| 
									
										
											  
											
												can: cc770: add legacy ISA bus driver for the CC770 and AN82527
This patch adds support for legacy Bosch CC770 and Intel AN82527 CAN
controllers on the ISA or PC-104 bus. The I/O port or memory address
and the IRQ number must be specified via module parameters:
  insmod cc770_isa.ko port=0x310,0x380 irq=7,11
for ISA devices using I/O ports or:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11
for memory mapped ISA devices.
Indirect access via address and data port is supported as well:
  insmod cc770_isa.ko port=0x310,0x380 indirect=1 irq=7,11
Furthermore, the following mode parameter can be defined:
  clk: External oscillator clock frequency (default=16000000 [16 MHz])
  cir: CPU interface register (default=0x40 [DSC])
  bcr: Bus configuration register (default=0x40 [CBY])
  cor: Clockout register (default=0x00)
Note: for clk, cir, bcr and cor, the first argument re-defines the
default for all other devices, e.g.:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000
is equivalent to
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000,24000000
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
											
										 
											2011-11-30 23:41:19 +00:00
										 |  |  | /*
 | 
					
						
							|  |  |  |  * Driver for CC770 and AN82527 CAN controllers on the legacy ISA bus | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * Copyright (C) 2009, 2011 Wolfgang Grandegger <wg@grandegger.com> | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * This program is free software; you can redistribute it and/or modify | 
					
						
							|  |  |  |  * it under the terms of the version 2 of the GNU General Public License | 
					
						
							|  |  |  |  * as published by the Free Software Foundation | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * This program is distributed in the hope that it will be useful, | 
					
						
							|  |  |  |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
					
						
							|  |  |  |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | 
					
						
							|  |  |  |  * GNU General Public License for more details. | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /*
 | 
					
						
							|  |  |  |  * Bosch CC770 and Intel AN82527 CAN controllers on the ISA or PC-104 bus. | 
					
						
							|  |  |  |  * The I/O port or memory address and the IRQ number must be specified via | 
					
						
							|  |  |  |  * module parameters: | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  *   insmod cc770_isa.ko port=0x310,0x380 irq=7,11 | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * for ISA devices using I/O ports or: | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  *   insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * for memory mapped ISA devices. | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * Indirect access via address and data port is supported as well: | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  *   insmod cc770_isa.ko port=0x310,0x380 indirect=1 irq=7,11 | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * Furthermore, the following mode parameter can be defined: | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  *   clk: External oscillator clock frequency (default=16000000 [16 MHz]) | 
					
						
							|  |  |  |  *   cir: CPU interface register (default=0x40 [DSC]) | 
					
						
							|  |  |  |  *   bcr: Bus configuration register (default=0x40 [CBY]) | 
					
						
							|  |  |  |  *   cor: Clockout register (default=0x00) | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * Note: for clk, cir, bcr and cor, the first argument re-defines the | 
					
						
							|  |  |  |  * default for all other devices, e.g.: | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  *   insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000 | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * is equivalent to | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  *   insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000,24000000 | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #include <linux/kernel.h>
 | 
					
						
							|  |  |  | #include <linux/module.h>
 | 
					
						
							|  |  |  | #include <linux/platform_device.h>
 | 
					
						
							|  |  |  | #include <linux/interrupt.h>
 | 
					
						
							|  |  |  | #include <linux/netdevice.h>
 | 
					
						
							|  |  |  | #include <linux/delay.h>
 | 
					
						
							|  |  |  | #include <linux/irq.h>
 | 
					
						
							|  |  |  | #include <linux/io.h>
 | 
					
						
							|  |  |  | #include <linux/can.h>
 | 
					
						
							|  |  |  | #include <linux/can/dev.h>
 | 
					
						
							|  |  |  | #include <linux/can/platform/cc770.h>
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #include "cc770.h"
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define MAXDEV 8
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>"); | 
					
						
							|  |  |  | MODULE_DESCRIPTION("Socket-CAN driver for CC770 on the ISA bus"); | 
					
						
							|  |  |  | MODULE_LICENSE("GPL v2"); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define CLK_DEFAULT	16000000	/* 16 MHz */
 | 
					
						
							|  |  |  | #define COR_DEFAULT	0x00
 | 
					
						
							|  |  |  | #define BCR_DEFAULT	BUSCFG_CBY
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static unsigned long port[MAXDEV]; | 
					
						
							|  |  |  | static unsigned long mem[MAXDEV]; | 
					
						
							| 
									
										
										
