linux-pinenote/tools/testing/selftests/powerpc/tm/Makefile

TEST_PROGS := tm-resched-dscr

all: $(TEST_PROGS)

$(TEST_PROGS): ../harness.c

tm-syscall: tm-syscall-asm.S
tm-syscall: CFLAGS += -mhtm

include ../../lib.mk

clean:
	rm -f $(TEST_PROGS) *.o
Revert "powerpc/tm: Abort syscalls in active transactions" This reverts commit feba40362b11341bee6d8ed58d54b896abbd9f84. Although the principle of this change is good, the implementation has a few issues. Firstly we can sometimes fail to abort a syscall because r12 may have been clobbered by C code if we went down the virtual CPU accounting path, or if syscall tracing was enabled. Secondly we have decided that it is safer to abort the syscall even earlier in the syscall entry path, so that we avoid the syscall tracing path when we are transactional. So that we have time to thoroughly test those changes we have decided to revert this for this merge window and will merge the fixed version in the next window. NB. Rather than reverting the selftest we just drop tm-syscall from TEST_PROGS so that it's not run by default. Fixes: feba40362b11 ("powerpc/tm: Abort syscalls in active transactions") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 2015-04-30 15:13:14 +10:00			`TEST_PROGS := tm-resched-dscr`
powerpc: Correct DSCR during TM context switch Correct the DSCR SPR becoming temporarily corrupted if a task is context switched during a transaction. The problem occurs while suspending the task and is caused by saving the DSCR to thread.dscr after it has already been set to the CPU's default value: __switch_to() calls __switch_to_tm() which calls tm_reclaim_task() which calls tm_reclaim_thread() which calls tm_reclaim() where the DSCR is set to the CPU's default __switch_to() calls _switch() where thread.dscr is set to the DSCR When the task is resumed, it's transaction will be doomed (as usual) and the DSCR SPR will be corrupted, although the checkpointed value will be correct. Therefore the DSCR will be immediately corrected by the transaction aborting, unless it has been suspended. In that case the incorrect value can be seen by the task until it resumes the transaction. The fix is to treat the DSCR similarly to the TAR and save it early in __switch_to(). A program exposing the problem is added to the kernel self tests as: tools/testing/selftests/powerpc/tm/tm-resched-dscr. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> CC: <stable@vger.kernel.org> [v3.10+] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 2014-06-05 16:19:22 +10:00
selftests: Add install support for the powerpc tests The bulk of the selftests are actually below the powerpc sub directory. This adds support for installing them, when on a powerpc machine, or if ARCH and CROSS_COMPILE are set appropriately. This is a little more complicated because of the sub directory structure under powerpc, but much of the common logic in lib.mk is still used. The net effect of the patch is still a reduction in code. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> 2015-03-11 15:06:01 +11:00			`all: $(TEST_PROGS)`
powerpc: Correct DSCR during TM context switch Correct the DSCR SPR becoming temporarily corrupted if a task is context switched during a transaction. The problem occurs while suspending the task and is caused by saving the DSCR to thread.dscr after it has already been set to the CPU's default value: __switch_to() calls __switch_to_tm() which calls tm_reclaim_task() which calls tm_reclaim_thread() which calls tm_reclaim() where the DSCR is set to the CPU's default __switch_to() calls _switch() where thread.dscr is set to the DSCR When the task is resumed, it's transaction will be doomed (as usual) and the DSCR SPR will be corrupted, although the checkpointed value will be correct. Therefore the DSCR will be immediately corrected by the transaction aborting, unless it has been suspended. In that case the incorrect value can be seen by the task until it resumes the transaction. The fix is to treat the DSCR similarly to the TAR and save it early in __switch_to(). A program exposing the problem is added to the kernel self tests as: tools/testing/selftests/powerpc/tm/tm-resched-dscr. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> CC: <stable@vger.kernel.org> [v3.10+] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 2014-06-05 16:19:22 +10:00
selftests: Add install support for the powerpc tests The bulk of the selftests are actually below the powerpc sub directory. This adds support for installing them, when on a powerpc machine, or if ARCH and CROSS_COMPILE are set appropriately. This is a little more complicated because of the sub directory structure under powerpc, but much of the common logic in lib.mk is still used. The net effect of the patch is still a reduction in code. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> 2015-03-11 15:06:01 +11:00			`$(TEST_PROGS): ../harness.c`
powerpc: Correct DSCR during TM context switch Correct the DSCR SPR becoming temporarily corrupted if a task is context switched during a transaction. The problem occurs while suspending the task and is caused by saving the DSCR to thread.dscr after it has already been set to the CPU's default value: __switch_to() calls __switch_to_tm() which calls tm_reclaim_task() which calls tm_reclaim_thread() which calls tm_reclaim() where the DSCR is set to the CPU's default __switch_to() calls _switch() where thread.dscr is set to the DSCR When the task is resumed, it's transaction will be doomed (as usual) and the DSCR SPR will be corrupted, although the checkpointed value will be correct. Therefore the DSCR will be immediately corrected by the transaction aborting, unless it has been suspended. In that case the incorrect value can be seen by the task until it resumes the transaction. The fix is to treat the DSCR similarly to the TAR and save it early in __switch_to(). A program exposing the problem is added to the kernel self tests as: tools/testing/selftests/powerpc/tm/tm-resched-dscr. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> CC: <stable@vger.kernel.org> [v3.10+] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 2014-06-05 16:19:22 +10:00
selftests/powerpc: Add transactional syscall test Check that a syscall made during an active transaction will fail with the correct failure code and that one made during a suspended transaction will succeed. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 2015-04-10 14:16:49 +10:00			`tm-syscall: tm-syscall-asm.S`
			`tm-syscall: CFLAGS += -mhtm`

