forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
linux-pinenote/arch/arm/mach-spear/spear6xx.c

430 lines
8.8 KiB
C
Raw Normal View History

ARM: 6015/1: ST SPEAr: Added source files for SPEAr6xx machine family Reviewed-by: Linus Walleij <linux.walleij@stericsson.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-01 12:31:01 +01:00
/*
* arch/arm/mach-spear6xx/spear6xx.c
*
* SPEAr6XX machines common source file
*
* Copyright (C) 2009 ST Microelectronics
* Rajeev Kumar<rajeev-dlh.kumar@st.com>
*
ARM: SPEAr600: Add device-tree support to SPEAr600 boards This patch adds a generic target for SPEAr600 board that can be configured via the device-tree. Currently the following devices are supported via the devicetree: - VIC interrupts - PL011 UART - PL061 GPIO - Synopsys DW I2C - Synopsys DW ethernet Other peripheral devices (e.g. SMI flash, FSMC NAND flash etc) will follow in later patches. Only the spear600-evb is currently supported. Other SPEAr600 based boards will follow later. Since the current mainline SPEAr600 code only supports the SPEAr600 evaluation board, with nearly zero peripheral devices (only UART and GPIO), it makes sense to switch over to DT based configuration completely now. So this patch also removes all non-DT stuff, mainly platform device data. The files spear600.c and spear600_evb.c are removed completely. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 14:03:23 +01:00
* Copyright 2012 Stefan Roese <sr@denx.de>
*
ARM: 6015/1: ST SPEAr: Added source files for SPEAr6xx machine family Reviewed-by: Linus Walleij <linux.walleij@stericsson.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-01 12:31:01 +01:00
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
SPEAr: Add PL080 DMA support for 3xx and 6xx Both SPEAr3xx and SPEAr6xx families have one instance of ARM PL080 DMA controller. This patch adds in support for that. Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
2012-03-26 10:29:23 +05:30
#include <linux/amba/pl08x.h>
ARM: spear: remove most mach/*.h header contents The register and irq definitions in mach/*.h for spear3xx and spear6xx are now mostly obsolete, after the platforms have been converted to device tree based probing and the data is now part of the device tree files. The misc_regs.h contents are moved into clock.c because that is the only user, aside from the DMA_CHN_CFG that should eventually get handled differently. Some of the contents of mach/spear.h still remain, because they are used to set up the static map table, timer, uart and auxdata tables, but almost everything got removed. We might remove everything but the map table as the DT conversion completes, but that is not a priority. I've also made sure to make both copies of spear.h more or less identical so we can eventually combine them. The spear3?0.h files were only used by the spear3?0.c files, so I merged the contents in there and removed the bits that were unused. This is something that should still be looked at. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@st.com>
2012-04-11 17:30:11 +00:00
#include <linux/clk.h>
#include <linux/err.h>
ARM: SPEAr600: Add device-tree support to SPEAr600 boards This patch adds a generic target for SPEAr600 board that can be configured via the device-tree. Currently the following devices are supported via the devicetree: - VIC interrupts - PL011 UART - PL061 GPIO - Synopsys DW I2C - Synopsys DW ethernet Other peripheral devices (e.g. SMI flash, FSMC NAND flash etc) will follow in later patches. Only the spear600-evb is currently supported. Other SPEAr600 based boards will follow later. Since the current mainline SPEAr600 code only supports the SPEAr600 evaluation board, with nearly zero peripheral devices (only UART and GPIO), it makes sense to switch over to DT based configuration completely now. So this patch also removes all non-DT stuff, mainly platform device data. The files spear600.c and spear600_evb.c are removed completely. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 14:03:23 +01:00
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
pl080.h: moved from arm/include/asm/hardware to include/linux/amba/ The header is used by drivers/dma/amba-pl08x.c, which can be compiled under x86, where PL080 exists under a PCI-to-AMBA bridge. This patche moves it where it can be accessed by other architectures, and fixes all users. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2012-11-24 00:22:56 +00:00
#include <linux/amba/pl080.h>
ARM: 6015/1: ST SPEAr: Added source files for SPEAr6xx machine family Reviewed-by: Linus Walleij <linux.walleij@stericsson.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-01 12:31:01 +01:00
#include <asm/mach/arch.h>
