forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
linux-pinenote/arch/powerpc/sysdev/mv64x60.h

13 lines
273 B
C
Raw Normal View History

[POWERPC] Add interrupt support for Marvell mv64x60 chips There are 3 interrupt groups each with its own status/mask registers. We use a separate struct irq_chip for each interrupt group and handle interrupts in two stages or levels: level 1 selects the appropriate struct irq_chip, and level 2 selects individual interrupts within that irq_chip. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 10:55:24 +10:00
#ifndef __MV64X60_H__
#define __MV64X60_H__
#include <linux/init.h>
extern void __init mv64x60_init_irq(void);
extern unsigned int mv64x60_get_irq(void);
[POWERPC] Add Marvell mv64x60 PCI bridge support This patch adds PCI bridge support for the Marvell mv64x60 chip. We also provide the ability to read/write the mv64x60 hotswap register via sysfs if the hs_reg_valid property is set in the device tree. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 10:57:12 +10:00
extern void __init mv64x60_pci_init(void);
[POWERPC] Add Marvell mv64x60 udbg putc/getc functions Commit 69331af, "Fixes and cleanups for earlyprintk aka boot console", resulted in printk output prior to the initialization of the mpsc console driver not being printed. That commit causes the mpsc's CON_PRINTBUFFER flag to be cleared since udbg should have printed the previous output. I guess we can no longer ignore udbg. :) This patch provides udbg_putc() and udbg_getc() functions for the Marvell mv64x60 chips. These functions are enabled if an mv64x60 port is to be used as the console as determined from the device tree. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-15 05:52:22 +10:00
extern void __init mv64x60_init_early(void);
[POWERPC] Add Marvell mv64x60 PCI bridge support This patch adds PCI bridge support for the Marvell mv64x60 chip. We also provide the ability to read/write the mv64x60 hotswap register via sysfs if the hs_reg_valid property is set in the device tree. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 10:57:12 +10:00
[POWERPC] Add interrupt support for Marvell mv64x60 chips There are 3 interrupt groups each with its own status/mask registers. We use a separate struct irq_chip for each interrupt group and handle interrupts in two stages or levels: level 1 selects the appropriate struct irq_chip, and level 2 selects individual interrupts within that irq_chip. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 10:55:24 +10:00
#endif /* __MV64X60_H__ */
Reference in a new issue Copy permalink