forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
linux-pinenote/drivers/clk/socfpga/clk-gate.c

263 lines
6.7 KiB
C
Raw Normal View History

clk: socfpga: split clk code Move the different kinds of clocks into their own files. The reason is to aid readability of the code. This also goes along with the other SoC-specific clock drivers. The split introduces new structs for the three types of clocks and uses them. Other changes are not done to the code. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-01-06 10:27:37 -06:00
/*
* Copyright 2011-2012 Calxeda, Inc.
* Copyright (C) 2012-2013 Altera Corporation <www.altera.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Based from clk-highbank.c
*
*/
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
clk: socfpga: Add a clk-phase property to the "altr,socfpga-gate-clk" The clk-phase property is used to represent the 2 clock phase values that is needed for the SD/MMC driver. Add a prepare function to the clk_ops, that will use the syscon driver to set sdmmc_clk's phase shift that is located in the system manager. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> --- v9: none v8: Use degrees in the clk-phase binding property v7: Add dts property to represent the clk phase of the sdmmc_clk. Add a prepare function to the gate clk that will toggle clock phase setting. Remove the "altr,socfpga-sdmmc-sdr-clk" clock type. v6: Add a new clock type "altr,socfpga-sdmmc-sdr-clk" that will be used to set the phase shift settings. v5: Use the "snps,dw-mshc" binding v4: Use the sdmmc_clk prepare function to set the phase shift settings v3: Not use the syscon driver because as of 3.13-rc1, the syscon driver is loaded after the clock driver. v2: Use the syscon driver
2014-01-06 12:17:24 -06:00
#include <linux/mfd/syscon.h>
clk: socfpga: split clk code Move the different kinds of clocks into their own files. The reason is to aid readability of the code. This also goes along with the other SoC-specific clock drivers. The split introduces new structs for the three types of clocks and uses them. Other changes are not done to the code. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-01-06 10:27:37 -06:00
#include <linux/of.h>
clk: socfpga: Add a clk-phase property to the "altr,socfpga-gate-clk" The clk-phase property is used to represent the 2 clock phase values that is needed for the SD/MMC driver. Add a prepare function to the clk_ops, that will use the syscon driver to set sdmmc_clk's phase shift that is located in the system manager. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> --- v9: none v8: Use degrees in the clk-phase binding property v7: Add dts property to represent the clk phase of the sdmmc_clk. Add a prepare function to the gate clk that will toggle clock phase setting. Remove the "altr,socfpga-sdmmc-sdr-clk" clock type. v6: Add a new clock type "altr,socfpga-sdmmc-sdr-clk" that will be used to set the phase shift settings. v5: Use the "snps,dw-mshc" binding v4: Use the sdmmc_clk prepare function to set the phase shift settings v3: Not use the syscon driver because as of 3.13-rc1, the syscon driver is loaded after the clock driver. v2: Use the syscon driver
2014-01-06 12:17:24 -06:00
#include <linux/regmap.h>
clk: socfpga: split clk code Move the different kinds of clocks into their own files. The reason is to aid readability of the code. This also goes along with the other SoC-specific clock drivers. The split introduces new structs for the three types of clocks and uses them. Other changes are not done to the code. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-01-06 10:27:37 -06:00
#include "clk.h"
#define SOCFPGA_L4_MP_CLK "l4_mp_clk"
#define SOCFPGA_L4_SP_CLK "l4_sp_clk"
#define SOCFPGA_NAND_CLK "nand_clk"
#define SOCFPGA_NAND_X_CLK "nand_x_clk"
#define SOCFPGA_MMC_CLK "sdmmc_clk"
#define SOCFPGA_GPIO_DB_CLK_OFFSET 0xA8
#define streq(a, b) (strcmp((a), (b)) == 0)
#define to_socfpga_gate_clk(p) container_of(p, struct socfpga_gate_clk, hw.hw)
