forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
linux-pinenote/arch/um/sys-x86_64/shared/sysdep/ptrace.h

240 lines
7.4 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* Copyright 2003 PathScale, Inc.
uml: throw out CONFIG_MODE_TT This patchset throws out tt mode, which has been non-functional for a while. This is done in phases, interspersed with code cleanups on the affected files. The removal is done as follows: remove all code, config options, and files which depend on CONFIG_MODE_TT get rid of the CHOOSE_MODE macro, which decided whether to call tt-mode or skas-mode code, and replace invocations with their skas portions replace all now-trivial procedures with their skas equivalents There are now a bunch of now-redundant pieces of data structures, including mode-specific pieces of the thread structure, pt_regs, and mm_context. These are all replaced with their skas-specific contents. As part of the ongoing style compliance project, I made a style pass over all files that were changed. There are three such patches, one for each phase, covering the files affected by that phase but no later ones. I noticed that we weren't freeing the LDT state associated with a process when it exited, so that's fixed in one of the later patches. The last patch is a tidying patch which I've had for a while, but which caused inexplicable crashes under tt mode. Since that is no longer a problem, this can now go in. This patch: Start getting rid of tt mode support. This patch throws out CONFIG_MODE_TT and all config options, code, and files which depend on it. CONFIG_MODE_SKAS is gone and everything that depends on it is included unconditionally. The few changed lines are in re-written Kconfig help, lines which needed something skas-related removed from them, and a few more which weren't strictly deletions. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:26:50 -07:00
* Copyright (C) 2003 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
*
* Licensed under the GPL
*/
#ifndef __SYSDEP_X86_64_PTRACE_H
#define __SYSDEP_X86_64_PTRACE_H
#include "user_constants.h"
[PATCH] uml: S390 preparation, abstract host page fault data This patch removes the arch-specific fault/trap-infos from thread and skas-regs. It adds a new struct faultinfo, that is arch-specific defined in sysdep/faultinfo.h. The structure is inserted in thread.arch and thread.regs.skas and thread.regs.tt Now, segv and other trap-handlers can copy the contents from regs.X.faultinfo to thread.arch.faultinfo with one simple assignment. Also, the number of macros necessary is reduced to FAULT_ADDRESS(struct faultinfo) extracts the faulting address from faultinfo FAULT_WRITE(struct faultinfo) extracts the "is_write" flag SEGV_IS_FIXABLE(struct faultinfo) is true for the fixable segvs, i.e. (TRAP == 14) on i386 UPT_FAULTINFO(regs) result is (struct faultinfo *) to the faultinfo in regs->skas.faultinfo GET_FAULTINFO_FROM_SC(struct faultinfo, struct sigcontext *) copies the relevant parts of the sigcontext to struct faultinfo. On SIGSEGV, call user_signal() instead of handle_segv(), if the architecture provides the information needed in PTRACE_FAULTINFO, or if PTRACE_FAULTINFO is missing, because segv-stub will provide the info. The benefit of the change is, that in case of a non-fixable SIGSEGV, we can give user processes a SIGSEGV, instead of possibly looping on pagefault handling. Since handle_segv() sikked arch_fixup() implicitly by passing ip==0 to segv(), I changed segv() to call arch_fixup() only, if !is_user. Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:15:31 -07:00
#include "sysdep/faultinfo.h"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#define MAX_REG_OFFSET (UM_FRAME_SIZE)
#define MAX_REG_NR ((MAX_REG_OFFSET) / sizeof(unsigned long))
#include "skas_ptregs.h"
#define REGS_IP(r) ((r)[HOST_IP])
#define REGS_SP(r) ((r)[HOST_SP])
#define REGS_RBX(r) ((r)[HOST_RBX])
#define REGS_RCX(r) ((r)[HOST_RCX])
#define REGS_RDX(r) ((r)[HOST_RDX])
#define REGS_RSI(r) ((r)[HOST_RSI])
#define REGS_RDI(r) ((r)[HOST_RDI])
#define REGS_RBP(r) ((r)[HOST_RBP])
#define REGS_RAX(r) ((r)[HOST_RAX])
#define REGS_R8(r) ((r)[HOST_R8])
#define REGS_R9(r) ((r)[HOST_R9])
#define REGS_R10(r) ((r)[HOST_R10])
#define REGS_R11(r) ((r)[HOST_R11])
#define REGS_R12(r) ((r)[HOST_R12])
#define REGS_R13(r) ((r)[HOST_R13])
#define REGS_R14(r) ((r)[HOST_R14])
#define REGS_R15(r) ((r)[HOST_R15])
#define REGS_CS(r) ((r)[HOST_CS])
#define REGS_EFLAGS(r) ((r)[HOST_EFLAGS])
#define REGS_SS(r) ((r)[HOST_SS])
#define HOST_FS_BASE 21
#define HOST_GS_BASE 22
#define HOST_DS 23
#define HOST_ES 24
#define HOST_FS 25
#define HOST_GS 26
[PATCH] uml: fix missing x86_64 register definitions The UML/x86_64 headers were missing ptrace support for some segment registers. The underlying problem was that the x86_64 kernel uses user_regs_struct rather than the ptrace register definitions in ptrace. This patch switches UML/x86_64 to using user_regs_struct for its definitions of the host's registers. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 01:50:35 -07:00
/* Also defined in asm/ptrace-x86_64.h, but not in libc headers. So, these
* are already defined for kernel code, but not for userspace code.
