forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
linux-pinenote/drivers/net/wireless/orinoco/orinoco_cs.c

342 lines
14 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* orinoco_cs.c (formerly known as dldwd_cs.c)
*
* A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
* as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
* EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others).
* It should also be usable on various Prism II based cards such as the
* Linksys, D-Link and Farallon Skyline. It should also work on Symbol
* cards such as the 3Com AirConnect and Ericsson WLAN.
orinoco: checkpatch cleanup Fix errors and obvious warnings reported by checkpatch in all files except orinoco.c. Orinoco.c is part of different patch series of Dave. Signed-off-by: Andrey Borzenkov <arvidjaar@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-25 23:08:43 +03:00
*
orinoco: Rename orinoco.c So that we can split up the file and still produce a module named orinoco.o. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-04 23:05:48 +00:00
* Copyright notice & release notes in file main.c
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
*/
#define DRIVER_NAME "orinoco_cs"
#define PFX DRIVER_NAME ": "
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
[PATCH] orinoco: Remove inneeded system includes. Signed-off-by: Pavel Roskin <proski@gnu.org> Remove inneeded system includes. Most system includes are not needed. In particular, the hardware backends don't need anything network related. Some includes have been moved from local headers to the C files where they are actually used. Includes that have to be in the local headers are no longer from the C sources. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-23 04:18:07 -04:00
#include <linux/delay.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
#include "orinoco.h"
/********************************************************************/
/* Module stuff */
/********************************************************************/
MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>");
orinoco: checkpatch cleanup Fix errors and obvious warnings reported by checkpatch in all files except orinoco.c. Orinoco.c is part of different patch series of Dave. Signed-off-by: Andrey Borzenkov <arvidjaar@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-25 23:08:43 +03:00
MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco,"
" Prism II based and similar wireless cards");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
MODULE_LICENSE("Dual MPL/GPL");
/* Module parameters */
/* Some D-Link cards have buggy CIS. They do work at 5v properly, but
* don't have any CIS entry for it. This workaround it... */
static int ignore_cis_vcc; /* = 0 */
module_param(ignore_cis_vcc, int, 0);
MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
/********************************************************************/
/* Data structures */
/********************************************************************/
/* PCMCIA specific device information (goes in the card field of
* struct orinoco_private */
struct orinoco_pccard {
[PATCH] pcmcia: embed dev_link_t into struct pcmcia_device Embed dev_link_t into struct pcmcia_device(), as they basically address the same entity. The actual contents of dev_link_t will be cleaned up step by step. This patch includes a bugfix from and signed-off-by Andrew Morton. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-05 10:45:09 +01:00
struct pcmcia_device *p_dev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* Used to handle hard reset */
/* yuck, we need this hack to work around the insanity of the
orinoco: checkpatch cleanup Fix errors and obvious warnings reported by checkpatch in all files except orinoco.c. Orinoco.c is part of different patch series of Dave. Signed-off-by: Andrey Borzenkov <arvidjaar@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-25 23:08:43 +03:00
* PCMCIA layer */
unsigned long hard_reset_in_progress;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
};
/********************************************************************/
/* Function prototypes */
/********************************************************************/
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:26:06 +02:00
static int orinoco_cs_config(struct pcmcia_device *link);
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:21:06 +02:00
static void orinoco_cs_release(struct pcmcia_device *link);
[PATCH] pcmcia: unify detach, REMOVAL_EVENT handlers into one remove callback Unify the "detach" and REMOVAL_EVENT handlers to one "remove" function. Old functionality is preserved, for the moment. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-14 21:23:14 +01:00
static void orinoco_cs_detach(struct pcmcia_device *p_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/********************************************************************/
orinoco: minor fixes for problems found by checkpatch.pl Eliminate spaces before tabs. Eliminate typedefs. Add spaces around operators. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13 11:19:57 -04:00
/* Device methods */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/********************************************************************/
static int
orinoco_cs_hard_reset(struct orinoco_private *priv)
{
struct orinoco_pccard *card = priv->card;
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:21:06 +02:00
struct pcmcia_device *link = card->p_dev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
int err;
/* We need atomic ops here, because we're not holding the lock */
set_bit(0, &card->hard_reset_in_progress);
pcmcia: card services header cleanup 16-bit PCMCIA device handling function definitions are moved to ds.h, internal definitions to cs_internal.h. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-31 15:20:26 +02:00
