forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
linux-pinenote/sound/pci/hda/patch_realtek.c

3937 lines
111 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* Universal Interface for Intel High Definition Audio Codec
*
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
* HD audio interface patch for Realtek ALC codecs
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
*
[ALSA] hda-codec - Add the support of ALC262,ALC883,ALC885,ALC861 Modules: HDA Codec driver,HDA generic driver This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver More models and improvements for ALC880, ALC260 and ALC882 codecs, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-12-05 19:42:22 +01:00
* Copyright (c) 2004 Kailang Yang <kailang@realtek.com.tw>
* PeiSen Hou <pshou@realtek.com.tw>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
* Takashi Iwai <tiwai@suse.de>
Email/web address change This patch updates Jonathan Woithe's contact details across the kernel tree. Signed-off-by: Jonathan Woithe <jwoithe@just42.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-27 13:01:01 +10:30
* Jonathan Woithe <jwoithe@just42.net>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
*
* This driver is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This driver is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pci.h>
ALSA: hda/realtek - Generic mute LED implementation for HP laptops As David Henningsson recently suggested, some HP laptops use an unused mic pin for controlling a mute LED, and this information is provided via DMI string "HP_Mute_LED_X_Y" string. This patch adds the generic support for such cases, as we've already done in patch_sigmatel.c. This is applied generically to all devices with ID 0x103c. But as we don't know whether the device 103c:1586 really contains HP_Mute_LED_X_Y DMI string, still keep the static setup for this device using the mic2 pin 0x19. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:33:58 +01:00
#include <linux/dmi.h>
sound: Add module.h to the previously silent sound users Lots of sound drivers were getting module.h via the implicit presence of it in <linux/device.h> but we are going to clean that up. So fix up those users now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-15 12:38:28 -04:00
#include <linux/module.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#include <sound/core.h>
ALSA: hda - Add input jack layer support to Realtek codec Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-14 23:22:00 +02:00
#include <sound/jack.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#include "hda_codec.h"
#include "hda_local.h"
ALSA: hda - Move up the fixup helper functions to the library module Move the fixup helper functions in patch_realtek.c to hda_auto_parser.c so that they can be used in other codec drivers like patch_conexant.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 17:17:32 +02:00
#include "hda_auto_parser.h"
ALSA: hda: Add digital beep generator support for Realtek codecs. A digital beep generator can be used via input layer. Signed-off-by: Kusanagi Kouichi <slash@ma.neweb.ne.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05 00:00:58 +09:00
#include "hda_beep.h"
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27 22:12:46 +02:00
#include "hda_jack.h"
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
#include "hda_generic.h"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/* unsol event tags */
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
#define ALC_DCVOL_EVENT 0x08
ALSA: hda - Add missing ALC680_* definitions Also update the documentation. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-23 17:51:26 +02:00
[ALSA] hda-codec - Add the support of ALC262,ALC883,ALC885,ALC861 Modules: HDA Codec driver,HDA generic driver This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver More models and improvements for ALC880, ALC260 and ALC882 codecs, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-12-05 19:42:22 +01:00
/* for GPIO Poll */
#define GPIO_MASK 0x03
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
/* extra amp-initialization sequence types */
enum {
ALC_INIT_NONE,
ALC_INIT_DEFAULT,
ALC_INIT_GPIO1,
ALC_INIT_GPIO2,
ALC_INIT_GPIO3,
};
ALSA: hda - Add parse customize define function for Realtek codecs Added alc_auto_parse_customize_define() to parse the Realtek-specific attributes from SKU. Also enable beep controls only when the proper attribute bit is set. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-19 11:23:45 +01:00
struct alc_customize_define {
unsigned int sku_cfg;
unsigned char port_connectivity;
unsigned char check_sum;
unsigned char customization;
unsigned char external_amp;
unsigned int enable_pcbeep:1;
unsigned int platform_type:1;
unsigned int swap:1;
unsigned int override:1;
ALSA: HDA: Enable SKU quirks for Realtek Realtek have ways of specifying external amps and more via a special nid or via the Codec's subsystem ID, this is called "SKU". The computer manufacturer sometimes gets this wrong, so we need to be able to override or ignore the SKU customization value. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-14 14:50:18 +02:00
unsigned int fixup:1; /* Means that this sku is set by driver, not read from hw */
ALSA: hda - Add parse customize define function for Realtek codecs Added alc_auto_parse_customize_define() to parse the Realtek-specific attributes from SKU. Also enable beep controls only when the proper attribute bit is set. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-19 11:23:45 +01:00
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
struct alc_spec {
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
struct hda_gen_spec gen; /* must be at head */
ALSA: hda - Move up the fixup helper functions to the library module Move the fixup helper functions in patch_realtek.c to hda_auto_parser.c so that they can be used in other codec drivers like patch_conexant.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 17:17:32 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* codec parameterization */
ALSA: hda - Constify fixup and other array data in patch_realtek.c Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02 11:30:18 +02:00
const struct snd_kcontrol_new *mixers[5]; /* mixer arrays */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
unsigned int num_mixers;
ALSA: hda - Create beep mixer controls dynamically for Realtek codecs Create beep mixer controls dynamically for Realtek codecs instead of static arrays. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-06 16:11:25 +01:00
unsigned int beep_amp; /* beep amp value, set via set_beep_amp() */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ALSA: hda - Add parse customize define function for Realtek codecs Added alc_auto_parse_customize_define() to parse the Realtek-specific attributes from SKU. Also enable beep controls only when the proper attribute bit is set. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-19 11:23:45 +01:00
struct alc_customize_define cdefine;
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
unsigned int parse_flags; /* flag for snd_hda_parse_pin_defcfg() */
[ALSA] hda-codec - Fix ALC262 for Fujitsu laptop Modules: HDA Codec driver,HDA generic driver Add 'fujitsu' model for ALC262 patch to support a FSC laptop. The internal speaker is turned on/off with jack sensing. Also fixed alc262 'basic' model. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-01 14:16:17 +01:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
/* inverted dmic fix */
unsigned int inv_dmic_fixup:1; /* has inverted digital-mic workaround */
unsigned int inv_dmic_muted:1; /* R-ch of inv d-mic is muted? */
ALSA: hda - Add the inverted digital mic workaround to Realtek codecs Some laptops are equipped with ForteMedia digital mics that give the differential input. With such devices, summing stereo streams into a mono (like PulseAudio does) results in almost silence. This patch provides a workaround for this bug by adding a new mixer switch to turn on/off the right channel of digital mic, just like a similar fix for Conexant codecs. When the new switch "Inverted Internal Mic Capture Switch" is off and the current input source is the digital mic, the right channel of the recording stream is muted. When another input source is selected, the right channel is restored. Tested-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-22 14:30:29 +02:00
hda_nid_t inv_dmic_pin;
[ALSA] hda-codec - Fix ALC262 for Fujitsu laptop Modules: HDA Codec driver,HDA generic driver Add 'fujitsu' model for ALC262 patch to support a FSC laptop. The internal speaker is turned on/off with jack sensing. Also fixed alc262 'basic' model. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-01 14:16:17 +01:00
ALSA: hda/realtek - Generic mute LED implementation for HP laptops As David Henningsson recently suggested, some HP laptops use an unused mic pin for controlling a mute LED, and this information is provided via DMI string "HP_Mute_LED_X_Y" string. This patch adds the generic support for such cases, as we've already done in patch_sigmatel.c. This is applied generically to all devices with ID 0x103c. But as we don't know whether the device 103c:1586 really contains HP_Mute_LED_X_Y DMI string, still keep the static setup for this device using the mic2 pin 0x19. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:33:58 +01:00
/* mute LED for HP laptops, see alc269_fixup_mic_mute_hook() */
int mute_led_polarity;
hda_nid_t mute_led_nid;
[ALSA] hda-codec - Add lg model for LG laptop Modules: Documentation,HDA Codec driver Added a new model 'lg' for LG laptop (m1 express dual) with ALC880 codec. Also clean up the initialization/unsol_event hooks in patch_realtek.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-03 16:47:17 +01:00
/* hooks */
void (*init_hook)(struct hda_codec *codec);
ALSA: hda - Clean up CONFIG_SND_HDA_POWER_SAVE CONFIG_SND_HDA_POWER_SAVE is no longer an experimental feature and its behavior can be well controlled via the default value and module parameter. Let's just replace it with the standard CONFIG_PM. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-24 18:38:08 +02:00
#ifdef CONFIG_PM
ALSA: hda: Refactor powerdown for Realtek HDA codecs This patch converts the alc889 Aspire-specific powerdown to a generic one. Like the previous effort, it currently only handles Front and PCM but can be easily extended to cover other nids. The existing hook for alc889 Aspire-specific remains enabled. Upon further testing, I've added its use for ALC861_AUTO as well. Following patches will enable them for other quirks. Tested-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-27 18:52:08 -05:00
void (*power_hook)(struct hda_codec *codec);
ALSA: HDA: add powersaving hook for Realtek The current Realtek code makes no specific provision for turning stuff off. The codec chip is placed into low-power mode generically, but this doesn't turn off any external hardware connected to it, in particular external amplifiers. This patch creates a hook function that is called by the codec suspend/resume functions. It ought to disable any external hardware in a device-specific way. I've implemented a generic ALC889 function that sets the EAPD pin properly, and used it for the Acer Aspire 8930G which can benefit from this feature. On my laptop, this results in ~0.5W extra savings. Signed-off-by: Hector Martin <hector@marcansoft.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-20 22:51:31 +01:00
#endif
ALSA: hda - Introduce shutup callback to Realtek spec struct Add shutup callback to be called codec-specifically for avoiding pop noises at suspend or shutdown. As a generic callback, just turn EAPD off. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-07 10:37:16 +02:00
void (*shutup)(struct hda_codec *codec);
ALSA: hda - Consolidate default automute functions for Realtek There are two entry points for the headphone automute functions for Realtek, alc_automute_amp() and alc_automute_pin(). These call the same function in the end, so we can basically consolidate these with a flag in spec. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-28 12:18:53 +02:00
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
int init_amp;
ALSA: hda - Optimize the check of ALC269 codec variants Don't call the COEF check for checking ACL269 codec variants at each time in init but remember the type at the initialization. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-20 15:11:54 +02:00
int codec_variant; /* flag for other variants */
ALSA: hda - Allow digital-only I/O on ALC262 codec Some laptops like VAIO have multiple codecs and uses ALC262 only for the SPIDF output without analog I/O. So far, the codec-parser assumes the presence of analog I/O and returned an error for such a case. This patch adds some hacks to allow the digital-only configuration for ALC262. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-20 18:32:55 +01:00
[ALSA] hda - Fix PLL gating control on Realtek codecs On some Realtek codecs, the analog PLL gating control bit must be set off while the default value is 1. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-04 12:39:38 +02:00
/* for PLL fix */
hda_nid_t pll_nid;
unsigned int pll_coef_idx, pll_coef_bit;
ALSA: hda/realtek - Cache COEF 0 value The COEF #0 value represents a sort of device id, so it's supposedly constant while operation. Better to use the cached value instead of reading it at each time from the performance POV. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:50:59 +02:00
unsigned int coef0;
[ALSA] hda-codec - Add the support of ALC262,ALC883,ALC885,ALC861 Modules: HDA Codec driver,HDA generic driver This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver More models and improvements for ALC880, ALC260 and ALC882 codecs, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-12-05 19:42:22 +01:00
};
ALSA: hda - Use macros to check array overflow Use macro to add mixer and verb elements to check the possible array overflow. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-31 15:01:37 +01:00
/*
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
* Append the given mixer and verb elements for the later use
* The mixer array is referred in build_controls(), and init_verbs are
* called in init().
ALSA: hda - Use macros to check array overflow Use macro to add mixer and verb elements to check the possible array overflow. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-31 15:01:37 +01:00
*/
ALSA: hda - Constify fixup and other array data in patch_realtek.c Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02 11:30:18 +02:00
static void add_mixer(struct alc_spec *spec, const struct snd_kcontrol_new *mix)
ALSA: hda - Use macros to check array overflow Use macro to add mixer and verb elements to check the possible array overflow. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-31 15:01:37 +01:00
{
if (snd_BUG_ON(spec->num_mixers >= ARRAY_SIZE(spec->mixers)))
return;
spec->mixers[spec->num_mixers++] = mix;
}
[ALSA] hda-codec - Add the support of ALC262,ALC883,ALC885,ALC861 Modules: HDA Codec driver,HDA generic driver This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver More models and improvements for ALC880, ALC260 and ALC882 codecs, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-12-05 19:42:22 +01:00
/*
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
* GPIO setup tables, used in initialization
[ALSA] hda-codec - Add the support of ALC262,ALC883,ALC885,ALC861 Modules: HDA Codec driver,HDA generic driver This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver More models and improvements for ALC880, ALC260 and ALC882 codecs, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-12-05 19:42:22 +01:00
*/
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
/* Enable GPIO mask and set output */
ALSA: hda - Constify fixup and other array data in patch_realtek.c Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02 11:30:18 +02:00
static const struct hda_verb alc_gpio1_init_verbs[] = {
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
{0x01, AC_VERB_SET_GPIO_MASK, 0x01},
{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
{0x01, AC_VERB_SET_GPIO_DATA, 0x01},
{ }
};
ALSA: hda - Constify fixup and other array data in patch_realtek.c Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02 11:30:18 +02:00
static const struct hda_verb alc_gpio2_init_verbs[] = {
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
{0x01, AC_VERB_SET_GPIO_MASK, 0x02},
{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x02},
{0x01, AC_VERB_SET_GPIO_DATA, 0x02},
{ }
};
ALSA: hda - Constify fixup and other array data in patch_realtek.c Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02 11:30:18 +02:00
static const struct hda_verb alc_gpio3_init_verbs[] = {
[ALSA] hda-codec - Add ALC861VD Lenovo support - Added ALC861VD Lenovo support (17aa:3802, 17aa:2066) - Modify alc_subsystem_id Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-08 15:19:08 +02:00
{0x01, AC_VERB_SET_GPIO_MASK, 0x03},
{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x03},
{0x01, AC_VERB_SET_GPIO_DATA, 0x03},
{ }
};
[ALSA] hda - Fix PLL gating control on Realtek codecs On some Realtek codecs, the analog PLL gating control bit must be set off while the default value is 1. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-04 12:39:38 +02:00
/*
* Fix hardware PLL issue
* On some codecs, the analog PLL gating control must be off while
* the default value is 1.
*/
static void alc_fix_pll(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
unsigned int val;
if (!spec->pll_nid)
return;
snd_hda_codec_write(codec, spec->pll_nid, 0, AC_VERB_SET_COEF_INDEX,
spec->pll_coef_idx);
val = snd_hda_codec_read(codec, spec->pll_nid, 0,
AC_VERB_GET_PROC_COEF, 0);
snd_hda_codec_write(codec, spec->pll_nid, 0, AC_VERB_SET_COEF_INDEX,
spec->pll_coef_idx);
snd_hda_codec_write(codec, spec->pll_nid, 0, AC_VERB_SET_PROC_COEF,
val & ~(1 << spec->pll_coef_bit));
}
static void alc_fix_pll_init(struct hda_codec *codec, hda_nid_t nid,
unsigned int coef_idx, unsigned int coef_bit)
{
struct alc_spec *spec = codec->spec;
spec->pll_nid = nid;
spec->pll_coef_idx = coef_idx;
spec->pll_coef_bit = coef_bit;
alc_fix_pll(codec);
}
ALSA: hda/realtek - Rewrite ALC880 model=futjisu with auto-parser Now adding the support for the volume-knob widget, we can move the static quirk for ALC880 model=fujitsu to the auto-parser completely. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 16:31:07 +01:00
/* update the master volume per volume-knob's unsol event */
ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event For less duplication of code between codecs, and to make it easier in the future to improve code for all codecs simultaneously. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-25 11:31:00 +02:00
static void alc_update_knob_master(struct hda_codec *codec, struct hda_jack_tbl *jack)
ALSA: hda/realtek - Rewrite ALC880 model=futjisu with auto-parser Now adding the support for the volume-knob widget, we can move the static quirk for ALC880 model=fujitsu to the auto-parser completely. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 16:31:07 +01:00
{
unsigned int val;
struct snd_kcontrol *kctl;
struct snd_ctl_elem_value *uctl;
kctl = snd_hda_find_mixer_ctl(codec, "Master Playback Volume");
if (!kctl)
return;
uctl = kzalloc(sizeof(*uctl), GFP_KERNEL);
if (!uctl)
return;
ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event For less duplication of code between codecs, and to make it easier in the future to improve code for all codecs simultaneously. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-25 11:31:00 +02:00
val = snd_hda_codec_read(codec, jack->nid, 0,
ALSA: hda/realtek - Rewrite ALC880 model=futjisu with auto-parser Now adding the support for the volume-knob widget, we can move the static quirk for ALC880 model=fujitsu to the auto-parser completely. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 16:31:07 +01:00
AC_VERB_GET_VOLUME_KNOB_CONTROL, 0);
val &= HDA_AMP_VOLMASK;
uctl->value.integer.value[0] = val;
uctl->value.integer.value[1] = val;
kctl->put(kctl, uctl);
kfree(uctl);
}
ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event For less duplication of code between codecs, and to make it easier in the future to improve code for all codecs simultaneously. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-25 11:31:00 +02:00
static void alc880_unsol_event(struct hda_codec *codec, unsigned int res)
ALSA: hda/realtek - Avoid conflict of unsol-events with static quirks The recently added jack-kctl support sets the unsol event tags dynamically, while static quirks usually set the fixed tags in the init_verbs array. Due to this conflict, the own unsol event handler can't retrieve the tag and handle it properly any more. For fixing this, avoid calling snd_hda_jack_add_kctls() for static quirks, and always let them use own handlers instead of the standard one for the auto-pareser. Reported-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-19 12:10:29 +01:00
{
ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event For less duplication of code between codecs, and to make it easier in the future to improve code for all codecs simultaneously. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-25 11:31:00 +02:00
/* For some reason, the res given from ALC880 is broken.
Here we adjust it properly. */
snd_hda_jack_unsol_event(codec, res >> 2);
ALSA: hda/realtek - Avoid conflict of unsol-events with static quirks The recently added jack-kctl support sets the unsol event tags dynamically, while static quirks usually set the fixed tags in the init_verbs array. Due to this conflict, the own unsol event handler can't retrieve the tag and handle it properly any more. For fixing this, avoid calling snd_hda_jack_add_kctls() for static quirks, and always let them use own handlers instead of the standard one for the auto-pareser. Reported-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-19 12:10:29 +01:00
}
[ALSA] hda - Fix EAPD and COEF setups for realtek codecs Fixed EAPD and COEF setups for Realtek ALC662/663, 660-VD and 888 codecs. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27 12:32:25 +02:00
/* additional initialization for ALC888 variants */
static void alc888_coef_init(struct hda_codec *codec)
{
unsigned int tmp;
snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_COEF_INDEX, 0);
tmp = snd_hda_codec_read(codec, 0x20, 0, AC_VERB_GET_PROC_COEF, 0);
snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_COEF_INDEX, 7);
ALSA: hda - Fix check of ALC888S-VC in alc888_coef_init() Fixed the wrong bits check to identify ALC888S-VC model in alc888_coef_init(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-05 09:40:16 +01:00
if ((tmp & 0xf0) == 0x20)
[ALSA] hda - Fix EAPD and COEF setups for realtek codecs Fixed EAPD and COEF setups for Realtek ALC662/663, 660-VD and 888 codecs. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27 12:32:25 +02:00
/* alc888S-VC */
snd_hda_codec_read(codec, 0x20, 0,
AC_VERB_SET_PROC_COEF, 0x830);
else
/* alc888-VB */
snd_hda_codec_read(codec, 0x20, 0,
AC_VERB_SET_PROC_COEF, 0x3030);
}
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/* additional initialization for ALC889 variants */
ALSA: hda - Add better Intel IbexPeak platform support Here are the new sound enabling patches for IbexPeak. Summary of tested features: - playback - Front Headphone: OK - 8 channel audio: Front/Rear/CLFE/Side all OK - recording - Front Mic/Rear Mic: both OK (front/rear/line mics are selectable in the "Input source" alsamixer control) - Line In: not working (in 6ch mode, its amp/mute, direction and route all looks fine, so I'm a little puzzled) (hopefully no one will care this feature) - digital SPDIF input/output: not tested (no equipment) Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-23 10:58:29 +02:00
static void alc889_coef_init(struct hda_codec *codec)
{
unsigned int tmp;
snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_COEF_INDEX, 7);
tmp = snd_hda_codec_read(codec, 0x20, 0, AC_VERB_GET_PROC_COEF, 0);
snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_COEF_INDEX, 7);
snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_PROC_COEF, tmp|0x2010);
}
ALSA: hda - Turn on EAPD only if available for Realtek codecs Some codecs disable widgets used for output pins and reserve as vendor- spec widgets. Thus we need to check the widget type and pin cap before actually sending SET_EAPD verbs in the auto-configuration mode. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-19 15:46:37 +01:00
/* turn on/off EAPD control (only if available) */
static void set_eapd(struct hda_codec *codec, hda_nid_t nid, int on)
{
if (get_wcaps_type(get_wcaps(codec, nid)) != AC_WID_PIN)
return;
if (snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_EAPD)
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_EAPD_BTLENABLE,
on ? 2 : 0);
}
ALSA: hda - Refactoring EAPD controls Reduced the duplicated codes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-07 10:31:43 +02:00
/* turn on/off EAPD controls of the codec */
static void alc_auto_setup_eapd(struct hda_codec *codec, bool on)
{
/* We currently only handle front, HP */
ALSA: hda - Simplify EAPD control in patch_realtek.c Look through the known NIDs that may have EAPD capabilities and turn on/off them appropriately instead of checking the individual vendor ids. This will also avoid the forgotten entries of newly added codec ids in future. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27 15:28:57 +02:00
static hda_nid_t pins[] = {
0x0f, 0x10, 0x14, 0x15, 0
};
hda_nid_t *p;
for (p = pins; *p; p++)
set_eapd(codec, *p, on);
ALSA: hda - Refactoring EAPD controls Reduced the duplicated codes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-07 10:31:43 +02:00
}
ALSA: hda - Introduce shutup callback to Realtek spec struct Add shutup callback to be called codec-specifically for avoiding pop noises at suspend or shutdown. As a generic callback, just turn EAPD off. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-07 10:37:16 +02:00
/* generic shutup callback;
* just turning off EPAD and a little pause for avoiding pop-noise
*/
static void alc_eapd_shutup(struct hda_codec *codec)
{
alc_auto_setup_eapd(codec, false);
msleep(200);
}
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/* generic EAPD initialization */
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
static void alc_auto_init_amp(struct hda_codec *codec, int type)
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
{
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
unsigned int tmp;
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
ALSA: hda - Simplify EAPD control in patch_realtek.c Look through the known NIDs that may have EAPD capabilities and turn on/off them appropriately instead of checking the individual vendor ids. This will also avoid the forgotten entries of newly added codec ids in future. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27 15:28:57 +02:00
alc_auto_setup_eapd(codec, true);
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
switch (type) {
case ALC_INIT_GPIO1:
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
snd_hda_sequence_write(codec, alc_gpio1_init_verbs);
break;
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
case ALC_INIT_GPIO2:
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
snd_hda_sequence_write(codec, alc_gpio2_init_verbs);
break;
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
case ALC_INIT_GPIO3:
[ALSA] hda-codec - Add ALC861VD Lenovo support - Added ALC861VD Lenovo support (17aa:3802, 17aa:2066) - Modify alc_subsystem_id Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-08 15:19:08 +02:00
snd_hda_sequence_write(codec, alc_gpio3_init_verbs);
break;
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
case ALC_INIT_DEFAULT:
[ALSA] hda-codec - Fix SKU ID function for realtek codecs Fixed SKU ID function for realtek codecs. It's used by the automatic BIOS configuration mode. Now it supports the correct jack-detection mechanism, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 14:30:01 +02:00
switch (codec->vendor_id) {
case 0x10ec0260:
snd_hda_codec_write(codec, 0x1a, 0,
AC_VERB_SET_COEF_INDEX, 7);
tmp = snd_hda_codec_read(codec, 0x1a, 0,
AC_VERB_GET_PROC_COEF, 0);
snd_hda_codec_write(codec, 0x1a, 0,
AC_VERB_SET_COEF_INDEX, 7);
snd_hda_codec_write(codec, 0x1a, 0,
AC_VERB_SET_PROC_COEF,
tmp | 0x2010);
break;
case 0x10ec0262:
case 0x10ec0880:
case 0x10ec0882:
case 0x10ec0883:
case 0x10ec0885:
ALSA: hda - Add missing COEF initialization for ALC887 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-06 12:46:59 +01:00
case 0x10ec0887:
ALSA: hda - Fix SPDIF out regression on ALC889 The commit 5a8cfb4e8ae317d283f84122ed20faa069c5e0c4 ALSA: hda - Use ALC_INIT_DEFAULT for really default initialization changed to use the default initialization method for ALC889, but this caused a regression on SPDIF output on some machines. This seems due to the COEF setup included in the default init procedure. For making SPDIF working again, the COEF-setup has to be avoided for the id 0889. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=24342 Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-23 22:54:32 +01:00
/*case 0x10ec0889:*/ /* this causes an SPDIF problem */
ALSA: hda - Add better Intel IbexPeak platform support Here are the new sound enabling patches for IbexPeak. Summary of tested features: - playback - Front Headphone: OK - 8 channel audio: Front/Rear/CLFE/Side all OK - recording - Front Mic/Rear Mic: both OK (front/rear/line mics are selectable in the "Input source" alsamixer control) - Line In: not working (in 6ch mode, its amp/mute, direction and route all looks fine, so I'm a little puzzled) (hopefully no one will care this feature) - digital SPDIF input/output: not tested (no equipment) Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-23 10:58:29 +02:00
alc889_coef_init(codec);
[ALSA] hda-codec - Fix SKU ID function for realtek codecs Fixed SKU ID function for realtek codecs. It's used by the automatic BIOS configuration mode. Now it supports the correct jack-detection mechanism, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 14:30:01 +02:00
break;
[ALSA] hda - Fix EAPD and COEF setups for realtek codecs Fixed EAPD and COEF setups for Realtek ALC662/663, 660-VD and 888 codecs. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27 12:32:25 +02:00
case 0x10ec0888:
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
alc888_coef_init(codec);
[ALSA] hda - Fix EAPD and COEF setups for realtek codecs Fixed EAPD and COEF setups for Realtek ALC662/663, 660-VD and 888 codecs. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27 12:32:25 +02:00
break;
ALSA: hda - Remove the COEF setup for ALC267/ALC268 The COEF setup for model=auto seems problematic on some laptops, resulting in the silent speaker output. Better to disable it for now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-25 15:44:11 +01:00
#if 0 /* XXX: This may cause the silent output on speaker on some machines */
[ALSA] hda-codec - Fix SKU ID function for realtek codecs Fixed SKU ID function for realtek codecs. It's used by the automatic BIOS configuration mode. Now it supports the correct jack-detection mechanism, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 14:30:01 +02:00
case 0x10ec0267:
case 0x10ec0268:
snd_hda_codec_write(codec, 0x20, 0,
AC_VERB_SET_COEF_INDEX, 7);
tmp = snd_hda_codec_read(codec, 0x20, 0,
AC_VERB_GET_PROC_COEF, 0);
snd_hda_codec_write(codec, 0x20, 0,
ALSA: hda - fix spaces in patch_realtek.c Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-26 12:58:38 +02:00
AC_VERB_SET_COEF_INDEX, 7);
[ALSA] hda-codec - Fix SKU ID function for realtek codecs Fixed SKU ID function for realtek codecs. It's used by the automatic BIOS configuration mode. Now it supports the correct jack-detection mechanism, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 14:30:01 +02:00
snd_hda_codec_write(codec, 0x20, 0,
AC_VERB_SET_PROC_COEF,
tmp | 0x3000);
break;
ALSA: hda - Remove the COEF setup for ALC267/ALC268 The COEF setup for model=auto seems problematic on some laptops, resulting in the silent speaker output. Better to disable it for now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-25 15:44:11 +01:00
#endif /* XXX */
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
}
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
break;
}
}
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/*
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
* Realtek SSID verification
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
*/
ALSA: HDA: Refactor Realtek's automute Increase readability and understandability in the automute code. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-20 12:04:56 +02:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
/* Could be any non-zero and even value. When used as fixup, tells
* the driver to ignore any present sku defines.
*/
#define ALC_FIXUP_SKU_IGNORE (2)
ALSA: hda - Add support for Line-Out automute to Realtek auto-parser By popular demands, I add the functionality to mute / unmute the line-out jacks per the headphone plug / unplug. For achieving this and keeping the compatibility with the old behavior, the new mixer enum "Auto-Mute Mode" is added. With this, user can control the auto-mute behavior either disabled, speaker-only or lineout+speaker. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-28 17:36:18 +02:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
static void alc_fixup_sku_ignore(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
ALSA: hda - Add support for Line-Out automute to Realtek auto-parser By popular demands, I add the functionality to mute / unmute the line-out jacks per the headphone plug / unplug. For achieving this and keeping the compatibility with the old behavior, the new mixer enum "Auto-Mute Mode" is added. With this, user can control the auto-mute behavior either disabled, speaker-only or lineout+speaker. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-28 17:36:18 +02:00
{
struct alc_spec *spec = codec->spec;
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
if (action == HDA_FIXUP_ACT_PRE_PROBE) {
spec->cdefine.fixup = 1;
spec->cdefine.sku_cfg = ALC_FIXUP_SKU_IGNORE;
ALSA: hda - Add support for Line-Out automute to Realtek auto-parser By popular demands, I add the functionality to mute / unmute the line-out jacks per the headphone plug / unplug. For achieving this and keeping the compatibility with the old behavior, the new mixer enum "Auto-Mute Mode" is added. With this, user can control the auto-mute behavior either disabled, speaker-only or lineout+speaker. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-28 17:36:18 +02:00
}
}
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
static int alc_auto_parse_customize_define(struct hda_codec *codec)
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
{
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
unsigned int ass, tmp, i;
unsigned nid = 0;
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
struct alc_spec *spec = codec->spec;
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
spec->cdefine.enable_pcbeep = 1; /* assume always enabled */
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
if (spec->cdefine.fixup) {
ass = spec->cdefine.sku_cfg;
if (ass == ALC_FIXUP_SKU_IGNORE)
return -1;
goto do_sku;
ALSA: hda - Support multiple headphone auto-mute Currently headphone auto-mute using alc_automute_pin() assumes only the single pin used for the headphone output. Since there are devices with multiple headphone jacks, we need to check all these pins there, too. Also this patch merges the common code between alc_automute_pin() and alc_automute_amp() helper functions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-08 15:30:49 +02:00
}
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
ass = codec->subsystem_id & 0xffff;
if (ass != codec->bus->pci->subsystem_device && (ass & 1))
goto do_sku;
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
nid = 0x1d;
if (codec->vendor_id == 0x10ec0260)
nid = 0x17;
ass = snd_hda_codec_get_pincfg(codec, nid);
ALSA: HDA: Refactor Realtek's automute Increase readability and understandability in the automute code. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-20 12:04:56 +02:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
if (!(ass & 1)) {
printk(KERN_INFO "hda_codec: %s: SKU not ready 0x%08x\n",
codec->chip_name, ass);
return -1;
ALSA: HDA: Refactor Realtek's automute Increase readability and understandability in the automute code. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-20 12:04:56 +02:00
}
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
/* check sum */
tmp = 0;
for (i = 1; i < 16; i++) {
if ((ass >> i) & 1)
tmp++;
ALSA: hda - Add Auto-Mute Mode enum for two-output cases The Auto-Mute Mode control is useful even when only two outputs (e.g. HP and speaker) are available. Then user can enable/disable the auto-mute behavior on the fly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-28 18:09:52 +02:00
}
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
if (((ass >> 16) & 0xf) != tmp)
return -1;
ALSA: hda - Add Auto-Mute Mode enum for two-output cases The Auto-Mute Mode control is useful even when only two outputs (e.g. HP and speaker) are available. Then user can enable/disable the auto-mute behavior on the fly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-28 18:09:52 +02:00
ALSA: hda - Add parse customize define function for Realtek codecs Added alc_auto_parse_customize_define() to parse the Realtek-specific attributes from SKU. Also enable beep controls only when the proper attribute bit is set. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-19 11:23:45 +01:00
spec->cdefine.port_connectivity = ass >> 30;
spec->cdefine.enable_pcbeep = (ass & 0x100000) >> 20;
spec->cdefine.check_sum = (ass >> 16) & 0xf;
spec->cdefine.customization = ass >> 8;
do_sku:
spec->cdefine.sku_cfg = ass;
spec->cdefine.external_amp = (ass & 0x38) >> 3;
spec->cdefine.platform_type = (ass & 0x4) >> 2;
spec->cdefine.swap = (ass & 0x2) >> 1;
spec->cdefine.override = ass & 0x1;
snd_printd("SKU: Nid=0x%x sku_cfg=0x%08x\n",
nid, spec->cdefine.sku_cfg);
snd_printd("SKU: port_connectivity=0x%x\n",
spec->cdefine.port_connectivity);
snd_printd("SKU: enable_pcbeep=0x%x\n", spec->cdefine.enable_pcbeep);
snd_printd("SKU: check_sum=0x%08x\n", spec->cdefine.check_sum);
snd_printd("SKU: customization=0x%08x\n", spec->cdefine.customization);
snd_printd("SKU: external_amp=0x%x\n", spec->cdefine.external_amp);
snd_printd("SKU: platform_type=0x%x\n", spec->cdefine.platform_type);
snd_printd("SKU: swap=0x%x\n", spec->cdefine.swap);
snd_printd("SKU: override=0x%x\n", spec->cdefine.override);
return 0;
}
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
/* return the position of NID in the list, or -1 if not found */
static int find_idx_in_nid_list(hda_nid_t nid, const hda_nid_t *list, int nums)
{
int i;
for (i = 0; i < nums; i++)
if (list[i] == nid)
return i;
return -1;
}
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/* return true if the given NID is found in the list */
ALSA: hda - Check hard-wired DACs at first for ALC662 & co Some Realtek codecs have the output pins hardwired with certain DACs. These DACs have to be assigned at first and assign the rest for multi-DAC pins so that all DACs can be assigned properly. Without such an optimization, speaker outputs may be assigned to the same DAC as the headphone or others. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27 12:34:01 +02:00
static bool found_in_nid_list(hda_nid_t nid, const hda_nid_t *list, int nums)
{
ALSA: hda - More flexible dynamic-ADC switching for Realtek codecs This patch changes the auto-parser and the auto-mic handling codes to allow more flexible dynamic ADC-switching with Realtek codecs. In the new code, the following strategy is taken: - When a cap-src can't handle all input-sources, either skip it, or switch to the ADC-switching mode. In ADC-switching mode, like the former dual-ADC mode for ALC275, it changes ADC on the fly according to the current input source. - When auto-mic is possible, always assign imux. If the mic pins are set statically via a quirk, rebuild imux according to the pins. In the auto-mic mode, the driver always changes the imux (although the imux isn't exposed as a mixer element). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 15:01:13 +02:00
return find_idx_in_nid_list(nid, list, nums) >= 0;
ALSA: hda - Check hard-wired DACs at first for ALC662 & co Some Realtek codecs have the output pins hardwired with certain DACs. These DACs have to be assigned at first and assign the rest for multi-DAC pins so that all DACs can be assigned properly. Without such an optimization, speaker outputs may be assigned to the same DAC as the headphone or others. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27 12:34:01 +02:00
}
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
/* check subsystem ID and set up device-specific initialization;
* return 1 if initialized, 0 if invalid SSID
*/
/* 32-bit subsystem ID for BIOS loading in HD Audio codec.
* 31 ~ 16 : Manufacture ID
* 15 ~ 8 : SKU ID
* 7 ~ 0 : Assembly ID
* port-A --> pin 39/41, port-E --> pin 14/15, port-D --> pin 35/36
*/
static int alc_subsystem_id(struct hda_codec *codec,
hda_nid_t porta, hda_nid_t porte,
ALSA: hda - Add ALC670 codec support - Fixed alc_subsystem_id( ) typo and add new function. - !(ass & 0x100000)) ==> Delete this check. It is unnecessary check. - Add porti - ALC670 support Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-25 08:36:52 +01:00
hda_nid_t portd, hda_nid_t porti)
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
{
unsigned int ass, tmp, i;
unsigned nid;
struct alc_spec *spec = codec->spec;
ALSA: HDA: Enable SKU quirks for Realtek Realtek have ways of specifying external amps and more via a special nid or via the Codec's subsystem ID, this is called "SKU". The computer manufacturer sometimes gets this wrong, so we need to be able to override or ignore the SKU customization value. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-14 14:50:18 +02:00
if (spec->cdefine.fixup) {
ass = spec->cdefine.sku_cfg;
if (ass == ALC_FIXUP_SKU_IGNORE)
return 0;
goto do_sku;
}
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
ass = codec->subsystem_id & 0xffff;
if ((ass != codec->bus->pci->subsystem_device) && (ass & 1))
goto do_sku;
/* invalid SSID, check the special NID pin defcfg instead */
/*
ALSA: HDA - Correct trivial typos in comments. Correct some trivial typos in comments. Signed-off-by: Sasha Alexandr <brina_keith@ns.sympatico.ca> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-16 16:00:15 -04:00
* 31~30 : port connectivity
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
* 29~21 : reserve
* 20 : PCBEEP input
* 19~16 : Check sum (15:1)
* 15~1 : Custom
* 0 : override
*/
nid = 0x1d;
if (codec->vendor_id == 0x10ec0260)
nid = 0x17;
ass = snd_hda_codec_get_pincfg(codec, nid);
snd_printd("realtek: No valid SSID, "
"checking pincfg 0x%08x for NID 0x%x\n",
ALSA: hda - Fix a typo in patch_realtek.c again The commmit dfed0ef9b3ff9e37903920b6938ed33344ad0b3d was reverted accidentally by the merge of auto-detection fix patch. Fixed again now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-28 13:03:19 +02:00
ass, nid);
ALSA: hda - Add ALC670 codec support - Fixed alc_subsystem_id( ) typo and add new function. - !(ass & 0x100000)) ==> Delete this check. It is unnecessary check. - Add porti - ALC670 support Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-25 08:36:52 +01:00
if (!(ass & 1))
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
return 0;
if ((ass >> 30) != 1) /* no physical connection */
return 0;
/* check sum */
tmp = 0;
for (i = 1; i < 16; i++) {
if ((ass >> i) & 1)
tmp++;
}
if (((ass >> 16) & 0xf) != tmp)
return 0;
do_sku:
snd_printd("realtek: Enabling init ASM_ID=0x%04x CODEC_ID=%08x\n",
ass & 0xffff, codec->vendor_id);
/*
* 0 : override
* 1 : Swap Jack
* 2 : 0 --> Desktop, 1 --> Laptop
* 3~5 : External Amplifier control
* 7~6 : Reserved
*/
tmp = (ass & 0x38) >> 3; /* external Amp control */
switch (tmp) {
case 1:
spec->init_amp = ALC_INIT_GPIO1;
break;
case 3:
spec->init_amp = ALC_INIT_GPIO2;
break;
case 7:
spec->init_amp = ALC_INIT_GPIO3;
break;
case 5:
ALSA: hda - Use ALC_INIT_DEFAULT for really default initialization When SKU assid gives no valid bits for 0x38, the driver didn't take any action, so far. This resulted in the missing initialization for external amps, etc, thus the silent output in the end. Especially users hit this problem on ALC888 newly since 2.6.35, where the driver doesn't force to use ALC_INIT_DEFAULT any more. This patch sets the default initialization scheme to use ALC_INIT_DEFAULT when no valid bits are set for SKU assid. Reference: https://bugzilla.redhat.com/show_bug.cgi?id=657388 Reported-and-tested-by: Kyle McMartin <kyle@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-26 17:11:18 +01:00
default:
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
spec->init_amp = ALC_INIT_DEFAULT;
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
break;
}
ALSA: hda - fix spaces in patch_realtek.c Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-26 12:58:38 +02:00
[ALSA] hda-codec - Update realtek codec support 1. Support HP rp5700 2. Fixed alc_subsystem_id function (Bug fixed and support Desktop) 3. Support ASUS EP20 Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-10 13:03:59 +01:00
/* is laptop or Desktop and enable the function "Mute internal speaker
[ALSA] hda-codec - Fix SKU ID function for realtek codecs Fixed SKU ID function for realtek codecs. It's used by the automatic BIOS configuration mode. Now it supports the correct jack-detection mechanism, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 14:30:01 +02:00
* when the external headphone out jack is plugged"
*/
[ALSA] hda-codec - Update realtek codec support 1. Support HP rp5700 2. Fixed alc_subsystem_id function (Bug fixed and support Desktop) 3. Support ASUS EP20 Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-10 13:03:59 +01:00
if (!(ass & 0x8000))
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
return 1;
[ALSA] hda-codec - Fix SKU ID function for realtek codecs Fixed SKU ID function for realtek codecs. It's used by the automatic BIOS configuration mode. Now it supports the correct jack-detection mechanism, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 14:30:01 +02:00
/*
* 10~8 : Jack location
* 12~11: Headphone out -> 00: PortA, 01: PortE, 02: PortD, 03: Resvered
* 14~13: Resvered
* 15 : 1 --> enable the function "Mute internal speaker
* when the external headphone out jack is plugged"
*/
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
if (!spec->gen.autocfg.hp_pins[0] &&
!(spec->gen.autocfg.line_out_pins[0] &&
spec->gen.autocfg.line_out_type == AUTO_PIN_HP_OUT)) {
ALSA: hda - Don't pick up invalid HP pins in alc_subsystem_id() alc_subsystem_id() tries to pick up a headphone pin if not configured, but this caused side-effects as the problem in commit 15870f05e90a365f8022da416e713be0c5024e2f. This patch fixes the driver behavior to pick up invalid HP pins; at least, the pins that are listed as the primary outputs aren't taken any more. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-06 13:21:54 +02:00
hda_nid_t nid;
[ALSA] hda-codec - Fix SKU ID function for realtek codecs Fixed SKU ID function for realtek codecs. It's used by the automatic BIOS configuration mode. Now it supports the correct jack-detection mechanism, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 14:30:01 +02:00
tmp = (ass >> 11) & 0x3; /* HP to chassis */
if (tmp == 0)
ALSA: hda - Don't pick up invalid HP pins in alc_subsystem_id() alc_subsystem_id() tries to pick up a headphone pin if not configured, but this caused side-effects as the problem in commit 15870f05e90a365f8022da416e713be0c5024e2f. This patch fixes the driver behavior to pick up invalid HP pins; at least, the pins that are listed as the primary outputs aren't taken any more. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-06 13:21:54 +02:00
nid = porta;
[ALSA] hda-codec - Fix SKU ID function for realtek codecs Fixed SKU ID function for realtek codecs. It's used by the automatic BIOS configuration mode. Now it supports the correct jack-detection mechanism, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 14:30:01 +02:00
else if (tmp == 1)
ALSA: hda - Don't pick up invalid HP pins in alc_subsystem_id() alc_subsystem_id() tries to pick up a headphone pin if not configured, but this caused side-effects as the problem in commit 15870f05e90a365f8022da416e713be0c5024e2f. This patch fixes the driver behavior to pick up invalid HP pins; at least, the pins that are listed as the primary outputs aren't taken any more. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-06 13:21:54 +02:00
nid = porte;
[ALSA] hda-codec - Fix SKU ID function for realtek codecs Fixed SKU ID function for realtek codecs. It's used by the automatic BIOS configuration mode. Now it supports the correct jack-detection mechanism, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 14:30:01 +02:00
else if (tmp == 2)
ALSA: hda - Don't pick up invalid HP pins in alc_subsystem_id() alc_subsystem_id() tries to pick up a headphone pin if not configured, but this caused side-effects as the problem in commit 15870f05e90a365f8022da416e713be0c5024e2f. This patch fixes the driver behavior to pick up invalid HP pins; at least, the pins that are listed as the primary outputs aren't taken any more. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-06 13:21:54 +02:00
nid = portd;
ALSA: hda - Add ALC670 codec support - Fixed alc_subsystem_id( ) typo and add new function. - !(ass & 0x100000)) ==> Delete this check. It is unnecessary check. - Add porti - ALC670 support Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-25 08:36:52 +01:00
else if (tmp == 3)
nid = porti;
[ALSA] hda-codec - Fix SKU ID function for realtek codecs Fixed SKU ID function for realtek codecs. It's used by the automatic BIOS configuration mode. Now it supports the correct jack-detection mechanism, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 14:30:01 +02:00
else
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
return 1;
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
if (found_in_nid_list(nid, spec->gen.autocfg.line_out_pins,
spec->gen.autocfg.line_outs))
ALSA: hda - Check hard-wired DACs at first for ALC662 & co Some Realtek codecs have the output pins hardwired with certain DACs. These DACs have to be assigned at first and assign the rest for multi-DAC pins so that all DACs can be assigned properly. Without such an optimization, speaker outputs may be assigned to the same DAC as the headphone or others. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27 12:34:01 +02:00
return 1;
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
spec->gen.autocfg.hp_pins[0] = nid;
[ALSA] hda-codec - Fix SKU ID function for realtek codecs Fixed SKU ID function for realtek codecs. It's used by the automatic BIOS configuration mode. Now it supports the correct jack-detection mechanism, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 14:30:01 +02:00
}
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
return 1;
}
ALSA: hda - fix spaces in patch_realtek.c Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-26 12:58:38 +02:00
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
/* Check the validity of ALC subsystem-id
* ports contains an array of 4 pin NIDs for port-A, E, D and I */
static void alc_ssid_check(struct hda_codec *codec, const hda_nid_t *ports)
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
{
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
if (!alc_subsystem_id(codec, ports[0], ports[1], ports[2], ports[3])) {
ALSA: hda - Add amp initialization for realtek auto mode In the realtek auto-probing mode, the initialization of amp with some magic COEF or EAPD verbs is applied only when the codec SSID has valid values to satisfy the realtek's definition. However, many devices don't provide in that way, thus the device doesn't work as is. This patch allows the same initialization code even if the SSID doesn't pass the bit test. Also, alc_subsystem_id() is changed just to check and define the type, so that it's called in the parser, instead of the initializer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22 16:31:35 +02:00
struct alc_spec *spec = codec->spec;
snd_printd("realtek: "
"Enable default setup for auto mode as fallback\n");
spec->init_amp = ALC_INIT_DEFAULT;
}
ALSA: hda - More flexible dynamic-ADC switching for Realtek codecs This patch changes the auto-parser and the auto-mic handling codes to allow more flexible dynamic ADC-switching with Realtek codecs. In the new code, the following strategy is taken: - When a cap-src can't handle all input-sources, either skip it, or switch to the ADC-switching mode. In ADC-switching mode, like the former dual-ADC mode for ALC275, it changes ADC on the fly according to the current input source. - When auto-mic is possible, always assign imux. If the mic pins are set statically via a quirk, rebuild imux according to the pins. In the auto-mic mode, the driver always changes the imux (although the imux isn't exposed as a mixer element). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 15:01:13 +02:00
}
ALSA: hda - Add support for Line-Out automute to Realtek auto-parser By popular demands, I add the functionality to mute / unmute the line-out jacks per the headphone plug / unplug. For achieving this and keeping the compatibility with the old behavior, the new mixer enum "Auto-Mute Mode" is added. With this, user can control the auto-mute behavior either disabled, speaker-only or lineout+speaker. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-28 17:36:18 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/*
* COEF access helper functions
*/
ALSA: hda - Add ALC661/259, ALC892/888VD support Fixed List: 1. Add alc_read_coef_idx function 2. Add ALC661 ALC259 3. Add ALC892 ALC888VD Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-03 10:07:50 +01:00
static int alc_read_coef_idx(struct hda_codec *codec,
unsigned int coef_idx)
{
unsigned int val;
snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_COEF_INDEX,
coef_idx);
val = snd_hda_codec_read(codec, 0x20, 0,
AC_VERB_GET_PROC_COEF, 0);
return val;
}
ALSA: hda - Set up COEFs for ALC269 to avoid click noises at power-saving For avoiding the click noises at power-saving, set some COEF values for ALC269* codecs. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-15 10:02:29 +02:00
static void alc_write_coef_idx(struct hda_codec *codec, unsigned int coef_idx,
unsigned int coef_val)
{
snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_COEF_INDEX,
coef_idx);
snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_PROC_COEF,
coef_val);
}
ALSA: hda/realtek - Cache COEF 0 value The COEF #0 value represents a sort of device id, so it's supposedly constant while operation. Better to use the cached value instead of reading it at each time from the performance POV. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:50:59 +02:00
/* a special bypass for COEF 0; read the cached value at the second time */
static unsigned int alc_get_coef0(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
if (!spec->coef0)
spec->coef0 = alc_read_coef_idx(codec, 0);
return spec->coef0;
}
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/*
ALSA: hda: Added an ALC888 model entry for Fujitsu-Siemens Amilo Xa3530 This patch fixes the bug 0004240: ALC888 - Intel HDA - Headphone Controlling. It is made against the 2008-11-23 snapshot. Added Realtek ALC888 model entry for the Fujitsu-Siemens Amilo Xa3530 laptop. It has 4 jacks: HP out, Mic-in, Line-in and Line-out/Side/SPDIF (this one is on the laptop side, the other ones are on the rear). Model detection works. Headphone jack sense works now. Front mic works now, was same as Acer Aspire 4930G. Added channel mode from 2 to 8 channels. In 2ch and 4ch modes, the front is also sent to the Line-out/side jack for convenience instead of just muting the Line-out/side jack like other models do. When using the Mic-in jack as CLFE, the sound is very low (bug?). To work it around, in 6ch mode the CLFE channel is duplicated to the Line-out/side jack because this one has a better amp. Cc: manu@frogged.de Signed-off-by: Vincent Petry <PVince81@yahoo.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-23 11:31:41 +08:00
*/
ALSA: hda - Unify capture mixer creation in realtek codes Unified the capture mixer creation in patch_realtek.c. ALC268 is still an exception since it has no AMP in ADC but in MUX widget. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-31 16:37:07 +01:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
static hda_nid_t get_adc_nid(struct hda_codec *codec, int adc_idx, int imux_idx)
ALSA: hda - Unify capture mixer creation in realtek codes Unified the capture mixer creation in patch_realtek.c. ALC268 is still an exception since it has no AMP in ADC but in MUX widget. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-31 16:37:07 +01:00
{
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
struct hda_gen_spec *spec = codec->spec;
if (spec->dyn_adc_switch)
adc_idx = spec->dyn_adc_idx[imux_idx];
return spec->adc_nids[adc_idx];
ALSA: hda - Unify capture mixer creation in realtek codes Unified the capture mixer creation in patch_realtek.c. ALC268 is still an exception since it has no AMP in ADC but in MUX widget. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-31 16:37:07 +01:00
}
ALSA: hda/realtek - Make input path parser more generic Now we reached to the final big piece of parser rewrite: the input paths. While the old parser code assumes the more-or-less direct and similar connections from input pin to ADC, the new code handles the complete input paths. The capture source is switched by simple calls of activate_path() function. The parsing of capture volume and capture switches is, however, not fully generalized. It assumes that amps are available in the vicinity of ADCs (in three depth). This isn't perfect but it should cover all codecs I know of. Also, this commit removes some NID mapping of capture-related controls temporarily for simplicity. It'll be restored in later commits. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-17 20:29:29 +01:00
static void alc_inv_dmic_sync_adc(struct hda_codec *codec, int adc_idx)
ALSA: hda - Unify capture mixer creation in realtek codes Unified the capture mixer creation in patch_realtek.c. ALC268 is still an exception since it has no AMP in ADC but in MUX widget. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-31 16:37:07 +01:00
{
struct alc_spec *spec = codec->spec;
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
struct hda_input_mux *imux = &spec->gen.input_mux;
ALSA: hda/realtek - Make input path parser more generic Now we reached to the final big piece of parser rewrite: the input paths. While the old parser code assumes the more-or-less direct and similar connections from input pin to ADC, the new code handles the complete input paths. The capture source is switched by simple calls of activate_path() function. The parsing of capture volume and capture switches is, however, not fully generalized. It assumes that amps are available in the vicinity of ADCs (in three depth). This isn't perfect but it should cover all codecs I know of. Also, this commit removes some NID mapping of capture-related controls temporarily for simplicity. It'll be restored in later commits. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-17 20:29:29 +01:00
struct nid_path *path;
hda_nid_t nid;
int i, dir, parm;
unsigned int val;
ALSA: hda - Unify capture mixer creation in realtek codes Unified the capture mixer creation in patch_realtek.c. ALC268 is still an exception since it has no AMP in ADC but in MUX widget. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-31 16:37:07 +01:00
ALSA: hda/realtek - Make input path parser more generic Now we reached to the final big piece of parser rewrite: the input paths. While the old parser code assumes the more-or-less direct and similar connections from input pin to ADC, the new code handles the complete input paths. The capture source is switched by simple calls of activate_path() function. The parsing of capture volume and capture switches is, however, not fully generalized. It assumes that amps are available in the vicinity of ADCs (in three depth). This isn't perfect but it should cover all codecs I know of. Also, this commit removes some NID mapping of capture-related controls temporarily for simplicity. It'll be restored in later commits. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-17 20:29:29 +01:00
for (i = 0; i < imux->num_items; i++) {
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
if (spec->gen.imux_pins[i] == spec->inv_dmic_pin)
ALSA: hda/realtek - Make input path parser more generic Now we reached to the final big piece of parser rewrite: the input paths. While the old parser code assumes the more-or-less direct and similar connections from input pin to ADC, the new code handles the complete input paths. The capture source is switched by simple calls of activate_path() function. The parsing of capture volume and capture switches is, however, not fully generalized. It assumes that amps are available in the vicinity of ADCs (in three depth). This isn't perfect but it should cover all codecs I know of. Also, this commit removes some NID mapping of capture-related controls temporarily for simplicity. It'll be restored in later commits. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-17 20:29:29 +01:00
break;
ALSA: hda - Don't create empty/single-item input source In patch_realtek.c, don't create empty or single-item "Input Source" control elements that are simply superfluous. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-23 15:21:36 +01:00
}
ALSA: hda/realtek - Make input path parser more generic Now we reached to the final big piece of parser rewrite: the input paths. While the old parser code assumes the more-or-less direct and similar connections from input pin to ADC, the new code handles the complete input paths. The capture source is switched by simple calls of activate_path() function. The parsing of capture volume and capture switches is, however, not fully generalized. It assumes that amps are available in the vicinity of ADCs (in three depth). This isn't perfect but it should cover all codecs I know of. Also, this commit removes some NID mapping of capture-related controls temporarily for simplicity. It'll be restored in later commits. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-17 20:29:29 +01:00
if (i >= imux->num_items)
return;
ALSA: hda - Don't create empty/single-item input source In patch_realtek.c, don't create empty or single-item "Input Source" control elements that are simply superfluous. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-23 15:21:36 +01:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
path = snd_hda_get_nid_path(codec, spec->inv_dmic_pin,
get_adc_nid(codec, adc_idx, i));
ALSA: hda/realtek - Make input path parser more generic Now we reached to the final big piece of parser rewrite: the input paths. While the old parser code assumes the more-or-less direct and similar connections from input pin to ADC, the new code handles the complete input paths. The capture source is switched by simple calls of activate_path() function. The parsing of capture volume and capture switches is, however, not fully generalized. It assumes that amps are available in the vicinity of ADCs (in three depth). This isn't perfect but it should cover all codecs I know of. Also, this commit removes some NID mapping of capture-related controls temporarily for simplicity. It'll be restored in later commits. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-17 20:29:29 +01:00
val = path->ctls[NID_PATH_MUTE_CTL];
if (!val)
return;
nid = get_amp_nid_(val);
dir = get_amp_direction_(val);
parm = AC_AMP_SET_RIGHT |
(dir == HDA_OUTPUT ? AC_AMP_SET_OUTPUT : AC_AMP_SET_INPUT);
ALSA: hda - Don't create empty/single-item input source In patch_realtek.c, don't create empty or single-item "Input Source" control elements that are simply superfluous. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-23 15:21:36 +01:00
ALSA: hda - Flush dirty amp caches before writing inv_dmic fix The inverted dmic fix overwrites the right channel amp value, but it would work only when the amp values have been already actually written. Put snd_hda_codec_resume_amp() before the amp write for flushing caches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-20 11:33:20 +01:00
/* flush all cached amps at first */
ALSA: hda - Combine snd_hda_codec_flush_*_cache() to a single function Since both snd_hda_codec_flush_amp_cache() and snd_hda_codec_flush_cmd_cache() are called usually at the same time, we can simply combine them to a single function, snd_hda_codec_flush_cache(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-22 15:24:30 +01:00
snd_hda_codec_flush_cache(codec);
ALSA: hda - Don't create empty/single-item input source In patch_realtek.c, don't create empty or single-item "Input Source" control elements that are simply superfluous. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-23 15:21:36 +01:00
ALSA: hda/realtek - Make input path parser more generic Now we reached to the final big piece of parser rewrite: the input paths. While the old parser code assumes the more-or-less direct and similar connections from input pin to ADC, the new code handles the complete input paths. The capture source is switched by simple calls of activate_path() function. The parsing of capture volume and capture switches is, however, not fully generalized. It assumes that amps are available in the vicinity of ADCs (in three depth). This isn't perfect but it should cover all codecs I know of. Also, this commit removes some NID mapping of capture-related controls temporarily for simplicity. It'll be restored in later commits. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-17 20:29:29 +01:00
/* we care only right channel */
val = snd_hda_codec_amp_read(codec, nid, 1, dir, 0);
if (val & 0x80) /* if already muted, we don't need to touch */
return;
val |= 0x80;
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
parm | val);
ALSA: hda - Unify capture mixer creation in realtek codes Unified the capture mixer creation in patch_realtek.c. ALC268 is still an exception since it has no AMP in ADC but in MUX widget. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-31 16:37:07 +01:00
}
ALSA: hda - Add the inverted digital mic workaround to Realtek codecs Some laptops are equipped with ForteMedia digital mics that give the differential input. With such devices, summing stereo streams into a mono (like PulseAudio does) results in almost silence. This patch provides a workaround for this bug by adding a new mixer switch to turn on/off the right channel of digital mic, just like a similar fix for Conexant codecs. When the new switch "Inverted Internal Mic Capture Switch" is off and the current input source is the digital mic, the right channel of the recording stream is muted. When another input source is selected, the right channel is restored. Tested-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-22 14:30:29 +02:00
/*
* Inverted digital-mic handling
*
* First off, it's a bit tricky. The "Inverted Internal Mic Capture Switch"
* gives the additional mute only to the right channel of the digital mic
* capture stream. This is a workaround for avoiding the almost silence
* by summing the stereo stream from some (known to be ForteMedia)
* digital mic unit.
