forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

MMC highlights for 3.8:

Browse source 
Core:
  - Expose access to the eMMC RPMB ("Replay Protected Memory Block") area
    by extending the existing mmc_block ioctl.
  - Add SDIO powered-suspend DT properties to the core MMC DT binding.
  - Add no-1-8-v DT flag for boards where the SD controller reports that it
    supports 1.8V but the board itself has no way to switch to 1.8V.
  - More work on switching to 1.8V UHS support using a vqmmc regulator.
  - Fix up a case where the slot-gpio helper may fail to reset the host
    controller properly if a card was removed during a transfer.
  - Fix several cases where a broken device could cause an infinite loop
    while we wait for a register to update.
 
 Drivers:
  - at91-mci: Remove obsolete driver, atmel-mci handles these devices now.
  - sdhci-dove: Allow using GPIOs for card-detect notifications.
  - sdhci-esdhc: Fix for recovering from ADMA errors on broken silicon.
  - sdhci-s3c: Add pinctrl support.
  - wmt-sdmmc: New driver for WonderMedia SD/MMC controllers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQxpwoAAoJEHNBYZ7TNxYMir0P/in5xv6vVq+06hMb9JTA2+M0
 +eSgNAoSQt3Zn3dTxGtcaMbrnVvegMD2sRmnHncSKoi6iUgWh7RhuT7o8vp2zgJe
 KbuOF/OF5+RSnLwgCMcOCjauhBtHO7s+NPNbUH4DMN2/xQ7fpiY+QIsxrKWtImyO
 E4v62zRm/6aa1IfGDgYTAlX8Y1QfEQhH55OYrF9UzU1m7TKsSGxYTXwx+LeLQZQ0
 j6HO+FVlmu5jbZ4V69z3qNIdiklRGQBE7D+7cJqW6btv7x4oLmyygEoNA8M8ncxX
 g5BD5oEt9oxW5OW8hYcEJ/flDErgekZekH8n+fZoNVDVq8gMJxHOV73mnN+wxRnd
 lRGLhniVOzl4cU+ObcYTBzdUV+2yR3sRHSK8nwtb+HFATetM70gBlpoWni1+sGr5
 qvFhnpzNrj0xCwoQpLerwrvCwPpyko9uxZQwO51HqhugFwWlJuTqQsnCgj+Q4MDE
 CRUq4R6TCH7oMGeGin0qyD7jyigDnh7g4pPNQmuIYJSLsDwvinisz98MQ0XC8szc
 Z1H9YXKch2woLHLPFWzNyAIlJWHXakjk5vb9uSQmkUIto/y7q+LiGVCc5uvny3rU
 pJmda+U/8R8YmSWS7pUi6OmPRfcnPuAIllEwo3lBypVpdP/fcZ6aribrbGEo6DLb
 XLFIHnl3O9/sjfUcMl+L
 =oSX3
 -----END PGP SIGNATURE-----

Merge tag 'mmc-updates-for-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC updates from Chris Ball:
 "MMC highlights for 3.8:

  Core:
   - Expose access to the eMMC RPMB ("Replay Protected Memory Block")
     area by extending the existing mmc_block ioctl.
   - Add SDIO powered-suspend DT properties to the core MMC DT binding.
   - Add no-1-8-v DT flag for boards where the SD controller reports
     that it supports 1.8V but the board itself has no way to switch to
     1.8V.
   - More work on switching to 1.8V UHS support using a vqmmc regulator.
   - Fix up a case where the slot-gpio helper may fail to reset the host
     controller properly if a card was removed during a transfer.
   - Fix several cases where a broken device could cause an infinite
     loop while we wait for a register to update.

  Drivers:
   - at91-mci: Remove obsolete driver, atmel-mci handles these devices
     now.
   - sdhci-dove: Allow using GPIOs for card-detect notifications.
   - sdhci-esdhc: Fix for recovering from ADMA errors on broken silicon.
   - sdhci-s3c: Add pinctrl support.
   - wmt-sdmmc: New driver for WonderMedia SD/MMC controllers."

* tag 'mmc-updates-for-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (65 commits)
  mmc: sdhci: implement the .card_event() method
  mmc: extend the slot-gpio card-detection to use host's .card_event() method
  mmc: add a card-event host operation
  mmc: sdhci-s3c: Fix compilation warning
  mmc: sdhci-pci: Enable SDHCI_CAN_DO_HISPD for Ricoh SDHCI controller
  mmc: sdhci-dove: allow GPIOs to be used for card detection on Dove
  mmc: sdhci-dove: use two-stage initialization for sdhci-pltfm
  mmc: sdhci-dove: use devm_clk_get()
  mmc: eSDHC: Recover from ADMA errors
  mmc: dw_mmc: remove duplicated buswidth code
  mmc: dw_mmc: relocate where dw_mci_setup_bus() is called from
  mmc: Limit MMC speed to 52MHz if not HS200
  mmc: dw_mmc: use devres functions in dw_mmc
  mmc: sh_mmcif: remove unneeded clock connection ID
  mmc: sh_mobile_sdhi: remove unneeded clock connection ID
  mmc: sh_mobile_sdhi: fix clock frequency printing
  mmc: Remove redundant null check before kfree in bus.c
  mmc: Remove redundant null check before kfree in sdio_bus.c
  mmc: sdhci-imx-esdhc: use more devm_* functions
  mmc: dt: add no-1-8-v device tree flag
  ...
This commit is contained in:
Linus Torvalds 2012-12-11 11:19:09 -08:00
commit 11b84c5857
52 changed files with 1781 additions and 1722 deletions
Download patch file Download diff file Expand all files Collapse all files

6
include/linux/platform_data/pxa_sdhci.h
View file

@ -38,6 +38,7 @@
* @max_speed: the maximum speed supported
* @host_caps: Standard MMC host capabilities bit field.
* @quirks: quirks of platfrom
* @quirks2: quirks2 of platfrom
* @pm_caps: pm_caps of platfrom
*/
struct sdhci_pxa_platdata {
@ -48,9 +49,10 @@ struct sdhci_pxa_platdata {
unsigned int ext_cd_gpio;
bool ext_cd_gpio_invert;
unsigned int max_speed;
unsigned int host_caps;
unsigned int host_caps2;
u32 host_caps;
u32 host_caps2;
unsigned int quirks;
unsigned int quirks2;
unsigned int pm_caps;
};