| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | /**
 | 
					
						
							|  |  |  |  * core.h - DesignWare USB3 DRD Core Header | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
 | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * Authors: Felipe Balbi <balbi@ti.com>, | 
					
						
							|  |  |  |  *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de> | 
					
						
							|  |  |  |  * | 
					
						
							| 
									
										
										
										
											2013-06-30 14:15:11 +03:00
										 |  |  |  * This program is free software: you can redistribute it and/or modify | 
					
						
							|  |  |  |  * it under the terms of the GNU General Public License version 2  of | 
					
						
							|  |  |  |  * the License as published by the Free Software Foundation. | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  |  * | 
					
						
							| 
									
										
										
										
											2013-06-30 14:15:11 +03:00
										 |  |  |  * This program is distributed in the hope that it will be useful, | 
					
						
							|  |  |  |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
					
						
							|  |  |  |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
					
						
							|  |  |  |  * GNU General Public License for more details. | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  |  */ | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #ifndef __DRIVERS_USB_DWC3_CORE_H
 | 
					
						
							|  |  |  | #define __DRIVERS_USB_DWC3_CORE_H
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #include <linux/device.h>
 | 
					
						
							|  |  |  | #include <linux/spinlock.h>
 | 
					
						
							| 
									
										
										
										
											2011-10-12 14:08:26 +03:00
										 |  |  | #include <linux/ioport.h>
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | #include <linux/list.h>
 | 
					
						
							|  |  |  | #include <linux/dma-mapping.h>
 | 
					
						
							|  |  |  | #include <linux/mm.h>
 | 
					
						
							|  |  |  | #include <linux/debugfs.h>
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #include <linux/usb/ch9.h>
 | 
					
						
							|  |  |  | #include <linux/usb/gadget.h>
 | 
					
						
							| 
									
										
										
										
											2013-07-06 07:52:49 -05:00
										 |  |  | #include <linux/usb/otg.h>
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 
 | 
					
						
							|  |  |  | /* Global constants */ | 
					
						
							| 
									
										
										
										
											2012-05-04 12:58:14 +03:00
										 |  |  | #define DWC3_EP0_BOUNCE_SIZE	512
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | #define DWC3_ENDPOINTS_NUM	32
 | 
					
						
							| 
									
										
										
										
											2012-04-24 14:18:39 +03:00
										 |  |  | #define DWC3_XHCI_RESOURCES_NUM	2
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-12-07 21:42:03 +02:00
										 |  |  | #define DWC3_EVENT_SIZE		4	/* bytes */
 | 
					
						
							|  |  |  | #define DWC3_EVENT_MAX_NUM	64	/* 2 events/endpoint */
 | 
					
						
							|  |  |  | #define DWC3_EVENT_BUFFERS_SIZE	(DWC3_EVENT_SIZE * DWC3_EVENT_MAX_NUM)
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | #define DWC3_EVENT_TYPE_MASK	0xfe
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_EVENT_TYPE_DEV	0
 | 
					
						
							|  |  |  | #define DWC3_EVENT_TYPE_CARKIT	3
 | 
					
						
							|  |  |  | #define DWC3_EVENT_TYPE_I2C	4
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_DEVICE_EVENT_DISCONNECT		0
 | 
					
						
							|  |  |  | #define DWC3_DEVICE_EVENT_RESET			1
 | 
					
						
							|  |  |  | #define DWC3_DEVICE_EVENT_CONNECT_DONE		2
 | 
					
						
							|  |  |  | #define DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE	3
 | 
					
						
							|  |  |  | #define DWC3_DEVICE_EVENT_WAKEUP		4
 | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:58 -08:00
										 |  |  | #define DWC3_DEVICE_EVENT_HIBER_REQ		5
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | #define DWC3_DEVICE_EVENT_EOPF			6
 | 
					
						
							|  |  |  | #define DWC3_DEVICE_EVENT_SOF			7
 | 
					
						
							|  |  |  | #define DWC3_DEVICE_EVENT_ERRATIC_ERROR		9
 | 
					
						
							|  |  |  | #define DWC3_DEVICE_EVENT_CMD_CMPL		10
 | 
					
						
							|  |  |  | #define DWC3_DEVICE_EVENT_OVERFLOW		11
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_GEVNTCOUNT_MASK	0xfffc
 | 
					
						
							|  |  |  | #define DWC3_GSNPSID_MASK	0xffff0000
 | 
					
						
							|  |  |  | #define DWC3_GSNPSREV_MASK	0xffff
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-04-24 14:18:39 +03:00
										 |  |  | /* DWC3 registers memory space boundries */ | 
					
						
							|  |  |  | #define DWC3_XHCI_REGS_START		0x0
 | 
					
						
							|  |  |  | #define DWC3_XHCI_REGS_END		0x7fff
 | 
					
						
							|  |  |  | #define DWC3_GLOBALS_REGS_START		0xc100
 | 
					
						
							|  |  |  | #define DWC3_GLOBALS_REGS_END		0xc6ff
 | 
					
						
							|  |  |  | #define DWC3_DEVICE_REGS_START		0xc700
 | 
					
						
							|  |  |  | #define DWC3_DEVICE_REGS_END		0xcbff
 | 
					
						
							|  |  |  | #define DWC3_OTG_REGS_START		0xcc00
 | 
					
						
							|  |  |  | #define DWC3_OTG_REGS_END		0xccff
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | /* Global Registers */ | 
					
						
							|  |  |  | #define DWC3_GSBUSCFG0		0xc100
 | 
					
						
							|  |  |  | #define DWC3_GSBUSCFG1		0xc104
 | 
					
						
							|  |  |  | #define DWC3_GTXTHRCFG		0xc108
 | 
					
						
							|  |  |  | #define DWC3_GRXTHRCFG		0xc10c
 | 
					
						
							|  |  |  | #define DWC3_GCTL		0xc110
 | 
					
						
							|  |  |  | #define DWC3_GEVTEN		0xc114
 | 
					
						
							|  |  |  | #define DWC3_GSTS		0xc118
 | 
					
						
							|  |  |  | #define DWC3_GSNPSID		0xc120
 | 
					
						
							|  |  |  | #define DWC3_GGPIO		0xc124
 | 
					
						
							|  |  |  | #define DWC3_GUID		0xc128
 | 
					
						
							|  |  |  | #define DWC3_GUCTL		0xc12c
 | 
					
						
							|  |  |  | #define DWC3_GBUSERRADDR0	0xc130
 | 
					
						
							|  |  |  | #define DWC3_GBUSERRADDR1	0xc134
 | 
					
						
							|  |  |  | #define DWC3_GPRTBIMAP0		0xc138
 | 
					
						
							|  |  |  | #define DWC3_GPRTBIMAP1		0xc13c
 | 
					
						
							|  |  |  | #define DWC3_GHWPARAMS0		0xc140
 | 
					
						
							|  |  |  | #define DWC3_GHWPARAMS1		0xc144
 | 
					
						
							|  |  |  | #define DWC3_GHWPARAMS2		0xc148
 | 
					
						
							|  |  |  | #define DWC3_GHWPARAMS3		0xc14c
 | 
					
						
							|  |  |  | #define DWC3_GHWPARAMS4		0xc150
 | 
					
						
							|  |  |  | #define DWC3_GHWPARAMS5		0xc154
 | 
					
						
							|  |  |  | #define DWC3_GHWPARAMS6		0xc158
 | 
					
						
							|  |  |  | #define DWC3_GHWPARAMS7		0xc15c
 | 
					
						
							|  |  |  | #define DWC3_GDBGFIFOSPACE	0xc160
 | 
					
						
							|  |  |  | #define DWC3_GDBGLTSSM		0xc164
 | 
					
						
							|  |  |  | #define DWC3_GPRTBIMAP_HS0	0xc180
 | 
					
						
							|  |  |  | #define DWC3_GPRTBIMAP_HS1	0xc184
 | 
					
						
							|  |  |  | #define DWC3_GPRTBIMAP_FS0	0xc188
 | 
					
						
							|  |  |  | #define DWC3_GPRTBIMAP_FS1	0xc18c
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_GUSB2PHYCFG(n)	(0xc200 + (n * 0x04))
 | 
					
						
							|  |  |  | #define DWC3_GUSB2I2CCTL(n)	(0xc240 + (n * 0x04))
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_GUSB2PHYACC(n)	(0xc280 + (n * 0x04))
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_GUSB3PIPECTL(n)	(0xc2c0 + (n * 0x04))
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_GTXFIFOSIZ(n)	(0xc300 + (n * 0x04))
 | 
					
						
							|  |  |  | #define DWC3_GRXFIFOSIZ(n)	(0xc380 + (n * 0x04))
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_GEVNTADRLO(n)	(0xc400 + (n * 0x10))
 | 
					
						
							|  |  |  | #define DWC3_GEVNTADRHI(n)	(0xc404 + (n * 0x10))
 | 
					
						
							|  |  |  | #define DWC3_GEVNTSIZ(n)	(0xc408 + (n * 0x10))
 | 
					
						
							|  |  |  | #define DWC3_GEVNTCOUNT(n)	(0xc40c + (n * 0x10))
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_GHWPARAMS8		0xc600
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* Device Registers */ | 
					
