| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | /*
 | 
					
						
							|  |  |  |  * Copyright (C) 2004-2006 Atmel Corporation | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * This program is free software; you can redistribute it and/or modify | 
					
						
							|  |  |  |  * it under the terms of the GNU General Public License version 2 as | 
					
						
							|  |  |  |  * published by the Free Software Foundation. | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | #ifndef __ASM_AVR32_UACCESS_H
 | 
					
						
							|  |  |  | #define __ASM_AVR32_UACCESS_H
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #include <linux/errno.h>
 | 
					
						
							|  |  |  | #include <linux/sched.h>
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define VERIFY_READ	0
 | 
					
						
							|  |  |  | #define VERIFY_WRITE	1
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | typedef struct { | 
					
						
							|  |  |  | 	unsigned int is_user_space; | 
					
						
							|  |  |  | } mm_segment_t; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /*
 | 
					
						
							|  |  |  |  * The fs value determines whether argument validity checking should be | 
					
						
							|  |  |  |  * performed or not.  If get_fs() == USER_DS, checking is performed, with | 
					
						
							|  |  |  |  * get_fs() == KERNEL_DS, checking is bypassed. | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * For historical reasons (Data Segment Register?), these macros are misnamed. | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | #define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
 | 
					
						
							|  |  |  | #define segment_eq(a,b)	((a).is_user_space == (b).is_user_space)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define USER_ADDR_LIMIT 0x80000000
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define KERNEL_DS	MAKE_MM_SEG(0)
 | 
					
						
							|  |  |  | #define USER_DS		MAKE_MM_SEG(1)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define get_ds()	(KERNEL_DS)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static inline mm_segment_t get_fs(void) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	return MAKE_MM_SEG(test_thread_flag(TIF_USERSPACE)); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static inline void set_fs(mm_segment_t s) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	if (s.is_user_space) | 
					
						
							|  |  |  | 		set_thread_flag(TIF_USERSPACE); | 
					
						
							|  |  |  | 	else | 
					
						
							|  |  |  | 		clear_thread_flag(TIF_USERSPACE); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /*
 | 
					
						
							|  |  |  |  * Test whether a block of memory is a valid user space address. | 
					
						
							|  |  |  |  * Returns 0 if the range is valid, nonzero otherwise. | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * We do the following checks: | 
					
						
							|  |  |  |  *   1. Is the access from kernel space? | 
					
						
							|  |  |  |  *   2. Does (addr + size) set the carry bit? | 
					
						
							|  |  |  |  *   3. Is (addr + size) a negative number (i.e. >= 0x80000000)? | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * If yes on the first check, access is granted. | 
					
						
							|  |  |  |  * If no on any of the others, access is denied. | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | #define __range_ok(addr, size)						\
 | 
					
						
							|  |  |  | 	(test_thread_flag(TIF_USERSPACE)				\ | 
					
						
							|  |  |  | 	 && (((unsigned long)(addr) >= 0x80000000)			\ | 
					
						
							|  |  |  | 	     || ((unsigned long)(size) > 0x80000000)			\ | 
					
						
							|  |  |  | 	     || (((unsigned long)(addr) + (unsigned long)(size)) > 0x80000000))) | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define access_ok(type, addr, size) (likely(__range_ok(addr, size) == 0))
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* Generic arbitrary sized copy. Return the number of bytes NOT copied */ | 
					
						
							|  |  |  | extern __kernel_size_t __copy_user(void *to, const void *from, | 
					
						
							|  |  |  | 				   __kernel_size_t n); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | extern __kernel_size_t copy_to_user(void __user *to, const void *from, | 
					
						
							|  |  |  | 				    __kernel_size_t n); | 
					
						
							|  |  |  | extern __kernel_size_t copy_from_user(void *to, const void __user *from, | 
					
						
							|  |  |  | 				      __kernel_size_t n); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static inline __kernel_size_t __copy_to_user(void __user *to, const void *from, | 
					
						
							|  |  |  | 					     __kernel_size_t n) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	return __copy_user((void __force *)to, from, n); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | static inline __kernel_size_t __copy_from_user(void *to, | 
					
						
							|  |  |  | 					       const void __user *from, | 
					
						
							|  |  |  | 					       __kernel_size_t n) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	return __copy_user(to, (const void __force *)from, n); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define __copy_to_user_inatomic __copy_to_user
 | 
					
						
							|  |  |  | #define __copy_from_user_inatomic __copy_from_user
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /*
 | 
					
						
							|  |  |  |  * put_user: - Write a simple value into user space. | 
					
						
							|  |  |  |  * @x:   Value to copy to user space. | 
					
						
							|  |  |  |  * @ptr: Destination address, in user space. | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * Context: User context only.  This function may sleep. | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * This macro copies a single simple value from kernel space to user | 
					
