_UP(pll->pll_op_clk_freq_hz,
limits->min_vt_pix_clk_freq_hz)); limits->vt.min_pix_clk_freq_hz));
dev_dbg(dev, "max_sys_div: min_vt_pix_clk_freq_hz: %d\n", max_sys_div); dev_dbg(dev, "max_sys_div: min_vt_pix_clk_freq_hz: %d\n", max_sys_div);
/* /*
@ -322,15 +274,15 @@ int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
for (sys_div = min_sys_div; for (sys_div = min_sys_div;
sys_div <= max_sys_div; sys_div <= max_sys_div;
sys_div += 2 - (sys_div & 1)) { sys_div += 2 - (sys_div & 1)) {
int pix_div = DIV_ROUND_UP(vt_div, sys_div); uint16_t pix_div = DIV_ROUND_UP(vt_div, sys_div);
if (pix_div < limits->min_vt_pix_clk_div if (pix_div < limits->vt.min_pix_clk_div
|| pix_div > limits->max_vt_pix_clk_div) { || pix_div > limits->vt.max_pix_clk_div) {
dev_dbg(dev, dev_dbg(dev,
"pix_div %d too small or too big (%d--%d)\n", "pix_div %d too small or too big (%d--%d)\n",
pix_div, pix_div,
limits->min_vt_pix_clk_div, limits->vt.min_pix_clk_div,
limits->max_vt_pix_clk_div); limits->vt.max_pix_clk_div);
continue; continue;
} }
@ -354,15 +306,9 @@ int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
pll->pixel_rate_csi = pll->pixel_rate_csi =
pll->op_pix_clk_freq_hz * lane_op_clock_ratio; pll->op_pix_clk_freq_hz * lane_op_clock_ratio;
print_pll(dev, pll); rval = bounds_check(dev, pll->pll_ip_clk_freq_hz,
limits->min_pll_ip_freq_hz,
rval = bounds_check(dev, pll->pre_pll_clk_div, limits->max_pll_ip_freq_hz,
limits->min_pre_pll_clk_div,
limits->max_pre_pll_clk_div, "pre_pll_clk_div");
if (!rval)
rval = bounds_check(
dev, pll->pll_ip_clk_freq_hz,
limits->min_pll_ip_freq_hz, limits->max_pll_ip_freq_hz,
"pll_ip_clk_freq_hz"); "pll_ip_clk_freq_hz");
if (!rval) if (!rval)
rval = bounds_check( rval = bounds_check(
@ -377,42 +323,121 @@ int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
if (!rval) if (!rval)
rval = bounds_check( rval = bounds_check(
dev, pll->op_sys_clk_div, dev, pll->op_sys_clk_div,
limits->min_op_sys_clk_div, limits->max_op_sys_clk_div, limits->op.min_sys_clk_div, limits->op.max_sys_clk_div,
"op_sys_clk_div"); "op_sys_clk_div");
if (!rval) if (!rval)
rval = bounds_check( rval = bounds_check(
dev, pll->op_pix_clk_div, dev, pll->op_pix_clk_div,
limits->min_op_pix_clk_div, limits->max_op_pix_clk_div, limits->op.min_pix_clk_div, limits->op.max_pix_clk_div,
"op_pix_clk_div"); "op_pix_clk_div");
if (!rval) if (!rval)
rval = bounds_check( rval = bounds_check(
dev, pll->op_sys_clk_freq_hz, dev, pll->op_sys_clk_freq_hz,
limits->min_op_sys_clk_freq_hz, limits->op.min_sys_clk_freq_hz,
limits->max_op_sys_clk_freq_hz, limits->op.max_sys_clk_freq_hz,
"op_sys_clk_freq_hz"); "op_sys_clk_freq_hz");
if (!rval) if (!rval)
rval = bounds_check( rval = bounds_check(
dev, pll->op_pix_clk_freq_hz, dev, pll->op_pix_clk_freq_hz,
limits->min_op_pix_clk_freq_hz, limits->op.min_pix_clk_freq_hz,
limits->max_op_pix_clk_freq_hz, limits->op.max_pix_clk_freq_hz,
"op_pix_clk_freq_hz"); "op_pix_clk_freq_hz");
if (!rval) if (!rval)
rval = bounds_check( rval = bounds_check(
dev, pll->vt_sys_clk_freq_hz, dev, pll->vt_sys_clk_freq_hz,
limits->min_vt_sys_clk_freq_hz, limits->vt.min_sys_clk_freq_hz,
limits->max_vt_sys_clk_freq_hz, limits->vt.max_sys_clk_freq_hz,
"vt_sys_clk_freq_hz"); "vt_sys_clk_freq_hz");
if (!rval) if (!rval)
rval = bounds_check( rval = bounds_check(
dev, pll->vt_pix_clk_freq_hz, dev, pll->vt_pix_clk_freq_hz,
limits->min_vt_pix_clk_freq_hz, limits->vt.min_pix_clk_freq_hz,
limits->max_vt_pix_clk_freq_hz, limits->vt.max_pix_clk_freq_hz,
"vt_pix_clk_freq_hz"); "vt_pix_clk_freq_hz");
return rval; return rval;
} }
int smiapp_pll_calculate(struct device *dev,
const struct smiapp_pll_limits *limits,
struct smiapp_pll *pll)
{
uint16_t min_pre_pll_clk_div;
uint16_t max_pre_pll_clk_div;
uint32_t lane_op_clock_ratio;
uint32_t mul, div;
unsigned int i;
int rval = -EINVAL;
if (pll->flags & SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE)
lane_op_clock_ratio = pll->csi2.lanes;
else
lane_op_clock_ratio = 1;
dev_dbg(dev, "lane_op_clock_ratio: %d\n", lane_op_clock_ratio);
dev_dbg(dev, "binning: %dx%d\n", pll->binning_horizontal,
pll->binning_vertical);
switch (pll->bus_type) {
case SMIAPP_PLL_BUS_TYPE_CSI2:
/* CSI transfers 2 bits per clock per lane; thus times 2 */
pll->pll_op_clk_freq_hz = pll->link_freq * 2
* (pll->csi2.lanes / lane_op_clock_ratio);
break;
case SMIAPP_PLL_BUS_TYPE_PARALLEL:
pll->pll_op_clk_freq_hz = pll->link_freq * pll->bits_per_pixel
/ DIV_ROUND_UP(pll->bits_per_pixel,
pll->parallel.bus_width);
break;
default:
return -EINVAL;
}
/* Figure out limits for pre-pll divider based on extclk */
dev_dbg(dev, "min / max pre_pll_clk_div: %d / %d\n",
limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
max_pre_pll_clk_div =
min_t(uint16_t, limits->max_pre_pll_clk_div,
clk_div_even(pll->ext_clk_freq_hz /
limits->min_pll_ip_freq_hz));
min_pre_pll_clk_div =
max_t(uint16_t, limits->min_pre_pll_clk_div,
clk_div_even_up(
DIV_ROUND_UP(pll->ext_clk_freq_hz,
limits->max_pll_ip_freq_hz)));
dev_dbg(dev, "pre-pll check: min / max pre_pll_clk_div: %d / %d\n",
min_pre_pll_clk_div, max_pre_pll_clk_div);
i = gcd(pll->pll_op_clk_freq_hz, pll->ext_clk_freq_hz);
mul = div_u64(pll->pll_op_clk_freq_hz, i);
div = pll->ext_clk_freq_hz / i;
dev_dbg(dev, "mul %d / div %d\n", mul, div);
min_pre_pll_clk_div =
max_t(uint16_t, min_pre_pll_clk_div,
clk_div_even_up(
DIV_ROUND_UP(mul * pll->ext_clk_freq_hz,
limits->max_pll_op_freq_hz)));
dev_dbg(dev, "pll_op check: min / max pre_pll_clk_div: %d / %d\n",
min_pre_pll_clk_div, max_pre_pll_clk_div);
for (pll->pre_pll_clk_div = min_pre_pll_clk_div;
pll->pre_pll_clk_div <= max_pre_pll_clk_div;
pll->pre_pll_clk_div += 2 - (pll->pre_pll_clk_div & 1)) {
rval = __smiapp_pll_calculate(dev, limits, pll, mul, div,
lane_op_clock_ratio);
if (rval)
continue;
print_pll(dev, pll);
return 0;
}
dev_info(dev, "unable to compute pre_pll divisor\n");
return rval;
}
EXPORT_SYMBOL_GPL(smiapp_pll_calculate); EXPORT_SYMBOL_GPL(smiapp_pll_calculate);
MODULE_AUTHOR("Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>"); MODULE_AUTHOR("Sakari Ailus <sakari.ailus@iki.fi>");
MODULE_DESCRIPTION("Generic SMIA/SMIA++ PLL calculator"); MODULE_DESCRIPTION("Generic SMIA/SMIA++ PLL calculator");
MODULE_LICENSE("GPL"); MODULE_LICENSE("GPL");

59
drivers/media/i2c/smiapp-pll.h
View file

@ -4,7 +4,7 @@
* Generic driver for SMIA/SMIA++ compliant camera modules * Generic driver for SMIA/SMIA++ compliant camera modules
* *
* Copyright (C) 2012 Nokia Corporation * Copyright (C) 2012 Nokia Corporation
* Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> * Contact: Sakari Ailus <sakari.ailus@iki.fi>
* *
* This program is free software; you can redistribute it and/or * This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License * modify it under the terms of the GNU General Public License
@ -27,16 +27,34 @@
#include <linux/device.h> #include <linux/device.h>
/* CSI-2 or CCP-2 */
#define SMIAPP_PLL_BUS_TYPE_CSI2 0x00
#define SMIAPP_PLL_BUS_TYPE_PARALLEL 0x01
/* op pix clock is for all lanes in total normally */
#define SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE (1 << 0)
#define SMIAPP_PLL_FLAG_NO_OP_CLOCKS (1 << 1)
struct smiapp_pll { struct smiapp_pll {
/* input values */
uint8_t bus_type;
union {
struct {
uint8_t lanes; uint8_t lanes;
} csi2;
struct {
uint8_t bus_width;
} parallel;
};
uint8_t flags;
uint8_t binning_horizontal; uint8_t binning_horizontal;
uint8_t binning_vertical; uint8_t binning_vertical;
uint8_t scale_m; uint8_t scale_m;
uint8_t scale_n; uint8_t scale_n;
uint8_t bits_per_pixel; uint8_t bits_per_pixel;
uint16_t flags;
uint32_t link_freq; uint32_t link_freq;
/* output values */
uint16_t pre_pll_clk_div; uint16_t pre_pll_clk_div;
uint16_t pll_multiplier; uint16_t pll_multiplier;
uint16_t op_sys_clk_div; uint16_t op_sys_clk_div;
@ -55,6 +73,17 @@ struct smiapp_pll {
uint32_t pixel_rate_csi; uint32_t pixel_rate_csi;
}; };
struct smiapp_pll_branch_limits {
uint16_t min_sys_clk_div;
uint16_t max_sys_clk_div;
uint32_t min_sys_clk_freq_hz;
uint32_t max_sys_clk_freq_hz;
uint16_t min_pix_clk_div;
uint16_t max_pix_clk_div;
uint32_t min_pix_clk_freq_hz;
uint32_t max_pix_clk_freq_hz;
};
struct smiapp_pll_limits { struct smiapp_pll_limits {
/* Strict PLL limits */ /* Strict PLL limits */
uint32_t min_ext_clk_freq_hz; uint32_t min_ext_clk_freq_hz;
@ -68,36 +97,18 @@ struct smiapp_pll_limits {
uint32_t min_pll_op_freq_hz; uint32_t min_pll_op_freq_hz;
uint32_t max_pll_op_freq_hz; uint32_t max_pll_op_freq_hz;
uint16_t min_vt_sys_clk_div; struct smiapp_pll_branch_limits vt;
uint16_t max_vt_sys_clk_div; struct smiapp_pll_branch_limits op;
uint32_t min_vt_sys_clk_freq_hz;
uint32_t max_vt_sys_clk_freq_hz;
uint16_t min_vt_pix_clk_div;
uint16_t max_vt_pix_clk_div;
uint32_t min_vt_pix_clk_freq_hz;
uint32_t max_vt_pix_clk_freq_hz;
uint16_t min_op_sys_clk_div;
uint16_t max_op_sys_clk_div;
uint32_t min_op_sys_clk_freq_hz;
uint32_t max_op_sys_clk_freq_hz;
uint16_t min_op_pix_clk_div;
uint16_t max_op_pix_clk_div;
uint32_t min_op_pix_clk_freq_hz;
uint32_t max_op_pix_clk_freq_hz;
/* Other relevant limits */ /* Other relevant limits */
uint32_t min_line_length_pck_bin; uint32_t min_line_length_pck_bin;
uint32_t min_line_length_pck; uint32_t min_line_length_pck;
}; };
/* op pix clock is for all lanes in total normally */
#define SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE (1 << 0)
#define SMIAPP_PLL_FLAG_NO_OP_CLOCKS (1 << 1)
struct device; struct device;
int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits, int smiapp_pll_calculate(struct device *dev,
const struct smiapp_pll_limits *limits,
struct smiapp_pll *pll); struct smiapp_pll *pll);
#endif /* SMIAPP_PLL_H */ #endif /* SMIAPP_PLL_H */

