forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
linux-pinenote/drivers/pwm/Kconfig

313 lines
8.4 KiB
Text
Raw Normal View History

pwm: Add PWM framework support This patch adds framework support for PWM (pulse width modulation) devices. The is a barebone PWM API already in the kernel under include/linux/pwm.h, but it does not allow for multiple drivers as each of them implements the pwm_*() functions. There are other PWM framework patches around from Bill Gatliff. Unlike his framework this one does not change the existing API for PWMs so that this framework can act as a drop in replacement for the existing API. Why another framework? Several people argue that there should not be another framework for PWMs but they should be integrated into one of the existing frameworks like led or hwmon. Unlike these frameworks the PWM framework is agnostic to the purpose of the PWM. In fact, a PWM can drive a LED, but this makes the LED framework a user of a PWM, like already done in leds-pwm.c. The gpio framework also is not suitable for PWMs. Every gpio could be turned into a PWM using timer based toggling, but on the other hand not every PWM hardware device can be turned into a gpio due to the lack of hardware capabilities. This patch does not try to improve the PWM API yet, this could be done in subsequent patches. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Matthias Kaehlcke <matthias@kaehlcke.net> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> [thierry.reding@avionic-design.de: fixup typos, kerneldoc comments] Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2011-01-28 09:40:40 +01:00
menuconfig PWM
pwm: Improve Kconfig help text The Kconfig help text should help the user understand what functionality is provided by an option. This is especially true for new subsystems. An improved help text is provided by this commit in the hopes of clarifying the usefulness of the PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Borislav Petkov <bp@alien8.de>
2012-08-16 08:01:21 +02:00
bool "Pulse-Width Modulation (PWM) Support"
pwm: Add PWM framework support This patch adds framework support for PWM (pulse width modulation) devices. The is a barebone PWM API already in the kernel under include/linux/pwm.h, but it does not allow for multiple drivers as each of them implements the pwm_*() functions. There are other PWM framework patches around from Bill Gatliff. Unlike his framework this one does not change the existing API for PWMs so that this framework can act as a drop in replacement for the existing API. Why another framework? Several people argue that there should not be another framework for PWMs but they should be integrated into one of the existing frameworks like led or hwmon. Unlike these frameworks the PWM framework is agnostic to the purpose of the PWM. In fact, a PWM can drive a LED, but this makes the LED framework a user of a PWM, like already done in leds-pwm.c. The gpio framework also is not suitable for PWMs. Every gpio could be turned into a PWM using timer based toggling, but on the other hand not every PWM hardware device can be turned into a gpio due to the lack of hardware capabilities. This patch does not try to improve the PWM API yet, this could be done in subsequent patches. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Matthias Kaehlcke <matthias@kaehlcke.net> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> [thierry.reding@avionic-design.de: fixup typos, kerneldoc comments] Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2011-01-28 09:40:40 +01:00
help
pwm: Improve Kconfig help text The Kconfig help text should help the user understand what functionality is provided by an option. This is especially true for new subsystems. An improved help text is provided by this commit in the hopes of clarifying the usefulness of the PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Borislav Petkov <bp@alien8.de>
2012-08-16 08:01:21 +02:00
Generic Pulse-Width Modulation (PWM) support.
pwm: Add PWM framework support This patch adds framework support for PWM (pulse width modulation) devices. The is a barebone PWM API already in the kernel under include/linux/pwm.h, but it does not allow for multiple drivers as each of them implements the pwm_*() functions. There are other PWM framework patches around from Bill Gatliff. Unlike his framework this one does not change the existing API for PWMs so that this framework can act as a drop in replacement for the existing API. Why another framework? Several people argue that there should not be another framework for PWMs but they should be integrated into one of the existing frameworks like led or hwmon. Unlike these frameworks the PWM framework is agnostic to the purpose of the PWM. In fact, a PWM can drive a LED, but this makes the LED framework a user of a PWM, like already done in leds-pwm.c. The gpio framework also is not suitable for PWMs. Every gpio could be turned into a PWM using timer based toggling, but on the other hand not every PWM hardware device can be turned into a gpio due to the lack of hardware capabilities. This patch does not try to improve the PWM API yet, this could be done in subsequent patches. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Matthias Kaehlcke <matthias@kaehlcke.net> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> [thierry.reding@avionic-design.de: fixup typos, kerneldoc comments] Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2011-01-28 09:40:40 +01:00
pwm: Improve Kconfig help text The Kconfig help text should help the user understand what functionality is provided by an option. This is especially true for new subsystems. An improved help text is provided by this commit in the hopes of clarifying the usefulness of the PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Borislav Petkov <bp@alien8.de>
2012-08-16 08:01:21 +02:00
In Pulse-Width Modulation, a variation of the width of pulses
in a rectangular pulse signal is used as a means to alter the
average power of the signal. Applications include efficient
power delivery and voltage regulation. In computer systems,
PWMs are commonly used to control fans or the brightness of
display backlights.
