TTY/Serial driver patches for 3.19-rc1

Here's the big tty/serial driver update for 3.19-rc1.
 
 There are a number of TTY core changes/fixes in here from Peter Hurley
 that have all been teted in linux-next for a long time now.  There are
 also the normal serial driver updates as well, full details in the
 changelog below.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD/MACgkQMUfUDdst+ymW+wCfbSzoYMRObIImMPWfoQtxkvvN
 rpkAnAtyEP/zZIfkQIuKTSH6FJxocF8V
 =WZt3
 -----END PGP SIGNATURE-----

Merge tag 'tty-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here's the big tty/serial driver update for 3.19-rc1.

  There are a number of TTY core changes/fixes in here from Peter Hurley
  that have all been teted in linux-next for a long time now.  There are
  also the normal serial driver updates as well, full details in the
  changelog below"

* tag 'tty-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (219 commits)
  serial: pxa: hold port.lock when reporting modem line changes
  tty-hvsi_lib: Deletion of an unnecessary check before the function call "tty_kref_put"
  tty: Deletion of unnecessary checks before two function calls
  n_tty: Fix read_buf race condition, increment read_head after pushing data
  serial: of-serial: add PM suspend/resume support
  Revert "serial: of-serial: add PM suspend/resume support"
  Revert "serial: of-serial: fix up PM ops on no_console_suspend and port type"
  serial: 8250: don't attempt a trylock if in sysrq
  serial: core: Add big-endian iotype
  serial: samsung: use port->fifosize instead of hardcoded values
  serial: samsung: prefer to use fifosize from driver data
  serial: samsung: fix style problems
  serial: samsung: wait for transfer completion before clock disable
  serial: icom: fix error return code
  serial: tegra: clean up tty-flag assignments
  serial: Fix io address assign flow with Fintek PCI-to-UART Product
  serial: mxs-auart: fix tx_empty against shift register
  serial: mxs-auart: fix gpio change detection on interrupt
  serial: mxs-auart: Fix mxs_auart_set_ldisc()
  serial: 8250_dw: Use 64-bit access for OCTEON.
  ...

include/uapi/linux/serial_core.h

@@ -54,7 +54,8 @@
 #define PORT_ALTR_16550_F32 26	/* Altera 16550 UART with 32 FIFOs */
 #define PORT_ALTR_16550_F64 27	/* Altera 16550 UART with 64 FIFOs */
 #define PORT_ALTR_16550_F128 28 /* Altera 16550 UART with 128 FIFOs */
-#define PORT_MAX_8250	28	/* max port ID */
+#define PORT_RT2880	29	/* Ralink RT2880 internal UART */
+#define PORT_MAX_8250	29	/* max port ID */
 
 /*
  * ARM specific type numbers.  These are not currently guaranteed

include/uapi/linux/serial_reg.h

@@ -359,6 +359,7 @@
 #define UART_OMAP_SYSC		0x15	/* System configuration register */
 #define UART_OMAP_SYSS		0x16	/* System status register */
 #define UART_OMAP_WER		0x17	/* Wake-up enable register */
+#define UART_OMAP_TX_LVL	0x1a	/* TX FIFO level register */
 
 /*
  * These are the definitions for the MDR1 register

include/uapi/linux/tty_flags.h

@@ -6,27 +6,31 @@
  * shared by the tty_port flags structures.
  *
  * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
+ *
+ * Bits [0..ASYNCB_LAST_USER] are userspace defined/visible/changeable
+ * [x] in the bit comments indicates the flag is defunct and no longer used.
  */
 #define ASYNCB_HUP_NOTIFY	 0 /* Notify getty on hangups and closes
 				    * on the callout port */
 #define ASYNCB_FOURPORT		 1 /* Set OU1, OUT2 per AST Fourport settings */
 #define ASYNCB_SAK		 2 /* Secure Attention Key (Orange book) */
-#define ASYNCB_SPLIT_TERMIOS	 3 /* Separate termios for dialin/callout */
+#define ASYNCB_SPLIT_TERMIOS	 3 /* [x] Separate termios for dialin/callout */
 #define ASYNCB_SPD_HI		 4 /* Use 56000 instead of 38400 bps */
 #define ASYNCB_SPD_VHI		 5 /* Use 115200 instead of 38400 bps */
 #define ASYNCB_SKIP_TEST	 6 /* Skip UART test during autoconfiguration */
 #define ASYNCB_AUTO_IRQ		 7 /* Do automatic IRQ during
 				    * autoconfiguration */
-#define ASYNCB_SESSION_LOCKOUT	 8 /* Lock out cua opens based on session */
-#define ASYNCB_PGRP_LOCKOUT	 9 /* Lock out cua opens based on pgrp */
-#define ASYNCB_CALLOUT_NOHUP	10 /* Don't do hangups for cua device */
+#define ASYNCB_SESSION_LOCKOUT	 8 /* [x] Lock out cua opens based on session */
+#define ASYNCB_PGRP_LOCKOUT	 9 /* [x] Lock out cua opens based on pgrp */
+#define ASYNCB_CALLOUT_NOHUP	10 /* [x] Don't do hangups for cua device */
 #define ASYNCB_HARDPPS_CD	11 /* Call hardpps when CD goes high  */
 #define ASYNCB_SPD_SHI		12 /* Use 230400 instead of 38400 bps */
 #define ASYNCB_LOW_LATENCY	13 /* Request low latency behaviour */
 #define ASYNCB_BUGGY_UART	14 /* This is a buggy UART, skip some safety
 				    * checks.  Note: can be dangerous! */
-#define ASYNCB_AUTOPROBE	15 /* Port was autoprobed by PCI or PNP code */
-#define ASYNCB_LAST_USER	15
+#define ASYNCB_AUTOPROBE	15 /* [x] Port was autoprobed by PCI/PNP code */
+#define ASYNCB_MAGIC_MULTIPLIER	16 /* Use special CLK or divisor */
+#define ASYNCB_LAST_USER	16
 
 /* Internal flags used only by kernel */
 #define ASYNCB_INITIALIZED	31 /* Serial port was initialized */
@@ -57,8 +61,11 @@
 #define ASYNC_LOW_LATENCY	(1U << ASYNCB_LOW_LATENCY)
 #define ASYNC_BUGGY_UART	(1U << ASYNCB_BUGGY_UART)
 #define ASYNC_AUTOPROBE		(1U << ASYNCB_AUTOPROBE)
+#define ASYNC_MAGIC_MULTIPLIER	(1U << ASYNCB_MAGIC_MULTIPLIER)
 
 #define ASYNC_FLAGS		((1U << (ASYNCB_LAST_USER + 1)) - 1)
+#define ASYNC_DEPRECATED	(ASYNC_SESSION_LOCKOUT | ASYNC_PGRP_LOCKOUT | \
+		ASYNC_CALLOUT_NOHUP | ASYNC_AUTOPROBE)
 #define ASYNC_USR_MASK		(ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
 		ASYNC_LOW_LATENCY)
 #define ASYNC_SPD_CUST		(ASYNC_SPD_HI|ASYNC_SPD_VHI)

include/uapi/linux/vt.h

@@ -84,7 +84,4 @@ struct vt_setactivate {
 
 #define VT_SETACTIVATE	0x560F	/* Activate and set the mode of a console */
 
-
-#define vt_get_kmsg_redirect() vt_kmsg_redirect(-1)
-
 #endif /* _UAPI_LINUX_VT_H */