linux-pinenote/drivers/net/can/sja1000/sja1000.h

/*
 * sja1000.h -  Philips SJA1000 network device driver
 *
 * Copyright (c) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33,
 * 38106 Braunschweig, GERMANY
 *
 * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of Volkswagen nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * Alternatively, provided that this notice is retained in full, this
 * software may be distributed under the terms of the GNU General
 * Public License ("GPL") version 2, in which case the provisions of the
 * GPL apply INSTEAD OF those given above.
 *
 * The provided data structures and external interfaces from this code
 * are not restricted to be used by modules with a GPL compatible license.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
 * DAMAGE.
 *
 */

#ifndef SJA1000_DEV_H
#define SJA1000_DEV_H

#include <linux/irqreturn.h>
#include <linux/can/dev.h>
#include <linux/can/platform/sja1000.h>

#define SJA1000_ECHO_SKB_MAX	1 /* the SJA1000 has one TX buffer object */

#define SJA1000_MAX_IRQ 20	/* max. number of interrupts handled in ISR */

/* SJA1000 registers - manual section 6.4 (Pelican Mode) */
#define REG_MOD		0x00
#define REG_CMR		0x01
#define REG_SR		0x02
#define REG_IR		0x03
#define REG_IER		0x04
#define REG_ALC		0x0B
#define REG_ECC		0x0C
#define REG_EWL		0x0D
#define REG_RXERR	0x0E
#define REG_TXERR	0x0F
#define REG_ACCC0	0x10
#define REG_ACCC1	0x11
#define REG_ACCC2	0x12
#define REG_ACCC3	0x13
#define REG_ACCM0	0x14
#define REG_ACCM1	0x15
#define REG_ACCM2	0x16
#define REG_ACCM3	0x17
#define REG_RMC		0x1D
#define REG_RBSA	0x1E

/* Common registers - manual section 6.5 */
#define REG_BTR0	0x06
#define REG_BTR1	0x07
#define REG_OCR		0x08
#define REG_CDR		0x1F

#define REG_FI		0x10
#define SFF_BUF		0x13
#define EFF_BUF		0x15

#define FI_FF		0x80
#define FI_RTR		0x40

#define REG_ID1		0x11
#define REG_ID2		0x12
#define REG_ID3		0x13
#define REG_ID4		0x14

#define CAN_RAM		0x20

/* mode register */
#define MOD_RM		0x01
#define MOD_LOM		0x02
#define MOD_STM		0x04
#define MOD_AFM		0x08
#define MOD_SM		0x10

/* commands */
#define CMD_SRR		0x10
#define CMD_CDO		0x08
#define CMD_RRB		0x04
#define CMD_AT		0x02
#define CMD_TR		0x01

/* interrupt sources */
#define IRQ_BEI		0x80
#define IRQ_ALI		0x40
#define IRQ_EPI		0x20
#define IRQ_WUI		0x10
#define IRQ_DOI		0x08
#define IRQ_EI		0x04
#define IRQ_TI		0x02
#define IRQ_RI		0x01
#define IRQ_ALL		0xFF
#define IRQ_OFF		0x00

/* status register content */
#define SR_BS		0x80
#define SR_ES		0x40
#define SR_TS		0x20
#define SR_RS		0x10
#define SR_TCS		0x08
#define SR_TBS		0x04
#define SR_DOS		0x02
#define SR_RBS		0x01

#define SR_CRIT (SR_BS|SR_ES)

/* ECC register */
#define ECC_SEG		0x1F
#define ECC_DIR		0x20
#define ECC_ERR		6
#define ECC_BIT		0x00
#define ECC_FORM	0x40
#define ECC_STUFF	0x80
#define ECC_MASK	0xc0

/*
 * Flags for sja1000priv.flags
 */
#define SJA1000_CUSTOM_IRQ_HANDLER 0x1

/*
 * SJA1000 private data structure
 */
struct sja1000_priv {
	struct can_priv can;	/* must be the first member */
	struct sk_buff *echo_skb;

	/* the lower-layer is responsible for appropriate locking */
	u8 (*read_reg) (const struct sja1000_priv *priv, int reg);
	void (*write_reg) (const struct sja1000_priv *priv, int reg, u8 val);
	void (*pre_irq) (const struct sja1000_priv *priv);
	void (*post_irq) (const struct sja1000_priv *priv);

	void *priv;		/* for board-specific data */
	struct net_device *dev;

	void __iomem *reg_base;	 /* ioremap'ed address to registers */
	unsigned long irq_flags; /* for request_irq() */
	spinlock_t cmdreg_lock;  /* lock for concurrent cmd register writes */

	u16 flags;		/* custom mode flags */
	u8 ocr;			/* output control register */
	u8 cdr;			/* clock divider register */
};

struct net_device *alloc_sja1000dev(int sizeof_priv);
void free_sja1000dev(struct net_device *dev);
int register_sja1000dev(struct net_device *dev);
void unregister_sja1000dev(struct net_device *dev);

irqreturn_t sja1000_interrupt(int irq, void *dev_id);

#endif /* SJA1000_DEV_H */