forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
linux-pinenote/include/linux/mfd/wm831x/core.h

317 lines
14 KiB
C
Raw Normal View History

mfd: Initial core support for WM831x series devices The WM831x series of devices are register compatible processor power management subsystems, providing regulator and power path management facilities along with other services like watchdog, RTC and touch panel controllers. This patch adds very basic support, providing basic single register I2C access, handling of the security key and registration of the devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-07-27 14:45:52 +01:00
/*
* include/linux/mfd/wm831x/core.h -- Core interface for WM831x
*
* Copyright 2009 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef __MFD_WM831X_CORE_H__
#define __MFD_WM831X_CORE_H__
mfd: Use completion interrupt for WM831x AUXADC Use the completion interrupt generated by the device rather than polling for conversions to complete. As a backup we still check the status of the AUXADC if we don't get a completion, mostly for systems that don't have the WM831x interrupt infrastructure hooked up. Also reduce the timeout for completion of conversions to 5ms from the previous 10ms, the lower timeout should be sufficient. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-02-23 11:08:06 +00:00
#include <linux/completion.h>
mfd: Add WM831x interrupt support The WM831x includes an interrupt controller managing interrupts for the various functions on the chip. This patch adds support for the core interrupt block on the device. Ideally this would be supported by genirq, particularly for the GPIOs, but currently genirq is unable to cope with controllers on interrupt driven buses so we cut'n'paste the generic interface. Once genirq is able to cope chips like this it should be a case of filing the prefixes off the code and redoing wm831x-irq.c to move over. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-07-27 14:45:53 +01:00
#include <linux/interrupt.h>
mfd: Initial core support for WM831x series devices The WM831x series of devices are register compatible processor power management subsystems, providing regulator and power path management facilities along with other services like watchdog, RTC and touch panel controllers. This patch adds very basic support, providing basic single register I2C access, handling of the security key and registration of the devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-07-27 14:45:52 +01:00
/*
* Register values.
*/
#define WM831X_RESET_ID 0x00
#define WM831X_REVISION 0x01
#define WM831X_PARENT_ID 0x4000
#define WM831X_SYSVDD_CONTROL 0x4001
#define WM831X_THERMAL_MONITORING 0x4002
#define WM831X_POWER_STATE 0x4003
#define WM831X_WATCHDOG 0x4004
#define WM831X_ON_PIN_CONTROL 0x4005
#define WM831X_RESET_CONTROL 0x4006
#define WM831X_CONTROL_INTERFACE 0x4007
#define WM831X_SECURITY_KEY 0x4008
#define WM831X_SOFTWARE_SCRATCH 0x4009
#define WM831X_OTP_CONTROL 0x400A
#define WM831X_GPIO_LEVEL 0x400C
#define WM831X_SYSTEM_STATUS 0x400D
#define WM831X_ON_SOURCE 0x400E
#define WM831X_OFF_SOURCE 0x400F
#define WM831X_SYSTEM_INTERRUPTS 0x4010
#define WM831X_INTERRUPT_STATUS_1 0x4011
#define WM831X_INTERRUPT_STATUS_2 0x4012
#define WM831X_INTERRUPT_STATUS_3 0x4013
#define WM831X_INTERRUPT_STATUS_4 0x4014
#define WM831X_INTERRUPT_STATUS_5 0x4015
#define WM831X_IRQ_CONFIG 0x4017
#define WM831X_SYSTEM_INTERRUPTS_MASK 0x4018
#define WM831X_INTERRUPT_STATUS_1_MASK 0x4019
#define WM831X_INTERRUPT_STATUS_2_MASK 0x401A
#define WM831X_INTERRUPT_STATUS_3_MASK 0x401B
#define WM831X_INTERRUPT_STATUS_4_MASK 0x401C
