forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
linux-pinenote/arch/powerpc/kernel/cpu_setup_6xx.S

490 lines
11 KiB
ArmAsm
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* This file contains low level CPU setup functions.
* Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/cputable.h>
#include <asm/ppc_asm.h>
kbuild: m68k,parisc,ppc,ppc64,s390,xtensa use generic asm-offsets.h support Delete obsoleted parts form arch makefiles and rename to asm-offsets.h Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-09 20:57:26 +02:00
#include <asm/asm-offsets.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#include <asm/cache.h>
powerpc/mm: e300c2/c3/c4 TLB errata workaround Complete workaround for DTLB errata in e300c2/c3/c4 processors. Due to the bug, the hardware-implemented LRU algorythm always goes to way 1 of the TLB. This fix implements the proposed software workaround in form of a LRW table for chosing the TLB-way. Based on patch from David Jander <david@protonic.nl> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-19 03:55:41 +00:00
#include <asm/mmu.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
_GLOBAL(__setup_cpu_603)
powerpc: Fix some 6xx/7xxx CPU setup functions Some of those functions try to adjust the CPU features, for example to remove NAP support on some revisions. However, they seem to use r5 as an index into the CPU table entry, which might have been right a long time ago but no longer is. r4 is the right register to use. This probably caused some off behaviours on some PowerMac variants using 750cx or 7455 processor revisions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@kernel.org
2011-01-20 20:35:23 +00:00
mflr r5
powerpc/mm: e300c2/c3/c4 TLB errata workaround Complete workaround for DTLB errata in e300c2/c3/c4 processors. Due to the bug, the hardware-implemented LRU algorythm always goes to way 1 of the TLB. This fix implements the proposed software workaround in form of a LRW table for chosing the TLB-way. Based on patch from David Jander <david@protonic.nl> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-19 03:55:41 +00:00
BEGIN_MMU_FTR_SECTION
li r10,0
powerpc: Use names rather than numbers for SPRGs (v2) The kernel uses SPRG registers for various purposes, typically in low level assembly code as scratch registers or to hold per-cpu global infos such as the PACA or the current thread_info pointer. We want to be able to easily shuffle the usage of those registers as some implementations have specific constraints realted to some of them, for example, some have userspace readable aliases, etc.. and the current choice isn't always the best. This patch should not change any code generation, and replaces the usage of SPRN_SPRGn everywhere in the kernel with a named replacement and adds documentation next to the definition of the names as to what those are used for on each processor family. The only parts that still use the original numbers are bits of KVM or suspend/resume code that just blindly needs to save/restore all the SPRGs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-14 20:52:54 +00:00
mtspr SPRN_SPRG_603_LRU,r10 /* init SW LRU tracking */
powerpc/mm: e300c2/c3/c4 TLB errata workaround Complete workaround for DTLB errata in e300c2/c3/c4 processors. Due to the bug, the hardware-implemented LRU algorythm always goes to way 1 of the TLB. This fix implements the proposed software workaround in form of a LRW table for chosing the TLB-way. Based on patch from David Jander <david@protonic.nl> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-19 03:55:41 +00:00
END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
[POWERPC] ppc32: Fix errata for 603 CPUs 603 CPUs have the same issue that some 750 CPUs have in that they can crash in funny ways if a store from an FPU register instruction is executed on a register that has never been initialized since power on. This patch fixes it by making sure all FP registers have been properly initialized at kernel boot. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-21 14:09:44 -05:00
BEGIN_FTR_SECTION
bl __init_fpu_registers
END_FTR_SECTION_IFCLR(CPU_FTR_FPU_UNAVAILABLE)
bl setup_common_caches
powerpc: Fix some 6xx/7xxx CPU setup functions Some of those functions try to adjust the CPU features, for example to remove NAP support on some revisions. However, they seem to use r5 as an index into the CPU table entry, which might have been right a long time ago but no longer is. r4 is the right register to use. This probably caused some off behaviours on some PowerMac variants using 750cx or 7455 processor revisions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@kernel.org
2011-01-20 20:35:23 +00:00
mtlr r5