						
							|  |  |  |  * space.  It supports simple types like char and int, but not larger | 
					
						
							|  |  |  |  * data types like structures or arrays. | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * @ptr must have pointer-to-simple-variable type, and @x must be assignable | 
					
						
							|  |  |  |  * to the result of dereferencing @ptr. | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * Returns zero on success, or -EFAULT on error. | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | #define put_user(x,ptr)	\
 | 
					
						
							|  |  |  | 	__put_user_check((x),(ptr),sizeof(*(ptr))) | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /*
 | 
					
						
							|  |  |  |  * get_user: - Get a simple variable from user space. | 
					
						
							|  |  |  |  * @x:   Variable to store result. | 
					
						
							|  |  |  |  * @ptr: Source address, in user space. | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * Context: User context only.  This function may sleep. | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * This macro copies a single simple variable from user space to kernel | 
					
						
							|  |  |  |  * space.  It supports simple types like char and int, but not larger | 
					
						
							|  |  |  |  * data types like structures or arrays. | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * @ptr must have pointer-to-simple-variable type, and the result of | 
					
						
							|  |  |  |  * dereferencing @ptr must be assignable to @x without a cast. | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * Returns zero on success, or -EFAULT on error. | 
					
						
							|  |  |  |  * On error, the variable @x is set to zero. | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | #define get_user(x,ptr) \
 | 
					
						
							|  |  |  | 	__get_user_check((x),(ptr),sizeof(*(ptr))) | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /*
 | 
					
						
							|  |  |  |  * __put_user: - Write a simple value into user space, with less checking. | 
					
						
							|  |  |  |  * @x:   Value to copy to user space. | 
					
						
							|  |  |  |  * @ptr: Destination address, in user space. | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * Context: User context only.  This function may sleep. | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * This macro copies a single simple value from kernel space to user | 
					
						
							|  |  |  |  * space.  It supports simple types like char and int, but not larger | 
					
						
							|  |  |  |  * data types like structures or arrays. | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * @ptr must have pointer-to-simple-variable type, and @x must be assignable | 
					
						
							|  |  |  |  * to the result of dereferencing @ptr. | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * Caller must check the pointer with access_ok() before calling this | 
					
						
							|  |  |  |  * function. | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * Returns zero on success, or -EFAULT on error. | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | #define __put_user(x,ptr) \
 | 
					
						
							|  |  |  | 	__put_user_nocheck((x),(ptr),sizeof(*(ptr))) | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /*
 | 
					
						
							|  |  |  |  * __get_user: - Get a simple variable from user space, with less checking. | 
					
						
							|  |  |  |  * @x:   Variable to store result. | 
					
						
							|  |  |  |  * @ptr: Source address, in user space. | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * Context: User context only.  This function may sleep. | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * This macro copies a single simple variable from user space to kernel | 
					
						
							|  |  |  |  * space.  It supports simple types like char and int, but not larger | 
					
						
							|  |  |  |  * data types like structures or arrays. | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * @ptr must have pointer-to-simple-variable type, and the result of | 
					
						
							|  |  |  |  * dereferencing @ptr must be assignable to @x without a cast. | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * Caller must check the pointer with access_ok() before calling this | 
					
						
							|  |  |  |  * function. | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * Returns zero on success, or -EFAULT on error. | 
					
						
							|  |  |  |  * On error, the variable @x is set to zero. | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | #define __get_user(x,ptr) \
 | 
					
						
							|  |  |  | 	__get_user_nocheck((x),(ptr),sizeof(*(ptr))) | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | extern int __get_user_bad(void); | 
					
						
							|  |  |  | extern int __put_user_bad(void); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define __get_user_nocheck(x, ptr, size)				\
 | 
					
						
							|  |  |  | ({									\ | 
					
						
							| 
									
										
										
										
											2007-04-27 14:21:47 +02:00
										 |  |  | 	unsigned long __gu_val = 0;					\ | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 	int __gu_err = 0;						\ | 
					
						
							|  |  |  | 									\ | 
					
						
							|  |  |  | 	switch (size) {							\ | 
					
						
							|  |  |  | 	case 1: __get_user_asm("ub", __gu_val, ptr, __gu_err); break;	\ | 
					
						
							|  |  |  | 	case 2: __get_user_asm("uh", __gu_val, ptr, __gu_err); break;	\ | 
					
						
							|  |  |  | 	case 4: __get_user_asm("w", __gu_val, ptr, __gu_err); break;	\ | 
					
						
							|  |  |  | 	default: __gu_err = __get_user_bad(); break;			\ | 
					
						
							|  |  |  | 	}								\ | 
					
						
							|  |  |  | 									\ | 
					
						
							| 
									
										
										