ARM: spear: remove most mach/*.h header contents The register and irq definitions in mach/*.h for spear3xx and spear6xx are now mostly obsolete, after the platforms have been converted to device tree based probing and the data is now part of the device tree files. The misc_regs.h contents are moved into clock.c because that is the only user, aside from the DMA_CHN_CFG that should eventually get handled differently. Some of the contents of mach/spear.h still remain, because they are used to set up the static map table, timer, uart and auxdata tables, but almost everything got removed. We might remove everything but the map table as the DT conversion completes, but that is not a priority. I've also made sure to make both copies of spear.h more or less identical so we can eventually combine them. The spear3?0.h files were only used by the spear3?0.c files, so I merged the contents in there and removed the bits that were unused. This is something that should still be looked at. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@st.com>
2012-04-11 17:30:11 +00:00
#include <asm/mach/time.h>
#include <asm/mach/map.h>
ARM: spear: move generic.h and pl080.h into private dir No file outside of mach-spear includes these files any more, so they don't have to be globally visible now. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-12-02 15:49:04 +01:00
#include "pl080.h"
#include "generic.h"
ARM: spear: remove most mach/*.h header contents The register and irq definitions in mach/*.h for spear3xx and spear6xx are now mostly obsolete, after the platforms have been converted to device tree based probing and the data is now part of the device tree files. The misc_regs.h contents are moved into clock.c because that is the only user, aside from the DMA_CHN_CFG that should eventually get handled differently. Some of the contents of mach/spear.h still remain, because they are used to set up the static map table, timer, uart and auxdata tables, but almost everything got removed. We might remove everything but the map table as the DT conversion completes, but that is not a priority. I've also made sure to make both copies of spear.h more or less identical so we can eventually combine them. The spear3?0.h files were only used by the spear3?0.c files, so I merged the contents in there and removed the bits that were unused. This is something that should still be looked at. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@st.com>
2012-04-11 17:30:11 +00:00
#include <mach/spear.h>
ARM: spear: make clock driver independent of headers Device drivers should not access MMIO registers through hardcoded platform specific address constants. Instead, we can pass the MMIO token to the spear clock driver in the initialization routine to contain that knowledge in the platform code itself. Ideally, the clock driver would use of_iomap() or similar to get the address, and that can be used later, but for now, this is the minimal change. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-12-02 17:59:57 +01:00
#include <mach/misc_regs.h>
ARM: 6015/1: ST SPEAr: Added source files for SPEAr6xx machine family Reviewed-by: Linus Walleij <linux.walleij@stericsson.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-01 12:31:01 +01:00
SPEAr: Add PL080 DMA support for 3xx and 6xx Both SPEAr3xx and SPEAr6xx families have one instance of ARM PL080 DMA controller. This patch adds in support for that. Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
2012-03-26 10:29:23 +05:30
/* dmac device registration */
static struct pl08x_channel_data spear600_dma_info[] = {
{
.bus_id = "ssp1_rx",
.min_signal = 0,
.max_signal = 0,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp1_tx",
.min_signal = 1,
.max_signal = 1,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart0_rx",
.min_signal = 2,
.max_signal = 2,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart0_tx",
.min_signal = 3,
.max_signal = 3,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart1_rx",
.min_signal = 4,
.max_signal = 4,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart1_tx",
.min_signal = 5,
.max_signal = 5,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp2_rx",
.min_signal = 6,
.max_signal = 6,
.muxval = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ssp2_tx",
.min_signal = 7,
.max_signal = 7,
.muxval = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ssp0_rx",
.min_signal = 8,
.max_signal = 8,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp0_tx",
.min_signal = 9,
.max_signal = 9,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "i2c_rx",
.min_signal = 10,
.max_signal = 10,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "i2c_tx",
.min_signal = 11,
.max_signal = 11,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "irda",
.min_signal = 12,
.max_signal = 12,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "adc",
