42 lines
		
	
	
	
		
			1.7 KiB
			
		
	
	
	
		
			Text
		
	
	
	
	
	
		
		
			
		
	
	
			42 lines
		
	
	
	
		
			1.7 KiB
			
		
	
	
	
		
			Text
		
	
	
	
	
	
|   | The PSS cards and other ECHO based cards provide an onboard DSP with  | ||
|  | downloadable programs and also has an AD1848 "Microsoft Sound System"  | ||
|  | device. The PSS driver enables MSS and MPU401 modes of the card. SB  | ||
|  | is not enabled since it doesn't work concurrently with MSS.  | ||
|  | 
 | ||
|  | If you build this driver as a module then the driver takes the following | ||
|  | parameters | ||
|  | 
 | ||
|  | pss_io. 	The I/O base the PSS card is configured at (normally 0x220 | ||
|  | 		or 0x240) | ||
|  | 
 | ||
|  | mss_io		The base address of the Microsoft Sound System interface. | ||
|  | 		This is normally 0x530, but may be 0x604 or other addresses. | ||
|  | 
 | ||
|  | mss_irq		The interrupt assigned to the Microsoft Sound System | ||
|  | 		emulation. IRQ's 3,5,7,9,10,11 and 12 are available. If you | ||
|  | 		get IRQ errors be sure to check the interrupt is set to  | ||
|  | 		"ISA/Legacy" in the BIOS on modern machines. | ||
|  | 
 | ||
|  | mss_dma		The DMA channel used by the Microsoft Sound System. | ||
|  | 		This can be 0, 1, or 3. DMA 0 is not available on older  | ||
|  | 		machines and will cause a crash on them. | ||
|  | 
 | ||
|  | mpu_io		The MPU emulation base address. This sets the base of the | ||
|  | 		synthesizer. It is typically 0x330 but can be altered. | ||
|  | 
 | ||
|  | mpu_irq		The interrupt to use for the synthesizer. It must differ | ||
|  | 		from the IRQ used by the Microsoft Sound System port. | ||
|  | 
 | ||
|  | 
 | ||
|  | The mpu_io/mpu_irq fields are optional. If they are not specified the  | ||
|  | synthesizer parts are not configured. | ||
|  | 
 | ||
|  | When the module is loaded it looks for a file called  | ||
|  | /etc/sound/pss_synth. This is the firmware file from the DOS install disks. | ||
|  | This fil holds a general MIDI emulation. The file expected is called | ||
|  | genmidi.ld on newer DOS driver install disks and synth.ld on older ones. | ||
|  | 
 | ||
|  | You can also load alternative DSP algorithms into the card if you wish. One | ||
|  | alternative driver can be found at http://www.mpg123.de/ | ||
|  | 
 |