linux-pinenote/drivers/mmc/core/sdio_ops.h

/*
 *  linux/drivers/mmc/sdio_ops.c
 *
 *  Copyright 2006-2007 Pierre Ossman
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or (at
 * your option) any later version.
 */

#ifndef _MMC_SDIO_OPS_H
#define _MMC_SDIO_OPS_H

int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr);
int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
	unsigned addr, u8 in, u8* out);
int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
	unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz);
int sdio_reset(struct mmc_host *host);

#endif
mmc: detect SDIO cards Really basic init sequence for SDIO cards. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> 2007-05-21 20:23:20 +02:00			`/*`
			`* linux/drivers/mmc/sdio_ops.c`
			`*`
			`* Copyright 2006-2007 Pierre Ossman`
			`*`
			`* This program is free software; you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation; either version 2 of the License, or (at`
			`* your option) any later version.`
			`*/`

			`#ifndef _MMC_SDIO_OPS_H`
			`#define _MMC_SDIO_OPS_H`

			`int mmc_send_io_op_cond(struct mmc_host host, u32 ocr, u32 rocr);`
mmc: implement SDIO IO_RW_DIRECT operation Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> 2007-05-22 20:25:21 +02:00			`int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,`
			`unsigned addr, u8 in, u8* out);`
sdio: support IO_RW_EXTENDED Support the multi-byte transfer operation, including handlers for common operations like writel()/readl(). Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> 2007-07-06 13:35:01 +02:00			`int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,`
sdio: extend sdio_readsb() and friends to handle any length of buffer Extend sdio_readsb(), sdio_writesb(), sdio_memcpy_fromio(), and sdio_memcpy_toio() to handle any length of buffer by splitting the transfer into several IO_RW_EXTENDED commands. Typically, a transfer would be split into a single block mode transfer followed by a byte mode transfer for the remainder but we also handle lack of block mode support and the block size being greater than 512 (the maximum byte mode transfer size). host->max_seg_size <= host->max_req_size so there's no need to check both when determining the maximum data size for a single command. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> 2007-08-08 14:24:21 +01:00			`unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz);`
sdio: recognize io card without powercycle SDIO Simplified Specification V2.00 states that it is strongly recommended that the host executes either a power reset or issues a CMD52 (I/O Reset) to re-initialize an I/O only card or the I/O portion of a combo card. Additionally, the CMD52 must be issued first because it cannot be issued after a CMD0. With this patch the Nintendo Wii SDIO-based WLAN card is detected after a system reset, without requiring a complete system powercycle. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 2010-03-10 15:20:37 -08:00			`int sdio_reset(struct mmc_host *host);`
mmc: detect SDIO cards Really basic init sequence for SDIO cards. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> 2007-05-21 20:23:20 +02:00
			`#endif`