This framework provides a generic interface to PWM devices
within the Linux kernel. On the driver side it provides an API
to register and unregister a PWM chip, an abstraction of a PWM
controller, that supports one or more PWM devices. Client
drivers can request PWM devices and use the generic framework
to configure as well as enable and disable them.
This generic framework replaces the legacy PWM framework which
allows only a single driver implementing the required API. Not
all legacy implementations have been ported to the framework
yet. The framework provides an API that is backward compatible
with the legacy framework so that existing client drivers
continue to work as expected.
If unsure, say no.
pwm: Add PWM framework support This patch adds framework support for PWM (pulse width modulation) devices. The is a barebone PWM API already in the kernel under include/linux/pwm.h, but it does not allow for multiple drivers as each of them implements the pwm_*() functions. There are other PWM framework patches around from Bill Gatliff. Unlike his framework this one does not change the existing API for PWMs so that this framework can act as a drop in replacement for the existing API. Why another framework? Several people argue that there should not be another framework for PWMs but they should be integrated into one of the existing frameworks like led or hwmon. Unlike these frameworks the PWM framework is agnostic to the purpose of the PWM. In fact, a PWM can drive a LED, but this makes the LED framework a user of a PWM, like already done in leds-pwm.c. The gpio framework also is not suitable for PWMs. Every gpio could be turned into a PWM using timer based toggling, but on the other hand not every PWM hardware device can be turned into a gpio due to the lack of hardware capabilities. This patch does not try to improve the PWM API yet, this could be done in subsequent patches. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Matthias Kaehlcke <matthias@kaehlcke.net> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> [thierry.reding@avionic-design.de: fixup typos, kerneldoc comments] Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2011-01-28 09:40:40 +01:00
if PWM
pwm: Add sysfs interface Add a simple sysfs interface to the generic PWM framework. /sys/class/pwm/ `-- pwmchipN/ for each PWM chip |-- export (w/o) ask the kernel to export a PWM channel |-- npwm (r/o) number of PWM channels in this PWM chip |-- pwmX/ for each exported PWM channel | |-- duty_cycle (r/w) duty cycle (in nanoseconds) | |-- enable (r/w) enable/disable PWM | |-- period (r/w) period (in nanoseconds) | `-- polarity (r/w) polarity of PWM (normal/inversed) `-- unexport (w/o) return a PWM channel to the kernel Based on work by Lars Poeschel. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Rob Landley <rob@landley.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-11 10:38:59 -07:00
config PWM_SYSFS
bool
default y if SYSFS
pwm: Move AB8500 PWM driver to PWM framework This commit moves the driver to drivers/pwm and converts it to the new PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arun Murthy <arun.murthy@stericsson.com>
2012-08-31 11:46:24 +02:00
config PWM_AB8500
tristate "AB8500 PWM support"
depends on AB8500_CORE && ARCH_U8500
help
Generic PWM framework driver for Analog Baseband AB8500.
To compile this driver as a module, choose M here: the module
will be called pwm-ab8500.
pwm: atmel-pwm: Add Atmel PWM controller driver Add a PWM framework driver for the PWM controller found on Atmel SoCs. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [thierry.reding: coding style and other minor cleanups] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-12-13 14:41:49 +08:00
config PWM_ATMEL
tristate "Atmel PWM support"
PWM: atmel: allow building for AVR32 The Atmel PWM IP can be found on avr32 chips. This allows selecting and building the driver on avr32. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-29 01:20:10 +02:00
depends on ARCH_AT91 || AVR32
pwm: atmel-pwm: Add Atmel PWM controller driver Add a PWM framework driver for the PWM controller found on Atmel SoCs. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [thierry.reding: coding style and other minor cleanups] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-12-13 14:41:49 +08:00
help
Generic PWM framework driver for Atmel SoC.
