forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
linux-pinenote/drivers/usb/storage/Kconfig

151 lines
5 KiB
Text
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#
# USB Storage driver configuration
#
[PATCH] USB: make usb storage note visible in Kconfig the following patch splits the NOTE: in the Device Drivers->USB submenu of Kconfig thus making the whole of it readable on 600x800 terminals. (Otherwise, the line was too big and disappeared into nowhere.) Signed-off-by: Borislav Petkov <petkov@uni-muenster.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/storage/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
2005-09-28 18:06:04 +02:00
comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'"
comment "may also be needed; see USB_STORAGE Help for more information"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
depends on USB
config USB_STORAGE
tristate "USB Mass Storage support"
depends on USB
select SCSI
---help---
Say Y here if you want to connect USB mass storage devices to your
computer's USB port. This is the driver you need for USB
floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
USB flash devices, and memory sticks, along with
similar devices. This driver may also be used for some cameras
and card readers.
This option 'selects' (turns on, enables) 'SCSI', but you
probably also need 'SCSI device support: SCSI disk support'
(BLK_DEV_SD) for most USB storage devices.
To compile this driver as a module, choose M here: the
module will be called usb-storage.
config USB_STORAGE_DEBUG
bool "USB Mass Storage verbose debug"
depends on USB_STORAGE
help
Say Y here in order to have the USB Mass Storage code generate
verbose debugging messages.
config USB_STORAGE_DATAFAB
bool "Datafab Compact Flash Reader support (EXPERIMENTAL)"
depends on USB_STORAGE && EXPERIMENTAL
help
Support for certain Datafab CompactFlash readers.
Datafab has a web page at <http://www.datafabusa.com/>.
config USB_STORAGE_FREECOM
bool "Freecom USB/ATAPI Bridge support"
depends on USB_STORAGE
help
Support for the Freecom USB to IDE/ATAPI adaptor.
Freecom has a web page at <http://www.freecom.de/>.
config USB_STORAGE_ISD200
bool "ISD-200 USB/ATA Bridge support"
[PATCH] isd200: limit to BLK_DEV_IDE Limit USB_STORAGE_ISD200 to whatever BLK_DEV_IDE and USB_STORAGE are set to (y, m) since isd200 calls ide_fix_driveid() in the BLK_DEV_IDE code. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-05 12:03:45 -07:00
depends on USB_STORAGE
depends on BLK_DEV_IDE=y || BLK_DEV_IDE=USB_STORAGE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
---help---
Say Y here if you want to use USB Mass Store devices based
on the In-Systems Design ISD-200 USB/ATA bridge.
Some of the products that use this chip are:
- Archos Jukebox 6000
- ISD SmartCable for Storage
- Taiwan Skymaster CD530U/DEL-0241 IDE bridge
- Sony CRX10U CD-R/RW drive
- CyQ've CQ8060A CDRW drive
- Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
config USB_STORAGE_DPCM
bool "Microtech/ZiO! CompactFlash/SmartMedia support"
depends on USB_STORAGE
help
Say Y here to support the Microtech/ZiO! CompactFlash reader.
There is a web page at <http://www.ziocorp.com/products/>.
config USB_STORAGE_USBAT
bool "USBAT/USBAT02-based storage support (EXPERIMENTAL)"
depends on USB_STORAGE && EXPERIMENTAL
help
Say Y here to include additional code to support storage devices
based on the SCM/Shuttle USBAT/USBAT02 processors.
Devices reported to work with this driver include:
- CompactFlash reader included with Kodak DC3800 camera
- Dane-Elec Zmate CompactFlash reader
- Delkin Efilm reader2
- HP 8200e/8210e/8230e CD-Writer Plus drives
- I-JAM JS-50U
- Jessops CompactFlash JESDCFRU BLACK
- Kingston Technology PCREAD-USB/CF
- Maxell UA4 CompactFlash reader
- Memorex UCF-100
- Microtech ZiO! ICS-45 CF2
- RCA LYRA MP3 portable
- Sandisk ImageMate SDDR-05b
config USB_STORAGE_SDDR09
bool "SanDisk SDDR-09 (and other SmartMedia) support (EXPERIMENTAL)"
depends on USB_STORAGE && EXPERIMENTAL
help
Say Y here to include additional code to support the Sandisk SDDR-09
SmartMedia reader in the USB Mass Storage driver.
Also works for the Microtech Zio! SmartMedia reader.
config USB_STORAGE_SDDR55
bool "SanDisk SDDR-55 SmartMedia support (EXPERIMENTAL)"
depends on USB_STORAGE && EXPERIMENTAL
help
Say Y here to include additional code to support the Sandisk SDDR-55
SmartMedia reader in the USB Mass Storage driver.
config USB_STORAGE_JUMPSHOT
bool "Lexar Jumpshot Compact Flash Reader (EXPERIMENTAL)"
depends on USB_STORAGE && EXPERIMENTAL
help
Say Y here to include additional code to support the Lexar Jumpshot
USB CompactFlash reader.
[PATCH] USB Storage: add alauda support This patch adds another usb-storage subdriver, which supports two fairly old dual-XD/SmartMedia reader-writers (USB1.1 devices). This driver was written by Daniel Drake <dsd@gentoo.org> -- he notes that he wrote this driver without specs, however a vendor-supplied GPL driver for the previous generation of products ("sma03") did prove to be quite useful, as did the sddr09 driver which also has to deal with low-level physical block layout on SmartMedia. The original patch has been reformed by me, as it clashed with the libusual patches. We really need to consolidate some of this common SmartMedia code, and get together with the MTD guys to share it with them as well. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-12-04 22:02:44 -08:00
config USB_STORAGE_ALAUDA
bool "Olympus MAUSB-10/Fuji DPC-R1 support (EXPERIMENTAL)"
depends on USB_STORAGE && EXPERIMENTAL
help
Say Y here to include additional code to support the Olympus MAUSB-10
and Fujifilm DPC-R1 USB Card reader/writer devices.
These devices are based on the Alauda chip and support support both
XD and SmartMedia cards.
[PATCH] USB Storage: add support for Maxtor One-Touch button This patch is originally from Nick Sillik, and has been rediffed against the latest tree. This patch adds usability to the OneTouch Button on Maxtor External USB Hard Drives. Using an unusual device entry it declares an extra init function which claims the interrupt endpoint associated with this button. The button is connected to the input system. Signed-off-by: Nick Sillik <n.sillik@temple.edu> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-28 14:49:01 -07:00
config USB_STORAGE_ONETOUCH
bool "Support OneTouch Button on Maxtor Hard Drives (EXPERIMENTAL)"
[PATCH] USB: onetouch doesn't suspend yet The onetouch support doesn't suspend correctly (leaves an interrupt URB posted, instead of unlinking it) so for now just disable it when PM is in the air. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-17 09:47:28 -08:00
depends on USB_STORAGE && INPUT_EVDEV && EXPERIMENTAL && !PM
[PATCH] USB Storage: add support for Maxtor One-Touch button This patch is originally from Nick Sillik, and has been rediffed against the latest tree. This patch adds usability to the OneTouch Button on Maxtor External USB Hard Drives. Using an unusual device entry it declares an extra init function which claims the interrupt endpoint associated with this button. The button is connected to the input system. Signed-off-by: Nick Sillik <n.sillik@temple.edu> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-28 14:49:01 -07:00
help
Say Y here to include additional code to support the Maxtor OneTouch
USB hard drive's onetouch button.
This code registers the button on the front of Maxtor OneTouch USB
hard drive's as an input device. An action can be associated with
this input in any keybinding software. (e.g. gnome's keyboard short-
cuts)
[PATCH] USB: drivers/usb/storage/libusual This patch adds a shim driver libusual, which routes devices between usb-storage and ub according to the common table, based on unusual_devs.h. The help and example syntax is in Kconfig. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-22 20:15:09 -07:00
config USB_LIBUSUAL
bool "The shared table of common (or usual) storage devices"
depends on USB
help
This module contains a table of common (or usual) devices
for usb-storage and ub drivers, and allows to switch binding
of these devices without rebuilding modules.
Typical syntax of /etc/modprobe.conf is:
options libusual bias="ub"
If unsure, say N.
Reference in a new issue Copy permalink