forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
linux-pinenote/arch/arm64/kvm/sys_regs.c

1529 lines
43 KiB
C
Raw Normal View History

arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/*
* Copyright (C) 2012,2013 - ARM Ltd
* Author: Marc Zyngier <marc.zyngier@arm.com>
*
* Derived from arch/arm/kvm/coproc.c:
* Copyright (C) 2012 - Virtual Open Systems and Columbia University
* Authors: Rusty Russell <rusty@rustcorp.com.au>
* Christoffer Dall <c.dall@virtualopensystems.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/mm.h>
#include <linux/kvm_host.h>
#include <linux/uaccess.h>
#include <asm/kvm_arm.h>
#include <asm/kvm_host.h>
#include <asm/kvm_emulate.h>
#include <asm/kvm_coproc.h>
arm64: KVM: flush VM pages before letting the guest enable caches When the guest runs with caches disabled (like in an early boot sequence, for example), all the writes are diectly going to RAM, bypassing the caches altogether. Once the MMU and caches are enabled, whatever sits in the cache becomes suddenly visible, which isn't what the guest expects. A way to avoid this potential disaster is to invalidate the cache when the MMU is being turned on. For this, we hook into the SCTLR_EL1 trapping code, and scan the stage-2 page tables, invalidating the pages/sections that have already been mapped in. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-15 12:50:23 +00:00
#include <asm/kvm_mmu.h>
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
#include <asm/cacheflush.h>
#include <asm/cputype.h>
arm64: KVM: add trap handlers for AArch64 debug registers Add handlers for all the AArch64 debug registers that are accessible from EL0 or EL1. The trapping code keeps track of the state of the debug registers, allowing for the switch code to implement a lazy switching strategy. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:24:46 +01:00
#include <asm/debug-monitors.h>
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
#include <trace/events/kvm.h>
#include "sys_regs.h"
/*
* All of this file is extremly similar to the ARM coproc.c, but the
* types are different. My gut feeling is that it should be pretty
* easy to merge, but that would be an ABI breakage -- again. VFP
* would also need to be abstracted.
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
*
* For AArch32, we only take care of what is being trapped. Anything
* that has to do with init and userspace access has to go via the
* 64bit interface.
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
*/
/* 3 bits per cache level, as per CLIDR, but non-existent caches always 0 */
static u32 cache_levels;
/* CSSELR values; used to index KVM_REG_ARM_DEMUX_ID_CCSIDR */
#define CSSELR_MAX 12
/* Which cache CCSIDR represents depends on CSSELR value. */
static u32 get_ccsidr(u32 csselr)
{
u32 ccsidr;
/* Make sure noone else changes CSSELR during this! */
local_irq_disable();
/* Put value into CSSELR */
asm volatile("msr csselr_el1, %x0" : : "r" (csselr));
isb();
/* Read result out of CCSIDR */
asm volatile("mrs %0, ccsidr_el1" : "=r" (ccsidr));
local_irq_enable();
return ccsidr;
}
static void do_dc_cisw(u32 val)
{
asm volatile("dc cisw, %x0" : : "r" (val));
arm64: barriers: make use of barrier options with explicit barriers When calling our low-level barrier macros directly, we can often suffice with more relaxed behaviour than the default "all accesses, full system" option. This patch updates the users of dsb() to specify the option which they actually require. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-02 16:24:10 +01:00
dsb(ish);
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
}
static void do_dc_csw(u32 val)
{
asm volatile("dc csw, %x0" : : "r" (val));
arm64: barriers: make use of barrier options with explicit barriers When calling our low-level barrier macros directly, we can often suffice with more relaxed behaviour than the default "all accesses, full system" option. This patch updates the users of dsb() to specify the option which they actually require. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-02 16:24:10 +01:00
dsb(ish);
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
}
/* See note at ARM ARM B1.14.4 */
static bool access_dcsw(struct kvm_vcpu *vcpu,
const struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
unsigned long val;
int cpu;
if (!p->is_write)
return read_from_write_only(vcpu, p);
cpu = get_cpu();
cpumask_setall(&vcpu->arch.require_dcache_flush);
cpumask_clear_cpu(cpu, &vcpu->arch.require_dcache_flush);
/* If we were already preempted, take the long way around */
if (cpu != vcpu->arch.last_pcpu) {
flush_cache_all();
goto done;
}
val = *vcpu_reg(vcpu, p->Rt);
switch (p->CRm) {
case 6: /* Upgrade DCISW to DCCISW, as per HCR.SWIO */
case 14: /* DCCISW */
do_dc_cisw(val);
break;
case 10: /* DCCSW */
do_dc_csw(val);
break;
}
done:
put_cpu();
return true;
}
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-14 18:00:55 +00:00
/*
* Generic accessor for VM registers. Only called as long as HCR_TVM
* is set.
