48 lines
		
	
	
	
		
			1.8 KiB
			
		
	
	
	
		
			Text
		
	
	
	
	
	
		
		
			
		
	
	
			48 lines
		
	
	
	
		
			1.8 KiB
			
		
	
	
	
		
			Text
		
	
	
	
	
	
|   | The SA1100 serial port had its major/minor numbers officially assigned: | ||
|  | 
 | ||
|  | > Date: Sun, 24 Sep 2000 21:40:27 -0700 | ||
|  | > From: H. Peter Anvin <hpa@transmeta.com> | ||
|  | > To: Nicolas Pitre <nico@CAM.ORG> | ||
|  | > Cc: Device List Maintainer <device@lanana.org> | ||
|  | > Subject: Re: device | ||
|  | >  | ||
|  | > Okay.  Note that device numbers 204 and 205 are used for "low density | ||
|  | > serial devices", so you will have a range of minors on those majors (the | ||
|  | > tty device layer handles this just fine, so you don't have to worry about | ||
|  | > doing anything special.) | ||
|  | >  | ||
|  | > So your assignments are: | ||
|  | >  | ||
|  | > 204 char        Low-density serial ports | ||
|  | >                   5 = /dev/ttySA0               SA1100 builtin serial port 0 | ||
|  | >                   6 = /dev/ttySA1               SA1100 builtin serial port 1 | ||
|  | >                   7 = /dev/ttySA2               SA1100 builtin serial port 2 | ||
|  | >  | ||
|  | > 205 char        Low-density serial ports (alternate device) | ||
|  | >                   5 = /dev/cusa0                Callout device for ttySA0 | ||
|  | >                   6 = /dev/cusa1                Callout device for ttySA1 | ||
|  | >                   7 = /dev/cusa2                Callout device for ttySA2 | ||
|  | > | ||
|  | 
 | ||
|  | If you're not using devfs, you must create those inodes in /dev | ||
|  | on the root filesystem used by your SA1100-based device: | ||
|  | 
 | ||
|  | 	mknod ttySA0 c 204 5 | ||
|  | 	mknod ttySA1 c 204 6 | ||
|  | 	mknod ttySA2 c 204 7 | ||
|  | 	mknod cusa0 c 205 5 | ||
|  | 	mknod cusa1 c 205 6 | ||
|  | 	mknod cusa2 c 205 7 | ||
|  | 
 | ||
|  | In addition to the creation of the appropriate device nodes above, you | ||
|  | must ensure your user space applications make use of the correct device | ||
|  | name. The classic example is the content of the /etc/inittab file where | ||
|  | you might have a getty process started on ttyS0.  In this case: | ||
|  | 
 | ||
|  | - replace occurrences of ttyS0 with ttySA0, ttyS1 with ttySA1, etc. | ||
|  | 
 | ||
|  | - don't forget to add 'ttySA0', 'console', or the appropriate tty name | ||
|  |   in /etc/securetty for root to be allowed to login as well. | ||
|  | 
 | ||
|  | 
 |