forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
linux-pinenote/arch/arm/boot/dts/tegra114-dalmore.dts

1235 lines
28 KiB
Text
Raw Normal View History

ARM: dt: tegra114: Add new board, Dalmore Add a new evaluation board, Dalmore for Tegra 114 family. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-24 01:10:24 +00:00
/dts-v1/;
ARM: tegra: use dt-binding header for key code In place of hardcoding the key code in DTS file and comment the key code as side notes, use the key code macro defines in the dt-bindings/input/input.h directly. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-09-18 18:52:32 +05:30
#include <dt-bindings/input/input.h>
ARM: tegra: use #include for all device trees Replace /include/ (dtc) with #include (C pre-processor) for all Tegra DT files, so that gcc -E handles the entire include tree, and hence any of those files can #include some other file e.g. for constant definitions. This allows future use of #defines and header files in order to define names for various constants, such as the IDs and flags in GPIO specifiers. Use of those features will increase the readability of the device tree files. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-17 16:38:21 -06:00
#include "tegra114.dtsi"
ARM: dt: tegra114: Add new board, Dalmore Add a new evaluation board, Dalmore for Tegra 114 family. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-24 01:10:24 +00:00
/ {
model = "NVIDIA Tegra114 Dalmore evaluation board";
compatible = "nvidia,dalmore", "nvidia,tegra114";
memory {
reg = <0x80000000 0x40000000>;
};
ARM: tegra: add default pinctrl nodes for Dalmore This change adds the default pinctrl nodes for the Dalmore Tegra114 platform. Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com> [Rhyland added patch description] Signed-off-by: Rhyland Klein <rklein@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> [swarren: fixed DT node sort order] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-11 12:25:13 +00:00
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
clk1_out_pw4 {
nvidia,pins = "clk1_out_pw4";
nvidia,function = "extperiph1";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
dap1_din_pn1 {
nvidia,pins = "dap1_din_pn1";
nvidia,function = "i2s0";
nvidia,pull = <0>;
nvidia,tristate = <1>;
nvidia,enable-input = <1>;
};
dap1_dout_pn2 {
nvidia,pins = "dap1_dout_pn2",
"dap1_fs_pn0",
"dap1_sclk_pn3";
nvidia,function = "i2s0";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
dap2_din_pa4 {
nvidia,pins = "dap2_din_pa4";
nvidia,function = "i2s1";
nvidia,pull = <0>;
nvidia,tristate = <1>;
nvidia,enable-input = <1>;
};
dap2_dout_pa5 {
nvidia,pins = "dap2_dout_pa5",
"dap2_fs_pa2",
"dap2_sclk_pa3";
nvidia,function = "i2s1";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
dap4_din_pp5 {
nvidia,pins = "dap4_din_pp5",
"dap4_dout_pp6",
"dap4_fs_pp4",
"dap4_sclk_pp7";
nvidia,function = "i2s3";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
dvfs_pwm_px0 {
nvidia,pins = "dvfs_pwm_px0",
"dvfs_clk_px2";
nvidia,function = "cldvfs";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
ulpi_clk_py0 {
nvidia,pins = "ulpi_clk_py0",
"ulpi_data0_po1",
"ulpi_data1_po2",
"ulpi_data2_po3",
"ulpi_data3_po4",
"ulpi_data4_po5",
"ulpi_data5_po6",
"ulpi_data6_po7",
"ulpi_data7_po0";
nvidia,function = "ulpi";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
ulpi_dir_py1 {
nvidia,pins = "ulpi_dir_py1",
"ulpi_nxt_py2";
nvidia,function = "ulpi";
nvidia,pull = <0>;
nvidia,tristate = <1>;
nvidia,enable-input = <1>;
};
ulpi_stp_py3 {
nvidia,pins = "ulpi_stp_py3";
nvidia,function = "ulpi";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
cam_i2c_scl_pbb1 {
nvidia,pins = "cam_i2c_scl_pbb1",
"cam_i2c_sda_pbb2";
nvidia,function = "i2c3";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
nvidia,lock = <0>;
nvidia,open-drain = <0>;
};
cam_mclk_pcc0 {
nvidia,pins = "cam_mclk_pcc0",
"pbb0";
nvidia,function = "vi_alt3";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
nvidia,lock = <0>;
};
gen2_i2c_scl_pt5 {
nvidia,pins = "gen2_i2c_scl_pt5",
"gen2_i2c_sda_pt6";
nvidia,function = "i2c2";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
nvidia,lock = <0>;
nvidia,open-drain = <0>;
};
gmi_a16_pj7 {
nvidia,pins = "gmi_a16_pj7";
nvidia,function = "uartd";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
gmi_a17_pb0 {
nvidia,pins = "gmi_a17_pb0",
"gmi_a18_pb1";
nvidia,function = "uartd";
nvidia,pull = <0>;
nvidia,tristate = <1>;
nvidia,enable-input = <1>;
};
gmi_a19_pk7 {
nvidia,pins = "gmi_a19_pk7";
nvidia,function = "uartd";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
gmi_ad5_pg5 {
nvidia,pins = "gmi_ad5_pg5",
"gmi_cs6_n_pi3",
"gmi_wr_n_pi0";
nvidia,function = "spi4";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
gmi_ad6_pg6 {
nvidia,pins = "gmi_ad6_pg6",
"gmi_ad7_pg7";
nvidia,function = "spi4";
nvidia,pull = <2>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
gmi_ad12_ph4 {
nvidia,pins = "gmi_ad12_ph4";
nvidia,function = "rsvd4";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
gmi_ad9_ph1 {
nvidia,pins = "gmi_ad9_ph1";
nvidia,function = "pwm1";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
gmi_cs1_n_pj2 {
nvidia,pins = "gmi_cs1_n_pj2",
"gmi_oe_n_pi1";
nvidia,function = "soc";
nvidia,pull = <0>;
nvidia,tristate = <1>;
nvidia,enable-input = <1>;
};
clk2_out_pw5 {
nvidia,pins = "clk2_out_pw5";
nvidia,function = "extperiph2";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
sdmmc1_clk_pz0 {
nvidia,pins = "sdmmc1_clk_pz0";
nvidia,function = "sdmmc1";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
sdmmc1_cmd_pz1 {
nvidia,pins = "sdmmc1_cmd_pz1",
"sdmmc1_dat0_py7",
"sdmmc1_dat1_py6",
"sdmmc1_dat2_py5",
"sdmmc1_dat3_py4";
nvidia,function = "sdmmc1";
nvidia,pull = <2>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