*/
static bool access_vm_reg(struct kvm_vcpu *vcpu,
const struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
unsigned long val;
BUG_ON(!p->is_write);
val = *vcpu_reg(vcpu, p->Rt);
arm64: KVM: fix 64bit CP15 VM access for 32bit guests Commit f0a3eaff71b8 (ARM64: KVM: fix big endian issue in access_vm_reg for 32bit guest) changed the way we handle CP15 VM accesses, so that all 64bit accesses are done via vcpu_sys_reg. This looks like a good idea as it solves indianness issues in an elegant way, except for one small detail: the register index is doesn't refer to the same array! We end up corrupting some random data structure instead. Fix this by reverting to the original code, except for the introduction of a vcpu_cp15_64_high macro that deals with the endianness thing. Tested on Juno with 32bit SMP guests. Cc: Victor Kamensky <victor.kamensky@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-08-01 12:00:36 +01:00
if (!p->is_aarch32) {
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-14 18:00:55 +00:00
vcpu_sys_reg(vcpu, r->reg) = val;
arm64: KVM: fix 64bit CP15 VM access for 32bit guests Commit f0a3eaff71b8 (ARM64: KVM: fix big endian issue in access_vm_reg for 32bit guest) changed the way we handle CP15 VM accesses, so that all 64bit accesses are done via vcpu_sys_reg. This looks like a good idea as it solves indianness issues in an elegant way, except for one small detail: the register index is doesn't refer to the same array! We end up corrupting some random data structure instead. Fix this by reverting to the original code, except for the introduction of a vcpu_cp15_64_high macro that deals with the endianness thing. Tested on Juno with 32bit SMP guests. Cc: Victor Kamensky <victor.kamensky@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-08-01 12:00:36 +01:00
} else {
if (!p->is_32bit)
vcpu_cp15_64_high(vcpu, r->reg) = val >> 32;
ARM64: KVM: fix big endian issue in access_vm_reg for 32bit guest Fix issue with 32bit guests running on top of BE KVM host. Indexes of high and low words of 64bit cp15 register are swapped in case of big endian code, since 64bit cp15 state is restored or saved with double word write or read instruction. Define helper macro to access low words of 64bit cp15 register. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-02 17:19:30 +01:00
vcpu_cp15_64_low(vcpu, r->reg) = val & 0xffffffffUL;
arm64: KVM: fix 64bit CP15 VM access for 32bit guests Commit f0a3eaff71b8 (ARM64: KVM: fix big endian issue in access_vm_reg for 32bit guest) changed the way we handle CP15 VM accesses, so that all 64bit accesses are done via vcpu_sys_reg. This looks like a good idea as it solves indianness issues in an elegant way, except for one small detail: the register index is doesn't refer to the same array! We end up corrupting some random data structure instead. Fix this by reverting to the original code, except for the introduction of a vcpu_cp15_64_high macro that deals with the endianness thing. Tested on Juno with 32bit SMP guests. Cc: Victor Kamensky <victor.kamensky@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-08-01 12:00:36 +01:00
}
ARM64: KVM: fix big endian issue in access_vm_reg for 32bit guest Fix issue with 32bit guests running on top of BE KVM host. Indexes of high and low words of 64bit cp15 register are swapped in case of big endian code, since 64bit cp15 state is restored or saved with double word write or read instruction. Define helper macro to access low words of 64bit cp15 register. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-02 17:19:30 +01:00
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-14 18:00:55 +00:00
return true;
}
/*
* SCTLR_EL1 accessor. Only called as long as HCR_TVM is set. If the
* guest enables the MMU, we stop trapping the VM sys_regs and leave
* it in complete control of the caches.