#define WM831X_INTERRUPT_STATUS_5_MASK 0x401D
#define WM831X_RTC_WRITE_COUNTER 0x4020
#define WM831X_RTC_TIME_1 0x4021
#define WM831X_RTC_TIME_2 0x4022
#define WM831X_RTC_ALARM_1 0x4023
#define WM831X_RTC_ALARM_2 0x4024
#define WM831X_RTC_CONTROL 0x4025
#define WM831X_RTC_TRIM 0x4026
#define WM831X_TOUCH_CONTROL_1 0x4028
#define WM831X_TOUCH_CONTROL_2 0x4029
#define WM831X_TOUCH_DATA_X 0x402A
#define WM831X_TOUCH_DATA_Y 0x402B
#define WM831X_TOUCH_DATA_Z 0x402C
#define WM831X_AUXADC_DATA 0x402D
#define WM831X_AUXADC_CONTROL 0x402E
#define WM831X_AUXADC_SOURCE 0x402F
#define WM831X_COMPARATOR_CONTROL 0x4030
#define WM831X_COMPARATOR_1 0x4031
#define WM831X_COMPARATOR_2 0x4032
#define WM831X_COMPARATOR_3 0x4033
#define WM831X_COMPARATOR_4 0x4034
#define WM831X_GPIO1_CONTROL 0x4038
#define WM831X_GPIO2_CONTROL 0x4039
#define WM831X_GPIO3_CONTROL 0x403A
#define WM831X_GPIO4_CONTROL 0x403B
#define WM831X_GPIO5_CONTROL 0x403C
#define WM831X_GPIO6_CONTROL 0x403D
#define WM831X_GPIO7_CONTROL 0x403E
#define WM831X_GPIO8_CONTROL 0x403F
#define WM831X_GPIO9_CONTROL 0x4040
#define WM831X_GPIO10_CONTROL 0x4041
#define WM831X_GPIO11_CONTROL 0x4042
#define WM831X_GPIO12_CONTROL 0x4043
#define WM831X_GPIO13_CONTROL 0x4044
#define WM831X_GPIO14_CONTROL 0x4045
#define WM831X_GPIO15_CONTROL 0x4046
#define WM831X_GPIO16_CONTROL 0x4047
#define WM831X_CHARGER_CONTROL_1 0x4048
#define WM831X_CHARGER_CONTROL_2 0x4049
#define WM831X_CHARGER_STATUS 0x404A
#define WM831X_BACKUP_CHARGER_CONTROL 0x404B
#define WM831X_STATUS_LED_1 0x404C
#define WM831X_STATUS_LED_2 0x404D
#define WM831X_CURRENT_SINK_1 0x404E
#define WM831X_CURRENT_SINK_2 0x404F
#define WM831X_DCDC_ENABLE 0x4050
#define WM831X_LDO_ENABLE 0x4051
#define WM831X_DCDC_STATUS 0x4052
#define WM831X_LDO_STATUS 0x4053
#define WM831X_DCDC_UV_STATUS 0x4054
#define WM831X_LDO_UV_STATUS 0x4055
#define WM831X_DC1_CONTROL_1 0x4056
#define WM831X_DC1_CONTROL_2 0x4057
#define WM831X_DC1_ON_CONFIG 0x4058
#define WM831X_DC1_SLEEP_CONTROL 0x4059
#define WM831X_DC1_DVS_CONTROL 0x405A
#define WM831X_DC2_CONTROL_1 0x405B
#define WM831X_DC2_CONTROL_2 0x405C
#define WM831X_DC2_ON_CONFIG 0x405D
#define WM831X_DC2_SLEEP_CONTROL 0x405E
#define WM831X_DC2_DVS_CONTROL 0x405F
#define WM831X_DC3_CONTROL_1 0x4060
#define WM831X_DC3_CONTROL_2 0x4061
#define WM831X_DC3_ON_CONFIG 0x4062
#define WM831X_DC3_SLEEP_CONTROL 0x4063
#define WM831X_DC4_CONTROL 0x4064
#define WM831X_DC4_SLEEP_CONTROL 0x4065
mfd: Add support for WM8320 PMICs The WM8320 is an integrated power management subsystem providing voltage regulators, RTC, watchdog and other functionality. The WM8320 is derived from the WM831x and therefore shares most of the driver code with the WM831x. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-10-01 15:41:07 +01:00
#define WM832X_DC4_SLEEP_CONTROL 0x4067
mfd: Initial core support for WM831x series devices The WM831x series of devices are register compatible processor power management subsystems, providing regulator and power path management facilities along with other services like watchdog, RTC and touch panel controllers. This patch adds very basic support, providing basic single register I2C access, handling of the security key and registration of the devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-07-27 14:45:52 +01:00
#define WM831X_EPE1_CONTROL 0x4066
#define WM831X_EPE2_CONTROL 0x4067
#define WM831X_LDO1_CONTROL 0x4068
#define WM831X_LDO1_ON_CONTROL 0x4069
#define WM831X_LDO1_SLEEP_CONTROL 0x406A
#define WM831X_LDO2_CONTROL 0x406B
#define WM831X_LDO2_ON_CONTROL 0x406C
#define WM831X_LDO2_SLEEP_CONTROL 0x406D