										
											2012-12-03 09:22:44 -05:00
										 |  |  | static int irq[MAXDEV]; | 
					
						
							|  |  |  | static int clk[MAXDEV]; | 
					
						
							|  |  |  | static u8 cir[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff}; | 
					
						
							|  |  |  | static u8 cor[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff}; | 
					
						
							|  |  |  | static u8 bcr[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff}; | 
					
						
							|  |  |  | static int indirect[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1}; | 
					
						
							| 
									
										
											  
											
												can: cc770: add legacy ISA bus driver for the CC770 and AN82527
This patch adds support for legacy Bosch CC770 and Intel AN82527 CAN
controllers on the ISA or PC-104 bus. The I/O port or memory address
and the IRQ number must be specified via module parameters:
  insmod cc770_isa.ko port=0x310,0x380 irq=7,11
for ISA devices using I/O ports or:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11
for memory mapped ISA devices.
Indirect access via address and data port is supported as well:
  insmod cc770_isa.ko port=0x310,0x380 indirect=1 irq=7,11
Furthermore, the following mode parameter can be defined:
  clk: External oscillator clock frequency (default=16000000 [16 MHz])
  cir: CPU interface register (default=0x40 [DSC])
  bcr: Bus configuration register (default=0x40 [CBY])
  cor: Clockout register (default=0x00)
Note: for clk, cir, bcr and cor, the first argument re-defines the
default for all other devices, e.g.:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000
is equivalent to
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000,24000000
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
											
										 
											2011-11-30 23:41:19 +00:00
										 |  |  | 
 | 
					
						
							|  |  |  | module_param_array(port, ulong, NULL, S_IRUGO); | 
					
						
							|  |  |  | MODULE_PARM_DESC(port, "I/O port number"); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | module_param_array(mem, ulong, NULL, S_IRUGO); | 
					
						
							|  |  |  | MODULE_PARM_DESC(mem, "I/O memory address"); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | module_param_array(indirect, int, NULL, S_IRUGO); | 
					
						
							|  |  |  | MODULE_PARM_DESC(indirect, "Indirect access via address and data port"); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | module_param_array(irq, int, NULL, S_IRUGO); | 
					
						
							|  |  |  | MODULE_PARM_DESC(irq, "IRQ number"); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | module_param_array(clk, int, NULL, S_IRUGO); | 
					
						
							|  |  |  | MODULE_PARM_DESC(clk, "External oscillator clock frequency " | 
					
						
							|  |  |  | 		 "(default=16000000 [16 MHz])"); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | module_param_array(cir, byte, NULL, S_IRUGO); | 
					
						
							|  |  |  | MODULE_PARM_DESC(cir, "CPU interface register (default=0x40 [DSC])"); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | module_param_array(cor, byte, NULL, S_IRUGO); | 
					
						
							|  |  |  | MODULE_PARM_DESC(cor, "Clockout register (default=0x00)"); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | module_param_array(bcr, byte, NULL, S_IRUGO); | 
					
						
							|  |  |  | MODULE_PARM_DESC(bcr, "Bus configuration register (default=0x40 [CBY])"); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define CC770_IOSIZE          0x20
 | 
					
						
							|  |  |  | #define CC770_IOSIZE_INDIRECT 0x02
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-01-15 13:21:34 +01:00
										 |  |  | /* Spinlock for cc770_isa_port_write_reg_indirect
 | 
					
						
							|  |  |  |  * and cc770_isa_port_read_reg_indirect | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | static DEFINE_SPINLOCK(cc770_isa_port_lock); | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
											  
											
												can: cc770: add legacy ISA bus driver for the CC770 and AN82527
This patch adds support for legacy Bosch CC770 and Intel AN82527 CAN
controllers on the ISA or PC-104 bus. The I/O port or memory address
and the IRQ number must be specified via module parameters:
  insmod cc770_isa.ko port=0x310,0x380 irq=7,11
for ISA devices using I/O ports or:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11
for memory mapped ISA devices.
Indirect access via address and data port is supported as well:
  insmod cc770_isa.ko port=0x310,0x380 indirect=1 irq=7,11
Furthermore, the following mode parameter can be defined:
  clk: External oscillator clock frequency (default=16000000 [16 MHz])
  cir: CPU interface register (default=0x40 [DSC])
  bcr: Bus configuration register (default=0x40 [CBY])
  cor: Clockout register (default=0x00)
Note: for clk, cir, bcr and cor, the first argument re-defines the
default for all other devices, e.g.:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000
is equivalent to
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000,24000000
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
											