*/
static bool access_sctlr(struct kvm_vcpu *vcpu,
const struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
access_vm_reg(vcpu, p, r);
arm64: KVM: flush VM pages before letting the guest enable caches When the guest runs with caches disabled (like in an early boot sequence, for example), all the writes are diectly going to RAM, bypassing the caches altogether. Once the MMU and caches are enabled, whatever sits in the cache becomes suddenly visible, which isn't what the guest expects. A way to avoid this potential disaster is to invalidate the cache when the MMU is being turned on. For this, we hook into the SCTLR_EL1 trapping code, and scan the stage-2 page tables, invalidating the pages/sections that have already been mapped in. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-15 12:50:23 +00:00
if (vcpu_has_cache_enabled(vcpu)) { /* MMU+Caches enabled? */
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-14 18:00:55 +00:00
vcpu->arch.hcr_el2 &= ~HCR_TVM;
arm64: KVM: flush VM pages before letting the guest enable caches When the guest runs with caches disabled (like in an early boot sequence, for example), all the writes are diectly going to RAM, bypassing the caches altogether. Once the MMU and caches are enabled, whatever sits in the cache becomes suddenly visible, which isn't what the guest expects. A way to avoid this potential disaster is to invalidate the cache when the MMU is being turned on. For this, we hook into the SCTLR_EL1 trapping code, and scan the stage-2 page tables, invalidating the pages/sections that have already been mapped in. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-15 12:50:23 +00:00
stage2_flush_vm(vcpu->kvm);
}
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-14 18:00:55 +00:00
return true;
}
arm64: KVM: rename pm_fake handler to trap_raz_wi pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:21:16 +01:00
static bool trap_raz_wi(struct kvm_vcpu *vcpu,
const struct sys_reg_params *p,
const struct sys_reg_desc *r)
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
{
if (p->is_write)
return ignore_write(vcpu, p);
else
return read_zero(vcpu, p);
}
arm64: KVM: add trap handlers for AArch64 debug registers Add handlers for all the AArch64 debug registers that are accessible from EL0 or EL1. The trapping code keeps track of the state of the debug registers, allowing for the switch code to implement a lazy switching strategy. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:24:46 +01:00
static bool trap_oslsr_el1(struct kvm_vcpu *vcpu,
const struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
if (p->is_write) {
return ignore_write(vcpu, p);
} else {
*vcpu_reg(vcpu, p->Rt) = (1 << 3);
return true;
}
}
static bool trap_dbgauthstatus_el1(struct kvm_vcpu *vcpu,
const struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
if (p->is_write) {
return ignore_write(vcpu, p);
} else {
u32 val;
asm volatile("mrs %0, dbgauthstatus_el1" : "=r" (val));
*vcpu_reg(vcpu, p->Rt) = val;
return true;
}
}
/*
* We want to avoid world-switching all the DBG registers all the
* time:
*
* - If we've touched any debug register, it is likely that we're
* going to touch more of them. It then makes sense to disable the
* traps and start doing the save/restore dance
* - If debug is active (DBG_MDSCR_KDE or DBG_MDSCR_MDE set), it is
* then mandatory to save/restore the registers, as the guest
* depends on them.
*
* For this, we use a DIRTY bit, indicating the guest has modified the
* debug registers, used as follow:
*
* On guest entry:
* - If the dirty bit is set (because we're coming back from trapping),
* disable the traps, save host registers, restore guest registers.
* - If debug is actively in use (DBG_MDSCR_KDE or DBG_MDSCR_MDE set),
* set the dirty bit, disable the traps, save host registers,
* restore guest registers.
* - Otherwise, enable the traps
*
* On guest exit:
* - If the dirty bit is set, save guest registers, restore host
* registers and clear the dirty bit. This ensure that the host can
* now use the debug registers.
*/
static bool trap_debug_regs(struct kvm_vcpu *vcpu,
const struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
if (p->is_write) {
vcpu_sys_reg(vcpu, r->reg) = *vcpu_reg(vcpu, p->Rt);
vcpu->arch.debug_flags |= KVM_ARM64_DEBUG_DIRTY;
} else {
*vcpu_reg(vcpu, p->Rt) = vcpu_sys_reg(vcpu, r->reg);
}
return true;
}
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
static void reset_amair_el1(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
{
u64 amair;
asm volatile("mrs %0, amair_el1\n" : "=r" (amair));
vcpu_sys_reg(vcpu, AMAIR_EL1) = amair;
}
static void reset_mpidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
{
/*
* Simply map the vcpu_id into the Aff0 field of the MPIDR.
*/
vcpu_sys_reg(vcpu, MPIDR_EL1) = (1UL << 31) | (vcpu->vcpu_id & 0xff);
}
arm64: KVM: add trap handlers for AArch64 debug registers Add handlers for all the AArch64 debug registers that are accessible from EL0 or EL1. The trapping code keeps track of the state of the debug registers, allowing for the switch code to implement a lazy switching strategy. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:24:46 +01:00
/* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */
#define DBG_BCR_BVR_WCR_WVR_EL1(n) \
/* DBGBVRn_EL1 */ \
{ Op0(0b10), Op1(0b000), CRn(0b0000), CRm((n)), Op2(0b100), \
trap_debug_regs, reset_val, (DBGBVR0_EL1 + (n)), 0 }, \
/* DBGBCRn_EL1 */ \
{ Op0(0b10), Op1(0b000), CRn(0b0000), CRm((n)), Op2(0b101), \
trap_debug_regs, reset_val, (DBGBCR0_EL1 + (n)), 0 }, \
/* DBGWVRn_EL1 */ \
{ Op0(0b10), Op1(0b000), CRn(0b0000), CRm((n)), Op2(0b110), \
trap_debug_regs, reset_val, (DBGWVR0_EL1 + (n)), 0 }, \
/* DBGWCRn_EL1 */ \
{ Op0(0b10), Op1(0b000), CRn(0b0000), CRm((n)), Op2(0b111), \
trap_debug_regs, reset_val, (DBGWCR0_EL1 + (n)), 0 }
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/*
* Architected system registers.