[POWERPC] ppc32: Fix errata for 603 CPUs 603 CPUs have the same issue that some 750 CPUs have in that they can crash in funny ways if a store from an FPU register instruction is executed on a register that has never been initialized since power on. This patch fixes it by making sure all FP registers have been properly initialized at kernel boot. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-21 14:09:44 -05:00
blr
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
_GLOBAL(__setup_cpu_604)
powerpc: Fix some 6xx/7xxx CPU setup functions Some of those functions try to adjust the CPU features, for example to remove NAP support on some revisions. However, they seem to use r5 as an index into the CPU table entry, which might have been right a long time ago but no longer is. r4 is the right register to use. This probably caused some off behaviours on some PowerMac variants using 750cx or 7455 processor revisions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@kernel.org
2011-01-20 20:35:23 +00:00
mflr r5
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
bl setup_common_caches
bl setup_604_hid0
powerpc: Fix some 6xx/7xxx CPU setup functions Some of those functions try to adjust the CPU features, for example to remove NAP support on some revisions. However, they seem to use r5 as an index into the CPU table entry, which might have been right a long time ago but no longer is. r4 is the right register to use. This probably caused some off behaviours on some PowerMac variants using 750cx or 7455 processor revisions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@kernel.org
2011-01-20 20:35:23 +00:00
mtlr r5
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
blr
_GLOBAL(__setup_cpu_750)
powerpc: Fix some 6xx/7xxx CPU setup functions Some of those functions try to adjust the CPU features, for example to remove NAP support on some revisions. However, they seem to use r5 as an index into the CPU table entry, which might have been right a long time ago but no longer is. r4 is the right register to use. This probably caused some off behaviours on some PowerMac variants using 750cx or 7455 processor revisions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@kernel.org
2011-01-20 20:35:23 +00:00
mflr r5
[PATCH] ppc32: Fix errata for some G3 CPUs Some G3 CPUs can crash in funny way if a store from an FPU register instruction is executed on a register that has never been initialized since power on. This patch fixes it by making sure all FP registers have been properly initialized at kernel boot and when waking from sleep. It also makes the code that decides wether HID0_BTIC and HID0_DPM are allowed on a given CPU smarter (it can actually _clear_ them now if they are not allowed instead of just setting them when they are allowed in case the firmware got them wrong) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:58:40 -07:00
bl __init_fpu_registers
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
bl setup_common_caches
bl setup_750_7400_hid0
powerpc: Fix some 6xx/7xxx CPU setup functions Some of those functions try to adjust the CPU features, for example to remove NAP support on some revisions. However, they seem to use r5 as an index into the CPU table entry, which might have been right a long time ago but no longer is. r4 is the right register to use. This probably caused some off behaviours on some PowerMac variants using 750cx or 7455 processor revisions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@kernel.org
2011-01-20 20:35:23 +00:00
mtlr r5
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
blr
_GLOBAL(__setup_cpu_750cx)
powerpc: Fix some 6xx/7xxx CPU setup functions Some of those functions try to adjust the CPU features, for example to remove NAP support on some revisions. However, they seem to use r5 as an index into the CPU table entry, which might have been right a long time ago but no longer is. r4 is the right register to use. This probably caused some off behaviours on some PowerMac variants using 750cx or 7455 processor revisions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@kernel.org
2011-01-20 20:35:23 +00:00
mflr r5
[PATCH] ppc32: Fix errata for some G3 CPUs Some G3 CPUs can crash in funny way if a store from an FPU register instruction is executed on a register that has never been initialized since power on. This patch fixes it by making sure all FP registers have been properly initialized at kernel boot and when waking from sleep. It also makes the code that decides wether HID0_BTIC and HID0_DPM are allowed on a given CPU smarter (it can actually _clear_ them now if they are not allowed instead of just setting them when they are allowed in case the firmware got them wrong) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:58:40 -07:00
bl __init_fpu_registers
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
bl setup_common_caches
bl setup_750_7400_hid0
bl setup_750cx