err = pcmcia_reset_card(link->socket);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (err)
return err;
msleep(100);
clear_bit(0, &card->hard_reset_in_progress);
return 0;
}
/********************************************************************/
orinoco: minor fixes for problems found by checkpatch.pl Eliminate spaces before tabs. Eliminate typedefs. Add spaces around operators. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13 11:19:57 -04:00
/* PCMCIA stuff */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/********************************************************************/
[PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe callback Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified probe() callback. As all in-kernel drivers are changed to this new callback, there will be no temporary backwards-compatibility. Inside a probe() function, each driver _must_ set struct pcmcia_device *p_dev->instance and instance->handle correctly. With these patches, the basic driver interface for 16-bit PCMCIA drivers now has the classic four callbacks known also from other buses: int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); int (*suspend) (struct pcmcia_device *dev); int (*resume) (struct pcmcia_device *dev); Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-14 21:25:51 +01:00
static int
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:26:06 +02:00
orinoco_cs_probe(struct pcmcia_device *link)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
struct orinoco_private *priv;
struct orinoco_pccard *card;
pcmcia: remove deprecated handle_to_dev() macro Update remaining users and remove deprecated handle_to_dev() macro CC: Harald Welte <laforge@gnumonks.org> CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-03 10:27:34 +01:00
priv = alloc_orinocodev(sizeof(*card), &link->dev,
orinoco: Replace net_device with orinoco_private in driver interfaces Move away from using net_device as the main structure in orinoco function calls. Use orinoco_private instead. This makes more sense when we move to cfg80211, and we get wiphys as well. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-18 23:21:23 +01:00
orinoco_cs_hard_reset, NULL);
if (!priv)
[PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe callback Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified probe() callback. As all in-kernel drivers are changed to this new callback, there will be no temporary backwards-compatibility. Inside a probe() function, each driver _must_ set struct pcmcia_device *p_dev->instance and instance->handle correctly. With these patches, the basic driver interface for 16-bit PCMCIA drivers now has the classic four callbacks known also from other buses: int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); int (*suspend) (struct pcmcia_device *dev); int (*resume) (struct pcmcia_device *dev); Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-14 21:25:51 +01:00
return -ENOMEM;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
card = priv->card;
/* Link both structures together */
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:21:06 +02:00
card->p_dev = link;
orinoco: Replace net_device with orinoco_private in driver interfaces Move away from using net_device as the main structure in orinoco function calls. Use orinoco_private instead. This makes more sense when we move to cfg80211, and we get wiphys as well. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-18 23:21:23 +01:00
link->priv = priv;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:26:06 +02:00
return orinoco_cs_config(link);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
} /* orinoco_cs_attach */
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:21:06 +02:00
static void orinoco_cs_detach(struct pcmcia_device *link)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
orinoco: Replace net_device with orinoco_private in driver interfaces Move away from using net_device as the main structure in orinoco function calls. Use orinoco_private instead. This makes more sense when we move to cfg80211, and we get wiphys as well. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-18 23:21:23 +01:00
struct orinoco_private *priv = link->priv;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
pcmcia: dev_node removal (drivers with unregister_netdev check) As a third step, remove any usage of dev_node_t from drivers which only wrote to this typedef/struct, except to determine whether register_netdev() succeeded previously. However, the function calling unregister_netdev() was only ever called by the PCMCIA core if register_netdev() succeeded previously. The lonely exception was easily fixed. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-20 19:39:26 +01:00
orinoco_if_del(priv);
[PATCH] orinoco: unregister network device before releasing PCMCIA resources Hardware resources should not be made available to other devices while the network device is still registered. Also remove the related debug statements. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-01 02:13:24 -04:00
[PATCH] pcmcia: use bitfield instead of p_state and state Instead of the two status values struct pcmcia_device->p_state and state, use descriptive bitfields. Most value-checking in drivers was invalid, as the core now only calls the ->remove() (a.k.a. detach) function in case the attachement _and_ configuration was successful. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-02 00:09:29 +01:00
orinoco_cs_release(link);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
orinoco: Replace net_device with orinoco_private in driver interfaces Move away from using net_device as the main structure in orinoco function calls. Use orinoco_private instead. This makes more sense when we move to cfg80211, and we get wiphys as well. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-18 23:21:23 +01:00