clk: socfpga: Add a clk-phase property to the "altr,socfpga-gate-clk" The clk-phase property is used to represent the 2 clock phase values that is needed for the SD/MMC driver. Add a prepare function to the clk_ops, that will use the syscon driver to set sdmmc_clk's phase shift that is located in the system manager. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> --- v9: none v8: Use degrees in the clk-phase binding property v7: Add dts property to represent the clk phase of the sdmmc_clk. Add a prepare function to the gate clk that will toggle clock phase setting. Remove the "altr,socfpga-sdmmc-sdr-clk" clock type. v6: Add a new clock type "altr,socfpga-sdmmc-sdr-clk" that will be used to set the phase shift settings. v5: Use the "snps,dw-mshc" binding v4: Use the sdmmc_clk prepare function to set the phase shift settings v3: Not use the syscon driver because as of 3.13-rc1, the syscon driver is loaded after the clock driver. v2: Use the syscon driver
2014-01-06 12:17:24 -06:00
/* SDMMC Group for System Manager defines */
#define SYSMGR_SDMMCGRP_CTRL_OFFSET 0x108
#define SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel) \
((((smplsel) & 0x7) << 3) | (((drvsel) & 0x7) << 0))
clk: socfpga: split clk code Move the different kinds of clocks into their own files. The reason is to aid readability of the code. This also goes along with the other SoC-specific clock drivers. The split introduces new structs for the three types of clocks and uses them. Other changes are not done to the code. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-01-06 10:27:37 -06:00
static u8 socfpga_clk_get_parent(struct clk_hw *hwclk)
{
u32 l4_src;
u32 perpll_src;
if (streq(hwclk->init->name, SOCFPGA_L4_MP_CLK)) {
l4_src = readl(clk_mgr_base_addr + CLKMGR_L4SRC);
return l4_src &= 0x1;
}
if (streq(hwclk->init->name, SOCFPGA_L4_SP_CLK)) {
l4_src = readl(clk_mgr_base_addr + CLKMGR_L4SRC);
return !!(l4_src & 2);
}
perpll_src = readl(clk_mgr_base_addr + CLKMGR_PERPLL_SRC);
if (streq(hwclk->init->name, SOCFPGA_MMC_CLK))
return perpll_src &= 0x3;
if (streq(hwclk->init->name, SOCFPGA_NAND_CLK) ||
streq(hwclk->init->name, SOCFPGA_NAND_X_CLK))
return (perpll_src >> 2) & 3;
/* QSPI clock */
return (perpll_src >> 4) & 3;
}
static int socfpga_clk_set_parent(struct clk_hw *hwclk, u8 parent)
{
u32 src_reg;
if (streq(hwclk->init->name, SOCFPGA_L4_MP_CLK)) {
src_reg = readl(clk_mgr_base_addr + CLKMGR_L4SRC);
src_reg &= ~0x1;
src_reg |= parent;
writel(src_reg, clk_mgr_base_addr + CLKMGR_L4SRC);
} else if (streq(hwclk->init->name, SOCFPGA_L4_SP_CLK)) {
src_reg = readl(clk_mgr_base_addr + CLKMGR_L4SRC);
src_reg &= ~0x2;
src_reg |= (parent << 1);
writel(src_reg, clk_mgr_base_addr + CLKMGR_L4SRC);
} else {
src_reg = readl(clk_mgr_base_addr + CLKMGR_PERPLL_SRC);
if (streq(hwclk->init->name, SOCFPGA_MMC_CLK)) {
src_reg &= ~0x3;
src_reg |= parent;
} else if (streq(hwclk->init->name, SOCFPGA_NAND_CLK) ||
streq(hwclk->init->name, SOCFPGA_NAND_X_CLK)) {
src_reg &= ~0xC;
src_reg |= (parent << 2);
} else {/* QSPI clock */
src_reg &= ~0x30;
src_reg |= (parent << 4);
}
writel(src_reg, clk_mgr_base_addr + CLKMGR_PERPLL_SRC);
}
return 0;
}
static unsigned long socfpga_clk_recalc_rate(struct clk_hw *hwclk,
unsigned long parent_rate)
{
struct socfpga_gate_clk *socfpgaclk = to_socfpga_gate_clk(hwclk);
u32 div = 1, val;
if (socfpgaclk->fixed_div)
div = socfpgaclk->fixed_div;
else if (socfpgaclk->div_reg) {
val = readl(socfpgaclk->div_reg) >> socfpgaclk->shift;
val &= div_mask(socfpgaclk->width);
/* Check for GPIO_DB_CLK by its offset */
if ((int) socfpgaclk->div_reg & SOCFPGA_GPIO_DB_CLK_OFFSET)
div = val + 1;
else
div = (1 << val);
}
return parent_rate / div;
}