										 
											2011-11-30 23:41:19 +00:00
										 |  |  | static struct platform_device *cc770_isa_devs[MAXDEV]; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static u8 cc770_isa_mem_read_reg(const struct cc770_priv *priv, int reg) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	return readb(priv->reg_base + reg); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static void cc770_isa_mem_write_reg(const struct cc770_priv *priv, | 
					
						
							|  |  |  | 				      int reg, u8 val) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	writeb(val, priv->reg_base + reg); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static u8 cc770_isa_port_read_reg(const struct cc770_priv *priv, int reg) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	return inb((unsigned long)priv->reg_base + reg); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static void cc770_isa_port_write_reg(const struct cc770_priv *priv, | 
					
						
							|  |  |  | 				       int reg, u8 val) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	outb(val, (unsigned long)priv->reg_base + reg); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static u8 cc770_isa_port_read_reg_indirect(const struct cc770_priv *priv, | 
					
						
							|  |  |  | 					     int reg) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	unsigned long base = (unsigned long)priv->reg_base; | 
					
						
							| 
									
										
										
										
											2012-01-15 13:21:34 +01:00
										 |  |  | 	unsigned long flags; | 
					
						
							|  |  |  | 	u8 val; | 
					
						
							| 
									
										
											  
											
												can: cc770: add legacy ISA bus driver for the CC770 and AN82527
This patch adds support for legacy Bosch CC770 and Intel AN82527 CAN
controllers on the ISA or PC-104 bus. The I/O port or memory address
and the IRQ number must be specified via module parameters:
  insmod cc770_isa.ko port=0x310,0x380 irq=7,11
for ISA devices using I/O ports or:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11
for memory mapped ISA devices.
Indirect access via address and data port is supported as well:
  insmod cc770_isa.ko port=0x310,0x380 indirect=1 irq=7,11
Furthermore, the following mode parameter can be defined:
  clk: External oscillator clock frequency (default=16000000 [16 MHz])
  cir: CPU interface register (default=0x40 [DSC])
  bcr: Bus configuration register (default=0x40 [CBY])
  cor: Clockout register (default=0x00)
Note: for clk, cir, bcr and cor, the first argument re-defines the
default for all other devices, e.g.:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000
is equivalent to
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000,24000000
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
											
										 
											2011-11-30 23:41:19 +00:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-01-15 13:21:34 +01:00
										 |  |  | 	spin_lock_irqsave(&cc770_isa_port_lock, flags); | 
					
						
							| 
									
										
											  
											
												can: cc770: add legacy ISA bus driver for the CC770 and AN82527
This patch adds support for legacy Bosch CC770 and Intel AN82527 CAN
controllers on the ISA or PC-104 bus. The I/O port or memory address
and the IRQ number must be specified via module parameters:
  insmod cc770_isa.ko port=0x310,0x380 irq=7,11
for ISA devices using I/O ports or:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11
for memory mapped ISA devices.
Indirect access via address and data port is supported as well:
  insmod cc770_isa.ko port=0x310,0x380 indirect=1 irq=7,11
Furthermore, the following mode parameter can be defined:
  clk: External oscillator clock frequency (default=16000000 [16 MHz])
  cir: CPU interface register (default=0x40 [DSC])
  bcr: Bus configuration register (default=0x40 [CBY])
  cor: Clockout register (default=0x00)
Note: for clk, cir, bcr and cor, the first argument re-defines the
default for all other devices, e.g.:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000
is equivalent to
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000,24000000
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
											
										 
											2011-11-30 23:41:19 +00:00
										 |  |  | 	outb(reg, base); | 
					
						
							| 
									
										
										
										
											2012-01-15 13:21:34 +01:00
										 |  |  | 	val = inb(base + 1); | 
					
						
							|  |  |  | 	spin_unlock_irqrestore(&cc770_isa_port_lock, flags); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return val; | 
					
						
							| 
									
										
											  