free_orinocodev(priv);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
} /* orinoco_cs_detach */
pcmcia: use autoconfiguration feature for ioports and iomem When CONF_AUTO_SET_IO or CONF_AUTO_SET_IOMEM are set, the corresponding fields in struct pcmcia_device *p_dev->resource[0,1,2] are set accordinly. Drivers wishing to override certain settings may do so in the callback function, but they no longer need to parse the CIS entries stored in cistpl_cftable_entry_t themselves. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: linux-bluetooth@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-30 13:13:46 +02:00
static int orinoco_cs_config_check(struct pcmcia_device *p_dev, void *priv_data)
pcmcia: use pcmcia_loop_config in net pcmcia drivers Use the config loop helper in (some) net pcmcia drivers. CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-02 14:28:43 +02:00
{
pcmcia: use autoconfiguration feature for ioports and iomem When CONF_AUTO_SET_IO or CONF_AUTO_SET_IOMEM are set, the corresponding fields in struct pcmcia_device *p_dev->resource[0,1,2] are set accordinly. Drivers wishing to override certain settings may do so in the callback function, but they no longer need to parse the CIS entries stored in cistpl_cftable_entry_t themselves. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: linux-bluetooth@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-30 13:13:46 +02:00
if (p_dev->config_index == 0)
return -EINVAL;
pcmcia: use pcmcia_loop_config in net pcmcia drivers Use the config loop helper in (some) net pcmcia drivers. CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-02 14:28:43 +02:00
pcmcia: use autoconfiguration feature for ioports and iomem When CONF_AUTO_SET_IO or CONF_AUTO_SET_IOMEM are set, the corresponding fields in struct pcmcia_device *p_dev->resource[0,1,2] are set accordinly. Drivers wishing to override certain settings may do so in the callback function, but they no longer need to parse the CIS entries stored in cistpl_cftable_entry_t themselves. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: linux-bluetooth@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-30 13:13:46 +02:00
return pcmcia_request_io(p_dev);
pcmcia: use pcmcia_loop_config in net pcmcia drivers Use the config loop helper in (some) net pcmcia drivers. CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-02 14:28:43 +02:00
};
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:26:06 +02:00
static int
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:21:06 +02:00
orinoco_cs_config(struct pcmcia_device *link)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
orinoco: Replace net_device with orinoco_private in driver interfaces Move away from using net_device as the main structure in orinoco function calls. Use orinoco_private instead. This makes more sense when we move to cfg80211, and we get wiphys as well. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-18 23:21:23 +01:00
struct orinoco_private *priv = link->priv;
orinoco: minor fixes for problems found by checkpatch.pl Eliminate spaces before tabs. Eliminate typedefs. Add spaces around operators. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13 11:19:57 -04:00
struct hermes *hw = &priv->hw;
pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (wireless) Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of requiring manual settings of PCMCIA_DEBUG. Also, remove all usages of the CS_CHECK macro and replace them with proper Linux style calling and return value checking. The extra error reporting may be dropped, as the PCMCIA core already complains about any (non-driver-author) errors. CC: linux-wireless@vger.kernel.org CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-24 15:53:36 +02:00
int ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
void __iomem *mem;
pcmcia: use autoconfiguration feature for ioports and iomem When CONF_AUTO_SET_IO or CONF_AUTO_SET_IOMEM are set, the corresponding fields in struct pcmcia_device *p_dev->resource[0,1,2] are set accordinly. Drivers wishing to override certain settings may do so in the callback function, but they no longer need to parse the CIS entries stored in cistpl_cftable_entry_t themselves. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: linux-bluetooth@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-30 13:13:46 +02:00
link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC |
CONF_AUTO_SET_IO | CONF_ENABLE_IRQ;
pcmcia: introduce autoconfiguration feature Introduce an autoconfiguration feature to set certain values in pcmcia_loop_config(), instead of copying the same code over and over in each PCMCIA driver. At first, introduce the following options: CONF_AUTO_CHECK_VCC check or matching Vcc entry CONF_AUTO_SET_VPP set Vpp CONF_AUTO_AUDIO enable the speaker line CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-30 09:51:52 +02:00
if (ignore_cis_vcc)
link->config_flags &= ~CONF_AUTO_CHECK_VCC;
pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (wireless) Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of requiring manual settings of PCMCIA_DEBUG. Also, remove all usages of the CS_CHECK macro and replace them with proper Linux style calling and return value checking. The extra error reporting may be dropped, as the PCMCIA core already complains about any (non-driver-author) errors. CC: linux-wireless@vger.kernel.org CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-24 15:53:36 +02:00
ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
if (ret) {
pcmcia: use pcmcia_loop_config in net pcmcia drivers Use the config loop helper in (some) net pcmcia drivers. CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-02 14:28:43 +02:00
if (!ignore_cis_vcc)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
