Linux 4.2-rc7

-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJV0R4AAAoJEHm+PkMAQRiG8xIH/AmiRd+JDrs0qqEy46p6X8Gn
 0lB5/KsGycvIGIBTiy2nZzcT0Ly6LeFUKUjzPytlOhIZPMrxMVMShDaQKCXXIMUr
 1mN6hkvpkLNnUhvL2fR6mm0zkjbz3zZEazFY+Jic8wQrtSkHgfH0DXqSAo8le0f8
 kNrd5BPPhIwvpHGaNGFdTpbgpPcalXyQk/fHyvDGidbyXzY/d7l05QfYJ6XCD4Zm
 IAy48iK5BFts2+z3aOYrOeuuCcm1qFX8YArqzE1rfPp+U/LQpfUfij4cmOqDLn/F
 qnv9E7bRRVovvrgKe4I3Trta8kT53VLJvqpdw2Usqo8zvhs4VyrYpHC+gEE6YUY=
 =9Rd4
 -----END PGP SIGNATURE-----

Merge tag 'v4.2-rc7' into drm-next

Linux 4.2-rc7

Backmerge master for i915 fixes

.mailmap

@@ -17,6 +17,7 @@ Aleksey Gorelov <aleksey_gorelov@phoenix.com>
 Al Viro <viro@ftp.linux.org.uk>
 Al Viro <viro@zenIV.linux.org.uk>
 Andreas Herrmann <aherrman@de.ibm.com>
+Andrey Ryabinin <ryabinin.a.a@gmail.com> <a.ryabinin@samsung.com>
 Andrew Morton <akpm@linux-foundation.org>
 Andrew Vasquez <andrew.vasquez@qlogic.com>
 Andy Adamson <andros@citi.umich.edu>

Documentation/devicetree/bindings/arm/cpus.txt

@@ -199,6 +199,7 @@ nodes to be present and contain the properties described below.
 			    "qcom,kpss-acc-v1"
 			    "qcom,kpss-acc-v2"
 			    "rockchip,rk3066-smp"
+			    "ste,dbx500-smp"
 
 	- cpu-release-addr
 		Usage: required for systems that have an "enable-method"

Documentation/devicetree/bindings/dma/apm-xgene-dma.txt

@@ -35,7 +35,7 @@ Example:
 			device_type = "dma";
 			reg = <0x0 0x1f270000 0x0 0x10000>,
 			      <0x0 0x1f200000 0x0 0x10000>,
-			      <0x0 0x1b008000 0x0 0x2000>,
+			      <0x0 0x1b000000 0x0 0x400000>,
 			      <0x0 0x1054a000 0x0 0x100>;
 			interrupts = <0x0 0x82 0x4>,
 				     <0x0 0xb8 0x4>,

Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt

@@ -35,3 +35,6 @@ the PCIe specification.
 
                       NOTE: this only applies to the SMMU itself, not
                       masters connected upstream of the SMMU.
+
+- hisilicon,broken-prefetch-cmd
+                    : Avoid sending CMD_PREFETCH_* commands to the SMMU.

Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt

@@ -17,7 +17,6 @@ Required properties:
 	       "fsl,imx6sx-usdhc"
 
 Optional properties:
-- fsl,cd-controller : Indicate to use controller internal card detection
 - fsl,wp-controller : Indicate to use controller internal write protection
 - fsl,delay-line : Specify the number of delay cells for override mode.
   This is used to set the clock delay for DLL(Delay Line) on override mode
@@ -35,7 +34,6 @@ esdhc@70004000 {
 	compatible = "fsl,imx51-esdhc";
 	reg = <0x70004000 0x4000>;
 	interrupts = <1>;
-	fsl,cd-controller;
 	fsl,wp-controller;
 };
 

Documentation/devicetree/bindings/phy/ti-phy.txt

@@ -82,6 +82,9 @@ Optional properties:
  - id: If there are multiple instance of the same type, in order to
    differentiate between each instance "id" can be used (e.g., multi-lane PCIe
    PHY). If "id" is not provided, it is set to default value of '1'.
+ - syscon-pllreset: Handle to system control region that contains the
+   CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0
+   register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy.
 
 This is usually a subnode of ocp2scp to which it is connected.
 
@@ -100,3 +103,16 @@ usb3phy@4a084400 {
 			"sysclk",
 			"refclk";
 };
+
+sata_phy: phy@4A096000 {
+	compatible = "ti,phy-pipe3-sata";
+	reg = <0x4A096000 0x80>, /* phy_rx */
+	      <0x4A096400 0x64>, /* phy_tx */
+	      <0x4A096800 0x40>; /* pll_ctrl */
+	reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+	ctrl-module = <&omap_control_sata>;
+	clocks = <&sys_clkin1>, <&sata_ref_clk>;
+	clock-names = "sysclk", "refclk";
+	syscon-pllreset = <&scm_conf 0x3fc>;
+	#phy-cells = <0>;
+};

Documentation/devicetree/bindings/sound/mt8173-max98090.txt

@@ -3,11 +3,13 @@ MT8173 with MAX98090 CODEC
 Required properties:
 - compatible : "mediatek,mt8173-max98090"
 - mediatek,audio-codec: the phandle of the MAX98090 audio codec
+- mediatek,platform: the phandle of MT8173 ASoC platform
 
 Example:
 
 	sound {
 		compatible = "mediatek,mt8173-max98090";
 		mediatek,audio-codec = <&max98090>;
+		mediatek,platform = <&afe>;
 	};
 

Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt

@@ -3,11 +3,13 @@ MT8173 with RT5650 RT5676 CODECS
 Required properties:
 - compatible : "mediatek,mt8173-rt5650-rt5676"
 - mediatek,audio-codec: the phandles of rt5650 and rt5676 codecs
+- mediatek,platform: the phandle of MT8173 ASoC platform
 
 Example:
 
 	sound {
 		compatible = "mediatek,mt8173-rt5650-rt5676";
 		mediatek,audio-codec = <&rt5650 &rt5676>;
+		mediatek,platform = <&afe>;
 	};
 

Documentation/devicetree/bindings/spi/spi-ath79.txt

@@ -3,7 +3,7 @@ Binding for Qualcomm Atheros AR7xxx/AR9xxx SPI controller
 Required properties:
 - compatible: has to be "qca,<soc-type>-spi", "qca,ar7100-spi" as fallback.
 - reg: Base address and size of the controllers memory area
-- clocks: phandle to the AHB clock.
+- clocks: phandle of the AHB clock.
 - clock-names: has to be "ahb".
 - #address-cells: <1>, as required by generic SPI binding.
 - #size-cells: <0>, also as required by generic SPI binding.
@@ -12,9 +12,9 @@ Child nodes as per the generic SPI binding.
 
 Example:
 
-	spi@1F000000 {
+	spi@1f000000 {
 		compatible = "qca,ar9132-spi", "qca,ar7100-spi";
-		reg = <0x1F000000 0x10>;
+		reg = <0x1f000000 0x10>;
 
 		clocks = <&pll 2>;
 		clock-names = "ahb";

Documentation/hwmon/nct7904

@@ -35,11 +35,11 @@ temp1_input		Local temperature (1/1000 degree,
 temp[2-9]_input		CPU temperatures (1/1000 degree,
 			0.125 degree resolution)
 
-fan[1-4]_mode		R/W, 0/1 for manual or SmartFan mode
+pwm[1-4]_enable		R/W, 1/2 for manual or SmartFan mode
 			Setting SmartFan mode is supported only if it has been
 			previously configured by BIOS (or configuration EEPROM)
 
-fan[1-4]_pwm		R/O in SmartFan mode, R/W in manual control mode
+pwm[1-4]		R/O in SmartFan mode, R/W in manual control mode
 
 The driver checks sensor control registers and does not export the sensors
 that are not enabled. Anyway, a sensor that is enabled may actually be not

Documentation/input/alps.txt

@@ -119,8 +119,10 @@ ALPS Absolute Mode - Protocol Version 2
  byte 5:  0   z6   z5   z4   z3   z2   z1   z0
 
 Protocol Version 2 DualPoint devices send standard PS/2 mouse packets for
-the DualPoint Stick. For non interleaved dualpoint devices the pointingstick
+the DualPoint Stick. The M, R and L bits signal the combined status of both
-buttons get reported separately in the PSM, PSR and PSL bits.
+the pointingstick and touchpad buttons, except for Dell dualpoint devices
+where the pointingstick buttons get reported separately in the PSM, PSR
+and PSL bits.
 
 Dualpoint device -- interleaved packet format
 ---------------------------------------------

Documentation/target/tcm_mod_builder.py

@@ -199,7 +199,8 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 	buf += "#include <linux/string.h>\n"
 	buf += "#include <linux/configfs.h>\n"
 	buf += "#include <linux/ctype.h>\n"
-	buf += "#include <asm/unaligned.h>\n\n"
+	buf += "#include <asm/unaligned.h>\n"
+	buf += "#include <scsi/scsi_proto.h>\n\n"
 	buf += "#include <target/target_core_base.h>\n"
 	buf += "#include <target/target_core_fabric.h>\n"
 	buf += "#include <target/target_core_fabric_configfs.h>\n"
@@ -230,8 +231,14 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 	buf += "	}\n"
 	buf += "	tpg->" + fabric_mod_port + " = " + fabric_mod_port + ";\n"
 	buf += "	tpg->" + fabric_mod_port + "_tpgt = tpgt;\n\n"
-	buf += "	ret = core_tpg_register(&" + fabric_mod_name + "_ops, wwn,\n"
+
-	buf += "				&tpg->se_tpg, SCSI_PROTOCOL_SAS);\n"
+	if proto_ident == "FC":
+		buf += "	ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_FCP);\n"
+	elif proto_ident == "SAS":
+		buf += "	ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_SAS);\n"
+	elif proto_ident == "iSCSI":
+		buf += "	ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_ISCSI);\n"
+
 	buf += "	if (ret < 0) {\n"
 	buf += "		kfree(tpg);\n"
 	buf += "		return NULL;\n"
@@ -292,7 +299,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 
 	buf += "static const struct target_core_fabric_ops " + fabric_mod_name + "_ops = {\n"
 	buf += "	.module				= THIS_MODULE,\n"
-	buf += "	.name				= " + fabric_mod_name + ",\n"
+	buf += "	.name				= \"" + fabric_mod_name + "\",\n"
 	buf += "	.get_fabric_name		= " + fabric_mod_name + "_get_fabric_name,\n"
 	buf += "	.tpg_get_wwn			= " + fabric_mod_name + "_get_fabric_wwn,\n"
 	buf += "	.tpg_get_tag			= " + fabric_mod_name + "_get_tag,\n"
@@ -322,17 +329,17 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 	buf += "	.fabric_make_tpg		= " + fabric_mod_name + "_make_tpg,\n"
 	buf += "	.fabric_drop_tpg		= " + fabric_mod_name + "_drop_tpg,\n"
 	buf += "\n"
-	buf += "	.tfc_wwn_attrs			= " + fabric_mod_name + "_wwn_attrs;\n"
+	buf += "	.tfc_wwn_attrs			= " + fabric_mod_name + "_wwn_attrs,\n"
 	buf += "};\n\n"
 
 	buf += "static int __init " + fabric_mod_name + "_init(void)\n"
 	buf += "{\n"
-	buf += "	return target_register_template(" + fabric_mod_name + "_ops);\n"
+	buf += "	return target_register_template(&" + fabric_mod_name + "_ops);\n"
 	buf += "};\n\n"
 
 	buf += "static void __exit " + fabric_mod_name + "_exit(void)\n"
 	buf += "{\n"
-	buf += "	target_unregister_template(" + fabric_mod_name + "_ops);\n"
+	buf += "	target_unregister_template(&" + fabric_mod_name + "_ops);\n"
 	buf += "};\n\n"
 
 	buf += "MODULE_DESCRIPTION(\"" + fabric_mod_name.upper() + " series fabric driver\");\n"

MAINTAINERS

@@ -3592,6 +3592,15 @@ S:	Maintained
 F:	drivers/gpu/drm/rockchip/
 F:	Documentation/devicetree/bindings/video/rockchip*
 