						
							|  |  |  | #define DWC3_DCFG		0xc700
 | 
					
						
							|  |  |  | #define DWC3_DCTL		0xc704
 | 
					
						
							|  |  |  | #define DWC3_DEVTEN		0xc708
 | 
					
						
							|  |  |  | #define DWC3_DSTS		0xc70c
 | 
					
						
							|  |  |  | #define DWC3_DGCMDPAR		0xc710
 | 
					
						
							|  |  |  | #define DWC3_DGCMD		0xc714
 | 
					
						
							|  |  |  | #define DWC3_DALEPENA		0xc720
 | 
					
						
							|  |  |  | #define DWC3_DEPCMDPAR2(n)	(0xc800 + (n * 0x10))
 | 
					
						
							|  |  |  | #define DWC3_DEPCMDPAR1(n)	(0xc804 + (n * 0x10))
 | 
					
						
							|  |  |  | #define DWC3_DEPCMDPAR0(n)	(0xc808 + (n * 0x10))
 | 
					
						
							|  |  |  | #define DWC3_DEPCMD(n)		(0xc80c + (n * 0x10))
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* OTG Registers */ | 
					
						
							|  |  |  | #define DWC3_OCFG		0xcc00
 | 
					
						
							|  |  |  | #define DWC3_OCTL		0xcc04
 | 
					
						
							| 
									
										
										
										
											2013-03-14 16:05:24 +05:30
										 |  |  | #define DWC3_OEVT		0xcc08
 | 
					
						
							|  |  |  | #define DWC3_OEVTEN		0xcc0C
 | 
					
						
							|  |  |  | #define DWC3_OSTS		0xcc10
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 
 | 
					
						
							|  |  |  | /* Bit fields */ | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* Global Configuration Register */ | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:56 -08:00
										 |  |  | #define DWC3_GCTL_PWRDNSCALE(n)	((n) << 19)
 | 
					
						
							| 
									
										
										
										
											2011-09-08 17:39:59 +03:00
										 |  |  | #define DWC3_GCTL_U2RSTECN	(1 << 16)
 | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:56 -08:00
										 |  |  | #define DWC3_GCTL_RAMCLKSEL(x)	(((x) & DWC3_GCTL_CLK_MASK) << 6)
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | #define DWC3_GCTL_CLK_BUS	(0)
 | 
					
						
							|  |  |  | #define DWC3_GCTL_CLK_PIPE	(1)
 | 
					
						
							|  |  |  | #define DWC3_GCTL_CLK_PIPEHALF	(2)
 | 
					
						
							|  |  |  | #define DWC3_GCTL_CLK_MASK	(3)
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-10-17 08:50:39 +03:00
										 |  |  | #define DWC3_GCTL_PRTCAP(n)	(((n) & (3 << 12)) >> 12)
 | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:56 -08:00
										 |  |  | #define DWC3_GCTL_PRTCAPDIR(n)	((n) << 12)
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | #define DWC3_GCTL_PRTCAP_HOST	1
 | 
					
						
							|  |  |  | #define DWC3_GCTL_PRTCAP_DEVICE	2
 | 
					
						
							|  |  |  | #define DWC3_GCTL_PRTCAP_OTG	3
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:58 -08:00
										 |  |  | #define DWC3_GCTL_CORESOFTRESET		(1 << 11)
 | 
					
						
							|  |  |  | #define DWC3_GCTL_SCALEDOWN(n)		((n) << 4)
 | 
					
						
							|  |  |  | #define DWC3_GCTL_SCALEDOWN_MASK	DWC3_GCTL_SCALEDOWN(3)
 | 
					
						
							|  |  |  | #define DWC3_GCTL_DISSCRAMBLE		(1 << 3)
 | 
					
						
							|  |  |  | #define DWC3_GCTL_GBLHIBERNATIONEN	(1 << 1)
 | 
					
						
							|  |  |  | #define DWC3_GCTL_DSBLCLKGTNG		(1 << 0)
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 
 | 
					
						
							|  |  |  | /* Global USB2 PHY Configuration Register */ | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:58 -08:00
										 |  |  | #define DWC3_GUSB2PHYCFG_PHYSOFTRST	(1 << 31)
 | 
					
						
							|  |  |  | #define DWC3_GUSB2PHYCFG_SUSPHY		(1 << 6)
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 
 | 
					
						
							|  |  |  | /* Global USB3 PIPE Control Register */ | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:58 -08:00
										 |  |  | #define DWC3_GUSB3PIPECTL_PHYSOFTRST	(1 << 31)
 | 
					
						
							|  |  |  | #define DWC3_GUSB3PIPECTL_SUSPHY	(1 << 17)
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-01-18 18:04:09 +02:00
										 |  |  | /* Global TX Fifo Size Register */ | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:58 -08:00
										 |  |  | #define DWC3_GTXFIFOSIZ_TXFDEF(n)	((n) & 0xffff)
 | 
					
						
							|  |  |  | #define DWC3_GTXFIFOSIZ_TXFSTADDR(n)	((n) & 0xffff0000)
 | 
					
						
							| 
									
										
										
										
											2012-01-18 18:04:09 +02:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2013-06-12 21:09:26 +03:00
										 |  |  | /* Global Event Size Registers */ | 
					
						
							|  |  |  | #define DWC3_GEVNTSIZ_INTMASK		(1 << 31)
 | 
					
						
							|  |  |  | #define DWC3_GEVNTSIZ_SIZE(n)		((n) & 0xffff)
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-09-30 10:58:50 +03:00
										 |  |  | /* Global HWPARAMS1 Register */ | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:56 -08:00
										 |  |  | #define DWC3_GHWPARAMS1_EN_PWROPT(n)	(((n) & (3 << 24)) >> 24)
 | 
					
						
							| 
									
										
										
										
											2011-09-30 10:58:50 +03:00
										 |  |  | #define DWC3_GHWPARAMS1_EN_PWROPT_NO	0
 | 
					
						
							|  |  |  | #define DWC3_GHWPARAMS1_EN_PWROPT_CLK	1
 | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:58 -08:00
										 |  |  | #define DWC3_GHWPARAMS1_EN_PWROPT_HIB	2
 | 
					
						
							|  |  |  | #define DWC3_GHWPARAMS1_PWROPT(n)	((n) << 24)
 | 
					
						
							|  |  |  | #define DWC3_GHWPARAMS1_PWROPT_MASK	DWC3_GHWPARAMS1_PWROPT(3)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* Global HWPARAMS4 Register */ | 
					
						
							|  |  |  | #define DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(n)	(((n) & (0x0f << 13)) >> 13)
 | 
					
						
							|  |  |  | #define DWC3_MAX_HIBER_SCRATCHBUFS		15
 | 
					
						
							| 
									
										
										
										
											2011-09-30 10:58:50 +03:00
										 |  |  | 
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | /* Device Configuration Register */ | 
					
						
							|  |  |  | #define DWC3_DCFG_DEVADDR(addr)	((addr) << 3)
 | 
					
						
							|  |  |  | #define DWC3_DCFG_DEVADDR_MASK	DWC3_DCFG_DEVADDR(0x7f)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_DCFG_SPEED_MASK	(7 << 0)
 | 
					
						
							|  |  |  | #define DWC3_DCFG_SUPERSPEED	(4 << 0)
 | 
					
						
							|  |  |  | #define DWC3_DCFG_HIGHSPEED	(0 << 0)
 | 
					
						
							|  |  |  | #define DWC3_DCFG_FULLSPEED2	(1 << 0)
 | 
					
						
							|  |  |  | #define DWC3_DCFG_LOWSPEED	(2 << 0)
 | 
					
						
							|  |  |  | #define DWC3_DCFG_FULLSPEED1	(3 << 0)
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:58 -08:00
										 |  |  | #define DWC3_DCFG_LPM_CAP	(1 << 22)
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | /* Device Control Register */ | 
					
						
							|  |  |  | #define DWC3_DCTL_RUN_STOP	(1 << 31)
 | 
					
						
							|  |  |  | #define DWC3_DCTL_CSFTRST	(1 << 30)
 | 
					
						
							|  |  |  | #define DWC3_DCTL_LSFTRST	(1 << 29)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_DCTL_HIRD_THRES_MASK	(0x1f << 24)
 | 
					
						
							| 
									
										
										