											
												can: cc770: add legacy ISA bus driver for the CC770 and AN82527
This patch adds support for legacy Bosch CC770 and Intel AN82527 CAN
controllers on the ISA or PC-104 bus. The I/O port or memory address
and the IRQ number must be specified via module parameters:
  insmod cc770_isa.ko port=0x310,0x380 irq=7,11
for ISA devices using I/O ports or:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11
for memory mapped ISA devices.
Indirect access via address and data port is supported as well:
  insmod cc770_isa.ko port=0x310,0x380 indirect=1 irq=7,11
Furthermore, the following mode parameter can be defined:
  clk: External oscillator clock frequency (default=16000000 [16 MHz])
  cir: CPU interface register (default=0x40 [DSC])
  bcr: Bus configuration register (default=0x40 [CBY])
  cor: Clockout register (default=0x00)
Note: for clk, cir, bcr and cor, the first argument re-defines the
default for all other devices, e.g.:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000
is equivalent to
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000,24000000
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
											
										 
											2011-11-30 23:41:19 +00:00
										 |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static void cc770_isa_port_write_reg_indirect(const struct cc770_priv *priv, | 
					
						
							|  |  |  | 						int reg, u8 val) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	unsigned long base = (unsigned long)priv->reg_base; | 
					
						
							| 
									
										
										
										
											2012-01-15 13:21:34 +01:00
										 |  |  | 	unsigned long flags; | 
					
						
							| 
									
										
											  
											
												can: cc770: add legacy ISA bus driver for the CC770 and AN82527
This patch adds support for legacy Bosch CC770 and Intel AN82527 CAN
controllers on the ISA or PC-104 bus. The I/O port or memory address
and the IRQ number must be specified via module parameters:
  insmod cc770_isa.ko port=0x310,0x380 irq=7,11
for ISA devices using I/O ports or:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11
for memory mapped ISA devices.
Indirect access via address and data port is supported as well:
  insmod cc770_isa.ko port=0x310,0x380 indirect=1 irq=7,11
Furthermore, the following mode parameter can be defined:
  clk: External oscillator clock frequency (default=16000000 [16 MHz])
  cir: CPU interface register (default=0x40 [DSC])
  bcr: Bus configuration register (default=0x40 [CBY])
  cor: Clockout register (default=0x00)
Note: for clk, cir, bcr and cor, the first argument re-defines the
default for all other devices, e.g.:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000
is equivalent to
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000,24000000
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
											
										 
											2011-11-30 23:41:19 +00:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-01-15 13:21:34 +01:00
										 |  |  | 	spin_lock_irqsave(&cc770_isa_port_lock, flags); | 
					
						
							| 
									
										
											  
											
												can: cc770: add legacy ISA bus driver for the CC770 and AN82527
This patch adds support for legacy Bosch CC770 and Intel AN82527 CAN
controllers on the ISA or PC-104 bus. The I/O port or memory address
and the IRQ number must be specified via module parameters:
  insmod cc770_isa.ko port=0x310,0x380 irq=7,11
for ISA devices using I/O ports or:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11
for memory mapped ISA devices.
Indirect access via address and data port is supported as well:
  insmod cc770_isa.ko port=0x310,0x380 indirect=1 irq=7,11
Furthermore, the following mode parameter can be defined:
  clk: External oscillator clock frequency (default=16000000 [16 MHz])
  cir: CPU interface register (default=0x40 [DSC])
  bcr: Bus configuration register (default=0x40 [CBY])
  cor: Clockout register (default=0x00)
Note: for clk, cir, bcr and cor, the first argument re-defines the
default for all other devices, e.g.:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000
is equivalent to
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000,24000000
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
											
										 
											2011-11-30 23:41:19 +00:00
										 |  |  | 	outb(reg, base); | 
					
						
							|  |  |  | 	outb(val, base + 1); | 
					
						
							| 
									
										
										
										
											2012-01-15 13:21:34 +01:00
										 |  |  | 	spin_unlock_irqrestore(&cc770_isa_port_lock, flags); | 
					
						
							| 
									
										
											  
											
												can: cc770: add legacy ISA bus driver for the CC770 and AN82527
This patch adds support for legacy Bosch CC770 and Intel AN82527 CAN
controllers on the ISA or PC-104 bus. The I/O port or memory address
and the IRQ number must be specified via module parameters:
  insmod cc770_isa.ko port=0x310,0x380 irq=7,11
for ISA devices using I/O ports or:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11
for memory mapped ISA devices.
Indirect access via address and data port is supported as well:
  insmod cc770_isa.ko port=0x310,0x380 indirect=1 irq=7,11
Furthermore, the following mode parameter can be defined:
  clk: External oscillator clock frequency (default=16000000 [16 MHz])
  cir: CPU interface register (default=0x40 [DSC])
  bcr: Bus configuration register (default=0x40 [CBY])
  cor: Clockout register (default=0x00)
Note: for clk, cir, bcr and cor, the first argument re-defines the
default for all other devices, e.g.:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000
is equivalent to
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000,24000000
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
											