*
* The logic is to call alc_inv_dmic_sync() after each action (possibly)
* modifying ADC amp. When the mute flag is set, it mutes the R-channel
* without caching so that the cache can still keep the original value.
* The cached value is then restored when the flag is set off or any other
* than d-mic is used as the current input source.
*/
static void alc_inv_dmic_sync(struct hda_codec *codec, bool force)
{
struct alc_spec *spec = codec->spec;
ALSA: hda/realtek - Make input path parser more generic Now we reached to the final big piece of parser rewrite: the input paths. While the old parser code assumes the more-or-less direct and similar connections from input pin to ADC, the new code handles the complete input paths. The capture source is switched by simple calls of activate_path() function. The parsing of capture volume and capture switches is, however, not fully generalized. It assumes that amps are available in the vicinity of ADCs (in three depth). This isn't perfect but it should cover all codecs I know of. Also, this commit removes some NID mapping of capture-related controls temporarily for simplicity. It'll be restored in later commits. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-17 20:29:29 +01:00
int src, nums;
ALSA: hda - Add the inverted digital mic workaround to Realtek codecs Some laptops are equipped with ForteMedia digital mics that give the differential input. With such devices, summing stereo streams into a mono (like PulseAudio does) results in almost silence. This patch provides a workaround for this bug by adding a new mixer switch to turn on/off the right channel of digital mic, just like a similar fix for Conexant codecs. When the new switch "Inverted Internal Mic Capture Switch" is off and the current input source is the digital mic, the right channel of the recording stream is muted. When another input source is selected, the right channel is restored. Tested-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-22 14:30:29 +02:00
if (!spec->inv_dmic_fixup)
return;
if (!spec->inv_dmic_muted && !force)
return;
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
nums = spec->gen.dyn_adc_switch ? 1 : spec->gen.num_adc_nids;
ALSA: hda/realtek - Make input path parser more generic Now we reached to the final big piece of parser rewrite: the input paths. While the old parser code assumes the more-or-less direct and similar connections from input pin to ADC, the new code handles the complete input paths. The capture source is switched by simple calls of activate_path() function. The parsing of capture volume and capture switches is, however, not fully generalized. It assumes that amps are available in the vicinity of ADCs (in three depth). This isn't perfect but it should cover all codecs I know of. Also, this commit removes some NID mapping of capture-related controls temporarily for simplicity. It'll be restored in later commits. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-17 20:29:29 +01:00
for (src = 0; src < nums; src++) {
ALSA: hda - Add the inverted digital mic workaround to Realtek codecs Some laptops are equipped with ForteMedia digital mics that give the differential input. With such devices, summing stereo streams into a mono (like PulseAudio does) results in almost silence. This patch provides a workaround for this bug by adding a new mixer switch to turn on/off the right channel of digital mic, just like a similar fix for Conexant codecs. When the new switch "Inverted Internal Mic Capture Switch" is off and the current input source is the digital mic, the right channel of the recording stream is muted. When another input source is selected, the right channel is restored. Tested-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-22 14:30:29 +02:00
bool dmic_fixup = false;
if (spec->inv_dmic_muted &&
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
spec->gen.imux_pins[spec->gen.cur_mux[src]] == spec->inv_dmic_pin)
ALSA: hda - Add the inverted digital mic workaround to Realtek codecs Some laptops are equipped with ForteMedia digital mics that give the differential input. With such devices, summing stereo streams into a mono (like PulseAudio does) results in almost silence. This patch provides a workaround for this bug by adding a new mixer switch to turn on/off the right channel of digital mic, just like a similar fix for Conexant codecs. When the new switch "Inverted Internal Mic Capture Switch" is off and the current input source is the digital mic, the right channel of the recording stream is muted. When another input source is selected, the right channel is restored. Tested-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-22 14:30:29 +02:00
dmic_fixup = true;
if (!dmic_fixup && !force)
continue;
ALSA: hda/realtek - Make input path parser more generic Now we reached to the final big piece of parser rewrite: the input paths. While the old parser code assumes the more-or-less direct and similar connections from input pin to ADC, the new code handles the complete input paths. The capture source is switched by simple calls of activate_path() function. The parsing of capture volume and capture switches is, however, not fully generalized. It assumes that amps are available in the vicinity of ADCs (in three depth). This isn't perfect but it should cover all codecs I know of. Also, this commit removes some NID mapping of capture-related controls temporarily for simplicity. It'll be restored in later commits. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-17 20:29:29 +01:00
alc_inv_dmic_sync_adc(codec, src);
ALSA: hda - Add the inverted digital mic workaround to Realtek codecs Some laptops are equipped with ForteMedia digital mics that give the differential input. With such devices, summing stereo streams into a mono (like PulseAudio does) results in almost silence. This patch provides a workaround for this bug by adding a new mixer switch to turn on/off the right channel of digital mic, just like a similar fix for Conexant codecs. When the new switch "Inverted Internal Mic Capture Switch" is off and the current input source is the digital mic, the right channel of the recording stream is muted. When another input source is selected, the right channel is restored. Tested-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-22 14:30:29 +02:00
}
}
ALSA: hda - Consolidate cap_sync_hook and capture_switch_hook Two hooks in hda_gen_spec, cap_sync_hook and capture_switch_hook, play very similar roles. The only differences are that the former is called more often (e.g. at init or switching capsrc) while the latter can take an on/off argument. As a more generic implementation, consolidate these two hooks, and pass snd_ctl_elem_value pointer as the second argument. If the secondary argument is non-NULL, it can take the on/off value, so the caller handles it like the former capture_switch_hook. If it's NULL, it's called in the init or capsrc switch case. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18 14:10:00 +01:00
static void alc_inv_dmic_hook(struct hda_codec *codec,
struct snd_ctl_elem_value *ucontrol)
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
{
alc_inv_dmic_sync(codec, false);
}
ALSA: hda - Add the inverted digital mic workaround to Realtek codecs Some laptops are equipped with ForteMedia digital mics that give the differential input. With such devices, summing stereo streams into a mono (like PulseAudio does) results in almost silence. This patch provides a workaround for this bug by adding a new mixer switch to turn on/off the right channel of digital mic, just like a similar fix for Conexant codecs. When the new switch "Inverted Internal Mic Capture Switch" is off and the current input source is the digital mic, the right channel of the recording stream is muted. When another input source is selected, the right channel is restored. Tested-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-22 14:30:29 +02:00
static int alc_inv_dmic_sw_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct alc_spec *spec = codec->spec;
ucontrol->value.integer.value[0] = !spec->inv_dmic_muted;
return 0;
}
static int alc_inv_dmic_sw_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct alc_spec *spec = codec->spec;
unsigned int val = !ucontrol->value.integer.value[0];
if (val == spec->inv_dmic_muted)
return 0;
spec->inv_dmic_muted = val;
alc_inv_dmic_sync(codec, true);
return 0;
}
static const struct snd_kcontrol_new alc_inv_dmic_sw = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
ALSA: hda/realtek - Allow passing name=NULL to alc_kcontrol_new() This prevents stupid typos. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-18 15:35:11 +01:00
.name = "Inverted Internal Mic Capture Switch",
ALSA: hda - Add the inverted digital mic workaround to Realtek codecs Some laptops are equipped with ForteMedia digital mics that give the differential input. With such devices, summing stereo streams into a mono (like PulseAudio does) results in almost silence. This patch provides a workaround for this bug by adding a new mixer switch to turn on/off the right channel of digital mic, just like a similar fix for Conexant codecs. When the new switch "Inverted Internal Mic Capture Switch" is off and the current input source is the digital mic, the right channel of the recording stream is muted. When another input source is selected, the right channel is restored. Tested-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-22 14:30:29 +02:00
.info = snd_ctl_boolean_mono_info,
.get = alc_inv_dmic_sw_get,
.put = alc_inv_dmic_sw_put,
};
static int alc_add_inv_dmic_mixer(struct hda_codec *codec, hda_nid_t nid)
{
struct alc_spec *spec = codec->spec;
ALSA: hda - Refactor alc_kcontrol_new() usages Allocate the name string and assign the structure in alc_kcontrol_new() itself to reduce the code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-29 14:10:17 +01:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
if (!snd_hda_gen_add_kctl(&spec->gen, NULL, &alc_inv_dmic_sw))
ALSA: hda - Add the inverted digital mic workaround to Realtek codecs Some laptops are equipped with ForteMedia digital mics that give the differential input. With such devices, summing stereo streams into a mono (like PulseAudio does) results in almost silence. This patch provides a workaround for this bug by adding a new mixer switch to turn on/off the right channel of digital mic, just like a similar fix for Conexant codecs. When the new switch "Inverted Internal Mic Capture Switch" is off and the current input source is the digital mic, the right channel of the recording stream is muted. When another input source is selected, the right channel is restored. Tested-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-22 14:30:29 +02:00
return -ENOMEM;
spec->inv_dmic_fixup = 1;
spec->inv_dmic_muted = 0;
spec->inv_dmic_pin = nid;
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
spec->gen.cap_sync_hook = alc_inv_dmic_hook;
ALSA: hda - Add the inverted digital mic workaround to Realtek codecs Some laptops are equipped with ForteMedia digital mics that give the differential input. With such devices, summing stereo streams into a mono (like PulseAudio does) results in almost silence. This patch provides a workaround for this bug by adding a new mixer switch to turn on/off the right channel of digital mic, just like a similar fix for Conexant codecs. When the new switch "Inverted Internal Mic Capture Switch" is off and the current input source is the digital mic, the right channel of the recording stream is muted. When another input source is selected, the right channel is restored. Tested-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-22 14:30:29 +02:00
return 0;
}
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
/* typically the digital mic is put at node 0x12 */
static void alc_fixup_inv_dmic_0x12(struct hda_codec *codec,
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
const struct hda_fixup *fix, int action)
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
{
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
if (action == HDA_FIXUP_ACT_PROBE)
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
alc_add_inv_dmic_mixer(codec, 0x12);
}
[ALSA] hda-codec - More fix of ALC880 codec support Documentation,HDA Codec driver,HDA generic driver,HDA Intel driver - Fix some invalid configurations, typos in the last patch - Make init_verbs chainable, so that different configs can share the same init_verbs - Reorder and clean up the source codes in patch_realtek.c - Add the pin default configuration parser, used commonly in cmedia and realtek patch codes. - Add 'auto' model to ALC880 for auto-configuration from BIOS Use this model as default, and 3-stack as fallback Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-13 14:16:38 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
#ifdef CONFIG_SND_HDA_INPUT_BEEP
/* additional beep mixers; the actual parameters are overwritten at build */
static const struct snd_kcontrol_new alc_beep_mixer[] = {
HDA_CODEC_VOLUME("Beep Playback Volume", 0, 0, HDA_INPUT),
HDA_CODEC_MUTE_BEEP("Beep Playback Switch", 0, 0, HDA_INPUT),
[ALSA] hda-codec - Add support of more models with ALC codecs HDA Codec driver,HDA Intel driver Merged the work of pshou <pshou@realtek.com.tw> for the support of more models with ALC codecs: ALC880 ASUS, Uniwill, FSC1734, generic 6-stack, and ALC260 HP. Tests with the real hardwares are appreciated. The codec patch is cleaned up: The preset configuration of codecs are stored in the table and copied to the spec instance. Added/fixed comments. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-10 19:58:24 +02:00
{ } /* end */
};
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
#endif
[ALSA] hda-codec - Add support of more models with ALC codecs HDA Codec driver,HDA Intel driver Merged the work of pshou <pshou@realtek.com.tw> for the support of more models with ALC codecs: ALC880 ASUS, Uniwill, FSC1734, generic 6-stack, and ALC260 HP. Tests with the real hardwares are appreciated. The codec patch is cleaned up: The preset configuration of codecs are stored in the table and copied to the spec instance. Added/fixed comments. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-10 19:58:24 +02:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
static int alc_build_controls(struct hda_codec *codec)
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{
struct alc_spec *spec = codec->spec;
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
int i, err;
ALSA: hda - Consolidate auto-mute with master-switch for Realtek Yet another consolidation of auto-mute functions for the devices controlling the output muts together with the master mixer switch, typically found for ALC262 machines. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-28 15:46:07 +02:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
err = snd_hda_gen_build_controls(codec);
if (err < 0)
return err;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
for (i = 0; i < spec->num_mixers; i++) {
err = snd_hda_add_new_ctls(codec, spec->mixers[i]);
if (err < 0)
return err;
}
[ALSA] hda-codec - Add virtual master controls Add master controls using vmaster to codecs that have no real hardware master volume registers. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-10 16:53:55 +01:00
ALSA: hda - Fix build errors with CONFIG_SND_HDA_INPUT_BEEP=n Disable beep-related codes when CONFIG_SND_HDA_INPUT_BEEP isn't set. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16 15:35:59 +01:00
#ifdef CONFIG_SND_HDA_INPUT_BEEP
ALSA: hda - Create beep mixer controls dynamically for Realtek codecs Create beep mixer controls dynamically for Realtek codecs instead of static arrays. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-06 16:11:25 +01:00
/* create beep controls if needed */
if (spec->beep_amp) {
ALSA: hda - Constify fixup and other array data in patch_realtek.c Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02 11:30:18 +02:00
const struct snd_kcontrol_new *knew;
ALSA: hda - Create beep mixer controls dynamically for Realtek codecs Create beep mixer controls dynamically for Realtek codecs instead of static arrays. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-06 16:11:25 +01:00
for (knew = alc_beep_mixer; knew->name; knew++) {
struct snd_kcontrol *kctl;
kctl = snd_ctl_new1(knew, codec);
if (!kctl)
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
return -ENOMEM;
kctl->private_value = spec->beep_amp;
err = snd_hda_ctl_add(codec, 0, kctl);
if (err < 0)
return err;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
}
ALSA: hda - Fix conflicting volume controls on ALC260 ALC260 auto-parsing mode may create multiple controls for the same volume widget (0x08 and 0x09) depending on the pin. For example, Front and Headphone volumes may control the same volume, just the latter one wins. This patch adds a proper check of the existing of the volume control and avoid the doulbed creation of the same volume controls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-21 17:01:47 +02:00
}
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
#endif
ALSA: hda/realtek - Finer tuning of auto-parser with badness evaluation This patch improves the Realtek auto-parser for assigning the DACs and mixers in more suitable ways by evaluating the assignment with "badness" calculations. When assigning a DAC hinders the assignment of individual DACs for other pins, some badness point is given. Similarly, when it blocks the assignment of unique mixer controls, another badness point is added. Also, if no DAC, even shared DAC, can be assigned, more badness is pointed. Finally, comparing the accumulated badness, the best route is chosen among several trials. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 16:45:59 +01:00
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_BUILD);
ALSA: hda/realtek - Finer tuning of auto-parser with badness evaluation This patch improves the Realtek auto-parser for assigning the DACs and mixers in more suitable ways by evaluating the assignment with "badness" calculations. When assigning a DAC hinders the assignment of individual DACs for other pins, some badness point is given. Similarly, when it blocks the assignment of unique mixer controls, another badness point is added. Also, if no DAC, even shared DAC, can be assigned, more badness is pointed. Finally, comparing the accumulated badness, the best route is chosen among several trials. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 16:45:59 +01:00
return 0;
[ALSA] hda-codec - Add support of ALC268 codec Added the support of new ALC268 codec chip. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-06-05 12:30:55 +02:00
}
[ALSA] hda-codec - Add the support of ALC262,ALC883,ALC885,ALC861 Modules: HDA Codec driver,HDA generic driver This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver More models and improvements for ALC880, ALC260 and ALC882 codecs, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-12-05 19:42:22 +01:00
/*
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
* Common callbacks
[ALSA] hda-codec - Add the support of ALC262,ALC883,ALC885,ALC861 Modules: HDA Codec driver,HDA generic driver This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver More models and improvements for ALC880, ALC260 and ALC882 codecs, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-12-05 19:42:22 +01:00
*/
[ALSA] hda-codec - Add support of ALC268 codec Added the support of new ALC268 codec chip. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-06-05 12:30:55 +02:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
static int alc_init(struct hda_codec *codec)
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{
struct alc_spec *spec = codec->spec;
[ALSA] hda-codec - Add support of ALC268 codec Added the support of new ALC268 codec chip. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-06-05 12:30:55 +02:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
if (spec->init_hook)
spec->init_hook(codec);
[ALSA] hda-codec - Add support of ALC268 codec Added the support of new ALC268 codec chip. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-06-05 12:30:55 +02:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
alc_fix_pll(codec);
alc_auto_init_amp(codec, spec->init_amp);
ALSA: hda - Fix probe of Toshiba laptops with ALC268 codec There are many variants of Toshiba laptops with ALC268 codec, and it seems that a few of them don't work with model=toshiba preset since they have the secondary ALC268 codec just for HDMI output. This is a regression due to the previous clean-up work to merge all Toshiba quirk entries into a single check. This patch adds the identification of such laptops to apply the standard BIOS-probing method. Unfortunately, Toshiba laptops have all the same PCI SSID, so we need to check the codec SSID to identify each device. Tested-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-19 20:05:02 +02:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
snd_hda_gen_init(codec);
[ALSA] hda-codec - Add support of ALC268 codec Added the support of new ALC268 codec chip. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-06-05 12:30:55 +02:00
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_INIT);
[ALSA] hda-codec - Add support of ALC268 codec Added the support of new ALC268 codec chip. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-06-05 12:30:55 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
return 0;
}
[ALSA] hda-codec - Add support of ALC268 codec Added the support of new ALC268 codec chip. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-06-05 12:30:55 +02:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
static inline void alc_shutup(struct hda_codec *codec)
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{
struct alc_spec *spec = codec->spec;
[ALSA] hda-codec - Add support of ALC268 codec Added the support of new ALC268 codec chip. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-06-05 12:30:55 +02:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
if (spec && spec->shutup)
spec->shutup(codec);
snd_hda_shutup_pins(codec);
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
}
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
static void alc_free(struct hda_codec *codec)
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{
struct alc_spec *spec = codec->spec;
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
if (!spec)
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
return;
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
snd_hda_gen_spec_free(&spec->gen);
snd_hda_detach_beep_device(codec);
kfree(spec);
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
}
[ALSA] hda-codec - Add virtual master controls Add master controls using vmaster to codecs that have no real hardware master volume registers. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-10 16:53:55 +01:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
#ifdef CONFIG_PM
static void alc_power_eapd(struct hda_codec *codec)
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
alc_auto_setup_eapd(codec, false);
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
}
[ALSA] hda-codec - Add virtual master controls Add master controls using vmaster to codecs that have no real hardware master volume registers. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-10 16:53:55 +01:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
static int alc_suspend(struct hda_codec *codec)
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{
struct alc_spec *spec = codec->spec;
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
alc_shutup(codec);
if (spec && spec->power_hook)
spec->power_hook(codec);
[ALSA] hda-codec - Add support of ALC268 codec Added the support of new ALC268 codec chip. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-06-05 12:30:55 +02:00
return 0;
}
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
#endif
[ALSA] hda-codec - Add support of ALC268 codec Added the support of new ALC268 codec chip. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-06-05 12:30:55 +02:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
#ifdef CONFIG_PM
static int alc_resume(struct hda_codec *codec)
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
msleep(150); /* to avoid pop noise */
codec->patch_ops.init(codec);
snd_hda_codec_resume_amp(codec);
snd_hda_codec_resume_cache(codec);
alc_inv_dmic_sync(codec, true);
hda_call_check_power_status(codec, 0x01);
return 0;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
}
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
#endif
[ALSA] hda-codec - Add ALC889/ALC267/ALC269 support Added the support of new Realtek codecs: 1. New ALC889 Support 2. New ALC267 Support 3. New ALC269 Support Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-12-13 16:52:54 +01:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/*
*/
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
static const struct hda_codec_ops alc_patch_ops = {
.build_controls = alc_build_controls,
.build_pcms = snd_hda_gen_build_pcms,
.init = alc_init,
.free = alc_free,
.unsol_event = snd_hda_jack_unsol_event,
#ifdef CONFIG_PM
.resume = alc_resume,
.suspend = alc_suspend,
ALSA: hda - Add snd_hda_gen_free() and snd_hda_gen_check_power_status() Just to remove duplicated codes. Also fixed EXPORT_SYMBOL() in hda_generic.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-07 12:42:48 +01:00
.check_power_status = snd_hda_gen_check_power_status,
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
#endif
.reboot_notify = alc_shutup,
};
[ALSA] hda-codec - Add ALC889/ALC267/ALC269 support Added the support of new Realtek codecs: 1. New ALC889 Support 2. New ALC267 Support 3. New ALC269 Support Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-12-13 16:52:54 +01:00
ALSA: hda - Add support of ASUS Eeepc P90* - Support ASUS_P900A = P703 - Support ASUS_P901 Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-18 12:36:43 +02:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
/* replace the codec chip_name with the given string */
static int alc_codec_rename(struct hda_codec *codec, const char *name)
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
kfree(codec->chip_name);
codec->chip_name = kstrdup(name, GFP_KERNEL);
if (!codec->chip_name) {
alc_free(codec);
return -ENOMEM;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
}
[ALSA] hda-codec - Add support of ALC268 codec Added the support of new ALC268 codec chip. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-06-05 12:30:55 +02:00
return 0;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
}
ALSA: hda - Fix ALC269 capture source ALC269 capture source wasn't properly set up. It's an independent MUX (0x23), not a source of ADC. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-21 16:25:07 +02:00
ALSA: hda - Provide the standard auto_init for Realtek codecs Remove redundant definitions. Ideally, all init functions should be identical in future. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 11:11:35 +02:00
/*
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
* Rename codecs appropriately from COEF value
ALSA: hda - Provide the standard auto_init for Realtek codecs Remove redundant definitions. Ideally, all init functions should be identical in future. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 11:11:35 +02:00
*/
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
struct alc_codec_rename_table {
unsigned int vendor_id;
unsigned short coef_mask;
unsigned short coef_bits;
const char *name;
};
ALSA: hda - Add ALC269VB support - Add new models ALC269VB_AMIC ALC269VB_DMIC - Add alc269vb_laptop_dmic_setup The record source index Dmic is 0x6 for ALC269VB. - Change eeepc words for ALC269 - Modify init_verb tables of patch_alc269 patch_alc662 patch_alc882 - Modify common patch for ALC270 ALC269VB ALC275 Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-04 14:16:14 +01:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
static struct alc_codec_rename_table rename_tbl[] = {
{ 0x10ec0269, 0xfff0, 0x3010, "ALC277" },
{ 0x10ec0269, 0xf0f0, 0x2010, "ALC259" },
{ 0x10ec0269, 0xf0f0, 0x3010, "ALC258" },
{ 0x10ec0269, 0x00f0, 0x0010, "ALC269VB" },
{ 0x10ec0269, 0xffff, 0xa023, "ALC259" },
{ 0x10ec0269, 0xffff, 0x6023, "ALC281X" },
{ 0x10ec0269, 0x00f0, 0x0020, "ALC269VC" },
{ 0x10ec0269, 0x00f0, 0x0030, "ALC269VD" },
{ 0x10ec0887, 0x00f0, 0x0030, "ALC887-VD" },
{ 0x10ec0888, 0x00f0, 0x0030, "ALC888-VD" },
{ 0x10ec0888, 0xf0f0, 0x3020, "ALC886" },
{ 0x10ec0899, 0x2000, 0x2000, "ALC899" },
{ 0x10ec0892, 0xffff, 0x8020, "ALC661" },
{ 0x10ec0892, 0xffff, 0x8011, "ALC661" },
{ 0x10ec0892, 0xffff, 0x4011, "ALC656" },
{ } /* terminator */
};
ALSA: hda - Add ALC269VB support - Add new models ALC269VB_AMIC ALC269VB_DMIC - Add alc269vb_laptop_dmic_setup The record source index Dmic is 0x6 for ALC269VB. - Change eeepc words for ALC269 - Modify init_verb tables of patch_alc269 patch_alc662 patch_alc882 - Modify common patch for ALC270 ALC269VB ALC275 Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-04 14:16:14 +01:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
static int alc_codec_rename_from_preset(struct hda_codec *codec)
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
const struct alc_codec_rename_table *p;
ALSA: hda - Add support of Quanta FL1 Added the support of Quanta FL1 with ALC269 code chip. Also a bit space clean-ups. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-26 13:13:00 +02:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
for (p = rename_tbl; p->vendor_id; p++) {
if (p->vendor_id != codec->vendor_id)
continue;
if ((alc_get_coef0(codec) & p->coef_mask) == p->coef_bits)
return alc_codec_rename(codec, p->name);
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
}
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
return 0;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
}
ALSA: hda - Add support of ASUS Eeepc P90* - Support ASUS_P900A = P703 - Support ASUS_P901 Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-18 12:36:43 +02:00
ALSA: hda - Provide the standard auto_init for Realtek codecs Remove redundant definitions. Ideally, all init functions should be identical in future. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 11:11:35 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/*
* Digital-beep handlers
*/
#ifdef CONFIG_SND_HDA_INPUT_BEEP
#define set_beep_amp(spec, nid, idx, dir) \
((spec)->beep_amp = HDA_COMPOSE_AMP_VAL(nid, 3, idx, dir))
ALSA: hda - Add ALC269VB support - Add new models ALC269VB_AMIC ALC269VB_DMIC - Add alc269vb_laptop_dmic_setup The record source index Dmic is 0x6 for ALC269VB. - Change eeepc words for ALC269 - Modify init_verb tables of patch_alc269 patch_alc662 patch_alc882 - Modify common patch for ALC270 ALC269VB ALC275 Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-04 14:16:14 +01:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
static const struct snd_pci_quirk beep_white_list[] = {
ALSA: hda - Fix missing beep on ASUS X43U notebook Signed-off-by: Duncan Roe <duncan_roe@acslink.net.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-10 14:19:50 +02:00
SND_PCI_QUIRK(0x1043, 0x103c, "ASUS", 1),
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
SND_PCI_QUIRK(0x1043, 0x829f, "ASUS", 1),
ALSA: hda - Enable beep for ASUS EeeBox EBP1501P Reported-by: Harald Becker <ralda@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-25 09:54:43 +01:00
SND_PCI_QUIRK(0x1043, 0x8376, "EeePC", 1),
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
SND_PCI_QUIRK(0x1043, 0x83ce, "EeePC", 1),
SND_PCI_QUIRK(0x1043, 0x831a, "EeePC", 1),
SND_PCI_QUIRK(0x1043, 0x834a, "EeePC", 1),
ALSA: hda - Add Gigabyte GA-MA790X to the beep whitelist Its BIOS suppresses the PC beep although it's implemented. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-06 14:02:32 +01:00
SND_PCI_QUIRK(0x1458, 0xa002, "GA-MA790X", 1),
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
SND_PCI_QUIRK(0x8086, 0xd613, "Intel", 1),
{}
ALSA: hda - Add support for Acer ZGA ALC271 (1025:047c) Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-06 10:02:57 +02:00
};
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
static inline int has_cdefine_beep(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
const struct snd_pci_quirk *q;
q = snd_pci_quirk_lookup(codec->bus->pci, beep_white_list);
if (q)
return q->value;
return spec->cdefine.enable_pcbeep;
}
#else
#define set_beep_amp(spec, nid, idx, dir) /* NOP */
#define has_cdefine_beep(codec) 0
#endif
ALSA: hda - Add ALC269VB support - Add new models ALC269VB_AMIC ALC269VB_DMIC - Add alc269vb_laptop_dmic_setup The record source index Dmic is 0x6 for ALC269VB. - Change eeepc words for ALC269 - Modify init_verb tables of patch_alc269 patch_alc662 patch_alc882 - Modify common patch for ALC270 ALC269VB ALC275 Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-04 14:16:14 +01:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/* parse the BIOS configuration and set up the alc_spec */
/* return 1 if successful, 0 if the proper config is not found,
* or a negative error code
*/
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
static int alc_parse_auto_config(struct hda_codec *codec,
const hda_nid_t *ignore_nids,
const hda_nid_t *ssid_nids)
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{
struct alc_spec *spec = codec->spec;
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
struct auto_pin_cfg *cfg = &spec->gen.autocfg;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
int err;
ALSA: hda - Add ALC299 fujitsu preset model Added a preset model for FSC Amilo with ALC269 codec chip. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-03 17:39:46 +01:00
ALSA: hda - Rewrite ALC662 asus-mode* models with fixups Re-implement the asus-mode[1-8] quirks with the pin-config tables. They are provided in case where BIOS is broken on the device, so it's not enabled in PCI SSID lookup table. User needs to specify it via model option explicitly if the driver doesn't work with the BIOS setup as is. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:27:14 +02:00
err = snd_hda_parse_pin_defcfg(codec, cfg, ignore_nids,
spec->parse_flags);
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
if (err < 0)
return err;
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
if (ssid_nids)
alc_ssid_check(codec, ssid_nids);
ALSA: hda - Add lifebook model for Realtek ALC269 The widget layout of the Fujitsu Lifebook S6420 (which is ICH9M-based and uses an ALC269) is similar but not identical to the Lifebook S6410/E8410 (which are ICH8M-based and use an ALC262). It is named lifebook as fujitsu is in use for Amilo machines. This builds on the Quanta FL1 work and supports all analog inputs & outputs that I am aware of. Microphone autoswitch is implemented. The laptop mic port takes precedence over the dock mic port if both happen to have a jack plugged in. This made sense to me as a design decision (imagine a presentation environment with the dock fully wired in and the presenter quickly wanting to override the mic with a headset). There is mention of a digital audio path on the codec graph, so perhaps the headphone socket is dual-function analog/digital. I will follow up with another patch if I can acquire equipment to test this. Signed-off-by: Tony Vroon <tony@linx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-06 15:08:49 +00:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
err = snd_hda_gen_parse_auto_config(codec, cfg);
if (err < 0)
return err;
ALSA: hda/realtek - Small code cleanups A few clean-ups for post-static-quirk time: - Call alc_auto_init_std() statically in alc_init() instead of setting spec->init_hook in each caller. spec->init_hook field is left unused for any future use. - Move the call of set_capture_mixer() to to alc_parse_auto_config() instead of each caller. - Get rid of the ADC-filling and imux check in each parser function. This is no longer needed since the auto-parser always check ADCs and imux. It was only for the static quirks. - Kill unused defines Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 12:54:17 +01:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
return 1;
ALSA: hda - Add support of Quanta FL1 Added the support of Quanta FL1 with ALC269 code chip. Also a bit space clean-ups. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-26 13:13:00 +02:00
}
[ALSA] hda-codec - Add ALC889/ALC267/ALC269 support Added the support of new Realtek codecs: 1. New ALC889 Support 2. New ALC267 Support 3. New ALC269 Support Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-12-13 16:52:54 +01:00
ALSA: hda/realtek - Call a common helper for alc_spec initialization Just a clean up by calling the same helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 18:03:15 +02:00
/* common preparation job for alc_spec */
static int alc_alloc_spec(struct hda_codec *codec, hda_nid_t mixer_nid)
{
struct alc_spec *spec = kzalloc(sizeof(*spec), GFP_KERNEL);
int err;
if (!spec)
return -ENOMEM;
codec->spec = spec;
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
snd_hda_gen_spec_init(&spec->gen);
spec->gen.mixer_nid = mixer_nid;
spec->gen.own_eapd_ctl = 1;
ALSA: hda - Set codec->single_adc_amp flag for Realtek codecs It turned out that Realtek codecs (ALC260, etc) with input amps in audio-input widgets don't handle the multiple individual input amps. Thus we need to set codec->single_adc_amp flag for them in general. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-17 20:03:15 +01:00
codec->single_adc_amp = 1;
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
/* FIXME: do we need this for all Realtek codec models? */
codec->spdif_status_reset = 1;
ALSA: hda/realtek - Call a common helper for alc_spec initialization Just a clean up by calling the same helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 18:03:15 +02:00
err = alc_codec_rename_from_preset(codec);
if (err < 0) {
kfree(spec);
return err;
}
return 0;
}
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
static int alc880_parse_auto_config(struct hda_codec *codec)
{
static const hda_nid_t alc880_ignore[] = { 0x1d, 0 };
ALSA: hda/realtek - Fix mem leak (and rid us of trailing whitespace). In sound/pci/hda/patch_realtek.c::alc_auto_fill_dac_nids(), in the 'for (;;)' loop, if the 'badness' value returned from fill_and_eval_dacs() is negative, then we'll return from the function without freeing the memory we allocated for 'best_cfg', thus leaking. Fix the leak by kfree()'ing the memory when badness is negative. While I was there I also noticed some trailing whitespace in the function that I removed (along with all other trailing whitespace in the file) - it didn't seem worth-while to do that as two patches, so I hope it's OK that I just did it all as one patch. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-12 22:11:25 +02:00
static const hda_nid_t alc880_ssids[] = { 0x15, 0x1b, 0x14, 0 };
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
return alc_parse_auto_config(codec, alc880_ignore, alc880_ssids);
}
ALSA: hda/realtek - Move ALC880 model=medion-rim to auto-parser Translate ALC880 medion-rim static configs to the auto-parser with the additional GPIO2 verb and COEF setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-15 14:26:54 +01:00
/*
* ALC880 fix-ups
*/
enum {
ALSA: hda/realtek - Rewrite ALC880 model=asus-w1v with auto-parser ASUS W1V has a sane pin-config table set by BIOS. The only missing piece is the setup of GPIO1. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 17:48:19 +01:00
ALC880_FIXUP_GPIO1,
ALSA: hda/realtek - Move ALC880 model=medion-rim to auto-parser Translate ALC880 medion-rim static configs to the auto-parser with the additional GPIO2 verb and COEF setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-15 14:26:54 +01:00
ALC880_FIXUP_GPIO2,
ALC880_FIXUP_MEDION_RIM,
ALSA: hda/realtek - Rewrite ALC880 model=lg with the auto-parser ALC880 model=lg could work fine with the auto-parser due to the recent rewrite, but it still needs the manual adjustment; namely, the BIOS leaves unused pins as some real active jacks. This confuses the parser. Thus we just cover these pins and override the pin-configs as a fix-up. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17 16:18:59 +01:00
ALC880_FIXUP_LG,
ALSA: hda/realtek - Rewrite ALC880 model=w810 with auto-parser The Medion W810 with ALC880 has a typical BIOS bug, copying the pin-defaults without disabling the unused pins. At least, the pin 0x17 must be disabled. Also, it requires GPIO-2 setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17 16:33:56 +01:00
ALC880_FIXUP_W810,
ALSA: hda/realtek - Drop ALC880 model=clevo Clevo machines with ALC880 are all well with proper BIOS setup. It seems still requiring the additional COEF setup for the EAPD. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17 17:49:54 +01:00
ALC880_FIXUP_EAPD_COEF,
ALSA: hda/realtek - Replace ALC880 model=tcl with auto-parser It needs a few extra setups for EAPD, but others look fairly straightforward. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17 17:54:44 +01:00
ALC880_FIXUP_TCL_S700,
ALSA: hda/realtek - Rewrite ALC880 model=futjisu with auto-parser Now adding the support for the volume-knob widget, we can move the static quirk for ALC880 model=fujitsu to the auto-parser completely. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 16:31:07 +01:00
ALC880_FIXUP_VOL_KNOB,
ALC880_FIXUP_FUJITSU,
ALSA: hda/realtek - Rewrite ALC880 model=F1734 with auto-parser Similar as the previous patch for model=fujitsu, we can now move the static quirk for F1734 to the auto-parser. The only difference is the default pin configurations: F1734 has less pins than Amilo's. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 16:36:52 +01:00
ALC880_FIXUP_F1734,
ALSA: hda/realtek - Rewrite ALC880 model=uniwill with auto-parser The model=uniwill would work almost as is, but a couple of adjustments are needed to make the mutli-io working correctly. The headphone and speaker pins have to be marked properly in pin configs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 17:20:48 +01:00
ALC880_FIXUP_UNIWILL,
ALSA: hda/realtek - Rewrite ALC880 model=uniwill-dig with auto-parser ALC880 model=uniwill-dig requires the fix-up of bogus BIOS pin default configurations. Other than that, it's pretty normal. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 17:31:02 +01:00
ALC880_FIXUP_UNIWILL_DIG,
ALSA: hda/realtek - Rewrite ALC880 model=z71v with auto-parser ASUS Z71V has a totally broken BIOS setup (at least the info I got), thus we need to override the whole pin-config table to make the auto-parser working correctly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 17:41:51 +01:00
ALC880_FIXUP_Z71V,
ALSA: hda/realtek - Drop all ALC880 static quirks Finally the all static quirks for ALC880 are converted to the auto-parser. Since we are never sure whether the BIOS on so many old machines are really correct, the quirk table entries are copied as they are, but just providing the proper pin-config values accordingly. Since alc880_quirks.c is removed, alc882_quirks.c has to be adjusted slightly to be built again. There might be some compile warnings due to the remaining alc882 quirks, but these shall be killed sooner or later, I don't care it much at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 18:20:42 +01:00
ALC880_FIXUP_3ST_BASE,
ALC880_FIXUP_3ST,
ALC880_FIXUP_3ST_DIG,
ALC880_FIXUP_5ST_BASE,
ALC880_FIXUP_5ST,
ALC880_FIXUP_5ST_DIG,
ALC880_FIXUP_6ST_BASE,
ALC880_FIXUP_6ST,
ALC880_FIXUP_6ST_DIG,
ALSA: hda - Add auto-mute support to PB desktop Using the new chained_before flag, we can correct the headphone jack detection capability easily over the existing ALC880 6stack model (which disables the jack detection intentionally for compatibility reason). Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=901846 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-23 18:21:37 +01:00
ALC880_FIXUP_6ST_AUTOMUTE,
ALSA: hda/realtek - Move ALC880 model=medion-rim to auto-parser Translate ALC880 medion-rim static configs to the auto-parser with the additional GPIO2 verb and COEF setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-15 14:26:54 +01:00
};
ALSA: hda/realtek - Rewrite ALC880 model=futjisu with auto-parser Now adding the support for the volume-knob widget, we can move the static quirk for ALC880 model=fujitsu to the auto-parser completely. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 16:31:07 +01:00
/* enable the volume-knob widget support on NID 0x21 */
static void alc880_fixup_vol_knob(struct hda_codec *codec,
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
const struct hda_fixup *fix, int action)
ALSA: hda/realtek - Rewrite ALC880 model=futjisu with auto-parser Now adding the support for the volume-knob widget, we can move the static quirk for ALC880 model=fujitsu to the auto-parser completely. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 16:31:07 +01:00
{
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
if (action == HDA_FIXUP_ACT_PROBE)
ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event For less duplication of code between codecs, and to make it easier in the future to improve code for all codecs simultaneously. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-25 11:31:00 +02:00
snd_hda_jack_detect_enable_callback(codec, 0x21, ALC_DCVOL_EVENT, alc_update_knob_master);
ALSA: hda/realtek - Rewrite ALC880 model=futjisu with auto-parser Now adding the support for the volume-knob widget, we can move the static quirk for ALC880 model=fujitsu to the auto-parser completely. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 16:31:07 +01:00
}
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
static const struct hda_fixup alc880_fixups[] = {
ALSA: hda/realtek - Rewrite ALC880 model=asus-w1v with auto-parser ASUS W1V has a sane pin-config table set by BIOS. The only missing piece is the setup of GPIO1. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 17:48:19 +01:00
[ALC880_FIXUP_GPIO1] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda/realtek - Rewrite ALC880 model=asus-w1v with auto-parser ASUS W1V has a sane pin-config table set by BIOS. The only missing piece is the setup of GPIO1. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 17:48:19 +01:00
.v.verbs = alc_gpio1_init_verbs,
},
ALSA: hda/realtek - Move ALC880 model=medion-rim to auto-parser Translate ALC880 medion-rim static configs to the auto-parser with the additional GPIO2 verb and COEF setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-15 14:26:54 +01:00
[ALC880_FIXUP_GPIO2] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda/realtek - Move ALC880 model=medion-rim to auto-parser Translate ALC880 medion-rim static configs to the auto-parser with the additional GPIO2 verb and COEF setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-15 14:26:54 +01:00
.v.verbs = alc_gpio2_init_verbs,
},
[ALC880_FIXUP_MEDION_RIM] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda/realtek - Move ALC880 model=medion-rim to auto-parser Translate ALC880 medion-rim static configs to the auto-parser with the additional GPIO2 verb and COEF setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-15 14:26:54 +01:00
.v.verbs = (const struct hda_verb[]) {
{ 0x20, AC_VERB_SET_COEF_INDEX, 0x07 },
{ 0x20, AC_VERB_SET_PROC_COEF, 0x3060 },
{ }
},
.chained = true,
.chain_id = ALC880_FIXUP_GPIO2,
},
ALSA: hda/realtek - Rewrite ALC880 model=lg with the auto-parser ALC880 model=lg could work fine with the auto-parser due to the recent rewrite, but it still needs the manual adjustment; namely, the BIOS leaves unused pins as some real active jacks. This confuses the parser. Thus we just cover these pins and override the pin-configs as a fix-up. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17 16:18:59 +01:00
[ALC880_FIXUP_LG] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda/realtek - Rewrite ALC880 model=lg with the auto-parser ALC880 model=lg could work fine with the auto-parser due to the recent rewrite, but it still needs the manual adjustment; namely, the BIOS leaves unused pins as some real active jacks. This confuses the parser. Thus we just cover these pins and override the pin-configs as a fix-up. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17 16:18:59 +01:00
/* disable bogus unused pins */
{ 0x16, 0x411111f0 },
{ 0x18, 0x411111f0 },
{ 0x1a, 0x411111f0 },
{ }
}
},
ALSA: hda/realtek - Rewrite ALC880 model=w810 with auto-parser The Medion W810 with ALC880 has a typical BIOS bug, copying the pin-defaults without disabling the unused pins. At least, the pin 0x17 must be disabled. Also, it requires GPIO-2 setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17 16:33:56 +01:00
[ALC880_FIXUP_W810] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda/realtek - Rewrite ALC880 model=w810 with auto-parser The Medion W810 with ALC880 has a typical BIOS bug, copying the pin-defaults without disabling the unused pins. At least, the pin 0x17 must be disabled. Also, it requires GPIO-2 setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17 16:33:56 +01:00
/* disable bogus unused pins */
{ 0x17, 0x411111f0 },
{ }
},
.chained = true,
.chain_id = ALC880_FIXUP_GPIO2,
},
ALSA: hda/realtek - Drop ALC880 model=clevo Clevo machines with ALC880 are all well with proper BIOS setup. It seems still requiring the additional COEF setup for the EAPD. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17 17:49:54 +01:00
[ALC880_FIXUP_EAPD_COEF] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda/realtek - Drop ALC880 model=clevo Clevo machines with ALC880 are all well with proper BIOS setup. It seems still requiring the additional COEF setup for the EAPD. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17 17:49:54 +01:00
.v.verbs = (const struct hda_verb[]) {
/* change to EAPD mode */
{ 0x20, AC_VERB_SET_COEF_INDEX, 0x07 },
{ 0x20, AC_VERB_SET_PROC_COEF, 0x3060 },
{}
},
},
ALSA: hda/realtek - Replace ALC880 model=tcl with auto-parser It needs a few extra setups for EAPD, but others look fairly straightforward. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17 17:54:44 +01:00
[ALC880_FIXUP_TCL_S700] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda/realtek - Replace ALC880 model=tcl with auto-parser It needs a few extra setups for EAPD, but others look fairly straightforward. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17 17:54:44 +01:00
.v.verbs = (const struct hda_verb[]) {
/* change to EAPD mode */
{ 0x20, AC_VERB_SET_COEF_INDEX, 0x07 },
{ 0x20, AC_VERB_SET_PROC_COEF, 0x3070 },
{}
},
.chained = true,
.chain_id = ALC880_FIXUP_GPIO2,
},
ALSA: hda/realtek - Rewrite ALC880 model=futjisu with auto-parser Now adding the support for the volume-knob widget, we can move the static quirk for ALC880 model=fujitsu to the auto-parser completely. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 16:31:07 +01:00
[ALC880_FIXUP_VOL_KNOB] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda/realtek - Rewrite ALC880 model=futjisu with auto-parser Now adding the support for the volume-knob widget, we can move the static quirk for ALC880 model=fujitsu to the auto-parser completely. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 16:31:07 +01:00
.v.func = alc880_fixup_vol_knob,
},
[ALC880_FIXUP_FUJITSU] = {
/* override all pins as BIOS on old Amilo is broken */
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda/realtek - Rewrite ALC880 model=futjisu with auto-parser Now adding the support for the volume-knob widget, we can move the static quirk for ALC880 model=fujitsu to the auto-parser completely. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 16:31:07 +01:00
{ 0x14, 0x0121411f }, /* HP */
{ 0x15, 0x99030120 }, /* speaker */
{ 0x16, 0x99030130 }, /* bass speaker */
{ 0x17, 0x411111f0 }, /* N/A */
{ 0x18, 0x411111f0 }, /* N/A */
{ 0x19, 0x01a19950 }, /* mic-in */
{ 0x1a, 0x411111f0 }, /* N/A */
{ 0x1b, 0x411111f0 }, /* N/A */
{ 0x1c, 0x411111f0 }, /* N/A */
{ 0x1d, 0x411111f0 }, /* N/A */
{ 0x1e, 0x01454140 }, /* SPDIF out */
{ }
},
.chained = true,
.chain_id = ALC880_FIXUP_VOL_KNOB,
},
ALSA: hda/realtek - Rewrite ALC880 model=F1734 with auto-parser Similar as the previous patch for model=fujitsu, we can now move the static quirk for F1734 to the auto-parser. The only difference is the default pin configurations: F1734 has less pins than Amilo's. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 16:36:52 +01:00
[ALC880_FIXUP_F1734] = {
/* almost compatible with FUJITSU, but no bass and SPDIF */
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda/realtek - Rewrite ALC880 model=F1734 with auto-parser Similar as the previous patch for model=fujitsu, we can now move the static quirk for F1734 to the auto-parser. The only difference is the default pin configurations: F1734 has less pins than Amilo's. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 16:36:52 +01:00
{ 0x14, 0x0121411f }, /* HP */
{ 0x15, 0x99030120 }, /* speaker */
{ 0x16, 0x411111f0 }, /* N/A */
{ 0x17, 0x411111f0 }, /* N/A */
{ 0x18, 0x411111f0 }, /* N/A */
{ 0x19, 0x01a19950 }, /* mic-in */
{ 0x1a, 0x411111f0 }, /* N/A */
{ 0x1b, 0x411111f0 }, /* N/A */
{ 0x1c, 0x411111f0 }, /* N/A */
{ 0x1d, 0x411111f0 }, /* N/A */
{ 0x1e, 0x411111f0 }, /* N/A */
{ }
},
.chained = true,
.chain_id = ALC880_FIXUP_VOL_KNOB,
},
ALSA: hda/realtek - Rewrite ALC880 model=uniwill with auto-parser The model=uniwill would work almost as is, but a couple of adjustments are needed to make the mutli-io working correctly. The headphone and speaker pins have to be marked properly in pin configs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 17:20:48 +01:00
[ALC880_FIXUP_UNIWILL] = {
/* need to fix HP and speaker pins to be parsed correctly */
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda/realtek - Rewrite ALC880 model=uniwill with auto-parser The model=uniwill would work almost as is, but a couple of adjustments are needed to make the mutli-io working correctly. The headphone and speaker pins have to be marked properly in pin configs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 17:20:48 +01:00