+DRM DRIVERS FOR STI
+M:	Benjamin Gaignard <benjamin.gaignard@linaro.org>
+M:	Vincent Abriou <vincent.abriou@st.com>
+L:	dri-devel@lists.freedesktop.org
+T:	git http://git.linaro.org/people/benjamin.gaignard/kernel.git
+S:	Maintained
+F:	drivers/gpu/drm/sti
+F:	Documentation/devicetree/bindings/gpu/st,stih4xx.txt
+
 DSBR100 USB FM RADIO DRIVER
 M:	Alexey Klimov <klimov.linux@gmail.com>
 L:	linux-media@vger.kernel.org
@@ -5605,6 +5614,7 @@ F:	kernel/irq/
 IRQCHIP DRIVERS
 M:	Thomas Gleixner <tglx@linutronix.de>
 M:	Jason Cooper <jason@lakedaemon.net>
+M:	Marc Zyngier <marc.zyngier@arm.com>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
@@ -5613,11 +5623,14 @@ F:	Documentation/devicetree/bindings/interrupt-controller/
 F:	drivers/irqchip/
 
 IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
-M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
+M:	Jiang Liu <jiang.liu@linux.intel.com>
+M:	Marc Zyngier <marc.zyngier@arm.com>
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
 F:	Documentation/IRQ-domain.txt
 F:	include/linux/irqdomain.h
 F:	kernel/irq/irqdomain.c
+F:	kernel/irq/msi.c
 
 ISAPNP
 M:	Jaroslav Kysela <perex@perex.cz>
@@ -5904,7 +5917,6 @@ S:	Supported
 F:	Documentation/s390/kvm.txt
 F:	arch/s390/include/asm/kvm*
 F:	arch/s390/kvm/
-F:	drivers/s390/kvm/
 
 KERNEL VIRTUAL MACHINE (KVM) FOR ARM
 M:	Christoffer Dall <christoffer.dall@linaro.org>
@@ -6844,6 +6856,12 @@ T:	git git://linuxtv.org/anttip/media_tree.git
 S:	Maintained
 F:	drivers/media/usb/msi2500/
 
+MSYSTEMS DISKONCHIP G3 MTD DRIVER
+M:	Robert Jarzmik <robert.jarzmik@free.fr>
+L:	linux-mtd@lists.infradead.org
+S:	Maintained
+F:	drivers/mtd/devices/docg3*
+
 MT9M032 APTINA SENSOR DRIVER
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
@@ -10901,6 +10919,15 @@ F:	drivers/block/virtio_blk.c
 F:	include/linux/virtio_*.h
 F:	include/uapi/linux/virtio_*.h
 
+VIRTIO DRIVERS FOR S390
+M:	Christian Borntraeger <borntraeger@de.ibm.com>
+M:	Cornelia Huck <cornelia.huck@de.ibm.com>
+L:	linux-s390@vger.kernel.org
+L:	virtualization@lists.linux-foundation.org
+L:	kvm@vger.kernel.org
+S:	Supported
+F:	drivers/s390/virtio/
+
 VIRTIO GPU DRIVER
 M:	David Airlie <airlied@linux.ie>
 M:	Gerd Hoffmann <kraxel@redhat.com>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 2
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc7
 NAME = Hurr durr I'ma sheep
 
 # *DOCUMENTATION*
@@ -597,6 +597,11 @@ endif # $(dot-config)
 # Defaults to vmlinux, but the arch makefile usually adds further targets
 all: vmlinux
 
+# The arch Makefile can set ARCH_{CPP,A,C}FLAGS to override the default
+# values of the respective KBUILD_* variables
+ARCH_CPPFLAGS :=
+ARCH_AFLAGS :=
+ARCH_CFLAGS :=
 include arch/$(SRCARCH)/Makefile
 
 KBUILD_CFLAGS	+= $(call cc-option,-fno-delete-null-pointer-checks,)
@@ -848,10 +853,10 @@ export mod_strip_cmd
 mod_compress_cmd = true
 ifdef CONFIG_MODULE_COMPRESS
   ifdef CONFIG_MODULE_COMPRESS_GZIP
-    mod_compress_cmd = gzip -n
+    mod_compress_cmd = gzip -n -f
   endif # CONFIG_MODULE_COMPRESS_GZIP
   ifdef CONFIG_MODULE_COMPRESS_XZ
-    mod_compress_cmd = xz
+    mod_compress_cmd = xz -f
   endif # CONFIG_MODULE_COMPRESS_XZ
 endif # CONFIG_MODULE_COMPRESS
 export mod_compress_cmd

arch/arc/Kconfig

@@ -313,11 +313,11 @@ config ARC_PAGE_SIZE_8K
 
 config ARC_PAGE_SIZE_16K
 	bool "16KB"
-	depends on ARC_MMU_V3
+	depends on ARC_MMU_V3 || ARC_MMU_V4
 
 config ARC_PAGE_SIZE_4K
 	bool "4KB"
-	depends on ARC_MMU_V3
+	depends on ARC_MMU_V3 || ARC_MMU_V4
 
 endchoice
 
@@ -365,6 +365,11 @@ config ARC_HAS_LLSC
 	default y
 	depends on !ARC_CANT_LLSC
 
+config ARC_STAR_9000923308
+	bool "Workaround for llock/scond livelock"
+	default y
+	depends on ISA_ARCV2 && SMP && ARC_HAS_LLSC
+
 config ARC_HAS_SWAPE
 	bool "Insn: SWAPE (endian-swap)"
 	default y
@@ -379,6 +384,10 @@ config ARC_HAS_LL64
 	  dest operands with 2 possible source operands.
 	default y
 
+config ARC_HAS_DIV_REM
+	bool "Insn: div, divu, rem, remu"
+	default y
+
 config ARC_HAS_RTC
 	bool "Local 64-bit r/o cycle counter"
 	default n

arch/arc/Makefile

@@ -36,8 +36,16 @@ cflags-$(atleast_gcc44)			+= -fsection-anchors
 cflags-$(CONFIG_ARC_HAS_LLSC)		+= -mlock
 cflags-$(CONFIG_ARC_HAS_SWAPE)		+= -mswape
 
+ifdef CONFIG_ISA_ARCV2
+
 ifndef CONFIG_ARC_HAS_LL64
-cflags-$(CONFIG_ISA_ARCV2)		+= -mno-ll64
+cflags-y				+= -mno-ll64
+endif
+
+ifndef CONFIG_ARC_HAS_DIV_REM
+cflags-y				+= -mno-div-rem
+endif
+
 endif
 
 cflags-$(CONFIG_ARC_DW2_UNWIND)		+= -fasynchronous-unwind-tables

arch/arc/include/asm/arcregs.h

@@ -89,11 +89,10 @@
 #define ECR_C_BIT_DTLB_LD_MISS		8
 #define ECR_C_BIT_DTLB_ST_MISS		9
 
-
 /* Auxiliary registers */
 #define AUX_IDENTITY		4
 #define AUX_INTR_VEC_BASE	0x25
-
+#define AUX_NON_VOL		0x5e
 
 /*
  * Floating Pt Registers
@@ -240,9 +239,9 @@ struct bcr_extn_xymem {
 
 struct bcr_perip {
 #ifdef CONFIG_CPU_BIG_ENDIAN
-	unsigned int start:8, pad2:8, sz:8, pad:8;
+	unsigned int start:8, pad2:8, sz:8, ver:8;
 #else
-	unsigned int pad:8, sz:8, pad2:8, start:8;
+	unsigned int ver:8, sz:8, pad2:8, start:8;
 #endif
 };
 

arch/arc/include/asm/atomic.h

@@ -23,33 +23,60 @@
 
 #define atomic_set(v, i) (((v)->counter) = (i))
 
-#ifdef CONFIG_ISA_ARCV2
+#ifdef CONFIG_ARC_STAR_9000923308
-#define PREFETCHW	"	prefetchw   [%1]	\n"
+
-#else
+#define SCOND_FAIL_RETRY_VAR_DEF						\
-#define PREFETCHW
+	unsigned int delay = 1, tmp;						\
+
+#define SCOND_FAIL_RETRY_ASM							\
+	"	bz	4f			\n"				\
+	"   ; --- scond fail delay ---		\n"				\
+	"	mov	%[tmp], %[delay]	\n"	/* tmp = delay */	\
+	"2: 	brne.d	%[tmp], 0, 2b		\n"	/* while (tmp != 0) */	\
+	"	sub	%[tmp], %[tmp], 1	\n"	/* tmp-- */		\
+	"	rol	%[delay], %[delay]	\n"	/* delay *= 2 */	\
+	"	b	1b			\n"	/* start over */	\
+	"4: ; --- success ---			\n"				\
+
+#define SCOND_FAIL_RETRY_VARS							\
+	  ,[delay] "+&r" (delay),[tmp] "=&r"	(tmp)				\
+
+#else	/* !CONFIG_ARC_STAR_9000923308 */
+
+#define SCOND_FAIL_RETRY_VAR_DEF
+
+#define SCOND_FAIL_RETRY_ASM							\
+	"	bnz     1b			\n"				\
+
+#define SCOND_FAIL_RETRY_VARS
+
 #endif
 
 #define ATOMIC_OP(op, c_op, asm_op)					\
 static inline void atomic_##op(int i, atomic_t *v)			\
 {									\
-	unsigned int temp;						\
+	unsigned int val;				                \
+	SCOND_FAIL_RETRY_VAR_DEF                                        \
 									\
 	__asm__ __volatile__(						\
-	"1:				\n"				\
+	"1:	llock   %[val], [%[ctr]]		\n"		\
-	PREFETCHW							\
+	"	" #asm_op " %[val], %[val], %[i]	\n"		\
-	"	llock   %0, [%1]	\n"				\
+	"	scond   %[val], [%[ctr]]		\n"		\
-	"	" #asm_op " %0, %0, %2	\n"				\
+	"						\n"		\
-	"	scond   %0, [%1]	\n"				\
+	SCOND_FAIL_RETRY_ASM						\
-	"	bnz     1b		\n"				\
+									\
-	: "=&r"(temp)	/* Early clobber, to prevent reg reuse */	\
+	: [val]	"=&r"	(val) /* Early clobber to prevent reg reuse */	\
-	: "r"(&v->counter), "ir"(i)					\
+	  SCOND_FAIL_RETRY_VARS						\
+	: [ctr]	"r"	(&v->counter), /* Not "m": llock only supports reg direct addr mode */	\
+	  [i]	"ir"	(i)						\
 	: "cc");							\
 }									\
 
 #define ATOMIC_OP_RETURN(op, c_op, asm_op)				\
 static inline int atomic_##op##_return(int i, atomic_t *v)		\
 {									\
-	unsigned int temp;						\
+	unsigned int val;				                \
+	SCOND_FAIL_RETRY_VAR_DEF                                        \
 									\
 	/*								\
 	 * Explicit full memory barrier needed before/after as		\
@@ -58,19 +85,21 @@ static inline int atomic_##op##_return(int i, atomic_t *v)		\
 	smp_mb();							\
 									\
 	__asm__ __volatile__(						\
-	"1:				\n"				\
+	"1:	llock   %[val], [%[ctr]]		\n"		\
-	PREFETCHW							\
+	"	" #asm_op " %[val], %[val], %[i]	\n"		\
-	"	llock   %0, [%1]	\n"				\
+	"	scond   %[val], [%[ctr]]		\n"		\
-	"	" #asm_op " %0, %0, %2	\n"				\
+	"						\n"		\
-	"	scond   %0, [%1]	\n"				\
+	SCOND_FAIL_RETRY_ASM						\
-	"	bnz     1b		\n"				\
+									\
-	: "=&r"(temp)							\
+	: [val]	"=&r"	(val)						\
-	: "r"(&v->counter), "ir"(i)					\
+	  SCOND_FAIL_RETRY_VARS						\
+	: [ctr]	"r"	(&v->counter),					\
+	  [i]	"ir"	(i)						\
 	: "cc");							\
 									\
 	smp_mb();							\
 									\
-	return temp;							\
+	return val;							\
 }
 