										 
											2011-11-30 23:41:19 +00:00
										 |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-12-03 09:22:44 -05:00
										 |  |  | static int cc770_isa_probe(struct platform_device *pdev) | 
					
						
							| 
									
										
											  
											
												can: cc770: add legacy ISA bus driver for the CC770 and AN82527
This patch adds support for legacy Bosch CC770 and Intel AN82527 CAN
controllers on the ISA or PC-104 bus. The I/O port or memory address
and the IRQ number must be specified via module parameters:
  insmod cc770_isa.ko port=0x310,0x380 irq=7,11
for ISA devices using I/O ports or:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11
for memory mapped ISA devices.
Indirect access via address and data port is supported as well:
  insmod cc770_isa.ko port=0x310,0x380 indirect=1 irq=7,11
Furthermore, the following mode parameter can be defined:
  clk: External oscillator clock frequency (default=16000000 [16 MHz])
  cir: CPU interface register (default=0x40 [DSC])
  bcr: Bus configuration register (default=0x40 [CBY])
  cor: Clockout register (default=0x00)
Note: for clk, cir, bcr and cor, the first argument re-defines the
default for all other devices, e.g.:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000
is equivalent to
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000,24000000
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
											
										 
											2011-11-30 23:41:19 +00:00
										 |  |  | { | 
					
						
							|  |  |  | 	struct net_device *dev; | 
					
						
							|  |  |  | 	struct cc770_priv *priv; | 
					
						
							|  |  |  | 	void __iomem *base = NULL; | 
					
						
							|  |  |  | 	int iosize = CC770_IOSIZE; | 
					
						
							|  |  |  | 	int idx = pdev->id; | 
					
						
							|  |  |  | 	int err; | 
					
						
							|  |  |  | 	u32 clktmp; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	dev_dbg(&pdev->dev, "probing idx=%d: port=%#lx, mem=%#lx, irq=%d\n", | 
					
						
							|  |  |  | 		idx, port[idx], mem[idx], irq[idx]); | 
					
						
							|  |  |  | 	if (mem[idx]) { | 
					
						
							|  |  |  | 		if (!request_mem_region(mem[idx], iosize, KBUILD_MODNAME)) { | 
					
						
							|  |  |  | 			err = -EBUSY; | 
					
						
							|  |  |  | 			goto exit; | 
					
						
							|  |  |  | 		} | 
					
						
							|  |  |  | 		base = ioremap_nocache(mem[idx], iosize); | 
					
						
							|  |  |  | 		if (!base) { | 
					
						
							|  |  |  | 			err = -ENOMEM; | 
					
						
							|  |  |  | 			goto exit_release; | 
					
						
							|  |  |  | 		} | 
					
						
							|  |  |  | 	} else { | 
					
						
							|  |  |  | 		if (indirect[idx] > 0 || | 
					
						
							|  |  |  | 		    (indirect[idx] == -1 && indirect[0] > 0)) | 
					
						
							|  |  |  | 			iosize = CC770_IOSIZE_INDIRECT; | 
					
						
							|  |  |  | 		if (!request_region(port[idx], iosize, KBUILD_MODNAME)) { | 
					
						
							|  |  |  | 			err = -EBUSY; | 
					
						
							|  |  |  | 			goto exit; | 
					
						
							|  |  |  | 		} | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	dev = alloc_cc770dev(0); | 
					
						
							|  |  |  | 	if (!dev) { | 
					
						
							|  |  |  | 		err = -ENOMEM; | 
					
						
							|  |  |  | 		goto exit_unmap; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 	priv = netdev_priv(dev); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	dev->irq = irq[idx]; | 
					
						
							|  |  |  | 	priv->irq_flags = IRQF_SHARED; | 
					
						
							|  |  |  | 	if (mem[idx]) { | 
					
						
							|  |  |  | 		priv->reg_base = base; | 
					
						
							|  |  |  | 		dev->base_addr = mem[idx]; | 
					
						
							|  |  |  | 		priv->read_reg = cc770_isa_mem_read_reg; | 
					
						
							|  |  |  | 		priv->write_reg = cc770_isa_mem_write_reg; | 
					
						
							|  |  |  | 	} else { | 
					
						
							|  |  |  | 		priv->reg_base = (void __iomem *)port[idx]; | 
					
						
							|  |  |  | 		dev->base_addr = port[idx]; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 		if (iosize == CC770_IOSIZE_INDIRECT) { | 
					