* Important: Must be sorted ascending by Op0, Op1, CRn, CRm, Op2
arm64: KVM: rename pm_fake handler to trap_raz_wi pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:21:16 +01:00
*
* We could trap ID_DFR0 and tell the guest we don't support performance
* monitoring. Unfortunately the patch to make the kernel check ID_DFR0 was
* NAKed, so it will read the PMCR anyway.
*
* Therefore we tell the guest we have 0 counters. Unfortunately, we
* must always support PMCCNTR (the cycle counter): we just RAZ/WI for
* all PM registers, which doesn't crash the guest kernel at least.
*
arm64: KVM: add trap handlers for AArch64 debug registers Add handlers for all the AArch64 debug registers that are accessible from EL0 or EL1. The trapping code keeps track of the state of the debug registers, allowing for the switch code to implement a lazy switching strategy. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:24:46 +01:00
* Debug handling: We do trap most, if not all debug related system
* registers. The implementation is good enough to ensure that a guest
* can use these with minimal performance degradation. The drawback is
* that we don't implement any of the external debug, none of the
* OSlock protocol. This should be revisited if we ever encounter a
* more demanding guest...
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
*/
static const struct sys_reg_desc sys_reg_descs[] = {
/* DC ISW */
{ Op0(0b01), Op1(0b000), CRn(0b0111), CRm(0b0110), Op2(0b010),
access_dcsw },
/* DC CSW */
{ Op0(0b01), Op1(0b000), CRn(0b0111), CRm(0b1010), Op2(0b010),
access_dcsw },
/* DC CISW */
{ Op0(0b01), Op1(0b000), CRn(0b0111), CRm(0b1110), Op2(0b010),
access_dcsw },
arm64: KVM: add trap handlers for AArch64 debug registers Add handlers for all the AArch64 debug registers that are accessible from EL0 or EL1. The trapping code keeps track of the state of the debug registers, allowing for the switch code to implement a lazy switching strategy. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:24:46 +01:00
DBG_BCR_BVR_WCR_WVR_EL1(0),
DBG_BCR_BVR_WCR_WVR_EL1(1),
/* MDCCINT_EL1 */
{ Op0(0b10), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b000),
trap_debug_regs, reset_val, MDCCINT_EL1, 0 },
/* MDSCR_EL1 */
{ Op0(0b10), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b010),
trap_debug_regs, reset_val, MDSCR_EL1, 0 },
DBG_BCR_BVR_WCR_WVR_EL1(2),
DBG_BCR_BVR_WCR_WVR_EL1(3),
DBG_BCR_BVR_WCR_WVR_EL1(4),
DBG_BCR_BVR_WCR_WVR_EL1(5),
DBG_BCR_BVR_WCR_WVR_EL1(6),
DBG_BCR_BVR_WCR_WVR_EL1(7),
DBG_BCR_BVR_WCR_WVR_EL1(8),
DBG_BCR_BVR_WCR_WVR_EL1(9),
DBG_BCR_BVR_WCR_WVR_EL1(10),
DBG_BCR_BVR_WCR_WVR_EL1(11),
DBG_BCR_BVR_WCR_WVR_EL1(12),
DBG_BCR_BVR_WCR_WVR_EL1(13),
DBG_BCR_BVR_WCR_WVR_EL1(14),
DBG_BCR_BVR_WCR_WVR_EL1(15),
/* MDRAR_EL1 */
{ Op0(0b10), Op1(0b000), CRn(0b0001), CRm(0b0000), Op2(0b000),
trap_raz_wi },
/* OSLAR_EL1 */
{ Op0(0b10), Op1(0b000), CRn(0b0001), CRm(0b0000), Op2(0b100),
trap_raz_wi },
/* OSLSR_EL1 */
{ Op0(0b10), Op1(0b000), CRn(0b0001), CRm(0b0001), Op2(0b100),
trap_oslsr_el1 },
/* OSDLR_EL1 */
{ Op0(0b10), Op1(0b000), CRn(0b0001), CRm(0b0011), Op2(0b100),
trap_raz_wi },
/* DBGPRCR_EL1 */
{ Op0(0b10), Op1(0b000), CRn(0b0001), CRm(0b0100), Op2(0b100),
trap_raz_wi },
/* DBGCLAIMSET_EL1 */
{ Op0(0b10), Op1(0b000), CRn(0b0111), CRm(0b1000), Op2(0b110),
trap_raz_wi },
/* DBGCLAIMCLR_EL1 */
{ Op0(0b10), Op1(0b000), CRn(0b0111), CRm(0b1001), Op2(0b110),
trap_raz_wi },
/* DBGAUTHSTATUS_EL1 */
{ Op0(0b10), Op1(0b000), CRn(0b0111), CRm(0b1110), Op2(0b110),
trap_dbgauthstatus_el1 },
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
/* TEECR32_EL1 */
{ Op0(0b10), Op1(0b010), CRn(0b0000), CRm(0b0000), Op2(0b000),
NULL, reset_val, TEECR32_EL1, 0 },
/* TEEHBR32_EL1 */
{ Op0(0b10), Op1(0b010), CRn(0b0001), CRm(0b0000), Op2(0b000),
NULL, reset_val, TEEHBR32_EL1, 0 },