sdmmc1_wp_n_pv3 {
nvidia,pins = "sdmmc1_wp_n_pv3";
nvidia,function = "spi4";
nvidia,pull = <2>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
sdmmc3_clk_pa6 {
nvidia,pins = "sdmmc3_clk_pa6";
nvidia,function = "sdmmc3";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
sdmmc3_cmd_pa7 {
nvidia,pins = "sdmmc3_cmd_pa7",
"sdmmc3_dat0_pb7",
"sdmmc3_dat1_pb6",
"sdmmc3_dat2_pb5",
"sdmmc3_dat3_pb4",
"kb_col4_pq4",
"sdmmc3_clk_lb_out_pee4",
"sdmmc3_clk_lb_in_pee5";
nvidia,function = "sdmmc3";
nvidia,pull = <2>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
sdmmc4_clk_pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4";
nvidia,function = "sdmmc4";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
sdmmc4_cmd_pt7 {
nvidia,pins = "sdmmc4_cmd_pt7",
"sdmmc4_dat0_paa0",
"sdmmc4_dat1_paa1",
"sdmmc4_dat2_paa2",
"sdmmc4_dat3_paa3",
"sdmmc4_dat4_paa4",
"sdmmc4_dat5_paa5",
"sdmmc4_dat6_paa6",
"sdmmc4_dat7_paa7";
nvidia,function = "sdmmc4";
nvidia,pull = <2>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
clk_32k_out_pa0 {
nvidia,pins = "clk_32k_out_pa0";
nvidia,function = "blink";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
kb_col0_pq0 {
nvidia,pins = "kb_col0_pq0",
"kb_col1_pq1",
"kb_col2_pq2",
"kb_row0_pr0",
"kb_row1_pr1",
"kb_row2_pr2";
nvidia,function = "kbc";
nvidia,pull = <2>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
dap3_din_pp1 {
nvidia,pins = "dap3_din_pp1",
"dap3_sclk_pp3";
nvidia,function = "displayb";
nvidia,pull = <0>;
nvidia,tristate = <1>;
nvidia,enable-input = <0>;
};
pv0 {
nvidia,pins = "pv0";
nvidia,function = "rsvd4";
nvidia,pull = <0>;
nvidia,tristate = <1>;
nvidia,enable-input = <0>;
};
kb_row7_pr7 {
nvidia,pins = "kb_row7_pr7";
nvidia,function = "rsvd2";
nvidia,pull = <2>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
kb_row10_ps2 {
nvidia,pins = "kb_row10_ps2";
nvidia,function = "uarta";
nvidia,pull = <0>;
nvidia,tristate = <1>;
nvidia,enable-input = <1>;
};
kb_row9_ps1 {
nvidia,pins = "kb_row9_ps1";
nvidia,function = "uarta";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
pwr_i2c_scl_pz6 {
nvidia,pins = "pwr_i2c_scl_pz6",
"pwr_i2c_sda_pz7";
nvidia,function = "i2cpwr";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
nvidia,lock = <0>;
nvidia,open-drain = <0>;
};
sys_clk_req_pz5 {
nvidia,pins = "sys_clk_req_pz5";
nvidia,function = "sysclk";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
core_pwr_req {
nvidia,pins = "core_pwr_req";
nvidia,function = "pwron";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
cpu_pwr_req {
nvidia,pins = "cpu_pwr_req";
nvidia,function = "cpu";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
pwr_int_n {
nvidia,pins = "pwr_int_n";
nvidia,function = "pmi";
nvidia,pull = <0>;
nvidia,tristate = <1>;
nvidia,enable-input = <1>;
};
reset_out_n {
nvidia,pins = "reset_out_n";
nvidia,function = "reset_out_n";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
clk3_out_pee0 {
nvidia,pins = "clk3_out_pee0";
nvidia,function = "extperiph3";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
gen1_i2c_scl_pc4 {
nvidia,pins = "gen1_i2c_scl_pc4",
"gen1_i2c_sda_pc5";
nvidia,function = "i2c1";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
nvidia,lock = <0>;
nvidia,open-drain = <0>;
};
uart2_cts_n_pj5 {
nvidia,pins = "uart2_cts_n_pj5";
nvidia,function = "uartb";
nvidia,pull = <0>;
nvidia,tristate = <1>;
nvidia,enable-input = <1>;
};
uart2_rts_n_pj6 {
nvidia,pins = "uart2_rts_n_pj6";
nvidia,function = "uartb";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
uart2_rxd_pc3 {
nvidia,pins = "uart2_rxd_pc3";
nvidia,function = "irda";
nvidia,pull = <0>;
nvidia,tristate = <1>;
nvidia,enable-input = <1>;
};
uart2_txd_pc2 {
nvidia,pins = "uart2_txd_pc2";
nvidia,function = "irda";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
uart3_cts_n_pa1 {
nvidia,pins = "uart3_cts_n_pa1",
"uart3_rxd_pw7";
nvidia,function = "uartc";
nvidia,pull = <0>;
nvidia,tristate = <1>;
nvidia,enable-input = <1>;
};
uart3_rts_n_pc0 {
nvidia,pins = "uart3_rts_n_pc0",
"uart3_txd_pw6";
nvidia,function = "uartc";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
owr {
nvidia,pins = "owr";
nvidia,function = "owr";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
hdmi_cec_pee3 {
nvidia,pins = "hdmi_cec_pee3";
nvidia,function = "cec";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
nvidia,lock = <0>;
nvidia,open-drain = <0>;
};
ddc_scl_pv4 {
nvidia,pins = "ddc_scl_pv4",
"ddc_sda_pv5";
nvidia,function = "i2c4";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
nvidia,lock = <0>;
nvidia,rcv-sel = <1>;
};
spdif_in_pk6 {
nvidia,pins = "spdif_in_pk6";
nvidia,function = "usb";
nvidia,pull = <2>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
nvidia,lock = <0>;
};
usb_vbus_en0_pn4 {
nvidia,pins = "usb_vbus_en0_pn4";
nvidia,function = "usb";
nvidia,pull = <2>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
nvidia,lock = <0>;
nvidia,open-drain = <1>;
};
gpio_x6_aud_px6 {
nvidia,pins = "gpio_x6_aud_px6";
nvidia,function = "spi6";
nvidia,pull = <2>;
nvidia,tristate = <1>;
nvidia,enable-input = <1>;
};
gpio_x4_aud_px4 {
nvidia,pins = "gpio_x4_aud_px4",
"gpio_x7_aud_px7";
nvidia,function = "rsvd1";
nvidia,pull = <1>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
gpio_x5_aud_px5 {
nvidia,pins = "gpio_x5_aud_px5";
nvidia,function = "rsvd1";
nvidia,pull = <2>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
gpio_w2_aud_pw2 {
nvidia,pins = "gpio_w2_aud_pw2";
nvidia,function = "rsvd2";
nvidia,pull = <2>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
gpio_w3_aud_pw3 {
nvidia,pins = "gpio_w3_aud_pw3";
nvidia,function = "spi6";
nvidia,pull = <2>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
gpio_x1_aud_px1 {
nvidia,pins = "gpio_x1_aud_px1";
nvidia,function = "rsvd4";