powerpc: Fix some 6xx/7xxx CPU setup functions Some of those functions try to adjust the CPU features, for example to remove NAP support on some revisions. However, they seem to use r5 as an index into the CPU table entry, which might have been right a long time ago but no longer is. r4 is the right register to use. This probably caused some off behaviours on some PowerMac variants using 750cx or 7455 processor revisions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@kernel.org
2011-01-20 20:35:23 +00:00
mtlr r5
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
blr
_GLOBAL(__setup_cpu_750fx)
powerpc: Fix some 6xx/7xxx CPU setup functions Some of those functions try to adjust the CPU features, for example to remove NAP support on some revisions. However, they seem to use r5 as an index into the CPU table entry, which might have been right a long time ago but no longer is. r4 is the right register to use. This probably caused some off behaviours on some PowerMac variants using 750cx or 7455 processor revisions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@kernel.org
2011-01-20 20:35:23 +00:00
mflr r5
[PATCH] ppc32: Fix errata for some G3 CPUs Some G3 CPUs can crash in funny way if a store from an FPU register instruction is executed on a register that has never been initialized since power on. This patch fixes it by making sure all FP registers have been properly initialized at kernel boot and when waking from sleep. It also makes the code that decides wether HID0_BTIC and HID0_DPM are allowed on a given CPU smarter (it can actually _clear_ them now if they are not allowed instead of just setting them when they are allowed in case the firmware got them wrong) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:58:40 -07:00
bl __init_fpu_registers
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
bl setup_common_caches
bl setup_750_7400_hid0
bl setup_750fx
powerpc: Fix some 6xx/7xxx CPU setup functions Some of those functions try to adjust the CPU features, for example to remove NAP support on some revisions. However, they seem to use r5 as an index into the CPU table entry, which might have been right a long time ago but no longer is. r4 is the right register to use. This probably caused some off behaviours on some PowerMac variants using 750cx or 7455 processor revisions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@kernel.org
2011-01-20 20:35:23 +00:00
mtlr r5
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
blr
_GLOBAL(__setup_cpu_7400)
powerpc: Fix some 6xx/7xxx CPU setup functions Some of those functions try to adjust the CPU features, for example to remove NAP support on some revisions. However, they seem to use r5 as an index into the CPU table entry, which might have been right a long time ago but no longer is. r4 is the right register to use. This probably caused some off behaviours on some PowerMac variants using 750cx or 7455 processor revisions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@kernel.org
2011-01-20 20:35:23 +00:00
mflr r5
[PATCH] ppc32: Fix errata for some G3 CPUs Some G3 CPUs can crash in funny way if a store from an FPU register instruction is executed on a register that has never been initialized since power on. This patch fixes it by making sure all FP registers have been properly initialized at kernel boot and when waking from sleep. It also makes the code that decides wether HID0_BTIC and HID0_DPM are allowed on a given CPU smarter (it can actually _clear_ them now if they are not allowed instead of just setting them when they are allowed in case the firmware got them wrong) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:58:40 -07:00
bl __init_fpu_registers
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
bl setup_7400_workarounds
bl setup_common_caches
bl setup_750_7400_hid0
powerpc: Fix some 6xx/7xxx CPU setup functions Some of those functions try to adjust the CPU features, for example to remove NAP support on some revisions. However, they seem to use r5 as an index into the CPU table entry, which might have been right a long time ago but no longer is. r4 is the right register to use. This probably caused some off behaviours on some PowerMac variants using 750cx or 7455 processor revisions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@kernel.org
2011-01-20 20:35:23 +00:00
mtlr r5
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
blr
_GLOBAL(__setup_cpu_7410)
powerpc: Fix some 6xx/7xxx CPU setup functions Some of those functions try to adjust the CPU features, for example to remove NAP support on some revisions. However, they seem to use r5 as an index into the CPU table entry, which might have been right a long time ago but no longer is. r4 is the right register to use. This probably caused some off behaviours on some PowerMac variants using 750cx or 7455 processor revisions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@kernel.org