.min_signal = 13,
.max_signal = 13,
.muxval = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "to_jpeg",
.min_signal = 14,
.max_signal = 14,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "from_jpeg",
.min_signal = 15,
.max_signal = 15,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras0_rx",
.min_signal = 0,
.max_signal = 0,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras0_tx",
.min_signal = 1,
.max_signal = 1,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras1_rx",
.min_signal = 2,
.max_signal = 2,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras1_tx",
.min_signal = 3,
.max_signal = 3,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras2_rx",
.min_signal = 4,
.max_signal = 4,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras2_tx",
.min_signal = 5,
.max_signal = 5,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras3_rx",
.min_signal = 6,
.max_signal = 6,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras3_tx",
.min_signal = 7,
.max_signal = 7,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras4_rx",
.min_signal = 8,
.max_signal = 8,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras4_tx",
.min_signal = 9,
.max_signal = 9,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras5_rx",
.min_signal = 10,
.max_signal = 10,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras5_tx",
.min_signal = 11,
.max_signal = 11,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras6_rx",
.min_signal = 12,
.max_signal = 12,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras6_tx",
.min_signal = 13,
.max_signal = 13,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras7_rx",
.min_signal = 14,
.max_signal = 14,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras7_tx",
.min_signal = 15,
.max_signal = 15,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ext0_rx",
.min_signal = 0,
.max_signal = 0,
.muxval = 2,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext0_tx",
.min_signal = 1,
.max_signal = 1,
.muxval = 2,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext1_rx",
.min_signal = 2,
.max_signal = 2,
.muxval = 2,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext1_tx",
.min_signal = 3,
.max_signal = 3,
.muxval = 2,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext2_rx",
.min_signal = 4,
.max_signal = 4,
.muxval = 2,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext2_tx",
.min_signal = 5,
.max_signal = 5,
.muxval = 2,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext3_rx",
.min_signal = 6,
.max_signal = 6,
.muxval = 2,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext3_tx",
.min_signal = 7,
.max_signal = 7,
.muxval = 2,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext4_rx",
.min_signal = 8,
.max_signal = 8,
.muxval = 2,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext4_tx",
.min_signal = 9,
.max_signal = 9,
.muxval = 2,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext5_rx",
.min_signal = 10,
.max_signal = 10,
.muxval = 2,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext5_tx",
.min_signal = 11,
.max_signal = 11,
.muxval = 2,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext6_rx",
.min_signal = 12,
.max_signal = 12,
.muxval = 2,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext6_tx",
.min_signal = 13,
.max_signal = 13,
.muxval = 2,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext7_rx",
.min_signal = 14,
.max_signal = 14,
.muxval = 2,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext7_tx",
.min_signal = 15,
.max_signal = 15,
.muxval = 2,
.periph_buses = PL08X_AHB2,
},
};
ARM: spear: rename duplicate pl080_plat_data Both spear3xx and spear6xx have a global symbol named pl080_plat_data. Eventually, both should be removed, but for now, we can rename one to pl080_plat_data and declare it static, since that one does not actually need to be visible outside of spear6xx.c. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-12-06 14:48:28 +01:00
static struct pl08x_platform_data spear6xx_pl080_plat_data = {
SPEAr: Add PL080 DMA support for 3xx and 6xx Both SPEAr3xx and SPEAr6xx families have one instance of ARM PL080 DMA controller. This patch adds in support for that. Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
2012-03-26 10:29:23 +05:30
.memcpy_channel = {
.bus_id = "memcpy",
dmaengine: PL08x: get rid of unnecessary checks in dma_slave_config Get rid of the unnecessary checks in dma_slave_config utilizing the DMA direction. This allows us to move the computation of cctl to the prepare function. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-16 12:20:55 +01:00
.cctl_memcpy =
(PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