nvidia,pull = <1>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
gpio_x3_aud_px3 {
nvidia,pins = "gpio_x3_aud_px3";
nvidia,function = "rsvd4";
nvidia,pull = <2>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
dap3_fs_pp0 {
nvidia,pins = "dap3_fs_pp0";
nvidia,function = "i2s2";
nvidia,pull = <1>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
dap3_dout_pp2 {
nvidia,pins = "dap3_dout_pp2";
nvidia,function = "i2s2";
nvidia,pull = <1>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
pv1 {
nvidia,pins = "pv1";
nvidia,function = "rsvd1";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
pbb3 {
nvidia,pins = "pbb3",
"pbb5",
"pbb6",
"pbb7";
nvidia,function = "rsvd4";
nvidia,pull = <1>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
pcc1 {
nvidia,pins = "pcc1",
"pcc2";
nvidia,function = "rsvd4";
nvidia,pull = <1>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
gmi_ad0_pg0 {
nvidia,pins = "gmi_ad0_pg0",
"gmi_ad1_pg1";
nvidia,function = "gmi";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
gmi_ad10_ph2 {
nvidia,pins = "gmi_ad10_ph2",
"gmi_ad11_ph3",
"gmi_ad13_ph5",
"gmi_ad8_ph0",
"gmi_clk_pk1";
nvidia,function = "gmi";
nvidia,pull = <1>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
gmi_ad2_pg2 {
nvidia,pins = "gmi_ad2_pg2",
"gmi_ad3_pg3";
nvidia,function = "gmi";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
gmi_adv_n_pk0 {
nvidia,pins = "gmi_adv_n_pk0",
"gmi_cs0_n_pj0",
"gmi_cs2_n_pk3",
"gmi_cs4_n_pk2",
"gmi_cs7_n_pi6",
"gmi_dqs_p_pj3",
"gmi_iordy_pi5",
"gmi_wp_n_pc7";
nvidia,function = "gmi";
nvidia,pull = <2>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
gmi_cs3_n_pk4 {
nvidia,pins = "gmi_cs3_n_pk4";
nvidia,function = "gmi";
nvidia,pull = <2>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
clk2_req_pcc5 {
nvidia,pins = "clk2_req_pcc5";
nvidia,function = "rsvd4";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
kb_col3_pq3 {
nvidia,pins = "kb_col3_pq3",
"kb_col6_pq6",
"kb_col7_pq7";
nvidia,function = "kbc";
nvidia,pull = <2>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
kb_col5_pq5 {
nvidia,pins = "kb_col5_pq5";
nvidia,function = "kbc";
nvidia,pull = <2>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
kb_row3_pr3 {
nvidia,pins = "kb_row3_pr3",
"kb_row4_pr4",
"kb_row6_pr6",
"kb_row8_ps0";
nvidia,function = "kbc";
nvidia,pull = <1>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
clk3_req_pee1 {
nvidia,pins = "clk3_req_pee1";
nvidia,function = "rsvd4";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
pu4 {
nvidia,pins = "pu4";
nvidia,function = "displayb";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <0>;
};
pu5 {
nvidia,pins = "pu5",
"pu6";
nvidia,function = "displayb";
nvidia,pull = <0>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
hdmi_int_pn7 {
nvidia,pins = "hdmi_int_pn7";
nvidia,function = "rsvd1";
nvidia,pull = <1>;
nvidia,tristate = <0>;
nvidia,enable-input = <1>;
};
clk1_req_pee2 {
nvidia,pins = "clk1_req_pee2",
"usb_vbus_en1_pn5";
nvidia,function = "rsvd4";
nvidia,pull = <1>;
nvidia,tristate = <1>;
nvidia,enable-input = <0>;
};
drive_sdio1 {
nvidia,pins = "drive_sdio1";
nvidia,high-speed-mode = <1>;
nvidia,schmitt = <0>;
nvidia,low-power-mode = <3>;
nvidia,pull-down-strength = <36>;
nvidia,pull-up-strength = <20>;
nvidia,slew-rate-rising = <2>;
nvidia,slew-rate-falling = <2>;
};
drive_sdio3 {
nvidia,pins = "drive_sdio3";
nvidia,high-speed-mode = <1>;
nvidia,schmitt = <0>;
nvidia,low-power-mode = <3>;
nvidia,pull-down-strength = <22>;
nvidia,pull-up-strength = <36>;
nvidia,slew-rate-rising = <0>;
nvidia,slew-rate-falling = <0>;
};
drive_gma {
nvidia,pins = "drive_gma";
nvidia,high-speed-mode = <1>;
nvidia,schmitt = <0>;
nvidia,low-power-mode = <3>;
nvidia,pull-down-strength = <2>;
nvidia,pull-up-strength = <1>;
nvidia,slew-rate-rising = <0>;
nvidia,slew-rate-falling = <0>;
nvidia,drive-type = <1>;
};
};
};
ARM: dt: tegra114: Add new board, Dalmore Add a new evaluation board, Dalmore for Tegra 114 family. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-24 01:10:24 +00:00
serial@70006300 {
status = "okay";
};
ARM: tegra: Add sbs-battery node to Dalmore This patch adds the node for the bq20z45 I2C gas gauge which is compatible with the sbs-battery power supply driver. Signed-off-by: Rhyland Klein <rklein@nvidia.com> [swarren: remove unit-address from node name since it's unique already] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-20 11:31:32 -04:00
i2c@7000c000 {
status = "okay";
clock-frequency = <100000>;
battery: smart-battery {
compatible = "ti,bq20z45", "sbs,sbs-battery";
reg = <0xb>;
battery-name = "battery";
sbs,i2c-retry-count = <2>;
sbs,poll-retry-count = <100>;
ARM: tegra: add power-supplies link between battery and charger The power supply core now supports detecting linkages between batteries and chargers through the use of the power-supplies property. Adding this to the battery, the core will use the phandle list to find the associated charger and pair them up. This facilitates notifications from the charger to the battery when ac power is dissconnected or connected for instance. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-06-10 17:26:42 -04:00
power-supplies = <&charger>;
ARM: tegra: Add sbs-battery node to Dalmore This patch adds the node for the bq20z45 I2C gas gauge which is compatible with the sbs-battery power supply driver. Signed-off-by: Rhyland Klein <rklein@nvidia.com> [swarren: remove unit-address from node name since it's unique already] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-20 11:31:32 -04:00
};
ARM: tegra: enable audio on Dalmore Dalmore uses the RT5640 audio CODEC. Instantiate this on the I2C bus. Enable the relevant Tegra I2C controller. Add the top-level "sound" node to hook everything together, and provide a "sound card" device. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-12 17:03:42 -06:00