arm64: KVM: add trap handlers for AArch64 debug registers Add handlers for all the AArch64 debug registers that are accessible from EL0 or EL1. The trapping code keeps track of the state of the debug registers, allowing for the switch code to implement a lazy switching strategy. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:24:46 +01:00
/* MDCCSR_EL1 */
{ Op0(0b10), Op1(0b011), CRn(0b0000), CRm(0b0001), Op2(0b000),
trap_raz_wi },
/* DBGDTR_EL0 */
{ Op0(0b10), Op1(0b011), CRn(0b0000), CRm(0b0100), Op2(0b000),
trap_raz_wi },
/* DBGDTR[TR]X_EL0 */
{ Op0(0b10), Op1(0b011), CRn(0b0000), CRm(0b0101), Op2(0b000),
trap_raz_wi },
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
/* DBGVCR32_EL2 */
{ Op0(0b10), Op1(0b100), CRn(0b0000), CRm(0b0111), Op2(0b000),
NULL, reset_val, DBGVCR32_EL2, 0 },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* MPIDR_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0000), Op2(0b101),
NULL, reset_mpidr, MPIDR_EL1 },
/* SCTLR_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b0001), CRm(0b0000), Op2(0b000),
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-14 18:00:55 +00:00
access_sctlr, reset_val, SCTLR_EL1, 0x00C50078 },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* CPACR_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b0001), CRm(0b0000), Op2(0b010),
NULL, reset_val, CPACR_EL1, 0 },
/* TTBR0_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b0010), CRm(0b0000), Op2(0b000),
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-14 18:00:55 +00:00
access_vm_reg, reset_unknown, TTBR0_EL1 },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* TTBR1_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b0010), CRm(0b0000), Op2(0b001),
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-14 18:00:55 +00:00
access_vm_reg, reset_unknown, TTBR1_EL1 },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* TCR_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b0010), CRm(0b0000), Op2(0b010),
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-14 18:00:55 +00:00
access_vm_reg, reset_val, TCR_EL1, 0 },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* AFSR0_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b0101), CRm(0b0001), Op2(0b000),
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-14 18:00:55 +00:00
access_vm_reg, reset_unknown, AFSR0_EL1 },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* AFSR1_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b0101), CRm(0b0001), Op2(0b001),
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-14 18:00:55 +00:00
access_vm_reg, reset_unknown, AFSR1_EL1 },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* ESR_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b0101), CRm(0b0010), Op2(0b000),
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-14 18:00:55 +00:00
access_vm_reg, reset_unknown, ESR_EL1 },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* FAR_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b0110), CRm(0b0000), Op2(0b000),
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-14 18:00:55 +00:00
access_vm_reg, reset_unknown, FAR_EL1 },
arm64: KVM: perform save/restore of PAR_EL1 Not saving PAR_EL1 is an unfortunate oversight. If the guest performs an AT* operation and gets scheduled out before reading the result of the translation from PAREL1, it could become corrupted by another guest or the host. Saving this register is made slightly more complicated as KVM also uses it on the permission fault handling path, leading to an ugly "stash and restore" sequence. Fortunately, this is already a slow path so we don't really care. Also, Linux doesn't do any AT* operation, so Linux guests are not impacted by this bug. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-07 11:02:34 +01:00
/* PAR_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b0111), CRm(0b0100), Op2(0b000),
NULL, reset_unknown, PAR_EL1 },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* PMINTENSET_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b1001), CRm(0b1110), Op2(0b001),
arm64: KVM: rename pm_fake handler to trap_raz_wi pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:21:16 +01:00