 #else	/* !CONFIG_ARC_HAS_LLSC */
@@ -150,6 +179,9 @@ ATOMIC_OP(and, &=, and)
 #undef ATOMIC_OPS
 #undef ATOMIC_OP_RETURN
 #undef ATOMIC_OP
+#undef SCOND_FAIL_RETRY_VAR_DEF
+#undef SCOND_FAIL_RETRY_ASM
+#undef SCOND_FAIL_RETRY_VARS
 
 /**
  * __atomic_add_unless - add unless the number is a given value

arch/arc/include/asm/ptrace.h

@@ -20,20 +20,20 @@
 struct pt_regs {
 
 	/* Real registers */
-	long bta;	/* bta_l1, bta_l2, erbta */
+	unsigned long bta;	/* bta_l1, bta_l2, erbta */
 
-	long lp_start, lp_end, lp_count;
+	unsigned long lp_start, lp_end, lp_count;
 
-	long status32;	/* status32_l1, status32_l2, erstatus */
+	unsigned long status32;	/* status32_l1, status32_l2, erstatus */
-	long ret;	/* ilink1, ilink2 or eret */
+	unsigned long ret;	/* ilink1, ilink2 or eret */
-	long blink;
+	unsigned long blink;
-	long fp;
+	unsigned long fp;
-	long r26;	/* gp */
+	unsigned long r26;	/* gp */
 
-	long r12, r11, r10, r9, r8, r7, r6, r5, r4, r3, r2, r1, r0;
+	unsigned long r12, r11, r10, r9, r8, r7, r6, r5, r4, r3, r2, r1, r0;
 
-	long sp;	/* user/kernel sp depending on where we came from  */
+	unsigned long sp;	/* User/Kernel depending on where we came from */
-	long orig_r0;
+	unsigned long orig_r0;
 
 	/*
 	 * To distinguish bet excp, syscall, irq
@@ -55,13 +55,13 @@ struct pt_regs {
 		unsigned long event;
 	};
 
-	long user_r25;
+	unsigned long user_r25;
 };
 #else
 
 struct pt_regs {
 
-	long orig_r0;
+	unsigned long orig_r0;
 
 	union {
 		struct {
@@ -76,26 +76,26 @@ struct pt_regs {
 		unsigned long event;
 	};
 
-	long bta;	/* bta_l1, bta_l2, erbta */
+	unsigned long bta;	/* bta_l1, bta_l2, erbta */
 
-	long user_r25;
+	unsigned long user_r25;
 
-	long r26;	/* gp */
+	unsigned long r26;	/* gp */
-	long fp;
+	unsigned long fp;
-	long sp;	/* user/kernel sp depending on where we came from  */
+	unsigned long sp;	/* user/kernel sp depending on where we came from  */
 
-	long r12;
+	unsigned long r12;
 
 	/*------- Below list auto saved by h/w -----------*/
-	long r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11;
+	unsigned long r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11;
 
-	long blink;
+	unsigned long blink;
-	long lp_end, lp_start, lp_count;
+	unsigned long lp_end, lp_start, lp_count;
 
-	long ei, ldi, jli;
+	unsigned long ei, ldi, jli;
 
-	long ret;
+	unsigned long ret;
-	long status32;
+	unsigned long status32;
 };
 
 #endif
@@ -103,10 +103,10 @@ struct pt_regs {
 /* Callee saved registers - need to be saved only when you are scheduled out */
 
 struct callee_regs {
-	long r25, r24, r23, r22, r21, r20, r19, r18, r17, r16, r15, r14, r13;
+	unsigned long r25, r24, r23, r22, r21, r20, r19, r18, r17, r16, r15, r14, r13;
 };
 
-#define instruction_pointer(regs)	(unsigned long)((regs)->ret)
+#define instruction_pointer(regs)	((regs)->ret)
 #define profile_pc(regs)		instruction_pointer(regs)
 
 /* return 1 if user mode or 0 if kernel mode */
@@ -142,7 +142,7 @@ struct callee_regs {
 
 static inline long regs_return_value(struct pt_regs *regs)
 {
-	return regs->r0;
+	return (long)regs->r0;
 }
 
 #endif /* !__ASSEMBLY__ */

arch/arc/include/asm/spinlock.h

@@ -18,9 +18,518 @@
 #define arch_spin_unlock_wait(x) \
 	do { while (arch_spin_is_locked(x)) cpu_relax(); } while (0)
 