{ 0x14, 0x0121411f }, /* HP */
{ 0x15, 0x99030120 }, /* speaker */
{ 0x16, 0x99030130 }, /* bass speaker */
{ }
},
},
ALSA: hda/realtek - Rewrite ALC880 model=uniwill-dig with auto-parser ALC880 model=uniwill-dig requires the fix-up of bogus BIOS pin default configurations. Other than that, it's pretty normal. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 17:31:02 +01:00
[ALC880_FIXUP_UNIWILL_DIG] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda/realtek - Rewrite ALC880 model=uniwill-dig with auto-parser ALC880 model=uniwill-dig requires the fix-up of bogus BIOS pin default configurations. Other than that, it's pretty normal. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 17:31:02 +01:00
/* disable bogus unused pins */
{ 0x17, 0x411111f0 },
{ 0x19, 0x411111f0 },
{ 0x1b, 0x411111f0 },
{ 0x1f, 0x411111f0 },
{ }
}
},
ALSA: hda/realtek - Rewrite ALC880 model=z71v with auto-parser ASUS Z71V has a totally broken BIOS setup (at least the info I got), thus we need to override the whole pin-config table to make the auto-parser working correctly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 17:41:51 +01:00
[ALC880_FIXUP_Z71V] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda/realtek - Rewrite ALC880 model=z71v with auto-parser ASUS Z71V has a totally broken BIOS setup (at least the info I got), thus we need to override the whole pin-config table to make the auto-parser working correctly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 17:41:51 +01:00
/* set up the whole pins as BIOS is utterly broken */
{ 0x14, 0x99030120 }, /* speaker */
{ 0x15, 0x0121411f }, /* HP */
{ 0x16, 0x411111f0 }, /* N/A */
{ 0x17, 0x411111f0 }, /* N/A */
{ 0x18, 0x01a19950 }, /* mic-in */
{ 0x19, 0x411111f0 }, /* N/A */
{ 0x1a, 0x01813031 }, /* line-in */
{ 0x1b, 0x411111f0 }, /* N/A */
{ 0x1c, 0x411111f0 }, /* N/A */
{ 0x1d, 0x411111f0 }, /* N/A */
{ 0x1e, 0x0144111e }, /* SPDIF */
{ }
}
},
ALSA: hda/realtek - Drop all ALC880 static quirks Finally the all static quirks for ALC880 are converted to the auto-parser. Since we are never sure whether the BIOS on so many old machines are really correct, the quirk table entries are copied as they are, but just providing the proper pin-config values accordingly. Since alc880_quirks.c is removed, alc882_quirks.c has to be adjusted slightly to be built again. There might be some compile warnings due to the remaining alc882 quirks, but these shall be killed sooner or later, I don't care it much at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 18:20:42 +01:00
[ALC880_FIXUP_3ST_BASE] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda/realtek - Drop all ALC880 static quirks Finally the all static quirks for ALC880 are converted to the auto-parser. Since we are never sure whether the BIOS on so many old machines are really correct, the quirk table entries are copied as they are, but just providing the proper pin-config values accordingly. Since alc880_quirks.c is removed, alc882_quirks.c has to be adjusted slightly to be built again. There might be some compile warnings due to the remaining alc882 quirks, but these shall be killed sooner or later, I don't care it much at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 18:20:42 +01:00
{ 0x14, 0x01014010 }, /* line-out */
{ 0x15, 0x411111f0 }, /* N/A */
{ 0x16, 0x411111f0 }, /* N/A */
{ 0x17, 0x411111f0 }, /* N/A */
{ 0x18, 0x01a19c30 }, /* mic-in */
{ 0x19, 0x0121411f }, /* HP */
{ 0x1a, 0x01813031 }, /* line-in */
{ 0x1b, 0x02a19c40 }, /* front-mic */
{ 0x1c, 0x411111f0 }, /* N/A */
{ 0x1d, 0x411111f0 }, /* N/A */
/* 0x1e is filled in below */
{ 0x1f, 0x411111f0 }, /* N/A */
{ }
}
},
[ALC880_FIXUP_3ST] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda/realtek - Drop all ALC880 static quirks Finally the all static quirks for ALC880 are converted to the auto-parser. Since we are never sure whether the BIOS on so many old machines are really correct, the quirk table entries are copied as they are, but just providing the proper pin-config values accordingly. Since alc880_quirks.c is removed, alc882_quirks.c has to be adjusted slightly to be built again. There might be some compile warnings due to the remaining alc882 quirks, but these shall be killed sooner or later, I don't care it much at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 18:20:42 +01:00
{ 0x1e, 0x411111f0 }, /* N/A */
{ }
},
.chained = true,
.chain_id = ALC880_FIXUP_3ST_BASE,
},
[ALC880_FIXUP_3ST_DIG] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda/realtek - Drop all ALC880 static quirks Finally the all static quirks for ALC880 are converted to the auto-parser. Since we are never sure whether the BIOS on so many old machines are really correct, the quirk table entries are copied as they are, but just providing the proper pin-config values accordingly. Since alc880_quirks.c is removed, alc882_quirks.c has to be adjusted slightly to be built again. There might be some compile warnings due to the remaining alc882 quirks, but these shall be killed sooner or later, I don't care it much at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 18:20:42 +01:00
{ 0x1e, 0x0144111e }, /* SPDIF */
{ }
},
.chained = true,
.chain_id = ALC880_FIXUP_3ST_BASE,
},
[ALC880_FIXUP_5ST_BASE] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda/realtek - Drop all ALC880 static quirks Finally the all static quirks for ALC880 are converted to the auto-parser. Since we are never sure whether the BIOS on so many old machines are really correct, the quirk table entries are copied as they are, but just providing the proper pin-config values accordingly. Since alc880_quirks.c is removed, alc882_quirks.c has to be adjusted slightly to be built again. There might be some compile warnings due to the remaining alc882 quirks, but these shall be killed sooner or later, I don't care it much at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 18:20:42 +01:00
{ 0x14, 0x01014010 }, /* front */
{ 0x15, 0x411111f0 }, /* N/A */
{ 0x16, 0x01011411 }, /* CLFE */
{ 0x17, 0x01016412 }, /* surr */
{ 0x18, 0x01a19c30 }, /* mic-in */
{ 0x19, 0x0121411f }, /* HP */
{ 0x1a, 0x01813031 }, /* line-in */
{ 0x1b, 0x02a19c40 }, /* front-mic */
{ 0x1c, 0x411111f0 }, /* N/A */
{ 0x1d, 0x411111f0 }, /* N/A */
/* 0x1e is filled in below */
{ 0x1f, 0x411111f0 }, /* N/A */
{ }
}
},
[ALC880_FIXUP_5ST] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda/realtek - Drop all ALC880 static quirks Finally the all static quirks for ALC880 are converted to the auto-parser. Since we are never sure whether the BIOS on so many old machines are really correct, the quirk table entries are copied as they are, but just providing the proper pin-config values accordingly. Since alc880_quirks.c is removed, alc882_quirks.c has to be adjusted slightly to be built again. There might be some compile warnings due to the remaining alc882 quirks, but these shall be killed sooner or later, I don't care it much at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 18:20:42 +01:00
{ 0x1e, 0x411111f0 }, /* N/A */
{ }
},
.chained = true,
.chain_id = ALC880_FIXUP_5ST_BASE,
},
[ALC880_FIXUP_5ST_DIG] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda/realtek - Drop all ALC880 static quirks Finally the all static quirks for ALC880 are converted to the auto-parser. Since we are never sure whether the BIOS on so many old machines are really correct, the quirk table entries are copied as they are, but just providing the proper pin-config values accordingly. Since alc880_quirks.c is removed, alc882_quirks.c has to be adjusted slightly to be built again. There might be some compile warnings due to the remaining alc882 quirks, but these shall be killed sooner or later, I don't care it much at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 18:20:42 +01:00
{ 0x1e, 0x0144111e }, /* SPDIF */
{ }
},
.chained = true,
.chain_id = ALC880_FIXUP_5ST_BASE,
},
[ALC880_FIXUP_6ST_BASE] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda/realtek - Drop all ALC880 static quirks Finally the all static quirks for ALC880 are converted to the auto-parser. Since we are never sure whether the BIOS on so many old machines are really correct, the quirk table entries are copied as they are, but just providing the proper pin-config values accordingly. Since alc880_quirks.c is removed, alc882_quirks.c has to be adjusted slightly to be built again. There might be some compile warnings due to the remaining alc882 quirks, but these shall be killed sooner or later, I don't care it much at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 18:20:42 +01:00
{ 0x14, 0x01014010 }, /* front */
{ 0x15, 0x01016412 }, /* surr */
{ 0x16, 0x01011411 }, /* CLFE */
{ 0x17, 0x01012414 }, /* side */
{ 0x18, 0x01a19c30 }, /* mic-in */
{ 0x19, 0x02a19c40 }, /* front-mic */
{ 0x1a, 0x01813031 }, /* line-in */
{ 0x1b, 0x0121411f }, /* HP */
{ 0x1c, 0x411111f0 }, /* N/A */
{ 0x1d, 0x411111f0 }, /* N/A */
/* 0x1e is filled in below */
{ 0x1f, 0x411111f0 }, /* N/A */
{ }
}
},
[ALC880_FIXUP_6ST] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda/realtek - Drop all ALC880 static quirks Finally the all static quirks for ALC880 are converted to the auto-parser. Since we are never sure whether the BIOS on so many old machines are really correct, the quirk table entries are copied as they are, but just providing the proper pin-config values accordingly. Since alc880_quirks.c is removed, alc882_quirks.c has to be adjusted slightly to be built again. There might be some compile warnings due to the remaining alc882 quirks, but these shall be killed sooner or later, I don't care it much at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 18:20:42 +01:00
{ 0x1e, 0x411111f0 }, /* N/A */
{ }
},
.chained = true,
.chain_id = ALC880_FIXUP_6ST_BASE,
},
[ALC880_FIXUP_6ST_DIG] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda/realtek - Drop all ALC880 static quirks Finally the all static quirks for ALC880 are converted to the auto-parser. Since we are never sure whether the BIOS on so many old machines are really correct, the quirk table entries are copied as they are, but just providing the proper pin-config values accordingly. Since alc880_quirks.c is removed, alc882_quirks.c has to be adjusted slightly to be built again. There might be some compile warnings due to the remaining alc882 quirks, but these shall be killed sooner or later, I don't care it much at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 18:20:42 +01:00
{ 0x1e, 0x0144111e }, /* SPDIF */
{ }
},
.chained = true,
.chain_id = ALC880_FIXUP_6ST_BASE,
},
ALSA: hda - Add auto-mute support to PB desktop Using the new chained_before flag, we can correct the headphone jack detection capability easily over the existing ALC880 6stack model (which disables the jack detection intentionally for compatibility reason). Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=901846 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-23 18:21:37 +01:00
[ALC880_FIXUP_6ST_AUTOMUTE] = {
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
{ 0x1b, 0x0121401f }, /* HP with jack detect */
{ }
},
.chained_before = true,
.chain_id = ALC880_FIXUP_6ST_BASE,
},
ALSA: hda/realtek - Move ALC880 model=medion-rim to auto-parser Translate ALC880 medion-rim static configs to the auto-parser with the additional GPIO2 verb and COEF setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-15 14:26:54 +01:00
};
static const struct snd_pci_quirk alc880_fixup_tbl[] = {
ALSA: hda/realtek - Rewrite ALC880 model=w810 with auto-parser The Medion W810 with ALC880 has a typical BIOS bug, copying the pin-defaults without disabling the unused pins. At least, the pin 0x17 must be disabled. Also, it requires GPIO-2 setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17 16:33:56 +01:00
SND_PCI_QUIRK(0x1019, 0x0f69, "Coeus G610P", ALC880_FIXUP_W810),
ALSA: hda/realtek - Rewrite ALC880 model=z71v with auto-parser ASUS Z71V has a totally broken BIOS setup (at least the info I got), thus we need to override the whole pin-config table to make the auto-parser working correctly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 17:41:51 +01:00
SND_PCI_QUIRK(0x1043, 0x1964, "ASUS Z71V", ALC880_FIXUP_Z71V),
ALSA: hda/realtek - Drop model=asus* from ALC880 It turned out that BIOS on most of ASUS mobo's set the pin-config tables reasonably well for the auto-parser. We'd need GPIO setups, but should work as is other than that. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 17:56:57 +01:00
SND_PCI_QUIRK_VENDOR(0x1043, "ASUS", ALC880_FIXUP_GPIO1),
SND_PCI_QUIRK(0x1558, 0x5401, "Clevo GPIO2", ALC880_FIXUP_GPIO2),
ALSA: hda/realtek - Drop ALC880 model=clevo Clevo machines with ALC880 are all well with proper BIOS setup. It seems still requiring the additional COEF setup for the EAPD. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17 17:49:54 +01:00
SND_PCI_QUIRK_VENDOR(0x1558, "Clevo", ALC880_FIXUP_EAPD_COEF),
ALSA: hda/realtek - Rewrite ALC880 model=uniwill-dig with auto-parser ALC880 model=uniwill-dig requires the fix-up of bogus BIOS pin default configurations. Other than that, it's pretty normal. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 17:31:02 +01:00
SND_PCI_QUIRK(0x1584, 0x9050, "Uniwill", ALC880_FIXUP_UNIWILL_DIG),
ALSA: hda/realtek - Rewrite ALC880 model=F1734 with auto-parser Similar as the previous patch for model=fujitsu, we can now move the static quirk for F1734 to the auto-parser. The only difference is the default pin configurations: F1734 has less pins than Amilo's. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 16:36:52 +01:00
SND_PCI_QUIRK(0x1584, 0x9054, "Uniwill", ALC880_FIXUP_F1734),
ALSA: hda/realtek - Rewrite ALC880 model=uniwill with auto-parser The model=uniwill would work almost as is, but a couple of adjustments are needed to make the mutli-io working correctly. The headphone and speaker pins have to be marked properly in pin configs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 17:20:48 +01:00
SND_PCI_QUIRK(0x1584, 0x9070, "Uniwill", ALC880_FIXUP_UNIWILL),
ALSA: hda/realtek - Rewrite ALC880 model=uniwill-p53 with auto-parser Uniwill p53 has a sane BIOS setup but just needs the volume-knob handling like Fujitsu laptops with ALC880. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 17:11:38 +01:00
SND_PCI_QUIRK(0x1584, 0x9077, "Uniwill P53", ALC880_FIXUP_VOL_KNOB),
ALSA: hda/realtek - Rewrite ALC880 model=w810 with auto-parser The Medion W810 with ALC880 has a typical BIOS bug, copying the pin-defaults without disabling the unused pins. At least, the pin 0x17 must be disabled. Also, it requires GPIO-2 setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17 16:33:56 +01:00
SND_PCI_QUIRK(0x161f, 0x203d, "W810", ALC880_FIXUP_W810),
ALSA: hda/realtek - Move ALC880 model=medion-rim to auto-parser Translate ALC880 medion-rim static configs to the auto-parser with the additional GPIO2 verb and COEF setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-15 14:26:54 +01:00
SND_PCI_QUIRK(0x161f, 0x205d, "Medion Rim 2150", ALC880_FIXUP_MEDION_RIM),
ALSA: hda - Add auto-mute support to PB desktop Using the new chained_before flag, we can correct the headphone jack detection capability easily over the existing ALC880 6stack model (which disables the jack detection intentionally for compatibility reason). Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=901846 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-23 18:21:37 +01:00
SND_PCI_QUIRK(0x1631, 0xe011, "PB 13201056", ALC880_FIXUP_6ST_AUTOMUTE),
ALSA: hda/realtek - Rewrite ALC880 model=F1734 with auto-parser Similar as the previous patch for model=fujitsu, we can now move the static quirk for F1734 to the auto-parser. The only difference is the default pin configurations: F1734 has less pins than Amilo's. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 16:36:52 +01:00
SND_PCI_QUIRK(0x1734, 0x107c, "FSC F1734", ALC880_FIXUP_F1734),
ALSA: hda/realtek - Rewrite ALC880 model=futjisu with auto-parser Now adding the support for the volume-knob widget, we can move the static quirk for ALC880 model=fujitsu to the auto-parser completely. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 16:31:07 +01:00
SND_PCI_QUIRK(0x1734, 0x1094, "FSC Amilo M1451G", ALC880_FIXUP_FUJITSU),
ALSA: hda/realtek - Rewrite ALC880 model=F1734 with auto-parser Similar as the previous patch for model=fujitsu, we can now move the static quirk for F1734 to the auto-parser. The only difference is the default pin configurations: F1734 has less pins than Amilo's. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 16:36:52 +01:00
SND_PCI_QUIRK(0x1734, 0x10ac, "FSC AMILO Xi 1526", ALC880_FIXUP_F1734),
ALSA: hda/realtek - Rewrite ALC880 model=futjisu with auto-parser Now adding the support for the volume-knob widget, we can move the static quirk for ALC880 model=fujitsu to the auto-parser completely. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 16:31:07 +01:00
SND_PCI_QUIRK(0x1734, 0x10b0, "FSC Amilo Pi1556", ALC880_FIXUP_FUJITSU),
ALSA: hda/realtek - Rewrite ALC880 model=lg with the auto-parser ALC880 model=lg could work fine with the auto-parser due to the recent rewrite, but it still needs the manual adjustment; namely, the BIOS leaves unused pins as some real active jacks. This confuses the parser. Thus we just cover these pins and override the pin-configs as a fix-up. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17 16:18:59 +01:00
SND_PCI_QUIRK(0x1854, 0x003b, "LG", ALC880_FIXUP_LG),
SND_PCI_QUIRK(0x1854, 0x005f, "LG P1 Express", ALC880_FIXUP_LG),
SND_PCI_QUIRK(0x1854, 0x0068, "LG w1", ALC880_FIXUP_LG),
ALSA: hda/realtek - Replace ALC880 model=tcl with auto-parser It needs a few extra setups for EAPD, but others look fairly straightforward. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17 17:54:44 +01:00
SND_PCI_QUIRK(0x19db, 0x4188, "TCL S700", ALC880_FIXUP_TCL_S700),
ALSA: hda/realtek - Drop all ALC880 static quirks Finally the all static quirks for ALC880 are converted to the auto-parser. Since we are never sure whether the BIOS on so many old machines are really correct, the quirk table entries are copied as they are, but just providing the proper pin-config values accordingly. Since alc880_quirks.c is removed, alc882_quirks.c has to be adjusted slightly to be built again. There might be some compile warnings due to the remaining alc882 quirks, but these shall be killed sooner or later, I don't care it much at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 18:20:42 +01:00
/* Below is the copied entries from alc880_quirks.c.
* It's not quite sure whether BIOS sets the correct pin-config table
* on these machines, thus they are kept to be compatible with
* the old static quirks. Once when it's confirmed to work without
* these overrides, it'd be better to remove.
*/
SND_PCI_QUIRK(0x1019, 0xa880, "ECS", ALC880_FIXUP_5ST_DIG),
SND_PCI_QUIRK(0x1019, 0xa884, "Acer APFV", ALC880_FIXUP_6ST),
SND_PCI_QUIRK(0x1025, 0x0070, "ULI", ALC880_FIXUP_3ST_DIG),
SND_PCI_QUIRK(0x1025, 0x0077, "ULI", ALC880_FIXUP_6ST_DIG),
SND_PCI_QUIRK(0x1025, 0x0078, "ULI", ALC880_FIXUP_6ST_DIG),
SND_PCI_QUIRK(0x1025, 0x0087, "ULI", ALC880_FIXUP_6ST_DIG),
SND_PCI_QUIRK(0x1025, 0xe309, "ULI", ALC880_FIXUP_3ST_DIG),
SND_PCI_QUIRK(0x1025, 0xe310, "ULI", ALC880_FIXUP_3ST),
SND_PCI_QUIRK(0x1039, 0x1234, NULL, ALC880_FIXUP_6ST_DIG),
SND_PCI_QUIRK(0x104d, 0x81a0, "Sony", ALC880_FIXUP_3ST),
SND_PCI_QUIRK(0x104d, 0x81d6, "Sony", ALC880_FIXUP_3ST),
SND_PCI_QUIRK(0x107b, 0x3032, "Gateway", ALC880_FIXUP_5ST),
SND_PCI_QUIRK(0x107b, 0x3033, "Gateway", ALC880_FIXUP_5ST),
SND_PCI_QUIRK(0x107b, 0x4039, "Gateway", ALC880_FIXUP_5ST),
SND_PCI_QUIRK(0x1297, 0xc790, "Shuttle ST20G5", ALC880_FIXUP_6ST_DIG),
SND_PCI_QUIRK(0x1458, 0xa102, "Gigabyte K8", ALC880_FIXUP_6ST_DIG),
SND_PCI_QUIRK(0x1462, 0x1150, "MSI", ALC880_FIXUP_6ST_DIG),
SND_PCI_QUIRK(0x1509, 0x925d, "FIC P4M", ALC880_FIXUP_6ST_DIG),
SND_PCI_QUIRK(0x1565, 0x8202, "Biostar", ALC880_FIXUP_5ST_DIG),
SND_PCI_QUIRK(0x1695, 0x400d, "EPoX", ALC880_FIXUP_5ST_DIG),
SND_PCI_QUIRK(0x1695, 0x4012, "EPox EP-5LDA", ALC880_FIXUP_5ST_DIG),
SND_PCI_QUIRK(0x2668, 0x8086, NULL, ALC880_FIXUP_6ST_DIG), /* broken BIOS */
SND_PCI_QUIRK(0x8086, 0x2668, NULL, ALC880_FIXUP_6ST_DIG),
SND_PCI_QUIRK(0x8086, 0xa100, "Intel mobo", ALC880_FIXUP_5ST_DIG),
SND_PCI_QUIRK(0x8086, 0xd400, "Intel mobo", ALC880_FIXUP_5ST_DIG),
SND_PCI_QUIRK(0x8086, 0xd401, "Intel mobo", ALC880_FIXUP_5ST_DIG),
SND_PCI_QUIRK(0x8086, 0xd402, "Intel mobo", ALC880_FIXUP_3ST_DIG),
SND_PCI_QUIRK(0x8086, 0xe224, "Intel mobo", ALC880_FIXUP_5ST_DIG),
SND_PCI_QUIRK(0x8086, 0xe305, "Intel mobo", ALC880_FIXUP_3ST_DIG),
SND_PCI_QUIRK(0x8086, 0xe308, "Intel mobo", ALC880_FIXUP_3ST_DIG),
SND_PCI_QUIRK(0x8086, 0xe400, "Intel mobo", ALC880_FIXUP_5ST_DIG),
SND_PCI_QUIRK(0x8086, 0xe401, "Intel mobo", ALC880_FIXUP_5ST_DIG),
SND_PCI_QUIRK(0x8086, 0xe402, "Intel mobo", ALC880_FIXUP_5ST_DIG),
/* default Intel */
SND_PCI_QUIRK_VENDOR(0x8086, "Intel mobo", ALC880_FIXUP_3ST),
SND_PCI_QUIRK(0xa0a0, 0x0560, "AOpen i915GMm-HFS", ALC880_FIXUP_5ST_DIG),
SND_PCI_QUIRK(0xe803, 0x1019, NULL, ALC880_FIXUP_6ST_DIG),
{}
};
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
static const struct hda_model_fixup alc880_fixup_models[] = {
ALSA: hda/realtek - Drop all ALC880 static quirks Finally the all static quirks for ALC880 are converted to the auto-parser. Since we are never sure whether the BIOS on so many old machines are really correct, the quirk table entries are copied as they are, but just providing the proper pin-config values accordingly. Since alc880_quirks.c is removed, alc882_quirks.c has to be adjusted slightly to be built again. There might be some compile warnings due to the remaining alc882 quirks, but these shall be killed sooner or later, I don't care it much at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 18:20:42 +01:00
{.id = ALC880_FIXUP_3ST, .name = "3stack"},
{.id = ALC880_FIXUP_3ST_DIG, .name = "3stack-digout"},
{.id = ALC880_FIXUP_5ST, .name = "5stack"},
{.id = ALC880_FIXUP_5ST_DIG, .name = "5stack-digout"},
{.id = ALC880_FIXUP_6ST, .name = "6stack"},
{.id = ALC880_FIXUP_6ST_DIG, .name = "6stack-digout"},
ALSA: hda - Add auto-mute support to PB desktop Using the new chained_before flag, we can correct the headphone jack detection capability easily over the existing ALC880 6stack model (which disables the jack detection intentionally for compatibility reason). Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=901846 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-23 18:21:37 +01:00
{.id = ALC880_FIXUP_6ST_AUTOMUTE, .name = "6stack-automute"},
ALSA: hda/realtek - Move ALC880 model=medion-rim to auto-parser Translate ALC880 medion-rim static configs to the auto-parser with the additional GPIO2 verb and COEF setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-15 14:26:54 +01:00
{}
};
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/*
* OK, here we have finally the patch for ALC880
*/
static int patch_alc880(struct hda_codec *codec)
ALSA: hda - Add support of Quanta FL1 Added the support of Quanta FL1 with ALC269 code chip. Also a bit space clean-ups. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-26 13:13:00 +02:00
{
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
struct alc_spec *spec;
int err;
[ALSA] hda-codec - Add ALC889/ALC267/ALC269 support Added the support of new Realtek codecs: 1. New ALC889 Support 2. New ALC267 Support 3. New ALC269 Support Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-12-13 16:52:54 +01:00
ALSA: hda/realtek - Call a common helper for alc_spec initialization Just a clean up by calling the same helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 18:03:15 +02:00
err = alc_alloc_spec(codec, 0x0b);
if (err < 0)
return err;
ALSA: hda - Add lifebook model for Realtek ALC269 The widget layout of the Fujitsu Lifebook S6420 (which is ICH9M-based and uses an ALC269) is similar but not identical to the Lifebook S6410/E8410 (which are ICH8M-based and use an ALC262). It is named lifebook as fujitsu is in use for Amilo machines. This builds on the Quanta FL1 work and supports all analog inputs & outputs that I am aware of. Microphone autoswitch is implemented. The laptop mic port takes precedence over the dock mic port if both happen to have a jack plugged in. This made sense to me as a design decision (imagine a presentation environment with the dock fully wired in and the presenter quickly wanting to override the mic with a headset). There is mention of a digital audio path on the codec graph, so perhaps the headphone socket is dual-function analog/digital. I will follow up with another patch if I can acquire equipment to test this. Signed-off-by: Tony Vroon <tony@linx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-06 15:08:49 +00:00
ALSA: hda/realtek - Call a common helper for alc_spec initialization Just a clean up by calling the same helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 18:03:15 +02:00
spec = codec->spec;
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
spec->gen.need_dac_fix = 1;
ALSA: hda - Add support of ASUS Eeepc P90* - Support ASUS_P900A = P703 - Support ASUS_P901 Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-18 12:36:43 +02:00
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_pick_fixup(codec, alc880_fixup_models, alc880_fixup_tbl,
ALSA: hda/realtek - Drop all ALC880 static quirks Finally the all static quirks for ALC880 are converted to the auto-parser. Since we are never sure whether the BIOS on so many old machines are really correct, the quirk table entries are copied as they are, but just providing the proper pin-config values accordingly. Since alc880_quirks.c is removed, alc882_quirks.c has to be adjusted slightly to be built again. There might be some compile warnings due to the remaining alc882 quirks, but these shall be killed sooner or later, I don't care it much at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 18:20:42 +01:00
alc880_fixups);
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
ALSA: hda/realtek - Move ALC880 model=medion-rim to auto-parser Translate ALC880 medion-rim static configs to the auto-parser with the additional GPIO2 verb and COEF setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-15 14:26:54 +01:00
ALSA: hda/realtek - Drop all ALC880 static quirks Finally the all static quirks for ALC880 are converted to the auto-parser. Since we are never sure whether the BIOS on so many old machines are really correct, the quirk table entries are copied as they are, but just providing the proper pin-config values accordingly. Since alc880_quirks.c is removed, alc882_quirks.c has to be adjusted slightly to be built again. There might be some compile warnings due to the remaining alc882 quirks, but these shall be killed sooner or later, I don't care it much at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 18:20:42 +01:00
/* automatic parse from the BIOS config */
err = alc880_parse_auto_config(codec);
if (err < 0)
goto error;
ALSA: hda - Add support for Acer ZGA ALC271 (1025:047c) Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-06 10:02:57 +02:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
if (!spec->gen.no_analog) {
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
err = snd_hda_attach_beep_device(codec, 0x1);
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
if (err < 0)
goto error;
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
}
ALSA: hda - Add support of ASUS Eeepc P90* - Support ASUS_P900A = P703 - Support ASUS_P901 Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-18 12:36:43 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
codec->patch_ops = alc_patch_ops;
ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event For less duplication of code between codecs, and to make it easier in the future to improve code for all codecs simultaneously. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-25 11:31:00 +02:00
codec->patch_ops.unsol_event = alc880_unsol_event;
ALSA: hda - Add support of ASUS Eeepc P90* - Support ASUS_P900A = P703 - Support ASUS_P901 Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-18 12:36:43 +02:00
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE);
ALSA: hda/realtek - Apply probe-fixup really after probing Move the call of alc_apply_fixup() with ALC_FIXUP_ACT_PROBE after the whole setups of patch_ops & co, so that the fix-up function may override the default setup. This will be needed for installing the own unsol event handler (e.g. for volume-knob controls). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 15:47:55 +01:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
return 0;
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
error:
alc_free(codec);
return err;
ALSA: hda - Fix setup for ALC269vb amic and dmic models Corrected HP and mic pins for ALC269vb amic and dmic models. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-04-09 11:01:20 +02:00
}
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
ALSA: hda - Add support of Quanta FL1 Added the support of Quanta FL1 with ALC269 code chip. Also a bit space clean-ups. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-26 13:13:00 +02:00
/*
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
* ALC260 support
ALSA: hda - Add support of Quanta FL1 Added the support of Quanta FL1 with ALC269 code chip. Also a bit space clean-ups. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-26 13:13:00 +02:00
*/
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
static int alc260_parse_auto_config(struct hda_codec *codec)
[ALSA] hda-codec - Add ALC889/ALC267/ALC269 support Added the support of new Realtek codecs: 1. New ALC889 Support 2. New ALC267 Support 3. New ALC269 Support Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-12-13 16:52:54 +01:00
{
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
static const hda_nid_t alc260_ignore[] = { 0x17, 0 };
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
static const hda_nid_t alc260_ssids[] = { 0x10, 0x15, 0x0f, 0 };
return alc_parse_auto_config(codec, alc260_ignore, alc260_ssids);
[ALSA] hda-codec - Add ALC889/ALC267/ALC269 support Added the support of new Realtek codecs: 1. New ALC889 Support 2. New ALC267 Support 3. New ALC269 Support Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-12-13 16:52:54 +01:00
}
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/*
* Pin config fixes
*/
enum {
ALSA: hda/realtek - Add the fixup codes for ALC260 model=will The model=will for ALC260 requires the pin 0x0f to be a headphone and some special verbs for the COEF to turn on the amp. Now added these as fixup entries and removed the static model quirk. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 11:51:19 +01:00
ALC260_FIXUP_HP_DC5750,
ALC260_FIXUP_HP_PIN_0F,
ALC260_FIXUP_COEF,
ALSA: hda/realtek - Replace ALC260 model=acer with the auto-parser The ALC260 model=acer needs GPIO1 setup. It could be selected well if the codec SSID is set properly by BIOS, but to make sure, enable it forcibly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 12:02:53 +01:00
ALC260_FIXUP_GPIO1,
ALSA: hda/realtek - Replace ALC260 model=replacer with the auto-parser The support for Replacer 627V in the auto-parser needs the unique unsol event handling: although the machine has a single output pin 0x0f, it's used for both the headphone and the speaker, and the driver needs to toggle the output route via GPIO 1. In addition, it needs a special COEF setup with 0x3050. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 12:35:16 +01:00
ALC260_FIXUP_GPIO1_TOGGLE,
ALC260_FIXUP_REPLACER,
ALSA: hda/realtek - Add the support for HP Presario B1900 HP Presario B1900 needs a similar hack like Replacer, toggling GPIO1 per the jack state, in addition to the COEF setup used for other Acer laptops. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 12:42:30 +01:00
ALC260_FIXUP_HP_B1900,
ALSA: hda/realtek - Fix regression on Quanta/Gericom KN1 Through the transition to the auto-parser, the support for Quanta/Gericom KN1 got broken. There are two problems behind it: - This machine doesn't like the default COEF setup for ALC260 we take now as default - BIOS doesn't set the pins correctly at all; especially the machine uses only the pin 0x0f for both headphone and speaker This patch adds the fixup as a workaround for these issues. Reported-and-tested-by: Uros Vampl <mobile.leecher@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-19 07:33:27 +02:00
ALC260_FIXUP_KN1,
ALSA: hda/realtek - Add a fixup for FSC S7020 laptop Try to recover from the regression: set the HP amp for the speaker and add the hp jack mode enum as default. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:10:40 +01:00
ALC260_FIXUP_FSC_S7020,
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
};
ALSA: hda/realtek - Replace ALC260 model=replacer with the auto-parser The support for Replacer 627V in the auto-parser needs the unique unsol event handling: although the machine has a single output pin 0x0f, it's used for both the headphone and the speaker, and the driver needs to toggle the output route via GPIO 1. In addition, it needs a special COEF setup with 0x3050. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 12:35:16 +01:00
static void alc260_gpio1_automute(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA,
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
spec->gen.hp_jack_present);
ALSA: hda/realtek - Replace ALC260 model=replacer with the auto-parser The support for Replacer 627V in the auto-parser needs the unique unsol event handling: although the machine has a single output pin 0x0f, it's used for both the headphone and the speaker, and the driver needs to toggle the output route via GPIO 1. In addition, it needs a special COEF setup with 0x3050. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 12:35:16 +01:00
}
static void alc260_fixup_gpio1_toggle(struct hda_codec *codec,
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
const struct hda_fixup *fix, int action)
ALSA: hda/realtek - Replace ALC260 model=replacer with the auto-parser The support for Replacer 627V in the auto-parser needs the unique unsol event handling: although the machine has a single output pin 0x0f, it's used for both the headphone and the speaker, and the driver needs to toggle the output route via GPIO 1. In addition, it needs a special COEF setup with 0x3050. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 12:35:16 +01:00
{
struct alc_spec *spec = codec->spec;
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
if (action == HDA_FIXUP_ACT_PROBE) {
ALSA: hda/realtek - Replace ALC260 model=replacer with the auto-parser The support for Replacer 627V in the auto-parser needs the unique unsol event handling: although the machine has a single output pin 0x0f, it's used for both the headphone and the speaker, and the driver needs to toggle the output route via GPIO 1. In addition, it needs a special COEF setup with 0x3050. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 12:35:16 +01:00
/* although the machine has only one output pin, we need to
* toggle GPIO1 according to the jack state
*/
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
spec->gen.automute_hook = alc260_gpio1_automute;
spec->gen.detect_hp = 1;
spec->gen.automute_speaker = 1;
spec->gen.autocfg.hp_pins[0] = 0x0f; /* copy it for automute */
snd_hda_jack_detect_enable_callback(codec, 0x0f, HDA_GEN_HP_EVENT,
snd_hda_gen_hp_automute);
ALSA: hda - Move fixup code into struct hda_codec Since the fixup code is used commonly, it's worth to move it to the common place, struct hda_codec, instead of keeping in hda_gen_spec. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-18 18:12:44 +01:00
snd_hda_add_verbs(codec, alc_gpio1_init_verbs);
ALSA: hda/realtek - Replace ALC260 model=replacer with the auto-parser The support for Replacer 627V in the auto-parser needs the unique unsol event handling: although the machine has a single output pin 0x0f, it's used for both the headphone and the speaker, and the driver needs to toggle the output route via GPIO 1. In addition, it needs a special COEF setup with 0x3050. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 12:35:16 +01:00
}
}
ALSA: hda/realtek - Fix regression on Quanta/Gericom KN1 Through the transition to the auto-parser, the support for Quanta/Gericom KN1 got broken. There are two problems behind it: - This machine doesn't like the default COEF setup for ALC260 we take now as default - BIOS doesn't set the pins correctly at all; especially the machine uses only the pin 0x0f for both headphone and speaker This patch adds the fixup as a workaround for these issues. Reported-and-tested-by: Uros Vampl <mobile.leecher@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-19 07:33:27 +02:00
static void alc260_fixup_kn1(struct hda_codec *codec,
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
const struct hda_fixup *fix, int action)
ALSA: hda/realtek - Fix regression on Quanta/Gericom KN1 Through the transition to the auto-parser, the support for Quanta/Gericom KN1 got broken. There are two problems behind it: - This machine doesn't like the default COEF setup for ALC260 we take now as default - BIOS doesn't set the pins correctly at all; especially the machine uses only the pin 0x0f for both headphone and speaker This patch adds the fixup as a workaround for these issues. Reported-and-tested-by: Uros Vampl <mobile.leecher@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-19 07:33:27 +02:00
{
struct alc_spec *spec = codec->spec;
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
static const struct hda_pintbl pincfgs[] = {
ALSA: hda/realtek - Fix regression on Quanta/Gericom KN1 Through the transition to the auto-parser, the support for Quanta/Gericom KN1 got broken. There are two problems behind it: - This machine doesn't like the default COEF setup for ALC260 we take now as default - BIOS doesn't set the pins correctly at all; especially the machine uses only the pin 0x0f for both headphone and speaker This patch adds the fixup as a workaround for these issues. Reported-and-tested-by: Uros Vampl <mobile.leecher@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-19 07:33:27 +02:00
{ 0x0f, 0x02214000 }, /* HP/speaker */
{ 0x12, 0x90a60160 }, /* int mic */
{ 0x13, 0x02a19000 }, /* ext mic */
{ 0x18, 0x01446000 }, /* SPDIF out */
/* disable bogus I/O pins */
{ 0x10, 0x411111f0 },
{ 0x11, 0x411111f0 },
{ 0x14, 0x411111f0 },
{ 0x15, 0x411111f0 },
{ 0x16, 0x411111f0 },
{ 0x17, 0x411111f0 },
{ 0x19, 0x411111f0 },
{ }
};
switch (action) {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
case HDA_FIXUP_ACT_PRE_PROBE:
snd_hda_apply_pincfgs(codec, pincfgs);
ALSA: hda/realtek - Fix regression on Quanta/Gericom KN1 Through the transition to the auto-parser, the support for Quanta/Gericom KN1 got broken. There are two problems behind it: - This machine doesn't like the default COEF setup for ALC260 we take now as default - BIOS doesn't set the pins correctly at all; especially the machine uses only the pin 0x0f for both headphone and speaker This patch adds the fixup as a workaround for these issues. Reported-and-tested-by: Uros Vampl <mobile.leecher@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-19 07:33:27 +02:00
break;
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
case HDA_FIXUP_ACT_PROBE:
ALSA: hda/realtek - Fix regression on Quanta/Gericom KN1 Through the transition to the auto-parser, the support for Quanta/Gericom KN1 got broken. There are two problems behind it: - This machine doesn't like the default COEF setup for ALC260 we take now as default - BIOS doesn't set the pins correctly at all; especially the machine uses only the pin 0x0f for both headphone and speaker This patch adds the fixup as a workaround for these issues. Reported-and-tested-by: Uros Vampl <mobile.leecher@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-19 07:33:27 +02:00
spec->init_amp = ALC_INIT_NONE;
break;
}
}
ALSA: hda/realtek - Add a fixup for FSC S7020 laptop Try to recover from the regression: set the HP amp for the speaker and add the hp jack mode enum as default. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:10:40 +01:00
static void alc260_fixup_fsc_s7020(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
struct alc_spec *spec = codec->spec;
ALSA: hda - Fix the silent speaker output on Fujitsu S7020 laptop In the recent update, Fujitsu S7020 laptop with ALC260 codec lost the speaker output, no matter how the amps and the pins are set. After a long debugging session, we found out that the default codec init code is harmful for this machine, and we have to reset it to ALC_INIT_NONE. Reported-and-tested-by: Jonathan Woithe <jwoithe@just42.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-18 17:04:20 +01:00
switch (action) {
case HDA_FIXUP_ACT_PRE_PROBE:
ALSA: hda/realtek - Add a fixup for FSC S7020 laptop Try to recover from the regression: set the HP amp for the speaker and add the hp jack mode enum as default. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:10:40 +01:00
spec->gen.add_out_jack_modes = 1;
ALSA: hda - Fix the silent speaker output on Fujitsu S7020 laptop In the recent update, Fujitsu S7020 laptop with ALC260 codec lost the speaker output, no matter how the amps and the pins are set. After a long debugging session, we found out that the default codec init code is harmful for this machine, and we have to reset it to ALC_INIT_NONE. Reported-and-tested-by: Jonathan Woithe <jwoithe@just42.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-18 17:04:20 +01:00
break;
case HDA_FIXUP_ACT_PROBE:
spec->init_amp = ALC_INIT_NONE;
break;
}
ALSA: hda/realtek - Add a fixup for FSC S7020 laptop Try to recover from the regression: set the HP amp for the speaker and add the hp jack mode enum as default. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:10:40 +01:00
}
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
static const struct hda_fixup alc260_fixups[] = {
ALSA: hda/realtek - Add the fixup codes for ALC260 model=will The model=will for ALC260 requires the pin 0x0f to be a headphone and some special verbs for the COEF to turn on the amp. Now added these as fixup entries and removed the static model quirk. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 11:51:19 +01:00
[ALC260_FIXUP_HP_DC5750] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{ 0x11, 0x90130110 }, /* speaker */
{ }
}
},
ALSA: hda/realtek - Add the fixup codes for ALC260 model=will The model=will for ALC260 requires the pin 0x0f to be a headphone and some special verbs for the COEF to turn on the amp. Now added these as fixup entries and removed the static model quirk. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 11:51:19 +01:00
[ALC260_FIXUP_HP_PIN_0F] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda/realtek - Add the fixup codes for ALC260 model=will The model=will for ALC260 requires the pin 0x0f to be a headphone and some special verbs for the COEF to turn on the amp. Now added these as fixup entries and removed the static model quirk. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 11:51:19 +01:00
{ 0x0f, 0x01214000 }, /* HP */
{ }
}
},
[ALC260_FIXUP_COEF] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda/realtek - Add the fixup codes for ALC260 model=will The model=will for ALC260 requires the pin 0x0f to be a headphone and some special verbs for the COEF to turn on the amp. Now added these as fixup entries and removed the static model quirk. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 11:51:19 +01:00
.v.verbs = (const struct hda_verb[]) {
{ 0x20, AC_VERB_SET_COEF_INDEX, 0x07 },
{ 0x20, AC_VERB_SET_PROC_COEF, 0x3040 },
{ }
},
.chained = true,
.chain_id = ALC260_FIXUP_HP_PIN_0F,
},
ALSA: hda/realtek - Replace ALC260 model=acer with the auto-parser The ALC260 model=acer needs GPIO1 setup. It could be selected well if the codec SSID is set properly by BIOS, but to make sure, enable it forcibly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 12:02:53 +01:00
[ALC260_FIXUP_GPIO1] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda/realtek - Replace ALC260 model=acer with the auto-parser The ALC260 model=acer needs GPIO1 setup. It could be selected well if the codec SSID is set properly by BIOS, but to make sure, enable it forcibly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 12:02:53 +01:00
.v.verbs = alc_gpio1_init_verbs,
},
ALSA: hda/realtek - Replace ALC260 model=replacer with the auto-parser The support for Replacer 627V in the auto-parser needs the unique unsol event handling: although the machine has a single output pin 0x0f, it's used for both the headphone and the speaker, and the driver needs to toggle the output route via GPIO 1. In addition, it needs a special COEF setup with 0x3050. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 12:35:16 +01:00
[ALC260_FIXUP_GPIO1_TOGGLE] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda/realtek - Replace ALC260 model=replacer with the auto-parser The support for Replacer 627V in the auto-parser needs the unique unsol event handling: although the machine has a single output pin 0x0f, it's used for both the headphone and the speaker, and the driver needs to toggle the output route via GPIO 1. In addition, it needs a special COEF setup with 0x3050. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 12:35:16 +01:00
.v.func = alc260_fixup_gpio1_toggle,
.chained = true,
.chain_id = ALC260_FIXUP_HP_PIN_0F,
},
[ALC260_FIXUP_REPLACER] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda/realtek - Replace ALC260 model=replacer with the auto-parser The support for Replacer 627V in the auto-parser needs the unique unsol event handling: although the machine has a single output pin 0x0f, it's used for both the headphone and the speaker, and the driver needs to toggle the output route via GPIO 1. In addition, it needs a special COEF setup with 0x3050. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 12:35:16 +01:00
.v.verbs = (const struct hda_verb[]) {
{ 0x20, AC_VERB_SET_COEF_INDEX, 0x07 },
{ 0x20, AC_VERB_SET_PROC_COEF, 0x3050 },
{ }
},
.chained = true,
.chain_id = ALC260_FIXUP_GPIO1_TOGGLE,
},
ALSA: hda/realtek - Add the support for HP Presario B1900 HP Presario B1900 needs a similar hack like Replacer, toggling GPIO1 per the jack state, in addition to the COEF setup used for other Acer laptops. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 12:42:30 +01:00
[ALC260_FIXUP_HP_B1900] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda/realtek - Add the support for HP Presario B1900 HP Presario B1900 needs a similar hack like Replacer, toggling GPIO1 per the jack state, in addition to the COEF setup used for other Acer laptops. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 12:42:30 +01:00
.v.func = alc260_fixup_gpio1_toggle,
.chained = true,
.chain_id = ALC260_FIXUP_COEF,
ALSA: hda/realtek - Fix regression on Quanta/Gericom KN1 Through the transition to the auto-parser, the support for Quanta/Gericom KN1 got broken. There are two problems behind it: - This machine doesn't like the default COEF setup for ALC260 we take now as default - BIOS doesn't set the pins correctly at all; especially the machine uses only the pin 0x0f for both headphone and speaker This patch adds the fixup as a workaround for these issues. Reported-and-tested-by: Uros Vampl <mobile.leecher@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-19 07:33:27 +02:00
},
[ALC260_FIXUP_KN1] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda/realtek - Fix regression on Quanta/Gericom KN1 Through the transition to the auto-parser, the support for Quanta/Gericom KN1 got broken. There are two problems behind it: - This machine doesn't like the default COEF setup for ALC260 we take now as default - BIOS doesn't set the pins correctly at all; especially the machine uses only the pin 0x0f for both headphone and speaker This patch adds the fixup as a workaround for these issues. Reported-and-tested-by: Uros Vampl <mobile.leecher@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-19 07:33:27 +02:00
.v.func = alc260_fixup_kn1,
},
ALSA: hda/realtek - Add a fixup for FSC S7020 laptop Try to recover from the regression: set the HP amp for the speaker and add the hp jack mode enum as default. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:10:40 +01:00
[ALC260_FIXUP_FSC_S7020] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc260_fixup_fsc_s7020,
},
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
};
static const struct snd_pci_quirk alc260_fixup_tbl[] = {
ALSA: hda/realtek - Replace ALC260 model=acer with the auto-parser The ALC260 model=acer needs GPIO1 setup. It could be selected well if the codec SSID is set properly by BIOS, but to make sure, enable it forcibly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 12:02:53 +01:00
SND_PCI_QUIRK(0x1025, 0x007b, "Acer C20x", ALC260_FIXUP_GPIO1),
ALSA: hda/realtek - Add the fixup codes for ALC260 model=will The model=will for ALC260 requires the pin 0x0f to be a headphone and some special verbs for the COEF to turn on the amp. Now added these as fixup entries and removed the static model quirk. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 11:51:19 +01:00
SND_PCI_QUIRK(0x1025, 0x007f, "Acer Aspire 9500", ALC260_FIXUP_COEF),
ALSA: hda/realtek - Replace ALC260 model=acer with the auto-parser The ALC260 model=acer needs GPIO1 setup. It could be selected well if the codec SSID is set properly by BIOS, but to make sure, enable it forcibly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 12:02:53 +01:00
SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_FIXUP_GPIO1),
ALSA: hda/realtek - Add the fixup codes for ALC260 model=will The model=will for ALC260 requires the pin 0x0f to be a headphone and some special verbs for the COEF to turn on the amp. Now added these as fixup entries and removed the static model quirk. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 11:51:19 +01:00
SND_PCI_QUIRK(0x103c, 0x280a, "HP dc5750", ALC260_FIXUP_HP_DC5750),
ALSA: hda/realtek - Add the support for HP Presario B1900 HP Presario B1900 needs a similar hack like Replacer, toggling GPIO1 per the jack state, in addition to the COEF setup used for other Acer laptops. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 12:42:30 +01:00
SND_PCI_QUIRK(0x103c, 0x30ba, "HP Presario B1900", ALC260_FIXUP_HP_B1900),
ALSA: hda/realtek - Add a fixup for FSC S7020 laptop Try to recover from the regression: set the HP amp for the speaker and add the hp jack mode enum as default. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:10:40 +01:00
SND_PCI_QUIRK(0x10cf, 0x1326, "FSC LifeBook S7020", ALC260_FIXUP_FSC_S7020),
ALSA: hda/realtek - Drop model=favorit100 for ALC260 It's working with the auto-parser just with the standard GPIO 1 setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 12:45:03 +01:00
SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FIXUP_GPIO1),
ALSA: hda/realtek - Fix regression on Quanta/Gericom KN1 Through the transition to the auto-parser, the support for Quanta/Gericom KN1 got broken. There are two problems behind it: - This machine doesn't like the default COEF setup for ALC260 we take now as default - BIOS doesn't set the pins correctly at all; especially the machine uses only the pin 0x0f for both headphone and speaker This patch adds the fixup as a workaround for these issues. Reported-and-tested-by: Uros Vampl <mobile.leecher@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-19 07:33:27 +02:00
SND_PCI_QUIRK(0x152d, 0x0729, "Quanta KN1", ALC260_FIXUP_KN1),
ALSA: hda/realtek - Replace ALC260 model=replacer with the auto-parser The support for Replacer 627V in the auto-parser needs the unique unsol event handling: although the machine has a single output pin 0x0f, it's used for both the headphone and the speaker, and the driver needs to toggle the output route via GPIO 1. In addition, it needs a special COEF setup with 0x3050. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 12:35:16 +01:00
SND_PCI_QUIRK(0x161f, 0x2057, "Replacer 672V", ALC260_FIXUP_REPLACER),
ALSA: hda/realtek - Add the fixup codes for ALC260 model=will The model=will for ALC260 requires the pin 0x0f to be a headphone and some special verbs for the COEF to turn on the amp. Now added these as fixup entries and removed the static model quirk. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 11:51:19 +01:00
SND_PCI_QUIRK(0x1631, 0xc017, "PB V7900", ALC260_FIXUP_COEF),
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{}
};
/*
*/
static int patch_alc260(struct hda_codec *codec)
ALSA: hda - Set up COEFs for ALC269 to avoid click noises at power-saving For avoiding the click noises at power-saving, set some COEF values for ALC269* codecs. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-15 10:02:29 +02:00
{
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
struct alc_spec *spec;
ALSA: hda/realtek - Remove leftover static quirks for ALC260 Now we can clean up all static quirks for ALC260. Also many codes in alc_quirks.c can be ripped off since they have been used only by ALC260 static quirks. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 12:59:55 +01:00
int err;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
ALSA: hda/realtek - Call a common helper for alc_spec initialization Just a clean up by calling the same helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 18:03:15 +02:00
err = alc_alloc_spec(codec, 0x07);
if (err < 0)
return err;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
ALSA: hda/realtek - Call a common helper for alc_spec initialization Just a clean up by calling the same helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 18:03:15 +02:00
spec = codec->spec;
ALSA: hda - Add prefer_hp_amp flag to hda_gen_spec Add a new flag to indicate whether HP amp is turned on as default for speaker or line-outs, and enable this for ALC260 codec, as many machines with this codec require the HP amp even for speakers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-15 18:45:53 +01:00
/* as quite a few machines require HP amp for speaker outputs,
* it's easier to enable it unconditionally; even if it's unneeded,
* it's almost harmless.
