forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
linux-pinenote/net/bluetooth/hci_event.c

1538 lines
34 KiB
C
Raw Normal View History

[NET] BLUETOOTH: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 23:24:33 +09:00
/*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
BlueZ - Bluetooth protocol stack for Linux
Copyright (C) 2000-2001 Qualcomm Incorporated
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License version 2 as
published by the Free Software Foundation;
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
[NET] BLUETOOTH: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 23:24:33 +09:00
CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
[NET] BLUETOOTH: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 23:24:33 +09:00
ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
SOFTWARE IS DISCLAIMED.
*/
/* Bluetooth HCI event handling. */
#include <linux/module.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/fcntl.h>
#include <linux/init.h>
#include <linux/skbuff.h>
#include <linux/interrupt.h>
#include <linux/notifier.h>
#include <net/sock.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/unaligned.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#ifndef CONFIG_BT_HCI_CORE_DEBUG
#undef BT_DBG
#define BT_DBG(D...)
#endif
/* Handle HCI Event packets */
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static void hci_cc_inquiry_cancel(struct hci_dev *hdev, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
__u8 status = *((__u8 *) skb->data);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s status 0x%x", hdev->name, status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (status)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
clear_bit(HCI_INQUIRY, &hdev->flags);
[Bluetooth] Handling pending connect attempts after inquiry After an inquiry completed or got canceled the Bluetooth core should check for any pending connect attempts. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-11-18 22:14:22 +01:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_req_complete(hdev, status);
hci_conn_check_pending(hdev);
}
[Bluetooth] Handling pending connect attempts after inquiry After an inquiry completed or got canceled the Bluetooth core should check for any pending connect attempts. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-11-18 22:14:22 +01:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static void hci_cc_exit_periodic_inq(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
[Bluetooth] Handling pending connect attempts after inquiry After an inquiry completed or got canceled the Bluetooth core should check for any pending connect attempts. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-11-18 22:14:22 +01:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s status 0x%x", hdev->name, status);
[Bluetooth] Handling pending connect attempts after inquiry After an inquiry completed or got canceled the Bluetooth core should check for any pending connect attempts. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-11-18 22:14:22 +01:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (status)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
clear_bit(HCI_INQUIRY, &hdev->flags);
hci_conn_check_pending(hdev);
}
static void hci_cc_remote_name_req_cancel(struct hci_dev *hdev, struct sk_buff *skb)
{
BT_DBG("%s", hdev->name);
}
static void hci_cc_role_discovery(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_role_discovery *rp = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status 0x%x", hdev->name, rp->status);
if (rp->status)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(rp->handle));
if (conn) {
if (rp->role)
conn->link_mode &= ~HCI_LM_MASTER;
else
conn->link_mode |= HCI_LM_MASTER;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_dev_unlock(hdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static void hci_cc_write_link_policy(struct hci_dev *hdev, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
struct hci_rp_write_link_policy *rp = (void *) skb->data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
struct hci_conn *conn;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
void *sent;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s status 0x%x", hdev->name, rp->status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (rp->status)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_LINK_POLICY);
if (!sent)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_dev_lock(hdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(rp->handle));
if (conn) {
__le16 policy = get_unaligned((__le16 *) (sent + 2));
conn->link_policy = __le16_to_cpu(policy);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_dev_unlock(hdev);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static void hci_cc_reset(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s status 0x%x", hdev->name, status);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_req_complete(hdev, status);
}
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static void hci_cc_write_local_name(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
void *sent;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s status 0x%x", hdev->name, status);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_LOCAL_NAME);
if (!sent)
return;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (!status)
memcpy(hdev->dev_name, sent, 248);
}
static void hci_cc_read_local_name(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_local_name *rp = (void *) skb->data;
BT_DBG("%s status 0x%x", hdev->name, rp->status);
if (rp->status)
return;
memcpy(hdev->dev_name, rp->name, 248);
}
static void hci_cc_write_auth_enable(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
void *sent;
BT_DBG("%s status 0x%x", hdev->name, status);
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_AUTH_ENABLE);
if (!sent)
return;
if (!status) {
__u8 param = *((__u8 *) sent);
if (param == AUTH_ENABLED)
set_bit(HCI_AUTH, &hdev->flags);
else
clear_bit(HCI_AUTH, &hdev->flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_req_complete(hdev, status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static void hci_cc_write_encrypt_mode(struct hci_dev *hdev, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
__u8 status = *((__u8 *) skb->data);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
void *sent;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s status 0x%x", hdev->name, status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_ENCRYPT_MODE);
if (!sent)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (!status) {
__u8 param = *((__u8 *) sent);
if (param)
set_bit(HCI_ENCRYPT, &hdev->flags);
else
clear_bit(HCI_ENCRYPT, &hdev->flags);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_req_complete(hdev, status);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static void hci_cc_write_scan_enable(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