#define WM831X_LDO3_CONTROL 0x406E
#define WM831X_LDO3_ON_CONTROL 0x406F
#define WM831X_LDO3_SLEEP_CONTROL 0x4070
#define WM831X_LDO4_CONTROL 0x4071
#define WM831X_LDO4_ON_CONTROL 0x4072
#define WM831X_LDO4_SLEEP_CONTROL 0x4073
#define WM831X_LDO5_CONTROL 0x4074
#define WM831X_LDO5_ON_CONTROL 0x4075
#define WM831X_LDO5_SLEEP_CONTROL 0x4076
#define WM831X_LDO6_CONTROL 0x4077
#define WM831X_LDO6_ON_CONTROL 0x4078
#define WM831X_LDO6_SLEEP_CONTROL 0x4079
#define WM831X_LDO7_CONTROL 0x407A
#define WM831X_LDO7_ON_CONTROL 0x407B
#define WM831X_LDO7_SLEEP_CONTROL 0x407C
#define WM831X_LDO8_CONTROL 0x407D
#define WM831X_LDO8_ON_CONTROL 0x407E
#define WM831X_LDO8_SLEEP_CONTROL 0x407F
#define WM831X_LDO9_CONTROL 0x4080
#define WM831X_LDO9_ON_CONTROL 0x4081
#define WM831X_LDO9_SLEEP_CONTROL 0x4082
#define WM831X_LDO10_CONTROL 0x4083
#define WM831X_LDO10_ON_CONTROL 0x4084
#define WM831X_LDO10_SLEEP_CONTROL 0x4085
#define WM831X_LDO11_ON_CONTROL 0x4087
#define WM831X_LDO11_SLEEP_CONTROL 0x4088
#define WM831X_POWER_GOOD_SOURCE_1 0x408E
#define WM831X_POWER_GOOD_SOURCE_2 0x408F
#define WM831X_CLOCK_CONTROL_1 0x4090
#define WM831X_CLOCK_CONTROL_2 0x4091
#define WM831X_FLL_CONTROL_1 0x4092
#define WM831X_FLL_CONTROL_2 0x4093
#define WM831X_FLL_CONTROL_3 0x4094
#define WM831X_FLL_CONTROL_4 0x4095
#define WM831X_FLL_CONTROL_5 0x4096
#define WM831X_UNIQUE_ID_1 0x7800
#define WM831X_UNIQUE_ID_2 0x7801
#define WM831X_UNIQUE_ID_3 0x7802
#define WM831X_UNIQUE_ID_4 0x7803
#define WM831X_UNIQUE_ID_5 0x7804
#define WM831X_UNIQUE_ID_6 0x7805
#define WM831X_UNIQUE_ID_7 0x7806
#define WM831X_UNIQUE_ID_8 0x7807
#define WM831X_FACTORY_OTP_ID 0x7808
#define WM831X_FACTORY_OTP_1 0x7809
#define WM831X_FACTORY_OTP_2 0x780A
#define WM831X_FACTORY_OTP_3 0x780B
#define WM831X_FACTORY_OTP_4 0x780C
#define WM831X_FACTORY_OTP_5 0x780D
#define WM831X_CUSTOMER_OTP_ID 0x7810
#define WM831X_DC1_OTP_CONTROL 0x7811
#define WM831X_DC2_OTP_CONTROL 0x7812
#define WM831X_DC3_OTP_CONTROL 0x7813
#define WM831X_LDO1_2_OTP_CONTROL 0x7814
#define WM831X_LDO3_4_OTP_CONTROL 0x7815
#define WM831X_LDO5_6_OTP_CONTROL 0x7816
#define WM831X_LDO7_8_OTP_CONTROL 0x7817
#define WM831X_LDO9_10_OTP_CONTROL 0x7818
#define WM831X_LDO11_EPE_CONTROL 0x7819
#define WM831X_GPIO1_OTP_CONTROL 0x781A
#define WM831X_GPIO2_OTP_CONTROL 0x781B
#define WM831X_GPIO3_OTP_CONTROL 0x781C
#define WM831X_GPIO4_OTP_CONTROL 0x781D
#define WM831X_GPIO5_OTP_CONTROL 0x781E
#define WM831X_GPIO6_OTP_CONTROL 0x781F
#define WM831X_DBE_CHECK_DATA 0x7827
/*
* R0 (0x00) - Reset ID
*/
#define WM831X_CHIP_ID_MASK 0xFFFF /* CHIP_ID - [15:0] */
#define WM831X_CHIP_ID_SHIFT 0 /* CHIP_ID - [15:0] */
#define WM831X_CHIP_ID_WIDTH 16 /* CHIP_ID - [15:0] */
/*
* R1 (0x01) - Revision
*/
#define WM831X_PARENT_REV_MASK 0xFF00 /* PARENT_REV - [15:8] */
#define WM831X_PARENT_REV_SHIFT 8 /* PARENT_REV - [15:8] */
#define WM831X_PARENT_REV_WIDTH 8 /* PARENT_REV - [15:8] */
#define WM831X_CHILD_REV_MASK 0x00FF /* CHILD_REV - [7:0] */
#define WM831X_CHILD_REV_SHIFT 0 /* CHILD_REV - [7:0] */
#define WM831X_CHILD_REV_WIDTH 8 /* CHILD_REV - [7:0] */
/*
* R16384 (0x4000) - Parent ID
*/
#define WM831X_PARENT_ID_MASK 0xFFFF /* PARENT_ID - [15:0] */
#define WM831X_PARENT_ID_SHIFT 0 /* PARENT_ID - [15:0] */
#define WM831X_PARENT_ID_WIDTH 16 /* PARENT_ID - [15:0] */
input: Add support for the WM831x ON pin The WM831x series of PMICs support control of initial power on through the ON pin on the device with soft control of the pin at other times. Represent this to userspace as KEY_POWER. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-15 12:07:12 +02:00
/*
* R16389 (0x4005) - ON Pin Control