rt5640: rt5640 {
compatible = "realtek,rt5640";
reg = <0x1c>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
realtek,ldo1-en-gpios =
<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
};
ARM: tegra: add DT entry for nct1008 to Dalmore Enable thermal sensor nct1008 for Tegra114 dalmore. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-07 17:28:28 +08:00
temperature-sensor@4c {
compatible = "onnn,nct1008";
reg = <0x4c>;
vcc-supply = <&palmas_ldo6_reg>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
};
ARM: tegra: Add sbs-battery node to Dalmore This patch adds the node for the bq20z45 I2C gas gauge which is compatible with the sbs-battery power supply driver. Signed-off-by: Rhyland Klein <rklein@nvidia.com> [swarren: remove unit-address from node name since it's unique already] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-20 11:31:32 -04:00
};
ARM: tegra: dalmore: add cpu regulator node Dalmore uses the TPS51632 as CPU regulator. The device is connected on I2C5. Add DT node for TPS51632. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 19:17:40 +05:30
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
tps51632 {
compatible = "ti,tps51632";
reg = <0x43>;
regulator-name = "vdd-cpu";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1520000>;
regulator-boot-on;
regulator-always-on;
};
ARM: tegra: dalmore: add TPS65090 node NVIDIA's Tegra114 reference platform, Dalmore, uses the TPS65090 as secondary PMICs which is mainly act as voltage switch regulator controlled by i2c communication. Add DT node for TPS65090. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren: remove unit-address from node name since it's unique already] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 19:17:41 +05:30
tps65090 {
compatible = "ti,tps65090";
reg = <0x48>;
interrupt-parent = <&gpio>;
ARM: tegra: convert device tree files to use IRQ defines Use the GIC and standard IRQ binding defines in all IRQ specifiers. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-13 12:51:51 -07:00
interrupts = <TEGRA_GPIO(J, 0) IRQ_TYPE_LEVEL_HIGH>;
ARM: tegra: dalmore: add TPS65090 node NVIDIA's Tegra114 reference platform, Dalmore, uses the TPS65090 as secondary PMICs which is mainly act as voltage switch regulator controlled by i2c communication. Add DT node for TPS65090. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren: remove unit-address from node name since it's unique already] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 19:17:41 +05:30
vsys1-supply = <&vdd_ac_bat_reg>;
vsys2-supply = <&vdd_ac_bat_reg>;
vsys3-supply = <&vdd_ac_bat_reg>;
infet1-supply = <&vdd_ac_bat_reg>;
infet2-supply = <&vdd_ac_bat_reg>;
infet3-supply = <&tps65090_dcdc2_reg>;
infet4-supply = <&tps65090_dcdc2_reg>;
infet5-supply = <&tps65090_dcdc2_reg>;
infet6-supply = <&tps65090_dcdc2_reg>;
infet7-supply = <&tps65090_dcdc2_reg>;
vsys-l1-supply = <&vdd_ac_bat_reg>;
vsys-l2-supply = <&vdd_ac_bat_reg>;
ARM: tegra: add power-supplies link between battery and charger The power supply core now supports detecting linkages between batteries and chargers through the use of the power-supplies property. Adding this to the battery, the core will use the phandle list to find the associated charger and pair them up. This facilitates notifications from the charger to the battery when ac power is dissconnected or connected for instance. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-06-10 17:26:42 -04:00
charger: charger {
ARM: tegra: Add charger subnode to tps65090 node The charger is now represented by a distinct subnode of the tps65090 device. Add this node and enable low current charging with it. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-10 09:51:45 +00:00
compatible = "ti,tps65090-charger";
ti,enable-low-current-chrg;
};
ARM: tegra: dalmore: add TPS65090 node NVIDIA's Tegra114 reference platform, Dalmore, uses the TPS65090 as secondary PMICs which is mainly act as voltage switch regulator controlled by i2c communication. Add DT node for TPS65090. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren: remove unit-address from node name since it's unique already] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 19:17:41 +05:30
regulators {
ARM: tegra: dalmore: add fixed regulator node NVIDIA's Tegra114 reference platform Dalmore has voltage switch regulators which are controlled by the Tegra GPIOs. Add DT node for fixed regulators. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 19:17:42 +05:30
tps65090_dcdc1_reg: dcdc1 {
ARM: tegra: dalmore: add TPS65090 node NVIDIA's Tegra114 reference platform, Dalmore, uses the TPS65090 as secondary PMICs which is mainly act as voltage switch regulator controlled by i2c communication. Add DT node for TPS65090. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren: remove unit-address from node name since it's unique already] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 19:17:41 +05:30
regulator-name = "vdd-sys-5v0";
regulator-always-on;
regulator-boot-on;
};
tps65090_dcdc2_reg: dcdc2 {
regulator-name = "vdd-sys-3v3";
regulator-always-on;
regulator-boot-on;
};
ARM: tegra: enable palmas device for dalmore Make the entry of Dalmore Power Management Unit device TPS65913 in dalmore DTS file. The Palma driver support this device. Enable following submodule of the TPS65913: - GPIO driver - RTC driver. - Power regulator driver. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren, fixed indentation and DT node sort order] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 07:43:11 +05:30
tps65090_dcdc3_reg: dcdc3 {