2011-01-20 20:35:23 +00:00
mflr r5
[PATCH] ppc32: Fix errata for some G3 CPUs Some G3 CPUs can crash in funny way if a store from an FPU register instruction is executed on a register that has never been initialized since power on. This patch fixes it by making sure all FP registers have been properly initialized at kernel boot and when waking from sleep. It also makes the code that decides wether HID0_BTIC and HID0_DPM are allowed on a given CPU smarter (it can actually _clear_ them now if they are not allowed instead of just setting them when they are allowed in case the firmware got them wrong) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:58:40 -07:00
bl __init_fpu_registers
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
bl setup_7410_workarounds
bl setup_common_caches
bl setup_750_7400_hid0
li r3,0
mtspr SPRN_L2CR2,r3
powerpc: Fix some 6xx/7xxx CPU setup functions Some of those functions try to adjust the CPU features, for example to remove NAP support on some revisions. However, they seem to use r5 as an index into the CPU table entry, which might have been right a long time ago but no longer is. r4 is the right register to use. This probably caused some off behaviours on some PowerMac variants using 750cx or 7455 processor revisions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@kernel.org
2011-01-20 20:35:23 +00:00
mtlr r5
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
blr
_GLOBAL(__setup_cpu_745x)
powerpc: Fix some 6xx/7xxx CPU setup functions Some of those functions try to adjust the CPU features, for example to remove NAP support on some revisions. However, they seem to use r5 as an index into the CPU table entry, which might have been right a long time ago but no longer is. r4 is the right register to use. This probably caused some off behaviours on some PowerMac variants using 750cx or 7455 processor revisions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@kernel.org
2011-01-20 20:35:23 +00:00
mflr r5
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
bl setup_common_caches
bl setup_745x_specifics
powerpc: Fix some 6xx/7xxx CPU setup functions Some of those functions try to adjust the CPU features, for example to remove NAP support on some revisions. However, they seem to use r5 as an index into the CPU table entry, which might have been right a long time ago but no longer is. r4 is the right register to use. This probably caused some off behaviours on some PowerMac variants using 750cx or 7455 processor revisions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@kernel.org
2011-01-20 20:35:23 +00:00
mtlr r5
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
blr
/* Enable caches for 603's, 604, 750 & 7400 */
setup_common_caches:
mfspr r11,SPRN_HID0
andi. r0,r11,HID0_DCE
ori r11,r11,HID0_ICE|HID0_DCE
ori r8,r11,HID0_ICFI
bne 1f /* don't invalidate the D-cache */
ori r8,r8,HID0_DCI /* unless it wasn't enabled */
1: sync
[PATCH] ppc32: Fix errata for some G3 CPUs Some G3 CPUs can crash in funny way if a store from an FPU register instruction is executed on a register that has never been initialized since power on. This patch fixes it by making sure all FP registers have been properly initialized at kernel boot and when waking from sleep. It also makes the code that decides wether HID0_BTIC and HID0_DPM are allowed on a given CPU smarter (it can actually _clear_ them now if they are not allowed instead of just setting them when they are allowed in case the firmware got them wrong) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:58:40 -07:00
mtspr SPRN_HID0,r8 /* enable and invalidate caches */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
sync
mtspr SPRN_HID0,r11 /* enable caches */
sync
isync
blr
/* 604, 604e, 604ev, ...
* Enable superscalar execution & branch history table
*/
setup_604_hid0:
mfspr r11,SPRN_HID0
ori r11,r11,HID0_SIED|HID0_BHTE
ori r8,r11,HID0_BTCD
sync
mtspr SPRN_HID0,r8 /* flush branch target address cache */
sync /* on 604e/604r */
mtspr SPRN_HID0,r11
sync
isync
blr
/* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some
* erratas we work around here.
* Moto MPC710CE.pdf describes them, those are errata
* #3, #4 and #5
* Note that we assume the firmware didn't choose to
* apply other workarounds (there are other ones documented
* in the .pdf). It appear that Apple firmware only works
* around #3 and with the same fix we use. We may want to
* check if the CPU is using 60x bus mode in which case
* the workaround for errata #4 is useless. Also, we may
Spelling fix: explicitly From: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19 23:22:55 +02:00
* want to explicitly clear HID0_NOPDST as this is not
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
* needed once we have applied workaround #5 (though it's
* not set by Apple's firmware at least).