										
											2007-04-27 14:21:47 +02:00
										 |  |  | 	x = (typeof(*(ptr)))__gu_val;					\ | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 	__gu_err;							\ | 
					
						
							|  |  |  | }) | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define __get_user_check(x, ptr, size)					\
 | 
					
						
							|  |  |  | ({									\ | 
					
						
							| 
									
										
										
										
											2007-04-27 14:21:47 +02:00
										 |  |  | 	unsigned long __gu_val = 0;					\ | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 	const typeof(*(ptr)) __user * __gu_addr = (ptr);		\ | 
					
						
							|  |  |  | 	int __gu_err = 0;						\ | 
					
						
							|  |  |  | 									\ | 
					
						
							|  |  |  | 	if (access_ok(VERIFY_READ, __gu_addr, size)) {			\ | 
					
						
							|  |  |  | 		switch (size) {						\ | 
					
						
							|  |  |  | 		case 1:							\ | 
					
						
							|  |  |  | 			__get_user_asm("ub", __gu_val, __gu_addr,	\ | 
					
						
							|  |  |  | 				       __gu_err);			\ | 
					
						
							|  |  |  | 			break;						\ | 
					
						
							|  |  |  | 		case 2:							\ | 
					
						
							|  |  |  | 			__get_user_asm("uh", __gu_val, __gu_addr,	\ | 
					
						
							|  |  |  | 				       __gu_err);			\ | 
					
						
							|  |  |  | 			break;						\ | 
					
						
							|  |  |  | 		case 4:							\ | 
					
						
							|  |  |  | 			__get_user_asm("w", __gu_val, __gu_addr,	\ | 
					
						
							|  |  |  | 				       __gu_err);			\ | 
					
						
							|  |  |  | 			break;						\ | 
					
						
							|  |  |  | 		default:						\ | 
					
						
							|  |  |  | 			__gu_err = __get_user_bad();			\ | 
					
						
							|  |  |  | 			break;						\ | 
					
						
							|  |  |  | 		}							\ | 
					
						
							|  |  |  | 	} else {							\ | 
					
						
							|  |  |  | 		__gu_err = -EFAULT;					\ | 
					
						
							|  |  |  | 	}								\ | 
					
						
							| 
									
										
										
										
											2007-04-27 14:21:47 +02:00
										 |  |  | 	x = (typeof(*(ptr)))__gu_val;					\ | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 	__gu_err;							\ | 
					
						
							|  |  |  | }) | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define __get_user_asm(suffix, __gu_val, ptr, __gu_err)			\
 | 
					
						
							|  |  |  | 	asm volatile(							\ | 
					
						
							|  |  |  | 		"1:	ld." suffix "	%1, %3			\n"	\ | 
					
						
							|  |  |  | 		"2:						\n"	\ | 
					
						
							| 
									
										
										
										
											2009-01-14 13:32:53 +01:00
										 |  |  | 		"	.subsection 1				\n"	\ | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 		"3:	mov	%0, %4				\n"	\ | 
					
						
							|  |  |  | 		"	rjmp	2b				\n"	\ | 
					
						
							| 
									
										
										
										
											2009-01-14 13:32:53 +01:00
										 |  |  | 		"	.subsection 0				\n"	\ | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 		"	.section __ex_table, \"a\"		\n"	\ | 
					
						
							|  |  |  | 		"	.long	1b, 3b				\n"	\ | 
					
						
							|  |  |  | 		"	.previous				\n"	\ | 
					
						
							|  |  |  | 		: "=r"(__gu_err), "=r"(__gu_val)			\ | 
					
						
							|  |  |  | 		: "0"(__gu_err), "m"(*(ptr)), "i"(-EFAULT)) | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define __put_user_nocheck(x, ptr, size)				\
 | 
					
						
							|  |  |  | ({									\ | 
					
						
							|  |  |  | 	typeof(*(ptr)) __pu_val;					\ | 
					
						
							|  |  |  | 	int __pu_err = 0;						\ | 
					
						
							|  |  |  | 									\ | 
					
						
							|  |  |  | 	__pu_val = (x);							\ | 
					
						
							|  |  |  | 	switch (size) {							\ | 
					
						
							|  |  |  | 	case 1: __put_user_asm("b", ptr, __pu_val, __pu_err); break;	\ | 
					
						
							|  |  |  | 	case 2: __put_user_asm("h", ptr, __pu_val, __pu_err); break;	\ | 
					
						
							|  |  |  | 	case 4: __put_user_asm("w", ptr, __pu_val, __pu_err); break;	\ | 
					
						
							|  |  |  | 	case 8: __put_user_asm("d", ptr, __pu_val, __pu_err); break;	\ | 
					
						
							|  |  |  | 	default: __pu_err = __put_user_bad(); break;			\ | 
					
						
							|  |  |  | 	}								\ | 
					
						
							|  |  |  | 	__pu_err;							\ | 
					
						
							|  |  |  | }) | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define __put_user_check(x, ptr, size)					\
 | 
					
