linux-pinenote/arch/arm/mach-davinci/cdce949.c

/*
 * TI CDCE949 clock synthesizer driver
 *
 * Note: This implementation assumes an input of 27MHz to the CDCE.
 * This is by no means constrained by CDCE hardware although the datasheet
 * does use this as an example for all illustrations and more importantly:
 * that is the crystal input on boards it is currently used on.
 *
 * Copyright (C) 2009 Texas Instruments Incorporated. http://www.ti.com/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 */
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/module.h>

#include <mach/clock.h>
#include <mach/cdce949.h>

#include "clock.h"

static struct i2c_client *cdce_i2c_client;
static DEFINE_MUTEX(cdce_mutex);

/* CDCE register descriptor */
struct cdce_reg {
	u8	addr;
	u8	val;
};

/* Per-Output (Y1, Y2 etc.) frequency descriptor */
struct cdce_freq {
	/* Frequency in KHz */
	unsigned long frequency;
	/*
	 * List of registers to program to obtain a particular frequency.
	 * 0x0 in register address and value is the end of list marker.
	 */
	struct cdce_reg *reglist;
};

#define CDCE_FREQ_TABLE_ENTRY(line, out)		\
{							\
	.reglist	= cdce_y ##line## _ ##out,		\
	.frequency	= out,				\
}

/* List of CDCE outputs  */
struct cdce_output {
	/* List of frequencies on this output */
	struct cdce_freq *freq_table;
	/* Number of possible frequencies */
	int size;
};

/*
 * Finding out the values to program into CDCE949 registers for a particular
 * frequency output is not a simple calculation. Have a look at the datasheet
 * for the details. There is desktop software available to help users with
 * the calculations. Here, we just depend on the output of that software
 * (or hand calculations) instead trying to runtime calculate the register
 * values and inflicting misery on ourselves.
 */
static struct cdce_reg cdce_y1_148500[] = {
	{ 0x13, 0x00 },
	/* program PLL1_0 multiplier */
	{ 0x18, 0xaf },
	{ 0x19, 0x50 },
	{ 0x1a, 0x02 },
	{ 0x1b, 0xc9 },
	/* program PLL1_11 multiplier */
	{ 0x1c, 0x00 },
	{ 0x1d, 0x40 },
	{ 0x1e, 0x02 },
	{ 0x1f, 0xc9 },
	/* output state selection */
	{ 0x15, 0x00 },
	{ 0x14, 0xef },
	/* switch MUX to PLL1 output */
	{ 0x14, 0x6f },
	{ 0x16, 0x06 },
	/* set P2DIV divider, P3DIV and input crystal */
	{ 0x17, 0x06 },
	{ 0x01, 0x00 },
	{ 0x05, 0x48 },
	{ 0x02, 0x80 },
	/* enable and disable PLL */
	{ 0x02, 0xbc },
	{ 0x03, 0x01 },
	{ },
};

static struct cdce_reg cdce_y1_74250[] = {
	{ 0x13, 0x00 },
	{ 0x18, 0xaf },
	{ 0x19, 0x50 },
	{ 0x1a, 0x02 },
	{ 0x1b, 0xc9 },
	{ 0x1c, 0x00 },
	{ 0x1d, 0x40 },
	{ 0x1e, 0x02 },
	{ 0x1f, 0xc9 },
	/* output state selection */
	{ 0x15, 0x00 },
	{ 0x14, 0xef },
	/* switch MUX to PLL1 output */
	{ 0x14, 0x6f },
	{ 0x16, 0x06 },
	/* set P2DIV divider, P3DIV and input crystal */
	{ 0x17, 0x06 },
	{ 0x01, 0x00 },
	{ 0x05, 0x48 },
	{ 0x02, 0x80 },
	/* enable and disable PLL */
	{ 0x02, 0xbc },
	{ 0x03, 0x02 },
	{ },
};

static struct cdce_reg cdce_y1_27000[] = {
	{ 0x13, 0x00 },
	{ 0x18, 0x00 },
	{ 0x19, 0x40 },
	{ 0x1a, 0x02 },
	{ 0x1b, 0x08 },
	{ 0x1c, 0x00 },
	{ 0x1d, 0x40 },
	{ 0x1e, 0x02 },
	{ 0x1f, 0x08 },
	{ 0x15, 0x02 },
	{ 0x14, 0xed },
	{ 0x16, 0x01 },
	{ 0x17, 0x01 },
	{ 0x01, 0x00 },
	{ 0x05, 0x50 },
	{ 0x02, 0xb4 },
	{ 0x03, 0x01 },
	{ },
};