printk(KERN_ERR PFX "GetNextTuple(): No matching "
"CIS configuration. Maybe you need the "
"ignore_cis_vcc=1 parameter.\n");
pcmcia: use pcmcia_loop_config in net pcmcia drivers Use the config loop helper in (some) net pcmcia drivers. CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-02 14:28:43 +02:00
goto failed;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
pcmcia: do not use io_req_t after call to pcmcia_request_io() After pcmcia_request_io(), do not make use of the values stored in io_req_t, but instead use those found in struct pcmcia_device->resource[]. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/) Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-24 15:58:54 +02:00
mem = ioport_map(link->resource[0]->start,
resource_size(link->resource[0]));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (!mem)
pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (wireless) Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of requiring manual settings of PCMCIA_DEBUG. Also, remove all usages of the CS_CHECK macro and replace them with proper Linux style calling and return value checking. The extra error reporting may be dropped, as the PCMCIA core already complains about any (non-driver-author) errors. CC: linux-wireless@vger.kernel.org CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-24 15:53:36 +02:00
goto failed;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
orinoco: initialise priv->hw before assigning the interrupt The interrupt handler takes a lock - but since commit bcad6e80f3f this lock goes through an indirection specified in the hermes_t structure. We must therefore initialise the structure before setting up the interrupt handler. Fix orinoco_cs and spectrum_cs <https://bugzilla.kernel.org/show_bug.cgi?id=23932> Bisected by: Matt Domsch <Matt_Domsch@dell.com> Signed-off by: David Kilroy <kilroyd@googlemail.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-07 18:50:42 +00:00
/* We initialize the hermes structure before completing PCMCIA
* configuration just in case the interrupt handler gets
* called. */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
orinoco: initialise priv->hw before assigning the interrupt The interrupt handler takes a lock - but since commit bcad6e80f3f this lock goes through an indirection specified in the hermes_t structure. We must therefore initialise the structure before setting up the interrupt handler. Fix orinoco_cs and spectrum_cs <https://bugzilla.kernel.org/show_bug.cgi?id=23932> Bisected by: Matt Domsch <Matt_Domsch@dell.com> Signed-off by: David Kilroy <kilroyd@googlemail.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-07 18:50:42 +00:00
ret = pcmcia_request_irq(link, orinoco_interrupt);
if (ret)
goto failed;
pcmcia: convert pcmcia_request_configuration to pcmcia_enable_device pcmcia_enable_device() now replaces pcmcia_request_configuration(). Instead of config_req_t, all necessary flags are either passed as a parameter to pcmcia_enable_device(), or (in rare circumstances) set in struct pcmcia_device -> flags. With the last remaining user of include/pcmcia/cs.h gone, remove all references. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-29 19:27:09 +02:00
ret = pcmcia_enable_device(link);
pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (wireless) Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of requiring manual settings of PCMCIA_DEBUG. Also, remove all usages of the CS_CHECK macro and replace them with proper Linux style calling and return value checking. The extra error reporting may be dropped, as the PCMCIA core already complains about any (non-driver-author) errors. CC: linux-wireless@vger.kernel.org CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-24 15:53:36 +02:00
if (ret)
goto failed;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
orinoco: initialise independently of netdev Initialise the orinoco driver before registerring with netdev, which will help when we get to cfg80211... Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-18 23:21:24 +01:00
/* Initialise the main driver */
if (orinoco_init(priv) != 0) {
printk(KERN_ERR PFX "orinoco_init() failed\n");
goto failed;
}
orinoco: move netdev interface creation to main driver With the move to cfg80211 it's nice to keep the hardware operations distinct from the interface, even though we can only support a single interface. This also means the driver resembles other cfg80211 drivers. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-18 23:21:28 +01:00
/* Register an interface with the stack */
pcmcia: do not use io_req_t after call to pcmcia_request_io() After pcmcia_request_io(), do not make use of the values stored in io_req_t, but instead use those found in struct pcmcia_device->resource[]. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/) Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-24 15:58:54 +02:00
if (orinoco_if_add(priv, link->resource[0]->start,
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits) qlcnic: adding co maintainer ixgbe: add support for active DA cables ixgbe: dcb, do not tag tc_prio_control frames ixgbe: fix ixgbe_tx_is_paused logic ixgbe: always enable vlan strip/insert when DCB is enabled ixgbe: remove some redundant code in setting FCoE FIP filter ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp ixgbe: fix header len when unsplit packet overflows to data buffer ipv6: Never schedule DAD timer on dead address ipv6: Use POSTDAD state ipv6: Use state_lock to protect ifa state ipv6: Replace inet6_ifaddr->dead with state cxgb4: notify upper drivers if the device is already up when they load cxgb4: keep interrupts available when the ports are brought down cxgb4: fix initial addition of MAC address cnic: Return SPQ credit to bnx2x after ring setup and shutdown. cnic: Convert cnic_local_flags to atomic ops. can: Fix SJA1000 command register writes on SMP systems bridge: fix build for CONFIG_SYSFS disabled ARCNET: Limit com20020 PCI ID matches for SOHARD cards ... Fix up various conflicts with pcmcia tree drivers/net/ {pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and wireless/orinoco/spectrum_cs.c} and feature removal (Documentation/feature-removal-schedule.txt). Also fix a non-content conflict due to pm_qos_requirement getting renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