void *sent;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s status 0x%x", hdev->name, status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_SCAN_ENABLE);
if (!sent)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (!status) {
__u8 param = *((__u8 *) sent);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
clear_bit(HCI_PSCAN, &hdev->flags);
clear_bit(HCI_ISCAN, &hdev->flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (param & SCAN_INQUIRY)
set_bit(HCI_ISCAN, &hdev->flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (param & SCAN_PAGE)
set_bit(HCI_PSCAN, &hdev->flags);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_req_complete(hdev, status);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static void hci_cc_read_class_of_dev(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_class_of_dev *rp = (void *) skb->data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s status 0x%x", hdev->name, rp->status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (rp->status)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
memcpy(hdev->dev_class, rp->dev_class, 3);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s class 0x%.2x%.2x%.2x", hdev->name,
hdev->dev_class[2], hdev->dev_class[1], hdev->dev_class[0]);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static void hci_cc_write_class_of_dev(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
void *sent;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s status 0x%x", hdev->name, status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_CLASS_OF_DEV);
if (!sent)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (!status)
memcpy(hdev->dev_class, sent, 3);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static void hci_cc_read_voice_setting(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_voice_setting *rp = (void *) skb->data;
__u16 setting;
BT_DBG("%s status 0x%x", hdev->name, rp->status);
if (rp->status)
return;
setting = __le16_to_cpu(rp->voice_setting);
if (hdev->voice_setting == setting )
return;
hdev->voice_setting = setting;
BT_DBG("%s voice setting 0x%04x", hdev->name, setting);
if (hdev->notify) {
tasklet_disable(&hdev->tx_task);
hdev->notify(hdev, HCI_NOTIFY_VOICE_SETTING);
tasklet_enable(&hdev->tx_task);
}
}
static void hci_cc_write_voice_setting(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
void *sent;
BT_DBG("%s status 0x%x", hdev->name, status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_VOICE_SETTING);
if (!sent)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (!status) {
__u16 setting = __le16_to_cpu(get_unaligned((__le16 *) sent));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (hdev->voice_setting != setting) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
hdev->voice_setting = setting;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s voice setting 0x%04x", hdev->name, setting);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (hdev->notify) {
tasklet_disable(&hdev->tx_task);
hdev->notify(hdev, HCI_NOTIFY_VOICE_SETTING);
tasklet_enable(&hdev->tx_task);
}
}
}
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static void hci_cc_host_buffer_size(struct hci_dev *hdev, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
__u8 status = *((__u8 *) skb->data);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s status 0x%x", hdev->name, status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_req_complete(hdev, status);
}
[Bluetooth] Read local version information on device init The local version information are needed to identify certain feature sets of devices. They must be read on device init and stored for later use. It is also possible to access them through the device model. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-23 09:57:20 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static void hci_cc_read_local_version(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_local_version *rp = (void *) skb->data;
[Bluetooth] Read local version information on device init The local version information are needed to identify certain feature sets of devices. They must be read on device init and stored for later use. It is also possible to access them through the device model. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-23 09:57:20 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s status 0x%x", hdev->name, rp->status);
[Bluetooth] Read local version information on device init The local version information are needed to identify certain feature sets of devices. They must be read on device init and stored for later use. It is also possible to access them through the device model. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-23 09:57:20 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (rp->status)
return;
[Bluetooth] Read local version information on device init The local version information are needed to identify certain feature sets of devices. They must be read on device init and stored for later use. It is also possible to access them through the device model. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-23 09:57:20 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hdev->hci_ver = rp->hci_ver;
hdev->hci_rev = btohs(rp->hci_rev);
hdev->manufacturer = btohs(rp->manufacturer);
[Bluetooth] Read local version information on device init The local version information are needed to identify certain feature sets of devices. They must be read on device init and stored for later use. It is also possible to access them through the device model. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-23 09:57:20 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s manufacturer %d hci ver %d:%d", hdev->name,
hdev->manufacturer,
hdev->hci_ver, hdev->hci_rev);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static void hci_cc_read_local_commands(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_local_commands *rp = (void *) skb->data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s status 0x%x", hdev->name, rp->status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (rp->status)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
memcpy(hdev->commands, rp->commands, sizeof(hdev->commands));
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static void hci_cc_read_local_features(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_local_features *rp = (void *) skb->data;
[Bluetooth] Add basics to better support and handle eSCO links To better support and handle eSCO links in the future a bunch of constants needs to be added and some basic routines need to be updated. This is the initial step. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-07-11 09:51:55 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s status 0x%x", hdev->name, rp->status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (rp->status)
return;
[Bluetooth] Add basics to better support and handle eSCO links To better support and handle eSCO links in the future a bunch of constants needs to be added and some basic routines need to be updated. This is the initial step. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-07-11 09:51:55 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