To compile this driver as a module, choose M here: the module
will be called pwm-atmel.
pwm: atmel: add Timer Counter Block PWM driver This patch adds a PWM driver based on Atmel Timer Counter Block. The Timer Counter Block is used in Waveform generator mode. A Timer Counter Block provides up to 6 PWM devices grouped by 2: * group 0 = PWM 0 and 1 * group 1 = PWM 2 and 3 * group 2 = PMW 4 and 5 PWM devices in a given group must be configured with the same period value. If a PWM device in a group tries to change the period value and the other device is already configured with a different value an error will be returned. This driver requires device tree support. The Timer Counter Block number used to create a PWM chip is given by the tc-block field in an "atmel,tcb-pwm" compatible node. This patch was tested on kizbox board (at91sam9g20 SoC) with pwm-leds. Signed-off-by: Boris BREZILLON <linux-arm@overkiz.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-01-08 16:36:42 +01:00
config PWM_ATMEL_TCB
pwm: Make Kconfig entries more consistent PWM is now consistently spelled in all uppercase letters. For the Atmel driver the entry now also mentions Atmel to make it easier to find. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-01-30 09:19:55 +01:00
tristate "Atmel TC Block PWM support"
pwm: atmel: add Timer Counter Block PWM driver This patch adds a PWM driver based on Atmel Timer Counter Block. The Timer Counter Block is used in Waveform generator mode. A Timer Counter Block provides up to 6 PWM devices grouped by 2: * group 0 = PWM 0 and 1 * group 1 = PWM 2 and 3 * group 2 = PMW 4 and 5 PWM devices in a given group must be configured with the same period value. If a PWM device in a group tries to change the period value and the other device is already configured with a different value an error will be returned. This driver requires device tree support. The Timer Counter Block number used to create a PWM chip is given by the tc-block field in an "atmel,tcb-pwm" compatible node. This patch was tested on kizbox board (at91sam9g20 SoC) with pwm-leds. Signed-off-by: Boris BREZILLON <linux-arm@overkiz.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-01-08 16:36:42 +01:00
depends on ATMEL_TCLIB && OF
help
Generic PWM framework driver for Atmel Timer Counter Block.
A Timer Counter Block provides 6 PWM devices grouped by 2.
Devices in a given group must have the same period.
To compile this driver as a module, choose M here: the module
will be called pwm-atmel-tcb.
pwm: kona: Introduce Kona PWM controller support Add support for the six-channel Kona PWM controller found on Broadcom mobile SoCs like bcm281xx. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-04-25 11:31:12 -07:00
config PWM_BCM_KONA
tristate "Kona PWM support"
depends on ARCH_BCM_MOBILE
help
Generic PWM framework driver for Broadcom Kona PWM block.
To compile this driver as a module, choose M here: the module
will be called pwm-bcm-kona.
pwm: Move Blackfin PWM driver to PWM framework This commit moves the Blackfin PWM driver to the drivers/pwm sub- directory and converts it to register with the new PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-01-02 20:53:50 +01:00
config PWM_BFIN
tristate "Blackfin PWM support"
depends on BFIN_GPTIMERS
help
Generic PWM framework driver for Blackfin.
To compile this driver as a module, choose M here: the module
will be called pwm-bfin.
pwm: Add CLPS711X PWM support Add a new driver for the ARM CLPS711X Pulse Width Modulator (PWM) interface. This CPU contain two 4-bit PWM outputs with constant period, based on CPU PLL frequency. PWM polarity is determined by hardware by power on reset. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-03-12 19:53:05 +04:00
config PWM_CLPS711X
tristate "CLPS711X PWM support"
depends on ARCH_CLPS711X || COMPILE_TEST
help
Generic PWM framework driver for Cirrus Logic CLPS711X.
To compile this driver as a module, choose M here: the module
will be called pwm-clps711x.
pwm: add ep93xx PWM support Remove the non-standard EP93xx PWM driver in drivers/misc and add a new driver for the PWM controllers on the EP93xx platform based on the PWM framework. These PWM controllers each support 1 PWM channel with programmable duty cycle, frequency, and polarity inversion. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-15 18:40:03 -07:00
config PWM_EP93XX
tristate "Cirrus Logic EP93xx PWM support"
depends on ARCH_EP93XX
help
Generic PWM framework driver for Cirrus Logic EP93xx.
To compile this driver as a module, choose M here: the module
will be called pwm-ep93xx.
pwm: Add Freescale FTM PWM driver support The FTM PWM device can be found on Vybrid VF610 Tower and Layerscape LS-1 SoCs. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Jingchang Lu <b35083@freescale.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Yuan Yao <yao.yuan@freescale.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-02-27 17:39:49 +08:00
config PWM_FSL_FTM
tristate "Freescale FlexTimer Module (FTM) PWM support"
depends on OF
help
Generic FTM PWM framework driver for Freescale VF610 and
Layerscape LS-1 SoCs.
To compile this driver as a module, choose M here: the module
will be called pwm-fsl-ftm.