						
							|  |  |  | 			priv->read_reg = cc770_isa_port_read_reg_indirect; | 
					
						
							|  |  |  | 			priv->write_reg = cc770_isa_port_write_reg_indirect; | 
					
						
							|  |  |  | 		} else { | 
					
						
							|  |  |  | 			priv->read_reg = cc770_isa_port_read_reg; | 
					
						
							|  |  |  | 			priv->write_reg = cc770_isa_port_write_reg; | 
					
						
							|  |  |  | 		} | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (clk[idx]) | 
					
						
							|  |  |  | 		clktmp = clk[idx]; | 
					
						
							|  |  |  | 	else if (clk[0]) | 
					
						
							|  |  |  | 		clktmp = clk[0]; | 
					
						
							|  |  |  | 	else | 
					
						
							|  |  |  | 		clktmp = CLK_DEFAULT; | 
					
						
							|  |  |  | 	priv->can.clock.freq = clktmp; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (cir[idx] != 0xff) { | 
					
						
							|  |  |  | 		priv->cpu_interface = cir[idx]; | 
					
						
							|  |  |  | 	} else if (cir[0] != 0xff) { | 
					
						
							|  |  |  | 		priv->cpu_interface = cir[0]; | 
					
						
							|  |  |  | 	} else { | 
					
						
							|  |  |  | 		/* The system clock may not exceed 10 MHz */ | 
					
						
							|  |  |  | 		if (clktmp > 10000000) { | 
					
						
							|  |  |  | 			priv->cpu_interface |= CPUIF_DSC; | 
					
						
							|  |  |  | 			clktmp /= 2; | 
					
						
							|  |  |  | 		} | 
					
						
							|  |  |  | 		/* The memory clock may not exceed 8 MHz */ | 
					
						
							|  |  |  | 		if (clktmp > 8000000) | 
					
						
							|  |  |  | 			priv->cpu_interface |= CPUIF_DMC; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (priv->cpu_interface & CPUIF_DSC) | 
					
						
							|  |  |  | 		priv->can.clock.freq /= 2; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (bcr[idx] != 0xff) | 
					
						
							|  |  |  | 		priv->bus_config = bcr[idx]; | 
					
						
							|  |  |  | 	else if (bcr[0] != 0xff) | 
					
						
							|  |  |  | 		priv->bus_config = bcr[0]; | 
					
						
							|  |  |  | 	else | 
					
						
							|  |  |  | 		priv->bus_config = BCR_DEFAULT; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (cor[idx] != 0xff) | 
					
						
							|  |  |  | 		priv->clkout = cor[idx]; | 
					
						
							|  |  |  | 	else if (cor[0] != 0xff) | 
					
						
							|  |  |  | 		priv->clkout = cor[0]; | 
					
						
							|  |  |  | 	else | 
					
						
							|  |  |  | 		priv->clkout = COR_DEFAULT; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2013-05-23 19:47:58 +09:00
										 |  |  | 	platform_set_drvdata(pdev, dev); | 
					
						
							| 
									
										
											  
											
												can: cc770: add legacy ISA bus driver for the CC770 and AN82527
This patch adds support for legacy Bosch CC770 and Intel AN82527 CAN
controllers on the ISA or PC-104 bus. The I/O port or memory address
and the IRQ number must be specified via module parameters:
  insmod cc770_isa.ko port=0x310,0x380 irq=7,11
for ISA devices using I/O ports or:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11
for memory mapped ISA devices.
Indirect access via address and data port is supported as well:
  insmod cc770_isa.ko port=0x310,0x380 indirect=1 irq=7,11
Furthermore, the following mode parameter can be defined:
  clk: External oscillator clock frequency (default=16000000 [16 MHz])
  cir: CPU interface register (default=0x40 [DSC])
  bcr: Bus configuration register (default=0x40 [CBY])
  cor: Clockout register (default=0x00)
Note: for clk, cir, bcr and cor, the first argument re-defines the
default for all other devices, e.g.:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000
is equivalent to
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000,24000000
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
											