static struct cdce_freq cdce_y1_freqs[] = {
	CDCE_FREQ_TABLE_ENTRY(1, 148500),
	CDCE_FREQ_TABLE_ENTRY(1, 74250),
	CDCE_FREQ_TABLE_ENTRY(1, 27000),
};

static struct cdce_reg cdce_y5_13500[] = {
	{ 0x27, 0x08 },
	{ 0x28, 0x00 },
	{ 0x29, 0x40 },
	{ 0x2a, 0x02 },
	{ 0x2b, 0x08 },
	{ 0x24, 0x6f },
	{ },
};

static struct cdce_reg cdce_y5_16875[] = {
	{ 0x27, 0x08 },
	{ 0x28, 0x9f },
	{ 0x29, 0xb0 },
	{ 0x2a, 0x02 },
	{ 0x2b, 0x89 },
	{ 0x24, 0x6f },
	{ },
};

static struct cdce_reg cdce_y5_27000[] = {
	{ 0x27, 0x04 },
	{ 0x28, 0x00 },
	{ 0x29, 0x40 },
	{ 0x2a, 0x02 },
	{ 0x2b, 0x08 },
	{ 0x24, 0x6f },
	{ },
};
static struct cdce_reg cdce_y5_54000[] = {
	{ 0x27, 0x04 },
	{ 0x28, 0xff },
	{ 0x29, 0x80 },
	{ 0x2a, 0x02 },
	{ 0x2b, 0x07 },
	{ 0x24, 0x6f },
	{ },
};

static struct cdce_reg cdce_y5_81000[] = {
	{ 0x27, 0x02 },
	{ 0x28, 0xbf },
	{ 0x29, 0xa0 },
	{ 0x2a, 0x03 },
	{ 0x2b, 0x0a },
	{ 0x24, 0x6f },
	{ },
};

static struct cdce_freq cdce_y5_freqs[] = {
	CDCE_FREQ_TABLE_ENTRY(5, 13500),
	CDCE_FREQ_TABLE_ENTRY(5, 16875),
	CDCE_FREQ_TABLE_ENTRY(5, 27000),
	CDCE_FREQ_TABLE_ENTRY(5, 54000),
	CDCE_FREQ_TABLE_ENTRY(5, 81000),
};


static struct cdce_output output_list[] = {
	[1]	= { cdce_y1_freqs, ARRAY_SIZE(cdce_y1_freqs) },
	[5]	= { cdce_y5_freqs, ARRAY_SIZE(cdce_y5_freqs) },
};

int cdce_set_rate(struct clk *clk, unsigned long rate)
{
	int i, ret = 0;
	struct cdce_freq *freq_table = output_list[clk->lpsc].freq_table;
	struct cdce_reg  *regs = NULL;

	if (!cdce_i2c_client)
		return -ENODEV;

	if (!freq_table)
		return -EINVAL;

	for (i = 0; i < output_list[clk->lpsc].size; i++) {
		if (freq_table[i].frequency == rate / 1000) {
			regs = freq_table[i].reglist;
			break;
		}
	}

	if (!regs)
		return -EINVAL;

	mutex_lock(&cdce_mutex);
	for (i = 0; regs[i].addr; i++) {
		ret = i2c_smbus_write_byte_data(cdce_i2c_client,
					regs[i].addr | 0x80, regs[i].val);
		if (ret)
			break;
	}
	mutex_unlock(&cdce_mutex);

	if (!ret)
		clk->rate = rate;

	return ret;
}

static int cdce_probe(struct i2c_client *client,
					const struct i2c_device_id *id)
{
	cdce_i2c_client = client;
	return 0;
}

static int cdce_remove(struct i2c_client *client)
{
	cdce_i2c_client = NULL;
	return 0;
}

static const struct i2c_device_id cdce_id[] = {
	{"cdce949", 0},
	{},
};
MODULE_DEVICE_TABLE(i2c, cdce_id);

static struct i2c_driver cdce_driver = {
	.driver = {
		.owner	= THIS_MODULE,
		.name	= "cdce949",
	},
	.probe		= cdce_probe,
	.remove		= cdce_remove,
	.id_table	= cdce_id,
};

static int __init cdce_init(void)
{
	return i2c_add_driver(&cdce_driver);
}
subsys_initcall(cdce_init);

static void __exit cdce_exit(void)
{
	i2c_del_driver(&cdce_driver);
}
module_exit(cdce_exit);

MODULE_AUTHOR("Texas Instruments");
MODULE_DESCRIPTION("CDCE949 clock synthesizer driver");
MODULE_LICENSE("GPL v2");