*/
#ifndef FS_BASE
/* These aren't defined in ptrace.h, but exist in struct user_regs_struct,
* which is what x86_64 ptrace actually uses.
*/
#define FS_BASE (HOST_FS_BASE * sizeof(long))
#define GS_BASE (HOST_GS_BASE * sizeof(long))
#define DS (HOST_DS * sizeof(long))
#define ES (HOST_ES * sizeof(long))
#define FS (HOST_FS * sizeof(long))
#define GS (HOST_GS * sizeof(long))
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#define REGS_FS_BASE(r) ((r)[HOST_FS_BASE])
#define REGS_GS_BASE(r) ((r)[HOST_GS_BASE])
#define REGS_DS(r) ((r)[HOST_DS])
#define REGS_ES(r) ((r)[HOST_ES])
#define REGS_FS(r) ((r)[HOST_FS])
#define REGS_GS(r) ((r)[HOST_GS])
#define REGS_ORIG_RAX(r) ((r)[HOST_ORIG_RAX])
#define REGS_SET_SYSCALL_RETURN(r, res) REGS_RAX(r) = (res)
#define REGS_RESTART_SYSCALL(r) IP_RESTART_SYSCALL(REGS_IP(r))
#define REGS_SEGV_IS_FIXABLE(r) SEGV_IS_FIXABLE((r)->trap_type)
#define REGS_FAULT_ADDR(r) ((r)->fault_addr)
#define REGS_FAULT_WRITE(r) FAULT_WRITE((r)->fault_type)
#define REGS_TRAP(r) ((r)->trap_type)
#define REGS_ERR(r) ((r)->fault_type)
uml: remove code made redundant by CHOOSE_MODE removal This patch makes a number of simplifications enabled by the removal of CHOOSE_MODE. There were lots of functions that looked like int foo(args){ foo_skas(args); } The bodies of foo_skas are now folded into foo, and their declarations (and sometimes entire header files) are deleted. In addition, the union uml_pt_regs, which was a union between the tt and skas register formats, is now a struct, with the tt-mode arm of the union being removed. It turns out that usr2_handler was unused, so it is gone. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:26:58 -07:00
struct uml_pt_regs {
uml: rename pt_regs general-purpose register file Before the removal of tt mode, access to a register on the skas-mode side of a pt_regs struct looked like pt_regs.regs.skas.regs.regs[FOO]. This was bad enough, but it became pt_regs.regs.regs.regs[FOO] with the removal of the union from the middle. To get rid of the run of three "regs", the last field is renamed to "gp". Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:27:07 -07:00
unsigned long gp[MAX_REG_NR];
uml: remove code made redundant by CHOOSE_MODE removal This patch makes a number of simplifications enabled by the removal of CHOOSE_MODE. There were lots of functions that looked like int foo(args){ foo_skas(args); } The bodies of foo_skas are now folded into foo, and their declarations (and sometimes entire header files) are deleted. In addition, the union uml_pt_regs, which was a union between the tt and skas register formats, is now a struct, with the tt-mode arm of the union being removed. It turns out that usr2_handler was unused, so it is gone. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:26:58 -07:00
struct faultinfo faultinfo;
long syscall;
int is_user;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
};
#define EMPTY_UML_PT_REGS { }
uml: rename pt_regs general-purpose register file Before the removal of tt mode, access to a register on the skas-mode side of a pt_regs struct looked like pt_regs.regs.skas.regs.regs[FOO]. This was bad enough, but it became pt_regs.regs.regs.regs[FOO] with the removal of the union from the middle. To get rid of the run of three "regs", the last field is renamed to "gp". Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:27:07 -07:00
#define UPT_RBX(r) REGS_RBX((r)->gp)
#define UPT_RCX(r) REGS_RCX((r)->gp)
#define UPT_RDX(r) REGS_RDX((r)->gp)
#define UPT_RSI(r) REGS_RSI((r)->gp)
#define UPT_RDI(r) REGS_RDI((r)->gp)
#define UPT_RBP(r) REGS_RBP((r)->gp)
#define UPT_RAX(r) REGS_RAX((r)->gp)
#define UPT_R8(r) REGS_R8((r)->gp)
#define UPT_R9(r) REGS_R9((r)->gp)
