linux-pinenote/drivers/clk/sunxi/Makefile

#
# Makefile for sunxi specific clk
#

obj-y += clk-sunxi.o clk-factors.o
obj-y += clk-a10-hosc.o
obj-y += clk-a20-gmac.o
obj-y += clk-mod0.o
obj-y += clk-sun8i-mbus.o
obj-y += clk-sun9i-core.o
obj-y += clk-sun9i-mmc.o
obj-y += clk-usb.o

obj-$(CONFIG_MFD_SUN6I_PRCM) += \
	clk-sun6i-ar100.o clk-sun6i-apb0.o clk-sun6i-apb0-gates.o \
	clk-sun8i-apb0.o
clk: arm: sunxi: Add a new clock driver for sunxi SOCs This commit implements the base CPU clocks for sunxi devices. It has been tested using a slightly modified cpufreq driver from the linux-sunxi 3.0 tree. Additionally, document the new bindings introduced by this patch. Idling: / # cat /sys/kernel/debug/clk/clk_summary clock enable_cnt prepare_cnt rate --------------------------------------------------------------------- osc32k 0 0 32768 osc24M_fixed 0 0 24000000 osc24M 0 0 24000000 apb1_mux 0 0 24000000 apb1 0 0 24000000 pll1 0 0 60000000 cpu 0 0 60000000 axi 0 0 60000000 ahb 0 0 60000000 apb0 0 0 30000000 dummy 0 0 0 After "yes >/dev/null &": / # cat /sys/kernel/debug/clk/clk_summary clock enable_cnt prepare_cnt rate --------------------------------------------------------------------- osc32k 0 0 32768 osc24M_fixed 0 0 24000000 osc24M 0 0 24000000 apb1_mux 0 0 24000000 apb1 0 0 24000000 pll1 0 0 1008000000 cpu 0 0 1008000000 axi 0 0 336000000 ahb 0 0 168000000 apb0 0 0 84000000 dummy 0 0 0 Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> 2013-02-25 11:44:26 -03:00			`#`
			`# Makefile for sunxi specific clk`
			`#`

			`obj-y += clk-sunxi.o clk-factors.o`
clk: sunxi: Move the GMAC clock to a file of its own Since we have a folder of our own, we can actually make use of it by splitting the huge clock file into several sub drivers. The gmac clock is pretty easy to deal with, since it's pretty much isolated and doesn't have any dependency on the other clocks. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Emilio López <emilio@elopez.com.ar> 2014-05-09 22:33:38 -05:00			`obj-y += clk-a10-hosc.o`
			`obj-y += clk-a20-gmac.o`
clk: sunxi: Move mod0 clock to a file of its own Since we know have the ability to declare factors clock outside of clk-sunxi, create a new mod0 driver to deal with the mod0 clocks. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com> 2014-07-10 23:55:18 +02:00			`obj-y += clk-mod0.o`
clk: sunxi: Add sun8i MBUS clock support The MBUS clock on sun8i is slightly different from the old mod0 clocks. The divider is 3 bits wider, while also needing a divider table for the higher 4 values, which all set the same divider. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> 2014-09-16 18:04:01 +08:00			`obj-y += clk-sun8i-mbus.o`
clk: sunxi: Add support for A80 basic bus clocks The A80 SoC has 12 PLL clocks, 3 AHB clocks, 2 APB clocks, and a new "GT" bus, which I assume is some kind of data bus connecting the processor cores, memory and various busses. Also there is a bus clock for a ARM CCI400 module. As far as I can tell, the GT bus and CCI400 bus clock must be protected. This patch adds driver support for peripheral related PLLs and bus clocks on the A80. The GT and CCI400 clocks are added as well as these 2 along with the PLLs they are clocked from must not be disabled. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> 2014-10-20 22:10:27 +08:00			`obj-y += clk-sun9i-core.o`
clk: sunxi: Add driver for A80 MMC config clocks/resets On the A80 SoC, the 4 mmc controllers each have a separate register controlling their register access clocks and reset controls. These registers in turn share a ahb clock gate and reset control. This patch adds a platform device driver for these controls. It requires both clocks and reset controls to be available, so using CLK_OF_DECLARE might not be the best way. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> 2015-01-20 23:46:31 +08:00			`obj-y += clk-sun9i-mmc.o`
clk: sunxi: Move USB clocks to separate file The USB clocks originally shared code with the gates clocks, but had additional reset controllers. Move these to a separate file. This will allow us to add new support for slightly different USB clocks, such as on the A80, without affecting gates clocks, and also facilitate the migration of gates clocks to a generic solution. This also cleans up the USB clocks code slightly, such as adding newlines, getting rid of the unused clkdev call, using a simple u32 instead of BITMAP for the clock masks, using BIT() macro to declare the clock bitmasks, and using of_io_request_and_map() to get the I/O address. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> 2015-01-28 03:54:06 +08:00			`obj-y += clk-usb.o`
clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support The PRCM (Power/Reset/Clock Management) unit provides several clock devices: - AR100 clk: used to clock the Power Management co-processor - AHB0 clk: used to clock the AHB0 bus - APB0 clk and gates: used to clk peripherals connected to the APB0 bus Add support for these clks in a separate driver so that they can be probed as platform devices instead of registered during early init. This is needed to be able to probe PRCM MFD subdevices. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Emilio López <emilio@elopez.com.ar> 2014-05-15 10:55:11 +02:00
clk: sunxi: Add A23 APB0 divider clock support The A23 has an almost identical PRCM clock tree. The difference in the APB0 clock is the smallest divisor is 1, instead of 2. This patch adds a separate sun8i-a23-apb0-clk driver to support it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> 2014-07-03 22:55:41 +08:00			`obj-$(CONFIG_MFD_SUN6I_PRCM) += \`
			`clk-sun6i-ar100.o clk-sun6i-apb0.o clk-sun6i-apb0-gates.o \`
			`clk-sun8i-apb0.o`