72
drivers/media/i2c/smiapp/smiapp-core.c
View file

@ -4,7 +4,7 @@
* Generic driver for SMIA/SMIA++ compliant camera modules * Generic driver for SMIA/SMIA++ compliant camera modules
* *
* Copyright (C) 2010--2012 Nokia Corporation * Copyright (C) 2010--2012 Nokia Corporation
* Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> * Contact: Sakari Ailus <sakari.ailus@iki.fi>
* *
* Based on smiapp driver by Vimarsh Zutshi * Based on smiapp driver by Vimarsh Zutshi
* Based on jt8ev1.c by Vimarsh Zutshi * Based on jt8ev1.c by Vimarsh Zutshi
@ -252,23 +252,23 @@ static int smiapp_pll_update(struct smiapp_sensor *sensor)
.min_pll_op_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_PLL_OP_FREQ_HZ], .min_pll_op_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_PLL_OP_FREQ_HZ],
.max_pll_op_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_PLL_OP_FREQ_HZ], .max_pll_op_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_PLL_OP_FREQ_HZ],
.min_op_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV], .op.min_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV],
.max_op_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV], .op.max_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV],
.min_op_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV], .op.min_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV],
.max_op_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV], .op.max_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV],
.min_op_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_FREQ_HZ], .op.min_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_FREQ_HZ],
.max_op_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_FREQ_HZ], .op.max_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_FREQ_HZ],
.min_op_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_FREQ_HZ], .op.min_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_FREQ_HZ],
.max_op_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_FREQ_HZ], .op.max_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_FREQ_HZ],
.min_vt_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_VT_SYS_CLK_DIV], .vt.min_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_VT_SYS_CLK_DIV],
.max_vt_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_VT_SYS_CLK_DIV], .vt.max_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_VT_SYS_CLK_DIV],
.min_vt_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_VT_PIX_CLK_DIV], .vt.min_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_VT_PIX_CLK_DIV],
.max_vt_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_VT_PIX_CLK_DIV], .vt.max_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_VT_PIX_CLK_DIV],
.min_vt_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_VT_SYS_CLK_FREQ_HZ], .vt.min_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_VT_SYS_CLK_FREQ_HZ],
.max_vt_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_VT_SYS_CLK_FREQ_HZ], .vt.max_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_VT_SYS_CLK_FREQ_HZ],
.min_vt_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_VT_PIX_CLK_FREQ_HZ], .vt.min_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_VT_PIX_CLK_FREQ_HZ],
.max_vt_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_VT_PIX_CLK_FREQ_HZ], .vt.max_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_VT_PIX_CLK_FREQ_HZ],
.min_line_length_pck_bin = sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN], .min_line_length_pck_bin = sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN],
.min_line_length_pck = sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK], .min_line_length_pck = sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK],
@ -276,11 +276,6 @@ static int smiapp_pll_update(struct smiapp_sensor *sensor)
struct smiapp_pll *pll = &sensor->pll; struct smiapp_pll *pll = &sensor->pll;
int rval; int rval;
memset(&sensor->pll, 0, sizeof(sensor->pll));
pll->lanes = sensor->platform_data->lanes;
pll->ext_clk_freq_hz = sensor->platform_data->ext_clk;
if (sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0) { if (sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0) {
/* /*
* Fill in operational clock divisors limits from the * Fill in operational clock divisors limits from the
@ -288,28 +283,14 @@ static int smiapp_pll_update(struct smiapp_sensor *sensor)
* requirements regarding them are essentially the * requirements regarding them are essentially the
* same as on VT ones. * same as on VT ones.
*/ */
lim.min_op_sys_clk_div = lim.min_vt_sys_clk_div; lim.op = lim.vt;
lim.max_op_sys_clk_div = lim.max_vt_sys_clk_div;
lim.min_op_pix_clk_div = lim.min_vt_pix_clk_div;
lim.max_op_pix_clk_div = lim.max_vt_pix_clk_div;
lim.min_op_sys_clk_freq_hz = lim.min_vt_sys_clk_freq_hz;
lim.max_op_sys_clk_freq_hz = lim.max_vt_sys_clk_freq_hz;
lim.min_op_pix_clk_freq_hz = lim.min_vt_pix_clk_freq_hz;
lim.max_op_pix_clk_freq_hz = lim.max_vt_pix_clk_freq_hz;
/* Profile 0 sensors have no separate OP clock branch. */
pll->flags |= SMIAPP_PLL_FLAG_NO_OP_CLOCKS;
} }
if (smiapp_needs_quirk(sensor,
SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE))
pll->flags |= SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE;
pll->binning_horizontal = sensor->binning_horizontal; pll->binning_horizontal = sensor->binning_horizontal;
pll->binning_vertical = sensor->binning_vertical; pll->binning_vertical = sensor->binning_vertical;
pll->link_freq = pll->link_freq =
sensor->link_freq->qmenu_int[sensor->link_freq->val]; sensor->link_freq->qmenu_int[sensor->link_freq->val];
pll->scale_m = sensor->scale_m; pll->scale_m = sensor->scale_m;
pll->scale_n = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN];
pll->bits_per_pixel = sensor->csi_format->compressed; pll->bits_per_pixel = sensor->csi_format->compressed;
rval = smiapp_pll_calculate(&client->dev, &lim, pll); rval = smiapp_pll_calculate(&client->dev, &lim, pll);
@ -1010,7 +991,7 @@ static int smiapp_setup_flash_strobe(struct smiapp_sensor *sensor)
* do not change, or if you do at least know what you're * do not change, or if you do at least know what you're
* doing. :-) * doing. :-)
* *
* Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> 2010-10-25 * Sakari Ailus <sakari.ailus@iki.fi> 2010-10-25
* *
* flash_strobe_length [us] / 10^6 = (tFlash_strobe_width_ctrl * flash_strobe_length [us] / 10^6 = (tFlash_strobe_width_ctrl
* / EXTCLK freq [Hz]) * flash_strobe_adjustment * / EXTCLK freq [Hz]) * flash_strobe_adjustment
@ -2369,6 +2350,7 @@ static int smiapp_registered(struct v4l2_subdev *subdev)
{ {
struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
struct i2c_client *client = v4l2_get_subdevdata(subdev); struct i2c_client *client = v4l2_get_subdevdata(subdev);
struct smiapp_pll *pll = &sensor->pll;
struct smiapp_subdev *last = NULL; struct smiapp_subdev *last = NULL;
u32 tmp; u32 tmp;
unsigned int i; unsigned int i;
@ -2635,6 +2617,18 @@ static int smiapp_registered(struct v4l2_subdev *subdev)
if (rval < 0) if (rval < 0)
goto out_nvm_release; goto out_nvm_release;
/* prepare PLL configuration input values */
pll->bus_type = SMIAPP_PLL_BUS_TYPE_CSI2;
pll->csi2.lanes = sensor->platform_data->lanes;
pll->ext_clk_freq_hz = sensor->platform_data->ext_clk;
/* Profile 0 sensors have no separate OP clock branch. */
if (sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0)
pll->flags |= SMIAPP_PLL_FLAG_NO_OP_CLOCKS;
if (smiapp_needs_quirk(sensor,
SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE))
pll->flags |= SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE;
pll->scale_n = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN];
rval = smiapp_update_mode(sensor); rval = smiapp_update_mode(sensor);
if (rval) { if (rval) {
dev_err(&client->dev, "update mode failed\n"); dev_err(&client->dev, "update mode failed\n");
@ -2893,6 +2887,6 @@ static struct i2c_driver smiapp_i2c_driver = {
module_i2c_driver(smiapp_i2c_driver); module_i2c_driver(smiapp_i2c_driver);
MODULE_AUTHOR("Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>"); MODULE_AUTHOR("Sakari Ailus <sakari.ailus@iki.fi>");
MODULE_DESCRIPTION("Generic SMIA/SMIA++ camera module driver"); MODULE_DESCRIPTION("Generic SMIA/SMIA++ camera module driver");
MODULE_LICENSE("GPL"); MODULE_LICENSE("GPL");

2
drivers/media/i2c/smiapp/smiapp-limits.c
View file

@ -4,7 +4,7 @@
* Generic driver for SMIA/SMIA++ compliant camera modules * Generic driver for SMIA/SMIA++ compliant camera modules
* *
* Copyright (C) 2011--2012 Nokia Corporation * Copyright (C) 2011--2012 Nokia Corporation
* Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> * Contact: Sakari Ailus <sakari.ailus@iki.fi>
* *
* This program is free software; you can redistribute it and/or * This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License * modify it under the terms of the GNU General Public License

2
drivers/media/i2c/smiapp/smiapp-limits.h
View file

@ -4,7 +4,7 @@
* Generic driver for SMIA/SMIA++ compliant camera modules * Generic driver for SMIA/SMIA++ compliant camera modules
* *
* Copyright (C) 2011--2012 Nokia Corporation * Copyright (C) 2011--2012 Nokia Corporation
* Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> * Contact: Sakari Ailus <sakari.ailus@iki.fi>
* *
* This program is free software; you can redistribute it and/or * This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License * modify it under the terms of the GNU General Public License

2
drivers/media/i2c/smiapp/smiapp-quirk.c
View file

@ -4,7 +4,7 @@
* Generic driver for SMIA/SMIA++ compliant camera modules * Generic driver for SMIA/SMIA++ compliant camera modules
* *
* Copyright (C) 2011--2012 Nokia Corporation * Copyright (C) 2011--2012 Nokia Corporation
* Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> * Contact: Sakari Ailus <sakari.ailus@iki.fi>
* *
* This program is free software; you can redistribute it and/or * This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License * modify it under the terms of the GNU General Public License

2
drivers/media/i2c/smiapp/smiapp-quirk.h
View file

@ -4,7 +4,7 @@
* Generic driver for SMIA/SMIA++ compliant camera modules * Generic driver for SMIA/SMIA++ compliant camera modules
* *
* Copyright (C) 2011--2012 Nokia Corporation * Copyright (C) 2011--2012 Nokia Corporation
* Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> * Contact: Sakari Ailus <sakari.ailus@iki.fi>
* *
* This program is free software; you can redistribute it and/or * This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License * modify it under the terms of the GNU General Public License

2
drivers/media/i2c/smiapp/smiapp-reg-defs.h
View file

@ -4,7 +4,7 @@
* Generic driver for SMIA/SMIA++ compliant camera modules * Generic driver for SMIA/SMIA++ compliant camera modules
* *
* Copyright (C) 2011--2012 Nokia Corporation * Copyright (C) 2011--2012 Nokia Corporation
* Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> * Contact: Sakari Ailus <sakari.ailus@iki.fi>
* *
* This program is free software; you can redistribute it and/or * This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License * modify it under the terms of the GNU General Public License

2
drivers/media/i2c/smiapp/smiapp-reg.h
View file

@ -4,7 +4,7 @@
* Generic driver for SMIA/SMIA++ compliant camera modules * Generic driver for SMIA/SMIA++ compliant camera modules
* *
* Copyright (C) 2011--2012 Nokia Corporation * Copyright (C) 2011--2012 Nokia Corporation
* Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> * Contact: Sakari Ailus <sakari.ailus@iki.fi>
* *
* This program is free software; you can redistribute it and/or * This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License * modify it under the terms of the GNU General Public License

2
drivers/media/i2c/smiapp/smiapp-regs.c
View file

@ -4,7 +4,7 @@
* Generic driver for SMIA/SMIA++ compliant camera modules * Generic driver for SMIA/SMIA++ compliant camera modules
* *
* Copyright (C) 2011--2012 Nokia Corporation * Copyright (C) 2011--2012 Nokia Corporation
* Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> * Contact: Sakari Ailus <sakari.ailus@iki.fi>
* *
* This program is free software; you can redistribute it and/or * This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License * modify it under the terms of the GNU General Public License

2
drivers/media/i2c/smiapp/smiapp-regs.h
View file

@ -4,7 +4,7 @@
* Generic driver for SMIA/SMIA++ compliant camera modules * Generic driver for SMIA/SMIA++ compliant camera modules
* *
* Copyright (C) 2011--2012 Nokia Corporation * Copyright (C) 2011--2012 Nokia Corporation
* Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> * Contact: Sakari Ailus <sakari.ailus@iki.fi>
* *
* This program is free software; you can redistribute it and/or * This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License * modify it under the terms of the GNU General Public License

2
drivers/media/i2c/smiapp/smiapp.h
View file

@ -4,7 +4,7 @@
* Generic driver for SMIA/SMIA++ compliant camera modules * Generic driver for SMIA/SMIA++ compliant camera modules
* *
* Copyright (C) 2010--2012 Nokia Corporation * Copyright (C) 2010--2012 Nokia Corporation
* Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> * Contact: Sakari Ailus <sakari.ailus@iki.fi>
* *
* This program is free software; you can redistribute it and/or * This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License * modify it under the terms of the GNU General Public License

