forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
linux-pinenote/drivers/usb/otg/Makefile

22 lines
649 B
Makefile
Raw Normal View History

USB: otg: gpio_vbus transceiver stub gpio_vbus provides simple GPIO VBUS sensing for peripheral controllers with an internal transceiver. Optionally, a second GPIO can be used to control D+ pullup. It also interfaces with the regulator framework to limit charging currents when powered via USB. gpio_vbus requests the regulator supplying "vbus_draw" and can enable/disable it or limit its current depending on USB state. [dbrownell@users.sourceforge.net: use drivers/otg, cleanups ] Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-24 12:00:01 -08:00
#
# OTG infrastructure and transceiver drivers
#
usb: makefile cleanup For all modules, change <module>-objs to <module>-y; remove if-statements and replace with lists using the kbuild idiom; move flags to the top of the file; and fix alignment while trying to maintain the original scheme in each file. None of the dependencies are modified. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-06 19:03:26 -07:00
ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
ccflags-$(CONFIG_USB_GADGET_DEBUG) += -DDEBUG
USB: otg: sharable otg transceiver ops Move otg_get/set/put_transceiver() from omap specific code to common otg.c so other upcoming drivers can share them. [ dbrownell@users.sourceforge.net: move to drivers/usb/otg, dox ] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <me@felipebalbi.com> Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-24 12:02:21 -08:00
# infrastructure
obj-$(CONFIG_USB_OTG_UTILS) += otg.o
# transceiver drivers
USB: otg: gpio_vbus transceiver stub gpio_vbus provides simple GPIO VBUS sensing for peripheral controllers with an internal transceiver. Optionally, a second GPIO can be used to control D+ pullup. It also interfaces with the regulator framework to limit charging currents when powered via USB. gpio_vbus requests the regulator supplying "vbus_draw" and can enable/disable it or limit its current depending on USB state. [dbrownell@users.sourceforge.net: use drivers/otg, cleanups ] Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-24 12:00:01 -08:00
obj-$(CONFIG_USB_GPIO_VBUS) += gpio_vbus.o
USB: move isp1301_omap to drivers/usb/otg This moves the isp1301-omap driver from the drivers/i2c/chips directory (which will be shrinking) into a new drivers/usb/otg directory (which will grow, with more drivers and utilities). Note that OTG infrastructure needs to be initialized before either host or peripheral side USB support, and may be needed before for pure host or pure peripheral configurations. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-24 11:53:35 -08:00
obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
USB: otg: twl4030 transceiver driver Add driver for the high speed USB-OTG transceiver in TI's TWL4030 family of chips. Given this and various other pending patches, OMAP3 hardware like that from beagleboard.org, gumstix.com (Overo), and openpandora.org should now have basic USB host and peripheral connectivity with mainline kernels. Ditto for less widely-available boards. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-18 12:25:44 -08:00
obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o
usb: otg: TWL6030: Add twl6030_usb file for compilation Add the twl6030_usb transceiver file for compilation. Signed-off-by: Hema HK <hemahk@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 18:10:37 +05:30
obj-$(CONFIG_TWL6030_USB) += twl6030-usb.o
usb: Add Intel Langwell USB OTG Transceiver Driver This adds support for the USB transceiver driver in the Langwell chipset used on the Intel MID platforms. It folds up the original patch set which includes basic support for the device, PHY low power mode (Please notice that there is a limitation, after we drive VBus down, 2ms delay is required from SCU FW to sync up OTGSC register with USBCFG register), software timers (the hardware timers do not work in low power mode), HNP, SRP. Signed-off-by: Hao Wu <hao.wu@intel.com> Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-05 14:17:28 +01:00
obj-$(CONFIG_USB_LANGWELL_OTG) += langwell_otg.o
USB: otg: adding nop usb transceiver NOP transceiver is used by all the usb transceiver which are mostly autonomous and doesn't require any programming or which are built into the usb ip itself.NOP transceiver only allocates the memory for struct xceiv and calls otg_set_transceiver() so function call to otg_get_transceiver() will return a valid transceiver. NOP transceiver device should be registered by calling usb_nop_xceiv_register() from platform files. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-06 17:32:35 +05:30
obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o
USB OTG: Add generic driver for ULPI OTG transceiver This adds a minimal generic driver for ULPI connected transceivers, using the OTG framework functions recently introduced. The driver got a table to match the ULPI chips, which currently only has one entry for NXP's ISP 1504 transceiver. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Heikki Krogerus <ext-heikki.krogerus@nokia.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-15 17:09:35 +03:00
obj-$(CONFIG_USB_ULPI) += ulpi.o
usb: otg: Add ulpi viewport access ops Add generic access ops for controllers with a ulpi viewport register (e.g. Chipidea/ARC based controllers). Signed-off-by: Benoit Goby <benoit@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-09 16:28:54 -08:00
obj-$(CONFIG_USB_ULPI_VIEWPORT) += ulpi_viewport.o
USB: Rename "msm72k_otg.c" to "msm_otg.c" This driver is used across all MSM SoCs. Hence give a generic name. All Functions and strutures are also using "msm_otg" as prefix. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-04 22:45:02 +05:30
obj-$(CONFIG_USB_MSM_OTG) += msm_otg.o
usb: add ab8500 usb transceiver driver Basic driver for ab8500 usb otg transceiver TODO: -Regulators support -Host and OTG testing -Interface with PRCMU -Charging support Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-07 15:00:09 +01:00
obj-$(CONFIG_AB8500_USB) += ab8500-usb.o
Reference in a new issue Copy permalink