ARM i.MX: Move i.MX pwm driver to pwm framework Move the driver to drivers/pwm/ and convert it to use the framework. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> [eric@eukrea.com: set chip.dev to prevent probe failure] [eric@eukrea.com: fix pwmchip_add return code test] Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-03-15 10:04:35 +01:00
config PWM_IMX
pwm: Make Kconfig entries more consistent PWM is now consistently spelled in all uppercase letters. For the Atmel driver the entry now also mentions Atmel to make it easier to find. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-01-30 09:19:55 +01:00
tristate "i.MX PWM support"
ARM i.MX: Move i.MX pwm driver to pwm framework Move the driver to drivers/pwm/ and convert it to use the framework. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> [eric@eukrea.com: set chip.dev to prevent probe failure] [eric@eukrea.com: fix pwmchip_add return code test] Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-03-15 10:04:35 +01:00
depends on ARCH_MXC
help
Generic PWM framework driver for i.MX.
To compile this driver as a module, choose M here: the module
will be called pwm-imx.
pwm: Add Ingenic JZ4740 support This commit moves the driver to drivers/pwm and converts it to the new PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Ralf Baechle <ralf@linux-mips.org>
2012-08-22 10:01:24 +02:00
config PWM_JZ4740
tristate "Ingenic JZ4740 PWM support"
depends on MACH_JZ4740
help
Generic PWM framework driver for Ingenic JZ4740 based
machines.
To compile this driver as a module, choose M here: the module
will be called pwm-jz4740.
pwm: Add LP3943 PWM driver This is the other of the LP3943 MFD driver. LP3943 can be used as a PWM generator, up to 2 channels. * Two PWM generators supported * Supported PWM operations request, free, config, enable and disable * Pin assignment A driver data, 'pin_used' is checked when a PWM is requested. If the output pin is already assigned, then returns as failure. If the pin is available, 'pin_used' is set. When the PWM is not used anymore, then it is cleared. It is defined as unsigned long type for atomic bit operation APIs, but only LSB 16bits are used because LP3943 has 16 outputs. Signed-off-by: Milo Kim <milo.kim@ti.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-12-06 11:18:43 +09:00
config PWM_LP3943
tristate "TI/National Semiconductor LP3943 PWM support"
depends on MFD_LP3943
help
Generic PWM framework driver for LP3943 which supports two PWM
channels.
To compile this driver as a module, choose M here: the module
will be called pwm-lp3943.
pwm: add lpc32xx PWM support Add lpc32xx SOC PWM driver. Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-10 11:38:10 -03:00
config PWM_LPC32XX
tristate "LPC32XX PWM support"
depends on ARCH_LPC32XX
help
Generic PWM framework driver for LPC32XX. The LPC32XX SOC has two
PWM controllers.
To compile this driver as a module, choose M here: the module
will be called pwm-lpc32xx.
pwm: add support for Intel Low Power Subsystem PWM Add support for Intel Low Power I/O subsystem PWM controllers found on Intel BayTrail SoC. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Chew, Kean Ho <kean.ho.chew@intel.com> Signed-off-by: Chang, Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com> Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-03-20 22:04:23 +08:00
config PWM_LPSS
tristate "Intel LPSS PWM support"
depends on ACPI
help
Generic PWM framework driver for Intel Low Power Subsystem PWM
controller.
To compile this driver as a module, choose M here: the module
will be called pwm-lpss.
pwm: add pwm-mxs support Add generic PWM framework driver (DT only) for Freescale MXS. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-04-04 10:50:52 +08:00
config PWM_MXS
tristate "Freescale MXS PWM support"
depends on ARCH_MXS && OF
pwm: pwm-mxs: use global reset function stmp_reset_block Use global reset function stmp_reset_block instead of mxs_reset_block to remove <mach/common.h> inclusion. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-06-26 16:58:09 +08:00
select STMP_DEVICE
pwm: add pwm-mxs support Add generic PWM framework driver (DT only) for Freescale MXS. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-04-04 10:50:52 +08:00
help
Generic PWM framework driver for Freescale MXS.
To compile this driver as a module, choose M here: the module
will be called pwm-mxs.
pwm: add pca9685 driver Add pwm driver for the NXP pca9685 16 channel pwm-led controller. The driver is really barebones at this stage. E.g. the OE' pin and therefore the corresponding registers are not supported. The driver was tested on a HW where this pin is tied to GND. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> [thierry.reding@gmail.com: style and whitespace cleanups] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-05-30 09:50:12 +02:00
config PWM_PCA9685
tristate "NXP PCA9685 PWM driver"
pwm: pca9685: depends on I2C rather than REGMAP_I2C REGMAP_I2C is not a visible config option. Thus make PWM_PCA9685 depend on I2c and then select REGMAP_I2C. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-12-17 11:51:29 +08:00
depends on OF && I2C
select REGMAP_I2C
pwm: add pca9685 driver Add pwm driver for the NXP pca9685 16 channel pwm-led controller. The driver is really barebones at this stage. E.g. the OE' pin and therefore the corresponding registers are not supported. The driver was tested on a HW where this pin is tied to GND. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> [thierry.reding@gmail.com: style and whitespace cleanups] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-05-30 09:50:12 +02:00
help
Generic PWM framework driver for NXP PCA9685 LED controller.