memcpy(hdev->features, rp->features, 8);
[Bluetooth] Add basics to better support and handle eSCO links To better support and handle eSCO links in the future a bunch of constants needs to be added and some basic routines need to be updated. This is the initial step. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-07-11 09:51:55 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
/* Adjust default settings according to features
* supported by device. */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (hdev->features[0] & LMP_3SLOT)
hdev->pkt_type |= (HCI_DM3 | HCI_DH3);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (hdev->features[0] & LMP_5SLOT)
hdev->pkt_type |= (HCI_DM5 | HCI_DH5);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (hdev->features[1] & LMP_HV2) {
hdev->pkt_type |= (HCI_HV2);
hdev->esco_type |= (ESCO_HV2);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (hdev->features[1] & LMP_HV3) {
hdev->pkt_type |= (HCI_HV3);
hdev->esco_type |= (ESCO_HV3);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (hdev->features[3] & LMP_ESCO)
hdev->esco_type |= (ESCO_EV3);
[Bluetooth] Correct SCO buffer size on request This patch introduces a quirk that allows the drivers to tell the host to correct the SCO buffer size values. Signed-off-by: Olivier Galibert <galibert@pobox.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:29 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (hdev->features[4] & LMP_EV4)
hdev->esco_type |= (ESCO_EV4);
[Bluetooth] Correct SCO buffer size on request This patch introduces a quirk that allows the drivers to tell the host to correct the SCO buffer size values. Signed-off-by: Olivier Galibert <galibert@pobox.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:29 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (hdev->features[4] & LMP_EV5)
hdev->esco_type |= (ESCO_EV5);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s features 0x%.2x%.2x%.2x%.2x%.2x%.2x%.2x%.2x", hdev->name,
hdev->features[0], hdev->features[1],
hdev->features[2], hdev->features[3],
hdev->features[4], hdev->features[5],
hdev->features[6], hdev->features[7]);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static void hci_cc_read_buffer_size(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_buffer_size *rp = (void *) skb->data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s status 0x%x", hdev->name, rp->status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (rp->status)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hdev->acl_mtu = __le16_to_cpu(rp->acl_mtu);
hdev->sco_mtu = rp->sco_mtu;
hdev->acl_pkts = __le16_to_cpu(rp->acl_max_pkt);
hdev->sco_pkts = __le16_to_cpu(rp->sco_max_pkt);
if (test_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks)) {
hdev->sco_mtu = 64;
hdev->sco_pkts = 8;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hdev->acl_cnt = hdev->acl_pkts;
hdev->sco_cnt = hdev->sco_pkts;
BT_DBG("%s acl mtu %d:%d sco mtu %d:%d", hdev->name,
hdev->acl_mtu, hdev->acl_pkts,
hdev->sco_mtu, hdev->sco_pkts);
}
static void hci_cc_read_bd_addr(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_bd_addr *rp = (void *) skb->data;
BT_DBG("%s status 0x%x", hdev->name, rp->status);
if (!rp->status)
bacpy(&hdev->bdaddr, &rp->bdaddr);
hci_req_complete(hdev, rp->status);
}
static inline void hci_cs_inquiry(struct hci_dev *hdev, __u8 status)
{
BT_DBG("%s status 0x%x", hdev->name, status);
if (status) {
hci_req_complete(hdev, status);
hci_conn_check_pending(hdev);
} else
set_bit(HCI_INQUIRY, &hdev->flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
static inline void hci_cs_create_conn(struct hci_dev *hdev, __u8 status)
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
struct hci_cp_create_conn *cp;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
struct hci_conn *conn;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s status 0x%x", hdev->name, status);
cp = hci_sent_cmd_data(hdev, HCI_OP_CREATE_CONN);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (!cp)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &cp->bdaddr);
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s bdaddr %s conn %p", hdev->name, batostr(&cp->bdaddr), conn);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (status) {
if (conn && conn->state == BT_CONNECT) {
[Bluetooth] Support concurrent connect requests Most Bluetooth chips don't support concurrent connect requests, because this would involve a multiple baseband page with only one radio. In the case an upper layer like L2CAP requests a concurrent connect these chips return the error "Command Disallowed" for the second request. If this happens it the responsibility of the Bluetooth core to queue the request and try again after the previous connect attempt has been completed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-10-15 17:30:56 +02:00
if (status != 0x0c || conn->attempt > 2) {
conn->state = BT_CLOSED;
hci_proto_connect_cfm(conn, status);
hci_conn_del(conn);
} else
conn->state = BT_CONNECT2;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
} else {
if (!conn) {
conn = hci_conn_add(hdev, ACL_LINK, &cp->bdaddr);
if (conn) {
conn->out = 1;
conn->link_mode |= HCI_LM_MASTER;
} else
BT_ERR("No memmory for new connection");
}
}
hci_dev_unlock(hdev);
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static void hci_cs_add_sco(struct hci_dev *hdev, __u8 status)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
struct hci_cp_add_sco *cp;
struct hci_conn *acl, *sco;
__u16 handle;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 14:55:10 +02:00
BT_DBG("%s status 0x%x", hdev->name, status);
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (!status)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
cp = hci_sent_cmd_data(hdev, HCI_OP_ADD_SCO);
if (!cp)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
handle = __le16_to_cpu(cp->handle);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s handle %d", hdev->name, handle);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_dev_lock(hdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
acl = hci_conn_hash_lookup_handle(hdev, handle);
if (acl && (sco = acl->link)) {
sco->state = BT_CLOSED;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_proto_connect_cfm(sco, status);
hci_conn_del(sco);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_dev_unlock(hdev);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static void hci_cs_remote_name_req(struct hci_dev *hdev, __u8 status)
{
BT_DBG("%s status 0x%x", hdev->name, status);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static void hci_cs_setup_sync_conn(struct hci_dev *hdev, __u8 status)
{
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 14:55:10 +02:00
struct hci_cp_setup_sync_conn *cp;
struct hci_conn *acl, *sco;