										
											2012-06-06 19:18:29 +05:30
										 |  |  | #define DWC3_DCTL_HIRD_THRES(n)	((n) << 24)
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_DCTL_APPL1RES	(1 << 23)
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:58 -08:00
										 |  |  | /* These apply for core versions 1.87a and earlier */ | 
					
						
							|  |  |  | #define DWC3_DCTL_TRGTULST_MASK		(0x0f << 17)
 | 
					
						
							|  |  |  | #define DWC3_DCTL_TRGTULST(n)		((n) << 17)
 | 
					
						
							|  |  |  | #define DWC3_DCTL_TRGTULST_U2		(DWC3_DCTL_TRGTULST(2))
 | 
					
						
							|  |  |  | #define DWC3_DCTL_TRGTULST_U3		(DWC3_DCTL_TRGTULST(3))
 | 
					
						
							|  |  |  | #define DWC3_DCTL_TRGTULST_SS_DIS	(DWC3_DCTL_TRGTULST(4))
 | 
					
						
							|  |  |  | #define DWC3_DCTL_TRGTULST_RX_DET	(DWC3_DCTL_TRGTULST(5))
 | 
					
						
							|  |  |  | #define DWC3_DCTL_TRGTULST_SS_INACT	(DWC3_DCTL_TRGTULST(6))
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* These apply for core versions 1.94a and later */ | 
					
						
							|  |  |  | #define DWC3_DCTL_KEEP_CONNECT	(1 << 19)
 | 
					
						
							|  |  |  | #define DWC3_DCTL_L1_HIBER_EN	(1 << 18)
 | 
					
						
							|  |  |  | #define DWC3_DCTL_CRS		(1 << 17)
 | 
					
						
							|  |  |  | #define DWC3_DCTL_CSS		(1 << 16)
 | 
					
						
							| 
									
										
										
										
											2012-01-18 18:32:29 +02:00
										 |  |  | 
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | #define DWC3_DCTL_INITU2ENA	(1 << 12)
 | 
					
						
							|  |  |  | #define DWC3_DCTL_ACCEPTU2ENA	(1 << 11)
 | 
					
						
							|  |  |  | #define DWC3_DCTL_INITU1ENA	(1 << 10)
 | 
					
						
							|  |  |  | #define DWC3_DCTL_ACCEPTU1ENA	(1 << 9)
 | 
					
						
							|  |  |  | #define DWC3_DCTL_TSTCTRL_MASK	(0xf << 1)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_DCTL_ULSTCHNGREQ_MASK	(0x0f << 5)
 | 
					
						
							|  |  |  | #define DWC3_DCTL_ULSTCHNGREQ(n) (((n) << 5) & DWC3_DCTL_ULSTCHNGREQ_MASK)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_DCTL_ULSTCHNG_NO_ACTION	(DWC3_DCTL_ULSTCHNGREQ(0))
 | 
					
						
							|  |  |  | #define DWC3_DCTL_ULSTCHNG_SS_DISABLED	(DWC3_DCTL_ULSTCHNGREQ(4))
 | 
					
						
							|  |  |  | #define DWC3_DCTL_ULSTCHNG_RX_DETECT	(DWC3_DCTL_ULSTCHNGREQ(5))
 | 
					
						
							|  |  |  | #define DWC3_DCTL_ULSTCHNG_SS_INACTIVE	(DWC3_DCTL_ULSTCHNGREQ(6))
 | 
					
						
							|  |  |  | #define DWC3_DCTL_ULSTCHNG_RECOVERY	(DWC3_DCTL_ULSTCHNGREQ(8))
 | 
					
						
							|  |  |  | #define DWC3_DCTL_ULSTCHNG_COMPLIANCE	(DWC3_DCTL_ULSTCHNGREQ(10))
 | 
					
						
							|  |  |  | #define DWC3_DCTL_ULSTCHNG_LOOPBACK	(DWC3_DCTL_ULSTCHNGREQ(11))
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* Device Event Enable Register */ | 
					
						
							|  |  |  | #define DWC3_DEVTEN_VNDRDEVTSTRCVEDEN	(1 << 12)
 | 
					
						
							|  |  |  | #define DWC3_DEVTEN_EVNTOVERFLOWEN	(1 << 11)
 | 
					
						
							|  |  |  | #define DWC3_DEVTEN_CMDCMPLTEN		(1 << 10)
 | 
					
						
							|  |  |  | #define DWC3_DEVTEN_ERRTICERREN		(1 << 9)
 | 
					
						
							|  |  |  | #define DWC3_DEVTEN_SOFEN		(1 << 7)
 | 
					
						
							|  |  |  | #define DWC3_DEVTEN_EOPFEN		(1 << 6)
 | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:58 -08:00
										 |  |  | #define DWC3_DEVTEN_HIBERNATIONREQEVTEN	(1 << 5)
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | #define DWC3_DEVTEN_WKUPEVTEN		(1 << 4)
 | 
					
						
							|  |  |  | #define DWC3_DEVTEN_ULSTCNGEN		(1 << 3)
 | 
					
						
							|  |  |  | #define DWC3_DEVTEN_CONNECTDONEEN	(1 << 2)
 | 
					
						
							|  |  |  | #define DWC3_DEVTEN_USBRSTEN		(1 << 1)
 | 
					
						
							|  |  |  | #define DWC3_DEVTEN_DISCONNEVTEN	(1 << 0)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* Device Status Register */ | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:58 -08:00
										 |  |  | #define DWC3_DSTS_DCNRD			(1 << 29)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* This applies for core versions 1.87a and earlier */ | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | #define DWC3_DSTS_PWRUPREQ		(1 << 24)
 | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:58 -08:00
										 |  |  | 
 | 
					
						
							|  |  |  | /* These apply for core versions 1.94a and later */ | 
					
						
							|  |  |  | #define DWC3_DSTS_RSS			(1 << 25)
 | 
					
						
							|  |  |  | #define DWC3_DSTS_SSS			(1 << 24)
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | #define DWC3_DSTS_COREIDLE		(1 << 23)
 | 
					
						
							|  |  |  | #define DWC3_DSTS_DEVCTRLHLT		(1 << 22)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_DSTS_USBLNKST_MASK		(0x0f << 18)
 | 
					
						
							|  |  |  | #define DWC3_DSTS_USBLNKST(n)		(((n) & DWC3_DSTS_USBLNKST_MASK) >> 18)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_DSTS_RXFIFOEMPTY		(1 << 17)
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-05-21 14:51:30 +05:30
										 |  |  | #define DWC3_DSTS_SOFFN_MASK		(0x3fff << 3)
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | #define DWC3_DSTS_SOFFN(n)		(((n) & DWC3_DSTS_SOFFN_MASK) >> 3)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_DSTS_CONNECTSPD		(7 << 0)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_DSTS_SUPERSPEED		(4 << 0)
 | 
					
						
							|  |  |  | #define DWC3_DSTS_HIGHSPEED		(0 << 0)
 | 
					
						
							|  |  |  | #define DWC3_DSTS_FULLSPEED2		(1 << 0)
 | 
					
						
							|  |  |  | #define DWC3_DSTS_LOWSPEED		(2 << 0)
 | 
					
						
							|  |  |  | #define DWC3_DSTS_FULLSPEED1		(3 << 0)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* Device Generic Command Register */ | 
					
						
							|  |  |  | #define DWC3_DGCMD_SET_LMP		0x01
 | 
					
						
							|  |  |  | #define DWC3_DGCMD_SET_PERIODIC_PAR	0x02
 | 
					
						
							|  |  |  | #define DWC3_DGCMD_XMIT_FUNCTION	0x03
 | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:58 -08:00
										 |  |  | 
 | 
					
						
							|  |  |  | /* These apply for core versions 1.94a and later */ | 
					
						
							|  |  |  | #define DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO	0x04
 | 
					
						
							|  |  |  | #define DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI	0x05
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | #define DWC3_DGCMD_SELECTED_FIFO_FLUSH	0x09
 | 
					
						
							|  |  |  | #define DWC3_DGCMD_ALL_FIFO_FLUSH	0x0a
 | 
					
						
							|  |  |  | #define DWC3_DGCMD_SET_ENDPOINT_NRDY	0x0c
 | 
					
						
							|  |  |  | #define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK	0x10
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-04-24 16:19:11 +03:00
										 |  |  | #define DWC3_DGCMD_STATUS(n)		(((n) >> 15) & 1)
 | 
					
						
							|  |  |  | #define DWC3_DGCMD_CMDACT		(1 << 10)
 | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:58 -08:00
										 |  |  | #define DWC3_DGCMD_CMDIOC		(1 << 8)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* Device Generic Command Parameter Register */ | 
					
						
							|  |  |  | #define DWC3_DGCMDPAR_FORCE_LINKPM_ACCEPT	(1 << 0)
 | 
					
						
							|  |  |  | #define DWC3_DGCMDPAR_FIFO_NUM(n)		((n) << 0)
 | 
					
						
							|  |  |  | #define DWC3_DGCMDPAR_RX_FIFO			(0 << 5)
 | 
					
						
							|  |  |  | #define DWC3_DGCMDPAR_TX_FIFO			(1 << 5)
 | 
					
						
							|  |  |  | #define DWC3_DGCMDPAR_LOOPBACK_DIS		(0 << 0)
 | 
					
						
							|  |  |  | #define DWC3_DGCMDPAR_LOOPBACK_ENA		(1 << 0)
 | 
					
						
							| 
									
										
										
										
											2012-04-24 16:19:11 +03:00
										 |  |  | 
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | /* Device Endpoint Command Register */ | 
					
						
							|  |  |  | #define DWC3_DEPCMD_PARAM_SHIFT		16
 | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:56 -08:00
										 |  |  | #define DWC3_DEPCMD_PARAM(x)		((x) << DWC3_DEPCMD_PARAM_SHIFT)
 | 
					
						
							|  |  |  | #define DWC3_DEPCMD_GET_RSC_IDX(x)     (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
 | 
					
						
							| 
									
										
										