ARM: tegra: dalmore: add TPS65090 node NVIDIA's Tegra114 reference platform, Dalmore, uses the TPS65090 as secondary PMICs which is mainly act as voltage switch regulator controlled by i2c communication. Add DT node for TPS65090. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren: remove unit-address from node name since it's unique already] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 19:17:41 +05:30
regulator-name = "vdd-ao";
regulator-always-on;
regulator-boot-on;
};
fet1 {
regulator-name = "vdd-lcd-bl";
};
fet3 {
regulator-name = "vdd-modem-3v3";
};
fet4 {
regulator-name = "avdd-lcd";
};
fet5 {
regulator-name = "vdd-lvds";
};
fet6 {
regulator-name = "vdd-sd-slot";
ARM: tegra: keep power on to SD slot on Dalmore Set "regulator-always-on" for the SD slot on Dalmore, so that SD cards work. This used to work, since this regulator is on by default, but was broken by commit "ARM: tegra: dalmore: add TPS65090 node", since that didn't specify always-on for this regulator. In the long run, the regulators should all be hooked up to the SDHCI device nodes. However, we haven't done that for any of the Tegra boards yet, so to be consistent, this patch simply forces the regulator on, rather than hooking it up and making it work differently to other boards. Reported-by: Rhyland Klein <rklein@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-28 13:22:30 -06:00
regulator-always-on;
ARM: tegra: dalmore: add TPS65090 node NVIDIA's Tegra114 reference platform, Dalmore, uses the TPS65090 as secondary PMICs which is mainly act as voltage switch regulator controlled by i2c communication. Add DT node for TPS65090. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren: remove unit-address from node name since it's unique already] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 19:17:41 +05:30
regulator-boot-on;
};
fet7 {
regulator-name = "vdd-com-3v3";
};
ldo1 {
regulator-name = "vdd-sby-5v0";
regulator-always-on;
regulator-boot-on;
};
ldo2 {
regulator-name = "vdd-sby-3v3";
regulator-always-on;
regulator-boot-on;
};
};
};
ARM: tegra: enable palmas device for dalmore Make the entry of Dalmore Power Management Unit device TPS65913 in dalmore DTS file. The Palma driver support this device. Enable following submodule of the TPS65913: - GPIO driver - RTC driver. - Power regulator driver. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren, fixed indentation and DT node sort order] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 07:43:11 +05:30
palmas: tps65913 {
compatible = "ti,palmas";
reg = <0x58>;
ARM: tegra: dalmore: fix the irq trigger type of Palmas MFD device The IRQ trigger type of Palmas MFD device (tps65913) is designed as low-level sensitive on Dalmore. The wrong configuration would cause an interrupt storm when booting the system. Fixing it in DT with appropriate interrupt type. Cc: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-01 17:37:45 +08:00
interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
ARM: tegra: enable palmas device for dalmore Make the entry of Dalmore Power Management Unit device TPS65913 in dalmore DTS file. The Palma driver support this device. Enable following submodule of the TPS65913: - GPIO driver - RTC driver. - Power regulator driver. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren, fixed indentation and DT node sort order] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 07:43:11 +05:30
#interrupt-cells = <2>;
interrupt-controller;
ARM: tegra: configure power off for Dalmore Add DT property to tell the regulator to register pm_power_off to make "shutdown" work. Signed-off-by: Bill Huang <bilhuang@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-08-19 10:44:10 -06:00
ti,system-power-controller;
ARM: tegra: enable palmas device for dalmore Make the entry of Dalmore Power Management Unit device TPS65913 in dalmore DTS file. The Palma driver support this device. Enable following submodule of the TPS65913: - GPIO driver - RTC driver. - Power regulator driver. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren, fixed indentation and DT node sort order] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 07:43:11 +05:30
palmas_gpio: gpio {
compatible = "ti,palmas-gpio";
gpio-controller;
#gpio-cells = <2>;
};
pmic {
compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
smps1-in-supply = <&tps65090_dcdc3_reg>;
smps3-in-supply = <&tps65090_dcdc3_reg>;
smps4-in-supply = <&tps65090_dcdc2_reg>;
smps7-in-supply = <&tps65090_dcdc2_reg>;
smps8-in-supply = <&tps65090_dcdc2_reg>;
smps9-in-supply = <&tps65090_dcdc2_reg>;
ldo1-in-supply = <&tps65090_dcdc2_reg>;
ldo2-in-supply = <&tps65090_dcdc2_reg>;
ldo3-in-supply = <&palmas_smps3_reg>;
ldo4-in-supply = <&tps65090_dcdc2_reg>;
ldo5-in-supply = <&vdd_ac_bat_reg>;
ldo6-in-supply = <&tps65090_dcdc2_reg>;
ldo7-in-supply = <&tps65090_dcdc2_reg>;
ldo8-in-supply = <&tps65090_dcdc3_reg>;
ldo9-in-supply = <&palmas_smps9_reg>;
ldoln-in-supply = <&tps65090_dcdc1_reg>;
ldousb-in-supply = <&tps65090_dcdc1_reg>;
regulators {
smps12 {
regulator-name = "vddio-ddr";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
palmas_smps3_reg: smps3 {
regulator-name = "vddio-1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
smps45 {
regulator-name = "vdd-core";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
};
smps457 {
regulator-name = "vdd-core";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
};
smps8 {
regulator-name = "avdd-pll";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
regulator-always-on;
regulator-boot-on;
};
palmas_smps9_reg: smps9 {
regulator-name = "sdhci-vdd-sd-slot";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
ldo1 {
regulator-name = "avdd-cam1";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo2 {
regulator-name = "avdd-cam2";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo3 {
regulator-name = "avdd-dsi-csi";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