+#ifdef CONFIG_ARC_HAS_LLSC
+
+/*
+ * A normal LLOCK/SCOND based system, w/o need for livelock workaround
+ */
+#ifndef CONFIG_ARC_STAR_9000923308
+
 static inline void arch_spin_lock(arch_spinlock_t *lock)
 {
-	unsigned int tmp = __ARCH_SPIN_LOCK_LOCKED__;
+	unsigned int val;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	llock	%[val], [%[slock]]	\n"
+	"	breq	%[val], %[LOCKED], 1b	\n"	/* spin while LOCKED */
+	"	scond	%[LOCKED], [%[slock]]	\n"	/* acquire */
+	"	bnz	1b			\n"
+	"					\n"
+	: [val]		"=&r"	(val)
+	: [slock]	"r"	(&(lock->slock)),
+	  [LOCKED]	"r"	(__ARCH_SPIN_LOCK_LOCKED__)
+	: "memory", "cc");
+
+	smp_mb();
+}
+
+/* 1 - lock taken successfully */
+static inline int arch_spin_trylock(arch_spinlock_t *lock)
+{
+	unsigned int val, got_it = 0;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	llock	%[val], [%[slock]]	\n"
+	"	breq	%[val], %[LOCKED], 4f	\n"	/* already LOCKED, just bail */
+	"	scond	%[LOCKED], [%[slock]]	\n"	/* acquire */
+	"	bnz	1b			\n"
+	"	mov	%[got_it], 1		\n"
+	"4:					\n"
+	"					\n"
+	: [val]		"=&r"	(val),
+	  [got_it]	"+&r"	(got_it)
+	: [slock]	"r"	(&(lock->slock)),
+	  [LOCKED]	"r"	(__ARCH_SPIN_LOCK_LOCKED__)
+	: "memory", "cc");
+
+	smp_mb();
+
+	return got_it;
+}
+
+static inline void arch_spin_unlock(arch_spinlock_t *lock)
+{
+	smp_mb();
+
+	lock->slock = __ARCH_SPIN_LOCK_UNLOCKED__;
+
+	smp_mb();
+}
+
+/*
+ * Read-write spinlocks, allowing multiple readers but only one writer.
+ * Unfair locking as Writers could be starved indefinitely by Reader(s)
+ */
+
+static inline void arch_read_lock(arch_rwlock_t *rw)
+{
+	unsigned int val;
+
+	smp_mb();
+
+	/*
+	 * zero means writer holds the lock exclusively, deny Reader.
+	 * Otherwise grant lock to first/subseq reader
+	 *
+	 * 	if (rw->counter > 0) {
+	 *		rw->counter--;
+	 *		ret = 1;
+	 *	}
+	 */
+
+	__asm__ __volatile__(
+	"1:	llock	%[val], [%[rwlock]]	\n"
+	"	brls	%[val], %[WR_LOCKED], 1b\n"	/* <= 0: spin while write locked */
+	"	sub	%[val], %[val], 1	\n"	/* reader lock */
+	"	scond	%[val], [%[rwlock]]	\n"
+	"	bnz	1b			\n"
+	"					\n"
+	: [val]		"=&r"	(val)
+	: [rwlock]	"r"	(&(rw->counter)),
+	  [WR_LOCKED]	"ir"	(0)
+	: "memory", "cc");
+
+	smp_mb();
+}
+
+/* 1 - lock taken successfully */
+static inline int arch_read_trylock(arch_rwlock_t *rw)
+{
+	unsigned int val, got_it = 0;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	llock	%[val], [%[rwlock]]	\n"
+	"	brls	%[val], %[WR_LOCKED], 4f\n"	/* <= 0: already write locked, bail */
+	"	sub	%[val], %[val], 1	\n"	/* counter-- */
+	"	scond	%[val], [%[rwlock]]	\n"
+	"	bnz	1b			\n"	/* retry if collided with someone */
+	"	mov	%[got_it], 1		\n"
+	"					\n"
+	"4: ; --- done ---			\n"
+
+	: [val]		"=&r"	(val),
+	  [got_it]	"+&r"	(got_it)
+	: [rwlock]	"r"	(&(rw->counter)),
+	  [WR_LOCKED]	"ir"	(0)
+	: "memory", "cc");
+
+	smp_mb();
+
+	return got_it;
+}
+
+static inline void arch_write_lock(arch_rwlock_t *rw)
+{
+	unsigned int val;
+
+	smp_mb();
+
+	/*
+	 * If reader(s) hold lock (lock < __ARCH_RW_LOCK_UNLOCKED__),
+	 * deny writer. Otherwise if unlocked grant to writer
+	 * Hence the claim that Linux rwlocks are unfair to writers.
+	 * (can be starved for an indefinite time by readers).
+	 *
+	 *	if (rw->counter == __ARCH_RW_LOCK_UNLOCKED__) {
+	 *		rw->counter = 0;
+	 *		ret = 1;
+	 *	}
+	 */
+
+	__asm__ __volatile__(
+	"1:	llock	%[val], [%[rwlock]]	\n"
+	"	brne	%[val], %[UNLOCKED], 1b	\n"	/* while !UNLOCKED spin */
+	"	mov	%[val], %[WR_LOCKED]	\n"
+	"	scond	%[val], [%[rwlock]]	\n"
+	"	bnz	1b			\n"
+	"					\n"
+	: [val]		"=&r"	(val)
+	: [rwlock]	"r"	(&(rw->counter)),
+	  [UNLOCKED]	"ir"	(__ARCH_RW_LOCK_UNLOCKED__),
+	  [WR_LOCKED]	"ir"	(0)
+	: "memory", "cc");
+
+	smp_mb();
+}
+
+/* 1 - lock taken successfully */
+static inline int arch_write_trylock(arch_rwlock_t *rw)
+{
+	unsigned int val, got_it = 0;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	llock	%[val], [%[rwlock]]	\n"
+	"	brne	%[val], %[UNLOCKED], 4f	\n"	/* !UNLOCKED, bail */
+	"	mov	%[val], %[WR_LOCKED]	\n"
+	"	scond	%[val], [%[rwlock]]	\n"
+	"	bnz	1b			\n"	/* retry if collided with someone */
+	"	mov	%[got_it], 1		\n"
+	"					\n"
+	"4: ; --- done ---			\n"
+
+	: [val]		"=&r"	(val),
+	  [got_it]	"+&r"	(got_it)
+	: [rwlock]	"r"	(&(rw->counter)),
+	  [UNLOCKED]	"ir"	(__ARCH_RW_LOCK_UNLOCKED__),
+	  [WR_LOCKED]	"ir"	(0)
+	: "memory", "cc");
+
+	smp_mb();
+
+	return got_it;
+}
+
+static inline void arch_read_unlock(arch_rwlock_t *rw)
+{
+	unsigned int val;
+
+	smp_mb();
+
+	/*
+	 * rw->counter++;
+	 */
+	__asm__ __volatile__(
+	"1:	llock	%[val], [%[rwlock]]	\n"
+	"	add	%[val], %[val], 1	\n"
+	"	scond	%[val], [%[rwlock]]	\n"
+	"	bnz	1b			\n"
+	"					\n"
+	: [val]		"=&r"	(val)
+	: [rwlock]	"r"	(&(rw->counter))
+	: "memory", "cc");
+
+	smp_mb();
+}
+
+static inline void arch_write_unlock(arch_rwlock_t *rw)
+{
+	smp_mb();
+
+	rw->counter = __ARCH_RW_LOCK_UNLOCKED__;
+
+	smp_mb();
+}
+
+#else	/* CONFIG_ARC_STAR_9000923308 */
+
+/*
+ * HS38x4 could get into a LLOCK/SCOND livelock in case of multiple overlapping
+ * coherency transactions in the SCU. The exclusive line state keeps rotating
+ * among contenting cores leading to a never ending cycle. So break the cycle
+ * by deferring the retry of failed exclusive access (SCOND). The actual delay
+ * needed is function of number of contending cores as well as the unrelated
+ * coherency traffic from other cores. To keep the code simple, start off with
+ * small delay of 1 which would suffice most cases and in case of contention
+ * double the delay. Eventually the delay is sufficient such that the coherency
+ * pipeline is drained, thus a subsequent exclusive access would succeed.
+ */
+
+#define SCOND_FAIL_RETRY_VAR_DEF						\
+	unsigned int delay, tmp;						\
+
+#define SCOND_FAIL_RETRY_ASM							\
+	"   ; --- scond fail delay ---		\n"				\
+	"	mov	%[tmp], %[delay]	\n"	/* tmp = delay */	\
+	"2: 	brne.d	%[tmp], 0, 2b		\n"	/* while (tmp != 0) */	\
+	"	sub	%[tmp], %[tmp], 1	\n"	/* tmp-- */		\
+	"	rol	%[delay], %[delay]	\n"	/* delay *= 2 */	\
+	"	b	1b			\n"	/* start over */	\
+	"					\n"				\
+	"4: ; --- done ---			\n"				\
+
+#define SCOND_FAIL_RETRY_VARS							\
+	  ,[delay] "=&r" (delay), [tmp] "=&r"	(tmp)				\
+
+static inline void arch_spin_lock(arch_spinlock_t *lock)
+{
+	unsigned int val;
+	SCOND_FAIL_RETRY_VAR_DEF;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"0:	mov	%[delay], 1		\n"
+	"1:	llock	%[val], [%[slock]]	\n"
+	"	breq	%[val], %[LOCKED], 0b	\n"	/* spin while LOCKED */
+	"	scond	%[LOCKED], [%[slock]]	\n"	/* acquire */
+	"	bz	4f			\n"	/* done */
+	"					\n"
+	SCOND_FAIL_RETRY_ASM
+
+	: [val]		"=&r"	(val)
+	  SCOND_FAIL_RETRY_VARS
+	: [slock]	"r"	(&(lock->slock)),
+	  [LOCKED]	"r"	(__ARCH_SPIN_LOCK_LOCKED__)
+	: "memory", "cc");
+
+	smp_mb();
+}
+
+/* 1 - lock taken successfully */
+static inline int arch_spin_trylock(arch_spinlock_t *lock)
+{
+	unsigned int val, got_it = 0;
+	SCOND_FAIL_RETRY_VAR_DEF;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"0:	mov	%[delay], 1		\n"
+	"1:	llock	%[val], [%[slock]]	\n"
+	"	breq	%[val], %[LOCKED], 4f	\n"	/* already LOCKED, just bail */
+	"	scond	%[LOCKED], [%[slock]]	\n"	/* acquire */
+	"	bz.d	4f			\n"
+	"	mov.z	%[got_it], 1		\n"	/* got it */
+	"					\n"
+	SCOND_FAIL_RETRY_ASM
+
+	: [val]		"=&r"	(val),
+	  [got_it]	"+&r"	(got_it)
+	  SCOND_FAIL_RETRY_VARS
+	: [slock]	"r"	(&(lock->slock)),
+	  [LOCKED]	"r"	(__ARCH_SPIN_LOCK_LOCKED__)
+	: "memory", "cc");
+
+	smp_mb();
+
+	return got_it;
+}
+
+static inline void arch_spin_unlock(arch_spinlock_t *lock)
+{
+	smp_mb();
+
+	lock->slock = __ARCH_SPIN_LOCK_UNLOCKED__;
+
+	smp_mb();
+}
+
+/*
+ * Read-write spinlocks, allowing multiple readers but only one writer.
+ * Unfair locking as Writers could be starved indefinitely by Reader(s)
+ */
+
+static inline void arch_read_lock(arch_rwlock_t *rw)
+{
+	unsigned int val;
+	SCOND_FAIL_RETRY_VAR_DEF;
+
+	smp_mb();
+
+	/*
+	 * zero means writer holds the lock exclusively, deny Reader.
+	 * Otherwise grant lock to first/subseq reader
+	 *
+	 * 	if (rw->counter > 0) {
+	 *		rw->counter--;
+	 *		ret = 1;
+	 *	}
+	 */
+
+	__asm__ __volatile__(
+	"0:	mov	%[delay], 1		\n"
+	"1:	llock	%[val], [%[rwlock]]	\n"
+	"	brls	%[val], %[WR_LOCKED], 0b\n"	/* <= 0: spin while write locked */
+	"	sub	%[val], %[val], 1	\n"	/* reader lock */
+	"	scond	%[val], [%[rwlock]]	\n"
+	"	bz	4f			\n"	/* done */
+	"					\n"
+	SCOND_FAIL_RETRY_ASM
+
+	: [val]		"=&r"	(val)
+	  SCOND_FAIL_RETRY_VARS
+	: [rwlock]	"r"	(&(rw->counter)),
+	  [WR_LOCKED]	"ir"	(0)
+	: "memory", "cc");
+
+	smp_mb();
+}
+
+/* 1 - lock taken successfully */
+static inline int arch_read_trylock(arch_rwlock_t *rw)
+{
+	unsigned int val, got_it = 0;
+	SCOND_FAIL_RETRY_VAR_DEF;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"0:	mov	%[delay], 1		\n"
+	"1:	llock	%[val], [%[rwlock]]	\n"
+	"	brls	%[val], %[WR_LOCKED], 4f\n"	/* <= 0: already write locked, bail */
+	"	sub	%[val], %[val], 1	\n"	/* counter-- */
+	"	scond	%[val], [%[rwlock]]	\n"
+	"	bz.d	4f			\n"
+	"	mov.z	%[got_it], 1		\n"	/* got it */
+	"					\n"
+	SCOND_FAIL_RETRY_ASM
+
+	: [val]		"=&r"	(val),
+	  [got_it]	"+&r"	(got_it)
+	  SCOND_FAIL_RETRY_VARS
+	: [rwlock]	"r"	(&(rw->counter)),
+	  [WR_LOCKED]	"ir"	(0)
+	: "memory", "cc");
+
+	smp_mb();
+
+	return got_it;
+}
+
+static inline void arch_write_lock(arch_rwlock_t *rw)
+{
+	unsigned int val;
+	SCOND_FAIL_RETRY_VAR_DEF;
+
+	smp_mb();
+
+	/*
+	 * If reader(s) hold lock (lock < __ARCH_RW_LOCK_UNLOCKED__),
+	 * deny writer. Otherwise if unlocked grant to writer
+	 * Hence the claim that Linux rwlocks are unfair to writers.
+	 * (can be starved for an indefinite time by readers).
+	 *
+	 *	if (rw->counter == __ARCH_RW_LOCK_UNLOCKED__) {
+	 *		rw->counter = 0;
+	 *		ret = 1;
+	 *	}
+	 */
+
+	__asm__ __volatile__(
+	"0:	mov	%[delay], 1		\n"
+	"1:	llock	%[val], [%[rwlock]]	\n"
+	"	brne	%[val], %[UNLOCKED], 0b	\n"	/* while !UNLOCKED spin */
+	"	mov	%[val], %[WR_LOCKED]	\n"
+	"	scond	%[val], [%[rwlock]]	\n"
+	"	bz	4f			\n"
+	"					\n"
+	SCOND_FAIL_RETRY_ASM
+
+	: [val]		"=&r"	(val)
+	  SCOND_FAIL_RETRY_VARS
+	: [rwlock]	"r"	(&(rw->counter)),
+	  [UNLOCKED]	"ir"	(__ARCH_RW_LOCK_UNLOCKED__),
+	  [WR_LOCKED]	"ir"	(0)
+	: "memory", "cc");
+
+	smp_mb();
+}
+
+/* 1 - lock taken successfully */
+static inline int arch_write_trylock(arch_rwlock_t *rw)
+{
+	unsigned int val, got_it = 0;
+	SCOND_FAIL_RETRY_VAR_DEF;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"0:	mov	%[delay], 1		\n"
+	"1:	llock	%[val], [%[rwlock]]	\n"
+	"	brne	%[val], %[UNLOCKED], 4f	\n"	/* !UNLOCKED, bail */
+	"	mov	%[val], %[WR_LOCKED]	\n"
+	"	scond	%[val], [%[rwlock]]	\n"
+	"	bz.d	4f			\n"
+	"	mov.z	%[got_it], 1		\n"	/* got it */
+	"					\n"
+	SCOND_FAIL_RETRY_ASM
+
+	: [val]		"=&r"	(val),
+	  [got_it]	"+&r"	(got_it)
+	  SCOND_FAIL_RETRY_VARS
+	: [rwlock]	"r"	(&(rw->counter)),
+	  [UNLOCKED]	"ir"	(__ARCH_RW_LOCK_UNLOCKED__),
+	  [WR_LOCKED]	"ir"	(0)
+	: "memory", "cc");
+
+	smp_mb();
+
+	return got_it;
+}
+
+static inline void arch_read_unlock(arch_rwlock_t *rw)
+{
+	unsigned int val;
+
+	smp_mb();
+
+	/*
+	 * rw->counter++;
+	 */
+	__asm__ __volatile__(
+	"1:	llock	%[val], [%[rwlock]]	\n"
+	"	add	%[val], %[val], 1	\n"
+	"	scond	%[val], [%[rwlock]]	\n"
+	"	bnz	1b			\n"
+	"					\n"
+	: [val]		"=&r"	(val)
+	: [rwlock]	"r"	(&(rw->counter))
+	: "memory", "cc");
+
+	smp_mb();
+}
+
+static inline void arch_write_unlock(arch_rwlock_t *rw)
+{
+	unsigned int val;
+
+	smp_mb();
+
+	/*
+	 * rw->counter = __ARCH_RW_LOCK_UNLOCKED__;
+	 */
+	__asm__ __volatile__(
+	"1:	llock	%[val], [%[rwlock]]	\n"
+	"	scond	%[UNLOCKED], [%[rwlock]]\n"
+	"	bnz	1b			\n"
+	"					\n"
+	: [val]		"=&r"	(val)
+	: [rwlock]	"r"	(&(rw->counter)),
+	  [UNLOCKED]	"r"	(__ARCH_RW_LOCK_UNLOCKED__)
+	: "memory", "cc");
+
+	smp_mb();
+}
+
+#undef SCOND_FAIL_RETRY_VAR_DEF
+#undef SCOND_FAIL_RETRY_ASM
+#undef SCOND_FAIL_RETRY_VARS
+
+#endif	/* CONFIG_ARC_STAR_9000923308 */
+
+#else	/* !CONFIG_ARC_HAS_LLSC */
+
+static inline void arch_spin_lock(arch_spinlock_t *lock)
+{
+	unsigned int val = __ARCH_SPIN_LOCK_LOCKED__;
 
 	/*
 	 * This smp_mb() is technically superfluous, we only need the one
@@ -33,7 +542,7 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
 	__asm__ __volatile__(
 	"1:	ex  %0, [%1]		\n"
 	"	breq  %0, %2, 1b	\n"
-	: "+&r" (tmp)
+	: "+&r" (val)
 	: "r"(&(lock->slock)), "ir"(__ARCH_SPIN_LOCK_LOCKED__)
 	: "memory");
 
@@ -48,26 +557,27 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
 	smp_mb();
 }
 
+/* 1 - lock taken successfully */
 static inline int arch_spin_trylock(arch_spinlock_t *lock)
 {
-	unsigned int tmp = __ARCH_SPIN_LOCK_LOCKED__;
+	unsigned int val = __ARCH_SPIN_LOCK_LOCKED__;
 
 	smp_mb();
 
 	__asm__ __volatile__(
 	"1:	ex  %0, [%1]		\n"
-	: "+r" (tmp)
+	: "+r" (val)
 	: "r"(&(lock->slock))
 	: "memory");
 
 	smp_mb();
 