__u16 handle;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s status 0x%x", hdev->name, status);
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 14:55:10 +02:00
if (!status)
return;
cp = hci_sent_cmd_data(hdev, HCI_OP_SETUP_SYNC_CONN);
if (!cp)
return;
handle = __le16_to_cpu(cp->handle);
BT_DBG("%s handle %d", hdev->name, handle);
hci_dev_lock(hdev);
acl = hci_conn_hash_lookup_handle(hdev, handle);
if (acl && (sco = acl->link)) {
sco->state = BT_CLOSED;
hci_proto_connect_cfm(sco, status);
hci_conn_del(sco);
}
hci_dev_unlock(hdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static void hci_cs_sniff_mode(struct hci_dev *hdev, __u8 status)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
struct hci_cp_sniff_mode *cp;
struct hci_conn *conn;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s status 0x%x", hdev->name, status);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (!status)
return;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
cp = hci_sent_cmd_data(hdev, HCI_OP_SNIFF_MODE);
if (!cp)
return;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_dev_lock(hdev);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle));
if (conn)
clear_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->pend);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_dev_unlock(hdev);
}
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static void hci_cs_exit_sniff_mode(struct hci_dev *hdev, __u8 status)
{
struct hci_cp_exit_sniff_mode *cp;
struct hci_conn *conn;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s status 0x%x", hdev->name, status);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (!status)
return;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
cp = hci_sent_cmd_data(hdev, HCI_OP_EXIT_SNIFF_MODE);
if (!cp)
return;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_dev_lock(hdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle));
if (conn)
clear_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->pend);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_dev_unlock(hdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
static inline void hci_inquiry_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
BT_DBG("%s status %d", hdev->name, status);
clear_bit(HCI_INQUIRY, &hdev->flags);
[Bluetooth] Handling pending connect attempts after inquiry After an inquiry completed or got canceled the Bluetooth core should check for any pending connect attempts. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-11-18 22:14:22 +01:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_req_complete(hdev, status);
[Bluetooth] Handling pending connect attempts after inquiry After an inquiry completed or got canceled the Bluetooth core should check for any pending connect attempts. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-11-18 22:14:22 +01:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_conn_check_pending(hdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
static inline void hci_inquiry_result_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
[Bluetooth]: Workaround for inquiry results with RSSI and page scan mode This patch implements a workaround for buggy Bluetooth 1.2 devices from Silicon Wave. Their inquiry results with RSSI contain the page scan mode field. This field was removed in the final Bluetooth 1.2 specification. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-09 20:27:49 -07:00
struct inquiry_data data;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
struct inquiry_info *info = (void *) (skb->data + 1);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
int num_rsp = *((__u8 *) skb->data);
BT_DBG("%s num_rsp %d", hdev->name, num_rsp);
[Bluetooth]: Workaround for inquiry results with RSSI and page scan mode This patch implements a workaround for buggy Bluetooth 1.2 devices from Silicon Wave. Their inquiry results with RSSI contain the page scan mode field. This field was removed in the final Bluetooth 1.2 specification. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-09 20:27:49 -07:00
if (!num_rsp)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
hci_dev_lock(hdev);
[Bluetooth]: Workaround for inquiry results with RSSI and page scan mode This patch implements a workaround for buggy Bluetooth 1.2 devices from Silicon Wave. Their inquiry results with RSSI contain the page scan mode field. This field was removed in the final Bluetooth 1.2 specification. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-09 20:27:49 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
for (; num_rsp; num_rsp--) {
bacpy(&data.bdaddr, &info->bdaddr);
data.pscan_rep_mode = info->pscan_rep_mode;
data.pscan_period_mode = info->pscan_period_mode;
data.pscan_mode = info->pscan_mode;
memcpy(data.dev_class, info->dev_class, 3);
data.clock_offset = info->clock_offset;
data.rssi = 0x00;
info++;
hci_inquiry_cache_update(hdev, &data);
}
[Bluetooth]: Workaround for inquiry results with RSSI and page scan mode This patch implements a workaround for buggy Bluetooth 1.2 devices from Silicon Wave. Their inquiry results with RSSI contain the page scan mode field. This field was removed in the final Bluetooth 1.2 specification. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-09 20:27:49 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
hci_dev_unlock(hdev);
}
static inline void hci_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
struct hci_ev_conn_complete *ev = (void *) skb->data;
struct hci_conn *conn;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
BT_DBG("%s", hdev->name);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr);
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (!conn)
goto unlock;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (!ev->status) {
conn->handle = __le16_to_cpu(ev->handle);
conn->state = BT_CONNECTED;
if (test_bit(HCI_AUTH, &hdev->flags))
conn->link_mode |= HCI_LM_AUTH;
if (test_bit(HCI_ENCRYPT, &hdev->flags))
conn->link_mode |= HCI_LM_ENCRYPT;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
/* Get remote features */
if (conn->type == ACL_LINK) {
struct hci_cp_read_remote_features cp;
cp.handle = ev->handle;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_send_cmd(hdev, HCI_OP_READ_REMOTE_FEATURES, sizeof(cp), &cp);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* Set link policy */
if (conn->type == ACL_LINK && hdev->link_policy) {
struct hci_cp_write_link_policy cp;
cp.handle = ev->handle;
[NET] BLUETOOTH: Use cpu_to_le{16,32}() where appropriate. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25 20:12:50 -07:00
cp.policy = cpu_to_le16(hdev->link_policy);
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_send_cmd(hdev, HCI_OP_WRITE_LINK_POLICY, sizeof(cp), &cp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
/* Set packet type for incoming connection */
if (!conn->out) {
struct hci_cp_change_conn_ptype cp;
cp.handle = ev->handle;
[NET] BLUETOOTH: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 23:24:33 +09:00
cp.pkt_type = (conn->type == ACL_LINK) ?