86
drivers/media/i2c/soc_camera/mt9v022.c
View file

@ -15,6 +15,7 @@
#include <linux/log2.h> #include <linux/log2.h>
#include <linux/module.h> #include <linux/module.h>
#include <media/mt9v022.h>
#include <media/soc_camera.h> #include <media/soc_camera.h>
#include <media/soc_mediabus.h> #include <media/soc_mediabus.h>
#include <media/v4l2-subdev.h> #include <media/v4l2-subdev.h>
@ -50,6 +51,7 @@ MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\"");
#define MT9V022_PIXEL_OPERATION_MODE 0x0f #define MT9V022_PIXEL_OPERATION_MODE 0x0f
#define MT9V022_LED_OUT_CONTROL 0x1b #define MT9V022_LED_OUT_CONTROL 0x1b
#define MT9V022_ADC_MODE_CONTROL 0x1c #define MT9V022_ADC_MODE_CONTROL 0x1c
#define MT9V022_REG32 0x20
#define MT9V022_ANALOG_GAIN 0x35 #define MT9V022_ANALOG_GAIN 0x35
#define MT9V022_BLACK_LEVEL_CALIB_CTRL 0x47 #define MT9V022_BLACK_LEVEL_CALIB_CTRL 0x47
#define MT9V022_PIXCLK_FV_LV 0x74 #define MT9V022_PIXCLK_FV_LV 0x74
@ -71,6 +73,14 @@ MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\"");
#define MT9V022_COLUMN_SKIP 1 #define MT9V022_COLUMN_SKIP 1
#define MT9V022_ROW_SKIP 4 #define MT9V022_ROW_SKIP 4
#define MT9V022_HORIZONTAL_BLANKING_MIN 43
#define MT9V022_HORIZONTAL_BLANKING_MAX 1023
#define MT9V022_HORIZONTAL_BLANKING_DEF 94
#define MT9V022_VERTICAL_BLANKING_MIN 2
#define MT9V022_VERTICAL_BLANKING_MAX 3000
#define MT9V022_VERTICAL_BLANKING_DEF 45
#define is_mt9v022_rev3(id) (id == 0x1313)
#define is_mt9v024(id) (id == 0x1324) #define is_mt9v024(id) (id == 0x1324)
/* MT9V022 has only one fixed colorspace per pixelcode */ /* MT9V022 has only one fixed colorspace per pixelcode */
@ -136,6 +146,8 @@ struct mt9v022 {
struct v4l2_ctrl *autogain; struct v4l2_ctrl *autogain;
struct v4l2_ctrl *gain; struct v4l2_ctrl *gain;
}; };
struct v4l2_ctrl *hblank;
struct v4l2_ctrl *vblank;
struct v4l2_rect rect; /* Sensor window */ struct v4l2_rect rect; /* Sensor window */
const struct mt9v022_datafmt *fmt; const struct mt9v022_datafmt *fmt;
const struct mt9v022_datafmt *fmts; const struct mt9v022_datafmt *fmts;
@ -143,6 +155,7 @@ struct mt9v022 {
int num_fmts; int num_fmts;
int model; /* V4L2_IDENT_MT9V022* codes from v4l2-chip-ident.h */ int model; /* V4L2_IDENT_MT9V022* codes from v4l2-chip-ident.h */
u16 chip_control; u16 chip_control;
u16 chip_version;
unsigned short y_skip_top; /* Lines to skip at the top */ unsigned short y_skip_top; /* Lines to skip at the top */
}; };
@ -225,12 +238,32 @@ static int mt9v022_s_stream(struct v4l2_subdev *sd, int enable)
struct i2c_client *client = v4l2_get_subdevdata(sd); struct i2c_client *client = v4l2_get_subdevdata(sd);
struct mt9v022 *mt9v022 = to_mt9v022(client); struct mt9v022 *mt9v022 = to_mt9v022(client);
if (enable) if (enable) {
/* Switch to master "normal" mode */ /* Switch to master "normal" mode */
mt9v022->chip_control &= ~0x10; mt9v022->chip_control &= ~0x10;
else if (is_mt9v022_rev3(mt9v022->chip_version) ||
is_mt9v024(mt9v022->chip_version)) {
/*
* Unset snapshot mode specific settings: clear bit 9
* and bit 2 in reg. 0x20 when in normal mode.
*/
if (reg_clear(client, MT9V022_REG32, 0x204))
return -EIO;
}
} else {
/* Switch to snapshot mode */ /* Switch to snapshot mode */
mt9v022->chip_control |= 0x10; mt9v022->chip_control |= 0x10;
if (is_mt9v022_rev3(mt9v022->chip_version) ||
is_mt9v024(mt9v022->chip_version)) {
/*
* Required settings for snapshot mode: set bit 9
* (RST enable) and bit 2 (CR enable) in reg. 0x20
* See TechNote TN0960 or TN-09-225.
*/
if (reg_set(client, MT9V022_REG32, 0x204))
return -EIO;
}
}
if (reg_write(client, MT9V022_CHIP_CONTROL, mt9v022->chip_control) < 0) if (reg_write(client, MT9V022_CHIP_CONTROL, mt9v022->chip_control) < 0)
return -EIO; return -EIO;
@ -282,11 +315,10 @@ static int mt9v022_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a)
* Default 94, Phytec driver says: * Default 94, Phytec driver says:
* "width + horizontal blank >= 660" * "width + horizontal blank >= 660"
*/ */
ret = reg_write(client, MT9V022_HORIZONTAL_BLANKING, ret = v4l2_ctrl_s_ctrl(mt9v022->hblank,
rect.width > 660 - 43 ? 43 : rect.width > 660 - 43 ? 43 : 660 - rect.width);
660 - rect.width);
if (!ret) if (!ret)
ret = reg_write(client, MT9V022_VERTICAL_BLANKING, 45); ret = v4l2_ctrl_s_ctrl(mt9v022->vblank, 45);
if (!ret) if (!ret)
ret = reg_write(client, MT9V022_WINDOW_WIDTH, rect.width); ret = reg_write(client, MT9V022_WINDOW_WIDTH, rect.width);
if (!ret) if (!ret)
@ -509,6 +541,18 @@ static int mt9v022_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
range = exp->maximum - exp->minimum; range = exp->maximum - exp->minimum;
exp->val = ((data - 1) * range + 239) / 479 + exp->minimum; exp->val = ((data - 1) * range + 239) / 479 + exp->minimum;
return 0; return 0;
case V4L2_CID_HBLANK:
data = reg_read(client, MT9V022_HORIZONTAL_BLANKING);
if (data < 0)
return -EIO;
ctrl->val = data;
return 0;
case V4L2_CID_VBLANK:
data = reg_read(client, MT9V022_VERTICAL_BLANKING);
if (data < 0)
return -EIO;
ctrl->val = data;
return 0;
} }
return -EINVAL; return -EINVAL;
} }
@ -590,6 +634,16 @@ static int mt9v022_s_ctrl(struct v4l2_ctrl *ctrl)
return -EIO; return -EIO;
} }
return 0; return 0;
case V4L2_CID_HBLANK:
if (reg_write(client, MT9V022_HORIZONTAL_BLANKING,
ctrl->val) < 0)
return -EIO;
return 0;
case V4L2_CID_VBLANK:
if (reg_write(client, MT9V022_VERTICAL_BLANKING,
ctrl->val) < 0)
return -EIO;
return 0;
} }
return -EINVAL; return -EINVAL;
} }
@ -621,6 +675,8 @@ static int mt9v022_video_probe(struct i2c_client *client)
goto ei2c; goto ei2c;
} }
mt9v022->chip_version = data;
mt9v022->reg = is_mt9v024(data) ? &mt9v024_register : mt9v022->reg = is_mt9v024(data) ? &mt9v024_register :
&mt9v022_register; &mt9v022_register;
@ -819,6 +875,7 @@ static int mt9v022_probe(struct i2c_client *client,
struct mt9v022 *mt9v022; struct mt9v022 *mt9v022;
struct soc_camera_link *icl = soc_camera_i2c_to_link(client); struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
struct mt9v022_platform_data *pdata = icl->priv;
int ret; int ret;
if (!icl) { if (!icl) {
@ -857,10 +914,21 @@ static int mt9v022_probe(struct i2c_client *client,
mt9v022->exposure = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops, mt9v022->exposure = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
V4L2_CID_EXPOSURE, 1, 255, 1, 255); V4L2_CID_EXPOSURE, 1, 255, 1, 255);
mt9v022->hblank = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
V4L2_CID_HBLANK, MT9V022_HORIZONTAL_BLANKING_MIN,
MT9V022_HORIZONTAL_BLANKING_MAX, 1,
MT9V022_HORIZONTAL_BLANKING_DEF);
mt9v022->vblank = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
V4L2_CID_VBLANK, MT9V022_VERTICAL_BLANKING_MIN,
MT9V022_VERTICAL_BLANKING_MAX, 1,
MT9V022_VERTICAL_BLANKING_DEF);
mt9v022->subdev.ctrl_handler = &mt9v022->hdl; mt9v022->subdev.ctrl_handler = &mt9v022->hdl;
if (mt9v022->hdl.error) { if (mt9v022->hdl.error) {
int err = mt9v022->hdl.error; int err = mt9v022->hdl.error;
dev_err(&client->dev, "control initialisation err %d\n", err);
kfree(mt9v022); kfree(mt9v022);
return err; return err;
} }
@ -871,10 +939,10 @@ static int mt9v022_probe(struct i2c_client *client,
mt9v022->chip_control = MT9V022_CHIP_CONTROL_DEFAULT; mt9v022->chip_control = MT9V022_CHIP_CONTROL_DEFAULT;
/* /*
* MT9V022 _really_ corrupts the first read out line. * On some platforms the first read out line is corrupted.
* TODO: verify on i.MX31 * Workaround it by skipping if indicated by platform data.
*/ */
mt9v022->y_skip_top = 1; mt9v022->y_skip_top = pdata ? pdata->y_skip_top : 0;
mt9v022->rect.left = MT9V022_COLUMN_SKIP; mt9v022->rect.left = MT9V022_COLUMN_SKIP;
mt9v022->rect.top = MT9V022_ROW_SKIP; mt9v022->rect.top = MT9V022_ROW_SKIP;
mt9v022->rect.width = MT9V022_MAX_WIDTH; mt9v022->rect.width = MT9V022_MAX_WIDTH;

55
drivers/media/i2c/soc_camera/ov2640.c
View file

@ -586,9 +586,20 @@ static const struct regval_list ov2640_format_change_preamble_regs[] = {
ENDMARKER, ENDMARKER,
}; };
static const struct regval_list ov2640_yuv422_regs[] = { static const struct regval_list ov2640_yuyv_regs[] = {
{ IMAGE_MODE, IMAGE_MODE_YUV422 },
{ 0xd7, 0x03 },
{ 0x33, 0xa0 },
{ 0xe5, 0x1f },
{ 0xe1, 0x67 },
{ RESET, 0x00 },
{ R_BYPASS, R_BYPASS_USE_DSP },
ENDMARKER,
};
static const struct regval_list ov2640_uyvy_regs[] = {
{ IMAGE_MODE, IMAGE_MODE_LBYTE_FIRST | IMAGE_MODE_YUV422 }, { IMAGE_MODE, IMAGE_MODE_LBYTE_FIRST | IMAGE_MODE_YUV422 },
{ 0xD7, 0x01 }, { 0xd7, 0x01 },
{ 0x33, 0xa0 }, { 0x33, 0xa0 },
{ 0xe1, 0x67 }, { 0xe1, 0x67 },
{ RESET, 0x00 }, { RESET, 0x00 },
@ -596,7 +607,15 @@ static const struct regval_list ov2640_yuv422_regs[] = {
ENDMARKER, ENDMARKER,
}; };
static const struct regval_list ov2640_rgb565_regs[] = { static const struct regval_list ov2640_rgb565_be_regs[] = {
{ IMAGE_MODE, IMAGE_MODE_RGB565 },
{ 0xd7, 0x03 },
{ RESET, 0x00 },
{ R_BYPASS, R_BYPASS_USE_DSP },
ENDMARKER,
};
static const struct regval_list ov2640_rgb565_le_regs[] = {
{ IMAGE_MODE, IMAGE_MODE_LBYTE_FIRST | IMAGE_MODE_RGB565 }, { IMAGE_MODE, IMAGE_MODE_LBYTE_FIRST | IMAGE_MODE_RGB565 },
{ 0xd7, 0x03 }, { 0xd7, 0x03 },
{ RESET, 0x00 }, { RESET, 0x00 },
@ -605,7 +624,9 @@ static const struct regval_list ov2640_rgb565_regs[] = {
}; };
static enum v4l2_mbus_pixelcode ov2640_codes[] = { static enum v4l2_mbus_pixelcode ov2640_codes[] = {
V4L2_MBUS_FMT_YUYV8_2X8,
V4L2_MBUS_FMT_UYVY8_2X8, V4L2_MBUS_FMT_UYVY8_2X8,
V4L2_MBUS_FMT_RGB565_2X8_BE,
V4L2_MBUS_FMT_RGB565_2X8_LE, V4L2_MBUS_FMT_RGB565_2X8_LE,
}; };
@ -787,14 +808,22 @@ static int ov2640_set_params(struct i2c_client *client, u32 *width, u32 *height,
/* select format */ /* select format */
priv->cfmt_code = 0; priv->cfmt_code = 0;
switch (code) { switch (code) {
case V4L2_MBUS_FMT_RGB565_2X8_BE:
dev_dbg(&client->dev, "%s: Selected cfmt RGB565 BE", __func__);
selected_cfmt_regs = ov2640_rgb565_be_regs;
break;
case V4L2_MBUS_FMT_RGB565_2X8_LE: case V4L2_MBUS_FMT_RGB565_2X8_LE:
dev_dbg(&client->dev, "%s: Selected cfmt RGB565", __func__); dev_dbg(&client->dev, "%s: Selected cfmt RGB565 LE", __func__);
selected_cfmt_regs = ov2640_rgb565_regs; selected_cfmt_regs = ov2640_rgb565_le_regs;
break;
case V4L2_MBUS_FMT_YUYV8_2X8:
dev_dbg(&client->dev, "%s: Selected cfmt YUYV (YUV422)", __func__);
selected_cfmt_regs = ov2640_yuyv_regs;
break; break;
default: default:
case V4L2_MBUS_FMT_UYVY8_2X8: case V4L2_MBUS_FMT_UYVY8_2X8:
dev_dbg(&client->dev, "%s: Selected cfmt YUV422", __func__); dev_dbg(&client->dev, "%s: Selected cfmt UYVY", __func__);
selected_cfmt_regs = ov2640_yuv422_regs; selected_cfmt_regs = ov2640_uyvy_regs;
} }
/* reset hardware */ /* reset hardware */
@ -859,10 +888,12 @@ static int ov2640_g_fmt(struct v4l2_subdev *sd,
mf->code = priv->cfmt_code; mf->code = priv->cfmt_code;
switch (mf->code) { switch (mf->code) {
case V4L2_MBUS_FMT_RGB565_2X8_BE:
case V4L2_MBUS_FMT_RGB565_2X8_LE: case V4L2_MBUS_FMT_RGB565_2X8_LE:
mf->colorspace = V4L2_COLORSPACE_SRGB; mf->colorspace = V4L2_COLORSPACE_SRGB;
break; break;
default: default:
case V4L2_MBUS_FMT_YUYV8_2X8:
case V4L2_MBUS_FMT_UYVY8_2X8: case V4L2_MBUS_FMT_UYVY8_2X8:
mf->colorspace = V4L2_COLORSPACE_JPEG; mf->colorspace = V4L2_COLORSPACE_JPEG;
} }
@ -879,11 +910,13 @@ static int ov2640_s_fmt(struct v4l2_subdev *sd,
switch (mf->code) { switch (mf->code) {
case V4L2_MBUS_FMT_RGB565_2X8_BE:
case V4L2_MBUS_FMT_RGB565_2X8_LE: case V4L2_MBUS_FMT_RGB565_2X8_LE:
mf->colorspace = V4L2_COLORSPACE_SRGB; mf->colorspace = V4L2_COLORSPACE_SRGB;
break; break;
default: default:
mf->code = V4L2_MBUS_FMT_UYVY8_2X8; mf->code = V4L2_MBUS_FMT_UYVY8_2X8;
case V4L2_MBUS_FMT_YUYV8_2X8:
case V4L2_MBUS_FMT_UYVY8_2X8: case V4L2_MBUS_FMT_UYVY8_2X8:
mf->colorspace = V4L2_COLORSPACE_JPEG; mf->colorspace = V4L2_COLORSPACE_JPEG;
} }
@ -896,21 +929,21 @@ static int ov2640_s_fmt(struct v4l2_subdev *sd,
static int ov2640_try_fmt(struct v4l2_subdev *sd, static int ov2640_try_fmt(struct v4l2_subdev *sd,
struct v4l2_mbus_framefmt *mf) struct v4l2_mbus_framefmt *mf)
{ {
const struct ov2640_win_size *win;
/* /*
* select suitable win * select suitable win, but don't store it
*/ */
win = ov2640_select_win(&mf->width, &mf->height); ov2640_select_win(&mf->width, &mf->height);
mf->field = V4L2_FIELD_NONE; mf->field = V4L2_FIELD_NONE;
switch (mf->code) { switch (mf->code) {
case V4L2_MBUS_FMT_RGB565_2X8_BE:
case V4L2_MBUS_FMT_RGB565_2X8_LE: case V4L2_MBUS_FMT_RGB565_2X8_LE:
mf->colorspace = V4L2_COLORSPACE_SRGB; mf->colorspace = V4L2_COLORSPACE_SRGB;
break; break;
default: default:
mf->code = V4L2_MBUS_FMT_UYVY8_2X8; mf->code = V4L2_MBUS_FMT_UYVY8_2X8;
case V4L2_MBUS_FMT_YUYV8_2X8:
case V4L2_MBUS_FMT_UYVY8_2X8: case V4L2_MBUS_FMT_UYVY8_2X8:
mf->colorspace = V4L2_COLORSPACE_JPEG; mf->colorspace = V4L2_COLORSPACE_JPEG;
} }