										
											2012-04-24 16:19:11 +03:00
										 |  |  | #define DWC3_DEPCMD_STATUS(x)		(((x) >> 15) & 1)
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | #define DWC3_DEPCMD_HIPRI_FORCERM	(1 << 11)
 | 
					
						
							|  |  |  | #define DWC3_DEPCMD_CMDACT		(1 << 10)
 | 
					
						
							|  |  |  | #define DWC3_DEPCMD_CMDIOC		(1 << 8)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_DEPCMD_DEPSTARTCFG		(0x09 << 0)
 | 
					
						
							|  |  |  | #define DWC3_DEPCMD_ENDTRANSFER		(0x08 << 0)
 | 
					
						
							|  |  |  | #define DWC3_DEPCMD_UPDATETRANSFER	(0x07 << 0)
 | 
					
						
							|  |  |  | #define DWC3_DEPCMD_STARTTRANSFER	(0x06 << 0)
 | 
					
						
							|  |  |  | #define DWC3_DEPCMD_CLEARSTALL		(0x05 << 0)
 | 
					
						
							|  |  |  | #define DWC3_DEPCMD_SETSTALL		(0x04 << 0)
 | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:58 -08:00
										 |  |  | /* This applies for core versions 1.90a and earlier */ | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | #define DWC3_DEPCMD_GETSEQNUMBER	(0x03 << 0)
 | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:58 -08:00
										 |  |  | /* This applies for core versions 1.94a and later */ | 
					
						
							|  |  |  | #define DWC3_DEPCMD_GETEPSTATE		(0x03 << 0)
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | #define DWC3_DEPCMD_SETTRANSFRESOURCE	(0x02 << 0)
 | 
					
						
							|  |  |  | #define DWC3_DEPCMD_SETEPCONFIG		(0x01 << 0)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* The EP number goes 0..31 so ep0 is always out and ep1 is always in */ | 
					
						
							|  |  |  | #define DWC3_DALEPENA_EP(n)		(1 << n)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_DEPCMD_TYPE_CONTROL	0
 | 
					
						
							|  |  |  | #define DWC3_DEPCMD_TYPE_ISOC		1
 | 
					
						
							|  |  |  | #define DWC3_DEPCMD_TYPE_BULK		2
 | 
					
						
							|  |  |  | #define DWC3_DEPCMD_TYPE_INTR		3
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* Structures */ | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-02-06 11:04:53 +02:00
										 |  |  | struct dwc3_trb; | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 
 | 
					
						
							|  |  |  | /**
 | 
					
						
							|  |  |  |  * struct dwc3_event_buffer - Software event buffer representation | 
					
						
							|  |  |  |  * @buf: _THE_ buffer | 
					
						
							|  |  |  |  * @length: size of this buffer | 
					
						
							| 
									
										
										
										
											2011-07-04 20:20:04 +03:00
										 |  |  |  * @lpos: event offset | 
					
						
							| 
									
										
										
										
											2011-07-04 20:23:14 +03:00
										 |  |  |  * @count: cache of last read event count register | 
					
						
							| 
									
										
										
										
											2011-07-04 20:20:04 +03:00
										 |  |  |  * @flags: flags related to this event buffer | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  |  * @dma: dma_addr_t | 
					
						
							|  |  |  |  * @dwc: pointer to DWC controller | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | struct dwc3_event_buffer { | 
					
						
							|  |  |  | 	void			*buf; | 
					
						
							|  |  |  | 	unsigned		length; | 
					
						
							|  |  |  | 	unsigned int		lpos; | 
					
						
							| 
									
										
										
										
											2011-07-04 20:23:14 +03:00
										 |  |  | 	unsigned int		count; | 
					
						
							| 
									
										
										
										
											2011-07-04 20:20:04 +03:00
										 |  |  | 	unsigned int		flags; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_EVENT_PENDING	BIT(0)
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 
 | 
					
						
							|  |  |  | 	dma_addr_t		dma; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	struct dwc3		*dwc; | 
					
						
							|  |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_EP_FLAG_STALLED	(1 << 0)
 | 
					
						
							|  |  |  | #define DWC3_EP_FLAG_WEDGED	(1 << 1)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_EP_DIRECTION_TX	true
 | 
					
						
							|  |  |  | #define DWC3_EP_DIRECTION_RX	false
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_TRB_NUM		32
 | 
					
						
							|  |  |  | #define DWC3_TRB_MASK		(DWC3_TRB_NUM - 1)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /**
 | 
					
						
							|  |  |  |  * struct dwc3_ep - device side endpoint representation | 
					
						
							|  |  |  |  * @endpoint: usb endpoint | 
					
						
							|  |  |  |  * @request_list: list of requests for this endpoint | 
					
						
							|  |  |  |  * @req_queued: list of requests on this ep which have TRBs setup | 
					
						
							|  |  |  |  * @trb_pool: array of transaction buffers | 
					
						
							|  |  |  |  * @trb_pool_dma: dma address of @trb_pool | 
					
						
							|  |  |  |  * @free_slot: next slot which is going to be used | 
					
						
							|  |  |  |  * @busy_slot: first slot which is owned by HW | 
					
						
							|  |  |  |  * @desc: usb_endpoint_descriptor pointer | 
					
						
							|  |  |  |  * @dwc: pointer to DWC controller | 
					
						
							|  |  |  |  * @flags: endpoint flags (wedged, stalled, ...) | 
					
						
							|  |  |  |  * @current_trb: index of current used trb | 
					
						
							|  |  |  |  * @number: endpoint number (1 - 15) | 
					
						
							|  |  |  |  * @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK | 
					
						
							| 
									
										
										
										
											2012-06-06 12:04:13 +03:00
										 |  |  |  * @resource_index: Resource transfer index | 
					
						
							| 
									
										
										
										
											2013-06-12 23:43:11 +08:00
										 |  |  |  * @interval: the interval on which the ISOC transfer is started | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  |  * @name: a human readable name e.g. ep1out-bulk | 
					
						
							|  |  |  |  * @direction: true for TX, false for RX | 
					
						
							| 
									
										
										
										
											2011-09-30 10:58:47 +03:00
										 |  |  |  * @stream_capable: true when streams are enabled | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  |  */ | 
					
						
							|  |  |  | struct dwc3_ep { | 
					
						
							|  |  |  | 	struct usb_ep		endpoint; | 
					
						
							|  |  |  | 	struct list_head	request_list; | 
					
						
							|  |  |  | 	struct list_head	req_queued; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-02-06 11:04:53 +02:00
										 |  |  | 	struct dwc3_trb		*trb_pool; | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 	dma_addr_t		trb_pool_dma; | 
					
						
							|  |  |  | 	u32			free_slot; | 
					
						
							|  |  |  | 	u32			busy_slot; | 
					
						
							| 
									
										
										
										
											2011-11-29 13:11:21 +02:00
										 |  |  | 	const struct usb_ss_ep_comp_descriptor *comp_desc; | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 	struct dwc3		*dwc; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	unsigned		flags; | 
					
						
							|  |  |  | #define DWC3_EP_ENABLED		(1 << 0)
 | 
					
						
							|  |  |  | #define DWC3_EP_STALL		(1 << 1)
 | 
					
						
							|  |  |  | #define DWC3_EP_WEDGE		(1 << 2)
 | 
					
						
							|  |  |  | #define DWC3_EP_BUSY		(1 << 4)
 | 
					
						
							|  |  |  | #define DWC3_EP_PENDING_REQUEST	(1 << 5)
 | 
					
						
							| 
									
										
										
										
											2012-05-25 18:54:56 +05:30
										 |  |  | #define DWC3_EP_MISSED_ISOC	(1 << 6)
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-08-27 22:26:00 +03:00
										 |  |  | 	/* This last one is specific to EP0 */ | 
					
						
							|  |  |  | #define DWC3_EP0_DIR_IN		(1 << 31)
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 	unsigned		current_trb; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	u8			number; | 
					
						
							|  |  |  | 	u8			type; | 
					
						
							| 
									
										
										
										
											2012-06-06 12:04:13 +03:00
										 |  |  | 	u8			resource_index; | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 	u32			interval; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	char			name[20]; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	unsigned		direction:1; | 
					
						
							| 
									
										
										
										
											2011-09-30 10:58:47 +03:00
										 |  |  | 	unsigned		stream_capable:1; | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | enum dwc3_phy { | 
					
						
							|  |  |  | 	DWC3_PHY_UNKNOWN = 0, | 
					
						
							|  |  |  | 	DWC3_PHY_USB3, | 
					
						
							|  |  |  | 	DWC3_PHY_USB2, | 
					
						
							|  |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-08-30 15:50:40 +03:00
										 |  |  | enum dwc3_ep0_next { | 
					
						
							|  |  |  | 	DWC3_EP0_UNKNOWN = 0, | 
					
						
							|  |  |  | 	DWC3_EP0_COMPLETE, | 
					
						
							|  |  |  | 	DWC3_EP0_NRDY_DATA, | 
					
						
							|  |  |  | 	DWC3_EP0_NRDY_STATUS, | 
					
						
							|  |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | enum dwc3_ep0_state { | 
					
						
							|  |  |  | 	EP0_UNCONNECTED		= 0, | 
					
						
							| 
									
										
										