*/
spec->gen.prefer_hp_amp = 1;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_pick_fixup(codec, NULL, alc260_fixup_tbl, alc260_fixups);
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
ALSA: hda - Set up COEFs for ALC269 to avoid click noises at power-saving For avoiding the click noises at power-saving, set some COEF values for ALC269* codecs. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-15 10:02:29 +02:00
ALSA: hda/realtek - Remove leftover static quirks for ALC260 Now we can clean up all static quirks for ALC260. Also many codes in alc_quirks.c can be ripped off since they have been used only by ALC260 static quirks. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 12:59:55 +01:00
/* automatic parse from the BIOS config */
err = alc260_parse_auto_config(codec);
if (err < 0)
goto error;
ALSA: hda - Set up COEFs for ALC269 to avoid click noises at power-saving For avoiding the click noises at power-saving, set some COEF values for ALC269* codecs. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-15 10:02:29 +02:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
if (!spec->gen.no_analog) {
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
err = snd_hda_attach_beep_device(codec, 0x1);
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
if (err < 0)
goto error;
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
set_beep_amp(spec, 0x07, 0x05, HDA_INPUT);
}
ALSA: hda - Set up COEFs for ALC269 to avoid click noises at power-saving For avoiding the click noises at power-saving, set some COEF values for ALC269* codecs. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-15 10:02:29 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
codec->patch_ops = alc_patch_ops;
spec->shutup = alc_eapd_shutup;
ALSA: hda - Add a fix-up for Acer dmic with ALC271x codec Acer laptops with ALC271x needs a magic initialization for digital-mic to make it working with mono streams (and PulseAudio). Added a fix-up applied to Acer with ALC271x generically. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-15 10:11:12 +02:00
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE);
ALSA: hda/realtek - Apply probe-fixup really after probing Move the call of alc_apply_fixup() with ALC_FIXUP_ACT_PROBE after the whole setups of patch_ops & co, so that the fix-up function may override the default setup. This will be needed for installing the own unsol event handler (e.g. for volume-knob controls). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 15:47:55 +01:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
return 0;
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
error:
alc_free(codec);
return err;
ALSA: hda - Add a fix-up for Acer dmic with ALC271x codec Acer laptops with ALC271x needs a magic initialization for digital-mic to make it working with mono streams (and PulseAudio). Added a fix-up applied to Acer with ALC271x generically. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-15 10:11:12 +02:00
}
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/*
* ALC882/883/885/888/889 support
*
* ALC882 is almost identical with ALC880 but has cleaner and more flexible
* configuration. Each pin widget can choose any input DACs and a mixer.
* Each ADC is connected from a mixer of all inputs. This makes possible
* 6-channel independent captures.
*
* In addition, an independent DAC for the multi-playback (not used in this
* driver yet).
*/
/*
* Pin config fixes
*/
ALSA: hda - Add fix-up for Sony VAIO with ALC269 Sony VAIO models with ALC269 need to initialize the pin 0x19 to VREF ground or Hi-Z to make the headphone working. Other than that, model=auto works fine, so let's use model=auto with a specific fix-up table. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-04-12 08:59:25 +02:00
enum {
ALSA: hda/realtek - Rewrite ALC882 model=vaio-tt with auto-parser Providing a pincfg fix for VAIO-TT with ALC889 codec to work with the auto-parser, and drop the static configuration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 17:59:13 +01:00
ALC882_FIXUP_ABIT_AW9D_MAX,
ALC882_FIXUP_LENOVO_Y530,
ALC882_FIXUP_PB_M5210,
ALC882_FIXUP_ACER_ASPIRE_7736,
ALC882_FIXUP_ASUS_W90V,
ALSA: hda - add quirk to detect CD input on Gigabyte EP45-DS3 My CD input got lost in commit 68ef0561efe494143516df38c03a16b837b8e79c. Raymond helped me to add the necessary pin fixup to make it appear again. In fact, this is basically his patch. It fixes alsa bug #5541. Signed-off-by: Marton Balint <cus@passwd.hu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-05 21:33:23 +01:00
ALC889_FIXUP_CD,
ALSA: hda/realtek - Rewrite ALC882 model=vaio-tt with auto-parser Providing a pincfg fix for VAIO-TT with ALC889 codec to work with the auto-parser, and drop the static configuration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 17:59:13 +01:00
ALC889_FIXUP_VAIO_TT,
ALSA: hda/realtek - Move ALC888 ASUS EEE1601 config to auto-parser The ASUS EEE1601 works almost fine with the auto-parser but the static configuration has a certain specific COEF verb. Add this to the fix-up list so that we can drop the whole EEE1601 static config from alc882_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 12:42:48 +01:00
ALC888_FIXUP_EEE1601,
ALSA: hda/realtek - Drop ALC882 asus-a7j and asus-a7m models These models work fine with the auto-parser with the additional COEF setup. The iMac 7,1 (106b:3200) also uses the same quirk, so remove it too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 12:55:18 +01:00
ALC882_FIXUP_EAPD,
ALSA: hda/realtek - Replace ALC882 arima, medion and laptop-eapd quirks Move these quitks to the auto-parser. They just need some EAPD setups in addition. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 15:22:01 +01:00
ALC883_FIXUP_EAPD,
ALSA: hda/realtek - Move ALC882 model=acer-aspire to auto-parser The ALC882 model=acer-aspire requires the additional COEF setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 17:39:15 +01:00
ALC883_FIXUP_ACER_EAPD,
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
ALC882_FIXUP_GPIO1,
ALC882_FIXUP_GPIO2,
ALSA: hda/realtek - Remove ALC882 targa-* models All ALC882 targa-* models can be replaced with the auto-parser just with the additional GPIO3 setup. And it's generically applied to all MSI boards unless other quirks are present. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 18:03:07 +01:00
ALC882_FIXUP_GPIO3,
ALSA: hda/realtek - Drop ALC882 desktop model quirks Now we're touching the desktop static configs for ALC88x codecs. These are mostly OK with the auto-parser, but some models need careful handling; ALC889 intel mobo requires the COEF setup, and W2JC needs GPIO1 and COEF. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 18:24:44 +01:00
ALC889_FIXUP_COEF,
ALC882_FIXUP_ASUS_W2JC,
ALSA: hda/realtek - Rewrite ALC882 acer-aspire-* models with the auto-parser Now we can move the big acer-aspire-* static quirks to the auto-paresr with some additional pin-configs and verbs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-10 16:01:47 +01:00
ALC882_FIXUP_ACER_ASPIRE_4930G,
ALC882_FIXUP_ACER_ASPIRE_8930G,
ALC882_FIXUP_ASPIRE_8930G_VERBS,
ALSA: hda/realtek - Move ALC885 macpro and imac24 models to auto-parser The ALC882 macpro and imac24 static configs can be transferred to the auto-parser with the additional GPIO setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-14 17:42:11 +01:00
ALC885_FIXUP_MACPRO_GPIO,
ALSA: hda - Fix silent speaker output on Acer Aspire 6935 Since 3.2 kernel, the driver starts trying to assign the multi-io DACs before the speaker, thus it assigns DAC2/3 for multi-io and DAC4 for the speaker for a standard laptop setup like a HP, a speaker, a mic-in and a line-in. However, on Acer Aspire 6935, it seems that the speaker pin 0x14 must be connected with either DAC1 or 2; otherwise it results in silence by some reason, although the codec itself allows the routing to DAC3/4. As a workaround, the connection list of each pin is reduced to be mapped to either only DAC1/2 or DAC3/4, so that the compatible assignment as in kernel 3.1 is achieved. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42740 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 15:25:07 +01:00
ALC889_FIXUP_DAC_ROUTE,
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
ALC889_FIXUP_MBP_VREF,
ALC889_FIXUP_IMAC91_VREF,
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
ALC882_FIXUP_INV_DMIC,
ALSA: hda - Workaround for silent output on VAIO Z with ALC889 On recent kernels, Realtek codec parser tries to optimize the routing aggressively and take the headphone output as primary at first. This caused a regression on VAIO Z with ALC889, the silent output from the speaker. The problem seems that the speaker pin must be connected to the first DAC (0x02) on this machine by some reason although the codec itself advertises the flexible routing with any DACs. This patch adds a fix-up for choosing the speaker pin as the primary so that the right DAC is assigned on this device. Reported-and-tested-by: Adam Williamson <awilliam@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-29 10:04:08 +02:00
ALC882_FIXUP_NO_PRIMARY_HP,
ALSA: hda - Add fix-up for Sony VAIO with ALC269 Sony VAIO models with ALC269 need to initialize the pin 0x19 to VREF ground or Hi-Z to make the headphone working. Other than that, model=auto works fine, so let's use model=auto with a specific fix-up table. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-04-12 08:59:25 +02:00
};
ALSA: hda/realtek - Drop ALC882 desktop model quirks Now we're touching the desktop static configs for ALC88x codecs. These are mostly OK with the auto-parser, but some models need careful handling; ALC889 intel mobo requires the COEF setup, and W2JC needs GPIO1 and COEF. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 18:24:44 +01:00
static void alc889_fixup_coef(struct hda_codec *codec,
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
const struct hda_fixup *fix, int action)
ALSA: hda/realtek - Drop ALC882 desktop model quirks Now we're touching the desktop static configs for ALC88x codecs. These are mostly OK with the auto-parser, but some models need careful handling; ALC889 intel mobo requires the COEF setup, and W2JC needs GPIO1 and COEF. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 18:24:44 +01:00
{
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
if (action != HDA_FIXUP_ACT_INIT)
ALSA: hda/realtek - Drop ALC882 desktop model quirks Now we're touching the desktop static configs for ALC88x codecs. These are mostly OK with the auto-parser, but some models need careful handling; ALC889 intel mobo requires the COEF setup, and W2JC needs GPIO1 and COEF. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 18:24:44 +01:00
return;
alc889_coef_init(codec);
}
ALSA: hda/realtek - Move ALC885 macpro and imac24 models to auto-parser The ALC882 macpro and imac24 static configs can be transferred to the auto-parser with the additional GPIO setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-14 17:42:11 +01:00
/* toggle speaker-output according to the hp-jack state */
static void alc882_gpio_mute(struct hda_codec *codec, int pin, int muted)
{
unsigned int gpiostate, gpiomask, gpiodir;
gpiostate = snd_hda_codec_read(codec, codec->afg, 0,
AC_VERB_GET_GPIO_DATA, 0);
if (!muted)
gpiostate |= (1 << pin);
else
gpiostate &= ~(1 << pin);
gpiomask = snd_hda_codec_read(codec, codec->afg, 0,
AC_VERB_GET_GPIO_MASK, 0);
gpiomask |= (1 << pin);
gpiodir = snd_hda_codec_read(codec, codec->afg, 0,
AC_VERB_GET_GPIO_DIRECTION, 0);
gpiodir |= (1 << pin);
snd_hda_codec_write(codec, codec->afg, 0,
AC_VERB_SET_GPIO_MASK, gpiomask);
snd_hda_codec_write(codec, codec->afg, 0,
AC_VERB_SET_GPIO_DIRECTION, gpiodir);
msleep(1);
snd_hda_codec_write(codec, codec->afg, 0,
AC_VERB_SET_GPIO_DATA, gpiostate);
}
/* set up GPIO at initialization */
static void alc885_fixup_macpro_gpio(struct hda_codec *codec,
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
const struct hda_fixup *fix, int action)
ALSA: hda/realtek - Move ALC885 macpro and imac24 models to auto-parser The ALC882 macpro and imac24 static configs can be transferred to the auto-parser with the additional GPIO setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-14 17:42:11 +01:00
{
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
if (action != HDA_FIXUP_ACT_INIT)
ALSA: hda/realtek - Move ALC885 macpro and imac24 models to auto-parser The ALC882 macpro and imac24 static configs can be transferred to the auto-parser with the additional GPIO setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-14 17:42:11 +01:00
return;
alc882_gpio_mute(codec, 0, 0);
alc882_gpio_mute(codec, 1, 0);
}
ALSA: hda - Fix silent speaker output on Acer Aspire 6935 Since 3.2 kernel, the driver starts trying to assign the multi-io DACs before the speaker, thus it assigns DAC2/3 for multi-io and DAC4 for the speaker for a standard laptop setup like a HP, a speaker, a mic-in and a line-in. However, on Acer Aspire 6935, it seems that the speaker pin 0x14 must be connected with either DAC1 or 2; otherwise it results in silence by some reason, although the codec itself allows the routing to DAC3/4. As a workaround, the connection list of each pin is reduced to be mapped to either only DAC1/2 or DAC3/4, so that the compatible assignment as in kernel 3.1 is achieved. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42740 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 15:25:07 +01:00
/* Fix the connection of some pins for ALC889:
* At least, Acer Aspire 5935 shows the connections to DAC3/4 don't
* work correctly (bko#42740)
*/
static void alc889_fixup_dac_route(struct hda_codec *codec,
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
const struct hda_fixup *fix, int action)
ALSA: hda - Fix silent speaker output on Acer Aspire 6935 Since 3.2 kernel, the driver starts trying to assign the multi-io DACs before the speaker, thus it assigns DAC2/3 for multi-io and DAC4 for the speaker for a standard laptop setup like a HP, a speaker, a mic-in and a line-in. However, on Acer Aspire 6935, it seems that the speaker pin 0x14 must be connected with either DAC1 or 2; otherwise it results in silence by some reason, although the codec itself allows the routing to DAC3/4. As a workaround, the connection list of each pin is reduced to be mapped to either only DAC1/2 or DAC3/4, so that the compatible assignment as in kernel 3.1 is achieved. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42740 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 15:25:07 +01:00
{
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
if (action == HDA_FIXUP_ACT_PRE_PROBE) {
ALSA: hda/realtek - Fix surround output regression on Acer Aspire 5935 The previous fix for the speaker on Acer Aspire 59135 introduced another problem for surround outputs. It changed the connections on the line-in/mic pins for limiting the routes, but it left the modified connections. Thus wrong connection indices were written when set to 4ch or 6ch mode. This patch fixes it by restoring the right connections just after parsing the tree but before the initialization. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42740 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17 10:12:38 +01:00
/* fake the connections during parsing the tree */
ALSA: hda - Fix silent speaker output on Acer Aspire 6935 Since 3.2 kernel, the driver starts trying to assign the multi-io DACs before the speaker, thus it assigns DAC2/3 for multi-io and DAC4 for the speaker for a standard laptop setup like a HP, a speaker, a mic-in and a line-in. However, on Acer Aspire 6935, it seems that the speaker pin 0x14 must be connected with either DAC1 or 2; otherwise it results in silence by some reason, although the codec itself allows the routing to DAC3/4. As a workaround, the connection list of each pin is reduced to be mapped to either only DAC1/2 or DAC3/4, so that the compatible assignment as in kernel 3.1 is achieved. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42740 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 15:25:07 +01:00
hda_nid_t conn1[2] = { 0x0c, 0x0d };
hda_nid_t conn2[2] = { 0x0e, 0x0f };
snd_hda_override_conn_list(codec, 0x14, 2, conn1);
snd_hda_override_conn_list(codec, 0x15, 2, conn1);
snd_hda_override_conn_list(codec, 0x18, 2, conn2);
snd_hda_override_conn_list(codec, 0x1a, 2, conn2);
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
} else if (action == HDA_FIXUP_ACT_PROBE) {
ALSA: hda/realtek - Fix surround output regression on Acer Aspire 5935 The previous fix for the speaker on Acer Aspire 59135 introduced another problem for surround outputs. It changed the connections on the line-in/mic pins for limiting the routes, but it left the modified connections. Thus wrong connection indices were written when set to 4ch or 6ch mode. This patch fixes it by restoring the right connections just after parsing the tree but before the initialization. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42740 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17 10:12:38 +01:00
/* restore the connections */
hda_nid_t conn[5] = { 0x0c, 0x0d, 0x0e, 0x0f, 0x26 };
snd_hda_override_conn_list(codec, 0x14, 5, conn);
snd_hda_override_conn_list(codec, 0x15, 5, conn);
snd_hda_override_conn_list(codec, 0x18, 5, conn);
snd_hda_override_conn_list(codec, 0x1a, 5, conn);
ALSA: hda - Fix silent speaker output on Acer Aspire 6935 Since 3.2 kernel, the driver starts trying to assign the multi-io DACs before the speaker, thus it assigns DAC2/3 for multi-io and DAC4 for the speaker for a standard laptop setup like a HP, a speaker, a mic-in and a line-in. However, on Acer Aspire 6935, it seems that the speaker pin 0x14 must be connected with either DAC1 or 2; otherwise it results in silence by some reason, although the codec itself allows the routing to DAC3/4. As a workaround, the connection list of each pin is reduced to be mapped to either only DAC1/2 or DAC3/4, so that the compatible assignment as in kernel 3.1 is achieved. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42740 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 15:25:07 +01:00
}
}
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
/* Set VREF on HP pin */
static void alc889_fixup_mbp_vref(struct hda_codec *codec,
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
const struct hda_fixup *fix, int action)
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
{
struct alc_spec *spec = codec->spec;
static hda_nid_t nids[2] = { 0x14, 0x15 };
int i;
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
if (action != HDA_FIXUP_ACT_INIT)
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
return;
for (i = 0; i < ARRAY_SIZE(nids); i++) {
unsigned int val = snd_hda_codec_get_pincfg(codec, nids[i]);
if (get_defcfg_device(val) != AC_JACK_HP_OUT)
continue;
ALSA: hda/realtek - Read the cached pinctl value in fixups ... instead of reading the value from the codec at each time. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 10:12:22 +01:00
val = snd_hda_codec_get_pin_target(codec, nids[i]);
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
val |= AC_PINCTL_VREF_80;
ALSA: hda - Introduce snd_hda_set_pin_ctl*() helper functions For setting the pin-control values more safely to match with the actual pin capability bits, a copule of new helper functions, snd_hda_set_pin_ctl() and snd_hda_set_pin_ctl_cache(), are introduced. These are simple replacement of the codec verb write with AC_VERB_SET_PIN_WIDGET but do more sanity checks and filter out superfluous pin-control bits if they don't fit with the corresponding pin capabilities. Some codecs are screwed up or ignore the command when such a wrong bit is set. These helpers will avoid such secret errors. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-20 12:34:50 +02:00
snd_hda_set_pin_ctl(codec, nids[i], val);
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
spec->gen.keep_vref_in_automute = 1;
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
break;
}
}
/* Set VREF on speaker pins on imac91 */
static void alc889_fixup_imac91_vref(struct hda_codec *codec,
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
const struct hda_fixup *fix, int action)
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
{
struct alc_spec *spec = codec->spec;
static hda_nid_t nids[2] = { 0x18, 0x1a };
int i;
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
if (action != HDA_FIXUP_ACT_INIT)
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
return;
for (i = 0; i < ARRAY_SIZE(nids); i++) {
unsigned int val;
ALSA: hda/realtek - Read the cached pinctl value in fixups ... instead of reading the value from the codec at each time. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 10:12:22 +01:00
val = snd_hda_codec_get_pin_target(codec, nids[i]);
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
val |= AC_PINCTL_VREF_50;
ALSA: hda - Introduce snd_hda_set_pin_ctl*() helper functions For setting the pin-control values more safely to match with the actual pin capability bits, a copule of new helper functions, snd_hda_set_pin_ctl() and snd_hda_set_pin_ctl_cache(), are introduced. These are simple replacement of the codec verb write with AC_VERB_SET_PIN_WIDGET but do more sanity checks and filter out superfluous pin-control bits if they don't fit with the corresponding pin capabilities. Some codecs are screwed up or ignore the command when such a wrong bit is set. These helpers will avoid such secret errors. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-20 12:34:50 +02:00
snd_hda_set_pin_ctl(codec, nids[i], val);
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
}
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
spec->gen.keep_vref_in_automute = 1;
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
}
ALSA: hda - Workaround for silent output on VAIO Z with ALC889 On recent kernels, Realtek codec parser tries to optimize the routing aggressively and take the headphone output as primary at first. This caused a regression on VAIO Z with ALC889, the silent output from the speaker. The problem seems that the speaker pin must be connected to the first DAC (0x02) on this machine by some reason although the codec itself advertises the flexible routing with any DACs. This patch adds a fix-up for choosing the speaker pin as the primary so that the right DAC is assigned on this device. Reported-and-tested-by: Adam Williamson <awilliam@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-29 10:04:08 +02:00
/* Don't take HP output as primary
ALSA: hda - update documentation for no-primary-hp fixup The problem addressed by this fixup is not specific to Vaio Z, affecting some Vaio all-in-one desktop PCs too. Update the code comments accordingly. Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-12 16:49:46 +09:00
* Strangely, the speaker output doesn't work on Vaio Z and some Vaio
* all-in-one desktop PCs (for example VGC-LN51JGB) through DAC 0x05
ALSA: hda - Workaround for silent output on VAIO Z with ALC889 On recent kernels, Realtek codec parser tries to optimize the routing aggressively and take the headphone output as primary at first. This caused a regression on VAIO Z with ALC889, the silent output from the speaker. The problem seems that the speaker pin must be connected to the first DAC (0x02) on this machine by some reason although the codec itself advertises the flexible routing with any DACs. This patch adds a fix-up for choosing the speaker pin as the primary so that the right DAC is assigned on this device. Reported-and-tested-by: Adam Williamson <awilliam@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-29 10:04:08 +02:00
*/
static void alc882_fixup_no_primary_hp(struct hda_codec *codec,
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
const struct hda_fixup *fix, int action)
ALSA: hda - Workaround for silent output on VAIO Z with ALC889 On recent kernels, Realtek codec parser tries to optimize the routing aggressively and take the headphone output as primary at first. This caused a regression on VAIO Z with ALC889, the silent output from the speaker. The problem seems that the speaker pin must be connected to the first DAC (0x02) on this machine by some reason although the codec itself advertises the flexible routing with any DACs. This patch adds a fix-up for choosing the speaker pin as the primary so that the right DAC is assigned on this device. Reported-and-tested-by: Adam Williamson <awilliam@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-29 10:04:08 +02:00
{
struct alc_spec *spec = codec->spec;
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
if (action == HDA_FIXUP_ACT_PRE_PROBE)
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
spec->gen.no_primary_hp = 1;
ALSA: hda - Workaround for silent output on VAIO Z with ALC889 On recent kernels, Realtek codec parser tries to optimize the routing aggressively and take the headphone output as primary at first. This caused a regression on VAIO Z with ALC889, the silent output from the speaker. The problem seems that the speaker pin must be connected to the first DAC (0x02) on this machine by some reason although the codec itself advertises the flexible routing with any DACs. This patch adds a fix-up for choosing the speaker pin as the primary so that the right DAC is assigned on this device. Reported-and-tested-by: Adam Williamson <awilliam@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-29 10:04:08 +02:00
}
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
static const struct hda_fixup alc882_fixups[] = {
ALSA: hda/realtek - Rewrite ALC882 model=vaio-tt with auto-parser Providing a pincfg fix for VAIO-TT with ALC889 codec to work with the auto-parser, and drop the static configuration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 17:59:13 +01:00
[ALC882_FIXUP_ABIT_AW9D_MAX] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{ 0x15, 0x01080104 }, /* side */
{ 0x16, 0x01011012 }, /* rear */
{ 0x17, 0x01016011 }, /* clfe */
ALSA: hda - Add fix-up for Sony VAIO with ALC275 codecs Set GPIO2 for some Sony VAIO with ALC275 to fix speaker output. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-21 09:09:53 +01:00
{ }
ALSA: HDA: Enable internal speaker on Dell M101z BugLink: http://launchpad.net/bugs/640254 In some cases a magic processing coefficient is needed to enable the internal speaker on Dell M101z. According to Realtek, this processing coefficient is only present on ALC269vb. Cc: stable@kernel.org Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-16 10:07:53 +02:00
}
},
ALSA: hda/realtek - Rewrite ALC882 model=vaio-tt with auto-parser Providing a pincfg fix for VAIO-TT with ALC889 codec to work with the auto-parser, and drop the static configuration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 17:59:13 +01:00
[ALC882_FIXUP_LENOVO_Y530] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{ 0x15, 0x99130112 }, /* rear int speakers */
{ 0x16, 0x99130111 }, /* subwoofer */
ALSA: HDA: Enable subwoofer on Asus G73Jw Set default association/sequence right on pin 0x17 in order for the automatic parser to recognize the subwoofer correctly. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-15 09:18:18 +01:00
{ }
}
},
ALSA: hda/realtek - Rewrite ALC882 model=vaio-tt with auto-parser Providing a pincfg fix for VAIO-TT with ALC889 codec to work with the auto-parser, and drop the static configuration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 17:59:13 +01:00
[ALC882_FIXUP_PB_M5210] = {
ALSA: hda - Add a new fixup type to override pinctl values Add a new fixup type, HDA_FIXUP_PINCTLS, for overriding the pinctl values of the given pins. It takes the same array of struct pintbl like HDA_FIXUP_PINS, but each entry contains the pinctl value instead of the pin default config value. This patch also replaces the corresponding codes in patch_realtek.c. Without this change, the direct call of verbs may be overridden again by the later call of pinctl restoration by the driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 10:18:14 +01:00
.type = HDA_FIXUP_PINCTLS,
.v.pins = (const struct hda_pintbl[]) {
{ 0x19, PIN_VREF50 },
ALSA: hda - Fix EAPD on Lenovo NB ALC269 to low Lenovo NB 0x9e54 use the external AMP in an inverted manner. Set EAPD to low will enable the AMP. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-12 08:12:52 +01:00
{}
}
},
ALSA: hda/realtek - Rewrite ALC882 model=vaio-tt with auto-parser Providing a pincfg fix for VAIO-TT with ALC889 codec to work with the auto-parser, and drop the static configuration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 17:59:13 +01:00
[ALC882_FIXUP_ACER_ASPIRE_7736] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda - Move up the fixup helper functions to the library module Move the fixup helper functions in patch_realtek.c to hda_auto_parser.c so that they can be used in other codec drivers like patch_conexant.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 17:17:32 +02:00
.v.func = alc_fixup_sku_ignore,
ALSA: hda - Add a fix-up for Acer dmic with ALC271x codec Acer laptops with ALC271x needs a magic initialization for digital-mic to make it working with mono streams (and PulseAudio). Added a fix-up applied to Acer with ALC271x generically. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-15 10:11:12 +02:00
},
ALSA: hda/realtek - Rewrite ALC882 model=vaio-tt with auto-parser Providing a pincfg fix for VAIO-TT with ALC889 codec to work with the auto-parser, and drop the static configuration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 17:59:13 +01:00
[ALC882_FIXUP_ASUS_W90V] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - Fix pin-config for ASUS W90V The association numbers of surround/CLFE speaker pins aren't correctly mapped by the auto-parser. This patch fixes the CLFE speaker pin to the right assoc value (from 3 to 1). Tested-by: Nika Topolchanskaya <nanodesuu@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-26 23:04:08 +02:00
{ 0x16, 0x99130110 }, /* fix sequence for CLFE */
{ }
}
},
ALSA: hda - add quirk to detect CD input on Gigabyte EP45-DS3 My CD input got lost in commit 68ef0561efe494143516df38c03a16b837b8e79c. Raymond helped me to add the necessary pin fixup to make it appear again. In fact, this is basically his patch. It fixes alsa bug #5541. Signed-off-by: Marton Balint <cus@passwd.hu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-05 21:33:23 +01:00
[ALC889_FIXUP_CD] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - add quirk to detect CD input on Gigabyte EP45-DS3 My CD input got lost in commit 68ef0561efe494143516df38c03a16b837b8e79c. Raymond helped me to add the necessary pin fixup to make it appear again. In fact, this is basically his patch. It fixes alsa bug #5541. Signed-off-by: Marton Balint <cus@passwd.hu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-05 21:33:23 +01:00
{ 0x1c, 0x993301f0 }, /* CD */
{ }
}
},
ALSA: hda/realtek - Rewrite ALC882 model=vaio-tt with auto-parser Providing a pincfg fix for VAIO-TT with ALC889 codec to work with the auto-parser, and drop the static configuration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 17:59:13 +01:00
[ALC889_FIXUP_VAIO_TT] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda/realtek - Rewrite ALC882 model=vaio-tt with auto-parser Providing a pincfg fix for VAIO-TT with ALC889 codec to work with the auto-parser, and drop the static configuration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 17:59:13 +01:00
{ 0x17, 0x90170111 }, /* hidden surround speaker */
{ }
}
},
ALSA: hda/realtek - Move ALC888 ASUS EEE1601 config to auto-parser The ASUS EEE1601 works almost fine with the auto-parser but the static configuration has a certain specific COEF verb. Add this to the fix-up list so that we can drop the whole EEE1601 static config from alc882_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 12:42:48 +01:00
[ALC888_FIXUP_EEE1601] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda/realtek - Move ALC888 ASUS EEE1601 config to auto-parser The ASUS EEE1601 works almost fine with the auto-parser but the static configuration has a certain specific COEF verb. Add this to the fix-up list so that we can drop the whole EEE1601 static config from alc882_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 12:42:48 +01:00
.v.verbs = (const struct hda_verb[]) {
{ 0x20, AC_VERB_SET_COEF_INDEX, 0x0b },
{ 0x20, AC_VERB_SET_PROC_COEF, 0x0838 },
{ }
}
ALSA: hda/realtek - Drop ALC882 asus-a7j and asus-a7m models These models work fine with the auto-parser with the additional COEF setup. The iMac 7,1 (106b:3200) also uses the same quirk, so remove it too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 12:55:18 +01:00
},
[ALC882_FIXUP_EAPD] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda/realtek - Drop ALC882 asus-a7j and asus-a7m models These models work fine with the auto-parser with the additional COEF setup. The iMac 7,1 (106b:3200) also uses the same quirk, so remove it too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 12:55:18 +01:00
.v.verbs = (const struct hda_verb[]) {
/* change to EAPD mode */
{ 0x20, AC_VERB_SET_COEF_INDEX, 0x07 },
{ 0x20, AC_VERB_SET_PROC_COEF, 0x3060 },
{ }
}
},
ALSA: hda/realtek - Replace ALC882 arima, medion and laptop-eapd quirks Move these quitks to the auto-parser. They just need some EAPD setups in addition. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 15:22:01 +01:00
[ALC883_FIXUP_EAPD] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda/realtek - Replace ALC882 arima, medion and laptop-eapd quirks Move these quitks to the auto-parser. They just need some EAPD setups in addition. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 15:22:01 +01:00
.v.verbs = (const struct hda_verb[]) {
/* change to EAPD mode */
{ 0x20, AC_VERB_SET_COEF_INDEX, 0x07 },
{ 0x20, AC_VERB_SET_PROC_COEF, 0x3070 },
{ }
}
},
ALSA: hda/realtek - Move ALC882 model=acer-aspire to auto-parser The ALC882 model=acer-aspire requires the additional COEF setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 17:39:15 +01:00
[ALC883_FIXUP_ACER_EAPD] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda/realtek - Move ALC882 model=acer-aspire to auto-parser The ALC882 model=acer-aspire requires the additional COEF setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 17:39:15 +01:00
.v.verbs = (const struct hda_verb[]) {
/* eanable EAPD on Acer laptops */
{ 0x20, AC_VERB_SET_COEF_INDEX, 0x07 },
{ 0x20, AC_VERB_SET_PROC_COEF, 0x3050 },
{ }
}
},
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
[ALC882_FIXUP_GPIO1] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
.v.verbs = alc_gpio1_init_verbs,
},
[ALC882_FIXUP_GPIO2] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
.v.verbs = alc_gpio2_init_verbs,
},
ALSA: hda/realtek - Remove ALC882 targa-* models All ALC882 targa-* models can be replaced with the auto-parser just with the additional GPIO3 setup. And it's generically applied to all MSI boards unless other quirks are present. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 18:03:07 +01:00
[ALC882_FIXUP_GPIO3] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda/realtek - Remove ALC882 targa-* models All ALC882 targa-* models can be replaced with the auto-parser just with the additional GPIO3 setup. And it's generically applied to all MSI boards unless other quirks are present. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 18:03:07 +01:00
.v.verbs = alc_gpio3_init_verbs,
},
ALSA: hda/realtek - Drop ALC882 desktop model quirks Now we're touching the desktop static configs for ALC88x codecs. These are mostly OK with the auto-parser, but some models need careful handling; ALC889 intel mobo requires the COEF setup, and W2JC needs GPIO1 and COEF. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 18:24:44 +01:00
[ALC882_FIXUP_ASUS_W2JC] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda/realtek - Drop ALC882 desktop model quirks Now we're touching the desktop static configs for ALC88x codecs. These are mostly OK with the auto-parser, but some models need careful handling; ALC889 intel mobo requires the COEF setup, and W2JC needs GPIO1 and COEF. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 18:24:44 +01:00
.v.verbs = alc_gpio1_init_verbs,
.chained = true,
.chain_id = ALC882_FIXUP_EAPD,
},
[ALC889_FIXUP_COEF] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda/realtek - Drop ALC882 desktop model quirks Now we're touching the desktop static configs for ALC88x codecs. These are mostly OK with the auto-parser, but some models need careful handling; ALC889 intel mobo requires the COEF setup, and W2JC needs GPIO1 and COEF. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 18:24:44 +01:00
.v.func = alc889_fixup_coef,
},
ALSA: hda/realtek - Rewrite ALC882 acer-aspire-* models with the auto-parser Now we can move the big acer-aspire-* static quirks to the auto-paresr with some additional pin-configs and verbs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-10 16:01:47 +01:00
[ALC882_FIXUP_ACER_ASPIRE_4930G] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda/realtek - Rewrite ALC882 acer-aspire-* models with the auto-parser Now we can move the big acer-aspire-* static quirks to the auto-paresr with some additional pin-configs and verbs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-10 16:01:47 +01:00
{ 0x16, 0x99130111 }, /* CLFE speaker */
{ 0x17, 0x99130112 }, /* surround speaker */
{ }
ALSA: hda/realtek - Fix GPIO1 setup for Acer Aspire 4930 & co Add GPIO1 setup explicitly for Acer Aspire 493x & co. This could be set by alc_auto_init_amp(), but it's safer to set it more explicitly in the fixup table. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-11 17:18:12 +02:00
},
.chained = true,
.chain_id = ALC882_FIXUP_GPIO1,
ALSA: hda/realtek - Rewrite ALC882 acer-aspire-* models with the auto-parser Now we can move the big acer-aspire-* static quirks to the auto-paresr with some additional pin-configs and verbs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-10 16:01:47 +01:00
},
[ALC882_FIXUP_ACER_ASPIRE_8930G] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda/realtek - Rewrite ALC882 acer-aspire-* models with the auto-parser Now we can move the big acer-aspire-* static quirks to the auto-paresr with some additional pin-configs and verbs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-10 16:01:47 +01:00
{ 0x16, 0x99130111 }, /* CLFE speaker */
{ 0x1b, 0x99130112 }, /* surround speaker */
{ }
},
.chained = true,
.chain_id = ALC882_FIXUP_ASPIRE_8930G_VERBS,
},
[ALC882_FIXUP_ASPIRE_8930G_VERBS] = {
/* additional init verbs for Acer Aspire 8930G */
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda/realtek - Rewrite ALC882 acer-aspire-* models with the auto-parser Now we can move the big acer-aspire-* static quirks to the auto-paresr with some additional pin-configs and verbs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-10 16:01:47 +01:00
.v.verbs = (const struct hda_verb[]) {
/* Enable all DACs */
/* DAC DISABLE/MUTE 1? */
/* setting bits 1-5 disables DAC nids 0x02-0x06
* apparently. Init=0x38 */
{ 0x20, AC_VERB_SET_COEF_INDEX, 0x03 },
{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
/* DAC DISABLE/MUTE 2? */
/* some bit here disables the other DACs.
* Init=0x4900 */
{ 0x20, AC_VERB_SET_COEF_INDEX, 0x08 },
{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
/* DMIC fix
* This laptop has a stereo digital microphone.
* The mics are only 1cm apart which makes the stereo
* useless. However, either the mic or the ALC889
* makes the signal become a difference/sum signal
* instead of standard stereo, which is annoying.
* So instead we flip this bit which makes the
* codec replicate the sum signal to both channels,
* turning it into a normal mono mic.
*/
/* DMIC_CONTROL? Init value = 0x0001 */
{ 0x20, AC_VERB_SET_COEF_INDEX, 0x0b },
{ 0x20, AC_VERB_SET_PROC_COEF, 0x0003 },
{ 0x20, AC_VERB_SET_COEF_INDEX, 0x07 },
{ 0x20, AC_VERB_SET_PROC_COEF, 0x3050 },
{ }
ALSA: hda/realtek - Fix GPIO1 setup for Acer Aspire 4930 & co Add GPIO1 setup explicitly for Acer Aspire 493x & co. This could be set by alc_auto_init_amp(), but it's safer to set it more explicitly in the fixup table. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-11 17:18:12 +02:00
},
.chained = true,
.chain_id = ALC882_FIXUP_GPIO1,
ALSA: hda/realtek - Rewrite ALC882 acer-aspire-* models with the auto-parser Now we can move the big acer-aspire-* static quirks to the auto-paresr with some additional pin-configs and verbs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-10 16:01:47 +01:00
},
ALSA: hda/realtek - Move ALC885 macpro and imac24 models to auto-parser The ALC882 macpro and imac24 static configs can be transferred to the auto-parser with the additional GPIO setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-14 17:42:11 +01:00
[ALC885_FIXUP_MACPRO_GPIO] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda/realtek - Move ALC885 macpro and imac24 models to auto-parser The ALC882 macpro and imac24 static configs can be transferred to the auto-parser with the additional GPIO setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-14 17:42:11 +01:00
.v.func = alc885_fixup_macpro_gpio,
},
ALSA: hda - Fix silent speaker output on Acer Aspire 6935 Since 3.2 kernel, the driver starts trying to assign the multi-io DACs before the speaker, thus it assigns DAC2/3 for multi-io and DAC4 for the speaker for a standard laptop setup like a HP, a speaker, a mic-in and a line-in. However, on Acer Aspire 6935, it seems that the speaker pin 0x14 must be connected with either DAC1 or 2; otherwise it results in silence by some reason, although the codec itself allows the routing to DAC3/4. As a workaround, the connection list of each pin is reduced to be mapped to either only DAC1/2 or DAC3/4, so that the compatible assignment as in kernel 3.1 is achieved. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42740 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 15:25:07 +01:00
[ALC889_FIXUP_DAC_ROUTE] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda - Fix silent speaker output on Acer Aspire 6935 Since 3.2 kernel, the driver starts trying to assign the multi-io DACs before the speaker, thus it assigns DAC2/3 for multi-io and DAC4 for the speaker for a standard laptop setup like a HP, a speaker, a mic-in and a line-in. However, on Acer Aspire 6935, it seems that the speaker pin 0x14 must be connected with either DAC1 or 2; otherwise it results in silence by some reason, although the codec itself allows the routing to DAC3/4. As a workaround, the connection list of each pin is reduced to be mapped to either only DAC1/2 or DAC3/4, so that the compatible assignment as in kernel 3.1 is achieved. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42740 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 15:25:07 +01:00
.v.func = alc889_fixup_dac_route,
},
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
[ALC889_FIXUP_MBP_VREF] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
.v.func = alc889_fixup_mbp_vref,
.chained = true,
.chain_id = ALC882_FIXUP_GPIO1,
},
[ALC889_FIXUP_IMAC91_VREF] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
.v.func = alc889_fixup_imac91_vref,
.chained = true,
.chain_id = ALC882_FIXUP_GPIO1,
},
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
[ALC882_FIXUP_INV_DMIC] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
.v.func = alc_fixup_inv_dmic_0x12,
},
ALSA: hda - Workaround for silent output on VAIO Z with ALC889 On recent kernels, Realtek codec parser tries to optimize the routing aggressively and take the headphone output as primary at first. This caused a regression on VAIO Z with ALC889, the silent output from the speaker. The problem seems that the speaker pin must be connected to the first DAC (0x02) on this machine by some reason although the codec itself advertises the flexible routing with any DACs. This patch adds a fix-up for choosing the speaker pin as the primary so that the right DAC is assigned on this device. Reported-and-tested-by: Adam Williamson <awilliam@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-29 10:04:08 +02:00
[ALC882_FIXUP_NO_PRIMARY_HP] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda - Workaround for silent output on VAIO Z with ALC889 On recent kernels, Realtek codec parser tries to optimize the routing aggressively and take the headphone output as primary at first. This caused a regression on VAIO Z with ALC889, the silent output from the speaker. The problem seems that the speaker pin must be connected to the first DAC (0x02) on this machine by some reason although the codec itself advertises the flexible routing with any DACs. This patch adds a fix-up for choosing the speaker pin as the primary so that the right DAC is assigned on this device. Reported-and-tested-by: Adam Williamson <awilliam@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-29 10:04:08 +02:00
.v.func = alc882_fixup_no_primary_hp,
},
ALSA: hda - Add fix-up for Sony VAIO with ALC269 Sony VAIO models with ALC269 need to initialize the pin 0x19 to VREF ground or Hi-Z to make the headphone working. Other than that, model=auto works fine, so let's use model=auto with a specific fix-up table. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-04-12 08:59:25 +02:00
};
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
static const struct snd_pci_quirk alc882_fixup_tbl[] = {
ALSA: hda/realtek - Move ALC882 model=acer-aspire to auto-parser The ALC882 model=acer-aspire requires the additional COEF setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 17:39:15 +01:00
SND_PCI_QUIRK(0x1025, 0x006c, "Acer Aspire 9810", ALC883_FIXUP_ACER_EAPD),
SND_PCI_QUIRK(0x1025, 0x0090, "Acer Aspire", ALC883_FIXUP_ACER_EAPD),
SND_PCI_QUIRK(0x1025, 0x010a, "Acer Ferrari 5000", ALC883_FIXUP_ACER_EAPD),
SND_PCI_QUIRK(0x1025, 0x0110, "Acer Aspire", ALC883_FIXUP_ACER_EAPD),
SND_PCI_QUIRK(0x1025, 0x0112, "Acer Aspire 9303", ALC883_FIXUP_ACER_EAPD),
SND_PCI_QUIRK(0x1025, 0x0121, "Acer Aspire 5920G", ALC883_FIXUP_ACER_EAPD),
ALSA: hda/realtek - Rewrite ALC882 acer-aspire-* models with the auto-parser Now we can move the big acer-aspire-* static quirks to the auto-paresr with some additional pin-configs and verbs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-10 16:01:47 +01:00
SND_PCI_QUIRK(0x1025, 0x013e, "Acer Aspire 4930G",
ALC882_FIXUP_ACER_ASPIRE_4930G),
SND_PCI_QUIRK(0x1025, 0x013f, "Acer Aspire 5930G",
ALC882_FIXUP_ACER_ASPIRE_4930G),
SND_PCI_QUIRK(0x1025, 0x0145, "Acer Aspire 8930G",
ALC882_FIXUP_ACER_ASPIRE_8930G),
SND_PCI_QUIRK(0x1025, 0x0146, "Acer Aspire 6935G",
ALC882_FIXUP_ACER_ASPIRE_8930G),
SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G",
ALC882_FIXUP_ACER_ASPIRE_4930G),
SND_PCI_QUIRK(0x1025, 0x0166, "Acer Aspire 6530G",
ALC882_FIXUP_ACER_ASPIRE_4930G),
SND_PCI_QUIRK(0x1025, 0x0142, "Acer Aspire 7730G",
ALC882_FIXUP_ACER_ASPIRE_4930G),
ALSA: hda/realtek - Rewrite ALC882 model=vaio-tt with auto-parser Providing a pincfg fix for VAIO-TT with ALC889 codec to work with the auto-parser, and drop the static configuration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 17:59:13 +01:00
SND_PCI_QUIRK(0x1025, 0x0155, "Packard-Bell M5120", ALC882_FIXUP_PB_M5210),
ALSA: hda/realtek - Add a fixup for Acer Aspire 5739G Acer Aspire 5739G requires the same fix-up for 4930G to support the surround / bass speakers. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43180 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 10:07:33 +02:00
SND_PCI_QUIRK(0x1025, 0x021e, "Acer Aspire 5739G",
ALC882_FIXUP_ACER_ASPIRE_4930G),
ALSA: hda - Fix silent speaker output on Acer Aspire 6935 Since 3.2 kernel, the driver starts trying to assign the multi-io DACs before the speaker, thus it assigns DAC2/3 for multi-io and DAC4 for the speaker for a standard laptop setup like a HP, a speaker, a mic-in and a line-in. However, on Acer Aspire 6935, it seems that the speaker pin 0x14 must be connected with either DAC1 or 2; otherwise it results in silence by some reason, although the codec itself allows the routing to DAC3/4. As a workaround, the connection list of each pin is reduced to be mapped to either only DAC1/2 or DAC3/4, so that the compatible assignment as in kernel 3.1 is achieved. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42740 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 15:25:07 +01:00
SND_PCI_QUIRK(0x1025, 0x0259, "Acer Aspire 5935", ALC889_FIXUP_DAC_ROUTE),
ALSA: hda/realtek - Add a fixup entry for Acer Aspire 8940G It's compatible with 8930G. Using the same fixup gives the proper 5.1 sound back. Reported-and-tested-by: Dany Martineau <dany.luc.martineau@gmail.com> Cc: <stable@kernel.org> [v3.3+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-12 08:00:19 +02:00
SND_PCI_QUIRK(0x1025, 0x026b, "Acer Aspire 8940G", ALC882_FIXUP_ACER_ASPIRE_8930G),
ALSA: hda/realtek - Reorder alc882_fixup_tbl[] No, I'm not Mr. Monk, but can't resist... Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 17:45:55 +01:00
SND_PCI_QUIRK(0x1025, 0x0296, "Acer Aspire 7736z", ALC882_FIXUP_ACER_ASPIRE_7736),
ALSA: hda/realtek - Drop ALC882 asus-a7j and asus-a7m models These models work fine with the auto-parser with the additional COEF setup. The iMac 7,1 (106b:3200) also uses the same quirk, so remove it too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 12:55:18 +01:00
SND_PCI_QUIRK(0x1043, 0x13c2, "Asus A7M", ALC882_FIXUP_EAPD),
ALSA: hda/realtek - Rewrite ALC882 model=vaio-tt with auto-parser Providing a pincfg fix for VAIO-TT with ALC889 codec to work with the auto-parser, and drop the static configuration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 17:59:13 +01:00
SND_PCI_QUIRK(0x1043, 0x1873, "ASUS W90V", ALC882_FIXUP_ASUS_W90V),
ALSA: hda/realtek - Drop ALC882 desktop model quirks Now we're touching the desktop static configs for ALC88x codecs. These are mostly OK with the auto-parser, but some models need careful handling; ALC889 intel mobo requires the COEF setup, and W2JC needs GPIO1 and COEF. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 18:24:44 +01:00
SND_PCI_QUIRK(0x1043, 0x1971, "Asus W2JC", ALC882_FIXUP_ASUS_W2JC),
ALSA: hda/realtek - Move ALC888 ASUS EEE1601 config to auto-parser The ASUS EEE1601 works almost fine with the auto-parser but the static configuration has a certain specific COEF verb. Add this to the fix-up list so that we can drop the whole EEE1601 static config from alc882_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 12:42:48 +01:00
SND_PCI_QUIRK(0x1043, 0x835f, "Asus Eee 1601", ALC888_FIXUP_EEE1601),
ALSA: hda/realtek - Reorder alc882_fixup_tbl[] No, I'm not Mr. Monk, but can't resist... Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 17:45:55 +01:00
SND_PCI_QUIRK(0x104d, 0x9047, "Sony Vaio TT", ALC889_FIXUP_VAIO_TT),
ALSA: hda - Workaround for silent output on VAIO Z with ALC889 On recent kernels, Realtek codec parser tries to optimize the routing aggressively and take the headphone output as primary at first. This caused a regression on VAIO Z with ALC889, the silent output from the speaker. The problem seems that the speaker pin must be connected to the first DAC (0x02) on this machine by some reason although the codec itself advertises the flexible routing with any DACs. This patch adds a fix-up for choosing the speaker pin as the primary so that the right DAC is assigned on this device. Reported-and-tested-by: Adam Williamson <awilliam@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-29 10:04:08 +02:00
SND_PCI_QUIRK(0x104d, 0x905a, "Sony Vaio Z", ALC882_FIXUP_NO_PRIMARY_HP),
ALSA: hda - Workaround for silent output on Sony Vaio VGC-LN51JGB with ALC889 Some Vaio all-in-one desktop PCs (for example VGC-LN51JGB) are affected by the same issue that caused Vaio Z laptops to become silent: the speaker pin must be connected to the first DAC even though the codec itself advertises flexible routing through any of the DACs. Use the no-primary-hp fixup for choosing the speaker pin as the primary so that the right DAC is assigned on this device. Cc: stable@vger.kernel.org Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-12 16:47:44 +09:00
SND_PCI_QUIRK(0x104d, 0x9043, "Sony Vaio VGC-LN51JGB", ALC882_FIXUP_NO_PRIMARY_HP),
ALSA: hda/realtek - Move ALC885 macpro and imac24 models to auto-parser The ALC882 macpro and imac24 static configs can be transferred to the auto-parser with the additional GPIO setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-14 17:42:11 +01:00
/* All Apple entries are in codec SSIDs */
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
SND_PCI_QUIRK(0x106b, 0x00a0, "MacBookPro 3,1", ALC889_FIXUP_MBP_VREF),
SND_PCI_QUIRK(0x106b, 0x00a1, "Macbook", ALC889_FIXUP_MBP_VREF),
SND_PCI_QUIRK(0x106b, 0x00a4, "MacbookPro 4,1", ALC889_FIXUP_MBP_VREF),
ALSA: hda/realtek - Move ALC885 macpro and imac24 models to auto-parser The ALC882 macpro and imac24 static configs can be transferred to the auto-parser with the additional GPIO setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-14 17:42:11 +01:00
SND_PCI_QUIRK(0x106b, 0x0c00, "Mac Pro", ALC885_FIXUP_MACPRO_GPIO),
SND_PCI_QUIRK(0x106b, 0x1000, "iMac 24", ALC885_FIXUP_MACPRO_GPIO),
SND_PCI_QUIRK(0x106b, 0x2800, "AppleTV", ALC885_FIXUP_MACPRO_GPIO),
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
SND_PCI_QUIRK(0x106b, 0x2c00, "MacbookPro rev3", ALC889_FIXUP_MBP_VREF),
SND_PCI_QUIRK(0x106b, 0x3000, "iMac", ALC889_FIXUP_MBP_VREF),
ALSA: hda/realtek - Move ALC885 macpro and imac24 models to auto-parser The ALC882 macpro and imac24 static configs can be transferred to the auto-parser with the additional GPIO setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-14 17:42:11 +01:00
SND_PCI_QUIRK(0x106b, 0x3200, "iMac 7,1 Aluminum", ALC882_FIXUP_EAPD),
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
SND_PCI_QUIRK(0x106b, 0x3400, "MacBookAir 1,1", ALC889_FIXUP_MBP_VREF),
SND_PCI_QUIRK(0x106b, 0x3500, "MacBookAir 2,1", ALC889_FIXUP_MBP_VREF),
SND_PCI_QUIRK(0x106b, 0x3600, "Macbook 3,1", ALC889_FIXUP_MBP_VREF),
SND_PCI_QUIRK(0x106b, 0x3800, "MacbookPro 4,1", ALC889_FIXUP_MBP_VREF),
ALSA: hda/realtek - Move ALC885 macpro and imac24 models to auto-parser The ALC882 macpro and imac24 static configs can be transferred to the auto-parser with the additional GPIO setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-14 17:42:11 +01:00
SND_PCI_QUIRK(0x106b, 0x3e00, "iMac 24 Aluminum", ALC885_FIXUP_MACPRO_GPIO),
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
SND_PCI_QUIRK(0x106b, 0x3f00, "Macbook 5,1", ALC889_FIXUP_IMAC91_VREF),
SND_PCI_QUIRK(0x106b, 0x4000, "MacbookPro 5,1", ALC889_FIXUP_IMAC91_VREF),
SND_PCI_QUIRK(0x106b, 0x4100, "Macmini 3,1", ALC889_FIXUP_IMAC91_VREF),
ALSA: hda/realtek - Add quirk for Mac Pro 5,1 machines A user reported that setting model=imac24 used to allow sound to work on their Mac Pro 5,1 machine. Commit 5671087ffa "Move ALC885 macpro and imac24 models to auto-parser" removed this model option. All Mac machines are now explicitly handled with a quirk and the auto-parser. This adds a quirk for the device found on the Mac Pro 5,1 machines. This (partially) fixes https://bugzilla.redhat.com/show_bug.cgi?id=808559 [sorted the new entry in the ID number order by tiwai] Reported-by: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-12 13:55:36 -04:00
SND_PCI_QUIRK(0x106b, 0x4200, "Mac Pro 5,1", ALC885_FIXUP_MACPRO_GPIO),
ALSA: hda - Add a missing quirk entry for iMac 9,1 This is another variant of iMac 9,1 with a different codec SSID. Reported-and-tested-by: Everaldo Canuto <everaldo.canuto@gmail.com> Cc: <stable@vger.kernel.org> [v3.3+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-12 10:07:36 +01:00
SND_PCI_QUIRK(0x106b, 0x4300, "iMac 9,1", ALC889_FIXUP_IMAC91_VREF),
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
SND_PCI_QUIRK(0x106b, 0x4600, "MacbookPro 5,2", ALC889_FIXUP_IMAC91_VREF),
SND_PCI_QUIRK(0x106b, 0x4900, "iMac 9,1 Aluminum", ALC889_FIXUP_IMAC91_VREF),
SND_PCI_QUIRK(0x106b, 0x4a00, "Macbook 5,2", ALC889_FIXUP_IMAC91_VREF),
ALSA: hda/realtek - Move ALC885 macpro and imac24 models to auto-parser The ALC882 macpro and imac24 static configs can be transferred to the auto-parser with the additional GPIO setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-14 17:42:11 +01:00
ALSA: hda/realtek - Replace ALC882 arima, medion and laptop-eapd quirks Move these quitks to the auto-parser. They just need some EAPD setups in addition. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 15:22:01 +01:00
SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC882_FIXUP_EAPD),
ALSA: hda/realtek - Add missing CD-input pin for MSI-7350 mobo Reported-by: Philipp Matthias Hahn <pmhahn@pmhahn.de> Cc: <stable@kernel.org> [v3.3+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 11:13:14 +02:00
SND_PCI_QUIRK(0x1462, 0x7350, "MSI-7350", ALC889_FIXUP_CD),
ALSA: hda/realtek - Remove ALC882 targa-* models All ALC882 targa-* models can be replaced with the auto-parser just with the additional GPIO3 setup. And it's generically applied to all MSI boards unless other quirks are present. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 18:03:07 +01:00
SND_PCI_QUIRK_VENDOR(0x1462, "MSI", ALC882_FIXUP_GPIO3),
ALSA: hda - add quirk to detect CD input on Gigabyte EP45-DS3 My CD input got lost in commit 68ef0561efe494143516df38c03a16b837b8e79c. Raymond helped me to add the necessary pin fixup to make it appear again. In fact, this is basically his patch. It fixes alsa bug #5541. Signed-off-by: Marton Balint <cus@passwd.hu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-05 21:33:23 +01:00
SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte EP45-DS3", ALC889_FIXUP_CD),
ALSA: hda/realtek - Rewrite ALC882 model=vaio-tt with auto-parser Providing a pincfg fix for VAIO-TT with ALC889 codec to work with the auto-parser, and drop the static configuration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 17:59:13 +01:00
SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", ALC882_FIXUP_ABIT_AW9D_MAX),
ALSA: hda/realtek - Replace ALC882 arima, medion and laptop-eapd quirks Move these quitks to the auto-parser. They just need some EAPD setups in addition. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 15:22:01 +01:00
SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC882_FIXUP_EAPD),
SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_FIXUP_EAPD),
ALSA: hda/realtek - Reorder alc882_fixup_tbl[] No, I'm not Mr. Monk, but can't resist... Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 17:45:55 +01:00
SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Y530", ALC882_FIXUP_LENOVO_Y530),
ALSA: hda/realtek - Drop ALC882 desktop model quirks Now we're touching the desktop static configs for ALC88x codecs. These are mostly OK with the auto-parser, but some models need careful handling; ALC889 intel mobo requires the COEF setup, and W2JC needs GPIO1 and COEF. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-09 18:24:44 +01:00
SND_PCI_QUIRK(0x8086, 0x0022, "DX58SO", ALC889_FIXUP_COEF),
ALSA: hda - Add fix-up for Sony VAIO with ALC269 Sony VAIO models with ALC269 need to initialize the pin 0x19 to VREF ground or Hi-Z to make the headphone working. Other than that, model=auto works fine, so let's use model=auto with a specific fix-up table. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-04-12 08:59:25 +02:00
{}
};
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
static const struct hda_model_fixup alc882_fixup_models[] = {
ALSA: hda/realtek - Add a few ALC882 model strings back Since there are still many Acer models that might not be covered by the current fixup table, let's add back a few typical model names so that user can test the fixup without recompiling. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-11 14:03:41 +02:00
{.id = ALC882_FIXUP_ACER_ASPIRE_4930G, .name = "acer-aspire-4930g"},
{.id = ALC882_FIXUP_ACER_ASPIRE_8930G, .name = "acer-aspire-8930g"},
{.id = ALC883_FIXUP_ACER_EAPD, .name = "acer-aspire"},
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
{.id = ALC882_FIXUP_INV_DMIC, .name = "inv-dmic"},