[NET] BLUETOOTH: Use cpu_to_le{16,32}() where appropriate. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25 20:12:50 -07:00
cpu_to_le16(hdev->pkt_type & ACL_PTYPE_MASK):
cpu_to_le16(hdev->pkt_type & SCO_PTYPE_MASK);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_send_cmd(hdev, HCI_OP_CHANGE_CONN_PTYPE, sizeof(cp), &cp);
[Bluetooth]: Don't update disconnect timer for incoming connections In the case of device pairing the only safe method is to establish a low-level ACL link. In this case, the remote side should not use the disconnect timer to give the other side the chance to enter the PIN code. If the disconnect timer is used, the connection will be dropped to soon, because it is impossible to identify an actual user of this link. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28 15:29:09 -07:00
} else {
/* Update disconnect timer */
hci_conn_hold(conn);
hci_conn_put(conn);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
} else
conn->state = BT_CLOSED;
if (conn->type == ACL_LINK) {
struct hci_conn *sco = conn->link;
if (sco) {
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 14:55:10 +02:00
if (!ev->status) {
if (lmp_esco_capable(hdev))
hci_setup_sync(sco, conn->handle);
else
hci_add_sco(sco, conn->handle);
} else {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
hci_proto_connect_cfm(sco, ev->status);
hci_conn_del(sco);
}
}
}
hci_proto_connect_cfm(conn, ev->status);
if (ev->status)
hci_conn_del(conn);
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
unlock:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
hci_dev_unlock(hdev);
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_conn_check_pending(hdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static inline void hci_conn_request_evt(struct hci_dev *hdev, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
struct hci_ev_conn_request *ev = (void *) skb->data;
int mask = hdev->link_mode;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s bdaddr %s type 0x%x", hdev->name,
batostr(&ev->bdaddr), ev->link_type);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
mask |= hci_proto_connect_ind(hdev, &ev->bdaddr, ev->link_type);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (mask & HCI_LM_ACCEPT) {
/* Connection accepted */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
struct hci_conn *conn;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_dev_lock(hdev);
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 14:55:10 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr);
if (!conn) {
if (!(conn = hci_conn_add(hdev, ev->link_type, &ev->bdaddr))) {
BT_ERR("No memmory for new connection");
hci_dev_unlock(hdev);
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
}
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 14:55:10 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
memcpy(conn->dev_class, ev->dev_class, 3);
conn->state = BT_CONNECT;
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 14:55:10 +02:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_dev_unlock(hdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 14:55:10 +02:00
if (ev->link_type == ACL_LINK || !lmp_esco_capable(hdev)) {
struct hci_cp_accept_conn_req cp;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 14:55:10 +02:00
bacpy(&cp.bdaddr, &ev->bdaddr);
if (lmp_rswitch_capable(hdev) && (mask & HCI_LM_MASTER))
cp.role = 0x00; /* Become master */
else
cp.role = 0x01; /* Remain slave */
hci_send_cmd(hdev, HCI_OP_ACCEPT_CONN_REQ,
sizeof(cp), &cp);
} else {
struct hci_cp_accept_sync_conn_req cp;
bacpy(&cp.bdaddr, &ev->bdaddr);
cp.pkt_type = cpu_to_le16(hdev->esco_type);
cp.tx_bandwidth = cpu_to_le32(0x00001f40);
cp.rx_bandwidth = cpu_to_le32(0x00001f40);
cp.max_latency = cpu_to_le16(0xffff);
cp.content_format = cpu_to_le16(hdev->voice_setting);
cp.retrans_effort = 0xff;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 14:55:10 +02:00
hci_send_cmd(hdev, HCI_OP_ACCEPT_SYNC_CONN_REQ,
sizeof(cp), &cp);
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
} else {
/* Connection rejected */
struct hci_cp_reject_conn_req cp;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
bacpy(&cp.bdaddr, &ev->bdaddr);
cp.reason = 0x0f;
hci_send_cmd(hdev, HCI_OP_REJECT_CONN_REQ, sizeof(cp), &cp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static inline void hci_disconn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
struct hci_ev_disconn_complete *ev = (void *) skb->data;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
struct hci_conn *conn;
BT_DBG("%s status %d", hdev->name, ev->status);
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (ev->status)
return;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
if (conn) {
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
conn->state = BT_CLOSED;
hci_proto_disconn_ind(conn, ev->reason);
hci_conn_del(conn);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
}
hci_dev_unlock(hdev);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
static inline void hci_auth_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
struct hci_ev_auth_complete *ev = (void *) skb->data;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
struct hci_conn *conn;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
BT_DBG("%s status %d", hdev->name, ev->status);
hci_dev_lock(hdev);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (conn) {
if (!ev->status)
conn->link_mode |= HCI_LM_AUTH;
clear_bit(HCI_CONN_AUTH_PEND, &conn->pend);
hci_auth_cfm(conn, ev->status);
if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend)) {
if (!ev->status) {
struct hci_cp_set_conn_encrypt cp;
[NET] BLUETOOTH: Use cpu_to_le{16,32}() where appropriate. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25 20:12:50 -07:00
cp.handle = cpu_to_le16(conn->handle);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cp.encrypt = 1;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_send_cmd(conn->hdev,
HCI_OP_SET_CONN_ENCRYPT, sizeof(cp), &cp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
} else {
clear_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend);