										
											2011-08-27 22:28:36 +03:00
										 |  |  | 	EP0_SETUP_PHASE, | 
					
						
							|  |  |  | 	EP0_DATA_PHASE, | 
					
						
							|  |  |  | 	EP0_STATUS_PHASE, | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | enum dwc3_link_state { | 
					
						
							|  |  |  | 	/* In SuperSpeed */ | 
					
						
							|  |  |  | 	DWC3_LINK_STATE_U0		= 0x00, /* in HS, means ON */ | 
					
						
							|  |  |  | 	DWC3_LINK_STATE_U1		= 0x01, | 
					
						
							|  |  |  | 	DWC3_LINK_STATE_U2		= 0x02, /* in HS, means SLEEP */ | 
					
						
							|  |  |  | 	DWC3_LINK_STATE_U3		= 0x03, /* in HS, means SUSPEND */ | 
					
						
							|  |  |  | 	DWC3_LINK_STATE_SS_DIS		= 0x04, | 
					
						
							|  |  |  | 	DWC3_LINK_STATE_RX_DET		= 0x05, /* in HS, means Early Suspend */ | 
					
						
							|  |  |  | 	DWC3_LINK_STATE_SS_INACT	= 0x06, | 
					
						
							|  |  |  | 	DWC3_LINK_STATE_POLL		= 0x07, | 
					
						
							|  |  |  | 	DWC3_LINK_STATE_RECOV		= 0x08, | 
					
						
							|  |  |  | 	DWC3_LINK_STATE_HRESET		= 0x09, | 
					
						
							|  |  |  | 	DWC3_LINK_STATE_CMPLY		= 0x0a, | 
					
						
							|  |  |  | 	DWC3_LINK_STATE_LPBK		= 0x0b, | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:58 -08:00
										 |  |  | 	DWC3_LINK_STATE_RESET		= 0x0e, | 
					
						
							|  |  |  | 	DWC3_LINK_STATE_RESUME		= 0x0f, | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 	DWC3_LINK_STATE_MASK		= 0x0f, | 
					
						
							|  |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-02-06 11:04:53 +02:00
										 |  |  | /* TRB Length, PCM and Status */ | 
					
						
							|  |  |  | #define DWC3_TRB_SIZE_MASK	(0x00ffffff)
 | 
					
						
							|  |  |  | #define DWC3_TRB_SIZE_LENGTH(n)	((n) & DWC3_TRB_SIZE_MASK)
 | 
					
						
							|  |  |  | #define DWC3_TRB_SIZE_PCM1(n)	(((n) & 0x03) << 24)
 | 
					
						
							| 
									
										
										
										
											2012-05-21 12:46:26 +05:30
										 |  |  | #define DWC3_TRB_SIZE_TRBSTS(n)	(((n) & (0x0f << 28)) >> 28)
 | 
					
						
							| 
									
										
										
										
											2012-02-06 11:04:53 +02:00
										 |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_TRBSTS_OK			0
 | 
					
						
							|  |  |  | #define DWC3_TRBSTS_MISSED_ISOC		1
 | 
					
						
							|  |  |  | #define DWC3_TRBSTS_SETUP_PENDING	2
 | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:58 -08:00
										 |  |  | #define DWC3_TRB_STS_XFER_IN_PROG	4
 | 
					
						
							| 
									
										
										
										
											2012-02-06 11:04:53 +02:00
										 |  |  | 
 | 
					
						
							|  |  |  | /* TRB Control */ | 
					
						
							|  |  |  | #define DWC3_TRB_CTRL_HWO		(1 << 0)
 | 
					
						
							|  |  |  | #define DWC3_TRB_CTRL_LST		(1 << 1)
 | 
					
						
							|  |  |  | #define DWC3_TRB_CTRL_CHN		(1 << 2)
 | 
					
						
							|  |  |  | #define DWC3_TRB_CTRL_CSP		(1 << 3)
 | 
					
						
							|  |  |  | #define DWC3_TRB_CTRL_TRBCTL(n)		(((n) & 0x3f) << 4)
 | 
					
						
							|  |  |  | #define DWC3_TRB_CTRL_ISP_IMI		(1 << 10)
 | 
					
						
							|  |  |  | #define DWC3_TRB_CTRL_IOC		(1 << 11)
 | 
					
						
							|  |  |  | #define DWC3_TRB_CTRL_SID_SOFN(n)	(((n) & 0xffff) << 14)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_TRBCTL_NORMAL		DWC3_TRB_CTRL_TRBCTL(1)
 | 
					
						
							|  |  |  | #define DWC3_TRBCTL_CONTROL_SETUP	DWC3_TRB_CTRL_TRBCTL(2)
 | 
					
						
							|  |  |  | #define DWC3_TRBCTL_CONTROL_STATUS2	DWC3_TRB_CTRL_TRBCTL(3)
 | 
					
						
							|  |  |  | #define DWC3_TRBCTL_CONTROL_STATUS3	DWC3_TRB_CTRL_TRBCTL(4)
 | 
					
						
							|  |  |  | #define DWC3_TRBCTL_CONTROL_DATA	DWC3_TRB_CTRL_TRBCTL(5)
 | 
					
						
							|  |  |  | #define DWC3_TRBCTL_ISOCHRONOUS_FIRST	DWC3_TRB_CTRL_TRBCTL(6)
 | 
					
						
							|  |  |  | #define DWC3_TRBCTL_ISOCHRONOUS		DWC3_TRB_CTRL_TRBCTL(7)
 | 
					
						
							|  |  |  | #define DWC3_TRBCTL_LINK_TRB		DWC3_TRB_CTRL_TRBCTL(8)
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 
 | 
					
						
							|  |  |  | /**
 | 
					
						
							| 
									
										
										
										
											2012-02-06 11:04:53 +02:00
										 |  |  |  * struct dwc3_trb - transfer request block (hw format) | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  |  * @bpl: DW0-3 | 
					
						
							|  |  |  |  * @bph: DW4-7 | 
					
						
							|  |  |  |  * @size: DW8-B | 
					
						
							|  |  |  |  * @trl: DWC-F | 
					
						
							|  |  |  |  */ | 
					
						
							| 
									
										
										
										
											2012-02-06 11:04:53 +02:00
										 |  |  | struct dwc3_trb { | 
					
						
							|  |  |  | 	u32		bpl; | 
					
						
							|  |  |  | 	u32		bph; | 
					
						
							|  |  |  | 	u32		size; | 
					
						
							|  |  |  | 	u32		ctrl; | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | } __packed; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-09-30 10:58:48 +03:00
										 |  |  | /**
 | 
					
						
							|  |  |  |  * dwc3_hwparams - copy of HWPARAMS registers | 
					
						
							|  |  |  |  * @hwparams0 - GHWPARAMS0 | 
					
						
							|  |  |  |  * @hwparams1 - GHWPARAMS1 | 
					
						
							|  |  |  |  * @hwparams2 - GHWPARAMS2 | 
					
						
							|  |  |  |  * @hwparams3 - GHWPARAMS3 | 
					
						
							|  |  |  |  * @hwparams4 - GHWPARAMS4 | 
					
						
							|  |  |  |  * @hwparams5 - GHWPARAMS5 | 
					
						
							|  |  |  |  * @hwparams6 - GHWPARAMS6 | 
					
						
							|  |  |  |  * @hwparams7 - GHWPARAMS7 | 
					
						
							|  |  |  |  * @hwparams8 - GHWPARAMS8 | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | struct dwc3_hwparams { | 
					
						
							|  |  |  | 	u32	hwparams0; | 
					
						
							|  |  |  | 	u32	hwparams1; | 
					
						
							|  |  |  | 	u32	hwparams2; | 
					
						
							|  |  |  | 	u32	hwparams3; | 
					
						
							|  |  |  | 	u32	hwparams4; | 
					
						
							|  |  |  | 	u32	hwparams5; | 
					
						
							|  |  |  | 	u32	hwparams6; | 
					
						
							|  |  |  | 	u32	hwparams7; | 
					
						
							|  |  |  | 	u32	hwparams8; | 
					
						
							|  |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-10-12 10:44:56 +03:00
										 |  |  | /* HWPARAMS0 */ | 
					
						
							|  |  |  | #define DWC3_MODE(n)		((n) & 0x7)
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-01-18 18:04:09 +02:00
										 |  |  | #define DWC3_MDWIDTH(n)		(((n) & 0xff00) >> 8)
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-10-12 10:44:56 +03:00
										 |  |  | /* HWPARAMS1 */ | 
					
						
							| 
									
										
										