13
drivers/media/i2c/vs6624.c
View file

@ -910,18 +910,7 @@ static struct i2c_driver vs6624_driver = {
.id_table = vs6624_id, .id_table = vs6624_id,
}; };
static __init int vs6624_init(void) module_i2c_driver(vs6624_driver);
{
return i2c_add_driver(&vs6624_driver);
}
static __exit void vs6624_exit(void)
{
i2c_del_driver(&vs6624_driver);
}
module_init(vs6624_init);
module_exit(vs6624_exit);
MODULE_DESCRIPTION("VS6624 sensor driver"); MODULE_DESCRIPTION("VS6624 sensor driver");
MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>"); MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>");

3
drivers/media/mmc/siano/Kconfig
View file

@ -4,7 +4,8 @@
config SMS_SDIO_DRV config SMS_SDIO_DRV
tristate "Siano SMS1xxx based MDTV via SDIO interface" tristate "Siano SMS1xxx based MDTV via SDIO interface"
depends on DVB_CORE && RC_CORE && HAS_DMA depends on DVB_CORE && HAS_DMA
depends on MMC depends on MMC
select MEDIA_COMMON_OPTIONS
---help--- ---help---
Choose if you would like to have Siano's support for SDIO interface Choose if you would like to have Siano's support for SDIO interface

7
drivers/media/pci/bt8xx/bttv-driver.c
View file

@ -200,7 +200,7 @@ static void flush_request_modules(struct bttv *dev)
} }
#else #else
#define request_modules(dev) #define request_modules(dev)
#define flush_request_modules(dev) #define flush_request_modules(dev) do {} while(0)
#endif /* CONFIG_MODULES */ #endif /* CONFIG_MODULES */
@ -301,11 +301,10 @@ const struct bttv_tvnorm bttv_tvnorms[] = {
/* totalwidth */ 1135, /* totalwidth */ 1135,
/* sqwidth */ 944, /* sqwidth */ 944,
/* vdelay */ 0x20, /* vdelay */ 0x20,
/* sheight */ 576,
/* videostart0 */ 23)
/* bt878 (and bt848?) can capture another /* bt878 (and bt848?) can capture another
line below active video. */ line below active video. */
.cropcap.bounds.height = (576 + 2) + 0x20 - 2, /* sheight */ (576 + 2) + 0x20 - 2,
/* videostart0 */ 23)
},{ },{
.v4l2_id = V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR, .v4l2_id = V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR,
.name = "NTSC", .name = "NTSC",

2
drivers/media/pci/cx18/cx18-alsa-main.c
View file

@ -197,7 +197,7 @@ err_exit:
return ret; return ret;
} }
int cx18_alsa_load(struct cx18 *cx) static int __init cx18_alsa_load(struct cx18 *cx)
{ {
struct v4l2_device *v4l2_dev = &cx->v4l2_dev; struct v4l2_device *v4l2_dev = &cx->v4l2_dev;
struct cx18_stream *s; struct cx18_stream *s;

1
drivers/media/pci/cx18/cx18-alsa-pcm.c
View file

@ -37,6 +37,7 @@
#include "cx18-streams.h" #include "cx18-streams.h"
#include "cx18-fileops.h" #include "cx18-fileops.h"
#include "cx18-alsa.h" #include "cx18-alsa.h"
#include "cx18-alsa-pcm.h"
static unsigned int pcm_debug; static unsigned int pcm_debug;
module_param(pcm_debug, int, 0644); module_param(pcm_debug, int, 0644);

2
drivers/media/pci/cx18/cx18-i2c.c
View file

@ -98,7 +98,7 @@ static int cx18_i2c_new_ir(struct cx18 *cx, struct i2c_adapter *adap, u32 hw,
case CX18_HW_Z8F0811_IR_RX_HAUP: case CX18_HW_Z8F0811_IR_RX_HAUP:
init_data->ir_codes = RC_MAP_HAUPPAUGE; init_data->ir_codes = RC_MAP_HAUPPAUGE;
init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR; init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
init_data->type = RC_TYPE_RC5; init_data->type = RC_BIT_RC5;
init_data->name = cx->card_name; init_data->name = cx->card_name;
info.platform_data = init_data; info.platform_data = init_data;
break; break;

2
drivers/media/pci/cx18/cx18-streams.c
View file

@ -97,7 +97,7 @@ static struct {
}; };
void cx18_dma_free(struct videobuf_queue *q, static void cx18_dma_free(struct videobuf_queue *q,
struct cx18_stream *s, struct cx18_videobuf_buffer *buf) struct cx18_stream *s, struct cx18_videobuf_buffer *buf)
{ {
videobuf_waiton(q, &buf->vb, 0, 0); videobuf_waiton(q, &buf->vb, 0, 0);

39
drivers/media/pci/cx23885/altera-ci.c
View file

@ -263,7 +263,7 @@ static int netup_fpga_op_rw(struct fpga_internal *inter, int addr,
} }
/* flag - mem/io, read - read/write */ /* flag - mem/io, read - read/write */
int altera_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot, static int altera_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot,
u8 flag, u8 read, int addr, u8 val) u8 flag, u8 read, int addr, u8 val)
{ {
@ -298,31 +298,32 @@ int altera_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot,
return mem; return mem;
} }
int altera_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221, static int altera_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221,
int slot, int addr) int slot, int addr)
{ {
return altera_ci_op_cam(en50221, slot, 0, NETUP_CI_FLG_RD, addr, 0); return altera_ci_op_cam(en50221, slot, 0, NETUP_CI_FLG_RD, addr, 0);
} }
int altera_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221, static int altera_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221,
int slot, int addr, u8 data) int slot, int addr, u8 data)
{ {
return altera_ci_op_cam(en50221, slot, 0, 0, addr, data); return altera_ci_op_cam(en50221, slot, 0, 0, addr, data);
} }
int altera_ci_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr) static int altera_ci_read_cam_ctl(struct dvb_ca_en50221 *en50221,
int slot, u8 addr)
{ {
return altera_ci_op_cam(en50221, slot, NETUP_CI_FLG_CTL, return altera_ci_op_cam(en50221, slot, NETUP_CI_FLG_CTL,
NETUP_CI_FLG_RD, addr, 0); NETUP_CI_FLG_RD, addr, 0);
} }
int altera_ci_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, static int altera_ci_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot,
u8 addr, u8 data) u8 addr, u8 data)
{ {
return altera_ci_op_cam(en50221, slot, NETUP_CI_FLG_CTL, 0, addr, data); return altera_ci_op_cam(en50221, slot, NETUP_CI_FLG_CTL, 0, addr, data);
} }
int altera_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot) static int altera_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot)
{ {
struct altera_ci_state *state = en50221->data; struct altera_ci_state *state = en50221->data;
struct fpga_internal *inter = state->internal; struct fpga_internal *inter = state->internal;
@ -365,13 +366,13 @@ int altera_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot)
return 0; return 0;
} }
int altera_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot) static int altera_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot)
{ {
/* not implemented */ /* not implemented */
return 0; return 0;
} }
int altera_ci_slot_ts_ctl(struct dvb_ca_en50221 *en50221, int slot) static int altera_ci_slot_ts_ctl(struct dvb_ca_en50221 *en50221, int slot)
{ {
struct altera_ci_state *state = en50221->data; struct altera_ci_state *state = en50221->data;
struct fpga_internal *inter = state->internal; struct fpga_internal *inter = state->internal;
@ -448,8 +449,8 @@ int altera_ci_irq(void *dev)
} }
EXPORT_SYMBOL(altera_ci_irq); EXPORT_SYMBOL(altera_ci_irq);
int altera_poll_ci_slot_status(struct dvb_ca_en50221 *en50221, int slot, static int altera_poll_ci_slot_status(struct dvb_ca_en50221 *en50221,
int open) int slot, int open)
{ {
struct altera_ci_state *state = en50221->data; struct altera_ci_state *state = en50221->data;
@ -459,7 +460,7 @@ int altera_poll_ci_slot_status(struct dvb_ca_en50221 *en50221, int slot,
return state->status; return state->status;
} }
void altera_hw_filt_release(void *main_dev, int filt_nr) static void altera_hw_filt_release(void *main_dev, int filt_nr)
{ {
struct fpga_inode *temp_int = find_inode(main_dev); struct fpga_inode *temp_int = find_inode(main_dev);
struct netup_hw_pid_filter *pid_filt = NULL; struct netup_hw_pid_filter *pid_filt = NULL;
@ -581,7 +582,7 @@ static void altera_toggle_fullts_streaming(struct netup_hw_pid_filter *pid_filt,
mutex_unlock(&inter->fpga_mutex); mutex_unlock(&inter->fpga_mutex);
} }
int altera_pid_feed_control(void *demux_dev, int filt_nr, static int altera_pid_feed_control(void *demux_dev, int filt_nr,
struct dvb_demux_feed *feed, int onoff) struct dvb_demux_feed *feed, int onoff)
{ {
struct fpga_inode *temp_int = find_dinode(demux_dev); struct fpga_inode *temp_int = find_dinode(demux_dev);
@ -603,41 +604,41 @@ int altera_pid_feed_control(void *demux_dev, int filt_nr,
} }
EXPORT_SYMBOL(altera_pid_feed_control); EXPORT_SYMBOL(altera_pid_feed_control);
int altera_ci_start_feed(struct dvb_demux_feed *feed, int num) static int altera_ci_start_feed(struct dvb_demux_feed *feed, int num)
{ {
altera_pid_feed_control(feed->demux, num, feed, 1); altera_pid_feed_control(feed->demux, num, feed, 1);
return 0; return 0;
} }
int altera_ci_stop_feed(struct dvb_demux_feed *feed, int num) static int altera_ci_stop_feed(struct dvb_demux_feed *feed, int num)
{ {
altera_pid_feed_control(feed->demux, num, feed, 0); altera_pid_feed_control(feed->demux, num, feed, 0);
return 0; return 0;
} }
int altera_ci_start_feed_1(struct dvb_demux_feed *feed) static int altera_ci_start_feed_1(struct dvb_demux_feed *feed)
{ {
return altera_ci_start_feed(feed, 1); return altera_ci_start_feed(feed, 1);
} }
int altera_ci_stop_feed_1(struct dvb_demux_feed *feed) static int altera_ci_stop_feed_1(struct dvb_demux_feed *feed)
{ {
return altera_ci_stop_feed(feed, 1); return altera_ci_stop_feed(feed, 1);
} }
int altera_ci_start_feed_2(struct dvb_demux_feed *feed) static int altera_ci_start_feed_2(struct dvb_demux_feed *feed)
{ {
return altera_ci_start_feed(feed, 2); return altera_ci_start_feed(feed, 2);
} }
int altera_ci_stop_feed_2(struct dvb_demux_feed *feed) static int altera_ci_stop_feed_2(struct dvb_demux_feed *feed)
{ {
return altera_ci_stop_feed(feed, 2); return altera_ci_stop_feed(feed, 2);
} }
int altera_hw_filt_init(struct altera_ci_config *config, int hw_filt_nr) static int altera_hw_filt_init(struct altera_ci_config *config, int hw_filt_nr)
{ {
struct netup_hw_pid_filter *pid_filt = NULL; struct netup_hw_pid_filter *pid_filt = NULL;
struct fpga_inode *temp_int = find_inode(config->dev); struct fpga_inode *temp_int = find_inode(config->dev);