SPEAr: Add PL080 DMA support for 3xx and 6xx Both SPEAr3xx and SPEAr6xx families have one instance of ARM PL080 DMA controller. This patch adds in support for that. Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
2012-03-26 10:29:23 +05:30
PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
PL080_CONTROL_PROT_SYS),
},
.lli_buses = PL08X_AHB1,
.mem_buses = PL08X_AHB1,
dmaengine: PL08x: Avoid collisions with get_signal() macro As pointed out by Arnd Bergmann there is a get_signal macro definied in linux/signal.h which can conflict with the platform data callback function of the same name leading to confusing errors from the compiler (especially if signal.h manages to get pulled into the driver itself due to header dependencies). Avoid such errors by renaming get_signal and put_signal in the platform data to get_xfer_signal and put_xfer_signal. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-06-19 20:38:28 +01:00
.get_xfer_signal = pl080_get_signal,
.put_xfer_signal = pl080_put_signal,
SPEAr: Add PL080 DMA support for 3xx and 6xx Both SPEAr3xx and SPEAr6xx families have one instance of ARM PL080 DMA controller. This patch adds in support for that. Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
2012-03-26 10:29:23 +05:30
.slave_channels = spear600_dma_info,
.num_slave_channels = ARRAY_SIZE(spear600_dma_info),
};
ARM: spear: remove most mach/*.h header contents The register and irq definitions in mach/*.h for spear3xx and spear6xx are now mostly obsolete, after the platforms have been converted to device tree based probing and the data is now part of the device tree files. The misc_regs.h contents are moved into clock.c because that is the only user, aside from the DMA_CHN_CFG that should eventually get handled differently. Some of the contents of mach/spear.h still remain, because they are used to set up the static map table, timer, uart and auxdata tables, but almost everything got removed. We might remove everything but the map table as the DT conversion completes, but that is not a priority. I've also made sure to make both copies of spear.h more or less identical so we can eventually combine them. The spear3?0.h files were only used by the spear3?0.c files, so I merged the contents in there and removed the bits that were unused. This is something that should still be looked at. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@st.com>
2012-04-11 17:30:11 +00:00
/*
* Following will create 16MB static virtual/physical mappings
* PHYSICAL VIRTUAL
* 0xF0000000 0xF0000000
* 0xF1000000 0xF1000000
* 0xD0000000 0xFD000000
* 0xFC000000 0xFC000000
*/
struct map_desc spear6xx_io_desc[] __initdata = {
ARM: 6015/1: ST SPEAr: Added source files for SPEAr6xx machine family Reviewed-by: Linus Walleij <linux.walleij@stericsson.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-01 12:31:01 +01:00
{
ARM: spear: make clock driver independent of headers Device drivers should not access MMIO registers through hardcoded platform specific address constants. Instead, we can pass the MMIO token to the spear clock driver in the initialization routine to contain that knowledge in the platform code itself. Ideally, the clock driver would use of_iomap() or similar to get the address, and that can be used later, but for now, this is the minimal change. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-12-02 17:59:57 +01:00
.virtual = (unsigned long)VA_SPEAR6XX_ML_CPU_BASE,
ARM: spear: make spear3xx/6xx mach/spear.h files identical The two files are almost identical already basically just differ in the identifier names. By changing the identifiers to be the same, we are able to merge the two as a preparation to building a combined kernel. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-12-02 14:45:27 +01:00
.pfn = __phys_to_pfn(SPEAR_ICM3_ML1_2_BASE),
ARM: spear: remove most mach/*.h header contents The register and irq definitions in mach/*.h for spear3xx and spear6xx are now mostly obsolete, after the platforms have been converted to device tree based probing and the data is now part of the device tree files. The misc_regs.h contents are moved into clock.c because that is the only user, aside from the DMA_CHN_CFG that should eventually get handled differently. Some of the contents of mach/spear.h still remain, because they are used to set up the static map table, timer, uart and auxdata tables, but almost everything got removed. We might remove everything but the map table as the DT conversion completes, but that is not a priority. I've also made sure to make both copies of spear.h more or less identical so we can eventually combine them. The spear3?0.h files were only used by the spear3?0.c files, so I merged the contents in there and removed the bits that were unused. This is something that should still be looked at. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@st.com>