hci_encrypt_cfm(conn, ev->status, 0x00);
}
}
}
hci_dev_unlock(hdev);
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static inline void hci_remote_name_evt(struct hci_dev *hdev, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s", hdev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_conn_check_pending(hdev);
}
static inline void hci_encrypt_change_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_encrypt_change *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status %d", hdev->name, ev->status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
hci_dev_lock(hdev);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (conn) {
if (!ev->status) {
if (ev->encrypt)
conn->link_mode |= HCI_LM_ENCRYPT;
else
conn->link_mode &= ~HCI_LM_ENCRYPT;
}
clear_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend);
hci_encrypt_cfm(conn, ev->status, ev->encrypt);
}
hci_dev_unlock(hdev);
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static inline void hci_change_link_key_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
struct hci_ev_change_link_key_complete *ev = (void *) skb->data;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
struct hci_conn *conn;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
BT_DBG("%s status %d", hdev->name, ev->status);
hci_dev_lock(hdev);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (conn) {
if (!ev->status)
conn->link_mode |= HCI_LM_SECURE;
clear_bit(HCI_CONN_AUTH_PEND, &conn->pend);
hci_key_change_cfm(conn, ev->status);
}
hci_dev_unlock(hdev);
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static inline void hci_remote_features_evt(struct hci_dev *hdev, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
struct hci_ev_remote_features *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status %d", hdev->name, ev->status);
if (ev->status)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
if (conn)
memcpy(conn->features, ev->features, 8);
hci_dev_unlock(hdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static inline void hci_remote_version_evt(struct hci_dev *hdev, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s", hdev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static inline void hci_qos_setup_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s", hdev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static inline void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_cmd_complete *ev = (void *) skb->data;
__u16 opcode;
skb_pull(skb, sizeof(*ev));
opcode = __le16_to_cpu(ev->opcode);
switch (opcode) {
case HCI_OP_INQUIRY_CANCEL:
hci_cc_inquiry_cancel(hdev, skb);
break;
case HCI_OP_EXIT_PERIODIC_INQ:
hci_cc_exit_periodic_inq(hdev, skb);
break;
case HCI_OP_REMOTE_NAME_REQ_CANCEL:
hci_cc_remote_name_req_cancel(hdev, skb);
break;
case HCI_OP_ROLE_DISCOVERY:
hci_cc_role_discovery(hdev, skb);
break;
case HCI_OP_WRITE_LINK_POLICY:
hci_cc_write_link_policy(hdev, skb);
break;
case HCI_OP_RESET:
hci_cc_reset(hdev, skb);
break;
case HCI_OP_WRITE_LOCAL_NAME:
hci_cc_write_local_name(hdev, skb);
break;
case HCI_OP_READ_LOCAL_NAME:
hci_cc_read_local_name(hdev, skb);
break;
case HCI_OP_WRITE_AUTH_ENABLE:
hci_cc_write_auth_enable(hdev, skb);
break;
case HCI_OP_WRITE_ENCRYPT_MODE:
hci_cc_write_encrypt_mode(hdev, skb);
break;
case HCI_OP_WRITE_SCAN_ENABLE:
hci_cc_write_scan_enable(hdev, skb);
break;
case HCI_OP_READ_CLASS_OF_DEV:
hci_cc_read_class_of_dev(hdev, skb);
break;
case HCI_OP_WRITE_CLASS_OF_DEV:
hci_cc_write_class_of_dev(hdev, skb);
break;
case HCI_OP_READ_VOICE_SETTING:
hci_cc_read_voice_setting(hdev, skb);
break;
case HCI_OP_WRITE_VOICE_SETTING:
hci_cc_write_voice_setting(hdev, skb);
break;
case HCI_OP_HOST_BUFFER_SIZE:
hci_cc_host_buffer_size(hdev, skb);
break;
case HCI_OP_READ_LOCAL_VERSION:
hci_cc_read_local_version(hdev, skb);
break;
case HCI_OP_READ_LOCAL_COMMANDS:
hci_cc_read_local_commands(hdev, skb);
break;
case HCI_OP_READ_LOCAL_FEATURES:
hci_cc_read_local_features(hdev, skb);
break;
case HCI_OP_READ_BUFFER_SIZE:
hci_cc_read_buffer_size(hdev, skb);
break;
case HCI_OP_READ_BD_ADDR:
hci_cc_read_bd_addr(hdev, skb);
break;
default:
BT_DBG("%s opcode 0x%x", hdev->name, opcode);
break;
}
if (ev->ncmd) {
atomic_set(&hdev->cmd_cnt, 1);
if (!skb_queue_empty(&hdev->cmd_q))
hci_sched_cmd(hdev);
}
}
static inline void hci_cmd_status_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_cmd_status *ev = (void *) skb->data;
__u16 opcode;
skb_pull(skb, sizeof(*ev));
opcode = __le16_to_cpu(ev->opcode);
switch (opcode) {
case HCI_OP_INQUIRY:
hci_cs_inquiry(hdev, ev->status);
break;
case HCI_OP_CREATE_CONN:
hci_cs_create_conn(hdev, ev->status);
break;
case HCI_OP_ADD_SCO:
hci_cs_add_sco(hdev, ev->status);
break;
case HCI_OP_REMOTE_NAME_REQ:
hci_cs_remote_name_req(hdev, ev->status);
break;
case HCI_OP_SETUP_SYNC_CONN:
hci_cs_setup_sync_conn(hdev, ev->status);
break;
case HCI_OP_SNIFF_MODE:
hci_cs_sniff_mode(hdev, ev->status);
break;
case HCI_OP_EXIT_SNIFF_MODE:
hci_cs_exit_sniff_mode(hdev, ev->status);
break;
default:
BT_DBG("%s opcode 0x%x", hdev->name, opcode);
break;
}
if (ev->ncmd) {
atomic_set(&hdev->cmd_cnt, 1);
if (!skb_queue_empty(&hdev->cmd_q))
hci_sched_cmd(hdev);
}
}
static inline void hci_role_change_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_role_change *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status %d", hdev->name, ev->status);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
if (conn) {
if (!ev->status) {
if (ev->role)
conn->link_mode &= ~HCI_LM_MASTER;
else
conn->link_mode |= HCI_LM_MASTER;
}
clear_bit(HCI_CONN_RSWITCH_PEND, &conn->pend);
hci_role_switch_cfm(conn, ev->status, ev->role);
}
hci_dev_unlock(hdev);
}
static inline void hci_num_comp_pkts_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_num_comp_pkts *ev = (void *) skb->data;
__le16 *ptr;
int i;
skb_pull(skb, sizeof(*ev));
BT_DBG("%s num_hndl %d", hdev->name, ev->num_hndl);
if (skb->len < ev->num_hndl * 4) {
BT_DBG("%s bad parameters", hdev->name);
return;
}
tasklet_disable(&hdev->tx_task);
for (i = 0, ptr = (__le16 *) skb->data; i < ev->num_hndl; i++) {
struct hci_conn *conn;