ALSA: hda - Workaround for silent output on VAIO Z with ALC889 On recent kernels, Realtek codec parser tries to optimize the routing aggressively and take the headphone output as primary at first. This caused a regression on VAIO Z with ALC889, the silent output from the speaker. The problem seems that the speaker pin must be connected to the first DAC (0x02) on this machine by some reason although the codec itself advertises the flexible routing with any DACs. This patch adds a fix-up for choosing the speaker pin as the primary so that the right DAC is assigned on this device. Reported-and-tested-by: Adam Williamson <awilliam@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-29 10:04:08 +02:00
{.id = ALC882_FIXUP_NO_PRIMARY_HP, .name = "no-primary-hp"},
ALSA: hda/realtek - Add a few ALC882 model strings back Since there are still many Acer models that might not be covered by the current fixup table, let's add back a few typical model names so that user can test the fixup without recompiling. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-11 14:03:41 +02:00
{}
};
[ALSA] hda-codec - Add ALC889/ALC267/ALC269 support Added the support of new Realtek codecs: 1. New ALC889 Support 2. New ALC267 Support 3. New ALC269 Support Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-12-13 16:52:54 +01:00
/*
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
* BIOS auto configuration
[ALSA] hda-codec - Add ALC889/ALC267/ALC269 support Added the support of new Realtek codecs: 1. New ALC889 Support 2. New ALC267 Support 3. New ALC269 Support Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-12-13 16:52:54 +01:00
*/
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/* almost identical with ALC880 parser... */
static int alc882_parse_auto_config(struct hda_codec *codec)
{
static const hda_nid_t alc882_ignore[] = { 0x1d, 0 };
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
static const hda_nid_t alc882_ssids[] = { 0x15, 0x1b, 0x14, 0 };
return alc_parse_auto_config(codec, alc882_ignore, alc882_ssids);
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
}
ALSA: hda - Fix no sound after Windows boot with ALC269 Change power control register to default. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-18 11:53:16 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/*
*/
static int patch_alc882(struct hda_codec *codec)
[ALSA] hda-codec - Add ALC889/ALC267/ALC269 support Added the support of new Realtek codecs: 1. New ALC889 Support 2. New ALC267 Support 3. New ALC269 Support Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-12-13 16:52:54 +01:00
{
struct alc_spec *spec;
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
int err;
[ALSA] hda-codec - Add ALC889/ALC267/ALC269 support Added the support of new Realtek codecs: 1. New ALC889 Support 2. New ALC267 Support 3. New ALC269 Support Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-12-13 16:52:54 +01:00
ALSA: hda/realtek - Call a common helper for alc_spec initialization Just a clean up by calling the same helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 18:03:15 +02:00
err = alc_alloc_spec(codec, 0x0b);
if (err < 0)
return err;
[ALSA] hda-codec - Add ALC889/ALC267/ALC269 support Added the support of new Realtek codecs: 1. New ALC889 Support 2. New ALC267 Support 3. New ALC269 Support Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-12-13 16:52:54 +01:00
ALSA: hda/realtek - Call a common helper for alc_spec initialization Just a clean up by calling the same helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 18:03:15 +02:00
spec = codec->spec;
ALSA: hda - Reduce static init verbs for Realtek auto-parsers Instead of using fixed init verbs, initialize DACs, ADCs and mixers more dynamically for Realtek auto-parsers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27 10:52:59 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
switch (codec->vendor_id) {
case 0x10ec0882:
case 0x10ec0885:
break;
default:
/* ALC883 and variants */
alc_fix_pll_init(codec, 0x20, 0x0a, 10);
break;
ALSA: hda - Don't apply ALC269-specific initialization to ALC275 ALC275 doesn't require the ALC269 (and its variants) specific init sequences. Add the check of codec id. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-21 09:14:13 +01:00
}
ALSA: hda - Set up COEFs for ALC269 to avoid click noises at power-saving For avoiding the click noises at power-saving, set some COEF values for ALC269* codecs. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-15 10:02:29 +02:00
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_pick_fixup(codec, alc882_fixup_models, alc882_fixup_tbl,
ALSA: hda/realtek - Add a few ALC882 model strings back Since there are still many Acer models that might not be covered by the current fixup table, let's add back a few typical model names so that user can test the fixup without recompiling. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-11 14:03:41 +02:00
alc882_fixups);
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
ALSA: hda - Add fix-up for Sony VAIO with ALC269 Sony VAIO models with ALC269 need to initialize the pin 0x19 to VREF ground or Hi-Z to make the headphone working. Other than that, model=auto works fine, so let's use model=auto with a specific fix-up table. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-04-12 08:59:25 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
alc_auto_parse_customize_define(codec);
ALSA: hda/realtek - Remove the last static quirks for ALC882 Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21 11:11:48 +01:00
/* automatic parse from the BIOS config */
err = alc882_parse_auto_config(codec);
if (err < 0)
goto error;
[ALSA] hda-codec - Add ALC889/ALC267/ALC269 support Added the support of new Realtek codecs: 1. New ALC889 Support 2. New ALC267 Support 3. New ALC269 Support Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-12-13 16:52:54 +01:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
if (!spec->gen.no_analog && has_cdefine_beep(codec)) {
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
err = snd_hda_attach_beep_device(codec, 0x1);
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
if (err < 0)
goto error;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
}
[ALSA] hda-codec - Add ALC889/ALC267/ALC269 support Added the support of new Realtek codecs: 1. New ALC889 Support 2. New ALC267 Support 3. New ALC269 Support Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-12-13 16:52:54 +01:00
codec->patch_ops = alc_patch_ops;
ALSA: hda - Add alc_init_jacks() call to other codecs Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-21 08:49:56 +02:00
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE);
ALSA: hda/realtek - Apply probe-fixup really after probing Move the call of alc_apply_fixup() with ALC_FIXUP_ACT_PROBE after the whole setups of patch_ops & co, so that the fix-up function may override the default setup. This will be needed for installing the own unsol event handler (e.g. for volume-knob controls). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 15:47:55 +01:00
[ALSA] hda-codec - Add ALC889/ALC267/ALC269 support Added the support of new Realtek codecs: 1. New ALC889 Support 2. New ALC267 Support 3. New ALC269 Support Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-12-13 16:52:54 +01:00
return 0;
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
error:
alc_free(codec);
return err;
[ALSA] hda-codec - Add ALC889/ALC267/ALC269 support Added the support of new Realtek codecs: 1. New ALC889 Support 2. New ALC267 Support 3. New ALC269 Support Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-12-13 16:52:54 +01:00
}
[ALSA] hda-codec - Add the support of ALC262,ALC883,ALC885,ALC861 Modules: HDA Codec driver,HDA generic driver This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver More models and improvements for ALC880, ALC260 and ALC882 codecs, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-12-05 19:42:22 +01:00
/*
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
* ALC262 support
[ALSA] hda-codec - Add the support of ALC262,ALC883,ALC885,ALC861 Modules: HDA Codec driver,HDA generic driver This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver More models and improvements for ALC880, ALC260 and ALC882 codecs, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-12-05 19:42:22 +01:00
*/
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
static int alc262_parse_auto_config(struct hda_codec *codec)
[ALSA] hda-codec - Add the support of ALC262,ALC883,ALC885,ALC861 Modules: HDA Codec driver,HDA generic driver This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver More models and improvements for ALC880, ALC260 and ALC882 codecs, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-12-05 19:42:22 +01:00
{
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
static const hda_nid_t alc262_ignore[] = { 0x1d, 0 };
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
static const hda_nid_t alc262_ssids[] = { 0x15, 0x1b, 0x14, 0 };
return alc_parse_auto_config(codec, alc262_ignore, alc262_ssids);
[ALSA] hda-codec - Add the support of ALC262,ALC883,ALC885,ALC861 Modules: HDA Codec driver,HDA generic driver This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver More models and improvements for ALC880, ALC260 and ALC882 codecs, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-12-05 19:42:22 +01:00
}
/*
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
* Pin config fixes
[ALSA] hda-codec - Add the support of ALC262,ALC883,ALC885,ALC861 Modules: HDA Codec driver,HDA generic driver This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver More models and improvements for ALC880, ALC260 and ALC882 codecs, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-12-05 19:42:22 +01:00
*/
ALSA: hda - Add a pin-fix for FSC Amilo Pi1505 FSC Amilo Pi 1505 has a buggy BIOS and doesn't set up the HP and speaker pins properly. Add the pinfix entry for that. Reference: Novell bnc#557403 https://bugzilla.novell.com/show_bug.cgi?id=557403 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-01 12:19:37 +01:00
enum {
ALSA: hda/realtek - Convert alc262 model=tyan to a fixup-list Use the auto-parser for ALC262 model=tyan with a pin-config fix-up and drop the static configuration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 12:23:55 +01:00
ALC262_FIXUP_FSC_H270,
ALSA: hda - Fix speaker pin of FSC Lifebook S7110 laptop Some BIOS version of FSC Lifebook S7110 laptop seems to give a wrong default pin config for NID 0x15, which confuses the parser. Give a fixup to correct the value. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18 15:41:34 +01:00
ALC262_FIXUP_FSC_S7110,
ALSA: hda/realtek - Convert alc262 model=tyan to a fixup-list Use the auto-parser for ALC262 model=tyan with a pin-config fix-up and drop the static configuration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 12:23:55 +01:00
ALC262_FIXUP_HP_Z200,
ALC262_FIXUP_TYAN,
ALSA: hda/realtek - Convert ALC262 lenovo-3000 quirks to fixup-list The static quirks for ALC262 Lenovo 3000 can be covered by the auto- parser with a fixup of the mic-pin to VREF50 and the additional COEF verb. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 14:20:07 +01:00
ALC262_FIXUP_LENOVO_3000,
ALSA: hda/realtek - Convert ALC262 benq and benq-t31 to fixup-lists The conversion from ALC262 model=benq and model=benq-t31 static configs to auto-parser requires the manual COEF setups for corresponding models. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 14:41:01 +01:00
ALC262_FIXUP_BENQ,
ALC262_FIXUP_BENQ_T31,
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
ALC262_FIXUP_INV_DMIC,
ALSA: hda - Add a pin-fix for FSC Amilo Pi1505 FSC Amilo Pi 1505 has a buggy BIOS and doesn't set up the HP and speaker pins properly. Add the pinfix entry for that. Reference: Novell bnc#557403 https://bugzilla.novell.com/show_bug.cgi?id=557403 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-01 12:19:37 +01:00
};
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
static const struct hda_fixup alc262_fixups[] = {
ALSA: hda/realtek - Convert alc262 model=tyan to a fixup-list Use the auto-parser for ALC262 model=tyan with a pin-config fix-up and drop the static configuration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 12:23:55 +01:00
[ALC262_FIXUP_FSC_H270] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{ 0x14, 0x99130110 }, /* speaker */
{ 0x15, 0x0221142f }, /* front HP */
{ 0x1b, 0x0121141f }, /* rear HP */
{ }
}
},
ALSA: hda - Fix speaker pin of FSC Lifebook S7110 laptop Some BIOS version of FSC Lifebook S7110 laptop seems to give a wrong default pin config for NID 0x15, which confuses the parser. Give a fixup to correct the value. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18 15:41:34 +01:00
[ALC262_FIXUP_FSC_S7110] = {
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
{ 0x15, 0x90170110 }, /* speaker */
{ }
},
.chained = true,
.chain_id = ALC262_FIXUP_BENQ,
},
ALSA: hda/realtek - Convert alc262 model=tyan to a fixup-list Use the auto-parser for ALC262 model=tyan with a pin-config fix-up and drop the static configuration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 12:23:55 +01:00
[ALC262_FIXUP_HP_Z200] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{ 0x16, 0x99130120 }, /* internal speaker */
ALSA: hda - embed alc_fixup contents into struct definitions Instead of defining each content as a separate struct, put all into the definition of struct alc_fixup arrays so that reader doesn't go back to see the definition again. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-30 09:39:57 +02:00
{ }
}
ALSA: hda - Add a pin-fix for FSC Amilo Pi1505 FSC Amilo Pi 1505 has a buggy BIOS and doesn't set up the HP and speaker pins properly. Add the pinfix entry for that. Reference: Novell bnc#557403 https://bugzilla.novell.com/show_bug.cgi?id=557403 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-01 12:19:37 +01:00
},
ALSA: hda/realtek - Convert alc262 model=tyan to a fixup-list Use the auto-parser for ALC262 model=tyan with a pin-config fix-up and drop the static configuration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 12:23:55 +01:00
[ALC262_FIXUP_TYAN] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda/realtek - Convert alc262 model=tyan to a fixup-list Use the auto-parser for ALC262 model=tyan with a pin-config fix-up and drop the static configuration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 12:23:55 +01:00
{ 0x14, 0x1993e1f0 }, /* int AUX */
{ }
}
},
ALSA: hda/realtek - Convert ALC262 lenovo-3000 quirks to fixup-list The static quirks for ALC262 Lenovo 3000 can be covered by the auto- parser with a fixup of the mic-pin to VREF50 and the additional COEF verb. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 14:20:07 +01:00
[ALC262_FIXUP_LENOVO_3000] = {
ALSA: hda - Add a new fixup type to override pinctl values Add a new fixup type, HDA_FIXUP_PINCTLS, for overriding the pinctl values of the given pins. It takes the same array of struct pintbl like HDA_FIXUP_PINS, but each entry contains the pinctl value instead of the pin default config value. This patch also replaces the corresponding codes in patch_realtek.c. Without this change, the direct call of verbs may be overridden again by the later call of pinctl restoration by the driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 10:18:14 +01:00
.type = HDA_FIXUP_PINCTLS,
.v.pins = (const struct hda_pintbl[]) {
{ 0x19, PIN_VREF50 },
ALSA: hda/realtek - Convert ALC262 benq and benq-t31 to fixup-lists The conversion from ALC262 model=benq and model=benq-t31 static configs to auto-parser requires the manual COEF setups for corresponding models. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 14:41:01 +01:00
{}
},
.chained = true,
.chain_id = ALC262_FIXUP_BENQ,
},
[ALC262_FIXUP_BENQ] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda/realtek - Convert ALC262 benq and benq-t31 to fixup-lists The conversion from ALC262 model=benq and model=benq-t31 static configs to auto-parser requires the manual COEF setups for corresponding models. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 14:41:01 +01:00
.v.verbs = (const struct hda_verb[]) {
ALSA: hda/realtek - Convert ALC262 lenovo-3000 quirks to fixup-list The static quirks for ALC262 Lenovo 3000 can be covered by the auto- parser with a fixup of the mic-pin to VREF50 and the additional COEF verb. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 14:20:07 +01:00
{ 0x20, AC_VERB_SET_COEF_INDEX, 0x07 },
{ 0x20, AC_VERB_SET_PROC_COEF, 0x3070 },
{}
}
},
ALSA: hda/realtek - Convert ALC262 benq and benq-t31 to fixup-lists The conversion from ALC262 model=benq and model=benq-t31 static configs to auto-parser requires the manual COEF setups for corresponding models. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 14:41:01 +01:00
[ALC262_FIXUP_BENQ_T31] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda/realtek - Convert ALC262 benq and benq-t31 to fixup-lists The conversion from ALC262 model=benq and model=benq-t31 static configs to auto-parser requires the manual COEF setups for corresponding models. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 14:41:01 +01:00
.v.verbs = (const struct hda_verb[]) {
{ 0x20, AC_VERB_SET_COEF_INDEX, 0x07 },
{ 0x20, AC_VERB_SET_PROC_COEF, 0x3050 },
{}
}
},
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
[ALC262_FIXUP_INV_DMIC] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
.v.func = alc_fixup_inv_dmic_0x12,
},
ALSA: hda - Add a pin-fix for FSC Amilo Pi1505 FSC Amilo Pi 1505 has a buggy BIOS and doesn't set up the HP and speaker pins properly. Add the pinfix entry for that. Reference: Novell bnc#557403 https://bugzilla.novell.com/show_bug.cgi?id=557403 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-01 12:19:37 +01:00
};
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
static const struct snd_pci_quirk alc262_fixup_tbl[] = {
ALSA: hda/realtek - Convert alc262 model=tyan to a fixup-list Use the auto-parser for ALC262 model=tyan with a pin-config fix-up and drop the static configuration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 12:23:55 +01:00
SND_PCI_QUIRK(0x103c, 0x170b, "HP Z200", ALC262_FIXUP_HP_Z200),
ALSA: hda - Fix speaker pin of FSC Lifebook S7110 laptop Some BIOS version of FSC Lifebook S7110 laptop seems to give a wrong default pin config for NID 0x15, which confuses the parser. Give a fixup to correct the value. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18 15:41:34 +01:00
SND_PCI_QUIRK(0x10cf, 0x1397, "Fujitsu Lifebook S7110", ALC262_FIXUP_FSC_S7110),
ALSA: hda/realtek - Convert ALC262 model=fujitsu to auto-parser It works well with the auto-parse and the default BIOS setup when an additional COEF setup (for benq) is used. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 14:59:40 +01:00
SND_PCI_QUIRK(0x10cf, 0x142d, "Fujitsu Lifebook E8410", ALC262_FIXUP_BENQ),
ALSA: hda/realtek - Convert alc262 model=tyan to a fixup-list Use the auto-parser for ALC262 model=tyan with a pin-config fix-up and drop the static configuration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 12:23:55 +01:00
SND_PCI_QUIRK(0x10f1, 0x2915, "Tyan Thunder n6650W", ALC262_FIXUP_TYAN),
SND_PCI_QUIRK(0x1734, 0x1147, "FSC Celsius H270", ALC262_FIXUP_FSC_H270),
ALSA: hda/realtek - Convert ALC262 lenovo-3000 quirks to fixup-list The static quirks for ALC262 Lenovo 3000 can be covered by the auto- parser with a fixup of the mic-pin to VREF50 and the additional COEF verb. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 14:20:07 +01:00
SND_PCI_QUIRK(0x17aa, 0x384e, "Lenovo 3000", ALC262_FIXUP_LENOVO_3000),
ALSA: hda/realtek - Convert ALC262 benq and benq-t31 to fixup-lists The conversion from ALC262 model=benq and model=benq-t31 static configs to auto-parser requires the manual COEF setups for corresponding models. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 14:41:01 +01:00
SND_PCI_QUIRK(0x17ff, 0x0560, "Benq ED8", ALC262_FIXUP_BENQ),
SND_PCI_QUIRK(0x17ff, 0x058d, "Benq T31-16", ALC262_FIXUP_BENQ_T31),
ALSA: hda - Add a pin-fix for FSC Amilo Pi1505 FSC Amilo Pi 1505 has a buggy BIOS and doesn't set up the HP and speaker pins properly. Add the pinfix entry for that. Reference: Novell bnc#557403 https://bugzilla.novell.com/show_bug.cgi?id=557403 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-01 12:19:37 +01:00
{}
};
[ALSA] hda-codec - Add the support of ALC262,ALC883,ALC885,ALC861 Modules: HDA Codec driver,HDA generic driver This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver More models and improvements for ALC880, ALC260 and ALC882 codecs, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-12-05 19:42:22 +01:00
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
static const struct hda_model_fixup alc262_fixup_models[] = {
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
{.id = ALC262_FIXUP_INV_DMIC, .name = "inv-dmic"},
{}
};
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/*
*/
static int patch_alc262(struct hda_codec *codec)
[ALSA] hda-codec - Add the support of ALC262,ALC883,ALC885,ALC861 Modules: HDA Codec driver,HDA generic driver This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver More models and improvements for ALC880, ALC260 and ALC882 codecs, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-12-05 19:42:22 +01:00
{
struct alc_spec *spec;
int err;
ALSA: hda/realtek - Call a common helper for alc_spec initialization Just a clean up by calling the same helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 18:03:15 +02:00
err = alc_alloc_spec(codec, 0x0b);
if (err < 0)
return err;
[ALSA] hda-codec - Add the support of ALC262,ALC883,ALC885,ALC861 Modules: HDA Codec driver,HDA generic driver This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver More models and improvements for ALC880, ALC260 and ALC882 codecs, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-12-05 19:42:22 +01:00
ALSA: hda/realtek - Call a common helper for alc_spec initialization Just a clean up by calling the same helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 18:03:15 +02:00
spec = codec->spec;
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
spec->gen.shared_mic_vref_pin = 0x18;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
#if 0
/* pshou 07/11/05 set a zero PCM sample to DAC when FIFO is
* under-run
*/
{
int tmp;
snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_COEF_INDEX, 7);
tmp = snd_hda_codec_read(codec, 0x20, 0, AC_VERB_GET_PROC_COEF, 0);
snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_COEF_INDEX, 7);
snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_PROC_COEF, tmp | 0x80);
}
#endif
alc_fix_pll_init(codec, 0x20, 0x0a, 10);
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_pick_fixup(codec, alc262_fixup_models, alc262_fixup_tbl,
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
alc262_fixups);
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
[ALSA] Fix/add support of Realtek ALC883 / ALC888 and ALC861 codecs Patch from Realtek: - Fix ALC883 support code - Add support of ALC888 codec - Add ALC660 support (ALC861-compatible) - Add HP xw4400/6400/8400/9400 support (model=hp-bpc) - Code clean-up: fix spaces and indentation Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-28 15:08:22 +02:00
ALSA: hda/realtek - Call alc_auto_parse_customize_define() always after fixup The call for alc_auto_parse_customize_define() must be done after the fixup pre-probe initialization. Otherwise SKU_IGNORE fixup won't work properly (e.g. HP RP5800 with ALC662 codec). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 18:09:48 +02:00
alc_auto_parse_customize_define(codec);
ALSA: hda/realtek - Remove all ALC262-quirk codes Now that model=ultra is supported well by the auto-parser, we can get rid of the whole alc262_quirks.c and its related codes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-07 17:18:44 +01:00
/* automatic parse from the BIOS config */
err = alc262_parse_auto_config(codec);
if (err < 0)
goto error;
[ALSA] hda-codec - Add the support of ALC262,ALC883,ALC885,ALC861 Modules: HDA Codec driver,HDA generic driver This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver More models and improvements for ALC880, ALC260 and ALC882 codecs, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-12-05 19:42:22 +01:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
if (!spec->gen.no_analog && has_cdefine_beep(codec)) {
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
err = snd_hda_attach_beep_device(codec, 0x1);
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
if (err < 0)
goto error;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
}
[ALSA] hda-codec - Add virtual master controls Add master controls using vmaster to codecs that have no real hardware master volume registers. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-10 16:53:55 +01:00
[ALSA] hda-codec - Add the support of ALC262,ALC883,ALC885,ALC861 Modules: HDA Codec driver,HDA generic driver This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver More models and improvements for ALC880, ALC260 and ALC882 codecs, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-12-05 19:42:22 +01:00
codec->patch_ops = alc_patch_ops;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
spec->shutup = alc_eapd_shutup;
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE);
ALSA: hda/realtek - Apply probe-fixup really after probing Move the call of alc_apply_fixup() with ALC_FIXUP_ACT_PROBE after the whole setups of patch_ops & co, so that the fix-up function may override the default setup. This will be needed for installing the own unsol event handler (e.g. for volume-knob controls). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 15:47:55 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
return 0;
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
error:
alc_free(codec);
return err;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
[ALSA] hda-codec - Add ALC861VD/ALC660VD support o Added ALC861VD support to patch_realtek.c under hda-intel o Added ALC660VD as a model of 861VD o Added pci quirks for Asus G1 as well as for two devices found in Realtek's driver to point at ALC660VD model (3stack-660) o Added pci quirk for Lenovo 3000 C200 - although untested, it should work with ALC861VD 3stack model o Changed preset id = 0x10ec0660 to point at new patch_alc861vd instead of patch_861 o Organised the list of presets Signed-off-by: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-02 18:17:27 +01:00
/*
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
* ALC268
[ALSA] hda-codec - Add ALC861VD/ALC660VD support o Added ALC861VD support to patch_realtek.c under hda-intel o Added ALC660VD as a model of 861VD o Added pci quirks for Asus G1 as well as for two devices found in Realtek's driver to point at ALC660VD model (3stack-660) o Added pci quirk for Lenovo 3000 C200 - although untested, it should work with ALC861VD 3stack model o Changed preset id = 0x10ec0660 to point at new patch_alc861vd instead of patch_861 o Organised the list of presets Signed-off-by: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-02 18:17:27 +01:00
*/
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/* bind Beep switches of both NID 0x0f and 0x10 */
static const struct hda_bind_ctls alc268_bind_beep_sw = {
.ops = &snd_hda_bind_sw,
.values = {
HDA_COMPOSE_AMP_VAL(0x0f, 3, 1, HDA_INPUT),
HDA_COMPOSE_AMP_VAL(0x10, 3, 1, HDA_INPUT),
0
},
[ALSA] hda-codec - Add ALC861VD/ALC660VD support o Added ALC861VD support to patch_realtek.c under hda-intel o Added ALC660VD as a model of 861VD o Added pci quirks for Asus G1 as well as for two devices found in Realtek's driver to point at ALC660VD model (3stack-660) o Added pci quirk for Lenovo 3000 C200 - although untested, it should work with ALC861VD 3stack model o Changed preset id = 0x10ec0660 to point at new patch_alc861vd instead of patch_861 o Organised the list of presets Signed-off-by: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-02 18:17:27 +01:00
};
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
static const struct snd_kcontrol_new alc268_beep_mixer[] = {
HDA_CODEC_VOLUME("Beep Playback Volume", 0x1d, 0x0, HDA_INPUT),
HDA_BIND_SW("Beep Playback Switch", &alc268_bind_beep_sw),
{ }
[ALSA] hda-codec - Add ALC861VD/ALC660VD support o Added ALC861VD support to patch_realtek.c under hda-intel o Added ALC660VD as a model of 861VD o Added pci quirks for Asus G1 as well as for two devices found in Realtek's driver to point at ALC660VD model (3stack-660) o Added pci quirk for Lenovo 3000 C200 - although untested, it should work with ALC861VD 3stack model o Changed preset id = 0x10ec0660 to point at new patch_alc861vd instead of patch_861 o Organised the list of presets Signed-off-by: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-02 18:17:27 +01:00
};
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/* set PCBEEP vol = 0, mute connections */
static const struct hda_verb alc268_beep_init_verbs[] = {
{0x1d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
{ }
[ALSA] hda-codec - Add ALC861VD/ALC660VD support o Added ALC861VD support to patch_realtek.c under hda-intel o Added ALC660VD as a model of 861VD o Added pci quirks for Asus G1 as well as for two devices found in Realtek's driver to point at ALC660VD model (3stack-660) o Added pci quirk for Lenovo 3000 C200 - although untested, it should work with ALC861VD 3stack model o Changed preset id = 0x10ec0660 to point at new patch_alc861vd instead of patch_861 o Organised the list of presets Signed-off-by: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-02 18:17:27 +01:00
};
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
enum {
ALC268_FIXUP_INV_DMIC,
ALSA: hda - Fix silent headphone output from Toshiba P200 By some reason, Toshiba laptop doesn't like the EAPD turned up for the headphone pin. Add a fix up code to force to turn down EAPD for NID 0x15. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=569991 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-20 10:55:21 +02:00
ALC268_FIXUP_HP_EAPD,
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
};
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
static const struct hda_fixup alc268_fixups[] = {
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
[ALC268_FIXUP_INV_DMIC] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
.v.func = alc_fixup_inv_dmic_0x12,
},
ALSA: hda - Fix silent headphone output from Toshiba P200 By some reason, Toshiba laptop doesn't like the EAPD turned up for the headphone pin. Add a fix up code to force to turn down EAPD for NID 0x15. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=569991 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-20 10:55:21 +02:00
[ALC268_FIXUP_HP_EAPD] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda - Fix silent headphone output from Toshiba P200 By some reason, Toshiba laptop doesn't like the EAPD turned up for the headphone pin. Add a fix up code to force to turn down EAPD for NID 0x15. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=569991 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-20 10:55:21 +02:00
.v.verbs = (const struct hda_verb[]) {
{0x15, AC_VERB_SET_EAPD_BTLENABLE, 0},
{}
}
},
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
};
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
static const struct hda_model_fixup alc268_fixup_models[] = {
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
{.id = ALC268_FIXUP_INV_DMIC, .name = "inv-dmic"},
ALSA: hda - Fix silent headphone output from Toshiba P200 By some reason, Toshiba laptop doesn't like the EAPD turned up for the headphone pin. Add a fix up code to force to turn down EAPD for NID 0x15. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=569991 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-20 10:55:21 +02:00
{.id = ALC268_FIXUP_HP_EAPD, .name = "hp-eapd"},
{}
};
static const struct snd_pci_quirk alc268_fixup_tbl[] = {
ALSA: hda - fix inverted internal mic on Acer AOA150/ZG5 This patch enables internal mic input on the machine. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1107477 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-28 05:45:47 +01:00
SND_PCI_QUIRK(0x1025, 0x015b, "Acer AOA 150 (ZG5)", ALC268_FIXUP_INV_DMIC),
ALSA: hda - Fix silent headphone output from Toshiba P200 By some reason, Toshiba laptop doesn't like the EAPD turned up for the headphone pin. Add a fix up code to force to turn down EAPD for NID 0x15. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=569991 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-20 10:55:21 +02:00
/* below is codec SSID since multiple Toshiba laptops have the
* same PCI SSID 1179:ff00
*/
SND_PCI_QUIRK(0x1179, 0xff06, "Toshiba P200", ALC268_FIXUP_HP_EAPD),
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
{}
};
[ALSA] hda-codec - Add ALC861VD/ALC660VD support o Added ALC861VD support to patch_realtek.c under hda-intel o Added ALC660VD as a model of 861VD o Added pci quirks for Asus G1 as well as for two devices found in Realtek's driver to point at ALC660VD model (3stack-660) o Added pci quirk for Lenovo 3000 C200 - although untested, it should work with ALC861VD 3stack model o Changed preset id = 0x10ec0660 to point at new patch_alc861vd instead of patch_861 o Organised the list of presets Signed-off-by: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-02 18:17:27 +01:00
/*
* BIOS auto configuration
*/
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
static int alc268_parse_auto_config(struct hda_codec *codec)
[ALSA] hda-codec - Add ALC861VD/ALC660VD support o Added ALC861VD support to patch_realtek.c under hda-intel o Added ALC660VD as a model of 861VD o Added pci quirks for Asus G1 as well as for two devices found in Realtek's driver to point at ALC660VD model (3stack-660) o Added pci quirk for Lenovo 3000 C200 - although untested, it should work with ALC861VD 3stack model o Changed preset id = 0x10ec0660 to point at new patch_alc861vd instead of patch_861 o Organised the list of presets Signed-off-by: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-02 18:17:27 +01:00
{
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
static const hda_nid_t alc268_ssids[] = { 0x15, 0x1b, 0x14, 0 };
[ALSA] hda-codec - Add ALC861VD/ALC660VD support o Added ALC861VD support to patch_realtek.c under hda-intel o Added ALC660VD as a model of 861VD o Added pci quirks for Asus G1 as well as for two devices found in Realtek's driver to point at ALC660VD model (3stack-660) o Added pci quirk for Lenovo 3000 C200 - although untested, it should work with ALC861VD 3stack model o Changed preset id = 0x10ec0660 to point at new patch_alc861vd instead of patch_861 o Organised the list of presets Signed-off-by: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-02 18:17:27 +01:00
struct alc_spec *spec = codec->spec;
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
int err = alc_parse_auto_config(codec, NULL, alc268_ssids);
if (err > 0) {
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
if (!spec->gen.no_analog &&
spec->gen.autocfg.speaker_pins[0] != 0x1d) {
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
add_mixer(spec, alc268_beep_mixer);
ALSA: hda - Move fixup code into struct hda_codec Since the fixup code is used commonly, it's worth to move it to the common place, struct hda_codec, instead of keeping in hda_gen_spec. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-18 18:12:44 +01:00
snd_hda_add_verbs(codec, alc268_beep_init_verbs);
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
}
}
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
return err;
[ALSA] hda-codec - Add ALC861VD/ALC660VD support o Added ALC861VD support to patch_realtek.c under hda-intel o Added ALC660VD as a model of 861VD o Added pci quirks for Asus G1 as well as for two devices found in Realtek's driver to point at ALC660VD model (3stack-660) o Added pci quirk for Lenovo 3000 C200 - although untested, it should work with ALC861VD 3stack model o Changed preset id = 0x10ec0660 to point at new patch_alc861vd instead of patch_861 o Organised the list of presets Signed-off-by: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-02 18:17:27 +01:00
}
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/*
*/
static int patch_alc268(struct hda_codec *codec)
[ALSA] hda-codec - Add ALC861VD/ALC660VD support o Added ALC861VD support to patch_realtek.c under hda-intel o Added ALC660VD as a model of 861VD o Added pci quirks for Asus G1 as well as for two devices found in Realtek's driver to point at ALC660VD model (3stack-660) o Added pci quirk for Lenovo 3000 C200 - although untested, it should work with ALC861VD 3stack model o Changed preset id = 0x10ec0660 to point at new patch_alc861vd instead of patch_861 o Organised the list of presets Signed-off-by: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-02 18:17:27 +01:00
{
struct alc_spec *spec;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
int i, has_beep, err;
[ALSA] hda-codec - Add ALC861VD/ALC660VD support o Added ALC861VD support to patch_realtek.c under hda-intel o Added ALC660VD as a model of 861VD o Added pci quirks for Asus G1 as well as for two devices found in Realtek's driver to point at ALC660VD model (3stack-660) o Added pci quirk for Lenovo 3000 C200 - although untested, it should work with ALC861VD 3stack model o Changed preset id = 0x10ec0660 to point at new patch_alc861vd instead of patch_861 o Organised the list of presets Signed-off-by: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-02 18:17:27 +01:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/* ALC268 has no aa-loopback mixer */
ALSA: hda/realtek - Call a common helper for alc_spec initialization Just a clean up by calling the same helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 18:03:15 +02:00
err = alc_alloc_spec(codec, 0);
if (err < 0)
return err;
spec = codec->spec;
ALSA: hda - Reduce static init verbs for Realtek auto-parsers Instead of using fixed init verbs, initialize DACs, ADCs and mixers more dynamically for Realtek auto-parsers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27 10:52:59 +02:00
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_pick_fixup(codec, alc268_fixup_models, alc268_fixup_tbl, alc268_fixups);
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
ALSA: hda - Remove ALC268 model quirks Get rid of the rest of ALC268 model quirks. They are all confirmed to work with the auto-parser, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-16 15:15:40 +02:00
/* automatic parse from the BIOS config */
err = alc268_parse_auto_config(codec);
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
if (err < 0)
goto error;
[ALSA] hda-codec - Add ALC861VD/ALC660VD support o Added ALC861VD support to patch_realtek.c under hda-intel o Added ALC660VD as a model of 861VD o Added pci quirks for Asus G1 as well as for two devices found in Realtek's driver to point at ALC660VD model (3stack-660) o Added pci quirk for Lenovo 3000 C200 - although untested, it should work with ALC861VD 3stack model o Changed preset id = 0x10ec0660 to point at new patch_alc861vd instead of patch_861 o Organised the list of presets Signed-off-by: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-02 18:17:27 +01:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
has_beep = 0;
for (i = 0; i < spec->num_mixers; i++) {
if (spec->mixers[i] == alc268_beep_mixer) {
has_beep = 1;
break;
}
}
[ALSA] hda-codec - Add ALC861VD/ALC660VD support o Added ALC861VD support to patch_realtek.c under hda-intel o Added ALC660VD as a model of 861VD o Added pci quirks for Asus G1 as well as for two devices found in Realtek's driver to point at ALC660VD model (3stack-660) o Added pci quirk for Lenovo 3000 C200 - although untested, it should work with ALC861VD 3stack model o Changed preset id = 0x10ec0660 to point at new patch_alc861vd instead of patch_861 o Organised the list of presets Signed-off-by: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-02 18:17:27 +01:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
if (has_beep) {
err = snd_hda_attach_beep_device(codec, 0x1);
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
if (err < 0)
goto error;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
if (!query_amp_caps(codec, 0x1d, HDA_INPUT))
/* override the amp caps for beep generator */
snd_hda_override_amp_caps(codec, 0x1d, HDA_INPUT,
(0x0c << AC_AMPCAP_OFFSET_SHIFT) |
(0x0c << AC_AMPCAP_NUM_STEPS_SHIFT) |
(0x07 << AC_AMPCAP_STEP_SIZE_SHIFT) |
(0 << AC_AMPCAP_MUTE_SHIFT));
[ALSA] hda - show correct codec chip in PCM stream names Show more exact codec chip name in the PCM stream name strings. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27 12:14:47 +02:00
}
[ALSA] hda-codec - Add ALC861VD/ALC660VD support o Added ALC861VD support to patch_realtek.c under hda-intel o Added ALC660VD as a model of 861VD o Added pci quirks for Asus G1 as well as for two devices found in Realtek's driver to point at ALC660VD model (3stack-660) o Added pci quirk for Lenovo 3000 C200 - although untested, it should work with ALC861VD 3stack model o Changed preset id = 0x10ec0660 to point at new patch_alc861vd instead of patch_861 o Organised the list of presets Signed-off-by: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-02 18:17:27 +01:00
codec->patch_ops = alc_patch_ops;
ALSA: hda - Introduce shutup callback to Realtek spec struct Add shutup callback to be called codec-specifically for avoiding pop noises at suspend or shutdown. As a generic callback, just turn EAPD off. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-07 10:37:16 +02:00
spec->shutup = alc_eapd_shutup;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE);
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
[ALSA] hda-codec - Add ALC861VD/ALC660VD support o Added ALC861VD support to patch_realtek.c under hda-intel o Added ALC660VD as a model of 861VD o Added pci quirks for Asus G1 as well as for two devices found in Realtek's driver to point at ALC660VD model (3stack-660) o Added pci quirk for Lenovo 3000 C200 - although untested, it should work with ALC861VD 3stack model o Changed preset id = 0x10ec0660 to point at new patch_alc861vd instead of patch_861 o Organised the list of presets Signed-off-by: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-02 18:17:27 +01:00
return 0;
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
error:
alc_free(codec);
return err;
[ALSA] hda-codec - Add ALC861VD/ALC660VD support o Added ALC861VD support to patch_realtek.c under hda-intel o Added ALC660VD as a model of 861VD o Added pci quirks for Asus G1 as well as for two devices found in Realtek's driver to point at ALC660VD model (3stack-660) o Added pci quirk for Lenovo 3000 C200 - although untested, it should work with ALC861VD 3stack model o Changed preset id = 0x10ec0660 to point at new patch_alc861vd instead of patch_861 o Organised the list of presets Signed-off-by: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-02 18:17:27 +01:00
}
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
/*
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
* ALC269
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
*/
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
static int playback_pcm_open(struct hda_pcm_stream *hinfo,
struct hda_codec *codec,
struct snd_pcm_substream *substream)
{
struct hda_gen_spec *spec = codec->spec;
return snd_hda_multi_out_analog_open(codec, &spec->multiout, substream,
hinfo);
}
static int playback_pcm_prepare(struct hda_pcm_stream *hinfo,
struct hda_codec *codec,
unsigned int stream_tag,
unsigned int format,
struct snd_pcm_substream *substream)
{
struct hda_gen_spec *spec = codec->spec;
return snd_hda_multi_out_analog_prepare(codec, &spec->multiout,
stream_tag, format, substream);
}
static int playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
struct hda_codec *codec,
struct snd_pcm_substream *substream)
{
struct hda_gen_spec *spec = codec->spec;
return snd_hda_multi_out_analog_cleanup(codec, &spec->multiout);
}
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
static const struct hda_pcm_stream alc269_44k_pcm_analog_playback = {
.substreams = 1,
.channels_min = 2,
.channels_max = 8,
.rates = SNDRV_PCM_RATE_44100, /* fixed rate */
/* NID is set in alc_build_pcms */
.ops = {
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
.open = playback_pcm_open,
.prepare = playback_pcm_prepare,
.cleanup = playback_pcm_cleanup
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
},
};
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
static const struct hda_pcm_stream alc269_44k_pcm_analog_capture = {
.substreams = 1,
.channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_44100, /* fixed rate */
/* NID is set in alc_build_pcms */
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
};
[ALSA] Support ASUS P701 eeepc [0x1043 0x82a1] support Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 14:28:03 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/* different alc269-variants */
enum {
ALC269_TYPE_ALC269VA,
ALC269_TYPE_ALC269VB,
ALC269_TYPE_ALC269VC,
ALSA: hda/realtek - Add new codec support for ALC269VD Also fix some settings applied only for ALC269VB. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-25 08:08:38 +02:00
ALC269_TYPE_ALC269VD,
ALSA: hda - Add support of new codec ALC284 Added the support for a new codec ALC284, which is compatible with ALC269. Also add more codec variants to handle the SSID check properly. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 10:25:48 +01:00
ALC269_TYPE_ALC280,
ALC269_TYPE_ALC282,
ALC269_TYPE_ALC284,
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
};
/*
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
* BIOS auto configuration
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
*/
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
static int alc269_parse_auto_config(struct hda_codec *codec)
{
static const hda_nid_t alc269_ignore[] = { 0x1d, 0 };
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
static const hda_nid_t alc269_ssids[] = { 0, 0x1b, 0x14, 0x21 };
static const hda_nid_t alc269va_ssids[] = { 0x15, 0x1b, 0x14, 0 };
struct alc_spec *spec = codec->spec;
ALSA: hda/realtek - Add new codec support for ALC269VD Also fix some settings applied only for ALC269VB. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-25 08:08:38 +02:00
const hda_nid_t *ssids;
switch (spec->codec_variant) {
case ALC269_TYPE_ALC269VA:
case ALC269_TYPE_ALC269VC:
ALSA: hda - Add support of new codec ALC284 Added the support for a new codec ALC284, which is compatible with ALC269. Also add more codec variants to handle the SSID check properly. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 10:25:48 +01:00
case ALC269_TYPE_ALC280:
case ALC269_TYPE_ALC284:
ALSA: hda/realtek - Add new codec support for ALC269VD Also fix some settings applied only for ALC269VB. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-25 08:08:38 +02:00
ssids = alc269va_ssids;
break;
case ALC269_TYPE_ALC269VB:
case ALC269_TYPE_ALC269VD:
ALSA: hda - Add support of new codec ALC284 Added the support for a new codec ALC284, which is compatible with ALC269. Also add more codec variants to handle the SSID check properly. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 10:25:48 +01:00
case ALC269_TYPE_ALC282:
ALSA: hda/realtek - Add new codec support for ALC269VD Also fix some settings applied only for ALC269VB. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-25 08:08:38 +02:00
ssids = alc269_ssids;
break;
default:
ssids = alc269_ssids;
break;
}
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
return alc_parse_auto_config(codec, alc269_ignore, ssids);
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
}
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
ALSA: hda - Improve HP depop when system enter to S3 alc269_toggle_power_output() was only use in ALC269VB. I rename it to alc269vb_toggle_power_output(). Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-08 10:23:18 +01:00
static void alc269vb_toggle_power_output(struct hda_codec *codec, int power_up)
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{
int val = alc_read_coef_idx(codec, 0x04);
if (power_up)
val |= 1 << 11;
else
val &= ~(1 << 11);
alc_write_coef_idx(codec, 0x04, val);
}
[ALSA] Support ASUS P701 eeepc [0x1043 0x82a1] support Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 14:28:03 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
static void alc269_shutup(struct hda_codec *codec)
{
ALSA: hda/realtek - Add new codec support for ALC269VD Also fix some settings applied only for ALC269VB. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-25 08:08:38 +02:00
struct alc_spec *spec = codec->spec;
if (spec->codec_variant != ALC269_TYPE_ALC269VB)
return;
ALSA: hda - Improve HP depop when system enter to S3 alc269_toggle_power_output() was only use in ALC269VB. I rename it to alc269vb_toggle_power_output(). Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-08 10:23:18 +01:00
if (spec->codec_variant == ALC269_TYPE_ALC269VB)
alc269vb_toggle_power_output(codec, 0);
if (spec->codec_variant == ALC269_TYPE_ALC269VB &&
(alc_get_coef0(codec) & 0x00ff) == 0x018) {
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
msleep(150);
}
}
[ALSA] Support ASUS P701 eeepc [0x1043 0x82a1] support Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 14:28:03 +02:00
ALSA: hda - Make CONFIG_SND_HDA_POWER_SAVE depending on CONFIG_PM It makes little sense to enable power-saving without PM. This removes SND_HDA_NEEDS_RESUME define so that we can use CONFIG_PM in all places. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-26 09:52:50 +02:00
#ifdef CONFIG_PM
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
static int alc269_resume(struct hda_codec *codec)
{
ALSA: hda/realtek - Add new codec support for ALC269VD Also fix some settings applied only for ALC269VB. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-25 08:08:38 +02:00
struct alc_spec *spec = codec->spec;
ALSA: hda - Improve HP depop when system enter to S3 alc269_toggle_power_output() was only use in ALC269VB. I rename it to alc269vb_toggle_power_output(). Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-08 10:23:18 +01:00
if (spec->codec_variant == ALC269_TYPE_ALC269VB)
alc269vb_toggle_power_output(codec, 0);
if (spec->codec_variant == ALC269_TYPE_ALC269VB &&
ALSA: hda/realtek - Add new codec support for ALC269VD Also fix some settings applied only for ALC269VB. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-25 08:08:38 +02:00
(alc_get_coef0(codec) & 0x00ff) == 0x018) {
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
msleep(150);
}
[ALSA] hda-codec - Update realtek codec support 1. Support HP rp5700 2. Fixed alc_subsystem_id function (Bug fixed and support Desktop) 3. Support ASUS EP20 Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-10 13:03:59 +01:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
codec->patch_ops.init(codec);
ALSA: hda - Add more ALC662/663 codec support - Add support for ECS (1019:9087) - Delete G71V record from alc662_cfg_tbl[] The PCI SubsystemID was the same with M70V - Add more ASUS notebook support Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-26 14:03:29 +02:00
ALSA: hda - Improve HP depop when system enter to S3 alc269_toggle_power_output() was only use in ALC269VB. I rename it to alc269vb_toggle_power_output(). Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-08 10:23:18 +01:00
if (spec->codec_variant == ALC269_TYPE_ALC269VB)
alc269vb_toggle_power_output(codec, 1);
if (spec->codec_variant == ALC269_TYPE_ALC269VB &&
ALSA: hda/realtek - Add new codec support for ALC269VD Also fix some settings applied only for ALC269VB. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-25 08:08:38 +02:00
(alc_get_coef0(codec) & 0x00ff) == 0x017) {
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
msleep(200);
}
ALSA: hda - Add more ALC662/663 codec support - Add support for ECS (1019:9087) - Delete G71V record from alc662_cfg_tbl[] The PCI SubsystemID was the same with M70V - Add more ASUS notebook support Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-26 14:03:29 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
snd_hda_codec_resume_amp(codec);
snd_hda_codec_resume_cache(codec);
hda_call_check_power_status(codec, 0x01);
return 0;
}
ALSA: hda - Make CONFIG_SND_HDA_POWER_SAVE depending on CONFIG_PM It makes little sense to enable power-saving without PM. This removes SND_HDA_NEEDS_RESUME define so that we can use CONFIG_PM in all places. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-26 09:52:50 +02:00
#endif /* CONFIG_PM */
ALSA: hda - Add more ALC662/663 codec support - Add support for ECS (1019:9087) - Delete G71V record from alc662_cfg_tbl[] The PCI SubsystemID was the same with M70V - Add more ASUS notebook support Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-26 14:03:29 +02:00
ALSA: hda - add dock support for Thinkpad X230 Tablet Also add a model/fixup string "lenovo-dock", so that other Thinkpad users will be able to test this fixup easily, to see if it enables dock I/O for them as well. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/1026953 Tested-by: John McCarron <john.mccarron@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-20 10:37:25 +02:00
static void alc269_fixup_pincfg_no_hp_to_lineout(struct hda_codec *codec,
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
const struct hda_fixup *fix, int action)
ALSA: hda - add dock support for Thinkpad X230 Tablet Also add a model/fixup string "lenovo-dock", so that other Thinkpad users will be able to test this fixup easily, to see if it enables dock I/O for them as well. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/1026953 Tested-by: John McCarron <john.mccarron@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-20 10:37:25 +02:00
{
struct alc_spec *spec = codec->spec;
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
if (action == HDA_FIXUP_ACT_PRE_PROBE)
ALSA: hda - add dock support for Thinkpad X230 Tablet Also add a model/fixup string "lenovo-dock", so that other Thinkpad users will be able to test this fixup easily, to see if it enables dock I/O for them as well. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/1026953 Tested-by: John McCarron <john.mccarron@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-20 10:37:25 +02:00
spec->parse_flags = HDA_PINCFG_NO_HP_FIXUP;
}
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
static void alc269_fixup_hweq(struct hda_codec *codec,
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
const struct hda_fixup *fix, int action)
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{
int coef;
ALSA: hda - Add more ALC662/663 codec support - Add support for ECS (1019:9087) - Delete G71V record from alc662_cfg_tbl[] The PCI SubsystemID was the same with M70V - Add more ASUS notebook support Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-26 14:03:29 +02:00
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
if (action != HDA_FIXUP_ACT_INIT)
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
return;
coef = alc_read_coef_idx(codec, 0x1e);
alc_write_coef_idx(codec, 0x1e, coef | 0x80);
}
ALSA: hda - Add more ALC662/663 codec support - Add support for ECS (1019:9087) - Delete G71V record from alc662_cfg_tbl[] The PCI SubsystemID was the same with M70V - Add more ASUS notebook support Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-26 14:03:29 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
static void alc271_fixup_dmic(struct hda_codec *codec,
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
const struct hda_fixup *fix, int action)
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{
static const struct hda_verb verbs[] = {
{0x20, AC_VERB_SET_COEF_INDEX, 0x0d},
{0x20, AC_VERB_SET_PROC_COEF, 0x4000},
{}
};
unsigned int cfg;
ALSA: hda - Add more ALC662/663 codec support - Add support for ECS (1019:9087) - Delete G71V record from alc662_cfg_tbl[] The PCI SubsystemID was the same with M70V - Add more ASUS notebook support Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-26 14:03:29 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
if (strcmp(codec->chip_name, "ALC271X"))
return;
cfg = snd_hda_codec_get_pincfg(codec, 0x12);
if (get_defcfg_connect(cfg) == AC_JACK_PORT_FIXED)
snd_hda_sequence_write(codec, verbs);
}
ALSA: hda - Add more ALC662/663 codec support - Add support for ECS (1019:9087) - Delete G71V record from alc662_cfg_tbl[] The PCI SubsystemID was the same with M70V - Add more ASUS notebook support Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-26 14:03:29 +02:00
ALSA: hda - Implement 44kHz workaround for IdeadPad as fixup Instead of checking the model quirk, use a fixup table for workaround of 44kHz-fixed PCM for Lenovo IdeaPad with ALC269. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-09 14:42:25 +02:00
static void alc269_fixup_pcm_44k(struct hda_codec *codec,
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
const struct hda_fixup *fix, int action)
ALSA: hda - Implement 44kHz workaround for IdeadPad as fixup Instead of checking the model quirk, use a fixup table for workaround of 44kHz-fixed PCM for Lenovo IdeaPad with ALC269. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-09 14:42:25 +02:00
{
struct alc_spec *spec = codec->spec;
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
if (action != HDA_FIXUP_ACT_PROBE)
ALSA: hda - Implement 44kHz workaround for IdeadPad as fixup Instead of checking the model quirk, use a fixup table for workaround of 44kHz-fixed PCM for Lenovo IdeaPad with ALC269. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-09 14:42:25 +02:00
return;
/* Due to a hardware problem on Lenovo Ideadpad, we need to
* fix the sample rate of analog I/O to 44.1kHz
*/
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
spec->gen.stream_analog_playback = &alc269_44k_pcm_analog_playback;
spec->gen.stream_analog_capture = &alc269_44k_pcm_analog_capture;
ALSA: hda - Implement 44kHz workaround for IdeadPad as fixup Instead of checking the model quirk, use a fixup table for workaround of 44kHz-fixed PCM for Lenovo IdeaPad with ALC269. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-09 14:42:25 +02:00
}
ALSA: hda - Fix digital-mic mono recording on ASUS Eee PC The digital-mic unit on ASUS Eee PC gives PDM signals instead of the normal stereo PCM, thus you can't record a mono stream from the stereo stream as is; the summed stereo signal results in almost zero level, and you'll hear only soft noise. As a workaround, use ALC269-specific COEF to manipulate the dmic route for mono, like used for ALC271x. This is implemented as a fix-up, thus it works only with model=auto or without REALTEK_QUIRKS Kconfig. Reported-and-tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-03 07:48:37 +02:00
static void alc269_fixup_stereo_dmic(struct hda_codec *codec,
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
const struct hda_fixup *fix, int action)
ALSA: hda - Fix digital-mic mono recording on ASUS Eee PC The digital-mic unit on ASUS Eee PC gives PDM signals instead of the normal stereo PCM, thus you can't record a mono stream from the stereo stream as is; the summed stereo signal results in almost zero level, and you'll hear only soft noise. As a workaround, use ALC269-specific COEF to manipulate the dmic route for mono, like used for ALC271x. This is implemented as a fix-up, thus it works only with model=auto or without REALTEK_QUIRKS Kconfig. Reported-and-tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-03 07:48:37 +02:00
{
int coef;
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
if (action != HDA_FIXUP_ACT_INIT)
ALSA: hda - Fix digital-mic mono recording on ASUS Eee PC The digital-mic unit on ASUS Eee PC gives PDM signals instead of the normal stereo PCM, thus you can't record a mono stream from the stereo stream as is; the summed stereo signal results in almost zero level, and you'll hear only soft noise. As a workaround, use ALC269-specific COEF to manipulate the dmic route for mono, like used for ALC271x. This is implemented as a fix-up, thus it works only with model=auto or without REALTEK_QUIRKS Kconfig. Reported-and-tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-03 07:48:37 +02:00
return;
/* The digital-mic unit sends PDM (differential signal) instead of
* the standard PCM, thus you can't record a valid mono stream as is.