-	return (tmp == __ARCH_SPIN_LOCK_UNLOCKED__);
+	return (val == __ARCH_SPIN_LOCK_UNLOCKED__);
 }
 
 static inline void arch_spin_unlock(arch_spinlock_t *lock)
 {
-	unsigned int tmp = __ARCH_SPIN_LOCK_UNLOCKED__;
+	unsigned int val = __ARCH_SPIN_LOCK_UNLOCKED__;
 
 	/*
 	 * RELEASE barrier: given the instructions avail on ARCv2, full barrier
@@ -77,7 +587,7 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
 
 	__asm__ __volatile__(
 	"	ex  %0, [%1]		\n"
-	: "+r" (tmp)
+	: "+r" (val)
 	: "r"(&(lock->slock))
 	: "memory");
 
@@ -90,19 +600,12 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
 
 /*
  * Read-write spinlocks, allowing multiple readers but only one writer.
+ * Unfair locking as Writers could be starved indefinitely by Reader(s)
  *
  * The spinlock itself is contained in @counter and access to it is
  * serialized with @lock_mutex.
- *
- * Unfair locking as Writers could be starved indefinitely by Reader(s)
  */
 
-/* Would read_trylock() succeed? */
-#define arch_read_can_lock(x)	((x)->counter > 0)
-
-/* Would write_trylock() succeed? */
-#define arch_write_can_lock(x)	((x)->counter == __ARCH_RW_LOCK_UNLOCKED__)
-
 /* 1 - lock taken successfully */
 static inline int arch_read_trylock(arch_rwlock_t *rw)
 {
@@ -173,6 +676,11 @@ static inline void arch_write_unlock(arch_rwlock_t *rw)
 	arch_spin_unlock(&(rw->lock_mutex));
 }
 
+#endif
+
+#define arch_read_can_lock(x)	((x)->counter > 0)
+#define arch_write_can_lock(x)	((x)->counter == __ARCH_RW_LOCK_UNLOCKED__)
+
 #define arch_read_lock_flags(lock, flags)	arch_read_lock(lock)
 #define arch_write_lock_flags(lock, flags)	arch_write_lock(lock)
 

arch/arc/include/asm/spinlock_types.h

@@ -26,7 +26,9 @@ typedef struct {
  */
 typedef struct {
 	volatile unsigned int	counter;
+#ifndef CONFIG_ARC_HAS_LLSC
 	arch_spinlock_t		lock_mutex;
+#endif
 } arch_rwlock_t;
 
 #define __ARCH_RW_LOCK_UNLOCKED__	0x01000000

arch/arc/include/uapi/asm/ptrace.h

@@ -32,20 +32,20 @@
 */
 struct user_regs_struct {
 
-	long pad;
+	unsigned long pad;
 	struct {
-		long bta, lp_start, lp_end, lp_count;
+		unsigned long bta, lp_start, lp_end, lp_count;
-		long status32, ret, blink, fp, gp;
+		unsigned long status32, ret, blink, fp, gp;
-		long r12, r11, r10, r9, r8, r7, r6, r5, r4, r3, r2, r1, r0;
+		unsigned long r12, r11, r10, r9, r8, r7, r6, r5, r4, r3, r2, r1, r0;
-		long sp;
+		unsigned long sp;
 	} scratch;
-	long pad2;
+	unsigned long pad2;
 	struct {
-		long r25, r24, r23, r22, r21, r20;
+		unsigned long r25, r24, r23, r22, r21, r20;
-		long r19, r18, r17, r16, r15, r14, r13;
+		unsigned long r19, r18, r17, r16, r15, r14, r13;
 	} callee;
-	long efa;	/* break pt addr, for break points in delay slots */
+	unsigned long efa;	/* break pt addr, for break points in delay slots */
-	long stop_pc;	/* give dbg stop_pc after ensuring brkpt trap */
+	unsigned long stop_pc;	/* give dbg stop_pc after ensuring brkpt trap */
 };
 #endif /* !__ASSEMBLY__ */
 

arch/arc/kernel/setup.c

@@ -47,6 +47,7 @@ static void read_arc_build_cfg_regs(void)
 	struct bcr_perip uncached_space;
 	struct bcr_generic bcr;
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
+	unsigned long perip_space;
 	FIX_PTR(cpu);
 
 	READ_BCR(AUX_IDENTITY, cpu->core);
@@ -56,7 +57,12 @@ static void read_arc_build_cfg_regs(void)
 	cpu->vec_base = read_aux_reg(AUX_INTR_VEC_BASE);
 
 	READ_BCR(ARC_REG_D_UNCACH_BCR, uncached_space);
-	BUG_ON((uncached_space.start << 24) != ARC_UNCACHED_ADDR_SPACE);
+        if (uncached_space.ver < 3)
+		perip_space = uncached_space.start << 24;
+	else
+		perip_space = read_aux_reg(AUX_NON_VOL) & 0xF0000000;
+
+	BUG_ON(perip_space != ARC_UNCACHED_ADDR_SPACE);
 
 	READ_BCR(ARC_REG_MUL_BCR, cpu->extn_mpy);
 
@@ -330,6 +336,10 @@ static void arc_chk_core_config(void)
 		pr_warn("CONFIG_ARC_FPU_SAVE_RESTORE needed for working apps\n");
 	else if (!cpu->extn.fpu_dp && fpu_enabled)
 		panic("FPU non-existent, disable CONFIG_ARC_FPU_SAVE_RESTORE\n");
+
+	if (is_isa_arcv2() && IS_ENABLED(CONFIG_SMP) && cpu->isa.atomic &&
+	    !IS_ENABLED(CONFIG_ARC_STAR_9000923308))
+		panic("llock/scond livelock workaround missing\n");
 }
 
 /*

arch/arc/kernel/time.c

@@ -203,34 +203,24 @@ static int arc_clkevent_set_next_event(unsigned long delta,
 	return 0;
 }
 
-static void arc_clkevent_set_mode(enum clock_event_mode mode,
+static int arc_clkevent_set_periodic(struct clock_event_device *dev)
-				  struct clock_event_device *dev)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
 	/*
 	 * At X Hz, 1 sec = 1000ms -> X cycles;
 	 *		      10ms -> X / 100 cycles
 	 */
 	arc_timer_event_setup(arc_get_core_freq() / HZ);
-		break;
+	return 0;
-	case CLOCK_EVT_MODE_ONESHOT:
-		break;
-	default:
-		break;
-	}
-
-	return;
 }
 
 static DEFINE_PER_CPU(struct clock_event_device, arc_clockevent_device) = {
 	.name			= "ARC Timer0",
-	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
+	.features		= CLOCK_EVT_FEAT_ONESHOT |
-	.mode		= CLOCK_EVT_MODE_UNUSED,
+				  CLOCK_EVT_FEAT_PERIODIC,
 	.rating			= 300,
 	.irq			= TIMER0_IRQ,	/* hardwired, no need for resources */
 	.set_next_event		= arc_clkevent_set_next_event,
-	.set_mode	= arc_clkevent_set_mode,
+	.set_state_periodic	= arc_clkevent_set_periodic,
 };
 
 static irqreturn_t timer_irq_handler(int irq, void *dev_id)
@@ -240,7 +230,7 @@ static irqreturn_t timer_irq_handler(int irq, void *dev_id)
 	 * irq_set_chip_and_handler() asked for handle_percpu_devid_irq()
 	 */
 	struct clock_event_device *evt = this_cpu_ptr(&arc_clockevent_device);
-	int irq_reenable = evt->mode == CLOCK_EVT_MODE_PERIODIC;
+	int irq_reenable = clockevent_state_periodic(evt);
 
 	/*
 	 * Any write to CTRL reg ACks the interrupt, we rewrite the

arch/arc/lib/memcpy-archs.S

@@ -206,7 +206,7 @@ unalignedOffby3:
 	ld.ab	r6, [r1, 4]
 	prefetch [r1, 28]	;Prefetch the next read location
 	ld.ab	r8, [r1,4]
-	prefetch [r3, 32]	;Prefetch the next write location
+	prefetchw [r3, 32]	;Prefetch the next write location
 
 	SHIFT_1	(r7, r6, 8)
 	or	r7, r7, r5

arch/arc/lib/memset-archs.S

@@ -10,12 +10,6 @@
 
 #undef PREALLOC_NOT_AVAIL
 
-#ifdef PREALLOC_NOT_AVAIL
-#define PREWRITE(A,B)	prefetchw [(A),(B)]
-#else
-#define PREWRITE(A,B)	prealloc [(A),(B)]
-#endif
-
 ENTRY(memset)
 	prefetchw [r0]		; Prefetch the write location
 	mov.f	0, r2
@@ -51,9 +45,15 @@ ENTRY(memset)
 
 ;;; Convert len to Dwords, unfold x8
 	lsr.f	lp_count, lp_count, 6
+
 	lpnz	@.Lset64bytes
 	;; LOOP START
-	PREWRITE(r3, 64)	;Prefetch the next write location
+#ifdef PREALLOC_NOT_AVAIL
+	prefetchw [r3, 64]	;Prefetch the next write location
+#else
+	prealloc  [r3, 64]
+#endif
+#ifdef CONFIG_ARC_HAS_LL64
 	std.ab	r4, [r3, 8]
 	std.ab	r4, [r3, 8]
 	std.ab	r4, [r3, 8]
@@ -62,16 +62,45 @@ ENTRY(memset)
 	std.ab	r4, [r3, 8]
 	std.ab	r4, [r3, 8]
 	std.ab	r4, [r3, 8]
+#else
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+#endif
 .Lset64bytes:
 
 	lsr.f	lp_count, r2, 5 ;Last remaining  max 124 bytes
 	lpnz	.Lset32bytes
 	;; LOOP START
 	prefetchw   [r3, 32]	;Prefetch the next write location
+#ifdef CONFIG_ARC_HAS_LL64
 	std.ab	r4, [r3, 8]
 	std.ab	r4, [r3, 8]
 	std.ab	r4, [r3, 8]
 	std.ab	r4, [r3, 8]
+#else
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+#endif
 .Lset32bytes:
 
 	and.f	lp_count, r2, 0x1F ;Last remaining 31 bytes

arch/arc/plat-axs10x/axs10x.c

@@ -389,6 +389,21 @@ axs103_set_freq(unsigned int id, unsigned int fd, unsigned int od)
 
 static void __init axs103_early_init(void)
 {
+	/*
+	 * AXS103 configurations for SMP/QUAD configurations share device tree
+	 * which defaults to 90 MHz. However recent failures of Quad config
+	 * revealed P&R timing violations so clamp it down to safe 50 MHz
+	 * Instead of duplicating defconfig/DT for SMP/QUAD, add a small hack
+	 *
+	 * This hack is really hacky as of now. Fix it properly by getting the
+	 * number of cores as return value of platform's early SMP callback
+	 */
+#ifdef CONFIG_ARC_MCIP
+	unsigned int num_cores = (read_aux_reg(ARC_REG_MCIP_BCR) >> 16) & 0x3F;
+	if (num_cores > 2)
+		arc_set_core_freq(50 * 1000000);
+#endif
+
 	switch (arc_get_core_freq()/1000000) {
 	case 33:
 		axs103_set_freq(1, 1, 1);

arch/arm/boot/dts/dra7.dtsi

@@ -116,7 +116,7 @@
 				ranges = <0 0x2000 0x2000>;
 
 				scm_conf: scm_conf@0 {
-					compatible = "syscon";
+					compatible = "syscon", "simple-bus";
 					reg = <0x0 0x1400>;
 					#address-cells = <1>;
 					#size-cells = <1>;
@@ -1140,6 +1140,7 @@
 				ctrl-module = <&omap_control_sata>;
 				clocks = <&sys_clkin1>, <&sata_ref_clk>;
 				clock-names = "sysclk", "refclk";
+				syscon-pllreset = <&scm_conf 0x3fc>;
 				#phy-cells = <0>;
 			};
 

arch/arm/boot/dts/exynos3250.dtsi

@@ -138,8 +138,8 @@
 
 		mipi_phy: video-phy@10020710 {
 			compatible = "samsung,s5pv210-mipi-video-phy";
-			reg = <0x10020710 8>;
 			#phy-cells = <1>;
+			syscon = <&pmu_system_controller>;
 		};
 
 		pd_cam: cam-power-domain@10023C00 {

arch/arm/boot/dts/exynos4210-origen.dts

@@ -127,6 +127,10 @@
 	};
 };
 