To compile this driver as a module, choose M here: the module
will be called pwm-pca9685.
pwm: Move PUV3 PWM driver to PWM framework This commit moves the driver to drivers/pwm and converts it to the new PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Qin Rui <qinrui@mprc.pku.edu.cn> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2012-08-31 08:29:24 +02:00
config PWM_PUV3
tristate "PKUnity NetBook-0916 PWM support"
depends on ARCH_PUV3
help
Generic PWM framework driver for PKUnity NetBook-0916.
To compile this driver as a module, choose M here: the module
will be called pwm-puv3.
pwm: Move PXA PWM driver to PWM framework This commit moves the PXA PWM driver to the drivers/pwm subdirectory and converts it to use the new PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-01-02 21:22:38 +01:00
config PWM_PXA
tristate "PXA PWM support"
depends on ARCH_PXA
help
Generic PWM framework driver for PXA.
To compile this driver as a module, choose M here: the module
will be called pwm-pxa.
pwm: Add Renesas TPU PWM driver The Timer Pulse Unit (TPU) is a 4-channels 16-bit timer used to generate waveforms. This driver exposes PWM functions through the PWM API for other drivers to use. The code is loosely based on the leds-renesas-tpu driver by Magnus Damm and the TPU PWM driver shipped in the Armadillo EVA 800 kernel sources. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Simon Horman <horms@verge.net.au> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-13 18:54:44 +02:00
config PWM_RENESAS_TPU
tristate "Renesas TPU PWM support"
pwm: renesas-tpu: Enable driver compilation with COMPILE_TEST This helps increasing build testing coverage. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-pwm@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-11-27 02:18:33 +01:00
depends on ARCH_SHMOBILE || COMPILE_TEST
pwm: renesas-tpu: Add dependency on HAS_IOMEM On archs like S390 or um this driver cannot build nor work. Make it depend on HAS_IOMEM to bypass build failures. drivers/built-in.o: In function `tpu_probe': drivers/pwm/pwm-renesas-tpu.c:421: undefined reference to `devm_ioremap_resource' Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-01-31 13:45:18 +01:00
depends on HAS_IOMEM
pwm: Add Renesas TPU PWM driver The Timer Pulse Unit (TPU) is a 4-channels 16-bit timer used to generate waveforms. This driver exposes PWM functions through the PWM API for other drivers to use. The code is loosely based on the leds-renesas-tpu driver by Magnus Damm and the TPU PWM driver shipped in the Armadillo EVA 800 kernel sources. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Simon Horman <horms@verge.net.au> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-13 18:54:44 +02:00
help
This driver exposes the Timer Pulse Unit (TPU) PWM controller found
in Renesas chips through the PWM API.
To compile this driver as a module, choose M here: the module
will be called pwm-renesas-tpu.
pwm: add Rockchip SoC PWM support This commit adds a driver for the PWM controller found on Rockchip RK29, RK30 and RK31 SoCs. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-06-21 16:22:06 +02:00
config PWM_ROCKCHIP
tristate "Rockchip PWM support"
depends on ARCH_ROCKCHIP
help
Generic PWM framework driver for the PWM controller found on
Rockchip SoCs.
ARM Samsung: Move s3c pwm driver to pwm framework Move the driver to drivers/pwm/ and convert it to use the framework. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> [eric@eukrea.com: fix pwmchip_add return code test] Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-03-15 10:04:36 +01:00
config PWM_SAMSUNG
pwm: Make Kconfig entries more consistent PWM is now consistently spelled in all uppercase letters. For the Atmel driver the entry now also mentions Atmel to make it easier to find. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-01-30 09:19:55 +01:00
tristate "Samsung PWM support"
ARM Samsung: Move s3c pwm driver to pwm framework Move the driver to drivers/pwm/ and convert it to use the framework. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> [eric@eukrea.com: fix pwmchip_add return code test] Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-03-15 10:04:36 +01:00
depends on PLAT_SAMSUNG
help
Generic PWM framework driver for Samsung.