* Below is a workaround specific to ALC269 to control the dmic
* signal source as mono.
*/
coef = alc_read_coef_idx(codec, 0x07);
alc_write_coef_idx(codec, 0x07, coef | 0x80);
}
ALSA: hda - Replace ALC269 quanta and lifebook models with fixups Implement new fixup entries for Quanta FL1 and Fujitsu Lifebook specific COEF and pin configurations. Removed the model entries from alc269_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-16 15:08:49 +02:00
static void alc269_quanta_automute(struct hda_codec *codec)
{
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
snd_hda_gen_update_outputs(codec);
ALSA: hda - Replace ALC269 quanta and lifebook models with fixups Implement new fixup entries for Quanta FL1 and Fujitsu Lifebook specific COEF and pin configurations. Removed the model entries from alc269_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-16 15:08:49 +02:00
snd_hda_codec_write(codec, 0x20, 0,
AC_VERB_SET_COEF_INDEX, 0x0c);
snd_hda_codec_write(codec, 0x20, 0,
AC_VERB_SET_PROC_COEF, 0x680);
snd_hda_codec_write(codec, 0x20, 0,
AC_VERB_SET_COEF_INDEX, 0x0c);
snd_hda_codec_write(codec, 0x20, 0,
AC_VERB_SET_PROC_COEF, 0x480);
}
static void alc269_fixup_quanta_mute(struct hda_codec *codec,
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
const struct hda_fixup *fix, int action)
ALSA: hda - Replace ALC269 quanta and lifebook models with fixups Implement new fixup entries for Quanta FL1 and Fujitsu Lifebook specific COEF and pin configurations. Removed the model entries from alc269_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-16 15:08:49 +02:00
{
struct alc_spec *spec = codec->spec;
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
if (action != HDA_FIXUP_ACT_PROBE)
ALSA: hda - Replace ALC269 quanta and lifebook models with fixups Implement new fixup entries for Quanta FL1 and Fujitsu Lifebook specific COEF and pin configurations. Removed the model entries from alc269_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-16 15:08:49 +02:00
return;
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
spec->gen.automute_hook = alc269_quanta_automute;
ALSA: hda - Replace ALC269 quanta and lifebook models with fixups Implement new fixup entries for Quanta FL1 and Fujitsu Lifebook specific COEF and pin configurations. Removed the model entries from alc269_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-16 15:08:49 +02:00
}
ALSA: hda/realtek - Generic mute LED implementation for HP laptops As David Henningsson recently suggested, some HP laptops use an unused mic pin for controlling a mute LED, and this information is provided via DMI string "HP_Mute_LED_X_Y" string. This patch adds the generic support for such cases, as we've already done in patch_sigmatel.c. This is applied generically to all devices with ID 0x103c. But as we don't know whether the device 103c:1586 really contains HP_Mute_LED_X_Y DMI string, still keep the static setup for this device using the mic2 pin 0x19. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:33:58 +01:00
/* update mute-LED according to the speaker mute state via mic VREF pin */
static void alc269_fixup_mic_mute_hook(void *private_data, int enabled)
ALSA: hda - add mute LED for HP Pavilion 17 (Realtek codec) The mute LED is in this case connected to the Mic1 VREF. The machine also exposes the following string in BIOS: "HP_Mute_LED_0_A", so if more machines are coming, it probably makes sense to try to do something more generic, like for the IDT codec. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1096789 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-07 12:03:47 +01:00
{
struct hda_codec *codec = private_data;
ALSA: hda/realtek - Generic mute LED implementation for HP laptops As David Henningsson recently suggested, some HP laptops use an unused mic pin for controlling a mute LED, and this information is provided via DMI string "HP_Mute_LED_X_Y" string. This patch adds the generic support for such cases, as we've already done in patch_sigmatel.c. This is applied generically to all devices with ID 0x103c. But as we don't know whether the device 103c:1586 really contains HP_Mute_LED_X_Y DMI string, still keep the static setup for this device using the mic2 pin 0x19. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:33:58 +01:00
struct alc_spec *spec = codec->spec;
unsigned int pinval;
if (spec->mute_led_polarity)
enabled = !enabled;
pinval = AC_PINCTL_IN_EN |
(enabled ? AC_PINCTL_VREF_HIZ : AC_PINCTL_VREF_80);
if (spec->mute_led_nid)
snd_hda_set_pin_ctl_cache(codec, spec->mute_led_nid, pinval);
ALSA: hda - add mute LED for HP Pavilion 17 (Realtek codec) The mute LED is in this case connected to the Mic1 VREF. The machine also exposes the following string in BIOS: "HP_Mute_LED_0_A", so if more machines are coming, it probably makes sense to try to do something more generic, like for the IDT codec. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1096789 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-07 12:03:47 +01:00
}
ALSA: hda/realtek - Generic mute LED implementation for HP laptops As David Henningsson recently suggested, some HP laptops use an unused mic pin for controlling a mute LED, and this information is provided via DMI string "HP_Mute_LED_X_Y" string. This patch adds the generic support for such cases, as we've already done in patch_sigmatel.c. This is applied generically to all devices with ID 0x103c. But as we don't know whether the device 103c:1586 really contains HP_Mute_LED_X_Y DMI string, still keep the static setup for this device using the mic2 pin 0x19. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:33:58 +01:00
static void alc269_fixup_hp_mute_led(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
ALSA: hda - add mute LED for HP Pavilion 17 (Realtek codec) The mute LED is in this case connected to the Mic1 VREF. The machine also exposes the following string in BIOS: "HP_Mute_LED_0_A", so if more machines are coming, it probably makes sense to try to do something more generic, like for the IDT codec. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1096789 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-07 12:03:47 +01:00
{
struct alc_spec *spec = codec->spec;
ALSA: hda/realtek - Generic mute LED implementation for HP laptops As David Henningsson recently suggested, some HP laptops use an unused mic pin for controlling a mute LED, and this information is provided via DMI string "HP_Mute_LED_X_Y" string. This patch adds the generic support for such cases, as we've already done in patch_sigmatel.c. This is applied generically to all devices with ID 0x103c. But as we don't know whether the device 103c:1586 really contains HP_Mute_LED_X_Y DMI string, still keep the static setup for this device using the mic2 pin 0x19. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:33:58 +01:00
const struct dmi_device *dev = NULL;
if (action != HDA_FIXUP_ACT_PRE_PROBE)
return;
while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) {
int pol, pin;
if (sscanf(dev->name, "HP_Mute_LED_%d_%x", &pol, &pin) != 2)
continue;
if (pin < 0x0a || pin >= 0x10)
break;
spec->mute_led_polarity = pol;
spec->mute_led_nid = pin - 0x0a + 0x18;
spec->gen.vmaster_mute.hook = alc269_fixup_mic_mute_hook;
ALSA: hda - Add spec->vmaster_mute_enum flag to generic parser Add a flag to indicate whether the vmaster mute hook enum is exposed or not. Conexant codecs may want not to expose the control depending on the model. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-20 14:57:18 +01:00
spec->gen.vmaster_mute_enum = 1;
ALSA: hda/realtek - Generic mute LED implementation for HP laptops As David Henningsson recently suggested, some HP laptops use an unused mic pin for controlling a mute LED, and this information is provided via DMI string "HP_Mute_LED_X_Y" string. This patch adds the generic support for such cases, as we've already done in patch_sigmatel.c. This is applied generically to all devices with ID 0x103c. But as we don't know whether the device 103c:1586 really contains HP_Mute_LED_X_Y DMI string, still keep the static setup for this device using the mic2 pin 0x19. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:33:58 +01:00
snd_printd("Detected mute LED for %x:%d\n", spec->mute_led_nid,
spec->mute_led_polarity);
ALSA: hda - add mute LED for HP Pavilion 17 (Realtek codec) The mute LED is in this case connected to the Mic1 VREF. The machine also exposes the following string in BIOS: "HP_Mute_LED_0_A", so if more machines are coming, it probably makes sense to try to do something more generic, like for the IDT codec. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1096789 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-07 12:03:47 +01:00
break;
}
}
ALSA: hda - add quirks for mute LED on two HP machines These two machines have no mute LED string in BIOS. BugLink: https://bugs.launchpad.net/bugs/1128934 Tested-by: Tammy Yang <tammy.yang@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-18 11:41:55 +01:00
static void alc269_fixup_hp_mute_led_mic1(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
struct alc_spec *spec = codec->spec;
if (action == HDA_FIXUP_ACT_PRE_PROBE) {
spec->mute_led_polarity = 0;
spec->mute_led_nid = 0x18;
spec->gen.vmaster_mute.hook = alc269_fixup_mic_mute_hook;
spec->gen.vmaster_mute_enum = 1;
}
}
ALSA: hda/realtek - Generic mute LED implementation for HP laptops As David Henningsson recently suggested, some HP laptops use an unused mic pin for controlling a mute LED, and this information is provided via DMI string "HP_Mute_LED_X_Y" string. This patch adds the generic support for such cases, as we've already done in patch_sigmatel.c. This is applied generically to all devices with ID 0x103c. But as we don't know whether the device 103c:1586 really contains HP_Mute_LED_X_Y DMI string, still keep the static setup for this device using the mic2 pin 0x19. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:33:58 +01:00
static void alc269_fixup_hp_mute_led_mic2(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
ALSA: hda - Rewrite the mute-LED control with vmaster hook for ALC269 We've had ugly static handling of the mute-LED with a powersave hook for ALC269 HP laptops just like done in patch_sigmatel.c. This is now rewritten with the new vmaster hook and a fixup code. For that, the new fixup action, ALC_FIXUP_ACT_BUILD, is introduced. It's called after build_controls is called. The reason of this new action is that vmaster hook must be added at this stage (not in init or probe). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-12 12:35:27 +01:00
{
struct alc_spec *spec = codec->spec;
ALSA: hda/realtek - Fix the timing for some fixups Some fixups such as setting the flags influencing on the parser behavior should be applied before actually parsing the tree. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:14:29 +01:00
if (action == HDA_FIXUP_ACT_PRE_PROBE) {
ALSA: hda/realtek - Generic mute LED implementation for HP laptops As David Henningsson recently suggested, some HP laptops use an unused mic pin for controlling a mute LED, and this information is provided via DMI string "HP_Mute_LED_X_Y" string. This patch adds the generic support for such cases, as we've already done in patch_sigmatel.c. This is applied generically to all devices with ID 0x103c. But as we don't know whether the device 103c:1586 really contains HP_Mute_LED_X_Y DMI string, still keep the static setup for this device using the mic2 pin 0x19. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:33:58 +01:00
spec->mute_led_polarity = 0;
spec->mute_led_nid = 0x19;
spec->gen.vmaster_mute.hook = alc269_fixup_mic_mute_hook;
ALSA: hda - Add spec->vmaster_mute_enum flag to generic parser Add a flag to indicate whether the vmaster mute hook enum is exposed or not. Conexant codecs may want not to expose the control depending on the model. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-20 14:57:18 +01:00
spec->gen.vmaster_mute_enum = 1;
ALSA: hda - Rewrite the mute-LED control with vmaster hook for ALC269 We've had ugly static handling of the mute-LED with a powersave hook for ALC269 HP laptops just like done in patch_sigmatel.c. This is now rewritten with the new vmaster hook and a fixup code. For that, the new fixup action, ALC_FIXUP_ACT_BUILD, is introduced. It's called after build_controls is called. The reason of this new action is that vmaster hook must be added at this stage (not in init or probe). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-12 12:35:27 +01:00
}
}
ALSA: hda - Fix Acer Aspire models with analog mics. The Acer Aspire AO756 has an analog built-in mic on nid 0x1b and an external mic on nid 0x19. The BIOS doesn't set this up. The mic detect on this Acer Aspire netbook and Acer C7 ChromeBook is only valid when the headphone is plugged. The detect circuit relies on the tip detect switch being closed on the jack. Tell hda_jack to ignore the mic sense unless the headphones are plugged. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-18 22:56:40 -08:00
static void alc271_hp_gate_mic_jack(struct hda_codec *codec,
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
const struct hda_fixup *fix,
ALSA: hda - Fix Acer Aspire models with analog mics. The Acer Aspire AO756 has an analog built-in mic on nid 0x1b and an external mic on nid 0x19. The BIOS doesn't set this up. The mic detect on this Acer Aspire netbook and Acer C7 ChromeBook is only valid when the headphone is plugged. The detect circuit relies on the tip detect switch being closed on the jack. Tell hda_jack to ignore the mic sense unless the headphones are plugged. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-18 22:56:40 -08:00
int action)
{
struct alc_spec *spec = codec->spec;
ALSA: hda - Fix invalid snd_BUG_ON() in alc271_hp_gate_mic_jack() The fixup function is called multiple times before parsing the pins, so snd_BUG_ON() hits when loaded. Move it to the proper place in the if block. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-23 13:57:20 +01:00
if (action == HDA_FIXUP_ACT_PROBE) {
if (snd_BUG_ON(!spec->gen.am_entry[1].pin ||
!spec->gen.autocfg.hp_pins[0]))
return;
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
snd_hda_jack_set_gating_jack(codec, spec->gen.am_entry[1].pin,
spec->gen.autocfg.hp_pins[0]);
ALSA: hda - Fix invalid snd_BUG_ON() in alc271_hp_gate_mic_jack() The fixup function is called multiple times before parsing the pins, so snd_BUG_ON() hits when loaded. Move it to the proper place in the if block. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-23 13:57:20 +01:00
}
ALSA: hda - Fix Acer Aspire models with analog mics. The Acer Aspire AO756 has an analog built-in mic on nid 0x1b and an external mic on nid 0x19. The BIOS doesn't set this up. The mic detect on this Acer Aspire netbook and Acer C7 ChromeBook is only valid when the headphone is plugged. The detect circuit relies on the tip detect switch being closed on the jack. Tell hda_jack to ignore the mic sense unless the headphones are plugged. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-18 22:56:40 -08:00
}
ALSA: hda - Add inverted mic quirks for Asus U41SV, Acer 1810TZ and AOD260 These machines have inverted phase on right channel for their internal mics. BugLink: https://bugs.launchpad.net/bugs/997227 BugLink: https://bugs.launchpad.net/bugs/996611 BugLink: https://bugs.launchpad.net/bugs/1006089 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-22 19:12:10 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
enum {
ALC269_FIXUP_SONY_VAIO,
ALC275_FIXUP_SONY_VAIO_GPIO2,
ALC269_FIXUP_DELL_M101Z,
ALC269_FIXUP_SKU_IGNORE,
ALC269_FIXUP_ASUS_G73JW,
ALC269_FIXUP_LENOVO_EAPD,
ALC275_FIXUP_SONY_HWEQ,
ALC271_FIXUP_DMIC,
ALSA: hda - Implement 44kHz workaround for IdeadPad as fixup Instead of checking the model quirk, use a fixup table for workaround of 44kHz-fixed PCM for Lenovo IdeaPad with ALC269. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-09 14:42:25 +02:00
ALC269_FIXUP_PCM_44K,
ALSA: hda - Fix digital-mic mono recording on ASUS Eee PC The digital-mic unit on ASUS Eee PC gives PDM signals instead of the normal stereo PCM, thus you can't record a mono stream from the stereo stream as is; the summed stereo signal results in almost zero level, and you'll hear only soft noise. As a workaround, use ALC269-specific COEF to manipulate the dmic route for mono, like used for ALC271x. This is implemented as a fix-up, thus it works only with model=auto or without REALTEK_QUIRKS Kconfig. Reported-and-tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-03 07:48:37 +02:00
ALC269_FIXUP_STEREO_DMIC,
ALSA: hda - Replace ALC269 quanta and lifebook models with fixups Implement new fixup entries for Quanta FL1 and Fujitsu Lifebook specific COEF and pin configurations. Removed the model entries from alc269_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-16 15:08:49 +02:00
ALC269_FIXUP_QUANTA_MUTE,
ALC269_FIXUP_LIFEBOOK,
ALSA: hda - Rewrite ALC269 laptop-amic,dmic,&co quirks with fixups Similarly like ALC662 asus-mode* models, rewrite the laptop-amic and dmic models with the static pin-config tables. Now we can get rid of all alc269_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:40:12 +02:00
ALC269_FIXUP_AMIC,
ALC269_FIXUP_DMIC,
ALC269VB_FIXUP_AMIC,
ALC269VB_FIXUP_DMIC,
ALSA: hda/realtek - Generic mute LED implementation for HP laptops As David Henningsson recently suggested, some HP laptops use an unused mic pin for controlling a mute LED, and this information is provided via DMI string "HP_Mute_LED_X_Y" string. This patch adds the generic support for such cases, as we've already done in patch_sigmatel.c. This is applied generically to all devices with ID 0x103c. But as we don't know whether the device 103c:1586 really contains HP_Mute_LED_X_Y DMI string, still keep the static setup for this device using the mic2 pin 0x19. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:33:58 +01:00
ALC269_FIXUP_HP_MUTE_LED,
ALSA: hda - add quirks for mute LED on two HP machines These two machines have no mute LED string in BIOS. BugLink: https://bugs.launchpad.net/bugs/1128934 Tested-by: Tammy Yang <tammy.yang@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-18 11:41:55 +01:00
ALC269_FIXUP_HP_MUTE_LED_MIC1,
ALSA: hda/realtek - Generic mute LED implementation for HP laptops As David Henningsson recently suggested, some HP laptops use an unused mic pin for controlling a mute LED, and this information is provided via DMI string "HP_Mute_LED_X_Y" string. This patch adds the generic support for such cases, as we've already done in patch_sigmatel.c. This is applied generically to all devices with ID 0x103c. But as we don't know whether the device 103c:1586 really contains HP_Mute_LED_X_Y DMI string, still keep the static setup for this device using the mic2 pin 0x19. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:33:58 +01:00
ALC269_FIXUP_HP_MUTE_LED_MIC2,
ALSA: hda - Add inverted mic quirks for Asus U41SV, Acer 1810TZ and AOD260 These machines have inverted phase on right channel for their internal mics. BugLink: https://bugs.launchpad.net/bugs/997227 BugLink: https://bugs.launchpad.net/bugs/996611 BugLink: https://bugs.launchpad.net/bugs/1006089 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-22 19:12:10 +02:00
ALC269_FIXUP_INV_DMIC,
ALSA: hda - add dock support for Thinkpad X230 Tablet Also add a model/fixup string "lenovo-dock", so that other Thinkpad users will be able to test this fixup easily, to see if it enables dock I/O for them as well. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/1026953 Tested-by: John McCarron <john.mccarron@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-20 10:37:25 +02:00
ALC269_FIXUP_LENOVO_DOCK,
ALC269_FIXUP_PINCFG_NO_HP_TO_LINEOUT,
ALSA: hda - Fix Acer Aspire models with analog mics. The Acer Aspire AO756 has an analog built-in mic on nid 0x1b and an external mic on nid 0x19. The BIOS doesn't set this up. The mic detect on this Acer Aspire netbook and Acer C7 ChromeBook is only valid when the headphone is plugged. The detect circuit relies on the tip detect switch being closed on the jack. Tell hda_jack to ignore the mic sense unless the headphones are plugged. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-18 22:56:40 -08:00
ALC271_FIXUP_AMIC_MIC2,
ALC271_FIXUP_HP_GATE_MIC_JACK,
ALSA: hda - Add more ALC662/663 codec support - Add support for ECS (1019:9087) - Delete G71V record from alc662_cfg_tbl[] The PCI SubsystemID was the same with M70V - Add more ASUS notebook support Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-26 14:03:29 +02:00
};
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
static const struct hda_fixup alc269_fixups[] = {
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
[ALC269_FIXUP_SONY_VAIO] = {
ALSA: hda - Add a new fixup type to override pinctl values Add a new fixup type, HDA_FIXUP_PINCTLS, for overriding the pinctl values of the given pins. It takes the same array of struct pintbl like HDA_FIXUP_PINS, but each entry contains the pinctl value instead of the pin default config value. This patch also replaces the corresponding codes in patch_realtek.c. Without this change, the direct call of verbs may be overridden again by the later call of pinctl restoration by the driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 10:18:14 +01:00
.type = HDA_FIXUP_PINCTLS,
.v.pins = (const struct hda_pintbl[]) {
{0x19, PIN_VREFGRD},
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{}
}
ALSA: hda - Add more ALC662/663 codec support - Add support for ECS (1019:9087) - Delete G71V record from alc662_cfg_tbl[] The PCI SubsystemID was the same with M70V - Add more ASUS notebook support Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-26 14:03:29 +02:00
},
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
[ALC275_FIXUP_SONY_VAIO_GPIO2] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
.v.verbs = (const struct hda_verb[]) {
{0x01, AC_VERB_SET_GPIO_MASK, 0x04},
{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x04},
{0x01, AC_VERB_SET_GPIO_DATA, 0x00},
{ }
},
.chained = true,
.chain_id = ALC269_FIXUP_SONY_VAIO
},
[ALC269_FIXUP_DELL_M101Z] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
.v.verbs = (const struct hda_verb[]) {
/* Enables internal speaker */
{0x20, AC_VERB_SET_COEF_INDEX, 13},
{0x20, AC_VERB_SET_PROC_COEF, 0x4040},
{}
}
},
[ALC269_FIXUP_SKU_IGNORE] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda - Move up the fixup helper functions to the library module Move the fixup helper functions in patch_realtek.c to hda_auto_parser.c so that they can be used in other codec drivers like patch_conexant.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 17:17:32 +02:00
.v.func = alc_fixup_sku_ignore,
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
},
[ALC269_FIXUP_ASUS_G73JW] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{ 0x17, 0x99130111 }, /* subwoofer */
{ }
}
},
[ALC269_FIXUP_LENOVO_EAPD] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
.v.verbs = (const struct hda_verb[]) {
{0x14, AC_VERB_SET_EAPD_BTLENABLE, 0},
{}
}
},
[ALC275_FIXUP_SONY_HWEQ] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
.v.func = alc269_fixup_hweq,
.chained = true,
.chain_id = ALC275_FIXUP_SONY_VAIO_GPIO2
},
[ALC271_FIXUP_DMIC] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
.v.func = alc271_fixup_dmic,
ALSA: hda - Add more ALC662/663 codec support - Add support for ECS (1019:9087) - Delete G71V record from alc662_cfg_tbl[] The PCI SubsystemID was the same with M70V - Add more ASUS notebook support Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-26 14:03:29 +02:00
},
ALSA: hda - Implement 44kHz workaround for IdeadPad as fixup Instead of checking the model quirk, use a fixup table for workaround of 44kHz-fixed PCM for Lenovo IdeaPad with ALC269. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-09 14:42:25 +02:00
[ALC269_FIXUP_PCM_44K] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda - Implement 44kHz workaround for IdeadPad as fixup Instead of checking the model quirk, use a fixup table for workaround of 44kHz-fixed PCM for Lenovo IdeaPad with ALC269. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-09 14:42:25 +02:00
.v.func = alc269_fixup_pcm_44k,
ALSA: hda - Fix double quirk for Quanta FL1 / Lenovo Ideapad The same ID is twice in the quirk table, so the second one is not used. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Cc: <stable@vger.kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-08 08:43:37 +02:00
.chained = true,
.chain_id = ALC269_FIXUP_QUANTA_MUTE
ALSA: hda - Implement 44kHz workaround for IdeadPad as fixup Instead of checking the model quirk, use a fixup table for workaround of 44kHz-fixed PCM for Lenovo IdeaPad with ALC269. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-09 14:42:25 +02:00
},
ALSA: hda - Fix digital-mic mono recording on ASUS Eee PC The digital-mic unit on ASUS Eee PC gives PDM signals instead of the normal stereo PCM, thus you can't record a mono stream from the stereo stream as is; the summed stereo signal results in almost zero level, and you'll hear only soft noise. As a workaround, use ALC269-specific COEF to manipulate the dmic route for mono, like used for ALC271x. This is implemented as a fix-up, thus it works only with model=auto or without REALTEK_QUIRKS Kconfig. Reported-and-tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-03 07:48:37 +02:00
[ALC269_FIXUP_STEREO_DMIC] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda - Fix digital-mic mono recording on ASUS Eee PC The digital-mic unit on ASUS Eee PC gives PDM signals instead of the normal stereo PCM, thus you can't record a mono stream from the stereo stream as is; the summed stereo signal results in almost zero level, and you'll hear only soft noise. As a workaround, use ALC269-specific COEF to manipulate the dmic route for mono, like used for ALC271x. This is implemented as a fix-up, thus it works only with model=auto or without REALTEK_QUIRKS Kconfig. Reported-and-tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-03 07:48:37 +02:00
.v.func = alc269_fixup_stereo_dmic,
},
ALSA: hda - Replace ALC269 quanta and lifebook models with fixups Implement new fixup entries for Quanta FL1 and Fujitsu Lifebook specific COEF and pin configurations. Removed the model entries from alc269_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-16 15:08:49 +02:00
[ALC269_FIXUP_QUANTA_MUTE] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda - Replace ALC269 quanta and lifebook models with fixups Implement new fixup entries for Quanta FL1 and Fujitsu Lifebook specific COEF and pin configurations. Removed the model entries from alc269_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-16 15:08:49 +02:00
.v.func = alc269_fixup_quanta_mute,
},
[ALC269_FIXUP_LIFEBOOK] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - Replace ALC269 quanta and lifebook models with fixups Implement new fixup entries for Quanta FL1 and Fujitsu Lifebook specific COEF and pin configurations. Removed the model entries from alc269_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-16 15:08:49 +02:00
{ 0x1a, 0x2101103f }, /* dock line-out */
{ 0x1b, 0x23a11040 }, /* dock mic-in */
{ }
},
.chained = true,
.chain_id = ALC269_FIXUP_QUANTA_MUTE
},
ALSA: hda - Rewrite ALC269 laptop-amic,dmic,&co quirks with fixups Similarly like ALC662 asus-mode* models, rewrite the laptop-amic and dmic models with the static pin-config tables. Now we can get rid of all alc269_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:40:12 +02:00
[ALC269_FIXUP_AMIC] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - Rewrite ALC269 laptop-amic,dmic,&co quirks with fixups Similarly like ALC662 asus-mode* models, rewrite the laptop-amic and dmic models with the static pin-config tables. Now we can get rid of all alc269_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:40:12 +02:00
{ 0x14, 0x99130110 }, /* speaker */
{ 0x15, 0x0121401f }, /* HP out */
{ 0x18, 0x01a19c20 }, /* mic */
{ 0x19, 0x99a3092f }, /* int-mic */
{ }
},
},
[ALC269_FIXUP_DMIC] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - Rewrite ALC269 laptop-amic,dmic,&co quirks with fixups Similarly like ALC662 asus-mode* models, rewrite the laptop-amic and dmic models with the static pin-config tables. Now we can get rid of all alc269_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:40:12 +02:00
{ 0x12, 0x99a3092f }, /* int-mic */
{ 0x14, 0x99130110 }, /* speaker */
{ 0x15, 0x0121401f }, /* HP out */
{ 0x18, 0x01a19c20 }, /* mic */
{ }
},
},
[ALC269VB_FIXUP_AMIC] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - Rewrite ALC269 laptop-amic,dmic,&co quirks with fixups Similarly like ALC662 asus-mode* models, rewrite the laptop-amic and dmic models with the static pin-config tables. Now we can get rid of all alc269_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:40:12 +02:00
{ 0x14, 0x99130110 }, /* speaker */
{ 0x18, 0x01a19c20 }, /* mic */
{ 0x19, 0x99a3092f }, /* int-mic */
{ 0x21, 0x0121401f }, /* HP out */
{ }
},
},
ALSA: HDA: Fix typo for ALC269VB_FIXUP_DMIC This fixup is not actually used, so in practice this is just a cosmetic fix. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-03 08:45:56 +01:00
[ALC269VB_FIXUP_DMIC] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - Rewrite ALC269 laptop-amic,dmic,&co quirks with fixups Similarly like ALC662 asus-mode* models, rewrite the laptop-amic and dmic models with the static pin-config tables. Now we can get rid of all alc269_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:40:12 +02:00
{ 0x12, 0x99a3092f }, /* int-mic */
{ 0x14, 0x99130110 }, /* speaker */
{ 0x18, 0x01a19c20 }, /* mic */
{ 0x21, 0x0121401f }, /* HP out */
{ }
},
},
ALSA: hda/realtek - Generic mute LED implementation for HP laptops As David Henningsson recently suggested, some HP laptops use an unused mic pin for controlling a mute LED, and this information is provided via DMI string "HP_Mute_LED_X_Y" string. This patch adds the generic support for such cases, as we've already done in patch_sigmatel.c. This is applied generically to all devices with ID 0x103c. But as we don't know whether the device 103c:1586 really contains HP_Mute_LED_X_Y DMI string, still keep the static setup for this device using the mic2 pin 0x19. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:33:58 +01:00
[ALC269_FIXUP_HP_MUTE_LED] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda/realtek - Generic mute LED implementation for HP laptops As David Henningsson recently suggested, some HP laptops use an unused mic pin for controlling a mute LED, and this information is provided via DMI string "HP_Mute_LED_X_Y" string. This patch adds the generic support for such cases, as we've already done in patch_sigmatel.c. This is applied generically to all devices with ID 0x103c. But as we don't know whether the device 103c:1586 really contains HP_Mute_LED_X_Y DMI string, still keep the static setup for this device using the mic2 pin 0x19. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:33:58 +01:00
.v.func = alc269_fixup_hp_mute_led,
ALSA: hda - add mute LED for HP Pavilion 17 (Realtek codec) The mute LED is in this case connected to the Mic1 VREF. The machine also exposes the following string in BIOS: "HP_Mute_LED_0_A", so if more machines are coming, it probably makes sense to try to do something more generic, like for the IDT codec. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1096789 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-07 12:03:47 +01:00
},
ALSA: hda - add quirks for mute LED on two HP machines These two machines have no mute LED string in BIOS. BugLink: https://bugs.launchpad.net/bugs/1128934 Tested-by: Tammy Yang <tammy.yang@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-18 11:41:55 +01:00
[ALC269_FIXUP_HP_MUTE_LED_MIC1] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc269_fixup_hp_mute_led_mic1,
},
ALSA: hda/realtek - Generic mute LED implementation for HP laptops As David Henningsson recently suggested, some HP laptops use an unused mic pin for controlling a mute LED, and this information is provided via DMI string "HP_Mute_LED_X_Y" string. This patch adds the generic support for such cases, as we've already done in patch_sigmatel.c. This is applied generically to all devices with ID 0x103c. But as we don't know whether the device 103c:1586 really contains HP_Mute_LED_X_Y DMI string, still keep the static setup for this device using the mic2 pin 0x19. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:33:58 +01:00
[ALC269_FIXUP_HP_MUTE_LED_MIC2] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda/realtek - Generic mute LED implementation for HP laptops As David Henningsson recently suggested, some HP laptops use an unused mic pin for controlling a mute LED, and this information is provided via DMI string "HP_Mute_LED_X_Y" string. This patch adds the generic support for such cases, as we've already done in patch_sigmatel.c. This is applied generically to all devices with ID 0x103c. But as we don't know whether the device 103c:1586 really contains HP_Mute_LED_X_Y DMI string, still keep the static setup for this device using the mic2 pin 0x19. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:33:58 +01:00
.v.func = alc269_fixup_hp_mute_led_mic2,
ALSA: hda - Rewrite the mute-LED control with vmaster hook for ALC269 We've had ugly static handling of the mute-LED with a powersave hook for ALC269 HP laptops just like done in patch_sigmatel.c. This is now rewritten with the new vmaster hook and a fixup code. For that, the new fixup action, ALC_FIXUP_ACT_BUILD, is introduced. It's called after build_controls is called. The reason of this new action is that vmaster hook must be added at this stage (not in init or probe). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-12 12:35:27 +01:00
},
ALSA: hda - Add inverted mic quirks for Asus U41SV, Acer 1810TZ and AOD260 These machines have inverted phase on right channel for their internal mics. BugLink: https://bugs.launchpad.net/bugs/997227 BugLink: https://bugs.launchpad.net/bugs/996611 BugLink: https://bugs.launchpad.net/bugs/1006089 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-22 19:12:10 +02:00
[ALC269_FIXUP_INV_DMIC] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
.v.func = alc_fixup_inv_dmic_0x12,
ALSA: hda - Add inverted mic quirks for Asus U41SV, Acer 1810TZ and AOD260 These machines have inverted phase on right channel for their internal mics. BugLink: https://bugs.launchpad.net/bugs/997227 BugLink: https://bugs.launchpad.net/bugs/996611 BugLink: https://bugs.launchpad.net/bugs/1006089 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-22 19:12:10 +02:00
},
ALSA: hda - add dock support for Thinkpad X230 Tablet Also add a model/fixup string "lenovo-dock", so that other Thinkpad users will be able to test this fixup easily, to see if it enables dock I/O for them as well. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/1026953 Tested-by: John McCarron <john.mccarron@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-20 10:37:25 +02:00
[ALC269_FIXUP_LENOVO_DOCK] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - add dock support for Thinkpad X230 Tablet Also add a model/fixup string "lenovo-dock", so that other Thinkpad users will be able to test this fixup easily, to see if it enables dock I/O for them as well. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/1026953 Tested-by: John McCarron <john.mccarron@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-20 10:37:25 +02:00
{ 0x19, 0x23a11040 }, /* dock mic */
{ 0x1b, 0x2121103f }, /* dock headphone */
{ }
},
.chained = true,
.chain_id = ALC269_FIXUP_PINCFG_NO_HP_TO_LINEOUT
},
[ALC269_FIXUP_PINCFG_NO_HP_TO_LINEOUT] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda - add dock support for Thinkpad X230 Tablet Also add a model/fixup string "lenovo-dock", so that other Thinkpad users will be able to test this fixup easily, to see if it enables dock I/O for them as well. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/1026953 Tested-by: John McCarron <john.mccarron@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-20 10:37:25 +02:00
.v.func = alc269_fixup_pincfg_no_hp_to_lineout,
},
ALSA: hda - Fix Acer Aspire models with analog mics. The Acer Aspire AO756 has an analog built-in mic on nid 0x1b and an external mic on nid 0x19. The BIOS doesn't set this up. The mic detect on this Acer Aspire netbook and Acer C7 ChromeBook is only valid when the headphone is plugged. The detect circuit relies on the tip detect switch being closed on the jack. Tell hda_jack to ignore the mic sense unless the headphones are plugged. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-18 22:56:40 -08:00
[ALC271_FIXUP_AMIC_MIC2] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - Fix Acer Aspire models with analog mics. The Acer Aspire AO756 has an analog built-in mic on nid 0x1b and an external mic on nid 0x19. The BIOS doesn't set this up. The mic detect on this Acer Aspire netbook and Acer C7 ChromeBook is only valid when the headphone is plugged. The detect circuit relies on the tip detect switch being closed on the jack. Tell hda_jack to ignore the mic sense unless the headphones are plugged. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-18 22:56:40 -08:00
{ 0x14, 0x99130110 }, /* speaker */
{ 0x19, 0x01a19c20 }, /* mic */
{ 0x1b, 0x99a7012f }, /* int-mic */
{ 0x21, 0x0121401f }, /* HP out */
{ }
},
},
[ALC271_FIXUP_HP_GATE_MIC_JACK] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda - Fix Acer Aspire models with analog mics. The Acer Aspire AO756 has an analog built-in mic on nid 0x1b and an external mic on nid 0x19. The BIOS doesn't set this up. The mic detect on this Acer Aspire netbook and Acer C7 ChromeBook is only valid when the headphone is plugged. The detect circuit relies on the tip detect switch being closed on the jack. Tell hda_jack to ignore the mic sense unless the headphones are plugged. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-18 22:56:40 -08:00
.v.func = alc271_hp_gate_mic_jack,
.chained = true,
.chain_id = ALC271_FIXUP_AMIC_MIC2,
},
ALSA: hda - Add more ALC662/663 codec support - Add support for ECS (1019:9087) - Delete G71V record from alc662_cfg_tbl[] The PCI SubsystemID was the same with M70V - Add more ASUS notebook support Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-26 14:03:29 +02:00
};
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
ALSA: hda - Add inverted mic quirks for Asus U41SV, Acer 1810TZ and AOD260 These machines have inverted phase on right channel for their internal mics. BugLink: https://bugs.launchpad.net/bugs/997227 BugLink: https://bugs.launchpad.net/bugs/996611 BugLink: https://bugs.launchpad.net/bugs/1006089 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-22 19:12:10 +02:00
SND_PCI_QUIRK(0x1025, 0x029b, "Acer 1810TZ", ALC269_FIXUP_INV_DMIC),
SND_PCI_QUIRK(0x1025, 0x0349, "Acer AOD260", ALC269_FIXUP_INV_DMIC),
ALSA: hda/realtek - Generic mute LED implementation for HP laptops As David Henningsson recently suggested, some HP laptops use an unused mic pin for controlling a mute LED, and this information is provided via DMI string "HP_Mute_LED_X_Y" string. This patch adds the generic support for such cases, as we've already done in patch_sigmatel.c. This is applied generically to all devices with ID 0x103c. But as we don't know whether the device 103c:1586 really contains HP_Mute_LED_X_Y DMI string, still keep the static setup for this device using the mic2 pin 0x19. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:33:58 +01:00
SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2),
ALSA: hda - add quirks for mute LED on two HP machines These two machines have no mute LED string in BIOS. BugLink: https://bugs.launchpad.net/bugs/1128934 Tested-by: Tammy Yang <tammy.yang@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-18 11:41:55 +01:00
SND_PCI_QUIRK(0x103c, 0x1973, "HP Pavilion", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x1983, "HP Pavilion", ALC269_FIXUP_HP_MUTE_LED_MIC1),
ALSA: hda/realtek - Generic mute LED implementation for HP laptops As David Henningsson recently suggested, some HP laptops use an unused mic pin for controlling a mute LED, and this information is provided via DMI string "HP_Mute_LED_X_Y" string. This patch adds the generic support for such cases, as we've already done in patch_sigmatel.c. This is applied generically to all devices with ID 0x103c. But as we don't know whether the device 103c:1586 really contains HP_Mute_LED_X_Y DMI string, still keep the static setup for this device using the mic2 pin 0x19. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:33:58 +01:00
SND_PCI_QUIRK_VENDOR(0x103c, "HP", ALC269_FIXUP_HP_MUTE_LED),
ALSA: HDA: Add external mic quirk for Asus Zenbook UX31E According to the reporter, external mic starts to work if the laptop-dmic model is used. According to BIOS pin config, all pins are consistent with the alc269vb_laptop_dmic fixup, except for the external mic, which is not present. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/950490 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-20 10:01:46 +02:00
SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_DMIC),
ALSA: hda - Add external mic quirk for Asus Zenbook UX31A Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-21 17:44:58 +02:00
SND_PCI_QUIRK(0x1043, 0x1517, "Asus Zenbook UX31A", ALC269VB_FIXUP_DMIC),
ALSA: hda - Implement 44kHz workaround for IdeadPad as fixup Instead of checking the model quirk, use a fixup table for workaround of 44kHz-fixed PCM for Lenovo IdeaPad with ALC269. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-09 14:42:25 +02:00
SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW),
ALSA: hda - Add inverted mic quirks for Asus U41SV, Acer 1810TZ and AOD260 These machines have inverted phase on right channel for their internal mics. BugLink: https://bugs.launchpad.net/bugs/997227 BugLink: https://bugs.launchpad.net/bugs/996611 BugLink: https://bugs.launchpad.net/bugs/1006089 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-22 19:12:10 +02:00
SND_PCI_QUIRK(0x1043, 0x1b13, "Asus U41SV", ALC269_FIXUP_INV_DMIC),
ALSA: hda - Fix digital-mic mono recording on ASUS Eee PC The digital-mic unit on ASUS Eee PC gives PDM signals instead of the normal stereo PCM, thus you can't record a mono stream from the stereo stream as is; the summed stereo signal results in almost zero level, and you'll hear only soft noise. As a workaround, use ALC269-specific COEF to manipulate the dmic route for mono, like used for ALC271x. This is implemented as a fix-up, thus it works only with model=auto or without REALTEK_QUIRKS Kconfig. Reported-and-tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-03 07:48:37 +02:00
SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x1043, 0x831a, "ASUS P901", ALC269_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x1043, 0x834a, "ASUS S101", ALC269_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x1043, 0x8398, "ASUS P1005", ALC269_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x1043, 0x83ce, "ASUS P1005", ALC269_FIXUP_STEREO_DMIC),
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
SND_PCI_QUIRK(0x104d, 0x9073, "Sony VAIO", ALC275_FIXUP_SONY_VAIO_GPIO2),
SND_PCI_QUIRK(0x104d, 0x907b, "Sony VAIO", ALC275_FIXUP_SONY_HWEQ),
SND_PCI_QUIRK(0x104d, 0x9084, "Sony VAIO", ALC275_FIXUP_SONY_HWEQ),
SND_PCI_QUIRK_VENDOR(0x104d, "Sony VAIO", ALC269_FIXUP_SONY_VAIO),
SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z),
ALSA: hda - Add fixup for Acer AO725 laptop Acer AO725 needs the same fixup as AO756. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52181 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-19 12:17:54 +01:00
SND_PCI_QUIRK(0x1025, 0x0740, "Acer AO725", ALC271_FIXUP_HP_GATE_MIC_JACK),
ALSA: hda - Fix Acer Aspire models with analog mics. The Acer Aspire AO756 has an analog built-in mic on nid 0x1b and an external mic on nid 0x19. The BIOS doesn't set this up. The mic detect on this Acer Aspire netbook and Acer C7 ChromeBook is only valid when the headphone is plugged. The detect circuit relies on the tip detect switch being closed on the jack. Tell hda_jack to ignore the mic sense unless the headphones are plugged. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-18 22:56:40 -08:00
SND_PCI_QUIRK(0x1025, 0x0742, "Acer AO756", ALC271_FIXUP_HP_GATE_MIC_JACK),
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
SND_PCI_QUIRK_VENDOR(0x1025, "Acer Aspire", ALC271_FIXUP_DMIC),
ALSA: hda - Replace ALC269 quanta and lifebook models with fixups Implement new fixup entries for Quanta FL1 and Fujitsu Lifebook specific COEF and pin configurations. Removed the model entries from alc269_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-16 15:08:49 +02:00
SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook", ALC269_FIXUP_LIFEBOOK),
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
SND_PCI_QUIRK(0x17aa, 0x20f2, "Thinkpad SL410/510", ALC269_FIXUP_SKU_IGNORE),
SND_PCI_QUIRK(0x17aa, 0x215e, "Thinkpad L512", ALC269_FIXUP_SKU_IGNORE),
SND_PCI_QUIRK(0x17aa, 0x21b8, "Thinkpad Edge 14", ALC269_FIXUP_SKU_IGNORE),
SND_PCI_QUIRK(0x17aa, 0x21ca, "Thinkpad L412", ALC269_FIXUP_SKU_IGNORE),
SND_PCI_QUIRK(0x17aa, 0x21e9, "Thinkpad Edge 15", ALC269_FIXUP_SKU_IGNORE),
ALSA: hda - Support dock on Lenovo Thinkpad T530 with ALC269VC Lenovo Thinkpad T530 with ALC269VC codec has a dock port but BIOS doesn't set up the pins properly. Enable the pins as well as on Thinkpad X230 Tablet. Reported-and-tested-by: Mario <anyc@hadiko.de> Cc: <stable@vger.kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-02 09:04:39 +02:00
SND_PCI_QUIRK(0x17aa, 0x21f6, "Thinkpad T530", ALC269_FIXUP_LENOVO_DOCK),
ALSA: hda - add dock support for Thinkpad X230 As with the ThinkPad Models X230 Tablet and T530 the X230 needs a qurik to correctly set up the pins for the dock port. Signed-off-by: Felix Kaechele <felix@fetzig.org> Cc: <stable@vger.kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-06 23:02:01 +02:00
SND_PCI_QUIRK(0x17aa, 0x21fa, "Thinkpad X230", ALC269_FIXUP_LENOVO_DOCK),
ALSA: hda - add dock support for Thinkpad T430 I have a Lenovo ThinkPad T430 and an UltraBase Series 3 docking station. Without this patch, if I plug my headphones into the jack on the computer, everything works fine. The computer speakers mute and the audio is played in the headphones. However, if I plug into the docking station headphone jack the computer speakers are muted but there is no audio in the headphones. Addresses https://bugs.launchpad.net/bugs/1060372 Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-19 22:46:00 +02:00
SND_PCI_QUIRK(0x17aa, 0x21f3, "Thinkpad T430", ALC269_FIXUP_LENOVO_DOCK),
ALSA: hda - add dock support for Thinkpad T430s Add a model/fixup string "lenovo-dock", for Thinkpad T430s, to allow sound in docking station. Tested on Lenovo T430s with ThinkPad Mini Dock Plus Series 3 Cc: stable@kernel.org Signed-off-by: Philipp A. Mohrenweiser <phiamo@googlemail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-06 13:14:18 +02:00
SND_PCI_QUIRK(0x17aa, 0x21fb, "Thinkpad T430s", ALC269_FIXUP_LENOVO_DOCK),
ALSA: hda - add dock support for Thinkpad X230 Tablet Also add a model/fixup string "lenovo-dock", so that other Thinkpad users will be able to test this fixup easily, to see if it enables dock I/O for them as well. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/1026953 Tested-by: John McCarron <john.mccarron@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-20 10:37:25 +02:00
SND_PCI_QUIRK(0x17aa, 0x2203, "Thinkpad X230 Tablet", ALC269_FIXUP_LENOVO_DOCK),
ALSA: hda - Fix double quirk for Quanta FL1 / Lenovo Ideapad The same ID is twice in the quirk table, so the second one is not used. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Cc: <stable@vger.kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-08 08:43:37 +02:00
SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_PCM_44K),
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
SND_PCI_QUIRK(0x17aa, 0x9e54, "LENOVO NB", ALC269_FIXUP_LENOVO_EAPD),
ALSA: hda - Rewrite ALC269 laptop-amic,dmic,&co quirks with fixups Similarly like ALC662 asus-mode* models, rewrite the laptop-amic and dmic models with the static pin-config tables. Now we can get rid of all alc269_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:40:12 +02:00
ALSA: hda/realtek - Disable static fixups for ASUS with ALC269 We've enabled the static fixups for ASUS machines with ALC269 codec, just for making things compatible during the transition to the auto- parser. However, it seems that the static configurations do more harmful than good, as some of entries don't match with the actual hardware setups. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16 13:03:18 +01:00
#if 0
ALSA: hda - Rewrite ALC269 laptop-amic,dmic,&co quirks with fixups Similarly like ALC662 asus-mode* models, rewrite the laptop-amic and dmic models with the static pin-config tables. Now we can get rid of all alc269_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:40:12 +02:00
/* Below is a quirk table taken from the old code.