										 
											2011-11-30 23:41:19 +00:00
										 |  |  | 	SET_NETDEV_DEV(dev, &pdev->dev); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	err = register_cc770dev(dev); | 
					
						
							|  |  |  | 	if (err) { | 
					
						
							|  |  |  | 		dev_err(&pdev->dev, | 
					
						
							|  |  |  | 			"couldn't register device (err=%d)\n", err); | 
					
						
							|  |  |  | 		goto exit_unmap; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	dev_info(&pdev->dev, "device registered (reg_base=0x%p, irq=%d)\n", | 
					
						
							|  |  |  | 		 priv->reg_base, dev->irq); | 
					
						
							|  |  |  | 	return 0; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  |  exit_unmap: | 
					
						
							|  |  |  | 	if (mem[idx]) | 
					
						
							|  |  |  | 		iounmap(base); | 
					
						
							|  |  |  |  exit_release: | 
					
						
							|  |  |  | 	if (mem[idx]) | 
					
						
							|  |  |  | 		release_mem_region(mem[idx], iosize); | 
					
						
							|  |  |  | 	else | 
					
						
							|  |  |  | 		release_region(port[idx], iosize); | 
					
						
							|  |  |  |  exit: | 
					
						
							|  |  |  | 	return err; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-12-03 09:22:44 -05:00
										 |  |  | static int cc770_isa_remove(struct platform_device *pdev) | 
					
						
							| 
									
										
											  
											
												can: cc770: add legacy ISA bus driver for the CC770 and AN82527
This patch adds support for legacy Bosch CC770 and Intel AN82527 CAN
controllers on the ISA or PC-104 bus. The I/O port or memory address
and the IRQ number must be specified via module parameters:
  insmod cc770_isa.ko port=0x310,0x380 irq=7,11
for ISA devices using I/O ports or:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11
for memory mapped ISA devices.
Indirect access via address and data port is supported as well:
  insmod cc770_isa.ko port=0x310,0x380 indirect=1 irq=7,11
Furthermore, the following mode parameter can be defined:
  clk: External oscillator clock frequency (default=16000000 [16 MHz])
  cir: CPU interface register (default=0x40 [DSC])
  bcr: Bus configuration register (default=0x40 [CBY])
  cor: Clockout register (default=0x00)
Note: for clk, cir, bcr and cor, the first argument re-defines the
default for all other devices, e.g.:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000
is equivalent to
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000,24000000
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
											
										 
											2011-11-30 23:41:19 +00:00
										 |  |  | { | 
					
						
							| 
									
										
										
										
											2013-05-23 19:47:58 +09:00
										 |  |  | 	struct net_device *dev = platform_get_drvdata(pdev); | 
					
						
							| 
									
										
											  
											
												can: cc770: add legacy ISA bus driver for the CC770 and AN82527
This patch adds support for legacy Bosch CC770 and Intel AN82527 CAN
controllers on the ISA or PC-104 bus. The I/O port or memory address
and the IRQ number must be specified via module parameters:
  insmod cc770_isa.ko port=0x310,0x380 irq=7,11
for ISA devices using I/O ports or:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11
for memory mapped ISA devices.
Indirect access via address and data port is supported as well:
  insmod cc770_isa.ko port=0x310,0x380 indirect=1 irq=7,11
Furthermore, the following mode parameter can be defined:
  clk: External oscillator clock frequency (default=16000000 [16 MHz])
  cir: CPU interface register (default=0x40 [DSC])
  bcr: Bus configuration register (default=0x40 [CBY])
  cor: Clockout register (default=0x00)
Note: for clk, cir, bcr and cor, the first argument re-defines the
default for all other devices, e.g.:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000
is equivalent to
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000,24000000
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
											
										 
											2011-11-30 23:41:19 +00:00
										 |  |  | 	struct cc770_priv *priv = netdev_priv(dev); | 
					
						
							|  |  |  | 	int idx = pdev->id; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	unregister_cc770dev(dev); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (mem[idx]) { | 
					
						
							|  |  |  | 		iounmap(priv->reg_base); | 
					
						
							|  |  |  | 		release_mem_region(mem[idx], CC770_IOSIZE); | 
					
						
							|  |  |  | 	} else { | 
					
						
							|  |  |  | 		if (priv->read_reg == cc770_isa_port_read_reg_indirect) | 
					
						
							|  |  |  | 			release_region(port[idx], CC770_IOSIZE_INDIRECT); | 
					
						
							|  |  |  | 		else | 
					
						
							|  |  |  | 			release_region(port[idx], CC770_IOSIZE); | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 	free_cc770dev(dev); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return 0; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static struct platform_driver cc770_isa_driver = { | 
					
						
							|  |  |  | 	.probe = cc770_isa_probe, | 
					
						
							| 
									
										
										