trap_raz_wi },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* PMINTENCLR_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b1001), CRm(0b1110), Op2(0b010),
arm64: KVM: rename pm_fake handler to trap_raz_wi pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:21:16 +01:00
trap_raz_wi },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* MAIR_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b1010), CRm(0b0010), Op2(0b000),
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-14 18:00:55 +00:00
access_vm_reg, reset_unknown, MAIR_EL1 },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* AMAIR_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b1010), CRm(0b0011), Op2(0b000),
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-14 18:00:55 +00:00
access_vm_reg, reset_amair_el1, AMAIR_EL1 },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* VBAR_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b1100), CRm(0b0000), Op2(0b000),
NULL, reset_val, VBAR_EL1, 0 },
/* CONTEXTIDR_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b1101), CRm(0b0000), Op2(0b001),
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-14 18:00:55 +00:00
access_vm_reg, reset_val, CONTEXTIDR_EL1, 0 },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* TPIDR_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b1101), CRm(0b0000), Op2(0b100),
NULL, reset_unknown, TPIDR_EL1 },
/* CNTKCTL_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b1110), CRm(0b0001), Op2(0b000),
NULL, reset_val, CNTKCTL_EL1, 0},
/* CSSELR_EL1 */
{ Op0(0b11), Op1(0b010), CRn(0b0000), CRm(0b0000), Op2(0b000),
NULL, reset_unknown, CSSELR_EL1 },
/* PMCR_EL0 */
{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b000),
arm64: KVM: rename pm_fake handler to trap_raz_wi pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:21:16 +01:00
trap_raz_wi },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* PMCNTENSET_EL0 */
{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b001),
arm64: KVM: rename pm_fake handler to trap_raz_wi pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:21:16 +01:00
trap_raz_wi },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* PMCNTENCLR_EL0 */
{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b010),
arm64: KVM: rename pm_fake handler to trap_raz_wi pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:21:16 +01:00
trap_raz_wi },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* PMOVSCLR_EL0 */
{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b011),
arm64: KVM: rename pm_fake handler to trap_raz_wi pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:21:16 +01:00
trap_raz_wi },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* PMSWINC_EL0 */
{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b100),
arm64: KVM: rename pm_fake handler to trap_raz_wi pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:21:16 +01:00
trap_raz_wi },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* PMSELR_EL0 */
{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b101),
arm64: KVM: rename pm_fake handler to trap_raz_wi pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:21:16 +01:00
trap_raz_wi },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* PMCEID0_EL0 */
{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b110),
arm64: KVM: rename pm_fake handler to trap_raz_wi pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:21:16 +01:00
trap_raz_wi },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* PMCEID1_EL0 */
{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b111),
arm64: KVM: rename pm_fake handler to trap_raz_wi pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:21:16 +01:00
trap_raz_wi },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* PMCCNTR_EL0 */
{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1101), Op2(0b000),
arm64: KVM: rename pm_fake handler to trap_raz_wi pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:21:16 +01:00