2010-05-20 21:04:44 -07:00
link->irq, NULL) != 0) {
orinoco: move netdev interface creation to main driver With the move to cfg80211 it's nice to keep the hardware operations distinct from the interface, even though we can only support a single interface. This also means the driver resembles other cfg80211 drivers. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-18 23:21:28 +01:00
printk(KERN_ERR PFX "orinoco_if_add() failed\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
goto failed;
}
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:26:06 +02:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
failed:
orinoco_cs_release(link);
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:26:06 +02:00
return -ENODEV;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
} /* orinoco_cs_config */
static void
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:21:06 +02:00
orinoco_cs_release(struct pcmcia_device *link)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
orinoco: Replace net_device with orinoco_private in driver interfaces Move away from using net_device as the main structure in orinoco function calls. Use orinoco_private instead. This makes more sense when we move to cfg80211, and we get wiphys as well. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-18 23:21:23 +01:00
struct orinoco_private *priv = link->priv;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
unsigned long flags;
/* We're committed to taking the device away now, so mark the
* hardware as unavailable */
orinoco: encapsulate driver locking Local bus and USB drivers will need to do locking differently. The original orinoco_usb patches had a boolean variable controlling whether spin_lock_bh was used, or irq based locking. This version provides wrappers for the lock functions and the drivers specify the functions pointers needed. This will introduce a performance penalty, but I'm not expecting it to be noticable. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-01 14:05:40 +01:00
priv->hw.ops->lock_irqsave(&priv->lock, &flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
priv->hw_unavailable++;
orinoco: encapsulate driver locking Local bus and USB drivers will need to do locking differently. The original orinoco_usb patches had a boolean variable controlling whether spin_lock_bh was used, or irq based locking. This version provides wrappers for the lock functions and the drivers specify the functions pointers needed. This will introduce a performance penalty, but I'm not expecting it to be noticable. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-01 14:05:40 +01:00
priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:21:06 +02:00
pcmcia_disable_device(link);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (priv->hw.iobase)
ioport_unmap(priv->hw.iobase);
} /* orinoco_cs_release */
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:21:06 +02:00
static int orinoco_cs_suspend(struct pcmcia_device *link)
[PATCH] pcmcia: new suspend core Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-14 21:21:18 +01:00
{
orinoco: Replace net_device with orinoco_private in driver interfaces Move away from using net_device as the main structure in orinoco function calls. Use orinoco_private instead. This makes more sense when we move to cfg80211, and we get wiphys as well. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-18 23:21:23 +01:00
struct orinoco_private *priv = link->priv;
[PATCH] pcmcia: new suspend core Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-14 21:21:18 +01:00
struct orinoco_pccard *card = priv->card;
[PATCH] pcmcia: use bitfield instead of p_state and state Instead of the two status values struct pcmcia_device->p_state and state, use descriptive bitfields. Most value-checking in drivers was invalid, as the core now only calls the ->remove() (a.k.a. detach) function in case the attachement _and_ configuration was successful. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-02 00:09:29 +01:00
/* This is probably racy, but I can't think of
a better way, short of rewriting the PCMCIA
layer to not suck :-( */
orinoco: Handle suspend/restore in core driver Each device does almost exactly the same things on suspend and resume when upping and downing the interface. So move this logic into a common routine. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-18 23:21:30 +01:00
if (!test_bit(0, &card->hard_reset_in_progress))
orinoco_down(priv);
[PATCH] pcmcia: new suspend core Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-14 21:21:18 +01:00
return 0;
}
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:21:06 +02:00
static int orinoco_cs_resume(struct pcmcia_device *link)
[PATCH] pcmcia: new suspend core Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-14 21:21:18 +01:00
{
orinoco: Replace net_device with orinoco_private in driver interfaces Move away from using net_device as the main structure in orinoco function calls. Use orinoco_private instead. This makes more sense when we move to cfg80211, and we get wiphys as well. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-18 23:21:23 +01:00
struct orinoco_private *priv = link->priv;
[PATCH] pcmcia: new suspend core Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-14 21:21:18 +01:00
struct orinoco_pccard *card = priv->card;
int err = 0;