*/
setup_7400_workarounds:
mfpvr r3
rlwinm r3,r3,0,20,31
cmpwi 0,r3,0x0207
ble 1f
blr
setup_7410_workarounds:
mfpvr r3
rlwinm r3,r3,0,20,31
cmpwi 0,r3,0x0100
bnelr
1:
mfspr r11,SPRN_MSSSR0
/* Errata #3: Set L1OPQ_SIZE to 0x10 */
rlwinm r11,r11,0,9,6
oris r11,r11,0x0100
/* Errata #4: Set L2MQ_SIZE to 1 (check for MPX mode first ?) */
oris r11,r11,0x0002
/* Errata #5: Set DRLT_SIZE to 0x01 */
rlwinm r11,r11,0,5,2
oris r11,r11,0x0800
sync
mtspr SPRN_MSSSR0,r11
sync
isync
blr
/* 740/750/7400/7410
* Enable Store Gathering (SGE), Address Brodcast (ABE),
* Branch History Table (BHTE), Branch Target ICache (BTIC)
* Dynamic Power Management (DPM), Speculative (SPD)
* Clear Instruction cache throttling (ICTC)
*/
setup_750_7400_hid0:
mfspr r11,SPRN_HID0
ori r11,r11,HID0_SGE | HID0_ABE | HID0_BHTE | HID0_BTIC
[PATCH] ppc32: Fix errata for some G3 CPUs Some G3 CPUs can crash in funny way if a store from an FPU register instruction is executed on a register that has never been initialized since power on. This patch fixes it by making sure all FP registers have been properly initialized at kernel boot and when waking from sleep. It also makes the code that decides wether HID0_BTIC and HID0_DPM are allowed on a given CPU smarter (it can actually _clear_ them now if they are not allowed instead of just setting them when they are allowed in case the firmware got them wrong) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:58:40 -07:00
oris r11,r11,HID0_DPM@h
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
BEGIN_FTR_SECTION
[PATCH] ppc32: Fix errata for some G3 CPUs Some G3 CPUs can crash in funny way if a store from an FPU register instruction is executed on a register that has never been initialized since power on. This patch fixes it by making sure all FP registers have been properly initialized at kernel boot and when waking from sleep. It also makes the code that decides wether HID0_BTIC and HID0_DPM are allowed on a given CPU smarter (it can actually _clear_ them now if they are not allowed instead of just setting them when they are allowed in case the firmware got them wrong) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:58:40 -07:00
xori r11,r11,HID0_BTIC
END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC)
BEGIN_FTR_SECTION
xoris r11,r11,HID0_DPM@h /* disable dynamic power mgmt */
END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
li r3,HID0_SPD
andc r11,r11,r3 /* clear SPD: enable speculative */
li r3,0
mtspr SPRN_ICTC,r3 /* Instruction Cache Throttling off */
isync
mtspr SPRN_HID0,r11
sync
isync
blr
/* 750cx specific
* Looks like we have to disable NAP feature for some PLL settings...
* (waiting for confirmation)
*/
setup_750cx:
mfspr r10, SPRN_HID1
rlwinm r10,r10,4,28,31
cmpwi cr0,r10,7
cmpwi cr1,r10,9
cmpwi cr2,r10,11
cror 4*cr0+eq,4*cr0+eq,4*cr1+eq
cror 4*cr0+eq,4*cr0+eq,4*cr2+eq
bnelr
powerpc: Fix some 6xx/7xxx CPU setup functions Some of those functions try to adjust the CPU features, for example to remove NAP support on some revisions. However, they seem to use r5 as an index into the CPU table entry, which might have been right a long time ago but no longer is. r4 is the right register to use. This probably caused some off behaviours on some PowerMac variants using 750cx or 7455 processor revisions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@kernel.org
2011-01-20 20:35:23 +00:00
lwz r6,CPU_SPEC_FEATURES(r4)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
li r7,CPU_FTR_CAN_NAP
andc r6,r6,r7
powerpc: Fix some 6xx/7xxx CPU setup functions Some of those functions try to adjust the CPU features, for example to remove NAP support on some revisions. However, they seem to use r5 as an index into the CPU table entry, which might have been right a long time ago but no longer is. r4 is the right register to use. This probably caused some off behaviours on some PowerMac variants using 750cx or 7455 processor revisions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@kernel.org
2011-01-20 20:35:23 +00:00
stw r6,CPU_SPEC_FEATURES(r4)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
blr
/* 750fx specific
*/
setup_750fx:
blr
/* MPC 745x
* Enable Store Gathering (SGE), Branch Folding (FOLD)
* Branch History Table (BHTE), Branch Target ICache (BTIC)
* Dynamic Power Management (DPM), Speculative (SPD)
* Ensure our data cache instructions really operate.
* Timebase has to be running or we wouldn't have made it here,
* just ensure we don't disable it.