2012-04-11 17:30:11 +00:00
.length = 2 * SZ_16M,
ARM: 6015/1: ST SPEAr: Added source files for SPEAr6xx machine family Reviewed-by: Linus Walleij <linux.walleij@stericsson.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-01 12:31:01 +01:00
.type = MT_DEVICE
ARM: spear: remove most mach/*.h header contents The register and irq definitions in mach/*.h for spear3xx and spear6xx are now mostly obsolete, after the platforms have been converted to device tree based probing and the data is now part of the device tree files. The misc_regs.h contents are moved into clock.c because that is the only user, aside from the DMA_CHN_CFG that should eventually get handled differently. Some of the contents of mach/spear.h still remain, because they are used to set up the static map table, timer, uart and auxdata tables, but almost everything got removed. We might remove everything but the map table as the DT conversion completes, but that is not a priority. I've also made sure to make both copies of spear.h more or less identical so we can eventually combine them. The spear3?0.h files were only used by the spear3?0.c files, so I merged the contents in there and removed the bits that were unused. This is something that should still be looked at. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@st.com>
2012-04-11 17:30:11 +00:00
}, {
ARM: spear: make clock driver independent of headers Device drivers should not access MMIO registers through hardcoded platform specific address constants. Instead, we can pass the MMIO token to the spear clock driver in the initialization routine to contain that knowledge in the platform code itself. Ideally, the clock driver would use of_iomap() or similar to get the address, and that can be used later, but for now, this is the minimal change. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-12-02 17:59:57 +01:00
.virtual = (unsigned long)VA_SPEAR_ICM1_2_BASE,
ARM: spear: make spear3xx/6xx mach/spear.h files identical The two files are almost identical already basically just differ in the identifier names. By changing the identifiers to be the same, we are able to merge the two as a preparation to building a combined kernel. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-12-02 14:45:27 +01:00
.pfn = __phys_to_pfn(SPEAR_ICM1_2_BASE),
ARM: spear: remove most mach/*.h header contents The register and irq definitions in mach/*.h for spear3xx and spear6xx are now mostly obsolete, after the platforms have been converted to device tree based probing and the data is now part of the device tree files. The misc_regs.h contents are moved into clock.c because that is the only user, aside from the DMA_CHN_CFG that should eventually get handled differently. Some of the contents of mach/spear.h still remain, because they are used to set up the static map table, timer, uart and auxdata tables, but almost everything got removed. We might remove everything but the map table as the DT conversion completes, but that is not a priority. I've also made sure to make both copies of spear.h more or less identical so we can eventually combine them. The spear3?0.h files were only used by the spear3?0.c files, so I merged the contents in there and removed the bits that were unused. This is something that should still be looked at. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@st.com>
2012-04-11 17:30:11 +00:00
.length = SZ_16M,
ARM: 6015/1: ST SPEAr: Added source files for SPEAr6xx machine family Reviewed-by: Linus Walleij <linux.walleij@stericsson.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-01 12:31:01 +01:00
.type = MT_DEVICE
}, {
ARM: spear: make clock driver independent of headers Device drivers should not access MMIO registers through hardcoded platform specific address constants. Instead, we can pass the MMIO token to the spear clock driver in the initialization routine to contain that knowledge in the platform code itself. Ideally, the clock driver would use of_iomap() or similar to get the address, and that can be used later, but for now, this is the minimal change. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-12-02 17:59:57 +01:00
.virtual = (unsigned long)VA_SPEAR_ICM3_SMI_CTRL_BASE,
ARM: spear: make spear3xx/6xx mach/spear.h files identical The two files are almost identical already basically just differ in the identifier names. By changing the identifiers to be the same, we are able to merge the two as a preparation to building a combined kernel. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-12-02 14:45:27 +01:00
.pfn = __phys_to_pfn(SPEAR_ICM3_SMI_CTRL_BASE),