17
drivers/media/pci/cx23885/cimax2.c
View file

@ -24,6 +24,7 @@
*/ */
#include "cx23885.h" #include "cx23885.h"
#include "cimax2.h"
#include "dvb_ca_en50221.h" #include "dvb_ca_en50221.h"
/**** Bit definitions for MC417_RWD and MC417_OEN registers *** /**** Bit definitions for MC417_RWD and MC417_OEN registers ***
bits 31-16 bits 31-16
@ -87,7 +88,7 @@ struct netup_ci_state {
}; };
int netup_read_i2c(struct i2c_adapter *i2c_adap, u8 addr, u8 reg, static int netup_read_i2c(struct i2c_adapter *i2c_adap, u8 addr, u8 reg,
u8 *buf, int len) u8 *buf, int len)
{ {
int ret; int ret;
@ -120,7 +121,7 @@ int netup_read_i2c(struct i2c_adapter *i2c_adap, u8 addr, u8 reg,
return 0; return 0;
} }
int netup_write_i2c(struct i2c_adapter *i2c_adap, u8 addr, u8 reg, static int netup_write_i2c(struct i2c_adapter *i2c_adap, u8 addr, u8 reg,
u8 *buf, int len) u8 *buf, int len)
{ {
int ret; int ret;
@ -147,7 +148,7 @@ int netup_write_i2c(struct i2c_adapter *i2c_adap, u8 addr, u8 reg,
return 0; return 0;
} }
int netup_ci_get_mem(struct cx23885_dev *dev) static int netup_ci_get_mem(struct cx23885_dev *dev)
{ {
int mem; int mem;
unsigned long timeout = jiffies + msecs_to_jiffies(1); unsigned long timeout = jiffies + msecs_to_jiffies(1);
@ -166,7 +167,7 @@ int netup_ci_get_mem(struct cx23885_dev *dev)
return mem & 0xff; return mem & 0xff;
} }
int netup_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot, static int netup_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot,
u8 flag, u8 read, int addr, u8 data) u8 flag, u8 read, int addr, u8 data)
{ {
struct netup_ci_state *state = en50221->data; struct netup_ci_state *state = en50221->data;
@ -248,7 +249,8 @@ int netup_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221,
return netup_ci_op_cam(en50221, slot, 0, 0, addr, data); return netup_ci_op_cam(en50221, slot, 0, 0, addr, data);
} }
int netup_ci_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr) int netup_ci_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot,
u8 addr)
{ {
return netup_ci_op_cam(en50221, slot, NETUP_CI_CTL, return netup_ci_op_cam(en50221, slot, NETUP_CI_CTL,
NETUP_CI_RD, addr, 0); NETUP_CI_RD, addr, 0);
@ -295,7 +297,7 @@ int netup_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot)
return 0; return 0;
} }
int netup_ci_set_irq(struct dvb_ca_en50221 *en50221, u8 irq_mode) static int netup_ci_set_irq(struct dvb_ca_en50221 *en50221, u8 irq_mode)
{ {
struct netup_ci_state *state = en50221->data; struct netup_ci_state *state = en50221->data;
int ret; int ret;
@ -399,7 +401,8 @@ int netup_ci_slot_status(struct cx23885_dev *dev, u32 pci_status)
return 1; return 1;
} }
int netup_poll_ci_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open) int netup_poll_ci_slot_status(struct dvb_ca_en50221 *en50221,
int slot, int open)
{ {
struct netup_ci_state *state = en50221->data; struct netup_ci_state *state = en50221->data;

6
drivers/media/pci/cx23885/cx23885-alsa.c
View file

@ -45,8 +45,10 @@
#define AUDIO_SRAM_CHANNEL SRAM_CH07 #define AUDIO_SRAM_CHANNEL SRAM_CH07
#define dprintk(level, fmt, arg...) if (audio_debug >= level) \ #define dprintk(level, fmt, arg...) do { \
printk(KERN_INFO "%s: " fmt, chip->dev->name , ## arg) if (audio_debug + 1 > level) \
printk(KERN_INFO "%s: " fmt, chip->dev->name , ## arg); \
} while(0)
#define dprintk_core(level, fmt, arg...) if (audio_debug >= level) \ #define dprintk_core(level, fmt, arg...) if (audio_debug >= level) \
printk(KERN_DEBUG "%s: " fmt, chip->dev->name , ## arg) printk(KERN_DEBUG "%s: " fmt, chip->dev->name , ## arg)

1
drivers/media/pci/cx23885/cx23885-av.c
View file

@ -22,6 +22,7 @@
*/ */
#include "cx23885.h" #include "cx23885.h"
#include "cx23885-av.h"
void cx23885_av_work_handler(struct work_struct *work) void cx23885_av_work_handler(struct work_struct *work)
{ {

2
drivers/media/pci/cx23885/cx23885-cards.c
View file

@ -1427,7 +1427,7 @@ void cx23885_ir_fini(struct cx23885_dev *dev)
} }
} }
int netup_jtag_io(void *device, int tms, int tdi, int read_tdo) static int netup_jtag_io(void *device, int tms, int tdi, int read_tdo)
{ {
int data; int data;
int tdo = 0; int tdo = 0;

8
drivers/media/pci/cx23885/cx23885-core.c
View file

@ -303,7 +303,7 @@ static struct sram_channel cx23887_sram_channels[] = {
}, },
}; };
void cx23885_irq_add(struct cx23885_dev *dev, u32 mask) static void cx23885_irq_add(struct cx23885_dev *dev, u32 mask)
{ {
unsigned long flags; unsigned long flags;
spin_lock_irqsave(&dev->pci_irqmask_lock, flags); spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
@ -1516,8 +1516,7 @@ int cx23885_restart_queue(struct cx23885_tsport *port,
buf = list_entry(q->queued.next, struct cx23885_buffer, buf = list_entry(q->queued.next, struct cx23885_buffer,
vb.queue); vb.queue);
if (NULL == prev) { if (NULL == prev) {
list_del(&buf->vb.queue); list_move_tail(&buf->vb.queue, &q->active);
list_add_tail(&buf->vb.queue, &q->active);
cx23885_start_dma(port, q, buf); cx23885_start_dma(port, q, buf);
buf->vb.state = VIDEOBUF_ACTIVE; buf->vb.state = VIDEOBUF_ACTIVE;
buf->count = q->count++; buf->count = q->count++;
@ -1528,8 +1527,7 @@ int cx23885_restart_queue(struct cx23885_tsport *port,
} else if (prev->vb.width == buf->vb.width && } else if (prev->vb.width == buf->vb.width &&
prev->vb.height == buf->vb.height && prev->vb.height == buf->vb.height &&
prev->fmt == buf->fmt) { prev->fmt == buf->fmt) {
list_del(&buf->vb.queue); list_move_tail(&buf->vb.queue, &q->active);
list_add_tail(&buf->vb.queue, &q->active);
buf->vb.state = VIDEOBUF_ACTIVE; buf->vb.state = VIDEOBUF_ACTIVE;
buf->count = q->count++; buf->count = q->count++;
prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);

2
drivers/media/pci/cx23885/cx23885-dvb.c
View file

@ -659,7 +659,7 @@ static struct mt2063_config terratec_mt2063_config[] = {
}, },
}; };
int netup_altera_fpga_rw(void *device, int flag, int data, int read) static int netup_altera_fpga_rw(void *device, int flag, int data, int read)
{ {
struct cx23885_dev *dev = (struct cx23885_dev *)device; struct cx23885_dev *dev = (struct cx23885_dev *)device;
unsigned long timeout = jiffies + msecs_to_jiffies(1); unsigned long timeout = jiffies + msecs_to_jiffies(1);

1
drivers/media/pci/cx23885/cx23885-f300.c
View file

@ -29,6 +29,7 @@
*/ */
#include "cx23885.h" #include "cx23885.h"
#include "cx23885-f300.h"
#define F300_DATA GPIO_0 #define F300_DATA GPIO_0
#define F300_RESET GPIO_1 #define F300_RESET GPIO_1

7
drivers/media/pci/cx23885/cx23885-input.c
View file

@ -40,6 +40,7 @@
#include <media/v4l2-subdev.h> #include <media/v4l2-subdev.h>
#include "cx23885.h" #include "cx23885.h"
#include "cx23885-input.h"
#define MODULE_NAME "cx23885" #define MODULE_NAME "cx23885"
@ -270,21 +271,21 @@ int cx23885_input_init(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1250: case CX23885_BOARD_HAUPPAUGE_HVR1250:
/* Integrated CX2388[58] IR controller */ /* Integrated CX2388[58] IR controller */
driver_type = RC_DRIVER_IR_RAW; driver_type = RC_DRIVER_IR_RAW;
allowed_protos = RC_TYPE_ALL; allowed_protos = RC_BIT_ALL;
/* The grey Hauppauge RC-5 remote */ /* The grey Hauppauge RC-5 remote */
rc_map = RC_MAP_HAUPPAUGE; rc_map = RC_MAP_HAUPPAUGE;
break; break;
case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
/* Integrated CX23885 IR controller */ /* Integrated CX23885 IR controller */
driver_type = RC_DRIVER_IR_RAW; driver_type = RC_DRIVER_IR_RAW;
allowed_protos = RC_TYPE_NEC; allowed_protos = RC_BIT_NEC;
/* The grey Terratec remote with orange buttons */ /* The grey Terratec remote with orange buttons */
rc_map = RC_MAP_NEC_TERRATEC_CINERGY_XS; rc_map = RC_MAP_NEC_TERRATEC_CINERGY_XS;
break; break;
case CX23885_BOARD_TEVII_S470: case CX23885_BOARD_TEVII_S470:
/* Integrated CX23885 IR controller */ /* Integrated CX23885 IR controller */
driver_type = RC_DRIVER_IR_RAW; driver_type = RC_DRIVER_IR_RAW;
allowed_protos = RC_TYPE_ALL; allowed_protos = RC_BIT_ALL;
/* A guess at the remote */ /* A guess at the remote */
rc_map = RC_MAP_TEVII_NEC; rc_map = RC_MAP_TEVII_NEC;
break; break;

2
drivers/media/pci/cx23885/cx23885-input.h
View file

@ -23,7 +23,7 @@
#ifndef _CX23885_INPUT_H_ #ifndef _CX23885_INPUT_H_
#define _CX23885_INPUT_H_ #define _CX23885_INPUT_H_
int cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events); void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events);
int cx23885_input_init(struct cx23885_dev *dev); int cx23885_input_init(struct cx23885_dev *dev);
void cx23885_input_fini(struct cx23885_dev *dev); void cx23885_input_fini(struct cx23885_dev *dev);

2
drivers/media/pci/cx23885/cx23885-ioctl.c
View file

@ -22,6 +22,8 @@
*/ */
#include "cx23885.h" #include "cx23885.h"
#include "cx23885-ioctl.h"
#include <media/v4l2-chip-ident.h> #include <media/v4l2-chip-ident.h>
int cx23885_g_chip_ident(struct file *file, void *fh, int cx23885_g_chip_ident(struct file *file, void *fh,

1
drivers/media/pci/cx23885/cx23885-ir.c
View file

@ -24,6 +24,7 @@
#include <media/v4l2-device.h> #include <media/v4l2-device.h>
#include "cx23885.h" #include "cx23885.h"
#include "cx23885-ir.h"
#include "cx23885-input.h" #include "cx23885-input.h"
#define CX23885_IR_RX_FIFO_SERVICE_REQ 0 #define CX23885_IR_RX_FIFO_SERVICE_REQ 0

1
drivers/media/pci/cx23885/cx23888-ir.c
View file

@ -29,6 +29,7 @@
#include <media/rc-core.h> #include <media/rc-core.h>
#include "cx23885.h" #include "cx23885.h"
#include "cx23888-ir.h"
static unsigned int ir_888_debug; static unsigned int ir_888_debug;
module_param(ir_888_debug, int, 0644); module_param(ir_888_debug, int, 0644);