__u16 handle, count;
handle = __le16_to_cpu(get_unaligned(ptr++));
count = __le16_to_cpu(get_unaligned(ptr++));
conn = hci_conn_hash_lookup_handle(hdev, handle);
if (conn) {
conn->sent -= count;
if (conn->type == ACL_LINK) {
if ((hdev->acl_cnt += count) > hdev->acl_pkts)
hdev->acl_cnt = hdev->acl_pkts;
} else {
if ((hdev->sco_cnt += count) > hdev->sco_pkts)
hdev->sco_cnt = hdev->sco_pkts;
}
}
}
hci_sched_tx(hdev);
tasklet_enable(&hdev->tx_task);
}
static inline void hci_mode_change_evt(struct hci_dev *hdev, struct sk_buff *skb)
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
struct hci_ev_mode_change *ev = (void *) skb->data;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
struct hci_conn *conn;
BT_DBG("%s status %d", hdev->name, ev->status);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (conn) {
conn->mode = ev->mode;
conn->interval = __le16_to_cpu(ev->interval);
if (!test_and_clear_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->pend)) {
if (conn->mode == HCI_CM_ACTIVE)
conn->power_save = 1;
else
conn->power_save = 0;
}
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
}
hci_dev_unlock(hdev);
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static inline void hci_pin_code_request_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
BT_DBG("%s", hdev->name);
}
static inline void hci_link_key_request_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
BT_DBG("%s", hdev->name);
}
static inline void hci_link_key_notify_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
BT_DBG("%s", hdev->name);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
static inline void hci_clock_offset_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
struct hci_ev_clock_offset *ev = (void *) skb->data;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
struct hci_conn *conn;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
BT_DBG("%s status %d", hdev->name, ev->status);
hci_dev_lock(hdev);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (conn && !ev->status) {
struct inquiry_entry *ie;
if ((ie = hci_inquiry_cache_lookup(hdev, &conn->dst))) {
ie->data.clock_offset = ev->clock_offset;
ie->timestamp = jiffies;
}
}
hci_dev_unlock(hdev);
}
[Bluetooth]: Track page scan repetition mode changes The HCI page scan repetition mode change event contains the actual page scan repetition mode for the remote device. It is the same value that is received from an inquiry response and it can be used to make further reconnections faster. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-09 20:28:02 -07:00
static inline void hci_pscan_rep_mode_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
struct hci_ev_pscan_rep_mode *ev = (void *) skb->data;
[Bluetooth]: Track page scan repetition mode changes The HCI page scan repetition mode change event contains the actual page scan repetition mode for the remote device. It is the same value that is received from an inquiry response and it can be used to make further reconnections faster. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-09 20:28:02 -07:00
struct inquiry_entry *ie;
BT_DBG("%s", hdev->name);
hci_dev_lock(hdev);
if ((ie = hci_inquiry_cache_lookup(hdev, &ev->bdaddr))) {
ie->data.pscan_rep_mode = ev->pscan_rep_mode;
ie->timestamp = jiffies;
}
hci_dev_unlock(hdev);
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static inline void hci_inquiry_result_with_rssi_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct inquiry_data data;
int num_rsp = *((__u8 *) skb->data);
BT_DBG("%s num_rsp %d", hdev->name, num_rsp);
if (!num_rsp)
return;
hci_dev_lock(hdev);
if ((skb->len - 1) / num_rsp != sizeof(struct inquiry_info_with_rssi)) {
struct inquiry_info_with_rssi_and_pscan_mode *info = (void *) (skb->data + 1);
for (; num_rsp; num_rsp--) {
bacpy(&data.bdaddr, &info->bdaddr);
data.pscan_rep_mode = info->pscan_rep_mode;
data.pscan_period_mode = info->pscan_period_mode;
data.pscan_mode = info->pscan_mode;
memcpy(data.dev_class, info->dev_class, 3);
data.clock_offset = info->clock_offset;
data.rssi = info->rssi;
info++;
hci_inquiry_cache_update(hdev, &data);
}
} else {
struct inquiry_info_with_rssi *info = (void *) (skb->data + 1);
for (; num_rsp; num_rsp--) {
bacpy(&data.bdaddr, &info->bdaddr);
data.pscan_rep_mode = info->pscan_rep_mode;
data.pscan_period_mode = info->pscan_period_mode;
data.pscan_mode = 0x00;
memcpy(data.dev_class, info->dev_class, 3);
data.clock_offset = info->clock_offset;
data.rssi = info->rssi;
info++;
hci_inquiry_cache_update(hdev, &data);
}
}
hci_dev_unlock(hdev);
}
static inline void hci_remote_ext_features_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
BT_DBG("%s", hdev->name);
}
static inline void hci_sync_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 14:55:10 +02:00
struct hci_ev_sync_conn_complete *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status %d", hdev->name, ev->status);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr);
if (!conn)
goto unlock;
if (!ev->status) {
conn->handle = __le16_to_cpu(ev->handle);
conn->state = BT_CONNECTED;
} else
conn->state = BT_CLOSED;
hci_proto_connect_cfm(conn, ev->status);
if (ev->status)
hci_conn_del(conn);
unlock:
hci_dev_unlock(hdev);
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
}
static inline void hci_sync_conn_changed_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
BT_DBG("%s", hdev->name);
}
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
static inline void hci_sniff_subrate_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
struct hci_ev_sniff_subrate *ev = (void *) skb->data;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
struct hci_conn *conn;
BT_DBG("%s status %d", hdev->name, ev->status);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
if (conn) {
}
hci_dev_unlock(hdev);
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
static inline void hci_extended_inquiry_result_evt(struct hci_dev *hdev, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
struct inquiry_data data;
struct extended_inquiry_info *info = (void *) (skb->data + 1);
int num_rsp = *((__u8 *) skb->data);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