										
											2012-01-18 18:04:09 +02:00
										 |  |  | #define DWC3_NUM_INT(n)		(((n) & (0x3f << 15)) >> 15)
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-05-05 15:53:10 +03:00
										 |  |  | /* HWPARAMS3 */ | 
					
						
							|  |  |  | #define DWC3_NUM_IN_EPS_MASK	(0x1f << 18)
 | 
					
						
							|  |  |  | #define DWC3_NUM_EPS_MASK	(0x3f << 12)
 | 
					
						
							|  |  |  | #define DWC3_NUM_EPS(p)		(((p)->hwparams3 &		\
 | 
					
						
							|  |  |  | 			(DWC3_NUM_EPS_MASK)) >> 12) | 
					
						
							|  |  |  | #define DWC3_NUM_IN_EPS(p)	(((p)->hwparams3 &		\
 | 
					
						
							|  |  |  | 			(DWC3_NUM_IN_EPS_MASK)) >> 18) | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-01-18 18:04:09 +02:00
										 |  |  | /* HWPARAMS7 */ | 
					
						
							|  |  |  | #define DWC3_RAM1_DEPTH(n)	((n) & 0xffff)
 | 
					
						
							| 
									
										
										
										
											2011-10-12 10:31:04 +03:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-11-25 12:03:46 +01:00
										 |  |  | struct dwc3_request { | 
					
						
							|  |  |  | 	struct usb_request	request; | 
					
						
							|  |  |  | 	struct list_head	list; | 
					
						
							|  |  |  | 	struct dwc3_ep		*dep; | 
					
						
							| 
									
										
										
										
											2013-01-14 15:59:37 +05:30
										 |  |  | 	u32			start_slot; | 
					
						
							| 
									
										
										
										
											2011-11-25 12:03:46 +01:00
										 |  |  | 
 | 
					
						
							|  |  |  | 	u8			epnum; | 
					
						
							| 
									
										
										
										
											2012-02-06 11:04:53 +02:00
										 |  |  | 	struct dwc3_trb		*trb; | 
					
						
							| 
									
										
										
										
											2011-11-25 12:03:46 +01:00
										 |  |  | 	dma_addr_t		trb_dma; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	unsigned		direction:1; | 
					
						
							|  |  |  | 	unsigned		mapped:1; | 
					
						
							|  |  |  | 	unsigned		queued:1; | 
					
						
							|  |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:58 -08:00
										 |  |  | /*
 | 
					
						
							|  |  |  |  * struct dwc3_scratchpad_array - hibernation scratchpad array | 
					
						
							|  |  |  |  * (format defined by hw) | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | struct dwc3_scratchpad_array { | 
					
						
							|  |  |  | 	__le64	dma_adr[DWC3_MAX_HIBER_SCRATCHBUFS]; | 
					
						
							|  |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | /**
 | 
					
						
							|  |  |  |  * struct dwc3 - representation of our controller | 
					
						
							| 
									
										
										
										
											2011-08-27 01:40:52 +03:00
										 |  |  |  * @ctrl_req: usb control request which is used for ep0 | 
					
						
							|  |  |  |  * @ep0_trb: trb which is used for the ctrl_req | 
					
						
							| 
									
										
										
										
											2011-08-27 22:07:53 +03:00
										 |  |  |  * @ep0_bounce: bounce buffer for ep0 | 
					
						
							| 
									
										
										
										
											2011-08-27 01:40:52 +03:00
										 |  |  |  * @setup_buf: used while precessing STD USB requests | 
					
						
							|  |  |  |  * @ctrl_req_addr: dma address of ctrl_req | 
					
						
							|  |  |  |  * @ep0_trb: dma address of ep0_trb | 
					
						
							|  |  |  |  * @ep0_usb_req: dummy req used while handling STD USB requests | 
					
						
							| 
									
										
										
										
											2011-08-27 22:07:53 +03:00
										 |  |  |  * @ep0_bounce_addr: dma address of ep0_bounce | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  |  * @lock: for synchronizing | 
					
						
							|  |  |  |  * @dev: pointer to our struct device | 
					
						
							| 
									
										
										
										
											2011-10-12 14:08:26 +03:00
										 |  |  |  * @xhci: pointer to our xHCI child | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  |  * @event_buffer_list: a list of event buffers | 
					
						
							|  |  |  |  * @gadget: device side representation of the peripheral controller | 
					
						
							|  |  |  |  * @gadget_driver: pointer to the gadget driver | 
					
						
							|  |  |  |  * @regs: base address for our registers | 
					
						
							|  |  |  |  * @regs_size: address space size | 
					
						
							| 
									
										
										
										
											2011-10-12 10:31:04 +03:00
										 |  |  |  * @num_event_buffers: calculated number of event buffers | 
					
						
							| 
									
										
										
										
											2011-10-14 13:00:30 +03:00
										 |  |  |  * @u1u2: only used on revisions <1.83a for workaround | 
					
						
							| 
									
										
										
										
											2011-10-07 22:55:04 +03:00
										 |  |  |  * @maximum_speed: maximum speed requested (mainly for testing purposes) | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  |  * @revision: revision register contents | 
					
						
							| 
									
										
										
										
											2013-07-06 07:52:49 -05:00
										 |  |  |  * @dr_mode: requested mode of operation | 
					
						
							| 
									
										
										
										
											2012-07-19 14:09:48 +03:00
										 |  |  |  * @usb2_phy: pointer to USB2 PHY | 
					
						
							|  |  |  |  * @usb3_phy: pointer to USB3 PHY | 
					
						
							| 
									
										
										
										
											2012-04-30 14:56:33 +03:00
										 |  |  |  * @dcfg: saved contents of DCFG register | 
					
						
							|  |  |  |  * @gctl: saved contents of GCTL register | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  |  * @is_selfpowered: true when we are selfpowered | 
					
						
							|  |  |  |  * @three_stage_setup: set if we perform a three phase setup | 
					
						
							| 
									
										
										
										
											2011-08-27 22:07:53 +03:00
										 |  |  |  * @ep0_bounced: true when we used bounce buffer | 
					
						
							| 
									
										
										
										
											2011-09-08 18:27:33 +03:00
										 |  |  |  * @ep0_expect_in: true when we expect a DATA IN transfer | 
					
						
							| 
									
										
										
										
											2011-09-30 10:58:42 +03:00
										 |  |  |  * @start_config_issued: true when StartConfig command has been issued | 
					
						
							| 
									
										
										
										
											2011-10-14 15:11:49 +03:00
										 |  |  |  * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround | 
					
						
							| 
									
										
										
										
											2012-01-18 18:04:09 +02:00
										 |  |  |  * @needs_fifo_resize: not all users might want fifo resizing, flag it | 
					
						
							|  |  |  |  * @resize_fifos: tells us it's ok to reconfigure our TxFIFO sizes. | 
					
						
							| 
									
										
										
										
											2012-04-25 10:45:05 +03:00
										 |  |  |  * @isoch_delay: wValue from Set Isochronous Delay request; | 
					
						
							| 
									
										
										
										
											2012-04-24 16:19:49 +03:00
										 |  |  |  * @u2sel: parameter from Set SEL request. | 
					
						
							|  |  |  |  * @u2pel: parameter from Set SEL request. | 
					
						
							|  |  |  |  * @u1sel: parameter from Set SEL request. | 
					
						
							|  |  |  |  * @u1pel: parameter from Set SEL request. | 
					
						
							| 
									
										
										
										
											2011-05-05 15:53:10 +03:00
										 |  |  |  * @num_out_eps: number of out endpoints | 
					
						
							|  |  |  |  * @num_in_eps: number of in endpoints | 
					
						
							| 
									
										
										
										
											2011-08-30 15:50:40 +03:00
										 |  |  |  * @ep0_next_event: hold the next expected event | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  |  * @ep0state: state of endpoint zero | 
					
						
							|  |  |  |  * @link_state: link state | 
					
						
							|  |  |  |  * @speed: device speed (super, high, full, low) | 
					
						
							|  |  |  |  * @mem: points to start of memory which is used for this struct. | 
					
						
							| 
									
										
										
										
											2011-09-30 10:58:48 +03:00
										 |  |  |  * @hwparams: copy of hwparams registers | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  |  * @root: debugfs root folder pointer | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | struct dwc3 { | 
					
						
							|  |  |  | 	struct usb_ctrlrequest	*ctrl_req; | 
					
						
							| 
									
										
										
										
											2012-02-06 11:04:53 +02:00
										 |  |  | 	struct dwc3_trb		*ep0_trb; | 
					
						
							| 
									
										
										
										
											2011-08-27 22:07:53 +03:00
										 |  |  | 	void			*ep0_bounce; | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 	u8			*setup_buf; | 
					
						
							|  |  |  | 	dma_addr_t		ctrl_req_addr; | 
					
						
							|  |  |  | 	dma_addr_t		ep0_trb_addr; | 
					
						
							| 
									
										
										
										
											2011-08-27 22:07:53 +03:00
										 |  |  | 	dma_addr_t		ep0_bounce_addr; | 
					
						
							| 
									
										
										
										
											2011-11-25 12:03:46 +01:00
										 |  |  | 	struct dwc3_request	ep0_usb_req; | 
					
						
							| 
									
										
										