clk: socfpga: Add a clk-phase property to the "altr,socfpga-gate-clk" The clk-phase property is used to represent the 2 clock phase values that is needed for the SD/MMC driver. Add a prepare function to the clk_ops, that will use the syscon driver to set sdmmc_clk's phase shift that is located in the system manager. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> --- v9: none v8: Use degrees in the clk-phase binding property v7: Add dts property to represent the clk phase of the sdmmc_clk. Add a prepare function to the gate clk that will toggle clock phase setting. Remove the "altr,socfpga-sdmmc-sdr-clk" clock type. v6: Add a new clock type "altr,socfpga-sdmmc-sdr-clk" that will be used to set the phase shift settings. v5: Use the "snps,dw-mshc" binding v4: Use the sdmmc_clk prepare function to set the phase shift settings v3: Not use the syscon driver because as of 3.13-rc1, the syscon driver is loaded after the clock driver. v2: Use the syscon driver
2014-01-06 12:17:24 -06:00
static int socfpga_clk_prepare(struct clk_hw *hwclk)
{
struct socfpga_gate_clk *socfpgaclk = to_socfpga_gate_clk(hwclk);
struct regmap *sys_mgr_base_addr;
int i;
u32 hs_timing;
u32 clk_phase[2];
if (socfpgaclk->clk_phase[0] || socfpgaclk->clk_phase[1]) {
sys_mgr_base_addr = syscon_regmap_lookup_by_compatible("altr,sys-mgr");
if (IS_ERR(sys_mgr_base_addr)) {
pr_err("%s: failed to find altr,sys-mgr regmap!\n", __func__);
return -EINVAL;
}
for (i = 0; i < 2; i++) {
switch (socfpgaclk->clk_phase[i]) {
case 0:
clk_phase[i] = 0;
break;
case 45:
clk_phase[i] = 1;
break;
case 90:
clk_phase[i] = 2;
break;
case 135:
clk_phase[i] = 3;
break;
case 180:
clk_phase[i] = 4;
break;
case 225:
clk_phase[i] = 5;
break;
case 270:
clk_phase[i] = 6;
break;
case 315:
clk_phase[i] = 7;
break;
default:
clk_phase[i] = 0;
break;
}
}
hs_timing = SYSMGR_SDMMC_CTRL_SET(clk_phase[0], clk_phase[1]);
regmap_write(sys_mgr_base_addr, SYSMGR_SDMMCGRP_CTRL_OFFSET,
hs_timing);
}
return 0;
}
clk: socfpga: split clk code Move the different kinds of clocks into their own files. The reason is to aid readability of the code. This also goes along with the other SoC-specific clock drivers. The split introduces new structs for the three types of clocks and uses them. Other changes are not done to the code. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-01-06 10:27:37 -06:00
static struct clk_ops gateclk_ops = {
clk: socfpga: Add a clk-phase property to the "altr,socfpga-gate-clk" The clk-phase property is used to represent the 2 clock phase values that is needed for the SD/MMC driver. Add a prepare function to the clk_ops, that will use the syscon driver to set sdmmc_clk's phase shift that is located in the system manager. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> --- v9: none v8: Use degrees in the clk-phase binding property v7: Add dts property to represent the clk phase of the sdmmc_clk. Add a prepare function to the gate clk that will toggle clock phase setting. Remove the "altr,socfpga-sdmmc-sdr-clk" clock type. v6: Add a new clock type "altr,socfpga-sdmmc-sdr-clk" that will be used to set the phase shift settings. v5: Use the "snps,dw-mshc" binding v4: Use the sdmmc_clk prepare function to set the phase shift settings v3: Not use the syscon driver because as of 3.13-rc1, the syscon driver is loaded after the clock driver. v2: Use the syscon driver
2014-01-06 12:17:24 -06:00
.prepare = socfpga_clk_prepare,
clk: socfpga: split clk code Move the different kinds of clocks into their own files. The reason is to aid readability of the code. This also goes along with the other SoC-specific clock drivers. The split introduces new structs for the three types of clocks and uses them. Other changes are not done to the code. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-01-06 10:27:37 -06:00
.recalc_rate = socfpga_clk_recalc_rate,
.get_parent = socfpga_clk_get_parent,
.set_parent = socfpga_clk_set_parent,
};
static void __init __socfpga_gate_init(struct device_node *node,
const struct clk_ops *ops)
{
u32 clk_gate[2];
u32 div_reg[3];