*/
#define WM831X_ON_PIN_SECACT_MASK 0x0300 /* ON_PIN_SECACT - [9:8] */
#define WM831X_ON_PIN_SECACT_SHIFT 8 /* ON_PIN_SECACT - [9:8] */
#define WM831X_ON_PIN_SECACT_WIDTH 2 /* ON_PIN_SECACT - [9:8] */
#define WM831X_ON_PIN_PRIMACT_MASK 0x0030 /* ON_PIN_PRIMACT - [5:4] */
#define WM831X_ON_PIN_PRIMACT_SHIFT 4 /* ON_PIN_PRIMACT - [5:4] */
#define WM831X_ON_PIN_PRIMACT_WIDTH 2 /* ON_PIN_PRIMACT - [5:4] */
#define WM831X_ON_PIN_STS 0x0008 /* ON_PIN_STS */
#define WM831X_ON_PIN_STS_MASK 0x0008 /* ON_PIN_STS */
#define WM831X_ON_PIN_STS_SHIFT 3 /* ON_PIN_STS */
#define WM831X_ON_PIN_STS_WIDTH 1 /* ON_PIN_STS */
#define WM831X_ON_PIN_TO_MASK 0x0003 /* ON_PIN_TO - [1:0] */
#define WM831X_ON_PIN_TO_SHIFT 0 /* ON_PIN_TO - [1:0] */
#define WM831X_ON_PIN_TO_WIDTH 2 /* ON_PIN_TO - [1:0] */
struct regulator_dev;
mfd: Move WM831x to generic IRQ Replace the wm831x-local IRQ infrastructure with genirq, allowing access to the diagnostic infrastructure of genirq and allowing us to implement interrupt support for the GPIOs. The switchover is done within the wm831x specific IRQ API, further patches will convert the individual drivers to use genirq directly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-11-11 16:10:22 +00:00
#define WM831X_NUM_IRQ_REGS 5
mfd: Initial core support for WM831x series devices The WM831x series of devices are register compatible processor power management subsystems, providing regulator and power path management facilities along with other services like watchdog, RTC and touch panel controllers. This patch adds very basic support, providing basic single register I2C access, handling of the security key and registration of the devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-07-27 14:45:52 +01:00
struct wm831x {
struct mutex io_lock;
struct device *dev;
int (*read_dev)(struct wm831x *wm831x, unsigned short reg,
int bytes, void *dest);
int (*write_dev)(struct wm831x *wm831x, unsigned short reg,
int bytes, void *src);
void *control_data;
mfd: Add WM831x interrupt support The WM831x includes an interrupt controller managing interrupts for the various functions on the chip. This patch adds support for the core interrupt block on the device. Ideally this would be supported by genirq, particularly for the GPIOs, but currently genirq is unable to cope with controllers on interrupt driven buses so we cut'n'paste the generic interface. Once genirq is able to cope chips like this it should be a case of filing the prefixes off the code and redoing wm831x-irq.c to move over. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-07-27 14:45:53 +01:00
int irq; /* Our chip IRQ */
struct mutex irq_lock;
unsigned int irq_base;
mfd: Move WM831x to generic IRQ Replace the wm831x-local IRQ infrastructure with genirq, allowing access to the diagnostic infrastructure of genirq and allowing us to implement interrupt support for the GPIOs. The switchover is done within the wm831x specific IRQ API, further patches will convert the individual drivers to use genirq directly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-11-11 16:10:22 +00:00
int irq_masks_cur[WM831X_NUM_IRQ_REGS]; /* Currently active value */
int irq_masks_cache[WM831X_NUM_IRQ_REGS]; /* Cached hardware value */
mfd: Add WM831x interrupt support The WM831x includes an interrupt controller managing interrupts for the various functions on the chip. This patch adds support for the core interrupt block on the device. Ideally this would be supported by genirq, particularly for the GPIOs, but currently genirq is unable to cope with controllers on interrupt driven buses so we cut'n'paste the generic interface. Once genirq is able to cope chips like this it should be a case of filing the prefixes off the code and redoing wm831x-irq.c to move over. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-07-27 14:45:53 +01:00