										
											2012-12-03 09:22:44 -05:00
										 |  |  | 	.remove = cc770_isa_remove, | 
					
						
							| 
									
										
											  
											
												can: cc770: add legacy ISA bus driver for the CC770 and AN82527
This patch adds support for legacy Bosch CC770 and Intel AN82527 CAN
controllers on the ISA or PC-104 bus. The I/O port or memory address
and the IRQ number must be specified via module parameters:
  insmod cc770_isa.ko port=0x310,0x380 irq=7,11
for ISA devices using I/O ports or:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11
for memory mapped ISA devices.
Indirect access via address and data port is supported as well:
  insmod cc770_isa.ko port=0x310,0x380 indirect=1 irq=7,11
Furthermore, the following mode parameter can be defined:
  clk: External oscillator clock frequency (default=16000000 [16 MHz])
  cir: CPU interface register (default=0x40 [DSC])
  bcr: Bus configuration register (default=0x40 [CBY])
  cor: Clockout register (default=0x00)
Note: for clk, cir, bcr and cor, the first argument re-defines the
default for all other devices, e.g.:
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000
is equivalent to
  insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000,24000000
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
											
										 
											2011-11-30 23:41:19 +00:00
										 |  |  | 	.driver = { | 
					
						
							|  |  |  | 		.name = KBUILD_MODNAME, | 
					
						
							|  |  |  | 		.owner = THIS_MODULE, | 
					
						
							|  |  |  | 	}, | 
					
						
							|  |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static int __init cc770_isa_init(void) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	int idx, err; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	for (idx = 0; idx < ARRAY_SIZE(cc770_isa_devs); idx++) { | 
					
						
							|  |  |  | 		if ((port[idx] || mem[idx]) && irq[idx]) { | 
					
						
							|  |  |  | 			cc770_isa_devs[idx] = | 
					
						
							|  |  |  | 				platform_device_alloc(KBUILD_MODNAME, idx); | 
					
						
							|  |  |  | 			if (!cc770_isa_devs[idx]) { | 
					
						
							|  |  |  | 				err = -ENOMEM; | 
					
						
							|  |  |  | 				goto exit_free_devices; | 
					
						
							|  |  |  | 			} | 
					
						
							|  |  |  | 			err = platform_device_add(cc770_isa_devs[idx]); | 
					
						
							|  |  |  | 			if (err) { | 
					
						
							|  |  |  | 				platform_device_put(cc770_isa_devs[idx]); | 
					
						
							|  |  |  | 				goto exit_free_devices; | 
					
						
							|  |  |  | 			} | 
					
						
							|  |  |  | 			pr_debug("platform device %d: port=%#lx, mem=%#lx, " | 
					
						
							|  |  |  | 				 "irq=%d\n", | 
					
						
							|  |  |  | 				 idx, port[idx], mem[idx], irq[idx]); | 
					
						
							|  |  |  | 		} else if (idx == 0 || port[idx] || mem[idx]) { | 
					
						
							|  |  |  | 			pr_err("insufficient parameters supplied\n"); | 
					
						
							|  |  |  | 			err = -EINVAL; | 
					
						
							|  |  |  | 			goto exit_free_devices; | 
					
						
							|  |  |  | 		} | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	err = platform_driver_register(&cc770_isa_driver); | 
					
						
							|  |  |  | 	if (err) | 
					
						
							|  |  |  | 		goto exit_free_devices; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	pr_info("driver for max. %d devices registered\n", MAXDEV); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return 0; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | exit_free_devices: | 
					
						
							|  |  |  | 	while (--idx >= 0) { | 
					
						
							|  |  |  | 		if (cc770_isa_devs[idx]) | 
					
						
							|  |  |  | 			platform_device_unregister(cc770_isa_devs[idx]); | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return err; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | module_init(cc770_isa_init); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static void __exit cc770_isa_exit(void) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	int idx; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	platform_driver_unregister(&cc770_isa_driver); | 
					
						
							|  |  |  | 	for (idx = 0; idx < ARRAY_SIZE(cc770_isa_devs); idx++) { | 
					
						
							|  |  |  | 		if (cc770_isa_devs[idx]) | 
					
						
							|  |  |  | 			platform_device_unregister(cc770_isa_devs[idx]); | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | module_exit(cc770_isa_exit); |