trap_raz_wi },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* PMXEVTYPER_EL0 */
{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1101), Op2(0b001),
arm64: KVM: rename pm_fake handler to trap_raz_wi pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:21:16 +01:00
trap_raz_wi },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* PMXEVCNTR_EL0 */
{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1101), Op2(0b010),
arm64: KVM: rename pm_fake handler to trap_raz_wi pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:21:16 +01:00
trap_raz_wi },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* PMUSERENR_EL0 */
{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1110), Op2(0b000),
arm64: KVM: rename pm_fake handler to trap_raz_wi pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:21:16 +01:00
trap_raz_wi },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* PMOVSSET_EL0 */
{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1110), Op2(0b011),
arm64: KVM: rename pm_fake handler to trap_raz_wi pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:21:16 +01:00
trap_raz_wi },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* TPIDR_EL0 */
{ Op0(0b11), Op1(0b011), CRn(0b1101), CRm(0b0000), Op2(0b010),
NULL, reset_unknown, TPIDR_EL0 },
/* TPIDRRO_EL0 */
{ Op0(0b11), Op1(0b011), CRn(0b1101), CRm(0b0000), Op2(0b011),
NULL, reset_unknown, TPIDRRO_EL0 },
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
/* DACR32_EL2 */
{ Op0(0b11), Op1(0b100), CRn(0b0011), CRm(0b0000), Op2(0b000),
NULL, reset_unknown, DACR32_EL2 },
/* IFSR32_EL2 */
{ Op0(0b11), Op1(0b100), CRn(0b0101), CRm(0b0000), Op2(0b001),
NULL, reset_unknown, IFSR32_EL2 },
/* FPEXC32_EL2 */
{ Op0(0b11), Op1(0b100), CRn(0b0101), CRm(0b0011), Op2(0b000),
NULL, reset_val, FPEXC32_EL2, 0x70 },
};
arm64: KVM: add trap handlers for AArch32 debug registers Add handlers for all the AArch32 debug registers that are accessible from EL0 or EL1. The code follow the same strategy as the AArch64 counterpart with regards to tracking the dirty state of the debug registers. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:31:37 +01:00
static bool trap_dbgidr(struct kvm_vcpu *vcpu,
const struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
if (p->is_write) {
return ignore_write(vcpu, p);
} else {
u64 dfr = read_cpuid(ID_AA64DFR0_EL1);
u64 pfr = read_cpuid(ID_AA64PFR0_EL1);
u32 el3 = !!((pfr >> 12) & 0xf);
*vcpu_reg(vcpu, p->Rt) = ((((dfr >> 20) & 0xf) << 28) |
(((dfr >> 12) & 0xf) << 24) |
(((dfr >> 28) & 0xf) << 20) |
(6 << 16) | (el3 << 14) | (el3 << 12));
return true;
}
}
static bool trap_debug32(struct kvm_vcpu *vcpu,
const struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
if (p->is_write) {
vcpu_cp14(vcpu, r->reg) = *vcpu_reg(vcpu, p->Rt);
vcpu->arch.debug_flags |= KVM_ARM64_DEBUG_DIRTY;
} else {
*vcpu_reg(vcpu, p->Rt) = vcpu_cp14(vcpu, r->reg);
}
return true;
}
#define DBG_BCR_BVR_WCR_WVR(n) \
/* DBGBVRn */ \
{ Op1( 0), CRn( 0), CRm((n)), Op2( 4), trap_debug32, \
NULL, (cp14_DBGBVR0 + (n) * 2) }, \
/* DBGBCRn */ \
{ Op1( 0), CRn( 0), CRm((n)), Op2( 5), trap_debug32, \
NULL, (cp14_DBGBCR0 + (n) * 2) }, \
/* DBGWVRn */ \
{ Op1( 0), CRn( 0), CRm((n)), Op2( 6), trap_debug32, \
NULL, (cp14_DBGWVR0 + (n) * 2) }, \
/* DBGWCRn */ \
{ Op1( 0), CRn( 0), CRm((n)), Op2( 7), trap_debug32, \
NULL, (cp14_DBGWCR0 + (n) * 2) }
#define DBGBXVR(n) \
{ Op1( 0), CRn( 1), CRm((n)), Op2( 1), trap_debug32, \
NULL, cp14_DBGBXVR0 + n * 2 }
/*
* Trapped cp14 registers. We generally ignore most of the external
* debug, on the principle that they don't really make sense to a
* guest. Revisit this one day, whould this principle change.
*/
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:27:13 +01:00
static const struct sys_reg_desc cp14_regs[] = {
arm64: KVM: add trap handlers for AArch32 debug registers Add handlers for all the AArch32 debug registers that are accessible from EL0 or EL1. The code follow the same strategy as the AArch64 counterpart with regards to tracking the dirty state of the debug registers. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:31:37 +01:00