1
drivers/media/pci/cx23885/netup-init.c
View file

@ -24,6 +24,7 @@
*/ */
#include "cx23885.h" #include "cx23885.h"
#include "netup-init.h"
static void i2c_av_write(struct i2c_adapter *i2c, u16 reg, u8 val) static void i2c_av_write(struct i2c_adapter *i2c, u16 reg, u8 val)
{ {

40
drivers/media/pci/cx25821/cx25821-audio-upstream.c
View file

@ -44,7 +44,7 @@ MODULE_LICENSE("GPL");
static int _intr_msk = FLD_AUD_SRC_RISCI1 | FLD_AUD_SRC_OF | static int _intr_msk = FLD_AUD_SRC_RISCI1 | FLD_AUD_SRC_OF |
FLD_AUD_SRC_SYNC | FLD_AUD_SRC_OPC_ERR; FLD_AUD_SRC_SYNC | FLD_AUD_SRC_OPC_ERR;
int cx25821_sram_channel_setup_upstream_audio(struct cx25821_dev *dev, static int cx25821_sram_channel_setup_upstream_audio(struct cx25821_dev *dev,
struct sram_channel *ch, struct sram_channel *ch,
unsigned int bpl, u32 risc) unsigned int bpl, u32 risc)
{ {
@ -133,7 +133,7 @@ static __le32 *cx25821_risc_field_upstream_audio(struct cx25821_dev *dev,
return rp; return rp;
} }
int cx25821_risc_buffer_upstream_audio(struct cx25821_dev *dev, static int cx25821_risc_buffer_upstream_audio(struct cx25821_dev *dev,
struct pci_dev *pci, struct pci_dev *pci,
unsigned int bpl, unsigned int lines) unsigned int bpl, unsigned int lines)
{ {
@ -197,7 +197,7 @@ int cx25821_risc_buffer_upstream_audio(struct cx25821_dev *dev,
return 0; return 0;
} }
void cx25821_free_memory_audio(struct cx25821_dev *dev) static void cx25821_free_memory_audio(struct cx25821_dev *dev)
{ {
if (dev->_risc_virt_addr) { if (dev->_risc_virt_addr) {
pci_free_consistent(dev->pci, dev->_audiorisc_size, pci_free_consistent(dev->pci, dev->_audiorisc_size,
@ -256,7 +256,7 @@ void cx25821_free_mem_upstream_audio(struct cx25821_dev *dev)
cx25821_free_memory_audio(dev); cx25821_free_memory_audio(dev);
} }
int cx25821_get_audio_data(struct cx25821_dev *dev, static int cx25821_get_audio_data(struct cx25821_dev *dev,
struct sram_channel *sram_ch) struct sram_channel *sram_ch)
{ {
struct file *myfile; struct file *myfile;
@ -351,7 +351,7 @@ static void cx25821_audioups_handler(struct work_struct *work)
sram_channels); sram_channels);
} }
int cx25821_openfile_audio(struct cx25821_dev *dev, static int cx25821_openfile_audio(struct cx25821_dev *dev,
struct sram_channel *sram_ch) struct sram_channel *sram_ch)
{ {
struct file *myfile; struct file *myfile;
@ -490,7 +490,7 @@ error:
return ret; return ret;
} }
int cx25821_audio_upstream_irq(struct cx25821_dev *dev, int chan_num, static int cx25821_audio_upstream_irq(struct cx25821_dev *dev, int chan_num,
u32 status) u32 status)
{ {
int i = 0; int i = 0;
@ -634,7 +634,7 @@ static void cx25821_wait_fifo_enable(struct cx25821_dev *dev,
} }
int cx25821_start_audio_dma_upstream(struct cx25821_dev *dev, static int cx25821_start_audio_dma_upstream(struct cx25821_dev *dev,
struct sram_channel *sram_ch) struct sram_channel *sram_ch)
{ {
u32 tmp = 0; u32 tmp = 0;
@ -700,9 +700,7 @@ fail_irq:
int cx25821_audio_upstream_init(struct cx25821_dev *dev, int channel_select) int cx25821_audio_upstream_init(struct cx25821_dev *dev, int channel_select)
{ {
struct sram_channel *sram_ch; struct sram_channel *sram_ch;
int retval = 0;
int err = 0; int err = 0;
int str_length = 0;
if (dev->_audio_is_running) { if (dev->_audio_is_running) {
pr_warn("Audio Channel is still running so return!\n"); pr_warn("Audio Channel is still running so return!\n");
@ -731,26 +729,28 @@ int cx25821_audio_upstream_init(struct cx25821_dev *dev, int channel_select)
_line_size = AUDIO_LINE_SIZE; _line_size = AUDIO_LINE_SIZE;
if (dev->input_audiofilename) { if (dev->input_audiofilename) {
str_length = strlen(dev->input_audiofilename); dev->_audiofilename = kstrdup(dev->input_audiofilename,
dev->_audiofilename = kmemdup(dev->input_audiofilename, GFP_KERNEL);
str_length + 1, GFP_KERNEL);
if (!dev->_audiofilename) if (!dev->_audiofilename) {
err = -ENOMEM;
goto error; goto error;
}
/* Default if filename is empty string */ /* Default if filename is empty string */
if (strcmp(dev->input_audiofilename, "") == 0) if (strcmp(dev->input_audiofilename, "") == 0)
dev->_audiofilename = "/root/audioGOOD.wav"; dev->_audiofilename = "/root/audioGOOD.wav";
} else { } else {
str_length = strlen(_defaultAudioName); dev->_audiofilename = kstrdup(_defaultAudioName,
dev->_audiofilename = kmemdup(_defaultAudioName, GFP_KERNEL);
str_length + 1, GFP_KERNEL);
if (!dev->_audiofilename) if (!dev->_audiofilename) {
err = -ENOMEM;
goto error; goto error;
} }
}
retval = cx25821_sram_channel_setup_upstream_audio(dev, sram_ch, cx25821_sram_channel_setup_upstream_audio(dev, sram_ch,
_line_size, 0); _line_size, 0);
dev->audio_upstream_riscbuf_size = dev->audio_upstream_riscbuf_size =
@ -759,9 +759,9 @@ int cx25821_audio_upstream_init(struct cx25821_dev *dev, int channel_select)
dev->audio_upstream_databuf_size = AUDIO_DATA_BUF_SZ * NUM_AUDIO_PROGS; dev->audio_upstream_databuf_size = AUDIO_DATA_BUF_SZ * NUM_AUDIO_PROGS;
/* Allocating buffers and prepare RISC program */ /* Allocating buffers and prepare RISC program */
retval = cx25821_audio_upstream_buffer_prepare(dev, sram_ch, err = cx25821_audio_upstream_buffer_prepare(dev, sram_ch,
_line_size); _line_size);
if (retval < 0) { if (err < 0) {
pr_err("%s: Failed to set up Audio upstream buffers!\n", pr_err("%s: Failed to set up Audio upstream buffers!\n",
dev->name); dev->name);
goto error; goto error;

6
drivers/media/pci/cx25821/cx25821-biffuncs.h
View file

@ -25,17 +25,17 @@
#define SetBit(Bit) (1 << Bit) #define SetBit(Bit) (1 << Bit)
inline u8 getBit(u32 sample, u8 index) static inline u8 getBit(u32 sample, u8 index)
{ {
return (u8) ((sample >> index) & 1); return (u8) ((sample >> index) & 1);
} }
inline u32 clearBitAtPos(u32 value, u8 bit) static inline u32 clearBitAtPos(u32 value, u8 bit)
{ {
return value & ~(1 << bit); return value & ~(1 << bit);
} }
inline u32 setBitAtPos(u32 sample, u8 bit) static inline u32 setBitAtPos(u32 sample, u8 bit)
{ {
sample |= (1 << bit); sample |= (1 << bit);
return sample; return sample;

4
drivers/media/pci/cx25821/cx25821-i2c.c
View file

@ -329,7 +329,8 @@ int cx25821_i2c_unregister(struct cx25821_i2c *bus)
return 0; return 0;
} }
void cx25821_av_clk(struct cx25821_dev *dev, int enable) #if 0 /* Currently unused */
static void cx25821_av_clk(struct cx25821_dev *dev, int enable)
{ {
/* write 0 to bus 2 addr 0x144 via i2x_xfer() */ /* write 0 to bus 2 addr 0x144 via i2x_xfer() */
char buffer[3]; char buffer[3];
@ -351,6 +352,7 @@ void cx25821_av_clk(struct cx25821_dev *dev, int enable)
i2c_xfer(&dev->i2c_bus[0].i2c_adap, &msg, 1); i2c_xfer(&dev->i2c_bus[0].i2c_adap, &msg, 1);
} }
#endif
int cx25821_i2c_read(struct cx25821_i2c *bus, u16 reg_addr, int *value) int cx25821_i2c_read(struct cx25821_i2c *bus, u16 reg_addr, int *value)
{ {

44
drivers/media/pci/cx25821/cx25821-video-upstream-ch2.c
View file

@ -123,9 +123,10 @@ static __le32 *cx25821_risc_field_upstream_ch2(struct cx25821_dev *dev,
return rp; return rp;
} }
int cx25821_risc_buffer_upstream_ch2(struct cx25821_dev *dev, static int cx25821_risc_buffer_upstream_ch2(struct cx25821_dev *dev,
struct pci_dev *pci, struct pci_dev *pci,
unsigned int top_offset, unsigned int bpl, unsigned int top_offset,
unsigned int bpl,
unsigned int lines) unsigned int lines)
{ {
__le32 *rp; __le32 *rp;
@ -255,7 +256,8 @@ void cx25821_free_mem_upstream_ch2(struct cx25821_dev *dev)
} }
} }
int cx25821_get_frame_ch2(struct cx25821_dev *dev, struct sram_channel *sram_ch) static int cx25821_get_frame_ch2(struct cx25821_dev *dev,
struct sram_channel *sram_ch)
{ {
struct file *myfile; struct file *myfile;
int frame_index_temp = dev->_frame_index_ch2; int frame_index_temp = dev->_frame_index_ch2;
@ -360,7 +362,8 @@ static void cx25821_vidups_handler_ch2(struct work_struct *work)
_channel2_upstream_select].sram_channels); _channel2_upstream_select].sram_channels);
} }
int cx25821_openfile_ch2(struct cx25821_dev *dev, struct sram_channel *sram_ch) static int cx25821_openfile_ch2(struct cx25821_dev *dev,
struct sram_channel *sram_ch)
{ {
struct file *myfile; struct file *myfile;
int i = 0, j = 0; int i = 0, j = 0;
@ -507,7 +510,8 @@ error:
return ret; return ret;
} }
int cx25821_video_upstream_irq_ch2(struct cx25821_dev *dev, int chan_num, static int cx25821_video_upstream_irq_ch2(struct cx25821_dev *dev,
int chan_num,
u32 status) u32 status)
{ {
u32 int_msk_tmp; u32 int_msk_tmp;
@ -647,7 +651,7 @@ static void cx25821_set_pixelengine_ch2(struct cx25821_dev *dev,
cx_write(ch->vid_cdt_size, VID_CDT_SIZE >> 3); cx_write(ch->vid_cdt_size, VID_CDT_SIZE >> 3);
} }
int cx25821_start_video_dma_upstream_ch2(struct cx25821_dev *dev, static int cx25821_start_video_dma_upstream_ch2(struct cx25821_dev *dev,
struct sram_channel *sram_ch) struct sram_channel *sram_ch)
{ {
u32 tmp = 0; u32 tmp = 0;
@ -704,11 +708,9 @@ int cx25821_vidupstream_init_ch2(struct cx25821_dev *dev, int channel_select,
{ {
struct sram_channel *sram_ch; struct sram_channel *sram_ch;
u32 tmp; u32 tmp;
int retval = 0;
int err = 0; int err = 0;
int data_frame_size = 0; int data_frame_size = 0;
int risc_buffer_size = 0; int risc_buffer_size = 0;
int str_length = 0;
if (dev->_is_running_ch2) { if (dev->_is_running_ch2) {
pr_info("Video Channel is still running so return!\n"); pr_info("Video Channel is still running so return!\n");
@ -744,19 +746,15 @@ int cx25821_vidupstream_init_ch2(struct cx25821_dev *dev, int channel_select,
risc_buffer_size = dev->_isNTSC_ch2 ? risc_buffer_size = dev->_isNTSC_ch2 ?
NTSC_RISC_BUF_SIZE : PAL_RISC_BUF_SIZE; NTSC_RISC_BUF_SIZE : PAL_RISC_BUF_SIZE;
if (dev->input_filename_ch2) { if (dev->input_filename_ch2)
str_length = strlen(dev->input_filename_ch2); dev->_filename_ch2 = kstrdup(dev->input_filename_ch2,
dev->_filename_ch2 = kmemdup(dev->input_filename_ch2, GFP_KERNEL);
str_length + 1, GFP_KERNEL); else
dev->_filename_ch2 = kstrdup(dev->_defaultname_ch2,
GFP_KERNEL);
if (!dev->_filename_ch2) if (!dev->_filename_ch2) {
goto error; err = -ENOENT;
} else {
str_length = strlen(dev->_defaultname_ch2);
dev->_filename_ch2 = kmemdup(dev->_defaultname_ch2,
str_length + 1, GFP_KERNEL);
if (!dev->_filename_ch2)
goto error; goto error;
} }
@ -773,7 +771,7 @@ int cx25821_vidupstream_init_ch2(struct cx25821_dev *dev, int channel_select,
} }
} }
retval = cx25821_sram_channel_setup_upstream(dev, sram_ch, err = cx25821_sram_channel_setup_upstream(dev, sram_ch,
dev->_line_size_ch2, 0); dev->_line_size_ch2, 0);
/* setup fifo + format */ /* setup fifo + format */
@ -783,9 +781,9 @@ int cx25821_vidupstream_init_ch2(struct cx25821_dev *dev, int channel_select,
dev->upstream_databuf_size_ch2 = data_frame_size * 2; dev->upstream_databuf_size_ch2 = data_frame_size * 2;
/* Allocating buffers and prepare RISC program */ /* Allocating buffers and prepare RISC program */
retval = cx25821_upstream_buffer_prepare_ch2(dev, sram_ch, err = cx25821_upstream_buffer_prepare_ch2(dev, sram_ch,
dev->_line_size_ch2); dev->_line_size_ch2);
if (retval < 0) { if (err < 0) {
pr_err("%s: Failed to set up Video upstream buffers!\n", pr_err("%s: Failed to set up Video upstream buffers!\n",
dev->name); dev->name);
goto error; goto error;