* Clear Instruction cache throttling (ICTC)
* Enable L2 HW prefetch
*/
setup_745x_specifics:
/* We check for the presence of an L3 cache setup by
* the firmware. If any, we disable NAP capability as
* it's known to be bogus on rev 2.1 and earlier
*/
[POWERPC] Guard L3CR references with CPU_FTR_L3CR. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-17 17:49:42 -05:00
BEGIN_FTR_SECTION
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
mfspr r11,SPRN_L3CR
andis. r11,r11,L3CR_L3E@h
beq 1f
[POWERPC] Guard L3CR references with CPU_FTR_L3CR. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-17 17:49:42 -05:00
END_FTR_SECTION_IFSET(CPU_FTR_L3CR)
powerpc: Fix some 6xx/7xxx CPU setup functions Some of those functions try to adjust the CPU features, for example to remove NAP support on some revisions. However, they seem to use r5 as an index into the CPU table entry, which might have been right a long time ago but no longer is. r4 is the right register to use. This probably caused some off behaviours on some PowerMac variants using 750cx or 7455 processor revisions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@kernel.org
2011-01-20 20:35:23 +00:00
lwz r6,CPU_SPEC_FEATURES(r4)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
andi. r0,r6,CPU_FTR_L3_DISABLE_NAP
beq 1f
li r7,CPU_FTR_CAN_NAP
andc r6,r6,r7
powerpc: Fix some 6xx/7xxx CPU setup functions Some of those functions try to adjust the CPU features, for example to remove NAP support on some revisions. However, they seem to use r5 as an index into the CPU table entry, which might have been right a long time ago but no longer is. r4 is the right register to use. This probably caused some off behaviours on some PowerMac variants using 750cx or 7455 processor revisions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@kernel.org
2011-01-20 20:35:23 +00:00
stw r6,CPU_SPEC_FEATURES(r4)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
1:
mfspr r11,SPRN_HID0
/* All of the bits we have to set.....
*/
[PATCH] ppc32: Fix errata for some G3 CPUs Some G3 CPUs can crash in funny way if a store from an FPU register instruction is executed on a register that has never been initialized since power on. This patch fixes it by making sure all FP registers have been properly initialized at kernel boot and when waking from sleep. It also makes the code that decides wether HID0_BTIC and HID0_DPM are allowed on a given CPU smarter (it can actually _clear_ them now if they are not allowed instead of just setting them when they are allowed in case the firmware got them wrong) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:58:40 -07:00
ori r11,r11,HID0_SGE | HID0_FOLD | HID0_BHTE
ori r11,r11,HID0_LRSTK | HID0_BTIC
oris r11,r11,HID0_DPM@h
powerpc: Enable additional BAT registers in setup_745x_specifics() Currently the kernel expects the additional four IBAT and DBAT registers to be available, but doesn't enable these registers on 745x CPUs, which have them disabled after reset. Thus set the HIGH_BAT_EN bit in HID0 register, if the corresponding MMU feature is defined. Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-06 11:12:36 +00:00
BEGIN_MMU_FTR_SECTION
oris r11,r11,HID0_HIGH_BAT@h
END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
BEGIN_FTR_SECTION
xori r11,r11,HID0_BTIC
END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC)
BEGIN_FTR_SECTION
[PATCH] ppc32: Fix errata for some G3 CPUs Some G3 CPUs can crash in funny way if a store from an FPU register instruction is executed on a register that has never been initialized since power on. This patch fixes it by making sure all FP registers have been properly initialized at kernel boot and when waking from sleep. It also makes the code that decides wether HID0_BTIC and HID0_DPM are allowed on a given CPU smarter (it can actually _clear_ them now if they are not allowed instead of just setting them when they are allowed in case the firmware got them wrong) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:58:40 -07:00
xoris r11,r11,HID0_DPM@h /* disable dynamic power mgmt */
END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* All of the bits we have to clear....