selftests: Add install support for the powerpc tests The bulk of the selftests are actually below the powerpc sub directory. This adds support for installing them, when on a powerpc machine, or if ARCH and CROSS_COMPILE are set appropriately. This is a little more complicated because of the sub directory structure under powerpc, but much of the common logic in lib.mk is still used. The net effect of the patch is still a reduction in code. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> 2015-03-11 15:06:01 +11:00			`include ../../lib.mk`
powerpc: Correct DSCR during TM context switch Correct the DSCR SPR becoming temporarily corrupted if a task is context switched during a transaction. The problem occurs while suspending the task and is caused by saving the DSCR to thread.dscr after it has already been set to the CPU's default value: __switch_to() calls __switch_to_tm() which calls tm_reclaim_task() which calls tm_reclaim_thread() which calls tm_reclaim() where the DSCR is set to the CPU's default __switch_to() calls _switch() where thread.dscr is set to the DSCR When the task is resumed, it's transaction will be doomed (as usual) and the DSCR SPR will be corrupted, although the checkpointed value will be correct. Therefore the DSCR will be immediately corrected by the transaction aborting, unless it has been suspended. In that case the incorrect value can be seen by the task until it resumes the transaction. The fix is to treat the DSCR similarly to the TAR and save it early in __switch_to(). A program exposing the problem is added to the kernel self tests as: tools/testing/selftests/powerpc/tm/tm-resched-dscr. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> CC: <stable@vger.kernel.org> [v3.10+] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 2014-06-05 16:19:22 +10:00
			`clean:`
selftests: Add install support for the powerpc tests The bulk of the selftests are actually below the powerpc sub directory. This adds support for installing them, when on a powerpc machine, or if ARCH and CROSS_COMPILE are set appropriately. This is a little more complicated because of the sub directory structure under powerpc, but much of the common logic in lib.mk is still used. The net effect of the patch is still a reduction in code. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> 2015-03-11 15:06:01 +11:00			`rm -f $(TEST_PROGS) *.o`