+&cpu0 {
+	cpu0-supply = <&buck1_reg>;
+};
+
 &fimd {
 	pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
 	pinctrl-names = "default";

arch/arm/boot/dts/exynos4210-trats.dts

@@ -188,6 +188,10 @@
 	};
 };
 
+&cpu0 {
+	cpu0-supply = <&varm_breg>;
+};
+
 &dsi_0 {
 	vddcore-supply = <&vusb_reg>;
 	vddio-supply = <&vmipi_reg>;

arch/arm/boot/dts/exynos4210-universal_c210.dts

@@ -548,6 +548,10 @@
 	};
 };
 
+&cpu0 {
+	cpu0-supply = <&vdd_arm_reg>;
+};
+
 &pinctrl_1 {
 	hdmi_hpd: hdmi-hpd {
 		samsung,pins = "gpx3-7";

arch/arm/boot/dts/exynos4210.dtsi

@@ -40,6 +40,18 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0x900>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			clock-latency = <160000>;
+
+			operating-points = <
+				1200000 1250000
+				1000000 1150000
+				800000	1075000
+				500000	975000
+				400000	975000
+				200000	950000
+			>;
 			cooling-min-level = <4>;
 			cooling-max-level = <2>;
 			#cooling-cells = <2>; /* min followed by max */

arch/arm/boot/dts/imx25-pdk.dts

@@ -10,6 +10,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include "imx25.dtsi"
 
@@ -114,8 +115,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio2 1 0>;
+	cd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 0 0>;
+	wp-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx35.dtsi

@@ -286,8 +286,8 @@
 			can1: can@53fe4000 {
 				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
 				reg = <0x53fe4000 0x1000>;
-				clocks = <&clks 33>;
+				clocks = <&clks 33>, <&clks 33>;
-				clock-names = "ipg";
+				clock-names = "ipg", "per";
 				interrupts = <43>;
 				status = "disabled";
 			};
@@ -295,8 +295,8 @@
 			can2: can@53fe8000 {
 				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
 				reg = <0x53fe8000 0x1000>;
-				clocks = <&clks 34>;
+				clocks = <&clks 34>, <&clks 34>;
-				clock-names = "ipg";
+				clock-names = "ipg", "per";
 				interrupts = <44>;
 				status = "disabled";
 			};

arch/arm/boot/dts/imx51-apf51dev.dts

@@ -98,7 +98,7 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
 	status = "okay";
 };

arch/arm/boot/dts/imx53-ard.dts

@@ -103,8 +103,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 0>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 9 0>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx53-m53evk.dts

@@ -124,8 +124,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 0>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 9 0>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx53-qsb-common.dtsi

@@ -147,8 +147,8 @@
 &esdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc3>;
-	cd-gpios = <&gpio3 11 0>;
+	cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio3 12 0>;
+	wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
 	bus-width = <8>;
 	status = "okay";
 };

arch/arm/boot/dts/imx53-smd.dts

@@ -41,8 +41,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 13 0>;
+	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio4 11 0>;
+	wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx53-tqma53.dtsi

@@ -41,8 +41,8 @@
 	pinctrl-0 = <&pinctrl_esdhc2>,
 		    <&pinctrl_esdhc2_cdwp>;
 	vmmc-supply = <&reg_3p3v>;
-	wp-gpios = <&gpio1 2 0>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	cd-gpios = <&gpio1 4 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "disabled";
 };
 

arch/arm/boot/dts/imx53-tx53.dtsi

@@ -183,7 +183,7 @@
 };
 
 &esdhc1 {
-	cd-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
@@ -191,7 +191,7 @@
 };
 
 &esdhc2 {
-	cd-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2>;

arch/arm/boot/dts/imx53-voipac-bsb.dts

@@ -119,8 +119,8 @@
 &esdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2>;
-	cd-gpios = <&gpio3 25 0>;
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 19 0>;
+	wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6dl-riotboard.dts

@@ -305,8 +305,8 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 2 0>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -314,8 +314,8 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio7 1 0>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6q-arm2.dts

@@ -11,6 +11,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6q.dtsi"
 
 / {
@@ -196,8 +197,8 @@
 };
 
 &usdhc3 {
-	cd-gpios = <&gpio6 11 0>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 14 0>;
+	wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3

arch/arm/boot/dts/imx6q-gk802.dts

@@ -7,6 +7,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6q.dtsi"
 
 / {
@@ -161,7 +162,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
-	cd-gpios = <&gpio6 11 0>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6q-tbs2910.dts

@@ -251,7 +251,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -260,7 +260,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
-	cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";

arch/arm/boot/dts/imx6qdl-aristainetos.dtsi

@@ -173,7 +173,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -181,7 +181,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi

@@ -392,7 +392,7 @@
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 	no-1-8-v;
 	status = "okay";
 };
@@ -400,7 +400,7 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
 	no-1-8-v;
 	status = "okay";

arch/arm/boot/dts/imx6qdl-cubox-i.dtsi

@@ -258,6 +258,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio1 4 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi

@@ -1,3 +1,5 @@
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	regulators {
 		compatible = "simple-bus";
@@ -181,7 +183,7 @@
 &usdhc2 { /* module slot */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio2 2 0>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6qdl-gw52xx.dtsi

@@ -318,7 +318,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-gw53xx.dtsi

@@ -324,7 +324,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-gw54xx.dtsi

@@ -417,7 +417,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-hummingboard.dtsi

@@ -299,6 +299,6 @@
 		&pinctrl_hummingboard_usdhc2
 	>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio1 4 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi

@@ -453,7 +453,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -461,7 +461,7 @@
 &usdhc4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio2 6 0>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi

@@ -409,8 +409,8 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 2 0>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 	status = "disabled";
 };
 
@@ -418,7 +418,7 @@
         pinctrl-names = "default";
         pinctrl-0 = <&pinctrl_usdhc3
 		     &pinctrl_usdhc3_cdwp>;
-        cd-gpios = <&gpio1 27 0>;
+	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-        wp-gpios = <&gpio1 29 0>;
+	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
         status = "disabled";
 };

arch/arm/boot/dts/imx6qdl-rex.dtsi

@@ -342,7 +342,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -351,6 +351,6 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-sabreauto.dtsi

@@ -467,8 +467,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio6 15 0>;
+	cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 13 0>;
+	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6qdl-sabrelite.dtsi

@@ -448,8 +448,8 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio7 1 0>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -457,7 +457,7 @@
 &usdhc4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio2 6 0>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-sabresd.dtsi

@@ -562,8 +562,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <8>;
-	cd-gpios = <&gpio2 2 0>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 3 0>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -571,8 +571,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <8>;
-	cd-gpios = <&gpio2 0 0>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 0>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6qdl-tx6.dtsi

@@ -680,7 +680,7 @@
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	bus-width = <4>;
 	no-1-8-v;
-	cd-gpios = <&gpio7 2 0>;
+	cd-gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	status = "okay";
 };
@@ -690,7 +690,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
 	no-1-8-v;
-	cd-gpios = <&gpio7 3 0>;
+	cd-gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-wandboard.dtsi

@@ -9,6 +9,8 @@
  *
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	regulators {
 		compatible = "simple-bus";
@@ -250,13 +252,13 @@
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 2 0>;
+	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio3 9 0>;
+	cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl.dtsi

@@ -181,10 +181,10 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			                <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			                <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			                <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
 				 <&clks IMX6QDL_CLK_LVDS1_GATE>,
 				 <&clks IMX6QDL_CLK_PCIE_REF_125M>;

arch/arm/boot/dts/imx6sl-evk.dts

@@ -617,8 +617,8 @@
 	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	bus-width = <8>;
-	cd-gpios = <&gpio4 7 0>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio4 6 0>;
+	wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -627,8 +627,8 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	cd-gpios = <&gpio5 0 0>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio4 29 0>;
+	wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -637,6 +637,6 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio3 22 0>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6sx-sabreauto.dts

@@ -49,7 +49,7 @@
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	bus-width = <8>;
-	cd-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
 	keep-power-in-suspend;
 	enable-sdio-wakeup;
@@ -61,7 +61,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
 	bus-width = <8>;
-	cd-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
 	no-1-8-v;
 	keep-power-in-suspend;
 	enable-sdio-wakup;

arch/arm/boot/dts/imx6sx-sdb.dtsi

@@ -293,7 +293,7 @@
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	bus-width = <8>;
-	cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
 	keep-power-in-suspend;
 	enable-sdio-wakeup;
@@ -304,7 +304,7 @@
 &usdhc4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };

arch/arm/boot/dts/imx7d-sdb.dts

@@ -234,8 +234,8 @@
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio5 0 0>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio5 1 0>;
+	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
 	enable-sdio-wakeup;
 	keep-power-in-suspend;
 	status = "okay";

arch/arm/boot/dts/k2e-clocks.dtsi

@@ -13,9 +13,8 @@ clocks {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,main-pll-clock";
 		clocks = <&refclksys>;
-		reg = <0x02620350 4>, <0x02310110 4>;
+		reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
-		reg-names = "control", "multiplier";
+		reg-names = "control", "multiplier", "post-divider";
-		fixed-postdiv = <2>;
 	};
 
 	papllclk: papllclk@2620358 {

arch/arm/boot/dts/k2e.dtsi

@@ -131,10 +131,17 @@
 					<GIC_SPI 376 IRQ_TYPE_EDGE_RISING>;
 			};
 		};
+
+		mdio: mdio@24200f00 {
+			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x24200f00 0x100>;
+			status = "disabled";
+			clocks = <&clkcpgmac>;
+			clock-names = "fck";
+			bus_freq	= <2500000>;
+		};
 		/include/ "k2e-netcp.dtsi"
 	};
 };
-
-&mdio {
-	reg = <0x24200f00 0x100>;
-};

arch/arm/boot/dts/k2hk-clocks.dtsi

@@ -22,9 +22,8 @@ clocks {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,main-pll-clock";
 		clocks = <&refclksys>;
-		reg = <0x02620350 4>, <0x02310110 4>;
+		reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
-		reg-names = "control", "multiplier";
+		reg-names = "control", "multiplier", "post-divider";
-		fixed-postdiv = <2>;
 	};
 
 	papllclk: papllclk@2620358 {

arch/arm/boot/dts/k2hk.dtsi

@@ -98,6 +98,17 @@
 			#gpio-cells = <2>;
 			gpio,syscon-dev = <&devctrl 0x25c>;
 		};
+
+		mdio: mdio@02090300 {
+			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x02090300 0x100>;
+			status = "disabled";
+			clocks = <&clkcpgmac>;
+			clock-names = "fck";
+			bus_freq	= <2500000>;
+		};
 		/include/ "k2hk-netcp.dtsi"
 	};
 };

arch/arm/boot/dts/k2l-clocks.dtsi

@@ -22,9 +22,8 @@ clocks {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,main-pll-clock";
 		clocks = <&refclksys>;
-		reg = <0x02620350 4>, <0x02310110 4>;
+		reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
-		reg-names = "control", "multiplier";
+		reg-names = "control", "multiplier", "post-divider";
-		fixed-postdiv = <2>;
 	};
 
 	papllclk: papllclk@2620358 {

arch/arm/boot/dts/k2l.dtsi

@@ -29,7 +29,6 @@
 	};
 
 	soc {
-
 		/include/ "k2l-clocks.dtsi"
 
 		uart2: serial@02348400 {
@@ -79,6 +78,17 @@
 			#gpio-cells = <2>;
 			gpio,syscon-dev = <&devctrl 0x24c>;
 		};
+
+		mdio: mdio@26200f00 {
+			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x26200f00 0x100>;
+			status = "disabled";
+			clocks = <&clkcpgmac>;
+			clock-names = "fck";
+			bus_freq	= <2500000>;
+		};
 		/include/ "k2l-netcp.dtsi"
 	};
 };
@@ -96,7 +106,3 @@
        /* Pin muxed. Enabled and configured by Bootloader */
        status = "disabled";
 };
-
-&mdio {
-	reg = <0x26200f00 0x100>;
-};

arch/arm/boot/dts/keystone.dtsi

@@ -267,17 +267,6 @@
 				  1 0 0x21000A00 0x00000100>;
 		};
 