};
ldo4 {
regulator-name = "vpp-fuse";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ARM: tegra: add DT entry for nct1008 to Dalmore Enable thermal sensor nct1008 for Tegra114 dalmore. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-07 17:28:28 +08:00
palmas_ldo6_reg: ldo6 {
ARM: tegra: enable palmas device for dalmore Make the entry of Dalmore Power Management Unit device TPS65913 in dalmore DTS file. The Palma driver support this device. Enable following submodule of the TPS65913: - GPIO driver - RTC driver. - Power regulator driver. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren, fixed indentation and DT node sort order] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 07:43:11 +05:30
regulator-name = "vdd-sensor-2v85";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
ldo7 {
regulator-name = "vdd-af-cam1";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo8 {
regulator-name = "vdd-rtc";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-always-on;
regulator-boot-on;
ti,enable-ldo8-tracking;
};
ldo9 {
regulator-name = "vddio-sdmmc-2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
ldoln {
regulator-name = "hvdd-usb";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldousb {
regulator-name = "avdd-usb";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
regen1 {
regulator-name = "rail-3v3";
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
regen2 {
regulator-name = "rail-5v0";
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
};
};
rtc {
compatible = "ti,palmas-rtc";
interrupt-parent = <&palmas>;
interrupts = <8 0>;
};
ARM: tegra: add palmas pincontrol to Dalmore device tree Add Palmas pincontrol to Dalmore device tree and make following configuration as default: - Disable DVFS1 and DVFS2. - Set GPIO6 to gpio mode. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-09-18 18:37:22 +05:30
pinmux {
compatible = "ti,tps65913-pinctrl";
pinctrl-names = "default";
pinctrl-0 = <&palmas_default>;
palmas_default: pinmux {
pin_gpio6 {
pins = "gpio6";
function = "gpio";
};
};
};
ARM: tegra: enable palmas device for dalmore Make the entry of Dalmore Power Management Unit device TPS65913 in dalmore DTS file. The Palma driver support this device. Enable following submodule of the TPS65913: - GPIO driver - RTC driver. - Power regulator driver. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren, fixed indentation and DT node sort order] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 07:43:11 +05:30
};
ARM: tegra: dalmore: add cpu regulator node Dalmore uses the TPS51632 as CPU regulator. The device is connected on I2C5. Add DT node for TPS51632. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 19:17:40 +05:30
};
ARM: tegra: enable spi4 on Dalmore Enable SPI4 and add Winbond SPI flash W25Q32DW device on CS0 line. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-17 17:03:28 -06:00
spi@7000da00 {
status = "okay";
spi-max-frequency = <25000000>;
spi-flash@0 {
compatible = "winbond,w25q32dw";
reg = <0>;
spi-max-frequency = <20000000>;
};
};
ARM: dt: tegra114: Add new board, Dalmore Add a new evaluation board, Dalmore for Tegra 114 family. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-24 01:10:24 +00:00
pmc {
nvidia,invert-interrupt;
ARM: tegra: enable LP1 suspend mode Enabling the LP1 suspend mode for Tegra devices. Tested-by: Marc Dietrich <marvin24@gmx.de> # paz00 board Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12 17:40:07 +08:00
nvidia,suspend-mode = <1>;
ARM: tegra: dalmore: add PM configurations for PMC Adding the PM configurations for PMC to support platform suspend. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-03 17:50:47 +08:00
nvidia,cpu-pwr-good-time = <500>;
nvidia,cpu-pwr-off-time = <300>;
nvidia,core-pwr-good-time = <641 3845>;
nvidia,core-pwr-off-time = <61036>;
nvidia,core-power-req-active-high;
nvidia,sys-clock-req-active-high;
ARM: dt: tegra114: Add new board, Dalmore Add a new evaluation board, Dalmore for Tegra 114 family. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-24 01:10:24 +00:00
};
ARM: tegra: add clock source of PMC to device trees Adding the bindings of the clock source of PMC in DT. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-03 19:31:27 +08:00
ARM: tegra: enable audio on Dalmore Dalmore uses the RT5640 audio CODEC. Instantiate this on the I2C bus. Enable the relevant Tegra I2C controller. Add the top-level "sound" node to hook everything together, and provide a "sound card" device. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-12 17:03:42 -06:00
ahub {
i2s@70080400 {
status = "okay";
};
};
ARM: tegra: add SDHCI support for Dalmore Dalmore has a built-in eMMC device and a user-accessible SD card slot. Add device tree nodes to enable these. Based on changes by: Pritesh Raithatha <praithatha@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> [swarren: added commit description, fixed DT node sort order] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-20 13:35:15 -05:00
sdhci@78000400 {
ARM: tegra: convert device tree files to use GPIO defines Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-12 17:25:15 -07:00
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
ARM: tegra: add SDHCI support for Dalmore Dalmore has a built-in eMMC device and a user-accessible SD card slot. Add device tree nodes to enable these. Based on changes by: Pritesh Raithatha <praithatha@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> [swarren: added commit description, fixed DT node sort order] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-20 13:35:15 -05:00
bus-width = <4>;
status = "okay";
};
sdhci@78000600 {
bus-width = <8>;
status = "okay";