ARM: spear: remove most mach/*.h header contents The register and irq definitions in mach/*.h for spear3xx and spear6xx are now mostly obsolete, after the platforms have been converted to device tree based probing and the data is now part of the device tree files. The misc_regs.h contents are moved into clock.c because that is the only user, aside from the DMA_CHN_CFG that should eventually get handled differently. Some of the contents of mach/spear.h still remain, because they are used to set up the static map table, timer, uart and auxdata tables, but almost everything got removed. We might remove everything but the map table as the DT conversion completes, but that is not a priority. I've also made sure to make both copies of spear.h more or less identical so we can eventually combine them. The spear3?0.h files were only used by the spear3?0.c files, so I merged the contents in there and removed the bits that were unused. This is something that should still be looked at. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@st.com>
2012-04-11 17:30:11 +00:00
.length = SZ_16M,
ARM: 6015/1: ST SPEAr: Added source files for SPEAr6xx machine family Reviewed-by: Linus Walleij <linux.walleij@stericsson.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-01 12:31:01 +01:00
.type = MT_DEVICE
},
};
/* This will create static memory mapping for selected devices */
void __init spear6xx_map_io(void)
{
iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc));
}
ARM: 6737/1: SPEAr: formalized timer support Move platform specific timer initialization code is moved into platform specific files. Reviewed-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-16 07:40:32 +01:00
ARM: delete struct sys_timer Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-08 12:40:59 -07:00
void __init spear6xx_timer_init(void)
ARM: 6737/1: SPEAr: formalized timer support Move platform specific timer initialization code is moved into platform specific files. Reviewed-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-16 07:40:32 +01:00
{
Clk:spear6xx:Fix: Rename clk ids within predefined limit The max limit of con_id is 16 and dev_id is 20. As of now for spear6xx, many clk ids are exceeding this predefined limit. This patch is intended to rename clk ids like: mux_clk -> _mclk gate_clk -> _gclk synth_clk -> syn_clk ras_gen1_synth_gate_clk -> ras_syn1_gclk pll3_48m -> pll3_ Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-07-10 17:12:46 +05:30
char pclk_name[] = "pll3_clk";
ARM: 6737/1: SPEAr: formalized timer support Move platform specific timer initialization code is moved into platform specific files. Reviewed-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-16 07:40:32 +01:00
struct clk *gpt_clk, *pclk;
ARM: spear: make clock driver independent of headers Device drivers should not access MMIO registers through hardcoded platform specific address constants. Instead, we can pass the MMIO token to the spear clock driver in the initialization routine to contain that knowledge in the platform code itself. Ideally, the clock driver would use of_iomap() or similar to get the address, and that can be used later, but for now, this is the minimal change. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-12-02 17:59:57 +01:00
spear6xx_clk_init(MISC_BASE);
SPEAr: Switch to common clock framework SPEAr SoCs used its own clock framework since now. From now on they will move to use common clock framework. This patch updates existing SPEAr machine support to adapt for common clock framework. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Reviewed-by: Mike Turquette <mturquette@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-10 09:02:35 +05:30
ARM: 6737/1: SPEAr: formalized timer support Move platform specific timer initialization code is moved into platform specific files. Reviewed-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-16 07:40:32 +01:00
/* get the system timer clock */
gpt_clk = clk_get_sys("gpt0", NULL);
if (IS_ERR(gpt_clk)) {
pr_err("%s:couldn't get clk for gpt\n", __func__);
BUG();
}
/* get the suitable parent clock for timer*/
pclk = clk_get(NULL, pclk_name);
if (IS_ERR(pclk)) {
pr_err("%s:couldn't get %s as parent for gpt\n",
__func__, pclk_name);
BUG();
}
clk_set_parent(gpt_clk, pclk);
clk_put(gpt_clk);
clk_put(pclk);
SPEAr: Add DT bindings for SPEAr's timer All SPEAr SoC's use ST's Timer module. This patch adds device tree probing capability for that. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-04-21 13:15:37 +05:30
spear_setup_of_timer();
ARM: 6737/1: SPEAr: formalized timer support Move platform specific timer initialization code is moved into platform specific files. Reviewed-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-16 07:40:32 +01:00
}
SPEAr: Add PL080 DMA support for 3xx and 6xx Both SPEAr3xx and SPEAr6xx families have one instance of ARM PL080 DMA controller. This patch adds in support for that. Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