To compile this driver as a module, choose M here: the module
will be called pwm-samsung.
pwm: Add SPEAr PWM chip driver support Add support for PWM chips present on SPEAr platforms. These PWM chips support 4 channel output with programmable duty cycle and frequency. More details on these PWM chips can be obtained from relevant chapter of reference manual, present at following[1] location. 1. http://www.st.com/internet/mcu/product/251211.jsp Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Vipin Kumar <vipin.kumar@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-10-25 09:39:13 +05:30
config PWM_SPEAR
tristate "STMicroelectronics SPEAr PWM support"
depends on PLAT_SPEAR
depends on OF
help
Generic PWM framework driver for the PWM controller on ST
SPEAr SoCs.
To compile this driver as a module, choose M here: the module
will be called pwm-spear.
pwm: sti: Add new driver for ST's PWM IP This driver supports all current STi platforms' PWM IPs. Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> [thierry.reding: rename module to pwm-sti, fix build breakage] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-07-14 15:33:27 +01:00
config PWM_STI
tristate "STiH4xx PWM support"
depends on ARCH_STI
depends on OF
help
Generic PWM framework driver for STiH4xx SoCs.
To compile this driver as a module, choose M here: the module
will be called pwm-sti.
pwm: Add NVIDIA Tegra SoC support This commit adds a generic PWM framework driver for the PWFM controller found on NVIDIA Tegra SoCs. The driver is based on code from the Chromium kernel tree and was originally written by Gary King (NVIDIA) and later modified by Simon Que (Chromium). Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2011-12-21 07:47:07 +01:00
config PWM_TEGRA
tristate "NVIDIA Tegra PWM support"
depends on ARCH_TEGRA
help
Generic PWM framework driver for the PWFM controller found on NVIDIA
Tegra SoCs.
To compile this driver as a module, choose M here: the module
will be called pwm-tegra.
pwm: pwm-tiecap: PWM driver support for ECAP APWM ECAP hardware on AM33XX SOC supports auxiliary PWM (APWM) feature. This commit adds PWM driver support for ECAP hardware on AM33XX SOC. In the ECAP hardware, each PWM pin can also be configured to be in capture mode. Current implementation only supports PWM mode of operation. Also, hardware supports sync between multiple PWM pins but the driver supports simple independent PWM functionality. Reviewed-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-25 16:58:18 +05:30
config PWM_TIECAP
tristate "ECAP PWM support"
pwm: davinci: Add Kconfig support for ECAP & EHRPWM devices Add EHRPWM and ECAP support build support for DAVINCI_DA8XX platforms. Also, since DAVINCI platforms doesn't support TI-PWM-Subsystem module, remove the select option for CONFIG_PWM_TIPWMSS. Also, update CONFIG_PWM_TIPWMSS compiler directive appropriately in pwm-tipwmss.h to fix the below compiler error upon removal of CONFIG_PWM_TIPWMSS for DAVINCI platforms. drivers/pwm/pwm-tiecap.c: In function 'ecap_pwm_probe': drivers/pwm/pwm-tiecap.c:263:4: error: 'PWMSS_ECAPCLK_EN' undeclared (first use in this function) drivers/pwm/pwm-tiecap.c:263:4: note: each undeclared identifier is reported only once for each function it appears in drivers/pwm/pwm-tiecap.c:264:17: error: 'PWMSS_ECAPCLK_EN_ACK' undeclared (first use in this function) drivers/pwm/pwm-tiecap.c: In function 'ecap_pwm_remove': drivers/pwm/pwm-tiecap.c:291:49: error: 'PWMSS_ECAPCLK_STOP_REQ' undeclared (first use in this function) make[2]: *** [drivers/pwm/pwm-tiecap.o] Error 1 make[1]: *** [drivers/pwm] Error 2 make: *** [drivers] Error 2 Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-03-20 12:09:24 +05:30
depends on SOC_AM33XX || ARCH_DAVINCI_DA8XX
pwm: pwm-tiecap: PWM driver support for ECAP APWM ECAP hardware on AM33XX SOC supports auxiliary PWM (APWM) feature. This commit adds PWM driver support for ECAP hardware on AM33XX SOC. In the ECAP hardware, each PWM pin can also be configured to be in capture mode. Current implementation only supports PWM mode of operation. Also, hardware supports sync between multiple PWM pins but the driver supports simple independent PWM functionality. Reviewed-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-25 16:58:18 +05:30
help
PWM driver support for the ECAP APWM controller found on AM33XX
TI SOC
To compile this driver as a module, choose M here: the module
will be called pwm-tiecap.