clk: socfpga: Add a clk-phase property to the "altr,socfpga-gate-clk" The clk-phase property is used to represent the 2 clock phase values that is needed for the SD/MMC driver. Add a prepare function to the clk_ops, that will use the syscon driver to set sdmmc_clk's phase shift that is located in the system manager. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> --- v9: none v8: Use degrees in the clk-phase binding property v7: Add dts property to represent the clk phase of the sdmmc_clk. Add a prepare function to the gate clk that will toggle clock phase setting. Remove the "altr,socfpga-sdmmc-sdr-clk" clock type. v6: Add a new clock type "altr,socfpga-sdmmc-sdr-clk" that will be used to set the phase shift settings. v5: Use the "snps,dw-mshc" binding v4: Use the sdmmc_clk prepare function to set the phase shift settings v3: Not use the syscon driver because as of 3.13-rc1, the syscon driver is loaded after the clock driver. v2: Use the syscon driver
2014-01-06 12:17:24 -06:00
u32 clk_phase[2];
clk: socfpga: split clk code Move the different kinds of clocks into their own files. The reason is to aid readability of the code. This also goes along with the other SoC-specific clock drivers. The split introduces new structs for the three types of clocks and uses them. Other changes are not done to the code. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-01-06 10:27:37 -06:00
u32 fixed_div;
struct clk *clk;
struct socfpga_gate_clk *socfpga_clk;
const char *clk_name = node->name;
const char *parent_name[SOCFPGA_MAX_PARENTS];
struct clk_init_data init;
int rc;
int i = 0;
socfpga_clk = kzalloc(sizeof(*socfpga_clk), GFP_KERNEL);
if (WARN_ON(!socfpga_clk))
return;
rc = of_property_read_u32_array(node, "clk-gate", clk_gate, 2);
if (rc)
clk_gate[0] = 0;
if (clk_gate[0]) {
socfpga_clk->hw.reg = clk_mgr_base_addr + clk_gate[0];
socfpga_clk->hw.bit_idx = clk_gate[1];
gateclk_ops.enable = clk_gate_ops.enable;
gateclk_ops.disable = clk_gate_ops.disable;
}
rc = of_property_read_u32(node, "fixed-divider", &fixed_div);
if (rc)
socfpga_clk->fixed_div = 0;
else
socfpga_clk->fixed_div = fixed_div;
rc = of_property_read_u32_array(node, "div-reg", div_reg, 3);
if (!rc) {
socfpga_clk->div_reg = clk_mgr_base_addr + div_reg[0];
socfpga_clk->shift = div_reg[1];
socfpga_clk->width = div_reg[2];
} else {
socfpga_clk->div_reg = 0;
}
clk: socfpga: Add a clk-phase property to the "altr,socfpga-gate-clk" The clk-phase property is used to represent the 2 clock phase values that is needed for the SD/MMC driver. Add a prepare function to the clk_ops, that will use the syscon driver to set sdmmc_clk's phase shift that is located in the system manager. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> --- v9: none v8: Use degrees in the clk-phase binding property v7: Add dts property to represent the clk phase of the sdmmc_clk. Add a prepare function to the gate clk that will toggle clock phase setting. Remove the "altr,socfpga-sdmmc-sdr-clk" clock type. v6: Add a new clock type "altr,socfpga-sdmmc-sdr-clk" that will be used to set the phase shift settings. v5: Use the "snps,dw-mshc" binding v4: Use the sdmmc_clk prepare function to set the phase shift settings v3: Not use the syscon driver because as of 3.13-rc1, the syscon driver is loaded after the clock driver. v2: Use the syscon driver
2014-01-06 12:17:24 -06:00
rc = of_property_read_u32_array(node, "clk-phase", clk_phase, 2);
if (!rc) {
socfpga_clk->clk_phase[0] = clk_phase[0];
socfpga_clk->clk_phase[1] = clk_phase[1];
}
clk: socfpga: split clk code Move the different kinds of clocks into their own files. The reason is to aid readability of the code. This also goes along with the other SoC-specific clock drivers. The split introduces new structs for the three types of clocks and uses them. Other changes are not done to the code. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-01-06 10:27:37 -06:00
of_property_read_string(node, "clock-output-names", &clk_name);
init.name = clk_name;
init.ops = ops;
init.flags = 0;
while (i < SOCFPGA_MAX_PARENTS && (parent_name[i] =
of_clk_get_parent_name(node, i)) != NULL)
i++;
init.parent_names = parent_name;
init.num_parents = i;
socfpga_clk->hw.hw.init = &init;
clk = clk_register(NULL, &socfpga_clk->hw.hw);
if (WARN_ON(IS_ERR(clk))) {
kfree(socfpga_clk);
return;
}
rc = of_clk_add_provider(node, of_clk_src_simple_get, clk);
if (WARN_ON(rc))
return;
}
void __init socfpga_gate_init(struct device_node *node)
{
__socfpga_gate_init(node, &gateclk_ops);
}
Reference in a new issue Copy permalink