										
											2011-05-05 15:53:10 +03:00
										 |  |  | 
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 	/* device lock */ | 
					
						
							|  |  |  | 	spinlock_t		lock; | 
					
						
							| 
									
										
										
										
											2011-05-05 15:53:10 +03:00
										 |  |  | 
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 	struct device		*dev; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-10-12 14:08:26 +03:00
										 |  |  | 	struct platform_device	*xhci; | 
					
						
							| 
									
										
										
										
											2012-04-24 14:18:39 +03:00
										 |  |  | 	struct resource		xhci_resources[DWC3_XHCI_RESOURCES_NUM]; | 
					
						
							| 
									
										
										
										
											2011-10-12 14:08:26 +03:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-10-24 12:03:13 +03:00
										 |  |  | 	struct dwc3_event_buffer **ev_buffs; | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 	struct dwc3_ep		*eps[DWC3_ENDPOINTS_NUM]; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	struct usb_gadget	gadget; | 
					
						
							|  |  |  | 	struct usb_gadget_driver *gadget_driver; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-07-19 14:09:48 +03:00
										 |  |  | 	struct usb_phy		*usb2_phy; | 
					
						
							|  |  |  | 	struct usb_phy		*usb3_phy; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 	void __iomem		*regs; | 
					
						
							|  |  |  | 	size_t			regs_size; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2013-07-06 07:52:49 -05:00
										 |  |  | 	enum usb_dr_mode	dr_mode; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-04-30 14:56:33 +03:00
										 |  |  | 	/* used for suspend/resume */ | 
					
						
							|  |  |  | 	u32			dcfg; | 
					
						
							|  |  |  | 	u32			gctl; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-10-12 10:31:04 +03:00
										 |  |  | 	u32			num_event_buffers; | 
					
						
							| 
									
										
										
										
											2011-10-14 13:00:30 +03:00
										 |  |  | 	u32			u1u2; | 
					
						
							| 
									
										
										
										
											2011-10-07 22:55:04 +03:00
										 |  |  | 	u32			maximum_speed; | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 	u32			revision; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_REVISION_173A	0x5533173a
 | 
					
						
							|  |  |  | #define DWC3_REVISION_175A	0x5533175a
 | 
					
						
							|  |  |  | #define DWC3_REVISION_180A	0x5533180a
 | 
					
						
							|  |  |  | #define DWC3_REVISION_183A	0x5533183a
 | 
					
						
							|  |  |  | #define DWC3_REVISION_185A	0x5533185a
 | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:58 -08:00
										 |  |  | #define DWC3_REVISION_187A	0x5533187a
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | #define DWC3_REVISION_188A	0x5533188a
 | 
					
						
							|  |  |  | #define DWC3_REVISION_190A	0x5533190a
 | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:58 -08:00
										 |  |  | #define DWC3_REVISION_194A	0x5533194a
 | 
					
						
							| 
									
										
										
										
											2012-03-23 12:10:48 +02:00
										 |  |  | #define DWC3_REVISION_200A	0x5533200a
 | 
					
						
							|  |  |  | #define DWC3_REVISION_202A	0x5533202a
 | 
					
						
							|  |  |  | #define DWC3_REVISION_210A	0x5533210a
 | 
					
						
							|  |  |  | #define DWC3_REVISION_220A	0x5533220a
 | 
					
						
							| 
									
										
										
										
											2012-09-18 21:22:32 +03:00
										 |  |  | #define DWC3_REVISION_230A	0x5533230a
 | 
					
						
							|  |  |  | #define DWC3_REVISION_240A	0x5533240a
 | 
					
						
							|  |  |  | #define DWC3_REVISION_250A	0x5533250a
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 
 | 
					
						
							|  |  |  | 	unsigned		is_selfpowered:1; | 
					
						
							|  |  |  | 	unsigned		three_stage_setup:1; | 
					
						
							| 
									
										
										
										
											2011-08-27 22:07:53 +03:00
										 |  |  | 	unsigned		ep0_bounced:1; | 
					
						
							| 
									
										
										
										
											2011-09-08 18:27:33 +03:00
										 |  |  | 	unsigned		ep0_expect_in:1; | 
					
						
							| 
									
										
										
										
											2011-09-30 10:58:42 +03:00
										 |  |  | 	unsigned		start_config_issued:1; | 
					
						
							| 
									
										
										
										
											2011-10-14 15:11:49 +03:00
										 |  |  | 	unsigned		setup_packet_pending:1; | 
					
						
							| 
									
										
										
										
											2011-11-02 13:30:45 +01:00
										 |  |  | 	unsigned		delayed_status:1; | 
					
						
							| 
									
										
										
										
											2012-01-18 18:04:09 +02:00
										 |  |  | 	unsigned		needs_fifo_resize:1; | 
					
						
							|  |  |  | 	unsigned		resize_fifos:1; | 
					
						
							| 
									
										
										
										
											2013-02-08 17:55:58 +02:00
										 |  |  | 	unsigned		pullups_connected:1; | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-08-30 15:50:40 +03:00
										 |  |  | 	enum dwc3_ep0_next	ep0_next_event; | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 	enum dwc3_ep0_state	ep0state; | 
					
						
							|  |  |  | 	enum dwc3_link_state	link_state; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-04-25 10:45:05 +03:00
										 |  |  | 	u16			isoch_delay; | 
					
						
							| 
									
										
										
										
											2012-04-24 16:19:49 +03:00
										 |  |  | 	u16			u2sel; | 
					
						
							|  |  |  | 	u16			u2pel; | 
					
						
							|  |  |  | 	u8			u1sel; | 
					
						
							|  |  |  | 	u8			u1pel; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 	u8			speed; | 
					
						
							| 
									
										
										
										
											2012-04-24 16:19:49 +03:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-05-05 15:53:10 +03:00
										 |  |  | 	u8			num_out_eps; | 
					
						
							|  |  |  | 	u8			num_in_eps; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 	void			*mem; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-09-30 10:58:48 +03:00
										 |  |  | 	struct dwc3_hwparams	hwparams; | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 	struct dentry		*root; | 
					
						
							| 
									
										
										
										
											2013-01-18 10:21:34 +02:00
										 |  |  | 	struct debugfs_regset32	*regset; | 
					
						
							| 
									
										
										
										
											2012-02-10 12:21:18 +02:00
										 |  |  | 
 | 
					
						
							|  |  |  | 	u8			test_mode; | 
					
						
							|  |  |  | 	u8			test_mode_nr; | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* -------------------------------------------------------------------------- */ | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* -------------------------------------------------------------------------- */ | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | struct dwc3_event_type { | 
					
						
							|  |  |  | 	u32	is_devspec:1; | 
					
						
							| 
									
										
										
										
											2013-06-27 01:08:11 +08:00
										 |  |  | 	u32	type:7; | 
					
						
							|  |  |  | 	u32	reserved8_31:24; | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | } __packed; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_DEPEVT_XFERCOMPLETE	0x01
 | 
					
						
							|  |  |  | #define DWC3_DEPEVT_XFERINPROGRESS	0x02
 | 
					
						
							|  |  |  | #define DWC3_DEPEVT_XFERNOTREADY	0x03
 | 
					
						
							|  |  |  | #define DWC3_DEPEVT_RXTXFIFOEVT		0x04
 | 
					
						
							|  |  |  | #define DWC3_DEPEVT_STREAMEVT		0x06
 | 
					
						
							|  |  |  | #define DWC3_DEPEVT_EPCMDCMPLT		0x07
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /**
 | 
					
						
							|  |  |  |  * struct dwc3_event_depvt - Device Endpoint Events | 
					
						
							|  |  |  |  * @one_bit: indicates this is an endpoint event (not used) | 
					
						
							|  |  |  |  * @endpoint_number: number of the endpoint | 
					
						
							|  |  |  |  * @endpoint_event: The event we have: | 
					
						
							|  |  |  |  *	0x00	- Reserved | 
					
						
							|  |  |  |  *	0x01	- XferComplete | 
					
						
							|  |  |  |  *	0x02	- XferInProgress | 
					
						
							|  |  |  |  *	0x03	- XferNotReady | 
					
						
							|  |  |  |  *	0x04	- RxTxFifoEvt (IN->Underrun, OUT->Overrun) | 
					
						
							|  |  |  |  *	0x05	- Reserved | 
					
						
							|  |  |  |  *	0x06	- StreamEvt | 
					
						
							|  |  |  |  *	0x07	- EPCmdCmplt | 
					
						
							|  |  |  |  * @reserved11_10: Reserved, don't use. | 
					
						
							|  |  |  |  * @status: Indicates the status of the event. Refer to databook for | 
					
						
							|  |  |  |  *	more information. | 
					
						
							|  |  |  |  * @parameters: Parameters of the current event. Refer to databook for | 
					
						
							|  |  |  |  *	more information. | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | struct dwc3_event_depevt { | 
					
						
							|  |  |  | 	u32	one_bit:1; | 
					
						
							|  |  |  | 	u32	endpoint_number:5; | 
					
						
							|  |  |  | 	u32	endpoint_event:4; | 
					
						
							|  |  |  | 	u32	reserved11_10:2; | 
					
						
							|  |  |  | 	u32	status:4; | 
					
						
							| 
									
										
										