-		mdio: mdio@02090300 {
-			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg		= <0x02090300 0x100>;
-			status = "disabled";
-			clocks = <&clkpa>;
-			clock-names = "fck";
-			bus_freq	= <2500000>;
-		};
-
 		kirq0: keystone_irq@26202a0 {
 			compatible = "ti,keystone-irq";
 			interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;

arch/arm/boot/dts/omap2430.dtsi

@@ -51,7 +51,8 @@
 				};
 
 				scm_conf: scm_conf@270 {
-					compatible = "syscon";
+					compatible = "syscon",
+						     "simple-bus";
 					reg = <0x270 0x240>;
 					#address-cells = <1>;
 					#size-cells = <1>;

arch/arm/boot/dts/omap4.dtsi

@@ -191,7 +191,8 @@
 				};
 
 				omap4_padconf_global: omap4_padconf_global@5a0 {
-					compatible = "syscon";
+					compatible = "syscon",
+						     "simple-bus";
 					reg = <0x5a0 0x170>;
 					#address-cells = <1>;
 					#size-cells = <1>;

arch/arm/boot/dts/omap5.dtsi

@@ -180,7 +180,8 @@
 				};
 
 				omap5_padconf_global: omap5_padconf_global@5a0 {
-					compatible = "syscon";
+					compatible = "syscon",
+						     "simple-bus";
 					reg = <0x5a0 0xec>;
 					#address-cells = <1>;
 					#size-cells = <1>;

arch/arm/boot/dts/ste-dbx5x0.dtsi

@@ -15,16 +15,10 @@
 #include "skeleton.dtsi"
 
 / {
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "stericsson,db8500";
-		interrupt-parent = <&intc>;
-		ranges;
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "ste,dbx500-smp";
 
 		cpu-map {
 			cluster0 {
@@ -36,18 +30,25 @@
 				};
 			};
 		};
-			CPU0: cpu@0 {
+		CPU0: cpu@300 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
-				reg = <0>;
+			reg = <0x300>;
 		};
-			CPU1: cpu@1 {
+		CPU1: cpu@301 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
-				reg = <1>;
+			reg = <0x301>;
 		};
 	};
 
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "stericsson,db8500";
+		interrupt-parent = <&intc>;
+		ranges;
+
 		ptm@801ae000 {
 			compatible = "arm,coresight-etm3x", "arm,primecell";
 			reg = <0x801ae000 0x1000>;

arch/arm/boot/dts/ste-nomadik-nhk15.dts

@@ -17,6 +17,7 @@
 	};
 
 	aliases {
+		serial1 = &uart1;
 		stmpe-i2c0 = &stmpe0;
 		stmpe-i2c1 = &stmpe1;
 	};

arch/arm/boot/dts/ste-nomadik-s8815.dts

@@ -15,6 +15,10 @@
 		bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
 	};
 
+	aliases {
+		serial1 = &uart1;
+	};
+
 	src@101e0000 {
 		/* These chrystal drivers are not used on this board */
 		disable-sxtalo;

arch/arm/boot/dts/ste-nomadik-stn8815.dtsi

@@ -757,6 +757,7 @@
 			clock-names = "uartclk", "apb_pclk";
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_default_mux>;
+			status = "disabled";
 		};
 
 		uart1: uart@101fb000 {

arch/arm/kernel/entry-common.S

@@ -61,6 +61,7 @@ work_pending:
 	movlt	scno, #(__NR_restart_syscall - __NR_SYSCALL_BASE)
 	ldmia	sp, {r0 - r6}			@ have to reload r0 - r6
 	b	local_restart			@ ... and off we go
+ENDPROC(ret_fast_syscall)
 
 /*
  * "slow" syscall return path.  "why" tells us if this was a real syscall.

arch/arm/kernel/head.S

@@ -399,6 +399,9 @@ ENTRY(secondary_startup)
 	sub	lr, r4, r5			@ mmu has been enabled
 	add	r3, r7, lr
 	ldrd	r4, [r3, #0]			@ get secondary_data.pgdir
+ARM_BE8(eor	r4, r4, r5)			@ Swap r5 and r4 in BE:
+ARM_BE8(eor	r5, r4, r5)			@ it can be done in 3 steps
+ARM_BE8(eor	r4, r4, r5)			@ without using a temp reg.
 	ldr	r8, [r3, #8]			@ get secondary_data.swapper_pg_dir
 	badr	lr, __enable_mmu		@ return address
 	mov	r13, r12			@ __secondary_switched address

arch/arm/kernel/vdso.c

@@ -296,7 +296,6 @@ static bool tk_is_cntvct(const struct timekeeper *tk)
  */
 void update_vsyscall(struct timekeeper *tk)
 {
-	struct timespec xtime_coarse;
 	struct timespec64 *wtm = &tk->wall_to_monotonic;
 
 	if (!cntvct_ok) {
@@ -308,10 +307,10 @@ void update_vsyscall(struct timekeeper *tk)
 
 	vdso_write_begin(vdso_data);
 
-	xtime_coarse = __current_kernel_time();
 	vdso_data->tk_is_cntvct			= tk_is_cntvct(tk);
-	vdso_data->xtime_coarse_sec		= xtime_coarse.tv_sec;
+	vdso_data->xtime_coarse_sec		= tk->xtime_sec;
-	vdso_data->xtime_coarse_nsec		= xtime_coarse.tv_nsec;
+	vdso_data->xtime_coarse_nsec		= (u32)(tk->tkr_mono.xtime_nsec >>
+							tk->tkr_mono.shift);
 	vdso_data->wtm_clock_sec		= wtm->tv_sec;
 	vdso_data->wtm_clock_nsec		= wtm->tv_nsec;
 

arch/arm/mach-exynos/pm_domains.c

@@ -146,9 +146,8 @@ static __init int exynos4_pm_init_power_domain(void)
 		pd->base = of_iomap(np, 0);
 		if (!pd->base) {
 			pr_warn("%s: failed to map memory\n", __func__);
-			kfree(pd->pd.name);
+			kfree_const(pd->pd.name);
 			kfree(pd);
-			of_node_put(np);
 			continue;
 		}
 

arch/arm/mach-omap2/omap_hwmod.c

@@ -2373,6 +2373,9 @@ static int of_dev_hwmod_lookup(struct device_node *np,
  * registers.  This address is needed early so the OCP registers that
  * are part of the device's address space can be ioremapped properly.
  *
+ * If SYSC access is not needed, the registers will not be remapped
+ * and non-availability of MPU access is not treated as an error.
+ *
  * Returns 0 on success, -EINVAL if an invalid hwmod is passed, and
  * -ENXIO on absent or invalid register target address space.
  */
@@ -2387,6 +2390,11 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
 
 	_save_mpu_port_index(oh);
 
+	/* if we don't need sysc access we don't need to ioremap */
+	if (!oh->class->sysc)
+		return 0;
+
+	/* we can't continue without MPU PORT if we need sysc access */
 	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
 		return -ENXIO;
 
@@ -2396,8 +2404,10 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
 			 oh->name);
 
 		/* Extract the IO space from device tree blob */
-		if (!np)
+		if (!np) {
+			pr_err("omap_hwmod: %s: no dt node\n", oh->name);
 			return -ENXIO;
+		}
 
 		va_start = of_iomap(np, index + oh->mpu_rt_idx);
 	} else {
@@ -2456,14 +2466,12 @@ static int __init _init(struct omap_hwmod *oh, void *data)
 				oh->name, np->name);
 	}
 
-	if (oh->class->sysc) {
 	r = _init_mpu_rt_base(oh, NULL, index, np);
 	if (r < 0) {
 		WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n",
 		     oh->name);
 		return 0;
 	}
-	}
 
 	r = _init_clocks(oh, NULL);
 	if (r < 0) {

arch/arm/mach-omap2/omap_hwmod_7xx_data.c

@@ -827,8 +827,7 @@ static struct omap_hwmod_class_sysconfig dra7xx_gpmc_sysc = {
 	.syss_offs	= 0x0014,
 	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
 			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-			   SIDLE_SMART_WKUP),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
@@ -844,7 +843,7 @@ static struct omap_hwmod dra7xx_gpmc_hwmod = {
 	.class		= &dra7xx_gpmc_hwmod_class,
 	.clkdm_name	= "l3main1_clkdm",
 	/* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */
-	.flags		= HWMOD_SWSUP_SIDLE | DEBUG_OMAP_GPMC_HWMOD_FLAGS,
+	.flags		= DEBUG_OMAP_GPMC_HWMOD_FLAGS,
 	.main_clk	= "l3_iclk_div",
 	.prcm = {
 		.omap4 = {

arch/arm/net/bpf_jit_32.c

@@ -74,31 +74,51 @@ struct jit_ctx {
 
 int bpf_jit_enable __read_mostly;
 
-static u64 jit_get_skb_b(struct sk_buff *skb, unsigned offset)
+static inline int call_neg_helper(struct sk_buff *skb, int offset, void *ret,
+		      unsigned int size)
+{
+	void *ptr = bpf_internal_load_pointer_neg_helper(skb, offset, size);
+
+	if (!ptr)
+		return -EFAULT;
+	memcpy(ret, ptr, size);
+	return 0;
+}
+
+static u64 jit_get_skb_b(struct sk_buff *skb, int offset)
 {
 	u8 ret;
 	int err;
 
+	if (offset < 0)
+		err = call_neg_helper(skb, offset, &ret, 1);
+	else
 		err = skb_copy_bits(skb, offset, &ret, 1);
 
 	return (u64)err << 32 | ret;
 }
 
-static u64 jit_get_skb_h(struct sk_buff *skb, unsigned offset)
+static u64 jit_get_skb_h(struct sk_buff *skb, int offset)
 {
 	u16 ret;
 	int err;
 
+	if (offset < 0)
+		err = call_neg_helper(skb, offset, &ret, 2);
+	else
 		err = skb_copy_bits(skb, offset, &ret, 2);
 
 	return (u64)err << 32 | ntohs(ret);
 }
 
-static u64 jit_get_skb_w(struct sk_buff *skb, unsigned offset)
+static u64 jit_get_skb_w(struct sk_buff *skb, int offset)
 {
 	u32 ret;
 	int err;
 
+	if (offset < 0)
+		err = call_neg_helper(skb, offset, &ret, 4);
+	else
 		err = skb_copy_bits(skb, offset, &ret, 4);
 
 	return (u64)err << 32 | ntohl(ret);
@@ -536,9 +556,6 @@ static int build_body(struct jit_ctx *ctx)
 		case BPF_LD | BPF_B | BPF_ABS:
 			load_order = 0;
 load:
-			/* the interpreter will deal with the negative K */
-			if ((int)k < 0)
-				return -ENOTSUPP;
 			emit_mov_i(r_off, k, ctx);
 load_common:
 			ctx->seen |= SEEN_DATA | SEEN_CALL;
@@ -547,12 +564,24 @@ load_common:
 				emit(ARM_SUB_I(r_scratch, r_skb_hl,
 					       1 << load_order), ctx);
 				emit(ARM_CMP_R(r_scratch, r_off), ctx);
-				condt = ARM_COND_HS;
+				condt = ARM_COND_GE;
 			} else {
 				emit(ARM_CMP_R(r_skb_hl, r_off), ctx);
 				condt = ARM_COND_HI;
 			}
 