ARM: tegra: add non-removable and keep-power-in-suspend property for MMC This patch adds "non-removable" property of MMC host where the eMMC device is for Tegra platform. And the "keep-power-in-suspend" property was used for the SDIO device that need this to go into suspend mode (e.g. BRCM43xx series). Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-03 14:34:39 -06:00
non-removable;
ARM: tegra: add SDHCI support for Dalmore Dalmore has a built-in eMMC device and a user-accessible SD card slot. Add device tree nodes to enable these. Based on changes by: Pritesh Raithatha <praithatha@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> [swarren: added commit description, fixed DT node sort order] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-20 13:35:15 -05:00
};
ARM: tegra: add USB DT entries for Tegra114, Dalmore Device tree entries for the three EHCI controllers on Tegra114. Enables the the third controller (USB host) on Dalmore. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-01 18:00:18 +03:00
usb@7d008000 {
status = "okay";
};
usb-phy@7d008000 {
status = "okay";
vbus-supply = <&usb3_vbus_reg>;
};
ARM: tegra: add clock source of PMC to device trees Adding the bindings of the clock source of PMC in DT. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-03 19:31:27 +08:00
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
ARM: tegra: dalmore: add TPS65090 node NVIDIA's Tegra114 reference platform, Dalmore, uses the TPS65090 as secondary PMICs which is mainly act as voltage switch regulator controlled by i2c communication. Add DT node for TPS65090. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren: remove unit-address from node name since it's unique already] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 19:17:41 +05:30
ARM: tegra: enable gpio-keys on Dalmore Dalmore have the keys mounted on board which are connected to different pins of Tegra. Add the keys entry in DTS file to enable key functionality. This will enable KEY_POWER, KEY_HOME, KEY_VOLUMEUP and KEY_VOLUMEDOWN. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-10 12:30:43 +05:30
gpio-keys {
compatible = "gpio-keys";
home {
label = "Home";
gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
ARM: tegra: use dt-binding header for key code In place of hardcoding the key code in DTS file and comment the key code as side notes, use the key code macro defines in the dt-bindings/input/input.h directly. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-09-18 18:52:32 +05:30
linux,code = <KEY_HOME>;
ARM: tegra: enable gpio-keys on Dalmore Dalmore have the keys mounted on board which are connected to different pins of Tegra. Add the keys entry in DTS file to enable key functionality. This will enable KEY_POWER, KEY_HOME, KEY_VOLUMEUP and KEY_VOLUMEDOWN. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-10 12:30:43 +05:30
};
power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
ARM: tegra: use dt-binding header for key code In place of hardcoding the key code in DTS file and comment the key code as side notes, use the key code macro defines in the dt-bindings/input/input.h directly. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-09-18 18:52:32 +05:30
linux,code = <KEY_POWER>;
ARM: tegra: enable gpio-keys on Dalmore Dalmore have the keys mounted on board which are connected to different pins of Tegra. Add the keys entry in DTS file to enable key functionality. This will enable KEY_POWER, KEY_HOME, KEY_VOLUMEUP and KEY_VOLUMEDOWN. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-10 12:30:43 +05:30
gpio-key,wakeup;
};
volume_down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
ARM: tegra: use dt-binding header for key code In place of hardcoding the key code in DTS file and comment the key code as side notes, use the key code macro defines in the dt-bindings/input/input.h directly. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-09-18 18:52:32 +05:30
linux,code = <KEY_VOLUMEDOWN>;
ARM: tegra: enable gpio-keys on Dalmore Dalmore have the keys mounted on board which are connected to different pins of Tegra. Add the keys entry in DTS file to enable key functionality. This will enable KEY_POWER, KEY_HOME, KEY_VOLUMEUP and KEY_VOLUMEDOWN. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-10 12:30:43 +05:30
};
volume_up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
ARM: tegra: use dt-binding header for key code In place of hardcoding the key code in DTS file and comment the key code as side notes, use the key code macro defines in the dt-bindings/input/input.h directly. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-09-18 18:52:32 +05:30
linux,code = <KEY_VOLUMEUP>;
ARM: tegra: enable gpio-keys on Dalmore Dalmore have the keys mounted on board which are connected to different pins of Tegra. Add the keys entry in DTS file to enable key functionality. This will enable KEY_POWER, KEY_HOME, KEY_VOLUMEUP and KEY_VOLUMEDOWN. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-10 12:30:43 +05:30
};
};
ARM: tegra: dalmore: add TPS65090 node NVIDIA's Tegra114 reference platform, Dalmore, uses the TPS65090 as secondary PMICs which is mainly act as voltage switch regulator controlled by i2c communication. Add DT node for TPS65090. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren: remove unit-address from node name since it's unique already] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 19:17:41 +05:30
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
vdd_ac_bat_reg: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "vdd_ac_bat";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
ARM: tegra: dalmore: add fixed regulator node NVIDIA's Tegra114 reference platform Dalmore has voltage switch regulators which are controlled by the Tegra GPIOs. Add DT node for fixed regulators. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 19:17:42 +05:30