* Basically the device should work as is without the fixup table.
* If BIOS doesn't give a proper info, enable the corresponding
* fixup entry.
ALSA: hda/realtek - Fix mem leak (and rid us of trailing whitespace). In sound/pci/hda/patch_realtek.c::alc_auto_fill_dac_nids(), in the 'for (;;)' loop, if the 'badness' value returned from fill_and_eval_dacs() is negative, then we'll return from the function without freeing the memory we allocated for 'best_cfg', thus leaking. Fix the leak by kfree()'ing the memory when badness is negative. While I was there I also noticed some trailing whitespace in the function that I removed (along with all other trailing whitespace in the file) - it didn't seem worth-while to do that as two patches, so I hope it's OK that I just did it all as one patch. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-12 22:11:25 +02:00
*/
ALSA: hda - Rewrite ALC269 laptop-amic,dmic,&co quirks with fixups Similarly like ALC662 asus-mode* models, rewrite the laptop-amic and dmic models with the static pin-config tables. Now we can get rid of all alc269_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:40:12 +02:00
SND_PCI_QUIRK(0x1043, 0x8330, "ASUS Eeepc P703 P900A",
ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1013, "ASUS N61Da", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1143, "ASUS B53f", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1133, "ASUS UJ20ft", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1183, "ASUS K72DR", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x11b3, "ASUS K52DR", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x11e3, "ASUS U33Jc", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1273, "ASUS UL80Jt", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1283, "ASUS U53Jc", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x12b3, "ASUS N82JV", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x12d3, "ASUS N61Jv", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x13a3, "ASUS UL30Vt", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1373, "ASUS G73JX", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1383, "ASUS UJ30Jc", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x13d3, "ASUS N61JA", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1413, "ASUS UL50", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1443, "ASUS UL30", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1453, "ASUS M60Jv", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1483, "ASUS UL80", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x14f3, "ASUS F83Vf", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x14e3, "ASUS UL20", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1513, "ASUS UX30", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1593, "ASUS N51Vn", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x15a3, "ASUS N60Jv", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x15b3, "ASUS N60Dp", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x15c3, "ASUS N70De", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x15e3, "ASUS F83T", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1643, "ASUS M60J", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1653, "ASUS U50", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1693, "ASUS F50N", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x16a3, "ASUS F5Q", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1723, "ASUS P80", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1743, "ASUS U80", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1773, "ASUS U20A", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1883, "ASUS F81Se", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x152d, 0x1778, "Quanta ON1", ALC269_FIXUP_DMIC),
SND_PCI_QUIRK(0x17aa, 0x3be9, "Quanta Wistron", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x17ff, 0x059a, "Quanta EL3", ALC269_FIXUP_DMIC),
SND_PCI_QUIRK(0x17ff, 0x059b, "Quanta JR1", ALC269_FIXUP_DMIC),
#endif
{}
};
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
static const struct hda_model_fixup alc269_fixup_models[] = {
ALSA: hda - Rewrite ALC269 laptop-amic,dmic,&co quirks with fixups Similarly like ALC662 asus-mode* models, rewrite the laptop-amic and dmic models with the static pin-config tables. Now we can get rid of all alc269_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:40:12 +02:00
{.id = ALC269_FIXUP_AMIC, .name = "laptop-amic"},
{.id = ALC269_FIXUP_DMIC, .name = "laptop-dmic"},
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
{.id = ALC269_FIXUP_STEREO_DMIC, .name = "alc269-dmic"},
{.id = ALC271_FIXUP_DMIC, .name = "alc271-dmic"},
{.id = ALC269_FIXUP_INV_DMIC, .name = "inv-dmic"},
ALSA: hda - add dock support for Thinkpad X230 Tablet Also add a model/fixup string "lenovo-dock", so that other Thinkpad users will be able to test this fixup easily, to see if it enables dock I/O for them as well. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/1026953 Tested-by: John McCarron <john.mccarron@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-20 10:37:25 +02:00
{.id = ALC269_FIXUP_LENOVO_DOCK, .name = "lenovo-dock"},
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{}
[ALSA] hda - Add ALC663 support Added the support of ALC663 codec, including specific models for ASUS M51VA, ASUS G71V, ASUS H13 and ASUS G50V. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27 12:05:31 +02:00
};
ALSA: hda/realtek - Reuse init_hook for ALC269VB coef setup Move the currently unused spec->init_hook at the beginning of the init sequence so that the recently added ALC269VB coef setup can be put there. The alc_init() is again clean without an ugly check. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-07 08:37:19 +01:00
static void alc269_fill_coef(struct hda_codec *codec)
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{
ALSA: hda/realtek - Apply the coef-setup only to ALC269VB The coef setup in alc269_fill_coef() was designed only for ALC269VB model, and this has some bad effects for other ALC269 variants, such as turning off the external mic input. Apply it only to ALC269VB. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-07 08:25:20 +01:00
struct alc_spec *spec = codec->spec;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
int val;
ALSA: hda - More ALC663 fixes and support of compatible chips 1. Add more ASUS NB model. 2. Fixed alc663_m51va_setup M51VA has Digital Mic that NID is 0x12. The record source index is 0x9 for ALC663. So, to modify the alc663_m51va_setup function to index 0x9 and add analog Mic aupport function alc663_mode1_setup. 3. Add ASUS mode7 and mode8 modules for ALC663 Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-17 12:23:00 +01:00
ALSA: hda/realtek - Apply the coef-setup only to ALC269VB The coef setup in alc269_fill_coef() was designed only for ALC269VB model, and this has some bad effects for other ALC269 variants, such as turning off the external mic input. Apply it only to ALC269VB. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-07 08:25:20 +01:00
if (spec->codec_variant != ALC269_TYPE_ALC269VB)
ALSA: hda/realtek - Reuse init_hook for ALC269VB coef setup Move the currently unused spec->init_hook at the beginning of the init sequence so that the recently added ALC269VB coef setup can be put there. The alc_init() is again clean without an ugly check. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-07 08:37:19 +01:00
return;
ALSA: hda/realtek - Apply the coef-setup only to ALC269VB The coef setup in alc269_fill_coef() was designed only for ALC269VB model, and this has some bad effects for other ALC269 variants, such as turning off the external mic input. Apply it only to ALC269VB. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-07 08:25:20 +01:00
ALSA: hda/realtek - Cache COEF 0 value The COEF #0 value represents a sort of device id, so it's supposedly constant while operation. Better to use the cached value instead of reading it at each time from the performance POV. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:50:59 +02:00
if ((alc_get_coef0(codec) & 0x00ff) < 0x015) {
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
alc_write_coef_idx(codec, 0xf, 0x960b);
alc_write_coef_idx(codec, 0xe, 0x8817);
}
ALSA: hda - More ALC663 fixes and support of compatible chips 1. Add more ASUS NB model. 2. Fixed alc663_m51va_setup M51VA has Digital Mic that NID is 0x12. The record source index is 0x9 for ALC663. So, to modify the alc663_m51va_setup function to index 0x9 and add analog Mic aupport function alc663_mode1_setup. 3. Add ASUS mode7 and mode8 modules for ALC663 Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-17 12:23:00 +01:00
ALSA: hda/realtek - Cache COEF 0 value The COEF #0 value represents a sort of device id, so it's supposedly constant while operation. Better to use the cached value instead of reading it at each time from the performance POV. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:50:59 +02:00
if ((alc_get_coef0(codec) & 0x00ff) == 0x016) {
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
alc_write_coef_idx(codec, 0xf, 0x960b);
alc_write_coef_idx(codec, 0xe, 0x8814);
}
ALSA: hda - More ALC663 fixes and support of compatible chips 1. Add more ASUS NB model. 2. Fixed alc663_m51va_setup M51VA has Digital Mic that NID is 0x12. The record source index is 0x9 for ALC663. So, to modify the alc663_m51va_setup function to index 0x9 and add analog Mic aupport function alc663_mode1_setup. 3. Add ASUS mode7 and mode8 modules for ALC663 Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-17 12:23:00 +01:00
ALSA: hda/realtek - Cache COEF 0 value The COEF #0 value represents a sort of device id, so it's supposedly constant while operation. Better to use the cached value instead of reading it at each time from the performance POV. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:50:59 +02:00
if ((alc_get_coef0(codec) & 0x00ff) == 0x017) {
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
val = alc_read_coef_idx(codec, 0x04);
/* Power up output pin */
alc_write_coef_idx(codec, 0x04, val | (1<<11));
}
ALSA: hda - More ALC663 fixes and support of compatible chips 1. Add more ASUS NB model. 2. Fixed alc663_m51va_setup M51VA has Digital Mic that NID is 0x12. The record source index is 0x9 for ALC663. So, to modify the alc663_m51va_setup function to index 0x9 and add analog Mic aupport function alc663_mode1_setup. 3. Add ASUS mode7 and mode8 modules for ALC663 Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-17 12:23:00 +01:00
ALSA: hda/realtek - Cache COEF 0 value The COEF #0 value represents a sort of device id, so it's supposedly constant while operation. Better to use the cached value instead of reading it at each time from the performance POV. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:50:59 +02:00
if ((alc_get_coef0(codec) & 0x00ff) == 0x018) {
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
val = alc_read_coef_idx(codec, 0xd);
if ((val & 0x0c00) >> 10 != 0x1) {
/* Capless ramp up clock control */
alc_write_coef_idx(codec, 0xd, val | (1<<10));
}
val = alc_read_coef_idx(codec, 0x17);
if ((val & 0x01c0) >> 6 != 0x4) {
/* Class D power on reset */
alc_write_coef_idx(codec, 0x17, val | (1<<7));
}
}
ALSA: hda - More ALC663 fixes and support of compatible chips 1. Add more ASUS NB model. 2. Fixed alc663_m51va_setup M51VA has Digital Mic that NID is 0x12. The record source index is 0x9 for ALC663. So, to modify the alc663_m51va_setup function to index 0x9 and add analog Mic aupport function alc663_mode1_setup. 3. Add ASUS mode7 and mode8 modules for ALC663 Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-17 12:23:00 +01:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
val = alc_read_coef_idx(codec, 0xd); /* Class D */
alc_write_coef_idx(codec, 0xd, val | (1<<14));
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
val = alc_read_coef_idx(codec, 0x4); /* HP */
alc_write_coef_idx(codec, 0x4, val | (1<<11));
}
ALSA: hda - Split EAPD init to a separate array from alc662_init_verbs So far, alc662_init_verbs[] is used for all ALC662-compatible chips, but the EAPD controls for 0x15 in there is invalid for ALC892. Also, since EAPDs should be set up in alc_auto_init_amp(), these static elements aren't needed for auto-parser, too. In this patch, the EAPD init verbs are split from alc662_init_verbs, and applied only to static quirks. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-07 10:24:23 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/*
*/
static int patch_alc269(struct hda_codec *codec)
{
struct alc_spec *spec;
ALSA: hda/realtek - Call a common helper for alc_spec initialization Just a clean up by calling the same helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 18:03:15 +02:00
int err;
ALSA: hda - Add more ALC662/663 codec support - Add support for ECS (1019:9087) - Delete G71V record from alc662_cfg_tbl[] The PCI SubsystemID was the same with M70V - Add more ASUS notebook support Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-26 14:03:29 +02:00
ALSA: hda/realtek - Call a common helper for alc_spec initialization Just a clean up by calling the same helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 18:03:15 +02:00
err = alc_alloc_spec(codec, 0x0b);
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
if (err < 0)
ALSA: hda/realtek - Call a common helper for alc_spec initialization Just a clean up by calling the same helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 18:03:15 +02:00
return err;
spec = codec->spec;
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
spec->gen.shared_mic_vref_pin = 0x18;
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_pick_fixup(codec, alc269_fixup_models,
ALSA: hda/realtek - Fix detection of ALC271X codec In commit af741c1 ("ALSA: hda/realtek - Call alc_auto_parse_customize_define() always after fixup"), alc_auto_parse_customize_define was moved after detection of ALC271X. The problem is that detection of ALC271X relies on spec->cdefine.platform_type, and it's set on alc_auto_parse_customize_define. Move the alc_auto_parse_customize_define and its required fixup setup before the block doing the ALC271X and other codec setup. BugLink: https://bugs.launchpad.net/bugs/1006690 Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Reviewed-by: David Henningsson <david.henningsson@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-27 10:38:14 -03:00
alc269_fixup_tbl, alc269_fixups);
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
ALSA: hda/realtek - Fix detection of ALC271X codec In commit af741c1 ("ALSA: hda/realtek - Call alc_auto_parse_customize_define() always after fixup"), alc_auto_parse_customize_define was moved after detection of ALC271X. The problem is that detection of ALC271X relies on spec->cdefine.platform_type, and it's set on alc_auto_parse_customize_define. Move the alc_auto_parse_customize_define and its required fixup setup before the block doing the ALC271X and other codec setup. BugLink: https://bugs.launchpad.net/bugs/1006690 Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Reviewed-by: David Henningsson <david.henningsson@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-27 10:38:14 -03:00
alc_auto_parse_customize_define(codec);
ALSA: hda - Add support of new codec ALC284 Added the support for a new codec ALC284, which is compatible with ALC269. Also add more codec variants to handle the SSID check properly. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 10:25:48 +01:00
switch (codec->vendor_id) {
case 0x10ec0269:
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
spec->codec_variant = ALC269_TYPE_ALC269VA;
ALSA: hda/realtek - Cache COEF 0 value The COEF #0 value represents a sort of device id, so it's supposedly constant while operation. Better to use the cached value instead of reading it at each time from the performance POV. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:50:59 +02:00
switch (alc_get_coef0(codec) & 0x00f0) {
case 0x0010:
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
if (codec->bus->pci->subsystem_vendor == 0x1025 &&
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
spec->cdefine.platform_type == 1)
ALSA: hda/realtek - Check the error from alc_codec_rename() Should be a rare case, but... Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:00:35 +02:00
err = alc_codec_rename(codec, "ALC271X");
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
spec->codec_variant = ALC269_TYPE_ALC269VB;
ALSA: hda/realtek - Cache COEF 0 value The COEF #0 value represents a sort of device id, so it's supposedly constant while operation. Better to use the cached value instead of reading it at each time from the performance POV. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:50:59 +02:00
break;
case 0x0020:
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
if (codec->bus->pci->subsystem_vendor == 0x17aa &&
codec->bus->pci->subsystem_device == 0x21f3)
ALSA: hda/realtek - Check the error from alc_codec_rename() Should be a rare case, but... Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:00:35 +02:00
err = alc_codec_rename(codec, "ALC3202");
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
spec->codec_variant = ALC269_TYPE_ALC269VC;
ALSA: hda/realtek - Cache COEF 0 value The COEF #0 value represents a sort of device id, so it's supposedly constant while operation. Better to use the cached value instead of reading it at each time from the performance POV. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:50:59 +02:00
break;
ALSA: hda/realtek - Add new codec support for ALC269VD Also fix some settings applied only for ALC269VB. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-25 08:08:38 +02:00
case 0x0030:
spec->codec_variant = ALC269_TYPE_ALC269VD;
break;
ALSA: hda/realtek - Cache COEF 0 value The COEF #0 value represents a sort of device id, so it's supposedly constant while operation. Better to use the cached value instead of reading it at each time from the performance POV. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:50:59 +02:00
default:
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
alc_fix_pll_init(codec, 0x20, 0x04, 15);
ALSA: hda/realtek - Cache COEF 0 value The COEF #0 value represents a sort of device id, so it's supposedly constant while operation. Better to use the cached value instead of reading it at each time from the performance POV. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:50:59 +02:00
}
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
if (err < 0)
goto error;
ALSA: hda/realtek - Reuse init_hook for ALC269VB coef setup Move the currently unused spec->init_hook at the beginning of the init sequence so that the recently added ALC269VB coef setup can be put there. The alc_init() is again clean without an ugly check. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-07 08:37:19 +01:00
spec->init_hook = alc269_fill_coef;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
alc269_fill_coef(codec);
ALSA: hda - Add support of new codec ALC284 Added the support for a new codec ALC284, which is compatible with ALC269. Also add more codec variants to handle the SSID check properly. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 10:25:48 +01:00
break;
case 0x10ec0280:
case 0x10ec0290:
spec->codec_variant = ALC269_TYPE_ALC280;
break;
case 0x10ec0282:
case 0x10ec0283:
spec->codec_variant = ALC269_TYPE_ALC282;
break;
case 0x10ec0284:
case 0x10ec0292:
spec->codec_variant = ALC269_TYPE_ALC284;
break;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
}
[ALSA] hda - Add ALC663 support Added the support of ALC663 codec, including specific models for ASUS M51VA, ASUS G71V, ASUS H13 and ASUS G50V. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27 12:05:31 +02:00
ALSA: hda - Rewrite ALC269 laptop-amic,dmic,&co quirks with fixups Similarly like ALC662 asus-mode* models, rewrite the laptop-amic and dmic models with the static pin-config tables. Now we can get rid of all alc269_quirks.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:40:12 +02:00
/* automatic parse from the BIOS config */
err = alc269_parse_auto_config(codec);
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
if (err < 0)
goto error;
[ALSA] hda - Add ALC663 support Added the support of ALC663 codec, including specific models for ASUS M51VA, ASUS G71V, ASUS H13 and ASUS G50V. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27 12:05:31 +02:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
if (!spec->gen.no_analog && has_cdefine_beep(codec)) {
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
err = snd_hda_attach_beep_device(codec, 0x1);
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
if (err < 0)
goto error;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
set_beep_amp(spec, 0x0b, 0x04, HDA_INPUT);
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
}
ALSA: hda - Add more ALC662/663 codec support - Add support for ECS (1019:9087) - Delete G71V record from alc662_cfg_tbl[] The PCI SubsystemID was the same with M70V - Add more ASUS notebook support Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-26 14:03:29 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
codec->patch_ops = alc_patch_ops;
ALSA: hda - Make CONFIG_SND_HDA_POWER_SAVE depending on CONFIG_PM It makes little sense to enable power-saving without PM. This removes SND_HDA_NEEDS_RESUME define so that we can use CONFIG_PM in all places. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-26 09:52:50 +02:00
#ifdef CONFIG_PM
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
codec->patch_ops.resume = alc269_resume;
#endif
spec->shutup = alc269_shutup;
ALSA: hda - More ALC663 fixes and support of compatible chips 1. Add more ASUS NB model. 2. Fixed alc663_m51va_setup M51VA has Digital Mic that NID is 0x12. The record source index is 0x9 for ALC663. So, to modify the alc663_m51va_setup function to index 0x9 and add analog Mic aupport function alc663_mode1_setup. 3. Add ASUS mode7 and mode8 modules for ALC663 Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-17 12:23:00 +01:00
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE);
ALSA: hda/realtek - Apply probe-fixup really after probing Move the call of alc_apply_fixup() with ALC_FIXUP_ACT_PROBE after the whole setups of patch_ops & co, so that the fix-up function may override the default setup. This will be needed for installing the own unsol event handler (e.g. for volume-knob controls). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 15:47:55 +01:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
return 0;
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
error:
alc_free(codec);
return err;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
}
ALSA: hda - Add more ALC662/663 codec support - Add support for ECS (1019:9087) - Delete G71V record from alc662_cfg_tbl[] The PCI SubsystemID was the same with M70V - Add more ASUS notebook support Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-26 14:03:29 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/*
* ALC861
*/
ALSA: hda - Add quirks for Realtek codecs - Support ASUS F81Se F5Q P80 U20A U80 U50 UX50 for ALC269 - Support ASUS F70SL UX20 X58LE F50Z N80Vc N81Te N505Tp Vx3V N5051A for ALC663 - Support DELL ZM1 for ALC272 Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-21 07:39:04 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
static int alc861_parse_auto_config(struct hda_codec *codec)
[ALSA] hda - Add ALC663 support Added the support of ALC663 codec, including specific models for ASUS M51VA, ASUS G71V, ASUS H13 and ASUS G50V. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27 12:05:31 +02:00
{
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
static const hda_nid_t alc861_ignore[] = { 0x1d, 0 };
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
static const hda_nid_t alc861_ssids[] = { 0x0e, 0x0f, 0x0b, 0 };
return alc_parse_auto_config(codec, alc861_ignore, alc861_ssids);
ALSA: hda - Minor update for alc662-parser functions Allow alc662_dac_to_mix() and alc662_look_for_dac() to parse down the selector widget that is found in ALC880-type codecs, and rename them to alc_auto_*() accordingly. This is for the next coming multi-io extensions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-27 15:14:23 +02:00
}
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/* Pin config fixes */
enum {
ALSA: hda - Suppress auto-mute feature on some machines with ALC861 A few machines with ALC861 & co are reported not to work properly with the auto-mute feature in software. The auto-mute feature is implemented in the hardware level, and the jack-detection never works with them. Also, rename the fixup index as ALC861_FIXUP_* to follow the standard. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 11:56:25 +01:00
ALC861_FIXUP_FSC_AMILO_PI1505,
ALC861_FIXUP_AMP_VREF_0F,
ALC861_FIXUP_NO_JACK_DETECT,
ALC861_FIXUP_ASUS_A6RP,
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
};
ALSA: hda - Fix / improve ALC66x parser The auto-parser for ALC662/663/272 codecs doesn't work properly when a speaker is connected to mono NID 0x17, and doesn't handle the dynamic DAC assignment properly. This patch fixes the issues and also improves the assignment of DACs so that HP and speakers can have independent volume controls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-02 09:03:58 +02:00
ALSA: hda - Apply 0x0f-VREF fix to all ASUS laptops with ALC861/660 It turned out that other ASUS laptops require the similar fix to enable the VREF on the pin 0x0f for the secret output amp, not only ASUS A6Rp. Moreover, it's required even when the pin is being used as the output. Thus, writing a fixed value doesn't work always. This patch applies the VREF-fix for all ASUS laptops with ALC861/660 in a fixup function that checks the current value and turns on only the VREF value no matter whether input or output direction is set. The automute function is modified as well to keep the pin VREF upon muting/unmuting via pin-control; otherwise the pin VREF is reset at plugging/unplugging a jack. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42588 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-30 10:54:08 +01:00
/* On some laptops, VREF of pin 0x0f is abused for controlling the main amp */
static void alc861_fixup_asus_amp_vref_0f(struct hda_codec *codec,
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
const struct hda_fixup *fix, int action)
ALSA: hda - Apply 0x0f-VREF fix to all ASUS laptops with ALC861/660 It turned out that other ASUS laptops require the similar fix to enable the VREF on the pin 0x0f for the secret output amp, not only ASUS A6Rp. Moreover, it's required even when the pin is being used as the output. Thus, writing a fixed value doesn't work always. This patch applies the VREF-fix for all ASUS laptops with ALC861/660 in a fixup function that checks the current value and turns on only the VREF value no matter whether input or output direction is set. The automute function is modified as well to keep the pin VREF upon muting/unmuting via pin-control; otherwise the pin VREF is reset at plugging/unplugging a jack. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42588 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-30 10:54:08 +01:00
{
struct alc_spec *spec = codec->spec;
unsigned int val;
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
if (action != HDA_FIXUP_ACT_INIT)
ALSA: hda - Apply 0x0f-VREF fix to all ASUS laptops with ALC861/660 It turned out that other ASUS laptops require the similar fix to enable the VREF on the pin 0x0f for the secret output amp, not only ASUS A6Rp. Moreover, it's required even when the pin is being used as the output. Thus, writing a fixed value doesn't work always. This patch applies the VREF-fix for all ASUS laptops with ALC861/660 in a fixup function that checks the current value and turns on only the VREF value no matter whether input or output direction is set. The automute function is modified as well to keep the pin VREF upon muting/unmuting via pin-control; otherwise the pin VREF is reset at plugging/unplugging a jack. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42588 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-30 10:54:08 +01:00
return;
ALSA: hda/realtek - Read the cached pinctl value in fixups ... instead of reading the value from the codec at each time. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 10:12:22 +01:00
val = snd_hda_codec_get_pin_target(codec, 0x0f);
ALSA: hda - Apply 0x0f-VREF fix to all ASUS laptops with ALC861/660 It turned out that other ASUS laptops require the similar fix to enable the VREF on the pin 0x0f for the secret output amp, not only ASUS A6Rp. Moreover, it's required even when the pin is being used as the output. Thus, writing a fixed value doesn't work always. This patch applies the VREF-fix for all ASUS laptops with ALC861/660 in a fixup function that checks the current value and turns on only the VREF value no matter whether input or output direction is set. The automute function is modified as well to keep the pin VREF upon muting/unmuting via pin-control; otherwise the pin VREF is reset at plugging/unplugging a jack. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42588 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-30 10:54:08 +01:00
if (!(val & (AC_PINCTL_IN_EN | AC_PINCTL_OUT_EN)))
val |= AC_PINCTL_IN_EN;
val |= AC_PINCTL_VREF_50;
ALSA: hda - Introduce snd_hda_set_pin_ctl*() helper functions For setting the pin-control values more safely to match with the actual pin capability bits, a copule of new helper functions, snd_hda_set_pin_ctl() and snd_hda_set_pin_ctl_cache(), are introduced. These are simple replacement of the codec verb write with AC_VERB_SET_PIN_WIDGET but do more sanity checks and filter out superfluous pin-control bits if they don't fit with the corresponding pin capabilities. Some codecs are screwed up or ignore the command when such a wrong bit is set. These helpers will avoid such secret errors. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-20 12:34:50 +02:00
snd_hda_set_pin_ctl(codec, 0x0f, val);
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
spec->gen.keep_vref_in_automute = 1;
ALSA: hda - Apply 0x0f-VREF fix to all ASUS laptops with ALC861/660 It turned out that other ASUS laptops require the similar fix to enable the VREF on the pin 0x0f for the secret output amp, not only ASUS A6Rp. Moreover, it's required even when the pin is being used as the output. Thus, writing a fixed value doesn't work always. This patch applies the VREF-fix for all ASUS laptops with ALC861/660 in a fixup function that checks the current value and turns on only the VREF value no matter whether input or output direction is set. The automute function is modified as well to keep the pin VREF upon muting/unmuting via pin-control; otherwise the pin VREF is reset at plugging/unplugging a jack. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42588 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-30 10:54:08 +01:00
}
ALSA: hda - Suppress auto-mute feature on some machines with ALC861 A few machines with ALC861 & co are reported not to work properly with the auto-mute feature in software. The auto-mute feature is implemented in the hardware level, and the jack-detection never works with them. Also, rename the fixup index as ALC861_FIXUP_* to follow the standard. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 11:56:25 +01:00
/* suppress the jack-detection */
static void alc_fixup_no_jack_detect(struct hda_codec *codec,
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
const struct hda_fixup *fix, int action)
ALSA: hda - Suppress auto-mute feature on some machines with ALC861 A few machines with ALC861 & co are reported not to work properly with the auto-mute feature in software. The auto-mute feature is implemented in the hardware level, and the jack-detection never works with them. Also, rename the fixup index as ALC861_FIXUP_* to follow the standard. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 11:56:25 +01:00
{
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
if (action == HDA_FIXUP_ACT_PRE_PROBE)
ALSA: hda - Suppress auto-mute feature on some machines with ALC861 A few machines with ALC861 & co are reported not to work properly with the auto-mute feature in software. The auto-mute feature is implemented in the hardware level, and the jack-detection never works with them. Also, rename the fixup index as ALC861_FIXUP_* to follow the standard. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 11:56:25 +01:00
codec->no_jack_detect = 1;
ALSA: hda/realtek - Fix mem leak (and rid us of trailing whitespace). In sound/pci/hda/patch_realtek.c::alc_auto_fill_dac_nids(), in the 'for (;;)' loop, if the 'badness' value returned from fill_and_eval_dacs() is negative, then we'll return from the function without freeing the memory we allocated for 'best_cfg', thus leaking. Fix the leak by kfree()'ing the memory when badness is negative. While I was there I also noticed some trailing whitespace in the function that I removed (along with all other trailing whitespace in the file) - it didn't seem worth-while to do that as two patches, so I hope it's OK that I just did it all as one patch. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-12 22:11:25 +02:00
}
ALSA: hda - Suppress auto-mute feature on some machines with ALC861 A few machines with ALC861 & co are reported not to work properly with the auto-mute feature in software. The auto-mute feature is implemented in the hardware level, and the jack-detection never works with them. Also, rename the fixup index as ALC861_FIXUP_* to follow the standard. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 11:56:25 +01:00
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
static const struct hda_fixup alc861_fixups[] = {
ALSA: hda - Suppress auto-mute feature on some machines with ALC861 A few machines with ALC861 & co are reported not to work properly with the auto-mute feature in software. The auto-mute feature is implemented in the hardware level, and the jack-detection never works with them. Also, rename the fixup index as ALC861_FIXUP_* to follow the standard. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 11:56:25 +01:00
[ALC861_FIXUP_FSC_AMILO_PI1505] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{ 0x0b, 0x0221101f }, /* HP */
{ 0x0f, 0x90170310 }, /* speaker */
{ }
}
},
ALSA: hda - Suppress auto-mute feature on some machines with ALC861 A few machines with ALC861 & co are reported not to work properly with the auto-mute feature in software. The auto-mute feature is implemented in the hardware level, and the jack-detection never works with them. Also, rename the fixup index as ALC861_FIXUP_* to follow the standard. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 11:56:25 +01:00
[ALC861_FIXUP_AMP_VREF_0F] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda - Apply 0x0f-VREF fix to all ASUS laptops with ALC861/660 It turned out that other ASUS laptops require the similar fix to enable the VREF on the pin 0x0f for the secret output amp, not only ASUS A6Rp. Moreover, it's required even when the pin is being used as the output. Thus, writing a fixed value doesn't work always. This patch applies the VREF-fix for all ASUS laptops with ALC861/660 in a fixup function that checks the current value and turns on only the VREF value no matter whether input or output direction is set. The automute function is modified as well to keep the pin VREF upon muting/unmuting via pin-control; otherwise the pin VREF is reset at plugging/unplugging a jack. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42588 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-30 10:54:08 +01:00
.v.func = alc861_fixup_asus_amp_vref_0f,
ALSA: hda - Fix silent output on ASUS A6Rp The refactoring of Realtek codec driver in 3.2 kernel caused a regression for ASUS A6Rp laptop; it doesn't give any output. The reason was that this machine has a secret master mute (or EAPD) control via NID 0x0f VREF. Setting VREF50 on this node makes the sound working again. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42588 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-25 09:55:46 +01:00
},
ALSA: hda - Suppress auto-mute feature on some machines with ALC861 A few machines with ALC861 & co are reported not to work properly with the auto-mute feature in software. The auto-mute feature is implemented in the hardware level, and the jack-detection never works with them. Also, rename the fixup index as ALC861_FIXUP_* to follow the standard. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 11:56:25 +01:00
[ALC861_FIXUP_NO_JACK_DETECT] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda - Suppress auto-mute feature on some machines with ALC861 A few machines with ALC861 & co are reported not to work properly with the auto-mute feature in software. The auto-mute feature is implemented in the hardware level, and the jack-detection never works with them. Also, rename the fixup index as ALC861_FIXUP_* to follow the standard. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 11:56:25 +01:00
.v.func = alc_fixup_no_jack_detect,
},
[ALC861_FIXUP_ASUS_A6RP] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda - Suppress auto-mute feature on some machines with ALC861 A few machines with ALC861 & co are reported not to work properly with the auto-mute feature in software. The auto-mute feature is implemented in the hardware level, and the jack-detection never works with them. Also, rename the fixup index as ALC861_FIXUP_* to follow the standard. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 11:56:25 +01:00
.v.func = alc861_fixup_asus_amp_vref_0f,
.chained = true,
.chain_id = ALC861_FIXUP_NO_JACK_DETECT,
}
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
};
ALSA: hda - Fix / improve ALC66x parser The auto-parser for ALC662/663/272 codecs doesn't work properly when a speaker is connected to mono NID 0x17, and doesn't handle the dynamic DAC assignment properly. This patch fixes the issues and also improves the assignment of DACs so that HP and speakers can have independent volume controls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-02 09:03:58 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
static const struct snd_pci_quirk alc861_fixup_tbl[] = {
ALSA: hda - Suppress auto-mute feature on some machines with ALC861 A few machines with ALC861 & co are reported not to work properly with the auto-mute feature in software. The auto-mute feature is implemented in the hardware level, and the jack-detection never works with them. Also, rename the fixup index as ALC861_FIXUP_* to follow the standard. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 11:56:25 +01:00
SND_PCI_QUIRK(0x1043, 0x1393, "ASUS A6Rp", ALC861_FIXUP_ASUS_A6RP),
SND_PCI_QUIRK_VENDOR(0x1043, "ASUS laptop", ALC861_FIXUP_AMP_VREF_0F),
SND_PCI_QUIRK(0x1462, 0x7254, "HP DX2200", ALC861_FIXUP_NO_JACK_DETECT),
SND_PCI_QUIRK(0x1584, 0x2b01, "Haier W18", ALC861_FIXUP_AMP_VREF_0F),
SND_PCI_QUIRK(0x1584, 0x0000, "Uniwill ECS M31EI", ALC861_FIXUP_AMP_VREF_0F),
SND_PCI_QUIRK(0x1734, 0x10c7, "FSC Amilo Pi1505", ALC861_FIXUP_FSC_AMILO_PI1505),
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{}
};
ALSA: hda - Check hard-wired DACs at first for ALC662 & co Some Realtek codecs have the output pins hardwired with certain DACs. These DACs have to be assigned at first and assign the rest for multi-DAC pins so that all DACs can be assigned properly. Without such an optimization, speaker outputs may be assigned to the same DAC as the headphone or others. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27 12:34:01 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/*
*/
static int patch_alc861(struct hda_codec *codec)
ALSA: hda - Fix / improve ALC66x parser The auto-parser for ALC662/663/272 codecs doesn't work properly when a speaker is connected to mono NID 0x17, and doesn't handle the dynamic DAC assignment properly. This patch fixes the issues and also improves the assignment of DACs so that HP and speakers can have independent volume controls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-02 09:03:58 +02:00
{
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
struct alc_spec *spec;
int err;
ALSA: hda - Fix / improve ALC66x parser The auto-parser for ALC662/663/272 codecs doesn't work properly when a speaker is connected to mono NID 0x17, and doesn't handle the dynamic DAC assignment properly. This patch fixes the issues and also improves the assignment of DACs so that HP and speakers can have independent volume controls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-02 09:03:58 +02:00
ALSA: hda/realtek - Call a common helper for alc_spec initialization Just a clean up by calling the same helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 18:03:15 +02:00
err = alc_alloc_spec(codec, 0x15);
if (err < 0)
return err;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
ALSA: hda/realtek - Call a common helper for alc_spec initialization Just a clean up by calling the same helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 18:03:15 +02:00
spec = codec->spec;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_pick_fixup(codec, NULL, alc861_fixup_tbl, alc861_fixups);
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
ALSA: hda - Check hard-wired DACs at first for ALC662 & co Some Realtek codecs have the output pins hardwired with certain DACs. These DACs have to be assigned at first and assign the rest for multi-DAC pins so that all DACs can be assigned properly. Without such an optimization, speaker outputs may be assigned to the same DAC as the headphone or others. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27 12:34:01 +02:00
ALSA: hda - Remove all ALC861 and ALC861-VD quirks Let's remove the rest of ALC861 and ALC861-VD quirks. If any breakage is found, it can be fixed easily via the pin-config table update. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 17:34:25 +02:00
/* automatic parse from the BIOS config */
err = alc861_parse_auto_config(codec);
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
if (err < 0)
goto error;
ALSA: hda - Check hard-wired DACs at first for ALC662 & co Some Realtek codecs have the output pins hardwired with certain DACs. These DACs have to be assigned at first and assign the rest for multi-DAC pins so that all DACs can be assigned properly. Without such an optimization, speaker outputs may be assigned to the same DAC as the headphone or others. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27 12:34:01 +02:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
if (!spec->gen.no_analog) {
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
err = snd_hda_attach_beep_device(codec, 0x23);
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
if (err < 0)
goto error;
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
set_beep_amp(spec, 0x23, 0, HDA_OUTPUT);
}
ALSA: hda - Fix / improve ALC66x parser The auto-parser for ALC662/663/272 codecs doesn't work properly when a speaker is connected to mono NID 0x17, and doesn't handle the dynamic DAC assignment properly. This patch fixes the issues and also improves the assignment of DACs so that HP and speakers can have independent volume controls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-02 09:03:58 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
codec->patch_ops = alc_patch_ops;
ALSA: hda - Clean up CONFIG_SND_HDA_POWER_SAVE CONFIG_SND_HDA_POWER_SAVE is no longer an experimental feature and its behavior can be well controlled via the default value and module parameter. Let's just replace it with the standard CONFIG_PM. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-24 18:38:08 +02:00
#ifdef CONFIG_PM
ALSA: hda - Remove all ALC861 and ALC861-VD quirks Let's remove the rest of ALC861 and ALC861-VD quirks. If any breakage is found, it can be fixed easily via the pin-config table update. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 17:34:25 +02:00
spec->power_hook = alc_power_eapd;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
#endif
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE);
ALSA: hda/realtek - Apply probe-fixup really after probing Move the call of alc_apply_fixup() with ALC_FIXUP_ACT_PROBE after the whole setups of patch_ops & co, so that the fix-up function may override the default setup. This will be needed for installing the own unsol event handler (e.g. for volume-knob controls). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 15:47:55 +01:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
return 0;
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
error:
alc_free(codec);
return err;
ALSA: hda - Fix / improve ALC66x parser The auto-parser for ALC662/663/272 codecs doesn't work properly when a speaker is connected to mono NID 0x17, and doesn't handle the dynamic DAC assignment properly. This patch fixes the issues and also improves the assignment of DACs so that HP and speakers can have independent volume controls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-02 09:03:58 +02:00
}
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/*
* ALC861-VD support
*
* Based on ALC882
*
* In addition, an independent DAC
*/
static int alc861vd_parse_auto_config(struct hda_codec *codec)
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
{
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
static const hda_nid_t alc861vd_ignore[] = { 0x1d, 0 };
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
static const hda_nid_t alc861vd_ssids[] = { 0x15, 0x1b, 0x14, 0 };
return alc_parse_auto_config(codec, alc861vd_ignore, alc861vd_ssids);
ALSA: hda - Add channel-mode support to Realtek auto-parser This patch adds the support of "Channel Mode" enum control to Realtek auto-parser. When line-in or mic-in jacks are capable to output and free DACs are available, the driver allows to switch to multi-channel mode via "Channel Mode" enum switch, as already implemented in some preset cases. Not implemented in all Realtek codecs. Currently, ALC880, 882, 861, 662 and the compatible codecs are supported. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-27 16:35:23 +02:00
}
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
enum {
ALSA: hda - Restore VREF50 setup for ALC861-VD dallas/hp models During the cleanup by commit 6727b12669f255dbf65b3d63c32cce1e3e967398, the specific setups for dallas and hp models, using VREF50 for mic pins, were lost. Fixed now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 17:28:55 +02:00
ALC660VD_FIX_ASUS_GPIO1,
ALC861VD_FIX_DALLAS,
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
};
ALSA: hda - Add channel-mode support to Realtek auto-parser This patch adds the support of "Channel Mode" enum control to Realtek auto-parser. When line-in or mic-in jacks are capable to output and free DACs are available, the driver allows to switch to multi-channel mode via "Channel Mode" enum switch, as already implemented in some preset cases. Not implemented in all Realtek codecs. Currently, ALC880, 882, 861, 662 and the compatible codecs are supported. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-27 16:35:23 +02:00
ALSA: hda - Restore VREF50 setup for ALC861-VD dallas/hp models During the cleanup by commit 6727b12669f255dbf65b3d63c32cce1e3e967398, the specific setups for dallas and hp models, using VREF50 for mic pins, were lost. Fixed now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 17:28:55 +02:00
/* exclude VREF80 */
static void alc861vd_fixup_dallas(struct hda_codec *codec,
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
const struct hda_fixup *fix, int action)
ALSA: hda - Restore VREF50 setup for ALC861-VD dallas/hp models During the cleanup by commit 6727b12669f255dbf65b3d63c32cce1e3e967398, the specific setups for dallas and hp models, using VREF50 for mic pins, were lost. Fixed now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 17:28:55 +02:00
{
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
if (action == HDA_FIXUP_ACT_PRE_PROBE) {
ALSA: hda - Fix the wrong pincaps set in ALC861VD dallas/hp fixup The workaround to force VREF50 for dallas/hp model with ALC861VD was introduced in commit 8fdcb6fe4204bdb4c6991652717ab5063751414e, but it contained wrong pincap override bits. This patch fixes to exclude VREF80 pincap bit correctly. Cc: <stable@vger.kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-17 20:06:49 +01:00
snd_hda_override_pin_caps(codec, 0x18, 0x00000734);
snd_hda_override_pin_caps(codec, 0x19, 0x0000073c);
ALSA: hda - Restore VREF50 setup for ALC861-VD dallas/hp models During the cleanup by commit 6727b12669f255dbf65b3d63c32cce1e3e967398, the specific setups for dallas and hp models, using VREF50 for mic pins, were lost. Fixed now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 17:28:55 +02:00
}
}
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
static const struct hda_fixup alc861vd_fixups[] = {
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
[ALC660VD_FIX_ASUS_GPIO1] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
.v.verbs = (const struct hda_verb[]) {
ALSA: hda - Restore VREF50 setup for ALC861-VD dallas/hp models During the cleanup by commit 6727b12669f255dbf65b3d63c32cce1e3e967398, the specific setups for dallas and hp models, using VREF50 for mic pins, were lost. Fixed now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 17:28:55 +02:00
/* reset GPIO1 */
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{0x01, AC_VERB_SET_GPIO_MASK, 0x03},
{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
{0x01, AC_VERB_SET_GPIO_DATA, 0x01},
{ }
}
},
ALSA: hda - Restore VREF50 setup for ALC861-VD dallas/hp models During the cleanup by commit 6727b12669f255dbf65b3d63c32cce1e3e967398, the specific setups for dallas and hp models, using VREF50 for mic pins, were lost. Fixed now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 17:28:55 +02:00
[ALC861VD_FIX_DALLAS] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda - Restore VREF50 setup for ALC861-VD dallas/hp models During the cleanup by commit 6727b12669f255dbf65b3d63c32cce1e3e967398, the specific setups for dallas and hp models, using VREF50 for mic pins, were lost. Fixed now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 17:28:55 +02:00
.v.func = alc861vd_fixup_dallas,
},
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
};
ALSA: hda - Add channel-mode support to Realtek auto-parser This patch adds the support of "Channel Mode" enum control to Realtek auto-parser. When line-in or mic-in jacks are capable to output and free DACs are available, the driver allows to switch to multi-channel mode via "Channel Mode" enum switch, as already implemented in some preset cases. Not implemented in all Realtek codecs. Currently, ALC880, 882, 861, 662 and the compatible codecs are supported. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-27 16:35:23 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
static const struct snd_pci_quirk alc861vd_fixup_tbl[] = {
ALSA: hda - Restore VREF50 setup for ALC861-VD dallas/hp models During the cleanup by commit 6727b12669f255dbf65b3d63c32cce1e3e967398, the specific setups for dallas and hp models, using VREF50 for mic pins, were lost. Fixed now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 17:28:55 +02:00
SND_PCI_QUIRK(0x103c, 0x30bf, "HP TX1000", ALC861VD_FIX_DALLAS),
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
SND_PCI_QUIRK(0x1043, 0x1339, "ASUS A7-K", ALC660VD_FIX_ASUS_GPIO1),
ALSA: hda - Restore VREF50 setup for ALC861-VD dallas/hp models During the cleanup by commit 6727b12669f255dbf65b3d63c32cce1e3e967398, the specific setups for dallas and hp models, using VREF50 for mic pins, were lost. Fixed now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 17:28:55 +02:00
SND_PCI_QUIRK(0x1179, 0xff31, "Toshiba L30-149", ALC861VD_FIX_DALLAS),
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
{}
};
ALSA: hda - Add channel-mode support to Realtek auto-parser This patch adds the support of "Channel Mode" enum control to Realtek auto-parser. When line-in or mic-in jacks are capable to output and free DACs are available, the driver allows to switch to multi-channel mode via "Channel Mode" enum switch, as already implemented in some preset cases. Not implemented in all Realtek codecs. Currently, ALC880, 882, 861, 662 and the compatible codecs are supported. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-27 16:35:23 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/*
*/
static int patch_alc861vd(struct hda_codec *codec)
ALSA: hda - Add channel-mode support to Realtek auto-parser This patch adds the support of "Channel Mode" enum control to Realtek auto-parser. When line-in or mic-in jacks are capable to output and free DACs are available, the driver allows to switch to multi-channel mode via "Channel Mode" enum switch, as already implemented in some preset cases. Not implemented in all Realtek codecs. Currently, ALC880, 882, 861, 662 and the compatible codecs are supported. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-27 16:35:23 +02:00
{
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
struct alc_spec *spec;
ALSA: hda - Remove all ALC861 and ALC861-VD quirks Let's remove the rest of ALC861 and ALC861-VD quirks. If any breakage is found, it can be fixed easily via the pin-config table update. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 17:34:25 +02:00
int err;
ALSA: hda - Add channel-mode support to Realtek auto-parser This patch adds the support of "Channel Mode" enum control to Realtek auto-parser. When line-in or mic-in jacks are capable to output and free DACs are available, the driver allows to switch to multi-channel mode via "Channel Mode" enum switch, as already implemented in some preset cases. Not implemented in all Realtek codecs. Currently, ALC880, 882, 861, 662 and the compatible codecs are supported. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-27 16:35:23 +02:00
ALSA: hda/realtek - Call a common helper for alc_spec initialization Just a clean up by calling the same helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 18:03:15 +02:00
err = alc_alloc_spec(codec, 0x0b);
if (err < 0)
return err;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
ALSA: hda/realtek - Call a common helper for alc_spec initialization Just a clean up by calling the same helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 18:03:15 +02:00
spec = codec->spec;
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_pick_fixup(codec, NULL, alc861vd_fixup_tbl, alc861vd_fixups);
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
ALSA: hda - Remove all ALC861 and ALC861-VD quirks Let's remove the rest of ALC861 and ALC861-VD quirks. If any breakage is found, it can be fixed easily via the pin-config table update. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 17:34:25 +02:00
/* automatic parse from the BIOS config */
err = alc861vd_parse_auto_config(codec);
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
if (err < 0)
goto error;
ALSA: hda - Add channel-mode support to Realtek auto-parser This patch adds the support of "Channel Mode" enum control to Realtek auto-parser. When line-in or mic-in jacks are capable to output and free DACs are available, the driver allows to switch to multi-channel mode via "Channel Mode" enum switch, as already implemented in some preset cases. Not implemented in all Realtek codecs. Currently, ALC880, 882, 861, 662 and the compatible codecs are supported. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-27 16:35:23 +02:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
if (!spec->gen.no_analog) {
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
err = snd_hda_attach_beep_device(codec, 0x23);
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
if (err < 0)
goto error;
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
}
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
codec->patch_ops = alc_patch_ops;
spec->shutup = alc_eapd_shutup;
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE);
ALSA: hda/realtek - Apply probe-fixup really after probing Move the call of alc_apply_fixup() with ALC_FIXUP_ACT_PROBE after the whole setups of patch_ops & co, so that the fix-up function may override the default setup. This will be needed for installing the own unsol event handler (e.g. for volume-knob controls). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 15:47:55 +01:00
ALSA: hda - Add channel-mode support to Realtek auto-parser This patch adds the support of "Channel Mode" enum control to Realtek auto-parser. When line-in or mic-in jacks are capable to output and free DACs are available, the driver allows to switch to multi-channel mode via "Channel Mode" enum switch, as already implemented in some preset cases. Not implemented in all Realtek codecs. Currently, ALC880, 882, 861, 662 and the compatible codecs are supported. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-27 16:35:23 +02:00
return 0;
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
error:
alc_free(codec);
return err;
ALSA: hda - Add channel-mode support to Realtek auto-parser This patch adds the support of "Channel Mode" enum control to Realtek auto-parser. When line-in or mic-in jacks are capable to output and free DACs are available, the driver allows to switch to multi-channel mode via "Channel Mode" enum switch, as already implemented in some preset cases. Not implemented in all Realtek codecs. Currently, ALC880, 882, 861, 662 and the compatible codecs are supported. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-27 16:35:23 +02:00
}
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/*
* ALC662 support
*
* ALC662 is almost identical with ALC880 but has cleaner and more flexible
* configuration. Each pin widget can choose any input DACs and a mixer.
* Each ADC is connected from a mixer of all inputs. This makes possible
* 6-channel independent captures.
*
* In addition, an independent DAC for the multi-playback (not used in this
* driver yet).