orinoco: Handle suspend/restore in core driver Each device does almost exactly the same things on suspend and resume when upping and downing the interface. So move this logic into a common routine. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-18 23:21:30 +01:00
if (!test_bit(0, &card->hard_reset_in_progress))
err = orinoco_up(priv);
[PATCH] pcmcia: new suspend core Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-14 21:21:18 +01:00
[PATCH] orinoco: simplify locking, fix error handling in PCMCIA resume Don't use flags in the spinlocks - the PCMCIA resume functions may not be called under lock. Don't ignore any errors. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-01 02:13:28 -04:00
return err;
[PATCH] pcmcia: new suspend core Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-14 21:21:18 +01:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/********************************************************************/
/* Module initialization */
/********************************************************************/
pcmcia: Convert pcmcia_device_id declarations to const Saves about 50KB of data. Old/new size of all objects: text data bss dec hex filename 563015 80096 130684 773795 bcea3 (TOTALS) 610916 32256 130632 773804 bceac (TOTALS) Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> (for drivers/net/can/softing/softing_cs.c) Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-05-03 19:29:01 -07:00
static const struct pcmcia_device_id orinoco_cs_ids[] = {
[PATCH] orinoco: Update PCMCIA ID's. Author: Pavel Roskin <proski@gnu.org> Date: Fri Sep 16 01:07:47 2005 -0400 Update PCMCIA ID's. Intel Pro/Wireless 2011 and 2011B have the same numeric ID, so use strings instead. Take all entries from *.conf for Orinoco, HostAP and linux-wlan-ng and adds them with minimal changes (e.g. we don't need a revision string after a string that identifies the chipset). Add comments with card names to all numeric entries. Note: the comments don't and cannot cover all cards, since the main reason of having numeric IDs is to cover cards that are often rebranded. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-16 02:18:31 -04:00
PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */
PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */
PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */
PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
orinoco_cs: add ID for ARtem Onair Comcard 11 Reported by Michael Jarosch <mitsch@riotmusic.de> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-09 12:31:48 -05:00
PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0003), /* ARtem Onair Comcard 11 */
[PATCH] orinoco: Update PCMCIA ID's. Author: Pavel Roskin <proski@gnu.org> Date: Fri Sep 16 01:07:47 2005 -0400 Update PCMCIA ID's. Intel Pro/Wireless 2011 and 2011B have the same numeric ID, so use strings instead. Take all entries from *.conf for Orinoco, HostAP and linux-wlan-ng and adds them with minimal changes (e.g. we don't need a revision string after a string that identifies the chipset). Add comments with card names to all numeric entries. Note: the comments don't and cannot cover all cards, since the main reason of having numeric IDs is to cover cards that are often rebranded. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-16 02:18:31 -04:00
PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
orinoco_cs: add ID for SpeedStream wireless adapters Reported by Gerald Willmann <gerald.willmann@econ.kuleuven.be> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-16 17:53:03 -04:00
PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */
[PATCH] orinoco: Update PCMCIA ID's. Author: Pavel Roskin <proski@gnu.org> Date: Fri Sep 16 01:07:47 2005 -0400 Update PCMCIA ID's. Intel Pro/Wireless 2011 and 2011B have the same numeric ID, so use strings instead. Take all entries from *.conf for Orinoco, HostAP and linux-wlan-ng and adds them with minimal changes (e.g. we don't need a revision string after a string that identifies the chipset). Add comments with card names to all numeric entries. Note: the comments don't and cannot cover all cards, since the main reason of having numeric IDs is to cover cards that are often rebranded. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-16 02:18:31 -04:00
PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
orinoco: disable support for prism chipset by default The hostap driver provides better support for Prism chipset. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-11 23:13:28 -05:00
PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169),
PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916),
PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3),
PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077),
PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410),
PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3),
PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a),
PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767),
PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
orinoco_cs: be more careful when matching cards with ID 0x0156:0x0002 Without CONFIG_HERMES_PRISM, only match cards that have "Version 01.01" as the third product ID. Those have Agere firmware. With CONFIG_HERMES_PRISM, match all 0x0156:0x0002 cards. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-26 18:52:48 -04:00
PCMCIA_DEVICE_MANF_CARD_PROD_ID3(0x0156, 0x0002, "Version 01.01", 0xd27deb1a), /* Lucent Orinoco */
orinoco: disable support for prism chipset by default The hostap driver provides better support for Prism chipset. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-11 23:13:28 -05:00
#ifdef CONFIG_HERMES_PRISM
/* Only entries that certainly identify Prism chipset */
PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */
PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */
PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */
PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */
PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */
PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */
PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */
PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
[PATCH] orinoco: Update PCMCIA ID's. Author: Pavel Roskin <proski@gnu.org> Date: Fri Sep 16 01:07:47 2005 -0400 Update PCMCIA ID's. Intel Pro/Wireless 2011 and 2011B have the same numeric ID, so use strings instead. Take all entries from *.conf for Orinoco, HostAP and linux-wlan-ng and adds them with minimal changes (e.g. we don't need a revision string after a string that identifies the chipset). Add comments with card names to all numeric entries. Note: the comments don't and cannot cover all cards, since the main reason of having numeric IDs is to cover cards that are often rebranded. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-16 02:18:31 -04:00
PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */
PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */
orinoco: disable support for prism chipset by default The hostap driver provides better support for Prism chipset. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-11 23:13:28 -05:00
PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
[PATCH] pcmcia: id_table for orinoco_cs Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 16:28:27 -07:00
PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
[PATCH] orinoco: Update PCMCIA ID's. Author: Pavel Roskin <proski@gnu.org> Date: Fri Sep 16 01:07:47 2005 -0400 Update PCMCIA ID's. Intel Pro/Wireless 2011 and 2011B have the same numeric ID, so use strings instead. Take all entries from *.conf for Orinoco, HostAP and linux-wlan-ng and adds them with minimal changes (e.g. we don't need a revision string after a string that identifies the chipset). Add comments with card names to all numeric entries. Note: the comments don't and cannot cover all cards, since the main reason of having numeric IDs is to cover cards that are often rebranded. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-16 02:18:31 -04:00
PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2),
PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18),
orinoco: disable support for prism chipset by default The hostap driver provides better support for Prism chipset. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-11 23:13:28 -05:00
PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3),
[PATCH] orinoco: Update PCMCIA ID's. Author: Pavel Roskin <proski@gnu.org> Date: Fri Sep 16 01:07:47 2005 -0400 Update PCMCIA ID's. Intel Pro/Wireless 2011 and 2011B have the same numeric ID, so use strings instead. Take all entries from *.conf for Orinoco, HostAP and linux-wlan-ng and adds them with minimal changes (e.g. we don't need a revision string after a string that identifies the chipset). Add comments with card names to all numeric entries. Note: the comments don't and cannot cover all cards, since the main reason of having numeric IDs is to cover cards that are often rebranded. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-16 02:18:31 -04:00
PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b),
[PATCH] pcmcia: id_table for orinoco_cs Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 16:28:27 -07:00
PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584),
PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9),
[PATCH] pcmcia: add another orinoco_cs id Add new id to orinoco_cs (corega PCCB-11). Signed-off-by: <komurojun-mbn@nifty.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 01:25:05 -07:00
PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae),
orinoco: disable support for prism chipset by default The hostap driver provides better support for Prism chipset. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-11 23:13:28 -05:00
PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
[PATCH] pcmcia: id_table for orinoco_cs Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 16:28:27 -07:00
PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac),
PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab),
orinoco: disable support for prism chipset by default The hostap driver provides better support for Prism chipset. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-11 23:13:28 -05:00
PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
[PATCH] pcmcia: id_table for orinoco_cs Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 16:28:27 -07:00
PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
[PATCH] orinoco: Update PCMCIA ID's. Author: Pavel Roskin <proski@gnu.org> Date: Fri Sep 16 01:07:47 2005 -0400 Update PCMCIA ID's. Intel Pro/Wireless 2011 and 2011B have the same numeric ID, so use strings instead. Take all entries from *.conf for Orinoco, HostAP and linux-wlan-ng and adds them with minimal changes (e.g. we don't need a revision string after a string that identifies the chipset). Add comments with card names to all numeric entries. Note: the comments don't and cannot cover all cards, since the main reason of having numeric IDs is to cover cards that are often rebranded. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-16 02:18:31 -04:00
PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77),
PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf),
PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395),
[PATCH] pcmcia: id_table for orinoco_cs Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 16:28:27 -07:00
PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01),
PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1),
orinoco: disable support for prism chipset by default The hostap driver provides better support for Prism chipset. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-11 23:13:28 -05:00
PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1),
[PATCH] orinoco: Update PCMCIA ID's. Author: Pavel Roskin <proski@gnu.org> Date: Fri Sep 16 01:07:47 2005 -0400 Update PCMCIA ID's. Intel Pro/Wireless 2011 and 2011B have the same numeric ID, so use strings instead. Take all entries from *.conf for Orinoco, HostAP and linux-wlan-ng and adds them with minimal changes (e.g. we don't need a revision string after a string that identifies the chipset). Add comments with card names to all numeric entries. Note: the comments don't and cannot cover all cards, since the main reason of having numeric IDs is to cover cards that are often rebranded. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-16 02:18:31 -04:00
PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6),
[PATCH] pcmcia: id_table for orinoco_cs Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 16:28:27 -07:00
PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264),
[PATCH] orinoco: Update PCMCIA ID's. Author: Pavel Roskin <proski@gnu.org> Date: Fri Sep 16 01:07:47 2005 -0400 Update PCMCIA ID's. Intel Pro/Wireless 2011 and 2011B have the same numeric ID, so use strings instead. Take all entries from *.conf for Orinoco, HostAP and linux-wlan-ng and adds them with minimal changes (e.g. we don't need a revision string after a string that identifies the chipset). Add comments with card names to all numeric entries. Note: the comments don't and cannot cover all cards, since the main reason of having numeric IDs is to cover cards that are often rebranded. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-16 02:18:31 -04:00
PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178),
[PATCH] orinoco: support smc2532w The orinoco wireless driver can support the SMC 2532W-B PC Card, so add the id for it. Signed-off-by: Jesse Allen <the3dfxdude@gmail.com> Cc: Pavel Roskin <proski@gnu.org> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-12 14:34:56 -08:00
PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757),
[PATCH] orinoco: Update PCMCIA ID's. Author: Pavel Roskin <proski@gnu.org> Date: Fri Sep 16 01:07:47 2005 -0400 Update PCMCIA ID's. Intel Pro/Wireless 2011 and 2011B have the same numeric ID, so use strings instead. Take all entries from *.conf for Orinoco, HostAP and linux-wlan-ng and adds them with minimal changes (e.g. we don't need a revision string after a string that identifies the chipset). Add comments with card names to all numeric entries. Note: the comments don't and cannot cover all cards, since the main reason of having numeric IDs is to cover cards that are often rebranded. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-16 02:18:31 -04:00
PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee),
Introduce PCMCIA_DEVICE_PROD_ID3 ...and use it in hostap_cs and orinoco_cs. Another PCMCIA device with Intersil Prism chipset has been reported: Socket 0: product info: "Gigabyte", "GN-WLM01_P25L_ADAPTER", "ISL37300P", "Eval-RevA" manfid: 0x02e0, 0x1011 function: 6 (network) As it's the case with some other Prism based devices, the third ID string contains a design name that should be sufficient to identify the card as having Intersil Prism chipset and thus compatible with both orinoco_cs and hostap_cs. Introduce PCMCIA_DEVICE_PROD_ID3 that matches the third ID string only. Use it in orinoco_cs and hostap_cs to match cards with the third ID string indicating Prism chipset. Remove corresponding entries that use PCMCIA_DEVICE_PROD_ID123. Reported-by: Ozzy <ozzymud@gmail.com> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-11 17:56:06 -05:00
PCMCIA_DEVICE_PROD_ID3("HFA3863", 0x355cb092),
PCMCIA_DEVICE_PROD_ID3("ISL37100P", 0x630d52b2),
PCMCIA_DEVICE_PROD_ID3("ISL37101P-10", 0xdd97a26b),
PCMCIA_DEVICE_PROD_ID3("ISL37300P", 0xc9049a39),
orinoco_cs: be more careful when matching cards with ID 0x0156:0x0002 Without CONFIG_HERMES_PRISM, only match cards that have "Version 01.01" as the third product ID. Those have Agere firmware. With CONFIG_HERMES_PRISM, match all 0x0156:0x0002 cards. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-26 18:52:48 -04:00
/* This may be Agere or Intersil Firmware */
PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002),
orinoco: disable support for prism chipset by default The hostap driver provides better support for Prism chipset. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-11 23:13:28 -05:00
#endif
[PATCH] pcmcia: id_table for orinoco_cs Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 16:28:27 -07:00
PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
static struct pcmcia_driver orinoco_driver = {
.owner = THIS_MODULE,
pcmcia: move driver name to struct pcmcia_driver Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-08 11:36:26 +02:00
.name = DRIVER_NAME,
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:26:06 +02:00
.probe = orinoco_cs_probe,
[PATCH] pcmcia: unify detach, REMOVAL_EVENT handlers into one remove callback Unify the "detach" and REMOVAL_EVENT handlers to one "remove" function. Old functionality is preserved, for the moment. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-14 21:23:14 +01:00
.remove = orinoco_cs_detach,
[PATCH] pcmcia: id_table for orinoco_cs Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 16:28:27 -07:00
.id_table = orinoco_cs_ids,
[PATCH] pcmcia: new suspend core Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-14 21:21:18 +01:00
.suspend = orinoco_cs_suspend,
.resume = orinoco_cs_resume,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
};
drivers/net: use module_pcmcia_driver() in pcmcia drivers Use the new module_pcmcia_driver() macro to remove the boilerplate module init/exit code in the pcmcia drivers. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-06 11:27:43 -07:00
module_pcmcia_driver(orinoco_driver);
Reference in a new issue Copy permalink