+			/*
+			 * test for negative offset, only if we are
+			 * currently scheduled to take the fast
+			 * path. this will update the flags so that
+			 * the slowpath instruction are ignored if the
+			 * offset is negative.
+			 *
+			 * for loard_order == 0 the HI condition will
+			 * make loads at offset 0 take the slow path too.
+			 */
+			_emit(condt, ARM_CMP_I(r_off, 0), ctx);
+
 			_emit(condt, ARM_ADD_R(r_scratch, r_off, r_skb_data),
 			      ctx);
 
@@ -860,9 +889,11 @@ b_epilogue:
 			off = offsetof(struct sk_buff, vlan_tci);
 			emit(ARM_LDRH_I(r_A, r_skb, off), ctx);
 			if (code == (BPF_ANC | SKF_AD_VLAN_TAG))
-				OP_IMM3(ARM_AND, r_A, r_A, VLAN_VID_MASK, ctx);
+				OP_IMM3(ARM_AND, r_A, r_A, ~VLAN_TAG_PRESENT, ctx);
-			else
+			else {
-				OP_IMM3(ARM_AND, r_A, r_A, VLAN_TAG_PRESENT, ctx);
+				OP_IMM3(ARM_LSR, r_A, r_A, 12, ctx);
+				OP_IMM3(ARM_AND, r_A, r_A, 0x1, ctx);
+			}
 			break;
 		case BPF_ANC | SKF_AD_QUEUE:
 			ctx->seen |= SEEN_SKB;

arch/arm/vdso/Makefile

@@ -14,7 +14,7 @@ VDSO_LDFLAGS += -Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096
 VDSO_LDFLAGS += -nostdlib -shared
 VDSO_LDFLAGS += $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
 VDSO_LDFLAGS += $(call cc-ldoption, -Wl$(comma)--build-id)
-VDSO_LDFLAGS += $(call cc-option, -fuse-ld=bfd)
+VDSO_LDFLAGS += $(call cc-ldoption, -fuse-ld=bfd)
 
 obj-$(CONFIG_VDSO) += vdso.o
 extra-$(CONFIG_VDSO) += vdso.lds

arch/arm64/boot/dts/apm/apm-storm.dtsi

@@ -823,7 +823,7 @@
 			device_type = "dma";
 			reg = <0x0 0x1f270000 0x0 0x10000>,
 			      <0x0 0x1f200000 0x0 0x10000>,
-			      <0x0 0x1b008000 0x0 0x2000>,
+			      <0x0 0x1b000000 0x0 0x400000>,
 			      <0x0 0x1054a000 0x0 0x100>;
 			interrupts = <0x0 0x82 0x4>,
 				     <0x0 0xb8 0x4>,

arch/arm64/kernel/efi.c

@@ -122,12 +122,12 @@ static int __init uefi_init(void)
 
 	/* Show what we know for posterity */
 	c16 = early_memremap(efi_to_phys(efi.systab->fw_vendor),
-			     sizeof(vendor));
+			     sizeof(vendor) * sizeof(efi_char16_t));
 	if (c16) {
 		for (i = 0; i < (int) sizeof(vendor) - 1 && *c16; ++i)
 			vendor[i] = c16[i];
 		vendor[i] = '\0';
-		early_memunmap(c16, sizeof(vendor));
+		early_memunmap(c16, sizeof(vendor) * sizeof(efi_char16_t));
 	}
 
 	pr_info("EFI v%u.%.02u by %s\n",

arch/arm64/kernel/entry.S

@@ -585,7 +585,8 @@ ENDPROC(el0_irq)
  *
  */
 ENTRY(cpu_switch_to)
-	add	x8, x0, #THREAD_CPU_CONTEXT
+	mov	x10, #THREAD_CPU_CONTEXT
+	add	x8, x0, x10
 	mov	x9, sp
 	stp	x19, x20, [x8], #16		// store callee-saved registers
 	stp	x21, x22, [x8], #16
@@ -594,7 +595,7 @@ ENTRY(cpu_switch_to)
 	stp	x27, x28, [x8], #16
 	stp	x29, x9, [x8], #16
 	str	lr, [x8]
-	add	x8, x1, #THREAD_CPU_CONTEXT
+	add	x8, x1, x10
 	ldp	x19, x20, [x8], #16		// restore callee-saved registers
 	ldp	x21, x22, [x8], #16
 	ldp	x23, x24, [x8], #16

arch/arm64/kernel/irq.c

@@ -61,7 +61,7 @@ void __init init_IRQ(void)
 static bool migrate_one_irq(struct irq_desc *desc)
 {
 	struct irq_data *d = irq_desc_get_irq_data(desc);
-	const struct cpumask *affinity = d->affinity;
+	const struct cpumask *affinity = irq_data_get_affinity_mask(d);
 	struct irq_chip *c;
 	bool ret = false;
 
@@ -81,7 +81,7 @@ static bool migrate_one_irq(struct irq_desc *desc)
 	if (!c->irq_set_affinity)
 		pr_debug("IRQ%u: unable to set affinity\n", d->irq);
 	else if (c->irq_set_affinity(d, affinity, false) == IRQ_SET_MASK_OK && ret)
-		cpumask_copy(d->affinity, affinity);
+		cpumask_copy(irq_data_get_affinity_mask(d), affinity);
 
 	return ret;
 }

arch/arm64/kernel/signal32.c

@@ -168,7 +168,8 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from)
 		 * Other callers might not initialize the si_lsb field,
 		 * so check explicitely for the right codes here.
 		 */
-		if (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO)
+		if (from->si_signo == SIGBUS &&
+		    (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO))
 			err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb);
 #endif
 		break;
@@ -201,8 +202,6 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from)
 
 int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
 {
-	memset(to, 0, sizeof *to);
-
 	if (copy_from_user(to, from, __ARCH_SI_PREAMBLE_SIZE) ||
 	    copy_from_user(to->_sifields._pad,
 			   from->_sifields._pad, SI_PAD_SIZE))

arch/arm64/kernel/vdso.c

@@ -199,16 +199,15 @@ up_fail:
  */
 void update_vsyscall(struct timekeeper *tk)
 {
-	struct timespec xtime_coarse;
 	u32 use_syscall = strcmp(tk->tkr_mono.clock->name, "arch_sys_counter");
 
 	++vdso_data->tb_seq_count;
 	smp_wmb();
 
-	xtime_coarse = __current_kernel_time();
 	vdso_data->use_syscall			= use_syscall;
-	vdso_data->xtime_coarse_sec		= xtime_coarse.tv_sec;
+	vdso_data->xtime_coarse_sec		= tk->xtime_sec;
-	vdso_data->xtime_coarse_nsec		= xtime_coarse.tv_nsec;
+	vdso_data->xtime_coarse_nsec		= tk->tkr_mono.xtime_nsec >>
+							tk->tkr_mono.shift;
 	vdso_data->wtm_clock_sec		= tk->wall_to_monotonic.tv_sec;
 	vdso_data->wtm_clock_nsec		= tk->wall_to_monotonic.tv_nsec;
 

arch/avr32/kernel/time.c

@@ -18,6 +18,7 @@
 
 #include <mach/pm.h>
 
+static bool disable_cpu_idle_poll;
 
 static cycle_t read_cycle_count(struct clocksource *cs)
 {
@@ -80,36 +81,34 @@ static int comparator_next_event(unsigned long delta,
 	return 0;
 }
 
-static void comparator_mode(enum clock_event_mode mode,
+static int comparator_shutdown(struct clock_event_device *evdev)
-		struct clock_event_device *evdev)
 {
-	switch (mode) {
+	pr_debug("%s: %s\n", __func__, evdev->name);
-	case CLOCK_EVT_MODE_ONESHOT:
-		pr_debug("%s: start\n", evdev->name);
-		/* FALLTHROUGH */
-	case CLOCK_EVT_MODE_RESUME:
-		/*
-		 * If we're using the COUNT and COMPARE registers we
-		 * need to force idle poll.
-		 */
-		cpu_idle_poll_ctrl(true);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
 	sysreg_write(COMPARE, 0);
-		pr_debug("%s: stop\n", evdev->name);
+
-		if (evdev->mode == CLOCK_EVT_MODE_ONESHOT ||
+	if (disable_cpu_idle_poll) {
-		    evdev->mode == CLOCK_EVT_MODE_RESUME) {
+		disable_cpu_idle_poll = false;
 		/*
 		 * Only disable idle poll if we have forced that
 		 * in a previous call.
 		 */
 		cpu_idle_poll_ctrl(false);
 	}
-		break;
+	return 0;
-	default:
+}
-		BUG();
+
-	}
+static int comparator_set_oneshot(struct clock_event_device *evdev)
+{
+	pr_debug("%s: %s\n", __func__, evdev->name);
+
+	disable_cpu_idle_poll = true;
+	/*
+	 * If we're using the COUNT and COMPARE registers we
+	 * need to force idle poll.
+	 */
+	cpu_idle_poll_ctrl(true);
+
+	return 0;
 }
 
 static struct clock_event_device comparator = {
@@ -118,7 +117,9 @@ static struct clock_event_device comparator = {
 	.shift			= 16,
 	.rating			= 50,
 	.set_next_event		= comparator_next_event,
-	.set_mode	= comparator_mode,
+	.set_state_shutdown	= comparator_shutdown,
+	.set_state_oneshot	= comparator_set_oneshot,
+	.tick_resume		= comparator_set_oneshot,
 };
 
 void read_persistent_clock(struct timespec *ts)

arch/avr32/mach-at32ap/clock.c

@@ -80,6 +80,9 @@ int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
 
+	if (!clk)
+		return 0;
+
 	spin_lock_irqsave(&clk_lock, flags);
 	__clk_enable(clk);
 	spin_unlock_irqrestore(&clk_lock, flags);
@@ -106,6 +109,9 @@ void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
 
+	if (IS_ERR_OR_NULL(clk))
+		return;
+
 	spin_lock_irqsave(&clk_lock, flags);
 	__clk_disable(clk);
 	spin_unlock_irqrestore(&clk_lock, flags);
@@ -117,6 +123,9 @@ unsigned long clk_get_rate(struct clk *clk)
 	unsigned long flags;
 	unsigned long rate;
 
+	if (!clk)
+		return 0;
+
 	spin_lock_irqsave(&clk_lock, flags);
 	rate = clk->get_rate(clk);
 	spin_unlock_irqrestore(&clk_lock, flags);
@@ -129,6 +138,9 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 {
 	unsigned long flags, actual_rate;
 
+	if (!clk)
+		return 0;
+
 	if (!clk->set_rate)
 		return -ENOSYS;
 
@@ -145,6 +157,9 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 	unsigned long flags;
 	long ret;
 
+	if (!clk)
+		return 0;
+
 	if (!clk->set_rate)
 		return -ENOSYS;
 
@@ -161,6 +176,9 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 	unsigned long flags;
 	int ret;
 
+	if (!clk)
+		return 0;
+
 	if (!clk->set_parent)
 		return -ENOSYS;
 
@@ -174,7 +192,7 @@ EXPORT_SYMBOL(clk_set_parent);
 
 struct clk *clk_get_parent(struct clk *clk)
 {
-	return clk->parent;
+	return !clk ? NULL : clk->parent;
 }
 EXPORT_SYMBOL(clk_get_parent);
 

arch/m32r/include/asm/io.h

@@ -174,6 +174,11 @@ static inline void _writel(unsigned long l, unsigned long addr)
 #define iowrite16 writew
 #define iowrite32 writel
 
+#define ioread16be(addr)	be16_to_cpu(readw(addr))
+#define ioread32be(addr)	be32_to_cpu(readl(addr))
+#define iowrite16be(v, addr)	writew(cpu_to_be16(v), (addr))
+#define iowrite32be(v, addr)	writel(cpu_to_be32(v), (addr))
+
 #define mmiowb()
 
 #define flush_write_buffers() do { } while (0)  /* M32R_FIXME */

arch/mips/Kconfig

@@ -151,7 +151,6 @@ config BMIPS_GENERIC
 	select BCM7120_L2_IRQ
 	select BRCMSTB_L2_IRQ
 	select IRQ_MIPS_CPU
-	select RAW_IRQ_ACCESSORS
 	select DMA_NONCOHERENT
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN