forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
linux-pinenote/drivers/usb/net/Kconfig

305 lines
11 KiB
Text
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#
# USB Network devices configuration
#
comment "Networking support is needed for USB Network Adapter support"
depends on USB && !NET
menu "USB Network Adapters"
depends on USB && NET
config USB_CATC
tristate "USB CATC NetMate-based Ethernet device support (EXPERIMENTAL)"
depends on EXPERIMENTAL
select CRC32
---help---
Say Y if you want to use one of the following 10Mbps USB Ethernet
device based on the EL1210A chip. Supported devices are:
Belkin F5U011
Belkin F5U111
CATC NetMate
CATC NetMate II
smartBridges smartNIC
This driver makes the adapter appear as a normal Ethernet interface,
typically on eth0, if it is the only ethernet device, or perhaps on
eth1, if you have a PCI or ISA ethernet card installed.
To compile this driver as a module, choose M here: the
module will be called catc.
config USB_KAWETH
tristate "USB KLSI KL5USB101-based ethernet device support"
---help---
Say Y here if you want to use one of the following 10Mbps only
USB Ethernet adapters based on the KLSI KL5KUSB101B chipset:
3Com 3C19250
ADS USB-10BT
ATEN USB Ethernet
ASANTE USB To Ethernet Adapter
AOX Endpoints USB Ethernet
Correga K.K.
D-Link DSB-650C and DU-E10
Entrega / Portgear E45
I-O DATA USB-ET/T
Jaton USB Ethernet Device Adapter
Kingston Technology USB Ethernet Adapter
Linksys USB10T
Mobility USB-Ethernet Adapter
NetGear EA-101
Peracom Enet and Enet2
Portsmith Express Ethernet Adapter
Shark Pocket Adapter
SMC 2202USB
Sony Vaio port extender
This driver is likely to work with most 10Mbps only USB Ethernet
adapters, including some "no brand" devices. It does NOT work on
SmartBridges smartNIC or on Belkin F5U111 devices - you should use
the CATC NetMate driver for those. If you are not sure which one
you need, select both, and the correct one should be selected for
you.
This driver makes the adapter appear as a normal Ethernet interface,
typically on eth0, if it is the only ethernet device, or perhaps on
eth1, if you have a PCI or ISA ethernet card installed.
To compile this driver as a module, choose M here: the
module will be called kaweth.
config USB_PEGASUS
tristate "USB Pegasus/Pegasus-II based ethernet device support"
select MII
---help---
Say Y here if you know you have Pegasus or Pegasus-II based adapter.
If in doubt then look at <file:drivers/usb/net/pegasus.h> for the
complete list of supported devices.
If your particular adapter is not in the list and you are _sure_ it
is Pegasus or Pegasus II based then send me
<petkan@users.sourceforge.net> vendor and device IDs.
To compile this driver as a module, choose M here: the
module will be called pegasus.
config USB_RTL8150
tristate "USB RTL8150 based ethernet device support (EXPERIMENTAL)"
depends on EXPERIMENTAL
help
Say Y here if you have RTL8150 based usb-ethernet adapter.
Send me <petkan@users.sourceforge.net> any comments you may have.
You can also check for updates at <http://pegasus2.sourceforge.net/>.
To compile this driver as a module, choose M here: the
module will be called rtl8150.
config USB_USBNET
tristate "Multi-purpose USB Networking Framework"
---help---
This driver supports several kinds of network links over USB,
with "minidrivers" built around a common network driver core
that supports deep queues for efficient transfers. (This gives
better performance with small packets and at high speeds).
[PATCH] USB: usbnet (9/9) module for pl2301/2302 cables This wraps up the conversion of the "usbnet" driver structure, by moving the Prolific PL-2201/2302 minidriver to a module of its own. It also includes some minor cleanups to the remaining "usbnet" file, notably removing that long changelog at the top. Minor historical note: Linux 2.2 first called the driver for this hardware "plusb". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-31 09:54:50 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
The USB host runs "usbnet", and the other end of the link might be:
- Another USB host, when using USB "network" or "data transfer"
cables. These are often used to network laptops to PCs, like
"Laplink" parallel cables or some motherboards. These rely
on specialized chips from many suppliers.
- An intelligent USB gadget, perhaps embedding a Linux system.
These include PDAs running Linux (iPaq, Yopy, Zaurus, and
others), and devices that interoperate using the standard
CDC-Ethernet specification (including many cable modems).
- Network adapter hardware (like those for 10/100 Ethernet) which
uses this driver framework.
The link will appear with a name like "usb0", when the link is
a two-node link, or "eth0" for most CDC-Ethernet devices. Those
two-node links are most easily managed with Ethernet Bridging
(CONFIG_BRIDGE) instead of routing.
For more information see <http://www.linux-usb.org/usbnet/>.
To compile this driver as a module, choose M here: the
module will be called usbnet.
[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters This patch moves the ASIX AX8817x driver into its own file, just using the "usbnet" infrastructure as a utility library. - As with "cdc_subset" this involved minor Kconfig/kbuild tweaks, moving code from one file to another, and exporting a few functions. - This includes updates from Jamie Painter to add (and use) a new hook to handle the different maximum transfer sizes for rx and tx sides. - Also from Jamie, some bugfixes: * MDIO byteorder (to address some PPC media negotiation problems); * Force alignment at key spots when using ax88772 framing (on some embedded hardware, the network stack will break otherwise); * Address some link reset problems. It also makes this driver use the standard (5 seconds vs half second) control timeouts used elsewhere in USB; and wraps a few lines before the 80th column (which previously needed it). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-31 09:53:10 -07:00
config USB_NET_AX8817X
tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
depends on USB_USBNET && NET_ETHERNET
select CRC32
select MII
default y
help
This option adds support for ASIX AX88xxx based USB 2.0
[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters This patch moves the ASIX AX8817x driver into its own file, just using the "usbnet" infrastructure as a utility library. - As with "cdc_subset" this involved minor Kconfig/kbuild tweaks, moving code from one file to another, and exporting a few functions. - This includes updates from Jamie Painter to add (and use) a new hook to handle the different maximum transfer sizes for rx and tx sides. - Also from Jamie, some bugfixes: * MDIO byteorder (to address some PPC media negotiation problems); * Force alignment at key spots when using ax88772 framing (on some embedded hardware, the network stack will break otherwise); * Address some link reset problems. It also makes this driver use the standard (5 seconds vs half second) control timeouts used elsewhere in USB; and wraps a few lines before the 80th column (which previously needed it). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-31 09:53:10 -07:00
10/100 Ethernet adapters.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
This driver should work with at least the following devices:
* Aten UC210T
* ASIX AX88172
[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters This patch moves the ASIX AX8817x driver into its own file, just using the "usbnet" infrastructure as a utility library. - As with "cdc_subset" this involved minor Kconfig/kbuild tweaks, moving code from one file to another, and exporting a few functions. - This includes updates from Jamie Painter to add (and use) a new hook to handle the different maximum transfer sizes for rx and tx sides. - Also from Jamie, some bugfixes: * MDIO byteorder (to address some PPC media negotiation problems); * Force alignment at key spots when using ax88772 framing (on some embedded hardware, the network stack will break otherwise); * Address some link reset problems. It also makes this driver use the standard (5 seconds vs half second) control timeouts used elsewhere in USB; and wraps a few lines before the 80th column (which previously needed it). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-31 09:53:10 -07:00
* Billionton Systems, USB2AR
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
* Buffalo LUA-U2-KTX
* Corega FEther USB2-TX
* D-Link DUB-E100
* Hawking UF200
* Linksys USB200M
* Netgear FA120
* Sitecom LN-029
* Intellinet USB 2.0 Ethernet
* ST Lab USB 2.0 Ethernet
* TrendNet TU2-ET100
This driver creates an interface named "ethX", where X depends on
[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters This patch moves the ASIX AX8817x driver into its own file, just using the "usbnet" infrastructure as a utility library. - As with "cdc_subset" this involved minor Kconfig/kbuild tweaks, moving code from one file to another, and exporting a few functions. - This includes updates from Jamie Painter to add (and use) a new hook to handle the different maximum transfer sizes for rx and tx sides. - Also from Jamie, some bugfixes: * MDIO byteorder (to address some PPC media negotiation problems); * Force alignment at key spots when using ax88772 framing (on some embedded hardware, the network stack will break otherwise); * Address some link reset problems. It also makes this driver use the standard (5 seconds vs half second) control timeouts used elsewhere in USB; and wraps a few lines before the 80th column (which previously needed it). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-31 09:53:10 -07:00
what other networking devices you have in use.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] USB: usbnet (2/9) module for simple network links This patch creates the first of several separate "minidriver" modules for "usbnet". This one handles only the very simplest hardware, which can be handled almost entirely by the "usbnet" core. - Move device-specific bits into new "cdc_subset.c" driver, shrinking "usbnet" by a bunch; - Export the functions needed to support this minidriver (with EXPORT_SYMBOL_GPL); - Update Kconfig and kbuild accordingly. This one handles about a dozen different device types, with the most notable ones being Gumstix and most Linux-based PDAs (except Zaurus running that ancient code from Sharp). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-31 09:52:45 -07:00
[PATCH] USB: usbnet (7/9) module for CDC Ethernet Makes the CDC Ethernet support live in a separate driver module. This module is a bit special since it exports utility functions that are reused by the the Zaurus and RNDIS drivers, but it's not "core" like usbnet itself. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-31 09:54:20 -07:00
config USB_NET_CDCETHER
tristate "CDC Ethernet support (smart devices such as cable modems)"
depends on USB_USBNET
default y
help
This option supports devices conforming to the Communication Device
Class (CDC) Ethernet Control Model, a specification that's easy to
implement in device firmware. The CDC specifications are available
from <http://www.usb.org/>.
CDC Ethernet is an implementation option for DOCSIS cable modems
that support USB connectivity, used for non-Microsoft USB hosts.
The Linux-USB CDC Ethernet Gadget driver is an open implementation.
This driver should work with at least the following devices:
* Ericsson PipeRider (all variants)
* Motorola (DM100 and SB4100)
* Broadcom Cable Modem (reference design)
* Toshiba PCX1100U
* ...
This driver creates an interface named "ethX", where X depends on
what other networking devices you have in use. However, if the
IEEE 802 "local assignment" bit is set in the address, a "usbX"
name is used instead.
[PATCH] USB: usbnet (5/9) module for genesys gl620a cables This moves the GeneSys GL620USB-A support into its own driver file. It also fixes a "return wrong skb" glitch in the rx unbatching, as recently reported, and adds some missing byteswaps in the special "genelink" headers (so it might now work on big-endian Linux). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-31 09:53:42 -07:00
config USB_NET_GL620A
tristate "GeneSys GL620USB-A based cables"
depends on USB_USBNET
help
Choose this option if you're using a host-to-host cable,
or PC2PC motherboard, with this chip.
Note that the half-duplex "GL620USB" is not supported.
[PATCH] USB: usbnet (4/9) module for net1080 cables As with the "cdc_subset" and "asix" drivers, this just moves the net1080 support into its one driver module. In this case there's a small bit of extra cleanup involved, moving some funky framing logic into the tx_fixup() routine (resolving a long overdue FIXME). Minor historical note: "usbnet" started out as "net1080", then got generalized to make it easier for other network drivers to reuse the urb queueing and fault management code here. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-31 09:53:26 -07:00
config USB_NET_NET1080
tristate "NetChip 1080 based cables (Laplink, ...)"
default y
depends on USB_USBNET
help
Choose this option if you're using a host-to-host cable based
on this design: one NetChip 1080 chip and supporting logic,
optionally with LEDs that indicate traffic
[PATCH] USB: usbnet (9/9) module for pl2301/2302 cables This wraps up the conversion of the "usbnet" driver structure, by moving the Prolific PL-2201/2302 minidriver to a module of its own. It also includes some minor cleanups to the remaining "usbnet" file, notably removing that long changelog at the top. Minor historical note: Linux 2.2 first called the driver for this hardware "plusb". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-31 09:54:50 -07:00
config USB_NET_PLUSB
tristate "Prolific PL-2301/2302 based cables"
# if the handshake/init/reset problems, from original 'plusb',
# are ever resolved ... then remove "experimental"
depends on USB_USBNET && EXPERIMENTAL
help
Choose this option if you're using a host-to-host cable
with one of these chips.
[PATCH] USB: usbnet (8/9) module for RNDIS devices This adds host-side RNDIS support to the "usbnet" driver, so Linux can talk to various devices (often based on WinCE) that otherwise only Windows could talk to. Tested with little-endian Linux talking to a Linux-USB Ethernet/RNDIS based peripheral. This also includes updates from Eddie C. Dost <ecd@brainaid.de> for big-endian SPARC Linux talking to a Nokia 9500 Communicator. It's still marked as EXPERIMENTAL because this code is so young. This ought to let Linux to work with various cable modems that previously would have been "Windows Only". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-31 09:54:36 -07:00
config USB_NET_RNDIS_HOST
tristate "Host for RNDIS devices (EXPERIMENTAL)"
depends on USB_USBNET && EXPERIMENTAL
select USB_NET_CDCETHER
help
This option enables hosting "Remote NDIS" USB networking links,
as encouraged by Microsoft (instead of CDC Ethernet!) for use in
various devices that may only support this protocol.
Avoid using this protocol unless you have no better options.
The protocol specification is incomplete, and is controlled by
(and for) Microsoft; it isn't an "Open" ecosystem or market.
[PATCH] USB: usbnet (2/9) module for simple network links This patch creates the first of several separate "minidriver" modules for "usbnet". This one handles only the very simplest hardware, which can be handled almost entirely by the "usbnet" core. - Move device-specific bits into new "cdc_subset.c" driver, shrinking "usbnet" by a bunch; - Export the functions needed to support this minidriver (with EXPORT_SYMBOL_GPL); - Update Kconfig and kbuild accordingly. This one handles about a dozen different device types, with the most notable ones being Gumstix and most Linux-based PDAs (except Zaurus running that ancient code from Sharp). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-31 09:52:45 -07:00
config USB_NET_CDC_SUBSET
tristate "Simple USB Network Links (CDC Ethernet subset)"
depends on USB_USBNET
help
This driver module supports USB network devices that can work
without any device-specific information. Select it if you have
one of these drivers.