35
drivers/media/pci/cx25821/cx25821-video-upstream.c
View file

@ -173,7 +173,7 @@ static __le32 *cx25821_risc_field_upstream(struct cx25821_dev *dev, __le32 * rp,
return rp; return rp;
} }
int cx25821_risc_buffer_upstream(struct cx25821_dev *dev, static int cx25821_risc_buffer_upstream(struct cx25821_dev *dev,
struct pci_dev *pci, struct pci_dev *pci,
unsigned int top_offset, unsigned int top_offset,
unsigned int bpl, unsigned int lines) unsigned int bpl, unsigned int lines)
@ -300,7 +300,8 @@ void cx25821_free_mem_upstream_ch1(struct cx25821_dev *dev)
} }
} }
int cx25821_get_frame(struct cx25821_dev *dev, struct sram_channel *sram_ch) static int cx25821_get_frame(struct cx25821_dev *dev,
struct sram_channel *sram_ch)
{ {
struct file *myfile; struct file *myfile;
int frame_index_temp = dev->_frame_index; int frame_index_temp = dev->_frame_index;
@ -405,7 +406,8 @@ static void cx25821_vidups_handler(struct work_struct *work)
sram_channels); sram_channels);
} }
int cx25821_openfile(struct cx25821_dev *dev, struct sram_channel *sram_ch) static int cx25821_openfile(struct cx25821_dev *dev,
struct sram_channel *sram_ch)
{ {
struct file *myfile; struct file *myfile;
int i = 0, j = 0; int i = 0, j = 0;
@ -486,8 +488,9 @@ int cx25821_openfile(struct cx25821_dev *dev, struct sram_channel *sram_ch)
return 0; return 0;
} }
int cx25821_upstream_buffer_prepare(struct cx25821_dev *dev, static int cx25821_upstream_buffer_prepare(struct cx25821_dev *dev,
struct sram_channel *sram_ch, int bpl) struct sram_channel *sram_ch,
int bpl)
{ {
int ret = 0; int ret = 0;
dma_addr_t dma_addr; dma_addr_t dma_addr;
@ -548,7 +551,7 @@ error:
return ret; return ret;
} }
int cx25821_video_upstream_irq(struct cx25821_dev *dev, int chan_num, static int cx25821_video_upstream_irq(struct cx25821_dev *dev, int chan_num,
u32 status) u32 status)
{ {
u32 int_msk_tmp; u32 int_msk_tmp;
@ -664,7 +667,8 @@ static irqreturn_t cx25821_upstream_irq(int irq, void *dev_id)
return IRQ_RETVAL(handled); return IRQ_RETVAL(handled);
} }
void cx25821_set_pixelengine(struct cx25821_dev *dev, struct sram_channel *ch, static void cx25821_set_pixelengine(struct cx25821_dev *dev,
struct sram_channel *ch,
int pix_format) int pix_format)
{ {
int width = WIDTH_D1; int width = WIDTH_D1;
@ -696,7 +700,7 @@ void cx25821_set_pixelengine(struct cx25821_dev *dev, struct sram_channel *ch,
cx_write(ch->vid_cdt_size, VID_CDT_SIZE >> 3); cx_write(ch->vid_cdt_size, VID_CDT_SIZE >> 3);
} }
int cx25821_start_video_dma_upstream(struct cx25821_dev *dev, static int cx25821_start_video_dma_upstream(struct cx25821_dev *dev,
struct sram_channel *sram_ch) struct sram_channel *sram_ch)
{ {
u32 tmp = 0; u32 tmp = 0;
@ -753,7 +757,6 @@ int cx25821_vidupstream_init_ch1(struct cx25821_dev *dev, int channel_select,
{ {
struct sram_channel *sram_ch; struct sram_channel *sram_ch;
u32 tmp; u32 tmp;
int retval = 0;
int err = 0; int err = 0;
int data_frame_size = 0; int data_frame_size = 0;
int risc_buffer_size = 0; int risc_buffer_size = 0;
@ -796,16 +799,20 @@ int cx25821_vidupstream_init_ch1(struct cx25821_dev *dev, int channel_select,
dev->_filename = kmemdup(dev->input_filename, str_length + 1, dev->_filename = kmemdup(dev->input_filename, str_length + 1,
GFP_KERNEL); GFP_KERNEL);
if (!dev->_filename) if (!dev->_filename) {
err = -ENOENT;
goto error; goto error;
}
} else { } else {
str_length = strlen(dev->_defaultname); str_length = strlen(dev->_defaultname);
dev->_filename = kmemdup(dev->_defaultname, str_length + 1, dev->_filename = kmemdup(dev->_defaultname, str_length + 1,
GFP_KERNEL); GFP_KERNEL);
if (!dev->_filename) if (!dev->_filename) {
err = -ENOENT;
goto error; goto error;
} }
}
/* Default if filename is empty string */ /* Default if filename is empty string */
if (strcmp(dev->_filename, "") == 0) { if (strcmp(dev->_filename, "") == 0) {
@ -828,7 +835,7 @@ int cx25821_vidupstream_init_ch1(struct cx25821_dev *dev, int channel_select,
dev->_line_size = (dev->_pixel_format == PIXEL_FRMT_422) ? dev->_line_size = (dev->_pixel_format == PIXEL_FRMT_422) ?
(WIDTH_D1 * 2) : (WIDTH_D1 * 3) / 2; (WIDTH_D1 * 2) : (WIDTH_D1 * 3) / 2;
retval = cx25821_sram_channel_setup_upstream(dev, sram_ch, err = cx25821_sram_channel_setup_upstream(dev, sram_ch,
dev->_line_size, 0); dev->_line_size, 0);
/* setup fifo + format */ /* setup fifo + format */
@ -838,8 +845,8 @@ int cx25821_vidupstream_init_ch1(struct cx25821_dev *dev, int channel_select,
dev->upstream_databuf_size = data_frame_size * 2; dev->upstream_databuf_size = data_frame_size * 2;
/* Allocating buffers and prepare RISC program */ /* Allocating buffers and prepare RISC program */
retval = cx25821_upstream_buffer_prepare(dev, sram_ch, dev->_line_size); err = cx25821_upstream_buffer_prepare(dev, sram_ch, dev->_line_size);
if (retval < 0) { if (err < 0) {
pr_err("%s: Failed to set up Video upstream buffers!\n", pr_err("%s: Failed to set up Video upstream buffers!\n",
dev->name); dev->name);
goto error; goto error;

4
drivers/media/pci/cx25821/cx25821-video.c
View file

@ -291,7 +291,7 @@ int cx25821_start_video_dma(struct cx25821_dev *dev,
return 0; return 0;
} }
int cx25821_restart_video_queue(struct cx25821_dev *dev, static int cx25821_restart_video_queue(struct cx25821_dev *dev,
struct cx25821_dmaqueue *q, struct cx25821_dmaqueue *q,
struct sram_channel *channel) struct sram_channel *channel)
{ {
@ -342,7 +342,7 @@ int cx25821_restart_video_queue(struct cx25821_dev *dev,
} }
} }
void cx25821_vid_timeout(unsigned long data) static void cx25821_vid_timeout(unsigned long data)
{ {
struct cx25821_data *timeout_data = (struct cx25821_data *)data; struct cx25821_data *timeout_data = (struct cx25821_data *)data;
struct cx25821_dev *dev = timeout_data->dev; struct cx25821_dev *dev = timeout_data->dev;

12
drivers/media/pci/cx88/cx88-alsa.c
View file

@ -45,11 +45,15 @@
#include "cx88.h" #include "cx88.h"
#include "cx88-reg.h" #include "cx88-reg.h"
#define dprintk(level,fmt, arg...) if (debug >= level) \ #define dprintk(level, fmt, arg...) do { \
printk(KERN_INFO "%s/1: " fmt, chip->core->name , ## arg) if (debug + 1 > level) \
printk(KERN_INFO "%s/1: " fmt, chip->core->name , ## arg);\
} while(0)
#define dprintk_core(level,fmt, arg...) if (debug >= level) \ #define dprintk_core(level, fmt, arg...) do { \
printk(KERN_DEBUG "%s/1: " fmt, chip->core->name , ## arg) if (debug + 1 > level) \
printk(KERN_DEBUG "%s/1: " fmt, chip->core->name , ## arg);\
} while(0)
/**************************************************************************** /****************************************************************************
Data type declarations - Can be moded to a header file later Data type declarations - Can be moded to a header file later

7
drivers/media/pci/cx88/cx88-blackbird.c
View file

@ -53,9 +53,10 @@ static unsigned int debug;
module_param(debug,int,0644); module_param(debug,int,0644);
MODULE_PARM_DESC(debug,"enable debug messages [blackbird]"); MODULE_PARM_DESC(debug,"enable debug messages [blackbird]");
#define dprintk(level,fmt, arg...) if (debug >= level) \ #define dprintk(level, fmt, arg...) do { \
printk(KERN_DEBUG "%s/2-bb: " fmt, dev->core->name , ## arg) if (debug + 1 > level) \
printk(KERN_DEBUG "%s/2-bb: " fmt, dev->core->name , ## arg); \
} while(0)
/* ------------------------------------------------------------------ */ /* ------------------------------------------------------------------ */

12
drivers/media/pci/cx88/cx88-core.c
View file

@ -646,22 +646,22 @@ int cx88_reset(struct cx88_core *core)
/* ------------------------------------------------------------------ */ /* ------------------------------------------------------------------ */
static unsigned int inline norm_swidth(v4l2_std_id norm) static inline unsigned int norm_swidth(v4l2_std_id norm)
{ {
return (norm & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 754 : 922; return (norm & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 754 : 922;
} }
static unsigned int inline norm_hdelay(v4l2_std_id norm) static inline unsigned int norm_hdelay(v4l2_std_id norm)
{ {
return (norm & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 135 : 186; return (norm & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 135 : 186;
} }
static unsigned int inline norm_vdelay(v4l2_std_id norm) static inline unsigned int norm_vdelay(v4l2_std_id norm)
{ {
return (norm & V4L2_STD_625_50) ? 0x24 : 0x18; return (norm & V4L2_STD_625_50) ? 0x24 : 0x18;
} }
static unsigned int inline norm_fsc8(v4l2_std_id norm) static inline unsigned int norm_fsc8(v4l2_std_id norm)
{ {
if (norm & V4L2_STD_PAL_M) if (norm & V4L2_STD_PAL_M)
return 28604892; // 3.575611 MHz return 28604892; // 3.575611 MHz
@ -681,7 +681,7 @@ static unsigned int inline norm_fsc8(v4l2_std_id norm)
return 35468950; // 4.43361875 MHz +/- 5 Hz return 35468950; // 4.43361875 MHz +/- 5 Hz
} }
static unsigned int inline norm_htotal(v4l2_std_id norm) static inline unsigned int norm_htotal(v4l2_std_id norm)
{ {
unsigned int fsc4=norm_fsc8(norm)/2; unsigned int fsc4=norm_fsc8(norm)/2;
@ -692,7 +692,7 @@ static unsigned int inline norm_htotal(v4l2_std_id norm)
((fsc4+262)/525*1001+15000)/30000; ((fsc4+262)/525*1001+15000)/30000;
} }
static unsigned int inline norm_vbipack(v4l2_std_id norm) static inline unsigned int norm_vbipack(v4l2_std_id norm)
{ {
return (norm & V4L2_STD_625_50) ? 511 : 400; return (norm & V4L2_STD_625_50) ? 511 : 400;
} }