#define UPT_R10(r) REGS_R10((r)->gp)
#define UPT_R11(r) REGS_R11((r)->gp)
#define UPT_R12(r) REGS_R12((r)->gp)
#define UPT_R13(r) REGS_R13((r)->gp)
#define UPT_R14(r) REGS_R14((r)->gp)
#define UPT_R15(r) REGS_R15((r)->gp)
#define UPT_CS(r) REGS_CS((r)->gp)
#define UPT_FS_BASE(r) REGS_FS_BASE((r)->gp)
#define UPT_FS(r) REGS_FS((r)->gp)
#define UPT_GS_BASE(r) REGS_GS_BASE((r)->gp)
#define UPT_GS(r) REGS_GS((r)->gp)
#define UPT_DS(r) REGS_DS((r)->gp)
#define UPT_ES(r) REGS_ES((r)->gp)
#define UPT_CS(r) REGS_CS((r)->gp)
#define UPT_SS(r) REGS_SS((r)->gp)
#define UPT_ORIG_RAX(r) REGS_ORIG_RAX((r)->gp)
#define UPT_IP(r) REGS_IP((r)->gp)
#define UPT_SP(r) REGS_SP((r)->gp)
#define UPT_EFLAGS(r) REGS_EFLAGS((r)->gp)
uml: remove code made redundant by CHOOSE_MODE removal This patch makes a number of simplifications enabled by the removal of CHOOSE_MODE. There were lots of functions that looked like int foo(args){ foo_skas(args); } The bodies of foo_skas are now folded into foo, and their declarations (and sometimes entire header files) are deleted. In addition, the union uml_pt_regs, which was a union between the tt and skas register formats, is now a struct, with the tt-mode arm of the union being removed. It turns out that usr2_handler was unused, so it is gone. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:26:58 -07:00
#define UPT_SYSCALL_NR(r) ((r)->syscall)
[PATCH] uml: small fixes left over from rc4 Some changes that I sent in didn't make 2.6.12-rc4 for some reason. This adds them back. We have an x86_64 definition of TOP_ADDR a reimplementation of the x86_64 csum_partial_copy_from_user some syntax fixes in arch/um/kernel/ptrace.c removal of a CFLAGS definition in the x86_64 Makefile some include changes in the x86_64 ptrace.c and user-offsets.h a syntax fix in elf-x86_64.h Also moved an include in the i386 and x86_64 Makefiles to make the symlinks work, and some small fixes from Al Viro. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-20 13:59:07 -07:00
#define UPT_SYSCALL_RET(r) UPT_RAX(r)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern int user_context(unsigned long sp);
uml: remove code made redundant by CHOOSE_MODE removal This patch makes a number of simplifications enabled by the removal of CHOOSE_MODE. There were lots of functions that looked like int foo(args){ foo_skas(args); } The bodies of foo_skas are now folded into foo, and their declarations (and sometimes entire header files) are deleted. In addition, the union uml_pt_regs, which was a union between the tt and skas register formats, is now a struct, with the tt-mode arm of the union being removed. It turns out that usr2_handler was unused, so it is gone. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:26:58 -07:00
#define UPT_IS_USER(r) ((r)->is_user)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#define UPT_SYSCALL_ARG1(r) UPT_RDI(r)
#define UPT_SYSCALL_ARG2(r) UPT_RSI(r)
#define UPT_SYSCALL_ARG3(r) UPT_RDX(r)
#define UPT_SYSCALL_ARG4(r) UPT_R10(r)
#define UPT_SYSCALL_ARG5(r) UPT_R8(r)
#define UPT_SYSCALL_ARG6(r) UPT_R9(r)
struct syscall_args {
unsigned long args[6];
};
#define SYSCALL_ARGS(r) ((struct syscall_args) \
uml: remove os_* usage from userspace files This patch fixes some userspace files which were calling libc through the os_* wrappers. It turns out that there was only one user of os_new_tty_pgrp, so it can be deleted. There are also some style and whitespace fixes in here. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:27:08 -07:00
{ .args = { UPT_SYSCALL_ARG1(r), \
UPT_SYSCALL_ARG2(r), \
UPT_SYSCALL_ARG3(r), \
UPT_SYSCALL_ARG4(r), \
UPT_SYSCALL_ARG5(r), \
UPT_SYSCALL_ARG6(r) } } )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#define UPT_REG(regs, reg) \