mfd: Add WM831x revision B support Revision B of the WM831x devices changes the sense of the tristate bit for GPIO configuration, inverting it to become an enable instead. Take account of this in the gpiolib driver. A current sink regulation status bit has also been added in revision B, add a flag indicating if it's present but don't use it yet. This revision also adds an interrupt on key up for the ON pin event which the existing code is able to take advantage of. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-02-17 18:45:25 +00:00
/* Chip revision based flags */
unsigned has_gpio_ena:1; /* Has GPIO enable bit */
unsigned has_cs_sts:1; /* Has current sink status bit */
gpiolib: Make WM831x GPIO count dynamic This supports future devices with fewer GPIOs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-10-01 15:41:05 +01:00
int num_gpio;
mfd: Add WM831x AUXADC support The WM831x contains an auxiliary ADC with a number of switchable inputs which is used to monitor some of the voltages and temperatures in the system and has some external inputs which can be used for machine specific purposes. Provide an API allowing drivers to read values from the ADC. An internal reference voltage is provided to allow callibration of the ADC. This is used to calibrate the device at startup. The hardware also supports continuous readings and digital comparators. These are not yet supported by the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-07-27 14:45:54 +01:00
struct mutex auxadc_lock;
mfd: Use completion interrupt for WM831x AUXADC Use the completion interrupt generated by the device rather than polling for conversions to complete. As a backup we still check the status of the AUXADC if we don't get a completion, mostly for systems that don't have the WM831x interrupt infrastructure hooked up. Also reduce the timeout for completion of conversions to 5ms from the previous 10ms, the lower timeout should be sufficient. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-02-23 11:08:06 +00:00
struct completion auxadc_done;
mfd: Add WM831x AUXADC support The WM831x contains an auxiliary ADC with a number of switchable inputs which is used to monitor some of the voltages and temperatures in the system and has some external inputs which can be used for machine specific purposes. Provide an API allowing drivers to read values from the ADC. An internal reference voltage is provided to allow callibration of the ADC. This is used to calibrate the device at startup. The hardware also supports continuous readings and digital comparators. These are not yet supported by the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-07-27 14:45:54 +01:00
mfd: Initial core support for WM831x series devices The WM831x series of devices are register compatible processor power management subsystems, providing regulator and power path management facilities along with other services like watchdog, RTC and touch panel controllers. This patch adds very basic support, providing basic single register I2C access, handling of the security key and registration of the devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-07-27 14:45:52 +01:00
/* The WM831x has a security key blocking access to certain
* registers. The mutex is taken by the accessors for locking
* and unlocking the security key, locked is used to fail
* writes if the lock is held.