pwm: pwm-tiehrpwm: PWM driver support for EHRPWM Enhanced high resolution PWM module (EHRPWM) hardware can be used to generate PWM output over 2 channels. This commit adds PWM driver support for EHRPWM device present on AM33XX SOC. Current implementation supports simple PWM functionality. Reviewed-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-25 16:58:19 +05:30
config PWM_TIEHRPWM
tristate "EHRPWM PWM support"
pwm: davinci: Add Kconfig support for ECAP & EHRPWM devices Add EHRPWM and ECAP support build support for DAVINCI_DA8XX platforms. Also, since DAVINCI platforms doesn't support TI-PWM-Subsystem module, remove the select option for CONFIG_PWM_TIPWMSS. Also, update CONFIG_PWM_TIPWMSS compiler directive appropriately in pwm-tipwmss.h to fix the below compiler error upon removal of CONFIG_PWM_TIPWMSS for DAVINCI platforms. drivers/pwm/pwm-tiecap.c: In function 'ecap_pwm_probe': drivers/pwm/pwm-tiecap.c:263:4: error: 'PWMSS_ECAPCLK_EN' undeclared (first use in this function) drivers/pwm/pwm-tiecap.c:263:4: note: each undeclared identifier is reported only once for each function it appears in drivers/pwm/pwm-tiecap.c:264:17: error: 'PWMSS_ECAPCLK_EN_ACK' undeclared (first use in this function) drivers/pwm/pwm-tiecap.c: In function 'ecap_pwm_remove': drivers/pwm/pwm-tiecap.c:291:49: error: 'PWMSS_ECAPCLK_STOP_REQ' undeclared (first use in this function) make[2]: *** [drivers/pwm/pwm-tiecap.o] Error 1 make[1]: *** [drivers/pwm] Error 2 make: *** [drivers] Error 2 Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-03-20 12:09:24 +05:30
depends on SOC_AM33XX || ARCH_DAVINCI_DA8XX
pwm: pwm-tiehrpwm: PWM driver support for EHRPWM Enhanced high resolution PWM module (EHRPWM) hardware can be used to generate PWM output over 2 channels. This commit adds PWM driver support for EHRPWM device present on AM33XX SOC. Current implementation supports simple PWM functionality. Reviewed-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-25 16:58:19 +05:30
help
PWM driver support for the EHRPWM controller found on AM33XX
TI SOC
To compile this driver as a module, choose M here: the module
will be called pwm-tiehrpwm.
pwm: Add TI PWM subsystem driver In some platforms (like am33xx), PWM sub modules (ECAP, EHRPWM, EQEP) are integrated to PWM subsystem. These PWM submodules has resources shared and only one register bit-field is provided to control module/clock enable/disable, makes it difficult to handle common resources from independent PWMSS submodule drivers. So the solution here implemented in this patch is, to create driver for PWMSS and take the role of parent driver for PWM submodules. PWMSS parent driver enumerates all the child nodes under PWMSS module. Also symbol "pwmss_submodule_state_change" exported to enable clock gating for individual PWMSS submodules, and submodule drivers has to enable clock gating from their drivers. As this is only supported during DT boot, the parent/child relationship is created and populated in DT execution flow. The only required change is inside DTS file, making EHRPWM & ECAP as a child to PWMSS node. Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-11-27 14:18:06 +05:30
config PWM_TIPWMSS
bool
pwm: davinci: Add Kconfig support for ECAP & EHRPWM devices Add EHRPWM and ECAP support build support for DAVINCI_DA8XX platforms. Also, since DAVINCI platforms doesn't support TI-PWM-Subsystem module, remove the select option for CONFIG_PWM_TIPWMSS. Also, update CONFIG_PWM_TIPWMSS compiler directive appropriately in pwm-tipwmss.h to fix the below compiler error upon removal of CONFIG_PWM_TIPWMSS for DAVINCI platforms. drivers/pwm/pwm-tiecap.c: In function 'ecap_pwm_probe': drivers/pwm/pwm-tiecap.c:263:4: error: 'PWMSS_ECAPCLK_EN' undeclared (first use in this function) drivers/pwm/pwm-tiecap.c:263:4: note: each undeclared identifier is reported only once for each function it appears in drivers/pwm/pwm-tiecap.c:264:17: error: 'PWMSS_ECAPCLK_EN_ACK' undeclared (first use in this function) drivers/pwm/pwm-tiecap.c: In function 'ecap_pwm_remove': drivers/pwm/pwm-tiecap.c:291:49: error: 'PWMSS_ECAPCLK_STOP_REQ' undeclared (first use in this function) make[2]: *** [drivers/pwm/pwm-tiecap.o] Error 1 make[1]: *** [drivers/pwm] Error 2 make: *** [drivers] Error 2 Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-03-20 12:09:24 +05:30
default y if SOC_AM33XX && (PWM_TIECAP || PWM_TIEHRPWM)
pwm: Add TI PWM subsystem driver In some platforms (like am33xx), PWM sub modules (ECAP, EHRPWM, EQEP) are integrated to PWM subsystem. These PWM submodules has resources shared and only one register bit-field is provided to control module/clock enable/disable, makes it difficult to handle common resources from independent PWMSS submodule drivers. So the solution here implemented in this patch is, to create driver for PWMSS and take the role of parent driver for PWM submodules. PWMSS parent driver enumerates all the child nodes under PWMSS module. Also symbol "pwmss_submodule_state_change" exported to enable clock gating for individual PWMSS submodules, and submodule drivers has to enable clock gating from their drivers. As this is only supported during DT boot, the parent/child relationship is created and populated in DT execution flow. The only required change is inside DTS file, making EHRPWM & ECAP as a child to PWMSS node. Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-11-27 14:18:06 +05:30
help
PWM Subsystem driver support for AM33xx SOC.