						
							|  |  |  | ({									\ | 
					
						
							|  |  |  | 	typeof(*(ptr)) __pu_val;					\ | 
					
						
							|  |  |  | 	typeof(*(ptr)) __user *__pu_addr = (ptr);			\ | 
					
						
							|  |  |  | 	int __pu_err = 0;						\ | 
					
						
							|  |  |  | 									\ | 
					
						
							|  |  |  | 	__pu_val = (x);							\ | 
					
						
							|  |  |  | 	if (access_ok(VERIFY_WRITE, __pu_addr, size)) {			\ | 
					
						
							|  |  |  | 		switch (size) {						\ | 
					
						
							|  |  |  | 		case 1:							\ | 
					
						
							|  |  |  | 			__put_user_asm("b", __pu_addr, __pu_val,	\ | 
					
						
							|  |  |  | 				       __pu_err);			\ | 
					
						
							|  |  |  | 			break;						\ | 
					
						
							|  |  |  | 		case 2:							\ | 
					
						
							|  |  |  | 			__put_user_asm("h", __pu_addr, __pu_val,	\ | 
					
						
							|  |  |  | 				       __pu_err);			\ | 
					
						
							|  |  |  | 			break;						\ | 
					
						
							|  |  |  | 		case 4:							\ | 
					
						
							|  |  |  | 			__put_user_asm("w", __pu_addr, __pu_val,	\ | 
					
						
							|  |  |  | 				       __pu_err);			\ | 
					
						
							|  |  |  | 			break;						\ | 
					
						
							|  |  |  | 		case 8:							\ | 
					
						
							|  |  |  | 			__put_user_asm("d", __pu_addr, __pu_val,		\ | 
					
						
							|  |  |  | 				       __pu_err);			\ | 
					
						
							|  |  |  | 			break;						\ | 
					
						
							|  |  |  | 		default:						\ | 
					
						
							|  |  |  | 			__pu_err = __put_user_bad();			\ | 
					
						
							|  |  |  | 			break;						\ | 
					
						
							|  |  |  | 		}							\ | 
					
						
							|  |  |  | 	} else {							\ | 
					
						
							|  |  |  | 		__pu_err = -EFAULT;					\ | 
					
						
							|  |  |  | 	}								\ | 
					
						
							|  |  |  | 	__pu_err;							\ | 
					
						
							|  |  |  | }) | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define __put_user_asm(suffix, ptr, __pu_val, __gu_err)			\
 | 
					
						
							|  |  |  | 	asm volatile(							\ | 
					
						
							|  |  |  | 		"1:	st." suffix "	%1, %3			\n"	\ | 
					
						
							|  |  |  | 		"2:						\n"	\ | 
					
						
							| 
									
										
										
										
											2009-01-14 13:32:53 +01:00
										 |  |  | 		"	.subsection 1				\n"	\ | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 		"3:	mov	%0, %4				\n"	\ | 
					
						
							|  |  |  | 		"	rjmp	2b				\n"	\ | 
					
						
							| 
									
										
										
										
											2009-01-14 13:32:53 +01:00
										 |  |  | 		"	.subsection 0				\n"	\ | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 		"	.section __ex_table, \"a\"		\n"	\ | 
					
						
							|  |  |  | 		"	.long	1b, 3b				\n"	\ | 
					
						
							|  |  |  | 		"	.previous				\n"	\ | 
					
						
							|  |  |  | 		: "=r"(__gu_err), "=m"(*(ptr))				\ | 
					
						
							|  |  |  | 		: "0"(__gu_err), "r"(__pu_val), "i"(-EFAULT)) | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | extern __kernel_size_t clear_user(void __user *addr, __kernel_size_t size); | 
					
						
							|  |  |  | extern __kernel_size_t __clear_user(void __user *addr, __kernel_size_t size); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | extern long strncpy_from_user(char *dst, const char __user *src, long count); | 
					
						
							|  |  |  | extern long __strncpy_from_user(char *dst, const char __user *src, long count); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | extern long strnlen_user(const char __user *__s, long __n); | 
					
						
							|  |  |  | extern long __strnlen_user(const char __user *__s, long __n); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define strlen_user(s) strnlen_user(s, ~0UL >> 1)
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | struct exception_table_entry | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	unsigned long insn, fixup; | 
					
						
							|  |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #endif /* __ASM_AVR32_UACCESS_H */
 |