BT_DBG("%s num_rsp %d", hdev->name, num_rsp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
if (!num_rsp)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
hci_dev_lock(hdev);
for (; num_rsp; num_rsp--) {
bacpy(&data.bdaddr, &info->bdaddr);
data.pscan_rep_mode = info->pscan_rep_mode;
data.pscan_period_mode = info->pscan_period_mode;
data.pscan_mode = 0x00;
memcpy(data.dev_class, info->dev_class, 3);
data.clock_offset = info->clock_offset;
data.rssi = info->rssi;
info++;
hci_inquiry_cache_update(hdev, &data);
}
hci_dev_unlock(hdev);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
void hci_event_packet(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_event_hdr *hdr = (void *) skb->data;
__u8 event = hdr->evt;
skb_pull(skb, HCI_EVENT_HDR_SIZE);
switch (event) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
case HCI_EV_INQUIRY_COMPLETE:
hci_inquiry_complete_evt(hdev, skb);
break;
case HCI_EV_INQUIRY_RESULT:
hci_inquiry_result_evt(hdev, skb);
break;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
case HCI_EV_CONN_COMPLETE:
hci_conn_complete_evt(hdev, skb);
[Bluetooth] Add support for extended inquiry responses This patch adds the handling of the extended inquiry responses and inserts them into the inquiry cache. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2005-09-13 01:32:25 +02:00
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
case HCI_EV_CONN_REQUEST:
hci_conn_request_evt(hdev, skb);
break;
case HCI_EV_DISCONN_COMPLETE:
hci_disconn_complete_evt(hdev, skb);
break;
case HCI_EV_AUTH_COMPLETE:
hci_auth_complete_evt(hdev, skb);
break;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
case HCI_EV_REMOTE_NAME:
hci_remote_name_evt(hdev, skb);
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
case HCI_EV_ENCRYPT_CHANGE:
hci_encrypt_change_evt(hdev, skb);
break;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
case HCI_EV_CHANGE_LINK_KEY_COMPLETE:
hci_change_link_key_complete_evt(hdev, skb);
break;
case HCI_EV_REMOTE_FEATURES:
hci_remote_features_evt(hdev, skb);
break;
case HCI_EV_REMOTE_VERSION:
hci_remote_version_evt(hdev, skb);
break;
case HCI_EV_QOS_SETUP_COMPLETE:
hci_qos_setup_complete_evt(hdev, skb);
break;
case HCI_EV_CMD_COMPLETE:
hci_cmd_complete_evt(hdev, skb);
break;
case HCI_EV_CMD_STATUS:
hci_cmd_status_evt(hdev, skb);
break;
case HCI_EV_ROLE_CHANGE:
hci_role_change_evt(hdev, skb);
break;
case HCI_EV_NUM_COMP_PKTS:
hci_num_comp_pkts_evt(hdev, skb);
break;
case HCI_EV_MODE_CHANGE:
hci_mode_change_evt(hdev, skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
break;
case HCI_EV_PIN_CODE_REQ:
hci_pin_code_request_evt(hdev, skb);
break;
case HCI_EV_LINK_KEY_REQ:
hci_link_key_request_evt(hdev, skb);
break;
case HCI_EV_LINK_KEY_NOTIFY:
hci_link_key_notify_evt(hdev, skb);
break;
case HCI_EV_CLOCK_OFFSET:
hci_clock_offset_evt(hdev, skb);
break;
[Bluetooth]: Track page scan repetition mode changes The HCI page scan repetition mode change event contains the actual page scan repetition mode for the remote device. It is the same value that is received from an inquiry response and it can be used to make further reconnections faster. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-09 20:28:02 -07:00
case HCI_EV_PSCAN_REP_MODE:
hci_pscan_rep_mode_evt(hdev, skb);
break;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
case HCI_EV_INQUIRY_RESULT_WITH_RSSI:
hci_inquiry_result_with_rssi_evt(hdev, skb);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 10:02:33 +02:00
break;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
case HCI_EV_REMOTE_EXT_FEATURES:
hci_remote_ext_features_evt(hdev, skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
break;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
case HCI_EV_SYNC_CONN_COMPLETE:
hci_sync_conn_complete_evt(hdev, skb);
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
case HCI_EV_SYNC_CONN_CHANGED:
hci_sync_conn_changed_evt(hdev, skb);
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
case HCI_EV_SNIFF_SUBRATE:
hci_sniff_subrate_evt(hdev, skb);
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
case HCI_EV_EXTENDED_INQUIRY_RESULT:
hci_extended_inquiry_result_evt(hdev, skb);
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 13:33:56 +02:00
default:
BT_DBG("%s event 0x%x", hdev->name, event);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
break;
}
kfree_skb(skb);
hdev->stat.evt_rx++;
}
/* Generate internal stack event */
void hci_si_event(struct hci_dev *hdev, int type, int dlen, void *data)
{
struct hci_event_hdr *hdr;
struct hci_ev_stack_internal *ev;
struct sk_buff *skb;
skb = bt_skb_alloc(HCI_EVENT_HDR_SIZE + sizeof(*ev) + dlen, GFP_ATOMIC);
if (!skb)
return;
hdr = (void *) skb_put(skb, HCI_EVENT_HDR_SIZE);
hdr->evt = HCI_EV_STACK_INTERNAL;
hdr->plen = sizeof(*ev) + dlen;
ev = (void *) skb_put(skb, sizeof(*ev) + dlen);
ev->type = type;
memcpy(ev->data, data, dlen);
[Bluetooth] Add direction and timestamp to stack internal events This patch changes the direction to incoming and adds the timestamp to all stack internal events. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2005-08-06 12:36:54 +02:00
bt_cb(skb)->incoming = 1;
[NET]: Store skb->timestamp as offset to a base timestamp Reduces skb size by 8 bytes on 64-bit. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-14 17:24:31 -07:00
__net_timestamp(skb);
[Bluetooth] Add direction and timestamp to stack internal events This patch changes the direction to incoming and adds the timestamp to all stack internal events. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2005-08-06 12:36:54 +02:00
[Bluetooth]: Move packet type into the SKB control buffer This patch moves the usage of packet type into the SKB control buffer. After this patch it is now possible to shrink the sk_buff structure and redefine its pkt_type. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-09 20:30:28 -07:00
bt_cb(skb)->pkt_type = HCI_EVENT_PKT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
skb->dev = (void *) hdev;
hci_send_to_sock(hdev, skb);
kfree_skb(skb);
}
Reference in a new issue Copy permalink