uml: remove os_* usage from userspace files This patch fixes some userspace files which were calling libc through the os_* wrappers. It turns out that there was only one user of os_new_tty_pgrp, so it can be deleted. There are also some style and whitespace fixes in here. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:27:08 -07:00
({ unsigned long val; \
switch(reg){ \
case R8: val = UPT_R8(regs); break; \
case R9: val = UPT_R9(regs); break; \
case R10: val = UPT_R10(regs); break; \
case R11: val = UPT_R11(regs); break; \
case R12: val = UPT_R12(regs); break; \
case R13: val = UPT_R13(regs); break; \
case R14: val = UPT_R14(regs); break; \
case R15: val = UPT_R15(regs); break; \
case RIP: val = UPT_IP(regs); break; \
case RSP: val = UPT_SP(regs); break; \
case RAX: val = UPT_RAX(regs); break; \
case RBX: val = UPT_RBX(regs); break; \
case RCX: val = UPT_RCX(regs); break; \
case RDX: val = UPT_RDX(regs); break; \
case RSI: val = UPT_RSI(regs); break; \
case RDI: val = UPT_RDI(regs); break; \
case RBP: val = UPT_RBP(regs); break; \
case ORIG_RAX: val = UPT_ORIG_RAX(regs); break; \
case CS: val = UPT_CS(regs); break; \
case SS: val = UPT_SS(regs); break; \
case FS_BASE: val = UPT_FS_BASE(regs); break; \
case GS_BASE: val = UPT_GS_BASE(regs); break; \
case DS: val = UPT_DS(regs); break; \
case ES: val = UPT_ES(regs); break; \
case FS : val = UPT_FS (regs); break; \
case GS: val = UPT_GS(regs); break; \
case EFLAGS: val = UPT_EFLAGS(regs); break; \
default : \
panic("Bad register in UPT_REG : %d\n", reg); \
val = -1; \
} \
val; \
})
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#define UPT_SET(regs, reg, val) \
uml: remove os_* usage from userspace files This patch fixes some userspace files which were calling libc through the os_* wrappers. It turns out that there was only one user of os_new_tty_pgrp, so it can be deleted. There are also some style and whitespace fixes in here. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:27:08 -07:00
({ unsigned long __upt_val = val; \
switch(reg){ \
case R8: UPT_R8(regs) = __upt_val; break; \
case R9: UPT_R9(regs) = __upt_val; break; \
case R10: UPT_R10(regs) = __upt_val; break; \
case R11: UPT_R11(regs) = __upt_val; break; \
case R12: UPT_R12(regs) = __upt_val; break; \
case R13: UPT_R13(regs) = __upt_val; break; \
case R14: UPT_R14(regs) = __upt_val; break; \
case R15: UPT_R15(regs) = __upt_val; break; \
case RIP: UPT_IP(regs) = __upt_val; break; \
case RSP: UPT_SP(regs) = __upt_val; break; \
case RAX: UPT_RAX(regs) = __upt_val; break; \
case RBX: UPT_RBX(regs) = __upt_val; break; \
case RCX: UPT_RCX(regs) = __upt_val; break; \
case RDX: UPT_RDX(regs) = __upt_val; break; \
case RSI: UPT_RSI(regs) = __upt_val; break; \
case RDI: UPT_RDI(regs) = __upt_val; break; \
case RBP: UPT_RBP(regs) = __upt_val; break; \
case ORIG_RAX: UPT_ORIG_RAX(regs) = __upt_val; break; \
case CS: UPT_CS(regs) = __upt_val; break; \
case SS: UPT_SS(regs) = __upt_val; break; \
case FS_BASE: UPT_FS_BASE(regs) = __upt_val; break; \
case GS_BASE: UPT_GS_BASE(regs) = __upt_val; break; \
case DS: UPT_DS(regs) = __upt_val; break; \
case ES: UPT_ES(regs) = __upt_val; break; \
case FS: UPT_FS(regs) = __upt_val; break; \
case GS: UPT_GS(regs) = __upt_val; break; \
case EFLAGS: UPT_EFLAGS(regs) = __upt_val; break; \
default : \
panic("Bad register in UPT_SET : %d\n", reg); \
break; \
} \
__upt_val; \
})
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#define UPT_SET_SYSCALL_RETURN(r, res) \