*/
/*
* BIOS auto configuration
*/
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
static int alc662_parse_auto_config(struct hda_codec *codec)
{
ALSA: hda - Constify fixup and other array data in patch_realtek.c Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02 11:30:18 +02:00
static const hda_nid_t alc662_ignore[] = { 0x1d, 0 };
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
static const hda_nid_t alc663_ssids[] = { 0x15, 0x1b, 0x14, 0x21 };
static const hda_nid_t alc662_ssids[] = { 0x15, 0x1b, 0x14, 0 };
const hda_nid_t *ssids;
ALSA: hda - Add mic-boost controls to ALC662/663 auto configuration Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-09-02 15:42:20 +02:00
ALSA: hda - Add ALC670 codec support - Fixed alc_subsystem_id( ) typo and add new function. - !(ass & 0x100000)) ==> Delete this check. It is unnecessary check. - Add porti - ALC670 support Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-25 08:36:52 +01:00
if (codec->vendor_id == 0x10ec0272 || codec->vendor_id == 0x10ec0663 ||
codec->vendor_id == 0x10ec0665 || codec->vendor_id == 0x10ec0670)
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
ssids = alc663_ssids;
ALSA: hda - Add ALC670 codec support - Fixed alc_subsystem_id( ) typo and add new function. - !(ass & 0x100000)) ==> Delete this check. It is unnecessary check. - Add porti - ALC670 support Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-25 08:36:52 +01:00
else
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
ssids = alc662_ssids;
return alc_parse_auto_config(codec, alc662_ignore, ssids);
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
}
ALSA: hda: Add fixup for mario system create fixup function for the mario model and override amp capabilities for NID 0x2 Signed-off-by: Todd Broch <tbroch@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-07 16:51:05 -08:00
static void alc272_fixup_mario(struct hda_codec *codec,
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
const struct hda_fixup *fix, int action)
ALSA: hda - Apply mario fixup only once The amp-override is necessary only once at initialization time. Also fixed a coding style issue. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-13 14:36:37 +01:00
{
ALSA: hda/realtek - Fix the timing for some fixups Some fixups such as setting the flags influencing on the parser behavior should be applied before actually parsing the tree. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 17:14:29 +01:00
if (action != HDA_FIXUP_ACT_PRE_PROBE)
ALSA: hda - Apply mario fixup only once The amp-override is necessary only once at initialization time. Also fixed a coding style issue. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-13 14:36:37 +01:00
return;
ALSA: hda: Add fixup for mario system create fixup function for the mario model and override amp capabilities for NID 0x2 Signed-off-by: Todd Broch <tbroch@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-07 16:51:05 -08:00
if (snd_hda_override_amp_caps(codec, 0x2, HDA_OUTPUT,
(0x3b << AC_AMPCAP_OFFSET_SHIFT) |
(0x3b << AC_AMPCAP_NUM_STEPS_SHIFT) |
(0x03 << AC_AMPCAP_STEP_SIZE_SHIFT) |
(0 << AC_AMPCAP_MUTE_SHIFT)))
printk(KERN_WARNING
"hda_codec: failed to override amp caps for NID 0x2\n");
}
ALSA: HDA: Add fixup pins for Ideapad Y550 By adding the subwoofer as a speaker pin, it is treated correctly when auto-muting. BugLink: https://launchpad.net/bugs/611803 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 08:51:44 +02:00
enum {
ALSA: hda: Add speaker pin to automute Acer Aspire 8943G BugLink: https://bugs.launchpad.net/bugs/656625 Add clause for handling Acer Aspire 8943G's subwoofer as additional speaker pin for automuting. Reported-by: RussianNeuroMancer Cc: stable@kernel.org Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-10 22:39:28 -04:00
ALC662_FIXUP_ASPIRE,
ALSA: HDA: Add fixup pins for Ideapad Y550 By adding the subwoofer as a speaker pin, it is treated correctly when auto-muting. BugLink: https://launchpad.net/bugs/611803 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 08:51:44 +02:00
ALC662_FIXUP_IDEAPAD,
ALSA: hda: Add fixup for mario system create fixup function for the mario model and override amp capabilities for NID 0x2 Signed-off-by: Todd Broch <tbroch@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-07 16:51:05 -08:00
ALC272_FIXUP_MARIO,
ALSA: hda - Fix EAPD to low on CZC P10T tablet computer with ALC662 Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-20 12:36:21 +01:00
ALC662_FIXUP_CZC_P10T,
ALSA: HDA: Fix automute for Gateway NV79 The PCI SSID is 1025:031c and the codec SSID is 1025:031d, so the driver mistakes this for a SKU value, but looking at the numbers, this is obviously wrong. Cc: stable@kernel.org (2.6.38+) BugLink: http://bugs.launchpad.net/bugs/761861 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-29 14:10:55 +02:00
ALC662_FIXUP_SKU_IGNORE,
ALSA: hda - Add a fix-up for HP RP5800 The BIOS provides bogus pin configs, and also invalid SSID. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-29 17:21:00 +02:00
ALC662_FIXUP_HP_RP5800,
ALSA: hda - Rewrite ALC662 asus-mode* models with fixups Re-implement the asus-mode[1-8] quirks with the pin-config tables. They are provided in case where BIOS is broken on the device, so it's not enabled in PCI SSID lookup table. User needs to specify it via model option explicitly if the driver doesn't work with the BIOS setup as is. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:27:14 +02:00
ALC662_FIXUP_ASUS_MODE1,
ALC662_FIXUP_ASUS_MODE2,
ALC662_FIXUP_ASUS_MODE3,
ALC662_FIXUP_ASUS_MODE4,
ALC662_FIXUP_ASUS_MODE5,
ALC662_FIXUP_ASUS_MODE6,
ALC662_FIXUP_ASUS_MODE7,
ALC662_FIXUP_ASUS_MODE8,
ALSA: hda - Add another jack-detection suppression for ASUS ALC892 Add the jack-detect suppression for an ASUS machine with ALC892 codec. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42655 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 12:03:25 +01:00
ALC662_FIXUP_NO_JACK_DETECT,
ALSA: HDA: Pin fixup for Zotac Z68 motherboard Pin 0x1b was connected to the front panel connector, which according to the HDA standard should contain a mic and a headphone. In this case, the headphone was listed as "line out" by BIOS. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/993162 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-12 13:15:12 +02:00
ALC662_FIXUP_ZOTAC_Z68,
ALSA: hda - Add the inverted digital mic workaround to Realtek codecs Some laptops are equipped with ForteMedia digital mics that give the differential input. With such devices, summing stereo streams into a mono (like PulseAudio does) results in almost silence. This patch provides a workaround for this bug by adding a new mixer switch to turn on/off the right channel of digital mic, just like a similar fix for Conexant codecs. When the new switch "Inverted Internal Mic Capture Switch" is off and the current input source is the digital mic, the right channel of the recording stream is muted. When another input source is selected, the right channel is restored. Tested-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-22 14:30:29 +02:00
ALC662_FIXUP_INV_DMIC,
ALSA: HDA: Add fixup pins for Ideapad Y550 By adding the subwoofer as a speaker pin, it is treated correctly when auto-muting. BugLink: https://launchpad.net/bugs/611803 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 08:51:44 +02:00
};
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
static const struct hda_fixup alc662_fixups[] = {
ALSA: hda: Add speaker pin to automute Acer Aspire 8943G BugLink: https://bugs.launchpad.net/bugs/656625 Add clause for handling Acer Aspire 8943G's subwoofer as additional speaker pin for automuting. Reported-by: RussianNeuroMancer Cc: stable@kernel.org Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-10 22:39:28 -04:00
[ALC662_FIXUP_ASPIRE] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda: Add speaker pin to automute Acer Aspire 8943G BugLink: https://bugs.launchpad.net/bugs/656625 Add clause for handling Acer Aspire 8943G's subwoofer as additional speaker pin for automuting. Reported-by: RussianNeuroMancer Cc: stable@kernel.org Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-10 22:39:28 -04:00
{ 0x15, 0x99130112 }, /* subwoofer */
{ }
}
},
ALSA: HDA: Add fixup pins for Ideapad Y550 By adding the subwoofer as a speaker pin, it is treated correctly when auto-muting. BugLink: https://launchpad.net/bugs/611803 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 08:51:44 +02:00
[ALC662_FIXUP_IDEAPAD] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: HDA: Add fixup pins for Ideapad Y550 By adding the subwoofer as a speaker pin, it is treated correctly when auto-muting. BugLink: https://launchpad.net/bugs/611803 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 08:51:44 +02:00
{ 0x17, 0x99130112 }, /* subwoofer */
{ }
}
},
ALSA: hda: Add fixup for mario system create fixup function for the mario model and override amp capabilities for NID 0x2 Signed-off-by: Todd Broch <tbroch@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-07 16:51:05 -08:00
[ALC272_FIXUP_MARIO] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda - Reorganize fixup structure for Realtek Instead of keeping various data types in a single record, put the type field and keep a single value in each entry, but allows chaining multiple fixup entries. This allows more flexible data management (see ALC275_FIXUP_SONY_HWEQ for example). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-13 14:22:32 +01:00
.v.func = alc272_fixup_mario,
ALSA: hda - Fix EAPD to low on CZC P10T tablet computer with ALC662 Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-20 12:36:21 +01:00
},
[ALC662_FIXUP_CZC_P10T] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_VERBS,
ALSA: hda - Fix EAPD to low on CZC P10T tablet computer with ALC662 Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-20 12:36:21 +01:00
.v.verbs = (const struct hda_verb[]) {
{0x14, AC_VERB_SET_EAPD_BTLENABLE, 0},
{}
}
},
ALSA: HDA: Fix automute for Gateway NV79 The PCI SSID is 1025:031c and the codec SSID is 1025:031d, so the driver mistakes this for a SKU value, but looking at the numbers, this is obviously wrong. Cc: stable@kernel.org (2.6.38+) BugLink: http://bugs.launchpad.net/bugs/761861 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-29 14:10:55 +02:00
[ALC662_FIXUP_SKU_IGNORE] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda - Move up the fixup helper functions to the library module Move the fixup helper functions in patch_realtek.c to hda_auto_parser.c so that they can be used in other codec drivers like patch_conexant.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 17:17:32 +02:00
.v.func = alc_fixup_sku_ignore,
ALSA: hda - Fix pin-config of Gigabyte mobo Use pin-fix instead of the static quirk for Gigabyte mobos 1458:a002. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=677256 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-28 12:05:31 +02:00
},
ALSA: hda - Add a fix-up for HP RP5800 The BIOS provides bogus pin configs, and also invalid SSID. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-29 17:21:00 +02:00
[ALC662_FIXUP_HP_RP5800] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - Add a fix-up for HP RP5800 The BIOS provides bogus pin configs, and also invalid SSID. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-29 17:21:00 +02:00
{ 0x14, 0x0221201f }, /* HP out */
{ }
},
.chained = true,
.chain_id = ALC662_FIXUP_SKU_IGNORE
},
ALSA: hda - Rewrite ALC662 asus-mode* models with fixups Re-implement the asus-mode[1-8] quirks with the pin-config tables. They are provided in case where BIOS is broken on the device, so it's not enabled in PCI SSID lookup table. User needs to specify it via model option explicitly if the driver doesn't work with the BIOS setup as is. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:27:14 +02:00
[ALC662_FIXUP_ASUS_MODE1] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - Rewrite ALC662 asus-mode* models with fixups Re-implement the asus-mode[1-8] quirks with the pin-config tables. They are provided in case where BIOS is broken on the device, so it's not enabled in PCI SSID lookup table. User needs to specify it via model option explicitly if the driver doesn't work with the BIOS setup as is. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:27:14 +02:00
{ 0x14, 0x99130110 }, /* speaker */
{ 0x18, 0x01a19c20 }, /* mic */
{ 0x19, 0x99a3092f }, /* int-mic */
{ 0x21, 0x0121401f }, /* HP out */
{ }
},
.chained = true,
.chain_id = ALC662_FIXUP_SKU_IGNORE
},
[ALC662_FIXUP_ASUS_MODE2] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - Remove ALC662 eeepc-p701 and ecs models These are confirmed to work with the auto-parser with pincfg fixups. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-18 16:02:24 +02:00
{ 0x14, 0x99130110 }, /* speaker */
{ 0x18, 0x01a19820 }, /* mic */
{ 0x19, 0x99a3092f }, /* int-mic */
{ 0x1b, 0x0121401f }, /* HP out */
{ }
},
ALSA: hda - Rewrite ALC662 asus-mode* models with fixups Re-implement the asus-mode[1-8] quirks with the pin-config tables. They are provided in case where BIOS is broken on the device, so it's not enabled in PCI SSID lookup table. User needs to specify it via model option explicitly if the driver doesn't work with the BIOS setup as is. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:27:14 +02:00
.chained = true,
.chain_id = ALC662_FIXUP_SKU_IGNORE
},
[ALC662_FIXUP_ASUS_MODE3] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - Rewrite ALC662 asus-mode* models with fixups Re-implement the asus-mode[1-8] quirks with the pin-config tables. They are provided in case where BIOS is broken on the device, so it's not enabled in PCI SSID lookup table. User needs to specify it via model option explicitly if the driver doesn't work with the BIOS setup as is. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:27:14 +02:00
{ 0x14, 0x99130110 }, /* speaker */
{ 0x15, 0x0121441f }, /* HP */
{ 0x18, 0x01a19840 }, /* mic */
{ 0x19, 0x99a3094f }, /* int-mic */
{ 0x21, 0x01211420 }, /* HP2 */
{ }
},
.chained = true,
.chain_id = ALC662_FIXUP_SKU_IGNORE
},
[ALC662_FIXUP_ASUS_MODE4] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - Rewrite ALC662 asus-mode* models with fixups Re-implement the asus-mode[1-8] quirks with the pin-config tables. They are provided in case where BIOS is broken on the device, so it's not enabled in PCI SSID lookup table. User needs to specify it via model option explicitly if the driver doesn't work with the BIOS setup as is. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:27:14 +02:00
{ 0x14, 0x99130110 }, /* speaker */
{ 0x16, 0x99130111 }, /* speaker */
{ 0x18, 0x01a19840 }, /* mic */
{ 0x19, 0x99a3094f }, /* int-mic */
{ 0x21, 0x0121441f }, /* HP */
{ }
},
.chained = true,
.chain_id = ALC662_FIXUP_SKU_IGNORE
},
[ALC662_FIXUP_ASUS_MODE5] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - Rewrite ALC662 asus-mode* models with fixups Re-implement the asus-mode[1-8] quirks with the pin-config tables. They are provided in case where BIOS is broken on the device, so it's not enabled in PCI SSID lookup table. User needs to specify it via model option explicitly if the driver doesn't work with the BIOS setup as is. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:27:14 +02:00
{ 0x14, 0x99130110 }, /* speaker */
{ 0x15, 0x0121441f }, /* HP */
{ 0x16, 0x99130111 }, /* speaker */
{ 0x18, 0x01a19840 }, /* mic */
{ 0x19, 0x99a3094f }, /* int-mic */
{ }
},
.chained = true,
.chain_id = ALC662_FIXUP_SKU_IGNORE
},
[ALC662_FIXUP_ASUS_MODE6] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - Rewrite ALC662 asus-mode* models with fixups Re-implement the asus-mode[1-8] quirks with the pin-config tables. They are provided in case where BIOS is broken on the device, so it's not enabled in PCI SSID lookup table. User needs to specify it via model option explicitly if the driver doesn't work with the BIOS setup as is. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:27:14 +02:00
{ 0x14, 0x99130110 }, /* speaker */
{ 0x15, 0x01211420 }, /* HP2 */
{ 0x18, 0x01a19840 }, /* mic */
{ 0x19, 0x99a3094f }, /* int-mic */
{ 0x1b, 0x0121441f }, /* HP */
{ }
},
.chained = true,
.chain_id = ALC662_FIXUP_SKU_IGNORE
},
[ALC662_FIXUP_ASUS_MODE7] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - Rewrite ALC662 asus-mode* models with fixups Re-implement the asus-mode[1-8] quirks with the pin-config tables. They are provided in case where BIOS is broken on the device, so it's not enabled in PCI SSID lookup table. User needs to specify it via model option explicitly if the driver doesn't work with the BIOS setup as is. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:27:14 +02:00
{ 0x14, 0x99130110 }, /* speaker */
{ 0x17, 0x99130111 }, /* speaker */
{ 0x18, 0x01a19840 }, /* mic */
{ 0x19, 0x99a3094f }, /* int-mic */
{ 0x1b, 0x01214020 }, /* HP */
{ 0x21, 0x0121401f }, /* HP */
{ }
},
.chained = true,
.chain_id = ALC662_FIXUP_SKU_IGNORE
},
[ALC662_FIXUP_ASUS_MODE8] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: hda - Rewrite ALC662 asus-mode* models with fixups Re-implement the asus-mode[1-8] quirks with the pin-config tables. They are provided in case where BIOS is broken on the device, so it's not enabled in PCI SSID lookup table. User needs to specify it via model option explicitly if the driver doesn't work with the BIOS setup as is. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:27:14 +02:00
{ 0x14, 0x99130110 }, /* speaker */
{ 0x12, 0x99a30970 }, /* int-mic */
{ 0x15, 0x01214020 }, /* HP */
{ 0x17, 0x99130111 }, /* speaker */
{ 0x18, 0x01a19840 }, /* mic */
{ 0x21, 0x0121401f }, /* HP */
{ }
},
.chained = true,
.chain_id = ALC662_FIXUP_SKU_IGNORE
ALSA: hda - Remove ALC662 eeepc-p701 and ecs models These are confirmed to work with the auto-parser with pincfg fixups. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-18 16:02:24 +02:00
},
ALSA: hda - Add another jack-detection suppression for ASUS ALC892 Add the jack-detect suppression for an ASUS machine with ALC892 codec. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42655 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 12:03:25 +01:00
[ALC662_FIXUP_NO_JACK_DETECT] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda - Add another jack-detection suppression for ASUS ALC892 Add the jack-detect suppression for an ASUS machine with ALC892 codec. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42655 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 12:03:25 +01:00
.v.func = alc_fixup_no_jack_detect,
},
ALSA: HDA: Pin fixup for Zotac Z68 motherboard Pin 0x1b was connected to the front panel connector, which according to the HDA standard should contain a mic and a headphone. In this case, the headphone was listed as "line out" by BIOS. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/993162 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-12 13:15:12 +02:00
[ALC662_FIXUP_ZOTAC_Z68] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
ALSA: HDA: Pin fixup for Zotac Z68 motherboard Pin 0x1b was connected to the front panel connector, which according to the HDA standard should contain a mic and a headphone. In this case, the headphone was listed as "line out" by BIOS. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/993162 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-12 13:15:12 +02:00
{ 0x1b, 0x02214020 }, /* Front HP */
{ }
}
},
ALSA: hda - Add the inverted digital mic workaround to Realtek codecs Some laptops are equipped with ForteMedia digital mics that give the differential input. With such devices, summing stereo streams into a mono (like PulseAudio does) results in almost silence. This patch provides a workaround for this bug by adding a new mixer switch to turn on/off the right channel of digital mic, just like a similar fix for Conexant codecs. When the new switch "Inverted Internal Mic Capture Switch" is off and the current input source is the digital mic, the right channel of the recording stream is muted. When another input source is selected, the right channel is restored. Tested-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-22 14:30:29 +02:00
[ALC662_FIXUP_INV_DMIC] = {
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
.type = HDA_FIXUP_FUNC,
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
.v.func = alc_fixup_inv_dmic_0x12,
ALSA: hda - Add the inverted digital mic workaround to Realtek codecs Some laptops are equipped with ForteMedia digital mics that give the differential input. With such devices, summing stereo streams into a mono (like PulseAudio does) results in almost silence. This patch provides a workaround for this bug by adding a new mixer switch to turn on/off the right channel of digital mic, just like a similar fix for Conexant codecs. When the new switch "Inverted Internal Mic Capture Switch" is off and the current input source is the digital mic, the right channel of the recording stream is muted. When another input source is selected, the right channel is restored. Tested-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-22 14:30:29 +02:00
},
ALSA: HDA: Add fixup pins for Ideapad Y550 By adding the subwoofer as a speaker pin, it is treated correctly when auto-muting. BugLink: https://launchpad.net/bugs/611803 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 08:51:44 +02:00
};
ALSA: hda - Constify fixup and other array data in patch_realtek.c Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02 11:30:18 +02:00
static const struct snd_pci_quirk alc662_fixup_tbl[] = {
ALSA: hda - Rewrite ALC662 asus-mode* models with fixups Re-implement the asus-mode[1-8] quirks with the pin-config tables. They are provided in case where BIOS is broken on the device, so it's not enabled in PCI SSID lookup table. User needs to specify it via model option explicitly if the driver doesn't work with the BIOS setup as is. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:27:14 +02:00
SND_PCI_QUIRK(0x1019, 0x9087, "ECS", ALC662_FIXUP_ASUS_MODE2),
ALSA: HDA: Add subwoofer quirk for Acer Aspire 8942G According to the reporter, node 0x15 needs to be muted for subwoofer to stop sounding. This pin is marked as unused by BIOS, so fix that. BugLink: http://bugs.launchpad.net/bugs/715877 Cc: stable@kernel.org (2.6.37+) Reported-by: Hans Peter Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-10 15:39:19 +01:00
SND_PCI_QUIRK(0x1025, 0x0308, "Acer Aspire 8942G", ALC662_FIXUP_ASPIRE),
ALSA: HDA: Fix automute for Gateway NV79 The PCI SSID is 1025:031c and the codec SSID is 1025:031d, so the driver mistakes this for a SKU value, but looking at the numbers, this is obviously wrong. Cc: stable@kernel.org (2.6.38+) BugLink: http://bugs.launchpad.net/bugs/761861 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-29 14:10:55 +02:00
SND_PCI_QUIRK(0x1025, 0x031c, "Gateway NV79", ALC662_FIXUP_SKU_IGNORE),
ALSA: hda - Add the inverted digital mic workaround to Realtek codecs Some laptops are equipped with ForteMedia digital mics that give the differential input. With such devices, summing stereo streams into a mono (like PulseAudio does) results in almost silence. This patch provides a workaround for this bug by adding a new mixer switch to turn on/off the right channel of digital mic, just like a similar fix for Conexant codecs. When the new switch "Inverted Internal Mic Capture Switch" is off and the current input source is the digital mic, the right channel of the recording stream is muted. When another input source is selected, the right channel is restored. Tested-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-22 14:30:29 +02:00
SND_PCI_QUIRK(0x1025, 0x0349, "eMachines eM250", ALC662_FIXUP_INV_DMIC),
ALSA: hda: Add speaker pin to automute Acer Aspire 8943G BugLink: https://bugs.launchpad.net/bugs/656625 Add clause for handling Acer Aspire 8943G's subwoofer as additional speaker pin for automuting. Reported-by: RussianNeuroMancer Cc: stable@kernel.org Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-10 22:39:28 -04:00
SND_PCI_QUIRK(0x1025, 0x038b, "Acer Aspire 8943G", ALC662_FIXUP_ASPIRE),
ALSA: hda - Add a fix-up for HP RP5800 The BIOS provides bogus pin configs, and also invalid SSID. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-29 17:21:00 +02:00
SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800),
ALSA: hda - Add another jack-detection suppression for ASUS ALC892 Add the jack-detect suppression for an ASUS machine with ALC892 codec. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42655 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 12:03:25 +01:00
SND_PCI_QUIRK(0x1043, 0x8469, "ASUS mobo", ALC662_FIXUP_NO_JACK_DETECT),
ALSA: hda - Rewrite ALC662 asus-mode* models with fixups Re-implement the asus-mode[1-8] quirks with the pin-config tables. They are provided in case where BIOS is broken on the device, so it's not enabled in PCI SSID lookup table. User needs to specify it via model option explicitly if the driver doesn't work with the BIOS setup as is. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:27:14 +02:00
SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_FIXUP_ASUS_MODE2),
ALSA: hda: Add Samsung R720 SSID for subwoofer pin fixup BugLink: https://launchpad.net/bugs/677830 The original reporter states that the subwoofer does not mute when inserting headphones. We need an entry for his machine's SSID in the subwoofer pin fixup list, so add it there (verified using hda_analyzer). Reported-and-tested-by: i-NoD Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-20 10:20:35 -05:00
SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD),
ALSA: hda - Added fixup for Lenovo Y550P Signed-off-by: Valentine Sinitsyn <valentine.sinitsyn@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-01 22:24:08 +06:00
SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD),
ALSA: HDA: Add fixup pins for Ideapad Y550 By adding the subwoofer as a speaker pin, it is treated correctly when auto-muting. BugLink: https://launchpad.net/bugs/611803 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 08:51:44 +02:00
SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD),
ALSA: HDA: Pin fixup for Zotac Z68 motherboard Pin 0x1b was connected to the front panel connector, which according to the HDA standard should contain a mic and a headphone. In this case, the headphone was listed as "line out" by BIOS. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/993162 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-12 13:15:12 +02:00
SND_PCI_QUIRK(0x19da, 0xa130, "Zotac Z68", ALC662_FIXUP_ZOTAC_Z68),
ALSA: hda - Fix EAPD to low on CZC P10T tablet computer with ALC662 Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-20 12:36:21 +01:00
SND_PCI_QUIRK(0x1b35, 0x2206, "CZC P10T", ALC662_FIXUP_CZC_P10T),
ALSA: hda - Rewrite ALC662 asus-mode* models with fixups Re-implement the asus-mode[1-8] quirks with the pin-config tables. They are provided in case where BIOS is broken on the device, so it's not enabled in PCI SSID lookup table. User needs to specify it via model option explicitly if the driver doesn't work with the BIOS setup as is. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:27:14 +02:00
#if 0
/* Below is a quirk table taken from the old code.
* Basically the device should work as is without the fixup table.
* If BIOS doesn't give a proper info, enable the corresponding
* fixup entry.
ALSA: hda/realtek - Fix mem leak (and rid us of trailing whitespace). In sound/pci/hda/patch_realtek.c::alc_auto_fill_dac_nids(), in the 'for (;;)' loop, if the 'badness' value returned from fill_and_eval_dacs() is negative, then we'll return from the function without freeing the memory we allocated for 'best_cfg', thus leaking. Fix the leak by kfree()'ing the memory when badness is negative. While I was there I also noticed some trailing whitespace in the function that I removed (along with all other trailing whitespace in the file) - it didn't seem worth-while to do that as two patches, so I hope it's OK that I just did it all as one patch. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-12 22:11:25 +02:00
*/
ALSA: hda - Rewrite ALC662 asus-mode* models with fixups Re-implement the asus-mode[1-8] quirks with the pin-config tables. They are provided in case where BIOS is broken on the device, so it's not enabled in PCI SSID lookup table. User needs to specify it via model option explicitly if the driver doesn't work with the BIOS setup as is. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:27:14 +02:00
SND_PCI_QUIRK(0x1043, 0x1000, "ASUS N50Vm", ALC662_FIXUP_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1092, "ASUS NB", ALC662_FIXUP_ASUS_MODE3),
SND_PCI_QUIRK(0x1043, 0x1173, "ASUS K73Jn", ALC662_FIXUP_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x11c3, "ASUS M70V", ALC662_FIXUP_ASUS_MODE3),
SND_PCI_QUIRK(0x1043, 0x11d3, "ASUS NB", ALC662_FIXUP_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x11f3, "ASUS NB", ALC662_FIXUP_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1203, "ASUS NB", ALC662_FIXUP_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1303, "ASUS G60J", ALC662_FIXUP_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1333, "ASUS G60Jx", ALC662_FIXUP_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1339, "ASUS NB", ALC662_FIXUP_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x13e3, "ASUS N71JA", ALC662_FIXUP_ASUS_MODE7),
SND_PCI_QUIRK(0x1043, 0x1463, "ASUS N71", ALC662_FIXUP_ASUS_MODE7),
SND_PCI_QUIRK(0x1043, 0x14d3, "ASUS G72", ALC662_FIXUP_ASUS_MODE8),
SND_PCI_QUIRK(0x1043, 0x1563, "ASUS N90", ALC662_FIXUP_ASUS_MODE3),
SND_PCI_QUIRK(0x1043, 0x15d3, "ASUS N50SF F50SF", ALC662_FIXUP_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x16c3, "ASUS NB", ALC662_FIXUP_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x16f3, "ASUS K40C K50C", ALC662_FIXUP_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1733, "ASUS N81De", ALC662_FIXUP_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1753, "ASUS NB", ALC662_FIXUP_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1763, "ASUS NB", ALC662_FIXUP_ASUS_MODE6),
SND_PCI_QUIRK(0x1043, 0x1765, "ASUS NB", ALC662_FIXUP_ASUS_MODE6),
SND_PCI_QUIRK(0x1043, 0x1783, "ASUS NB", ALC662_FIXUP_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1793, "ASUS F50GX", ALC662_FIXUP_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x17b3, "ASUS F70SL", ALC662_FIXUP_ASUS_MODE3),
SND_PCI_QUIRK(0x1043, 0x17f3, "ASUS X58LE", ALC662_FIXUP_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1813, "ASUS NB", ALC662_FIXUP_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1823, "ASUS NB", ALC662_FIXUP_ASUS_MODE5),
SND_PCI_QUIRK(0x1043, 0x1833, "ASUS NB", ALC662_FIXUP_ASUS_MODE6),
SND_PCI_QUIRK(0x1043, 0x1843, "ASUS NB", ALC662_FIXUP_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1853, "ASUS F50Z", ALC662_FIXUP_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1864, "ASUS NB", ALC662_FIXUP_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1876, "ASUS NB", ALC662_FIXUP_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1893, "ASUS M50Vm", ALC662_FIXUP_ASUS_MODE3),
SND_PCI_QUIRK(0x1043, 0x1894, "ASUS X55", ALC662_FIXUP_ASUS_MODE3),
SND_PCI_QUIRK(0x1043, 0x18b3, "ASUS N80Vc", ALC662_FIXUP_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x18c3, "ASUS VX5", ALC662_FIXUP_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x18d3, "ASUS N81Te", ALC662_FIXUP_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x18f3, "ASUS N505Tp", ALC662_FIXUP_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1903, "ASUS F5GL", ALC662_FIXUP_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1913, "ASUS NB", ALC662_FIXUP_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1933, "ASUS F80Q", ALC662_FIXUP_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1943, "ASUS Vx3V", ALC662_FIXUP_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1953, "ASUS NB", ALC662_FIXUP_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1963, "ASUS X71C", ALC662_FIXUP_ASUS_MODE3),
SND_PCI_QUIRK(0x1043, 0x1983, "ASUS N5051A", ALC662_FIXUP_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1993, "ASUS N20", ALC662_FIXUP_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x19b3, "ASUS F7Z", ALC662_FIXUP_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x19c3, "ASUS F5Z/F6x", ALC662_FIXUP_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x19e3, "ASUS NB", ALC662_FIXUP_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x19f3, "ASUS NB", ALC662_FIXUP_ASUS_MODE4),
#endif
ALSA: HDA: Add fixup pins for Ideapad Y550 By adding the subwoofer as a speaker pin, it is treated correctly when auto-muting. BugLink: https://launchpad.net/bugs/611803 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 08:51:44 +02:00
{}
};
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
static const struct hda_model_fixup alc662_fixup_models[] = {
ALSA: hda: Add fixup for mario system create fixup function for the mario model and override amp capabilities for NID 0x2 Signed-off-by: Todd Broch <tbroch@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-07 16:51:05 -08:00
{.id = ALC272_FIXUP_MARIO, .name = "mario"},
ALSA: hda - Rewrite ALC662 asus-mode* models with fixups Re-implement the asus-mode[1-8] quirks with the pin-config tables. They are provided in case where BIOS is broken on the device, so it's not enabled in PCI SSID lookup table. User needs to specify it via model option explicitly if the driver doesn't work with the BIOS setup as is. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:27:14 +02:00
{.id = ALC662_FIXUP_ASUS_MODE1, .name = "asus-mode1"},
{.id = ALC662_FIXUP_ASUS_MODE2, .name = "asus-mode2"},
{.id = ALC662_FIXUP_ASUS_MODE3, .name = "asus-mode3"},
{.id = ALC662_FIXUP_ASUS_MODE4, .name = "asus-mode4"},
{.id = ALC662_FIXUP_ASUS_MODE5, .name = "asus-mode5"},
{.id = ALC662_FIXUP_ASUS_MODE6, .name = "asus-mode6"},
{.id = ALC662_FIXUP_ASUS_MODE7, .name = "asus-mode7"},
{.id = ALC662_FIXUP_ASUS_MODE8, .name = "asus-mode8"},
ALSA: hda - Add inv-dmic model to possible Realtek codecs For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
{.id = ALC662_FIXUP_INV_DMIC, .name = "inv-dmic"},
ALSA: hda: Add fixup for mario system create fixup function for the mario model and override amp capabilities for NID 0x2 Signed-off-by: Todd Broch <tbroch@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-07 16:51:05 -08:00
{}
};
ALSA: HDA: Add fixup pins for Ideapad Y550 By adding the subwoofer as a speaker pin, it is treated correctly when auto-muting. BugLink: https://launchpad.net/bugs/611803 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 08:51:44 +02:00
ALSA: hda - Fix no sound from ALC662 after Windows reboot Windows use hidden register to control EAPD. Linux use verb to control EAPD. If windows reboot to Linux, it must change the EAPD control to verb control. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-29 09:35:52 +02:00
static void alc662_fill_coef(struct hda_codec *codec)
{
int val, coef;
coef = alc_get_coef0(codec);
switch (codec->vendor_id) {
case 0x10ec0662:
if ((coef & 0x00f0) == 0x0030) {
val = alc_read_coef_idx(codec, 0x4); /* EAPD Ctrl */
alc_write_coef_idx(codec, 0x4, val & ~(1<<10));
}
break;
case 0x10ec0272:
case 0x10ec0273:
case 0x10ec0663:
case 0x10ec0665:
case 0x10ec0670:
case 0x10ec0671:
case 0x10ec0672:
val = alc_read_coef_idx(codec, 0xd); /* EAPD Ctrl */
alc_write_coef_idx(codec, 0xd, val | (1<<14));
break;
}
}
ALSA: HDA: Add fixup pins for Ideapad Y550 By adding the subwoofer as a speaker pin, it is treated correctly when auto-muting. BugLink: https://launchpad.net/bugs/611803 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 08:51:44 +02:00
ALSA: hda - Split quirk codes from patch_realtek.c Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 18:23:21 +02:00
/*
*/
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
static int patch_alc662(struct hda_codec *codec)
{
struct alc_spec *spec;
ALSA: hda/realtek - Call a common helper for alc_spec initialization Just a clean up by calling the same helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 18:03:15 +02:00
int err;
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
ALSA: hda/realtek - Call a common helper for alc_spec initialization Just a clean up by calling the same helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 18:03:15 +02:00
err = alc_alloc_spec(codec, 0x0b);
if (err < 0)
return err;
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
ALSA: hda/realtek - Call a common helper for alc_spec initialization Just a clean up by calling the same helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 18:03:15 +02:00
spec = codec->spec;
ALSA: hda - Reduce static init verbs for Realtek auto-parsers Instead of using fixed init verbs, initialize DACs, ADCs and mixers more dynamically for Realtek auto-parsers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27 10:52:59 +02:00
ALSA: hda - Rewrite ALC662 asus-mode* models with fixups Re-implement the asus-mode[1-8] quirks with the pin-config tables. They are provided in case where BIOS is broken on the device, so it's not enabled in PCI SSID lookup table. User needs to specify it via model option explicitly if the driver doesn't work with the BIOS setup as is. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23 18:27:14 +02:00
/* handle multiple HPs as is */
spec->parse_flags = HDA_PINCFG_NO_HP_FIXUP;
[ALSA] hda - Fix PLL gating control on Realtek codecs On some Realtek codecs, the analog PLL gating control bit must be set off while the default value is 1. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-04 12:39:38 +02:00
alc_fix_pll_init(codec, 0x20, 0x04, 15);
ALSA: hda - Fix no sound from ALC662 after Windows reboot Windows use hidden register to control EAPD. Linux use verb to control EAPD. If windows reboot to Linux, it must change the EAPD control to verb control. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-29 09:35:52 +02:00
spec->init_hook = alc662_fill_coef;
alc662_fill_coef(codec);
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_pick_fixup(codec, alc662_fixup_models,
ALSA: hda - Fix ALC272X codec detection The codec ALC272X is a special codec for some Dell machines, and its detection got broken in the recent kernel because SSID check (required by ALC272X check) was moved to the later point. Now we need to move this codec check to the right place, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-21 15:49:33 +02:00
alc662_fixup_tbl, alc662_fixups);
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
ALSA: hda - Fix ALC272X codec detection The codec ALC272X is a special codec for some Dell machines, and its detection got broken in the recent kernel because SSID check (required by ALC272X check) was moved to the later point. Now we need to move this codec check to the right place, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-21 15:49:33 +02:00
alc_auto_parse_customize_define(codec);
ALSA: hda/realtek - Cache COEF 0 value The COEF #0 value represents a sort of device id, so it's supposedly constant while operation. Better to use the cached value instead of reading it at each time from the performance POV. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:50:59 +02:00
if ((alc_get_coef0(codec) & (1 << 14)) &&
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
codec->bus->pci->subsystem_vendor == 0x1025 &&
spec->cdefine.platform_type == 1) {
if (alc_codec_rename(codec, "ALC272X") < 0)
goto error;
ALSA: hda/realtek - Check the error from alc_codec_rename() Should be a rare case, but... Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:00:35 +02:00
}
ALSA: hda - Add ALC661/259, ALC892/888VD support Fixed List: 1. Add alc_read_coef_idx function 2. Add ALC661 ALC259 3. Add ALC892 ALC888VD Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-03 10:07:50 +01:00
ALSA: hda - Remove the rest of ALC662 quirks The rest of ALC662 quirks are only for desktops, and they should work with the auto-parser. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-24 18:08:07 +02:00
/* automatic parse from the BIOS config */
err = alc662_parse_auto_config(codec);
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
if (err < 0)
goto error;
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
ALSA: hda - Use generic parser codes for Realtek driver The next migration step is to use the common code in generic driver for Realtek driver. This is no drastic change and there should be no real functional changes, as the generic parser code comes from Realtek driver originally. As Realtek driver requires the generic parser code, it needs a reverse-selection of CONFIG_SND_HDA_GENERIC kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 15:22:24 +01:00
if (!spec->gen.no_analog && has_cdefine_beep(codec)) {
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
err = snd_hda_attach_beep_device(codec, 0x1);
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
if (err < 0)
goto error;
ALSA: hda - Add parse customize define function for Realtek codecs Added alc_auto_parse_customize_define() to parse the Realtek-specific attributes from SKU. Also enable beep controls only when the proper attribute bit is set. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-19 11:23:45 +01:00
switch (codec->vendor_id) {
case 0x10ec0662:
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
break;
case 0x10ec0272:
case 0x10ec0663:
case 0x10ec0665:
set_beep_amp(spec, 0x0b, 0x04, HDA_INPUT);
break;
case 0x10ec0273:
set_beep_amp(spec, 0x0b, 0x03, HDA_INPUT);
break;
}
ALSA: hda - Add support of ALC665 - Add support for ALC665 - Add more ASUS model - Modify common patch for ALC272 ALC273 ALC661 ALC662 ALC663 ALC665 Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-04 14:18:18 +01:00
}
[ALSA] hda-codec - Add virtual master controls Add master controls using vmaster to codecs that have no real hardware master volume registers. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-10 16:53:55 +01:00
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
codec->patch_ops = alc_patch_ops;
ALSA: hda - Introduce shutup callback to Realtek spec struct Add shutup callback to be called codec-specifically for avoiding pop noises at suspend or shutdown. As a generic callback, just turn EAPD off. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-07 10:37:16 +02:00
spec->shutup = alc_eapd_shutup;
ALSA: HDA: Add fixup pins for Ideapad Y550 By adding the subwoofer as a speaker pin, it is treated correctly when auto-muting. BugLink: https://launchpad.net/bugs/611803 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-09 08:51:44 +02:00
ALSA: hda/realtek - Drop aliases for old fixups Now the whole codebase has been changed from the earlier kernels, it makes little sense to keep these aliases. Simply replace with the official names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 09:52:52 +01:00
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE);
ALSA: hda/realtek - Apply probe-fixup really after probing Move the call of alc_apply_fixup() with ALC_FIXUP_ACT_PROBE after the whole setups of patch_ops & co, so that the fix-up function may override the default setup. This will be needed for installing the own unsol event handler (e.g. for volume-knob controls). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20 15:47:55 +01:00
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
return 0;
ALSA: hda - ALC888S-VC remark to ALC886 Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:02:42 +02:00
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
error:
alc_free(codec);
return err;
ALSA: hda - Add support of ALC898/899 codec These are compatible with ALC882 codec. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-18 11:51:15 +02:00
}
ALSA: hda - Support ALC680 codec Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-23 16:25:26 +02:00
/*
* ALC680 support
*/
static int alc680_parse_auto_config(struct hda_codec *codec)
{
ALSA: hda - Merge alc*_parse_auto_config() functions in patch_realtek.c Now all alc*_parse_auto_config() do almost same thing except for the NID list to ignore and the PINs for SSID-check, we can merge all these to a single function. A good amount of code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-08 16:55:13 +02:00
return alc_parse_auto_config(codec, NULL, NULL);
ALSA: hda - Support ALC680 codec Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-23 16:25:26 +02:00
}
/*
*/
static int patch_alc680(struct hda_codec *codec)
{
int err;
ALSA: hda - Reduce static init verbs for Realtek auto-parsers Instead of using fixed init verbs, initialize DACs, ADCs and mixers more dynamically for Realtek auto-parsers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27 10:52:59 +02:00
/* ALC680 has no aa-loopback mixer */
ALSA: hda/realtek - Call a common helper for alc_spec initialization Just a clean up by calling the same helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 18:03:15 +02:00
err = alc_alloc_spec(codec, 0);
if (err < 0)
return err;
ALSA: hda - Reduce static init verbs for Realtek auto-parsers Instead of using fixed init verbs, initialize DACs, ADCs and mixers more dynamically for Realtek auto-parsers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27 10:52:59 +02:00
ALSA: hda - Remove ALC680 model quirks The auto-parser works fine. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-15 13:21:48 +02:00
/* automatic parse from the BIOS config */
err = alc680_parse_auto_config(codec);
if (err < 0) {
alc_free(codec);
return err;
ALSA: hda - Support ALC680 codec Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-23 16:25:26 +02:00
}
codec->patch_ops = alc_patch_ops;
return 0;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* patch entries
*/
ALSA: hda - Constify fixup and other array data in patch_realtek.c Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-02 11:30:18 +02:00
static const struct hda_codec_preset snd_hda_preset_realtek[] = {
ALSA: hda - Add support of ALC221 / ALC276 codecs Compatible with ALC269. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-18 11:52:36 +02:00
{ .id = 0x10ec0221, .name = "ALC221", .patch = patch_alc269 },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{ .id = 0x10ec0260, .name = "ALC260", .patch = patch_alc260 },
[ALSA] hda-codec - Add the support of ALC262,ALC883,ALC885,ALC861 Modules: HDA Codec driver,HDA generic driver This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver More models and improvements for ALC880, ALC260 and ALC882 codecs, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-12-05 19:42:22 +01:00
{ .id = 0x10ec0262, .name = "ALC262", .patch = patch_alc262 },
[ALSA] hda-codec - Add ALC889/ALC267/ALC269 support Added the support of new Realtek codecs: 1. New ALC889 Support 2. New ALC267 Support 3. New ALC269 Support Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-12-13 16:52:54 +01:00
{ .id = 0x10ec0267, .name = "ALC267", .patch = patch_alc268 },
[ALSA] hda-codec - Add support of ALC268 codec Added the support of new ALC268 codec chip. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-06-05 12:30:55 +02:00
{ .id = 0x10ec0268, .name = "ALC268", .patch = patch_alc268 },
[ALSA] hda-codec - Add ALC889/ALC267/ALC269 support Added the support of new Realtek codecs: 1. New ALC889 Support 2. New ALC267 Support 3. New ALC269 Support Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-12-13 16:52:54 +01:00
{ .id = 0x10ec0269, .name = "ALC269", .patch = patch_alc269 },
ALSA: hda - More ALC663 fixes and support of compatible chips 1. Add more ASUS NB model. 2. Fixed alc663_m51va_setup M51VA has Digital Mic that NID is 0x12. The record source index is 0x9 for ALC663. So, to modify the alc663_m51va_setup function to index 0x9 and add analog Mic aupport function alc663_mode1_setup. 3. Add ASUS mode7 and mode8 modules for ALC663 Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-17 12:23:00 +01:00
{ .id = 0x10ec0270, .name = "ALC270", .patch = patch_alc269 },
ALSA: hda - Add support of ALC272 Added the support of ALC272 codec. It's almost compatible with ALC663. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-15 11:22:09 +02:00
{ .id = 0x10ec0272, .name = "ALC272", .patch = patch_alc662 },
ALSA: hda - More ALC663 fixes and support of compatible chips 1. Add more ASUS NB model. 2. Fixed alc663_m51va_setup M51VA has Digital Mic that NID is 0x12. The record source index is 0x9 for ALC663. So, to modify the alc663_m51va_setup function to index 0x9 and add analog Mic aupport function alc663_mode1_setup. 3. Add ASUS mode7 and mode8 modules for ALC663 Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-17 12:23:00 +01:00
{ .id = 0x10ec0275, .name = "ALC275", .patch = patch_alc269 },
ALSA: hda - Add support of ALC221 / ALC276 codecs Compatible with ALC269. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-18 11:52:36 +02:00
{ .id = 0x10ec0276, .name = "ALC276", .patch = patch_alc269 },
ALSA: hda - Add Realtek ALC280 codec support This chip looks very similar to ALC269 and ALC27* variants. The bug reporter has verified that sound was working after this patch had been applied. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/1017017 Tested-by: Richard Crossley <richardcrossley@o2.co.uk> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 19:49:28 +02:00
{ .id = 0x10ec0280, .name = "ALC280", .patch = patch_alc269 },
ALSA: hda - Add support for Realtek ALC282 This codec has a separate dmic path (separate dmic only ADC), and thus it looks mostly like ALC275. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/1025377 Tested-by: Ray Chen <ray.chen@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-18 07:38:46 +02:00
{ .id = 0x10ec0282, .name = "ALC282", .patch = patch_alc269 },
ALSA: hda - Add new codec ALC283 ALC290 support These are compatible with standard ALC269 parser. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-06 17:02:30 +02:00
{ .id = 0x10ec0283, .name = "ALC283", .patch = patch_alc269 },
ALSA: hda - Add support of new codec ALC284 Added the support for a new codec ALC284, which is compatible with ALC269. Also add more codec variants to handle the SSID check properly. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 10:25:48 +01:00
{ .id = 0x10ec0284, .name = "ALC284", .patch = patch_alc269 },
ALSA: hda - Add new codec ALC283 ALC290 support These are compatible with standard ALC269 parser. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-06 17:02:30 +02:00
{ .id = 0x10ec0290, .name = "ALC290", .patch = patch_alc269 },
ALSA: hda - Add support for Realtek ALC292 We found a new codec ID 292, and that just a simple quirk would enable sound output/input on this ALC292 chip. BugLink: https://bugs.launchpad.net/bugs/1081466 Cc: stable@vger.kernel.org Tested-by: Acelan Kao <acelan.kao@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-21 08:57:58 +01:00
{ .id = 0x10ec0292, .name = "ALC292", .patch = patch_alc269 },
[ALSA] hda-codec - Add ALC861VD/ALC660VD support o Added ALC861VD support to patch_realtek.c under hda-intel o Added ALC660VD as a model of 861VD o Added pci quirks for Asus G1 as well as for two devices found in Realtek's driver to point at ALC660VD model (3stack-660) o Added pci quirk for Lenovo 3000 C200 - although untested, it should work with ALC861VD 3stack model o Changed preset id = 0x10ec0660 to point at new patch_alc861vd instead of patch_861 o Organised the list of presets Signed-off-by: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-02 18:17:27 +01:00
{ .id = 0x10ec0861, .rev = 0x100340, .name = "ALC660",
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
.patch = patch_alc861 },
[ALSA] hda-codec - Add ALC861VD/ALC660VD support o Added ALC861VD support to patch_realtek.c under hda-intel o Added ALC660VD as a model of 861VD o Added pci quirks for Asus G1 as well as for two devices found in Realtek's driver to point at ALC660VD model (3stack-660) o Added pci quirk for Lenovo 3000 C200 - although untested, it should work with ALC861VD 3stack model o Changed preset id = 0x10ec0660 to point at new patch_alc861vd instead of patch_861 o Organised the list of presets Signed-off-by: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-02 18:17:27 +01:00
{ .id = 0x10ec0660, .name = "ALC660-VD", .patch = patch_alc861vd },
{ .id = 0x10ec0861, .name = "ALC861", .patch = patch_alc861 },
{ .id = 0x10ec0862, .name = "ALC861-VD", .patch = patch_alc861vd },
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
{ .id = 0x10ec0662, .rev = 0x100002, .name = "ALC662 rev2",
ALSA: hda - Merge patch_alc882() and patch_alc883() Merge patch_alc882() and patch_alc883() to the former one since both codecs have fairly similar connections but just a slight difference. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-30 15:28:30 +02:00
.patch = patch_alc882 },
[ALSA] hda-codec - Add ALC662 support - Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-04-12 13:06:07 +02:00
{ .id = 0x10ec0662, .rev = 0x100101, .name = "ALC662 rev1",
.patch = patch_alc662 },
ALSA: HDA: Add new revision for ALC662 The revision 0x100300 was found for ALC662. It seems to work well with patch_alc662. Cc: stable@kernel.org BugLink: http://bugs.launchpad.net/bugs/877373 Tested-by: Shengyao Xue <Shengyao.xue@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Acked-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-18 14:07:51 +02:00
{ .id = 0x10ec0662, .rev = 0x100300, .name = "ALC662 rev3",
.patch = patch_alc662 },
[ALSA] hda - Add ALC663 support Added the support of ALC663 codec, including specific models for ASUS M51VA, ASUS G71V, ASUS H13 and ASUS G50V. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27 12:05:31 +02:00
{ .id = 0x10ec0663, .name = "ALC663", .patch = patch_alc662 },
ALSA: hda - Add support of ALC665 - Add support for ALC665 - Add more ASUS model - Modify common patch for ALC272 ALC273 ALC661 ALC662 ALC663 ALC665 Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-04 14:18:18 +01:00
{ .id = 0x10ec0665, .name = "ALC665", .patch = patch_alc662 },
ALSA: hda - Add new codec ALC668 and ALC900 (default name ALC1150) Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-08 10:25:37 +01:00
{ .id = 0x10ec0668, .name = "ALC668", .patch = patch_alc662 },
ALSA: hda - Add ALC670 codec support - Fixed alc_subsystem_id( ) typo and add new function. - !(ass & 0x100000)) ==> Delete this check. It is unnecessary check. - Add porti - ALC670 support Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-25 08:36:52 +01:00
{ .id = 0x10ec0670, .name = "ALC670", .patch = patch_alc662 },
ALSA: hda - Support ALC680 codec Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-23 16:25:26 +02:00
{ .id = 0x10ec0680, .name = "ALC680", .patch = patch_alc680 },
[ALSA] hda-codec - Add ALC861VD/ALC660VD support o Added ALC861VD support to patch_realtek.c under hda-intel o Added ALC660VD as a model of 861VD o Added pci quirks for Asus G1 as well as for two devices found in Realtek's driver to point at ALC660VD model (3stack-660) o Added pci quirk for Lenovo 3000 C200 - although untested, it should work with ALC861VD 3stack model o Changed preset id = 0x10ec0660 to point at new patch_alc861vd instead of patch_861 o Organised the list of presets Signed-off-by: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-02 18:17:27 +01:00
{ .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{ .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 },
ALSA: hda - Merge patch_alc882() and patch_alc883() Merge patch_alc882() and patch_alc883() to the former one since both codecs have fairly similar connections but just a slight difference. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-30 15:28:30 +02:00
{ .id = 0x10ec0883, .name = "ALC883", .patch = patch_alc882 },
ALSA: hda - Fix another ALC889A (rev 0x100101) ALC889A hardware (id 0x10ec0885 rev 0x100101) to use patch_alc883 Signed-off-by: Clive Messer <clive@vacuumtube.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-30 15:49:13 +02:00
{ .id = 0x10ec0885, .rev = 0x100101, .name = "ALC889A",
ALSA: hda - Merge patch_alc882() and patch_alc883() Merge patch_alc882() and patch_alc883() to the former one since both codecs have fairly similar connections but just a slight difference. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-30 15:28:30 +02:00
.patch = patch_alc882 },
[ALSA] hda - Fix ALC889A codec support ALC889A is recognized ALC885/ALC882 but it's actually closer to ALC888/ALC883. Cc: Kasper Sandberg <lkml@metanurb.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-16 14:13:29 +02:00
{ .id = 0x10ec0885, .rev = 0x100103, .name = "ALC889A",
ALSA: hda - Merge patch_alc882() and patch_alc883() Merge patch_alc882() and patch_alc883() to the former one since both codecs have fairly similar connections but just a slight difference. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-30 15:28:30 +02:00
.patch = patch_alc882 },
[ALSA] hda-codec - Add the support of ALC262,ALC883,ALC885,ALC861 Modules: HDA Codec driver,HDA generic driver This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver More models and improvements for ALC880, ALC260 and ALC882 codecs, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-12-05 19:42:22 +01:00
{ .id = 0x10ec0885, .name = "ALC885", .patch = patch_alc882 },
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
{ .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc882 },
ALSA: hda - Add ALC1200 support Add ALC1200 codec support. Almost compatible with ALC888. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-15 11:18:05 +02:00
{ .id = 0x10ec0888, .rev = 0x100101, .name = "ALC1200",
ALSA: hda - Merge patch_alc882() and patch_alc883() Merge patch_alc882() and patch_alc883() to the former one since both codecs have fairly similar connections but just a slight difference. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-30 15:28:30 +02:00
.patch = patch_alc882 },
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
{ .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc882 },
ALSA: hda - Merge patch_alc882() and patch_alc883() Merge patch_alc882() and patch_alc883() to the former one since both codecs have fairly similar connections but just a slight difference. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-30 15:28:30 +02:00
{ .id = 0x10ec0889, .name = "ALC889", .patch = patch_alc882 },
ALSA: hda - Add ALC661/259, ALC892/888VD support Fixed List: 1. Add alc_read_coef_idx function 2. Add ALC661 ALC259 3. Add ALC892 ALC888VD Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-03 10:07:50 +01:00
{ .id = 0x10ec0892, .name = "ALC892", .patch = patch_alc662 },
ALSA: hda/realtek - Clean up codec renames Use a static table for detecting the codec renames. Also clean up the error paths in each patch_*() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17 16:39:09 +02:00
{ .id = 0x10ec0899, .name = "ALC898", .patch = patch_alc882 },
ALSA: hda - Add new codec ALC668 and ALC900 (default name ALC1150) Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-08 10:25:37 +01:00
{ .id = 0x10ec0900, .name = "ALC1150", .patch = patch_alc882 },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{} /* terminator */
};
ALSA: hda - Modularize HD-audio driver Split the monolithc HD-audio driver into several pieces: - snd-hda-intel HD-audio PCI controller driver; loaded via udev - snd-hda-codec HD-audio codec bus driver - snd-hda-codec-* Specific HD-audio codec drivers When built as modules, snd-hda-codec (that is invoked by snd-hda-intel) looks up the codec vendor ID and loads the corresponding codec module automatically via request_module(). When built in a kernel, each codec drivers are statically hooked up before probing the PCI. This patch adds appropriate EXPORT_SYMBOL_GPL()'s and the module information for each driver, and driver-linking codes between codec-bus and codec drivers. TODO: - Avoid EXPORT_SYMBOL*() when built-in kernel - Restore __devinit appropriately depending on the condition Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-27 15:47:11 +01:00
MODULE_ALIAS("snd-hda-codec-id:10ec*");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Realtek HD-audio codec");
static struct hda_codec_preset_list realtek_list = {
.preset = snd_hda_preset_realtek,
.owner = THIS_MODULE,
};
static int __init patch_realtek_init(void)
{
return snd_hda_add_codec_preset(&realtek_list);
}
static void __exit patch_realtek_exit(void)
{
snd_hda_delete_codec_preset(&realtek_list);
}
module_init(patch_realtek_init)
module_exit(patch_realtek_exit)
Reference in a new issue Copy permalink