forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
linux-pinenote/arch/arm/common/Kconfig

43 lines
548 B
Text
Raw Normal View History

[ARM] Separate VIC (vectored interrupt controller) support from Versatile Other machines may wish to make use of the VIC support code, so move it to arch/arm/common. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-13 21:30:48 +00:00
config ARM_GIC
ARM: gic: add irq_domain support Convert the gic interrupt controller to use irq domains in preparation for device-tree binding and MULTI_IRQ. This allows for translation between GIC interrupt IDs and Linux irq numbers. The meaning of irq_offset has changed. It now is just the number of skipped GIC interrupt IDs for the controller. It will be 16 for primary GIC and 32 for secondary GICs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-09-28 21:25:31 -05:00
select IRQ_DOMAIN
ARM: GIC: Make MULTI_IRQ_HANDLER mandatory Now that MULTI_IRQ_HANDLER is selected by all the in-tree GIC users, make it mandatory and remove the unused macros. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-09-06 13:27:10 +01:00
select MULTI_IRQ_HANDLER
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
bool
ARM: gic: allow GIC to support non-banked setups The GIC support code is heavily using the fact that hardware implementations are exposing banked registers. Unfortunately, it looks like at least one GIC implementation (EXYNOS) offers both the distributor and the CPU interfaces at different addresses, depending on the CPU. This problem is solved by allowing the distributor and CPU interface addresses to be per-cpu variables for the platforms that require it. The EXYNOS code is updated not to mess with the GIC internals while handling interrupts, and struct gic_chip_data is back to being private. The DT binding for the gic is updated to allow an optional "cpu-offset" value, which is used to compute the various base addresses. Finally, a new config option (GIC_NON_BANKED) is used to control this feature, so the overhead is only present on kernels compiled with support for EXYNOS. Tested on Origen (EXYNOS4) and Panda (OMAP4). Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-11-12 16:09:49 +00:00
config GIC_NON_BANKED
bool
[ARM] Separate VIC (vectored interrupt controller) support from Versatile Other machines may wish to make use of the VIC support code, so move it to arch/arm/common. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-13 21:30:48 +00:00
config ARM_VIC
ARM: vic: device tree binding This adds a device tree binding for the VIC based on the of_irq_init() support. This adds an irqdomain to the vic and always registers all vics in the static vic array rather than for pm only to keep track of the irq domain. struct irq_data::hwirq is used where appropriate rather than runtime masking. v3: - include linux/export.h for THIS_MODULE v2: - use irq_domain_simple_ops - remove stub implementation of vic_of_init for !CONFIG_OF - Make VIC select IRQ_DOMAIN Reviewed-by: Rob Herring <robherring2@gmail.com> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Jamie Iles <jamie@jamieiles.com>
2011-09-27 11:00:46 +01:00
select IRQ_DOMAIN
ARM: VIC: remove non MULTI_IRQ_HANDLER support Now that all platforms are converted to MULTI_IRQ_HANDLER, remove the legacy support. Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Jamie Iles <jamie@jamieiles.com>
2011-11-03 17:32:39 +00:00
select MULTI_IRQ_HANDLER
[ARM] Separate VIC (vectored interrupt controller) support from Versatile Other machines may wish to make use of the VIC support code, so move it to arch/arm/common. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-13 21:30:48 +00:00
bool
[ARM] VIC: Add power management device Add power management support to the VIC by registering each VIC as a system device to get suspend/resume events going. Since the VIC registeration is done early, we need to record the VICs in a static array which is used to add the system devices later once the initcalls are run. This means there is now a configuration value for the number of VICs in the system. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-24 15:30:07 +00:00
config ARM_VIC_NR
int
ARM: 6761/1: Update number of VIC for S5PV210 The S5PV210 SoC have 4 VICs. It requires for suspend and resume. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-24 02:12:00 +01:00
default 4 if ARCH_S5PV210
ARM: S5P6442: Removing ARCH_S5P6442 Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-05-11 16:27:51 +09:00
default 3 if ARCH_S5PC100
[ARM] VIC: Add power management device Add power management support to the VIC by registering each VIC as a system device to get suspend/resume events going. Since the VIC registeration is done early, we need to record the VICs in a static array which is used to add the system devices later once the initcalls are run. This means there is now a configuration value for the number of VICs in the system. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-24 15:30:07 +00:00
default 2
[ARM] Make ARM_VIC_NR depend on ARM_VIC Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-01 18:17:53 +01:00
depends on ARM_VIC
[ARM] VIC: Add power management device Add power management support to the VIC by registering each VIC as a system device to get suspend/resume events going. Since the VIC registeration is done early, we need to record the VICs in a static array which is used to add the system devices later once the initcalls are run. This means there is now a configuration value for the number of VICs in the system. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-24 15:30:07 +00:00
help
The maximum number of VICs available in the system, for
power management.
ARM: ICST: kill duplicate icst code The only difference between ICST307 and ICST525 are the two arrays for calculating the S parameter; the code is now identical. Merge the two files and kill the duplicated code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-16 20:16:10 +00:00
config ICST
[ARM] Add support for ARM GIC Add support for the ARM Generic Interrupt Controller. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-18 21:31:00 +01:00
bool
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
config SA1111
bool
[ARM] 5295/1: make ZONE_DMA optional Most ARM machines don't need a special "DMA" memory zone, and when configured out, the kernel becomes a bit smaller: | text data bss dec hex filename |3826182 102384 111700 4040266 3da64a vmlinux |3823593 101616 111700 4036909 3d992d vmlinux.nodmazone This is because the system now has only one zone total which effect is to optimize away many conditionals in page allocation paths. So let's configure this zone only on machines that need split zones. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 20:14:55 +01:00
select DMABOUNCE if !ARCH_PXA
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
config DMABOUNCE
bool
[ARM] dmabounce requires ZONE_DMA Rather than having everything that needs DMABOUNCE also select ZONE_DMA, arrange for DMABOUNCE to select it instead. This is far more sensible. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-17 14:00:43 +01:00
select ZONE_DMA
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
config SHARP_LOCOMO
bool
config SHARP_PARAM
bool
config SHARP_SCOOP
bool
Reference in a new issue Copy permalink