PWM submodules require PWM config space access from submodule
drivers and require common parent driver support.
pwm: New driver to support PWMs on TWL4030/6030 series of PMICs The driver supports the following PWM outputs: TWL4030 PWM0 and PWM1 TWL6030 PWM1 and PWM2 On TWL4030 the PWM signals are muxed. Upon requesting the PWM the driver will select the correct mux so the PWM can be used. When the PWM has been freed the original configuration is going to be restored. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-11-27 11:09:57 +01:00
config PWM_TWL
tristate "TWL4030/6030 PWM support"
depends on TWL4030_CORE
help
Generic PWM framework driver for TWL4030/6030.
To compile this driver as a module, choose M here: the module
will be called pwm-twl.
pwm: New driver to support PWM driven LEDs on TWL4030/6030 series of PMICs The driver supports the following LED outputs as generic PWM driver: TWL4030 LEDA and LEDB (PWMA and PWMB) TWL6030 Charging indicator LED (PWM LED) On TWL6030 when the PWM requested LED is configured to be controlled by SW. In this case the user can enable/disable and set the duty period freely. When the PWM has been freed, the LED driver is put back to HW control. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-11-27 11:09:58 +01:00
config PWM_TWL_LED
tristate "TWL4030/6030 PWM support for LED drivers"
depends on TWL4030_CORE
help
Generic PWM framework driver for TWL4030/6030 LED terminals.
To compile this driver as a module, choose M here: the module
will be called pwm-twl-led.
ARM vt8500: Move vt8500 pwm driver to pwm framework Move the driver to drivers/pwm/ and convert it to use the framework. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Alexey Charkov <alchark@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-03-15 10:04:37 +01:00
config PWM_VT8500
pwm: Make Kconfig entries more consistent PWM is now consistently spelled in all uppercase letters. For the Atmel driver the entry now also mentions Atmel to make it easier to find. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-01-30 09:19:55 +01:00
tristate "vt8500 PWM support"
ARM vt8500: Move vt8500 pwm driver to pwm framework Move the driver to drivers/pwm/ and convert it to use the framework. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Alexey Charkov <alchark@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-03-15 10:04:37 +01:00
depends on ARCH_VT8500
help
Generic PWM framework driver for vt8500.
To compile this driver as a module, choose M here: the module
will be called pwm-vt8500.
pwm: Add PWM framework support This patch adds framework support for PWM (pulse width modulation) devices. The is a barebone PWM API already in the kernel under include/linux/pwm.h, but it does not allow for multiple drivers as each of them implements the pwm_*() functions. There are other PWM framework patches around from Bill Gatliff. Unlike his framework this one does not change the existing API for PWMs so that this framework can act as a drop in replacement for the existing API. Why another framework? Several people argue that there should not be another framework for PWMs but they should be integrated into one of the existing frameworks like led or hwmon. Unlike these frameworks the PWM framework is agnostic to the purpose of the PWM. In fact, a PWM can drive a LED, but this makes the LED framework a user of a PWM, like already done in leds-pwm.c. The gpio framework also is not suitable for PWMs. Every gpio could be turned into a PWM using timer based toggling, but on the other hand not every PWM hardware device can be turned into a gpio due to the lack of hardware capabilities. This patch does not try to improve the PWM API yet, this could be done in subsequent patches. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Matthias Kaehlcke <matthias@kaehlcke.net> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> [thierry.reding@avionic-design.de: fixup typos, kerneldoc comments] Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2011-01-28 09:40:40 +01:00
endif
Reference in a new issue Copy permalink