										
											2012-01-18 17:06:03 +02:00
										 |  |  | 
 | 
					
						
							|  |  |  | /* Within XferNotReady */ | 
					
						
							|  |  |  | #define DEPEVT_STATUS_TRANSFER_ACTIVE	(1 << 3)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* Within XferComplete */ | 
					
						
							| 
									
										
										
										
											2012-02-15 18:56:56 -08:00
										 |  |  | #define DEPEVT_STATUS_BUSERR	(1 << 0)
 | 
					
						
							|  |  |  | #define DEPEVT_STATUS_SHORT	(1 << 1)
 | 
					
						
							|  |  |  | #define DEPEVT_STATUS_IOC	(1 << 2)
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | #define DEPEVT_STATUS_LST	(1 << 3)
 | 
					
						
							| 
									
										
										
										
											2011-08-27 22:04:32 +03:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-09-30 10:58:47 +03:00
										 |  |  | /* Stream event only */ | 
					
						
							|  |  |  | #define DEPEVT_STREAMEVT_FOUND		1
 | 
					
						
							|  |  |  | #define DEPEVT_STREAMEVT_NOTFOUND	2
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-08-27 22:04:32 +03:00
										 |  |  | /* Control-only Status */ | 
					
						
							|  |  |  | #define DEPEVT_STATUS_CONTROL_DATA	1
 | 
					
						
							|  |  |  | #define DEPEVT_STATUS_CONTROL_STATUS	2
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | 	u32	parameters:16; | 
					
						
							|  |  |  | } __packed; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /**
 | 
					
						
							|  |  |  |  * struct dwc3_event_devt - Device Events | 
					
						
							|  |  |  |  * @one_bit: indicates this is a non-endpoint event (not used) | 
					
						
							|  |  |  |  * @device_event: indicates it's a device event. Should read as 0x00 | 
					
						
							|  |  |  |  * @type: indicates the type of device event. | 
					
						
							|  |  |  |  *	0	- DisconnEvt | 
					
						
							|  |  |  |  *	1	- USBRst | 
					
						
							|  |  |  |  *	2	- ConnectDone | 
					
						
							|  |  |  |  *	3	- ULStChng | 
					
						
							|  |  |  |  *	4	- WkUpEvt | 
					
						
							|  |  |  |  *	5	- Reserved | 
					
						
							|  |  |  |  *	6	- EOPF | 
					
						
							|  |  |  |  *	7	- SOF | 
					
						
							|  |  |  |  *	8	- Reserved | 
					
						
							|  |  |  |  *	9	- ErrticErr | 
					
						
							|  |  |  |  *	10	- CmdCmplt | 
					
						
							|  |  |  |  *	11	- EvntOverflow | 
					
						
							|  |  |  |  *	12	- VndrDevTstRcved | 
					
						
							|  |  |  |  * @reserved15_12: Reserved, not used | 
					
						
							|  |  |  |  * @event_info: Information about this event | 
					
						
							|  |  |  |  * @reserved31_24: Reserved, not used | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | struct dwc3_event_devt { | 
					
						
							|  |  |  | 	u32	one_bit:1; | 
					
						
							|  |  |  | 	u32	device_event:7; | 
					
						
							|  |  |  | 	u32	type:4; | 
					
						
							|  |  |  | 	u32	reserved15_12:4; | 
					
						
							|  |  |  | 	u32	event_info:8; | 
					
						
							|  |  |  | 	u32	reserved31_24:8; | 
					
						
							|  |  |  | } __packed; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /**
 | 
					
						
							|  |  |  |  * struct dwc3_event_gevt - Other Core Events | 
					
						
							|  |  |  |  * @one_bit: indicates this is a non-endpoint event (not used) | 
					
						
							|  |  |  |  * @device_event: indicates it's (0x03) Carkit or (0x04) I2C event. | 
					
						
							|  |  |  |  * @phy_port_number: self-explanatory | 
					
						
							|  |  |  |  * @reserved31_12: Reserved, not used. | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | struct dwc3_event_gevt { | 
					
						
							|  |  |  | 	u32	one_bit:1; | 
					
						
							|  |  |  | 	u32	device_event:7; | 
					
						
							|  |  |  | 	u32	phy_port_number:4; | 
					
						
							|  |  |  | 	u32	reserved31_12:20; | 
					
						
							|  |  |  | } __packed; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /**
 | 
					
						
							|  |  |  |  * union dwc3_event - representation of Event Buffer contents | 
					
						
							|  |  |  |  * @raw: raw 32-bit event | 
					
						
							|  |  |  |  * @type: the type of the event | 
					
						
							|  |  |  |  * @depevt: Device Endpoint Event | 
					
						
							|  |  |  |  * @devt: Device Event | 
					
						
							|  |  |  |  * @gevt: Global Event | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | union dwc3_event { | 
					
						
							|  |  |  | 	u32				raw; | 
					
						
							|  |  |  | 	struct dwc3_event_type		type; | 
					
						
							|  |  |  | 	struct dwc3_event_depevt	depevt; | 
					
						
							|  |  |  | 	struct dwc3_event_devt		devt; | 
					
						
							|  |  |  | 	struct dwc3_event_gevt		gevt; | 
					
						
							|  |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /*
 | 
					
						
							|  |  |  |  * DWC3 Features to be used as Driver Data | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DWC3_HAS_PERIPHERAL		BIT(0)
 | 
					
						
							|  |  |  | #define DWC3_HAS_XHCI			BIT(1)
 | 
					
						
							|  |  |  | #define DWC3_HAS_OTG			BIT(3)
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-10-12 14:08:26 +03:00
										 |  |  | /* prototypes */ | 
					
						
							| 
									
										
										
										
											2011-10-31 22:25:40 +01:00
										 |  |  | void dwc3_set_mode(struct dwc3 *dwc, u32 mode); | 
					
						
							| 
									
										
										
										
											2012-01-18 18:04:09 +02:00
										 |  |  | int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc); | 
					
						
							| 
									
										
										
										
											2011-10-31 22:25:40 +01:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2013-01-15 16:09:21 +05:30
										 |  |  | #if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
 | 
					
						
							| 
									
										
										
										
											2011-10-12 14:08:26 +03:00
										 |  |  | int dwc3_host_init(struct dwc3 *dwc); | 
					
						
							|  |  |  | void dwc3_host_exit(struct dwc3 *dwc); | 
					
						
							| 
									
										
										
										
											2013-01-15 16:09:21 +05:30
										 |  |  | #else
 | 
					
						
							|  |  |  | static inline int dwc3_host_init(struct dwc3 *dwc) | 
					
						
							|  |  |  | { return 0; } | 
					
						
							|  |  |  | static inline void dwc3_host_exit(struct dwc3 *dwc) | 
					
						
							|  |  |  | { } | 
					
						
							|  |  |  | #endif
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #if IS_ENABLED(CONFIG_USB_DWC3_GADGET) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
 | 
					
						
							| 
									
										
										
										
											2011-10-12 14:15:49 +03:00
										 |  |  | int dwc3_gadget_init(struct dwc3 *dwc); | 
					
						
							|  |  |  | void dwc3_gadget_exit(struct dwc3 *dwc); | 
					
						
							| 
									
										
										
										
											2013-01-15 16:09:21 +05:30
										 |  |  | #else
 | 
					
						
							|  |  |  | static inline int dwc3_gadget_init(struct dwc3 *dwc) | 
					
						
							|  |  |  | { return 0; } | 
					
						
							|  |  |  | static inline void dwc3_gadget_exit(struct dwc3 *dwc) | 
					
						
							|  |  |  | { } | 
					
						
							|  |  |  | #endif
 | 
					
						
							| 
									
										
										
										
											2011-10-12 14:15:49 +03:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-04-30 14:56:33 +03:00
										 |  |  | /* power management interface */ | 
					
						
							|  |  |  | #if !IS_ENABLED(CONFIG_USB_DWC3_HOST)
 | 
					
						
							|  |  |  | int dwc3_gadget_prepare(struct dwc3 *dwc); | 
					
						
							|  |  |  | void dwc3_gadget_complete(struct dwc3 *dwc); | 
					
						
							|  |  |  | int dwc3_gadget_suspend(struct dwc3 *dwc); | 
					
						
							|  |  |  | int dwc3_gadget_resume(struct dwc3 *dwc); | 
					
						
							|  |  |  | #else
 | 
					
						
							|  |  |  | static inline int dwc3_gadget_prepare(struct dwc3 *dwc) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	return 0; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static inline void dwc3_gadget_complete(struct dwc3 *dwc) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static inline int dwc3_gadget_suspend(struct dwc3 *dwc) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	return 0; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static inline int dwc3_gadget_resume(struct dwc3 *dwc) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	return 0; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | #endif /* !IS_ENABLED(CONFIG_USB_DWC3_HOST) */
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
											  
											
												usb: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
											
										 
											2011-08-19 18:10:58 +03:00
										 |  |  | #endif /* __DRIVERS_USB_DWC3_CORE_H */
 |