*/
struct mutex key_lock;
unsigned int locked:1;
};
/* Device I/O API */
int wm831x_reg_read(struct wm831x *wm831x, unsigned short reg);
int wm831x_reg_write(struct wm831x *wm831x, unsigned short reg,
unsigned short val);
void wm831x_reg_lock(struct wm831x *wm831x);
int wm831x_reg_unlock(struct wm831x *wm831x);
int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg,
unsigned short mask, unsigned short val);
int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg,
int count, u16 *buf);
mfd: Add WM831x interrupt support The WM831x includes an interrupt controller managing interrupts for the various functions on the chip. This patch adds support for the core interrupt block on the device. Ideally this would be supported by genirq, particularly for the GPIOs, but currently genirq is unable to cope with controllers on interrupt driven buses so we cut'n'paste the generic interface. Once genirq is able to cope chips like this it should be a case of filing the prefixes off the code and redoing wm831x-irq.c to move over. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-07-27 14:45:53 +01:00
int wm831x_irq_init(struct wm831x *wm831x, int irq);
void wm831x_irq_exit(struct wm831x *wm831x);
mfd: Move WM831x to generic IRQ Replace the wm831x-local IRQ infrastructure with genirq, allowing access to the diagnostic infrastructure of genirq and allowing us to implement interrupt support for the GPIOs. The switchover is done within the wm831x specific IRQ API, further patches will convert the individual drivers to use genirq directly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-11-11 16:10:22 +00:00
static inline int __must_check wm831x_request_irq(struct wm831x *wm831x,
unsigned int irq,
irq_handler_t handler,
unsigned long flags,
const char *name,
void *dev)
{
return request_threaded_irq(irq, NULL, handler, flags, name, dev);
}
static inline void wm831x_free_irq(struct wm831x *wm831x,
unsigned int irq, void *dev)
{
free_irq(irq, dev);
}
static inline void wm831x_disable_irq(struct wm831x *wm831x, int irq)
{
disable_irq(irq);
}
static inline void wm831x_enable_irq(struct wm831x *wm831x, int irq)
{
enable_irq(irq);
}
mfd: Add WM831x interrupt support The WM831x includes an interrupt controller managing interrupts for the various functions on the chip. This patch adds support for the core interrupt block on the device. Ideally this would be supported by genirq, particularly for the GPIOs, but currently genirq is unable to cope with controllers on interrupt driven buses so we cut'n'paste the generic interface. Once genirq is able to cope chips like this it should be a case of filing the prefixes off the code and redoing wm831x-irq.c to move over. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-07-27 14:45:53 +01:00
mfd: Initial core support for WM831x series devices The WM831x series of devices are register compatible processor power management subsystems, providing regulator and power path management facilities along with other services like watchdog, RTC and touch panel controllers. This patch adds very basic support, providing basic single register I2C access, handling of the security key and registration of the devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-07-27 14:45:52 +01:00
#endif
Reference in a new issue Copy permalink