*/
li r3,HID0_SPD | HID0_NOPDST | HID0_NOPTI
andc r11,r11,r3 /* clear SPD: enable speculative */
li r3,0
mtspr SPRN_ICTC,r3 /* Instruction Cache Throttling off */
isync
mtspr SPRN_HID0,r11
sync
isync
[PATCH] ppc: L2 cache prefetch fixes on 745x We run into problems if we blindly enable L2 prefetching without checking that the L2 cache is actually enabled. Additionaly, if we disable the L2 cache we need to ensure that we disable L2 prefetching. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-31 14:54:47 +10:00
/* Enable L2 HW prefetch, if L2 is enabled
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
*/
[PATCH] ppc: L2 cache prefetch fixes on 745x We run into problems if we blindly enable L2 prefetching without checking that the L2 cache is actually enabled. Additionaly, if we disable the L2 cache we need to ensure that we disable L2 prefetching. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-31 14:54:47 +10:00
mfspr r3,SPRN_L2CR
andis. r3,r3,L2CR_L2E@h
beqlr
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
mfspr r3,SPRN_MSSCR0
ori r3,r3,3
sync
mtspr SPRN_MSSCR0,r3
sync
isync
blr
[PATCH] ppc32: Fix errata for some G3 CPUs Some G3 CPUs can crash in funny way if a store from an FPU register instruction is executed on a register that has never been initialized since power on. This patch fixes it by making sure all FP registers have been properly initialized at kernel boot and when waking from sleep. It also makes the code that decides wether HID0_BTIC and HID0_DPM are allowed on a given CPU smarter (it can actually _clear_ them now if they are not allowed instead of just setting them when they are allowed in case the firmware got them wrong) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:58:40 -07:00
/*
* Initialize the FPU registers. This is needed to work around an errata
* in some 750 cpus where using a not yet initialized FPU register after
* power on reset may hang the CPU
*/
_GLOBAL(__init_fpu_registers)
mfmsr r10
ori r11,r10,MSR_FP
mtmsr r11
isync
addis r9,r3,empty_zero_page@ha
addi r9,r9,empty_zero_page@l
REST_32FPRS(0,r9)
sync
mtmsr r10
isync
blr
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* Definitions for the table use to save CPU states */
#define CS_HID0 0
#define CS_HID1 4
#define CS_HID2 8
#define CS_MSSCR0 12
#define CS_MSSSR0 16
#define CS_ICTRL 20
#define CS_LDSTCR 24
#define CS_LDSTDB 28
#define CS_SIZE 32
.data
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
.balign L1_CACHE_BYTES
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cpu_state_storage:
.space CS_SIZE
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
.balign L1_CACHE_BYTES,0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
.text
/* Called in normal context to backup CPU 0 state. This
* does not include cache settings. This function is also
* called for machine sleep. This does not include the MMU
* setup, BATs, etc... but rather the "special" registers
* like HID0, HID1, MSSCR0, etc...
*/
_GLOBAL(__save_cpu_setup)
/* Some CR fields are volatile, we back it up all */
mfcr r7
/* Get storage ptr */
lis r5,cpu_state_storage@h
ori r5,r5,cpu_state_storage@l
/* Save HID0 (common to all CONFIG_6xx cpus) */
mfspr r3,SPRN_HID0
stw r3,CS_HID0(r5)
/* Now deal with CPU type dependent registers */
mfspr r3,SPRN_PVR
srwi r3,r3,16
cmplwi cr0,r3,0x8000 /* 7450 */
cmplwi cr1,r3,0x000c /* 7400 */
cmplwi cr2,r3,0x800c /* 7410 */
cmplwi cr3,r3,0x8001 /* 7455 */
cmplwi cr4,r3,0x8002 /* 7457 */
cmplwi cr5,r3,0x8003 /* 7447A */
cmplwi cr6,r3,0x7000 /* 750FX */
[PATCH] ppc32: Added cputable entry for 7448 Added cputable entry for 7448 as well adding it to checks for saving and restoring of cpu state. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-03 15:55:55 -07:00