dvdd_ts_reg: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "dvdd_ts";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
enable-active-high;
ARM: tegra: convert device tree files to use GPIO defines Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-12 17:25:15 -07:00
gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
ARM: tegra: dalmore: add fixed regulator node NVIDIA's Tegra114 reference platform Dalmore has voltage switch regulators which are controlled by the Tegra GPIOs. Add DT node for fixed regulators. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 19:17:42 +05:30
};
lcd_bl_en_reg: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "lcd_bl_en";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
ARM: tegra: convert device tree files to use GPIO defines Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-12 17:25:15 -07:00
gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
ARM: tegra: dalmore: add fixed regulator node NVIDIA's Tegra114 reference platform Dalmore has voltage switch regulators which are controlled by the Tegra GPIOs. Add DT node for fixed regulators. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 19:17:42 +05:30
};
usb1_vbus_reg: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
ARM: tegra: convert device tree files to use GPIO defines Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-12 17:25:15 -07:00
gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
ARM: tegra: dalmore: add fixed regulator node NVIDIA's Tegra114 reference platform Dalmore has voltage switch regulators which are controlled by the Tegra GPIOs. Add DT node for fixed regulators. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 19:17:42 +05:30
gpio-open-drain;
vin-supply = <&tps65090_dcdc1_reg>;
};
usb3_vbus_reg: regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
regulator-name = "usb2_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
ARM: tegra: convert device tree files to use GPIO defines Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-12 17:25:15 -07:00
gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
ARM: tegra: dalmore: add fixed regulator node NVIDIA's Tegra114 reference platform Dalmore has voltage switch regulators which are controlled by the Tegra GPIOs. Add DT node for fixed regulators. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 19:17:42 +05:30
gpio-open-drain;
vin-supply = <&tps65090_dcdc1_reg>;
};
vdd_hdmi_reg: regulator@5 {
compatible = "regulator-fixed";
reg = <5>;
regulator-name = "vdd_hdmi_5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
ARM: tegra: convert device tree files to use GPIO defines Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-12 17:25:15 -07:00
gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
ARM: tegra: dalmore: add fixed regulator node NVIDIA's Tegra114 reference platform Dalmore has voltage switch regulators which are controlled by the Tegra GPIOs. Add DT node for fixed regulators. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 19:17:42 +05:30
vin-supply = <&tps65090_dcdc1_reg>;
};
ARM: tegra: enable palmas device for dalmore Make the entry of Dalmore Power Management Unit device TPS65913 in dalmore DTS file. The Palma driver support this device. Enable following submodule of the TPS65913: - GPIO driver - RTC driver. - Power regulator driver. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren, fixed indentation and DT node sort order] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 07:43:11 +05:30
vdd_cam_1v8_reg: regulator@6 {
compatible = "regulator-fixed";
reg = <6>;
regulator-name = "vdd_cam_1v8_reg";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
enable-active-high;
gpio = <&palmas_gpio 6 0>;
};
ARM: tegra: dalmore: add TPS65090 node NVIDIA's Tegra114 reference platform, Dalmore, uses the TPS65090 as secondary PMICs which is mainly act as voltage switch regulator controlled by i2c communication. Add DT node for TPS65090. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren: remove unit-address from node name since it's unique already] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 19:17:41 +05:30
};
ARM: tegra: enable audio on Dalmore Dalmore uses the RT5640 audio CODEC. Instantiate this on the I2C bus. Enable the relevant Tegra I2C controller. Add the top-level "sound" node to hook everything together, and provide a "sound card" device. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-12 17:03:42 -06:00
sound {
compatible = "nvidia,tegra-audio-rt5640-dalmore",
"nvidia,tegra-audio-rt5640";
nvidia,model = "NVIDIA Tegra Dalmore";
nvidia,audio-routing =
"Headphones", "HPOR",
"Headphones", "HPOL",
"Speakers", "SPORP",
"Speakers", "SPORN",
"Speakers", "SPOLP",
ARM: tegra: add Mic Jack to Dalmore device tree This enables the microphone input jack, and hence allows audio to be captured as well as played back. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-14 14:22:19 -06:00
"Speakers", "SPOLN",
"Mic Jack", "MICBIAS1",
"IN2P", "Mic Jack";
ARM: tegra: enable audio on Dalmore Dalmore uses the RT5640 audio CODEC. Instantiate this on the I2C bus. Enable the relevant Tegra I2C controller. Add the top-level "sound" node to hook everything together, and provide a "sound card" device. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-12 17:03:42 -06:00
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&rt5640>;
nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_PLL_A>,
<&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
<&tegra_car TEGRA114_CLK_EXTERN1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
ARM: dt: tegra114: Add new board, Dalmore Add a new evaluation board, Dalmore for Tegra 114 family. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-24 01:10:24 +00:00
};
Reference in a new issue Copy permalink