2012-03-26 10:29:23 +05:30
/* Add auxdata to pass platform data */
struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = {
ARM: spear: make spear3xx/6xx mach/spear.h files identical The two files are almost identical already basically just differ in the identifier names. By changing the identifiers to be the same, we are able to merge the two as a preparation to building a combined kernel. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-12-02 14:45:27 +01:00
OF_DEV_AUXDATA("arm,pl080", SPEAR_ICM3_DMA_BASE, NULL,
ARM: spear: rename duplicate pl080_plat_data Both spear3xx and spear6xx have a global symbol named pl080_plat_data. Eventually, both should be removed, but for now, we can rename one to pl080_plat_data and declare it static, since that one does not actually need to be visible outside of spear6xx.c. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-12-06 14:48:28 +01:00
&spear6xx_pl080_plat_data),
SPEAr: Add PL080 DMA support for 3xx and 6xx Both SPEAr3xx and SPEAr6xx families have one instance of ARM PL080 DMA controller. This patch adds in support for that. Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
2012-03-26 10:29:23 +05:30
{}
};
ARM: SPEAr600: Add device-tree support to SPEAr600 boards This patch adds a generic target for SPEAr600 board that can be configured via the device-tree. Currently the following devices are supported via the devicetree: - VIC interrupts - PL011 UART - PL061 GPIO - Synopsys DW I2C - Synopsys DW ethernet Other peripheral devices (e.g. SMI flash, FSMC NAND flash etc) will follow in later patches. Only the spear600-evb is currently supported. Other SPEAr600 based boards will follow later. Since the current mainline SPEAr600 code only supports the SPEAr600 evaluation board, with nearly zero peripheral devices (only UART and GPIO), it makes sense to switch over to DT based configuration completely now. So this patch also removes all non-DT stuff, mainly platform device data. The files spear600.c and spear600_evb.c are removed completely. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 14:03:23 +01:00
static void __init spear600_dt_init(void)
{
SPEAr: Add PL080 DMA support for 3xx and 6xx Both SPEAr3xx and SPEAr6xx families have one instance of ARM PL080 DMA controller. This patch adds in support for that. Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
2012-03-26 10:29:23 +05:30
of_platform_populate(NULL, of_default_bus_match_table,
spear6xx_auxdata_lookup, NULL);
ARM: SPEAr600: Add device-tree support to SPEAr600 boards This patch adds a generic target for SPEAr600 board that can be configured via the device-tree. Currently the following devices are supported via the devicetree: - VIC interrupts - PL011 UART - PL061 GPIO - Synopsys DW I2C - Synopsys DW ethernet Other peripheral devices (e.g. SMI flash, FSMC NAND flash etc) will follow in later patches. Only the spear600-evb is currently supported. Other SPEAr600 based boards will follow later. Since the current mainline SPEAr600 code only supports the SPEAr600 evaluation board, with nearly zero peripheral devices (only UART and GPIO), it makes sense to switch over to DT based configuration completely now. So this patch also removes all non-DT stuff, mainly platform device data. The files spear600.c and spear600_evb.c are removed completely. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 14:03:23 +01:00
}
static const char *spear600_dt_board_compat[] = {
"st,spear600",
NULL
};
DT_MACHINE_START(SPEAR600_DT, "ST SPEAr600 (Flattened Device Tree)")
.map_io = spear6xx_map_io,
ARM: delete struct sys_timer Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-08 12:40:59 -07:00
.init_time = spear6xx_timer_init,
ARM: SPEAr600: Add device-tree support to SPEAr600 boards This patch adds a generic target for SPEAr600 board that can be configured via the device-tree. Currently the following devices are supported via the devicetree: - VIC interrupts - PL011 UART - PL061 GPIO - Synopsys DW I2C - Synopsys DW ethernet Other peripheral devices (e.g. SMI flash, FSMC NAND flash etc) will follow in later patches. Only the spear600-evb is currently supported. Other SPEAr600 based boards will follow later. Since the current mainline SPEAr600 code only supports the SPEAr600 evaluation board, with nearly zero peripheral devices (only UART and GPIO), it makes sense to switch over to DT based configuration completely now. So this patch also removes all non-DT stuff, mainly platform device data. The files spear600.c and spear600_evb.c are removed completely. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 14:03:23 +01:00
.init_machine = spear600_dt_init,
.restart = spear_restart,
.dt_compat = spear600_dt_board_compat,
MACHINE_END
Reference in a new issue Copy permalink