cmplwi cr7,r3,0x8004 /* 7448 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* cr1 is 7400 || 7410 */
cror 4*cr1+eq,4*cr1+eq,4*cr2+eq
/* cr0 is 74xx */
cror 4*cr0+eq,4*cr0+eq,4*cr3+eq
cror 4*cr0+eq,4*cr0+eq,4*cr4+eq
cror 4*cr0+eq,4*cr0+eq,4*cr1+eq
cror 4*cr0+eq,4*cr0+eq,4*cr5+eq
[PATCH] ppc32: Added cputable entry for 7448 Added cputable entry for 7448 as well adding it to checks for saving and restoring of cpu state. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-03 15:55:55 -07:00
cror 4*cr0+eq,4*cr0+eq,4*cr7+eq
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
bne 1f
/* Backup 74xx specific regs */
mfspr r4,SPRN_MSSCR0
stw r4,CS_MSSCR0(r5)
mfspr r4,SPRN_MSSSR0
stw r4,CS_MSSSR0(r5)
beq cr1,1f
/* Backup 745x specific registers */
mfspr r4,SPRN_HID1
stw r4,CS_HID1(r5)
mfspr r4,SPRN_ICTRL
stw r4,CS_ICTRL(r5)
mfspr r4,SPRN_LDSTCR
stw r4,CS_LDSTCR(r5)
mfspr r4,SPRN_LDSTDB
stw r4,CS_LDSTDB(r5)
1:
bne cr6,1f
/* Backup 750FX specific registers */
mfspr r4,SPRN_HID1
stw r4,CS_HID1(r5)
/* If rev 2.x, backup HID2 */
mfspr r3,SPRN_PVR
andi. r3,r3,0xff00
cmpwi cr0,r3,0x0200
bne 1f
mfspr r4,SPRN_HID2
stw r4,CS_HID2(r5)
1:
mtcr r7
blr
/* Called with no MMU context (typically MSR:IR/DR off) to
* restore CPU state as backed up by the previous
* function. This does not include cache setting
*/
_GLOBAL(__restore_cpu_setup)
/* Some CR fields are volatile, we back it up all */
mfcr r7
/* Get storage ptr */
lis r5,(cpu_state_storage-KERNELBASE)@h
ori r5,r5,cpu_state_storage@l
/* Restore HID0 */
lwz r3,CS_HID0(r5)
sync
isync
mtspr SPRN_HID0,r3
sync
isync
/* Now deal with CPU type dependent registers */
mfspr r3,SPRN_PVR
srwi r3,r3,16
cmplwi cr0,r3,0x8000 /* 7450 */
cmplwi cr1,r3,0x000c /* 7400 */
cmplwi cr2,r3,0x800c /* 7410 */
cmplwi cr3,r3,0x8001 /* 7455 */
cmplwi cr4,r3,0x8002 /* 7457 */
cmplwi cr5,r3,0x8003 /* 7447A */
cmplwi cr6,r3,0x7000 /* 750FX */
[PATCH] ppc32: Added cputable entry for 7448 Added cputable entry for 7448 as well adding it to checks for saving and restoring of cpu state. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-03 15:55:55 -07:00
cmplwi cr7,r3,0x8004 /* 7448 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* cr1 is 7400 || 7410 */
cror 4*cr1+eq,4*cr1+eq,4*cr2+eq
/* cr0 is 74xx */
cror 4*cr0+eq,4*cr0+eq,4*cr3+eq
cror 4*cr0+eq,4*cr0+eq,4*cr4+eq
cror 4*cr0+eq,4*cr0+eq,4*cr1+eq
cror 4*cr0+eq,4*cr0+eq,4*cr5+eq
[PATCH] ppc32: Added cputable entry for 7448 Added cputable entry for 7448 as well adding it to checks for saving and restoring of cpu state. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-03 15:55:55 -07:00
cror 4*cr0+eq,4*cr0+eq,4*cr7+eq
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
bne 2f
/* Restore 74xx specific regs */
lwz r4,CS_MSSCR0(r5)
sync
mtspr SPRN_MSSCR0,r4
sync
isync
lwz r4,CS_MSSSR0(r5)
sync
mtspr SPRN_MSSSR0,r4
sync
isync
bne cr2,1f
/* Clear 7410 L2CR2 */
li r4,0
mtspr SPRN_L2CR2,r4
1: beq cr1,2f
/* Restore 745x specific registers */
lwz r4,CS_HID1(r5)
sync
mtspr SPRN_HID1,r4
isync
sync
lwz r4,CS_ICTRL(r5)
sync
mtspr SPRN_ICTRL,r4
isync
sync
lwz r4,CS_LDSTCR(r5)
sync
mtspr SPRN_LDSTCR,r4
isync
sync
lwz r4,CS_LDSTDB(r5)
sync
mtspr SPRN_LDSTDB,r4
isync
sync
2: bne cr6,1f
/* Restore 750FX specific registers
* that is restore HID2 on rev 2.x and PLL config & switch
* to PLL 0 on all
*/
/* If rev 2.x, restore HID2 with low voltage bit cleared */
mfspr r3,SPRN_PVR
andi. r3,r3,0xff00
cmpwi cr0,r3,0x0200
bne 4f
lwz r4,CS_HID2(r5)
rlwinm r4,r4,0,19,17
mtspr SPRN_HID2,r4
sync
4:
lwz r4,CS_HID1(r5)
rlwinm r5,r4,0,16,14
mtspr SPRN_HID1,r5
/* Wait for PLL to stabilize */
mftbl r5
3: mftbl r6
sub r6,r6,r5
cmplwi cr0,r6,10000
ble 3b
/* Setup final PLL */
mtspr SPRN_HID1,r4
1:
mtcr r7
blr
Reference in a new issue Copy permalink