linux-pinenote/drivers/net/arm/Kconfig

#
# Acorn Network device configuration
#  These are for Acorn's Expansion card network interfaces
#
config ARM_AM79C961A
	bool "ARM EBSA110 AM79C961A support"
	depends on ARM && ARCH_EBSA110
	select CRC32
	help
	  If you wish to compile a kernel for the EBSA-110, then you should
	  always answer Y to this.

config ARM_ETHER1
	tristate "Acorn Ether1 support"
	depends on ARM && ARCH_ACORN
	help
	  If you have an Acorn system with one of these (AKA25) network cards,
	  you should say Y to this option if you wish to use it with Linux.

config ARM_ETHER3
	tristate "Acorn/ANT Ether3 support"
	depends on ARM && ARCH_ACORN
	help
	  If you have an Acorn system with one of these network cards, you
	  should say Y to this option if you wish to use it with Linux.

config ARM_ETHERH
	tristate "I-cubed EtherH/ANT EtherM support"
	depends on ARM && ARCH_ACORN
	select CRC32
	help
	  If you have an Acorn system with one of these network cards, you
	  should say Y to this option if you wish to use it with Linux.

config ARM_AT91_ETHER
	tristate "AT91RM9200 Ethernet support"
	depends on ARM && ARCH_AT91RM9200
	select MII
	help
	  If you wish to compile a kernel for the AT91RM9200 and enable
	  ethernet support, then you should always answer Y to this.

config EP93XX_ETH
	tristate "EP93xx Ethernet support"
	depends on ARM && ARCH_EP93XX
	select MII
	help
	  This is a driver for the ethernet hardware included in EP93xx CPUs.
	  Say Y if you are building a kernel for EP93xx based devices.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00			`#`
			`# Acorn Network device configuration`
			`# These are for Acorn's Expansion card network interfaces`
			`#`
			`config ARM_AM79C961A`
			`bool "ARM EBSA110 AM79C961A support"`
Use menuconfig objects II - netdev (general+100mbit) CONFIG_NETDEVICES, CONFIG_NET_ETHERNET: Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. CONFIG_SMC9194: Move it so that it appears correctly in menuconfig. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-06-13 12:48:53 -07:00			`depends on ARM && ARCH_EBSA110`
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00			`select CRC32`
			`help`
			`If you wish to compile a kernel for the EBSA-110, then you should`
			`always answer Y to this.`

			`config ARM_ETHER1`
			`tristate "Acorn Ether1 support"`
Use menuconfig objects II - netdev (general+100mbit) CONFIG_NETDEVICES, CONFIG_NET_ETHERNET: Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. CONFIG_SMC9194: Move it so that it appears correctly in menuconfig. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-06-13 12:48:53 -07:00			`depends on ARM && ARCH_ACORN`
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00			`help`
			`If you have an Acorn system with one of these (AKA25) network cards,`
			`you should say Y to this option if you wish to use it with Linux.`

			`config ARM_ETHER3`
			`tristate "Acorn/ANT Ether3 support"`
Use menuconfig objects II - netdev (general+100mbit) CONFIG_NETDEVICES, CONFIG_NET_ETHERNET: Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. CONFIG_SMC9194: Move it so that it appears correctly in menuconfig. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-06-13 12:48:53 -07:00			`depends on ARM && ARCH_ACORN`
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00			`help`
			`If you have an Acorn system with one of these network cards, you`
			`should say Y to this option if you wish to use it with Linux.`

			`config ARM_ETHERH`
			`tristate "I-cubed EtherH/ANT EtherM support"`
Use menuconfig objects II - netdev (general+100mbit) CONFIG_NETDEVICES, CONFIG_NET_ETHERNET: Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. CONFIG_SMC9194: Move it so that it appears correctly in menuconfig. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-06-13 12:48:53 -07:00			`depends on ARM && ARCH_ACORN`
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00			`select CRC32`
			`help`
			`If you have an Acorn system with one of these network cards, you`
			`should say Y to this option if you wish to use it with Linux.`
[PATCH] AT91RM9200 Ethernet driver This patch adds support for the Ethernet controller integrated in the Atmel AT91RM9200 SoC processor. Changes since the previous submission (01/02/2006) are: - Make use of the clk.h clock infrastructure. - The multicast hash function is not crc32. [Patch by Pedro Perez] Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-03-24 11:50:17 +02:00
			`config ARM_AT91_ETHER`
			`tristate "AT91RM9200 Ethernet support"`
Use menuconfig objects II - netdev (general+100mbit) CONFIG_NETDEVICES, CONFIG_NET_ETHERNET: Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. CONFIG_SMC9194: Move it so that it appears correctly in menuconfig. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-06-13 12:48:53 -07:00			`depends on ARM && ARCH_AT91RM9200`
[PATCH] AT91RM9200 Ethernet driver This patch adds support for the Ethernet controller integrated in the Atmel AT91RM9200 SoC processor. Changes since the previous submission (01/02/2006) are: - Make use of the clk.h clock infrastructure. - The multicast hash function is not crc32. [Patch by Pedro Perez] Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-03-24 11:50:17 +02:00			`select MII`
			`help`
			`If you wish to compile a kernel for the AT91RM9200 and enable`
			`ethernet support, then you should always answer Y to this.`
[PATCH] Cirrus Logic ep93xx ethernet driver The Cirrus Logic ep93xx is an ARM SoC that includes an ethernet MAC -- this patch adds a driver for that ethernet MAC. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-09-22 02:28:13 +02:00
			`config EP93XX_ETH`
			`tristate "EP93xx Ethernet support"`
Use menuconfig objects II - netdev (general+100mbit) CONFIG_NETDEVICES, CONFIG_NET_ETHERNET: Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. CONFIG_SMC9194: Move it so that it appears correctly in menuconfig. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-06-13 12:48:53 -07:00			`depends on ARM && ARCH_EP93XX`
EP93XX_ETH must select MII CONFIG_EP93XX_ETH=y, CONFIG_MII=n results in an obvious link error. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-07-13 02:12:08 +02:00			`select MII`
[PATCH] Cirrus Logic ep93xx ethernet driver The Cirrus Logic ep93xx is an ARM SoC that includes an ethernet MAC -- this patch adds a driver for that ethernet MAC. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-09-22 02:28:13 +02:00			`help`
			`This is a driver for the ethernet hardware included in EP93xx CPUs.`
			`Say Y if you are building a kernel for EP93xx based devices.`