uml: remove code made redundant by CHOOSE_MODE removal This patch makes a number of simplifications enabled by the removal of CHOOSE_MODE. There were lots of functions that looked like int foo(args){ foo_skas(args); } The bodies of foo_skas are now folded into foo, and their declarations (and sometimes entire header files) are deleted. In addition, the union uml_pt_regs, which was a union between the tt and skas register formats, is now a struct, with the tt-mode arm of the union being removed. It turns out that usr2_handler was unused, so it is gone. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:26:58 -07:00
REGS_SET_SYSCALL_RETURN((r)->regs, (res))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
uml: rename pt_regs general-purpose register file Before the removal of tt mode, access to a register on the skas-mode side of a pt_regs struct looked like pt_regs.regs.skas.regs.regs[FOO]. This was bad enough, but it became pt_regs.regs.regs.regs[FOO] with the removal of the union from the middle. To get rid of the run of three "regs", the last field is renamed to "gp". Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:27:07 -07:00
#define UPT_RESTART_SYSCALL(r) REGS_RESTART_SYSCALL((r)->gp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
uml: throw out CHOOSE_MODE The next stage after removing code which depends on CONFIG_MODE_TT is removing the CHOOSE_MODE abstraction, which provided both compile-time and run-time branching to either tt-mode or skas-mode code. This patch removes choose-mode.h and all inclusions of it, and replaces all CHOOSE_MODE invocations with the skas branch. This leaves a number of trivial functions which will be dealt with in a later patch. There are some changes in the uaccess and tls support which go somewhat beyond this and eliminate some of the now-redundant functions. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:26:56 -07:00
#define UPT_SEGV_IS_FIXABLE(r) REGS_SEGV_IS_FIXABLE(&r->skas)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
uml: remove code made redundant by CHOOSE_MODE removal This patch makes a number of simplifications enabled by the removal of CHOOSE_MODE. There were lots of functions that looked like int foo(args){ foo_skas(args); } The bodies of foo_skas are now folded into foo, and their declarations (and sometimes entire header files) are deleted. In addition, the union uml_pt_regs, which was a union between the tt and skas register formats, is now a struct, with the tt-mode arm of the union being removed. It turns out that usr2_handler was unused, so it is gone. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:26:58 -07:00
#define UPT_FAULTINFO(r) (&(r)->faultinfo)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
uml: floating point signal delivery fixes Handle floating point state in across signals correctly. UML/i386 needs to know whether the host does PTRACE_[GS]ETFPXREGS, so an arch_init_registers hook is added, which on x86_64 does nothing. UML doesn't save and restore floating point registers on kernel entry and exit, so they need to be copied between the host process and the sigcontext. save_fpx_registers and restore_fpx_registers are added for this purpose. save_fp_registers and restore_fp_registers already exist. There was a bunch of floating point state conversion code in arch/um/sys-i386/ptrace.c which isn't needed there, but is needed in signal.c, so it is moved over. The i386 code now distinguishes between fp and fpx state and handles them correctly. The x86_64 code just needs to copy state as-is between the host process and the stack. There are also some fixes there to pass the correct address of the floating point state around. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:27:15 -07:00
static inline void arch_init_registers(int pid)
{
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#endif
Reference in a new issue Copy permalink