Note that while many USB host-to-host cables can work in this mode,
that may mean not being able to talk to Win32 systems or more
commonly not being able to handle certain events (like replugging
the host on the other end) very well. Also, these devices will
not generally have permanently assigned Ethernet addresses.
config USB_ALI_M5632
boolean "ALi M5632 based 'USB 2.0 Data Link' cables"
depends on USB_NET_CDC_SUBSET
help
Choose this option if you're using a host-to-host cable
based on this design, which supports USB 2.0 high speed.
config USB_AN2720
boolean "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
depends on USB_NET_CDC_SUBSET
help
Choose this option if you're using a host-to-host cable
based on this design. Note that AnchorChips is now a
Cypress brand.
config USB_BELKIN
boolean "eTEK based host-to-host cables (Advance, Belkin, ...)"
depends on USB_NET_CDC_SUBSET
default y
help
Choose this option if you're using a host-to-host cable
based on this design: two NetChip 2890 chips and an Atmel
microcontroller, with LEDs that indicate traffic.
config USB_ARMLINUX
boolean "Embedded ARM Linux links (iPaq, ...)"
depends on USB_NET_CDC_SUBSET
default y
help
Choose this option to support the "usb-eth" networking driver
used by most of the ARM Linux community with device controllers
such as the SA-11x0 and PXA-25x UDCs, or the tftp capabilities
in some PXA versions of the "blob" boot loader.
Linux-based "Gumstix" PXA-25x based systems use this protocol
to talk with other Linux systems.
Although the ROMs shipped with Sharp Zaurus products use a
different link level framing protocol, you can have them use
this simpler protocol by installing a different kernel.
config USB_EPSON2888
boolean "Epson 2888 based firmware (DEVELOPMENT)"
depends on USB_NET_CDC_SUBSET
help
Choose this option to support the usb networking links used
by some sample firmware from Epson.
[PATCH] USB: usbnet (6/9) module for Zaurii and compatibles This moves usbnet support for Zaurus and compatibles into its own module. Other than exporting a couple of helper functions, this just involved shuffling some code and updating the comments. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-31 09:53:58 -07:00
config USB_NET_ZAURUS
tristate "Sharp Zaurus (stock ROMs) and compatible"
depends on USB_USBNET
[PATCH] USB: usbnet (7/9) module for CDC Ethernet Makes the CDC Ethernet support live in a separate driver module. This module is a bit special since it exports utility functions that are reused by the the Zaurus and RNDIS drivers, but it's not "core" like usbnet itself. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-31 09:54:20 -07:00
select USB_NET_CDCETHER
[PATCH] USB: usbnet (6/9) module for Zaurii and compatibles This moves usbnet support for Zaurus and compatibles into its own module. Other than exporting a couple of helper functions, this just involved shuffling some code and updating the comments. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-31 09:53:58 -07:00
select CRC32
default y
help
Choose this option to support the usb networking links used by
Zaurus models like the SL-5000D, SL-5500, SL-5600, A-300, B-500.
This also supports some related device firmware, as used in some
PDAs from Olympus and some cell phones from Motorola.
[PATCH] USB: fix correct wording in drivers/usb/net/KConfig Signed-off-by: Koen Kooi <koen@handhelds.org>
2005-10-26 19:42:53 +02:00
If you install an alternate image, such as the Linux 2.6 based
[PATCH] USB: usbnet (6/9) module for Zaurii and compatibles This moves usbnet support for Zaurus and compatibles into its own module. Other than exporting a couple of helper functions, this just involved shuffling some code and updating the comments. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-31 09:53:58 -07:00
versions of OpenZaurus, you should no longer need to support this
protocol. Only the "eth-fd" or "net_fd" drivers in these devices
really need this non-conformant variant of CDC Ethernet (or in
some cases CDC MDLM) protocol, not "g_ether".
[PATCH] USB: usbnet (2/9) module for simple network links This patch creates the first of several separate "minidriver" modules for "usbnet". This one handles only the very simplest hardware, which can be handled almost entirely by the "usbnet" core. - Move device-specific bits into new "cdc_subset.c" driver, shrinking "usbnet" by a bunch; - Export the functions needed to support this minidriver (with EXPORT_SYMBOL_GPL); - Update Kconfig and kbuild accordingly. This one handles about a dozen different device types, with the most notable ones being Gumstix and most Linux-based PDAs (except Zaurus running that ancient code from Sharp). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-31 09:52:45 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
endmenu
Reference in a new issue Copy permalink