linux-pinenote/drivers/reset/Makefile

obj-$(CONFIG_RESET_CONTROLLER) += core.o
obj-$(CONFIG_ARCH_LPC18XX) += reset-lpc18xx.o
obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
obj-$(CONFIG_ARCH_STI) += sti/
obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o
obj-$(CONFIG_ATH79) += reset-ath79.o
reset: Add reset controller API This adds a simple API for devices to request being reset by separate reset controller hardware and implements the reset signal device tree binding. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Pavel Machek <pavel@ucw.cz> 2012-11-19 17:23:13 +01:00			`obj-$(CONFIG_RESET_CONTROLLER) += core.o`
reset: add driver for lpc18xx rgu Add reset driver for the Reset Generation Unit (RGU) found on NXP LPC18xx and LPC43xx devies. This reset controller features up to 64 reset lines connected to different blocks and peripheral in the SoC. Most reset lines on the controller are self clearing except for those dealing with the Cortex-M0 cores on LPC43xx devices. This driver also registers a restart handler that can be used to reset the entire device. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> 2015-05-06 00:10:26 +02:00			`obj-$(CONFIG_ARCH_LPC18XX) += reset-lpc18xx.o`
reset: add driver for socfpga Add a reset-controller driver for the socfpga platform. The reset-controller has four banks with up to 32 entries all encapsulated in one module block. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com> --- Notes: Changes since v2: - remove superfluous ret in probe function - add Acked-by Changes since v1: - use BITS_PER_LONG everywhere instead of MAX_BANK_WIDTH - print pdev->dev.of_node->full_name on error - use proper IS_ERR/PTR_ERR 2014-04-15 17:06:44 -05:00			`obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o`
reset: add the Berlin reset controller driver Add a reset controller for Marvell Berlin SoCs which is used by the USB PHYs drivers (for now). Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> 2014-09-03 09:48:20 +02:00			`obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o`
reset: Add Allwinner SoCs Reset Controller Driver The Allwinner A31 and most of the other Allwinner SoCs have an IP maintaining a few other IPs in the SoC in reset by default. Among these IPs are the A31's High Speed Timers, hence why we can't use the regular driver construct in every cases, and need to call the registering function directly during machine initialisation. Apart from this, the implementation is fairly straightforward, and could easily be moved to a generic MMIO-based reset controller driver if the need ever arise. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> 2013-09-24 11:07:43 +03:00			`obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o`
drivers: reset: STi SoC system configuration reset controller support This patch adds a reset controller implementation for STMicroelectronics STi family SoCs; it allows a group of related reset like controls found in multiple system configuration registers to be represented by a single controller device. System configuration registers are accessed through the regmap framework and the mfd/syscon driver. The implementation optionally supports waiting for the reset action to be acknowledged in a separate status register and supports both active high and active low reset lines. These properties are common across all the reset channels in a specific reset controller instance, hence all channels in a paritcular controller are expected to behave in the same way. Signed-off-by: Stephen Gallimore <stephen.gallimore@st.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> 2013-08-07 15:53:12 +01:00			`obj-$(CONFIG_ARCH_STI) += sti/`
reset: reset-zynq: Adding support for Xilinx Zynq reset controller. This adds a reset controller driver to control the Xilinx Zynq AP-SoC's various resets. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> 2015-07-30 18:13:56 -07:00			`obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o`
reset: Add a driver for the reset controller on the AR71XX/AR9XXX The AR71XX/AR9XXX SoC have a simple reset controller with one bit per reset line. Signed-off-by: Alban Bedel <albeu@free.fr> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> 2015-08-03 19:23:52 +02:00			`obj-$(CONFIG_ATH79) += reset-ath79.o`