8
drivers/media/pci/cx88/cx88-input.c
View file

@ -248,7 +248,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
struct cx88_IR *ir; struct cx88_IR *ir;
struct rc_dev *dev; struct rc_dev *dev;
char *ir_codes = NULL; char *ir_codes = NULL;
u64 rc_type = RC_TYPE_OTHER; u64 rc_type = RC_BIT_OTHER;
int err = -ENOMEM; int err = -ENOMEM;
u32 hardware_mask = 0; /* For devices with a hardware mask, when u32 hardware_mask = 0; /* For devices with a hardware mask, when
* used with a full-code IR table * used with a full-code IR table
@ -416,7 +416,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
break; break;
case CX88_BOARD_TWINHAN_VP1027_DVBS: case CX88_BOARD_TWINHAN_VP1027_DVBS:
ir_codes = RC_MAP_TWINHAN_VP1027_DVBS; ir_codes = RC_MAP_TWINHAN_VP1027_DVBS;
rc_type = RC_TYPE_NEC; rc_type = RC_BIT_NEC;
ir->sampling = 0xff00; /* address */ ir->sampling = 0xff00; /* address */
break; break;
} }
@ -592,7 +592,7 @@ void cx88_i2c_init_ir(struct cx88_core *core)
case CX88_BOARD_LEADTEK_PVR2000: case CX88_BOARD_LEADTEK_PVR2000:
addr_list = pvr2000_addr_list; addr_list = pvr2000_addr_list;
core->init_data.name = "cx88 Leadtek PVR 2000 remote"; core->init_data.name = "cx88 Leadtek PVR 2000 remote";
core->init_data.type = RC_TYPE_UNKNOWN; core->init_data.type = RC_BIT_UNKNOWN;
core->init_data.get_key = get_key_pvr2000; core->init_data.get_key = get_key_pvr2000;
core->init_data.ir_codes = RC_MAP_EMPTY; core->init_data.ir_codes = RC_MAP_EMPTY;
break; break;
@ -613,7 +613,7 @@ void cx88_i2c_init_ir(struct cx88_core *core)
/* Hauppauge XVR */ /* Hauppauge XVR */
core->init_data.name = "cx88 Hauppauge XVR remote"; core->init_data.name = "cx88 Hauppauge XVR remote";
core->init_data.ir_codes = RC_MAP_HAUPPAUGE; core->init_data.ir_codes = RC_MAP_HAUPPAUGE;
core->init_data.type = RC_TYPE_RC5; core->init_data.type = RC_BIT_RC5;
core->init_data.internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR; core->init_data.internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
info.platform_data = &core->init_data; info.platform_data = &core->init_data;

18
drivers/media/pci/cx88/cx88-mpeg.c
View file

@ -45,11 +45,15 @@ static unsigned int debug;
module_param(debug,int,0644); module_param(debug,int,0644);
MODULE_PARM_DESC(debug,"enable debug messages [mpeg]"); MODULE_PARM_DESC(debug,"enable debug messages [mpeg]");
#define dprintk(level,fmt, arg...) if (debug >= level) \ #define dprintk(level, fmt, arg...) do { \
printk(KERN_DEBUG "%s/2-mpeg: " fmt, dev->core->name, ## arg) if (debug + 1 > level) \
printk(KERN_DEBUG "%s/2-mpeg: " fmt, dev->core->name, ## arg); \
} while(0)
#define mpeg_dbg(level,fmt, arg...) if (debug >= level) \ #define mpeg_dbg(level, fmt, arg...) do { \
printk(KERN_DEBUG "%s/2-mpeg: " fmt, core->name, ## arg) if (debug + 1 > level) \
printk(KERN_DEBUG "%s/2-mpeg: " fmt, core->name, ## arg); \
} while(0)
#if defined(CONFIG_MODULES) && defined(MODULE) #if defined(CONFIG_MODULES) && defined(MODULE)
static void request_module_async(struct work_struct *work) static void request_module_async(struct work_struct *work)
@ -217,8 +221,7 @@ static int cx8802_restart_queue(struct cx8802_dev *dev,
return 0; return 0;
buf = list_entry(q->queued.next, struct cx88_buffer, vb.queue); buf = list_entry(q->queued.next, struct cx88_buffer, vb.queue);
if (NULL == prev) { if (NULL == prev) {
list_del(&buf->vb.queue); list_move_tail(&buf->vb.queue, &q->active);
list_add_tail(&buf->vb.queue,&q->active);
cx8802_start_dma(dev, q, buf); cx8802_start_dma(dev, q, buf);
buf->vb.state = VIDEOBUF_ACTIVE; buf->vb.state = VIDEOBUF_ACTIVE;
buf->count = q->count++; buf->count = q->count++;
@ -229,8 +232,7 @@ static int cx8802_restart_queue(struct cx8802_dev *dev,
} else if (prev->vb.width == buf->vb.width && } else if (prev->vb.width == buf->vb.width &&
prev->vb.height == buf->vb.height && prev->vb.height == buf->vb.height &&
prev->fmt == buf->fmt) { prev->fmt == buf->fmt) {
list_del(&buf->vb.queue); list_move_tail(&buf->vb.queue, &q->active);
list_add_tail(&buf->vb.queue,&q->active);
buf->vb.state = VIDEOBUF_ACTIVE; buf->vb.state = VIDEOBUF_ACTIVE;
buf->count = q->count++; buf->count = q->count++;
prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);

4
drivers/media/pci/cx88/cx88.h
View file

@ -94,13 +94,13 @@ enum cx8802_board_access {
/* ----------------------------------------------------------- */ /* ----------------------------------------------------------- */
/* tv norms */ /* tv norms */
static unsigned int inline norm_maxw(v4l2_std_id norm) static inline unsigned int norm_maxw(v4l2_std_id norm)
{ {
return (norm & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 720 : 768; return (norm & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 720 : 768;
} }
static unsigned int inline norm_maxh(v4l2_std_id norm) static inline unsigned int norm_maxh(v4l2_std_id norm)
{ {
return (norm & V4L2_STD_625_50) ? 576 : 480; return (norm & V4L2_STD_625_50) ? 576 : 480;
} }

8
drivers/media/pci/dm1105/dm1105.c
View file

@ -736,7 +736,7 @@ static irqreturn_t dm1105_irq(int irq, void *dev_id)
return IRQ_HANDLED; return IRQ_HANDLED;
} }
int __devinit dm1105_ir_init(struct dm1105_dev *dm1105) static int __devinit dm1105_ir_init(struct dm1105_dev *dm1105)
{ {
struct rc_dev *dev; struct rc_dev *dev;
int err = -ENOMEM; int err = -ENOMEM;
@ -776,7 +776,7 @@ int __devinit dm1105_ir_init(struct dm1105_dev *dm1105)
return 0; return 0;
} }
void __devexit dm1105_ir_exit(struct dm1105_dev *dm1105) static void __devexit dm1105_ir_exit(struct dm1105_dev *dm1105)
{ {
rc_unregister_device(dm1105->ir.dev); rc_unregister_device(dm1105->ir.dev);
} }
@ -1128,8 +1128,10 @@ static int __devinit dm1105_probe(struct pci_dev *pdev,
INIT_WORK(&dev->work, dm1105_dmx_buffer); INIT_WORK(&dev->work, dm1105_dmx_buffer);
sprintf(dev->wqn, "%s/%d", dvb_adapter->name, dvb_adapter->num); sprintf(dev->wqn, "%s/%d", dvb_adapter->name, dvb_adapter->num);
dev->wq = create_singlethread_workqueue(dev->wqn); dev->wq = create_singlethread_workqueue(dev->wqn);
if (!dev->wq) if (!dev->wq) {
ret = -ENOMEM;
goto err_dvb_net; goto err_dvb_net;
}
ret = request_irq(pdev->irq, dm1105_irq, IRQF_SHARED, ret = request_irq(pdev->irq, dm1105_irq, IRQF_SHARED,
DRIVER_NAME, dev); DRIVER_NAME, dev);

2
drivers/media/pci/ivtv/ivtv-alsa-main.c
View file

@ -205,7 +205,7 @@ err_exit:
return ret; return ret;
} }
int ivtv_alsa_load(struct ivtv *itv) static int __init ivtv_alsa_load(struct ivtv *itv)
{ {
struct v4l2_device *v4l2_dev = &itv->v4l2_dev; struct v4l2_device *v4l2_dev = &itv->v4l2_dev;
struct ivtv_stream *s; struct ivtv_stream *s;

4
drivers/media/pci/ivtv/ivtv-alsa-pcm.c
View file

@ -37,6 +37,7 @@
#include "ivtv-streams.h" #include "ivtv-streams.h"
#include "ivtv-fileops.h" #include "ivtv-fileops.h"
#include "ivtv-alsa.h" #include "ivtv-alsa.h"
#include "ivtv-alsa-pcm.h"
static unsigned int pcm_debug; static unsigned int pcm_debug;
module_param(pcm_debug, int, 0644); module_param(pcm_debug, int, 0644);
@ -69,7 +70,8 @@ static struct snd_pcm_hardware snd_ivtv_hw_capture = {
.periods_max = 98, /* 12544, */ .periods_max = 98, /* 12544, */
}; };
void ivtv_alsa_announce_pcm_data(struct snd_ivtv_card *itvsc, u8 *pcm_data, static void ivtv_alsa_announce_pcm_data(struct snd_ivtv_card *itvsc,
u8 *pcm_data,
size_t num_bytes) size_t num_bytes)
{ {
struct snd_pcm_substream *substream; struct snd_pcm_substream *substream;

4
drivers/media/pci/ivtv/ivtv-alsa-pcm.h
View file

@ -21,7 +21,3 @@
*/ */
int __init snd_ivtv_pcm_create(struct snd_ivtv_card *itvsc); int __init snd_ivtv_pcm_create(struct snd_ivtv_card *itvsc);
/* Used by ivtv driver to announce the PCM data to the module */
void ivtv_alsa_announce_pcm_data(struct snd_ivtv_card *card, u8 *pcm_data,
size_t num_bytes);

2
drivers/media/pci/ivtv/ivtv-firmware.c
View file

@ -276,7 +276,7 @@ void ivtv_init_mpeg_decoder(struct ivtv *itv)
} }
/* Try to restart the card & restore previous settings */ /* Try to restart the card & restore previous settings */
int ivtv_firmware_restart(struct ivtv *itv) static int ivtv_firmware_restart(struct ivtv *itv)
{ {
int rc = 0; int rc = 0;
v4l2_std_id std; v4l2_std_id std;

8
drivers/media/pci/ivtv/ivtv-i2c.c
View file

@ -200,21 +200,21 @@ static int ivtv_i2c_new_ir(struct ivtv *itv, u32 hw, const char *type, u8 addr)
init_data->ir_codes = RC_MAP_AVERMEDIA_CARDBUS; init_data->ir_codes = RC_MAP_AVERMEDIA_CARDBUS;
init_data->internal_get_key_func = init_data->internal_get_key_func =
IR_KBD_GET_KEY_AVERMEDIA_CARDBUS; IR_KBD_GET_KEY_AVERMEDIA_CARDBUS;
init_data->type = RC_TYPE_OTHER; init_data->type = RC_BIT_OTHER;
init_data->name = "AVerMedia AVerTV card"; init_data->name = "AVerMedia AVerTV card";
break; break;
case IVTV_HW_I2C_IR_RX_HAUP_EXT: case IVTV_HW_I2C_IR_RX_HAUP_EXT:
case IVTV_HW_I2C_IR_RX_HAUP_INT: case IVTV_HW_I2C_IR_RX_HAUP_INT:
init_data->ir_codes = RC_MAP_HAUPPAUGE; init_data->ir_codes = RC_MAP_HAUPPAUGE;
init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP; init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP;
init_data->type = RC_TYPE_RC5; init_data->type = RC_BIT_RC5;
init_data->name = itv->card_name; init_data->name = itv->card_name;
break; break;
case IVTV_HW_Z8F0811_IR_RX_HAUP: case IVTV_HW_Z8F0811_IR_RX_HAUP:
/* Default to grey remote */ /* Default to grey remote */
init_data->ir_codes = RC_MAP_HAUPPAUGE; init_data->ir_codes = RC_MAP_HAUPPAUGE;
init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR; init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
init_data->type = RC_TYPE_RC5; init_data->type = RC_BIT_RC5;
init_data->name = itv->card_name; init_data->name = itv->card_name;
break; break;
case IVTV_HW_I2C_IR_RX_ADAPTEC: case IVTV_HW_I2C_IR_RX_ADAPTEC:
@ -222,7 +222,7 @@ static int ivtv_i2c_new_ir(struct ivtv *itv, u32 hw, const char *type, u8 addr)
init_data->name = itv->card_name; init_data->name = itv->card_name;
/* FIXME: The protocol and RC_MAP needs to be corrected */ /* FIXME: The protocol and RC_MAP needs to be corrected */
init_data->ir_codes = RC_MAP_EMPTY; init_data->ir_codes = RC_MAP_EMPTY;
init_data->type = RC_TYPE_UNKNOWN; init_data->type = RC_BIT_UNKNOWN;
break; break;
} }

4
drivers/media/pci/ivtv/ivtv-ioctl.c
View file

@ -993,7 +993,7 @@ int ivtv_s_input(struct file *file, void *fh, unsigned int inp)
v4l2_std_id std; v4l2_std_id std;
int i; int i;
if (inp < 0 || inp >= itv->nof_inputs) if (inp >= itv->nof_inputs)
return -EINVAL; return -EINVAL;
if (inp == itv->active_input) { if (inp == itv->active_input) {
@ -1168,7 +1168,7 @@ void ivtv_s_std_dec(struct ivtv *itv, v4l2_std_id *std)
} }
} }
int ivtv_s_std(struct file *file, void *fh, v4l2_std_id *std) static int ivtv_s_std(struct file *file, void *fh, v4l2_std_id *std)
{ {
struct ivtv *itv = fh2id(fh)->itv; struct ivtv *itv = fh2id(fh)->itv;

5
drivers/media/pci/mantis/mantis_input.c
View file

@ -18,6 +18,8 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/ */
#if 0 /* Currently unused */
#include <media/rc-core.h> #include <media/rc-core.h>
#include <linux/pci.h> #include <linux/pci.h>
@ -150,10 +152,11 @@ out:
return err; return err;
} }
int mantis_exit(struct mantis_pci *mantis) int mantis_init_exit(struct mantis_pci *mantis)
{ {
rc_unregister_device(mantis->rc); rc_unregister_device(mantis->rc);
rc_map_unregister(&ir_mantis_map); rc_map_unregister(&ir_mantis_map);
return 0; return 0;
} }
#endif

Some files were not shown because too many files have changed in this diff Show more