/* DBGIDR */
{ Op1( 0), CRn( 0), CRm( 0), Op2( 0), trap_dbgidr },
/* DBGDTRRXext */
{ Op1( 0), CRn( 0), CRm( 0), Op2( 2), trap_raz_wi },
DBG_BCR_BVR_WCR_WVR(0),
/* DBGDSCRint */
{ Op1( 0), CRn( 0), CRm( 1), Op2( 0), trap_raz_wi },
DBG_BCR_BVR_WCR_WVR(1),
/* DBGDCCINT */
{ Op1( 0), CRn( 0), CRm( 2), Op2( 0), trap_debug32 },
/* DBGDSCRext */
{ Op1( 0), CRn( 0), CRm( 2), Op2( 2), trap_debug32 },
DBG_BCR_BVR_WCR_WVR(2),
/* DBGDTR[RT]Xint */
{ Op1( 0), CRn( 0), CRm( 3), Op2( 0), trap_raz_wi },
/* DBGDTR[RT]Xext */
{ Op1( 0), CRn( 0), CRm( 3), Op2( 2), trap_raz_wi },
DBG_BCR_BVR_WCR_WVR(3),
DBG_BCR_BVR_WCR_WVR(4),
DBG_BCR_BVR_WCR_WVR(5),
/* DBGWFAR */
{ Op1( 0), CRn( 0), CRm( 6), Op2( 0), trap_raz_wi },
/* DBGOSECCR */
{ Op1( 0), CRn( 0), CRm( 6), Op2( 2), trap_raz_wi },
DBG_BCR_BVR_WCR_WVR(6),
/* DBGVCR */
{ Op1( 0), CRn( 0), CRm( 7), Op2( 0), trap_debug32 },
DBG_BCR_BVR_WCR_WVR(7),
DBG_BCR_BVR_WCR_WVR(8),
DBG_BCR_BVR_WCR_WVR(9),
DBG_BCR_BVR_WCR_WVR(10),
DBG_BCR_BVR_WCR_WVR(11),
DBG_BCR_BVR_WCR_WVR(12),
DBG_BCR_BVR_WCR_WVR(13),
DBG_BCR_BVR_WCR_WVR(14),
DBG_BCR_BVR_WCR_WVR(15),
/* DBGDRAR (32bit) */
{ Op1( 0), CRn( 1), CRm( 0), Op2( 0), trap_raz_wi },
DBGBXVR(0),
/* DBGOSLAR */
{ Op1( 0), CRn( 1), CRm( 0), Op2( 4), trap_raz_wi },
DBGBXVR(1),
/* DBGOSLSR */
{ Op1( 0), CRn( 1), CRm( 1), Op2( 4), trap_oslsr_el1 },
DBGBXVR(2),
DBGBXVR(3),
/* DBGOSDLR */
{ Op1( 0), CRn( 1), CRm( 3), Op2( 4), trap_raz_wi },
DBGBXVR(4),
/* DBGPRCR */
{ Op1( 0), CRn( 1), CRm( 4), Op2( 4), trap_raz_wi },
DBGBXVR(5),
DBGBXVR(6),
DBGBXVR(7),
DBGBXVR(8),
DBGBXVR(9),
DBGBXVR(10),
DBGBXVR(11),
DBGBXVR(12),
DBGBXVR(13),
DBGBXVR(14),
DBGBXVR(15),
/* DBGDSAR (32bit) */
{ Op1( 0), CRn( 2), CRm( 0), Op2( 0), trap_raz_wi },
/* DBGDEVID2 */
{ Op1( 0), CRn( 7), CRm( 0), Op2( 7), trap_raz_wi },
/* DBGDEVID1 */
{ Op1( 0), CRn( 7), CRm( 1), Op2( 7), trap_raz_wi },
/* DBGDEVID */
{ Op1( 0), CRn( 7), CRm( 2), Op2( 7), trap_raz_wi },
/* DBGCLAIMSET */
{ Op1( 0), CRn( 7), CRm( 8), Op2( 6), trap_raz_wi },
/* DBGCLAIMCLR */
{ Op1( 0), CRn( 7), CRm( 9), Op2( 6), trap_raz_wi },
/* DBGAUTHSTATUS */
{ Op1( 0), CRn( 7), CRm(14), Op2( 6), trap_dbgauthstatus_el1 },
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:27:13 +01:00
};
arm64: KVM: use separate tables for AArch32 32 and 64bit traps An interesting "feature" of the CP14 encoding is that there is an overlap between 32 and 64bit registers, meaning they cannot live in the same table as we did for CP15. Create separate tables for 64bit CP14 and CP15 registers, and let the top level handler use the right one. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 14:11:48 +01:00
/* Trapped cp14 64bit registers */
static const struct sys_reg_desc cp14_64_regs[] = {
arm64: KVM: add trap handlers for AArch32 debug registers Add handlers for all the AArch32 debug registers that are accessible from EL0 or EL1. The code follow the same strategy as the AArch64 counterpart with regards to tracking the dirty state of the debug registers. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:31:37 +01:00
/* DBGDRAR (64bit) */
{ Op1( 0), CRm( 1), .access = trap_raz_wi },
/* DBGDSAR (64bit) */
{ Op1( 0), CRm( 2), .access = trap_raz_wi },
arm64: KVM: use separate tables for AArch32 32 and 64bit traps An interesting "feature" of the CP14 encoding is that there is an overlap between 32 and 64bit registers, meaning they cannot live in the same table as we did for CP15. Create separate tables for 64bit CP14 and CP15 registers, and let the top level handler use the right one. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 14:11:48 +01:00
};
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-14 18:00:55 +00:00
/*
* Trapped cp15 registers. TTBR0/TTBR1 get a double encoding,
* depending on the way they are accessed (as a 32bit or a 64bit
* register).
*/
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
static const struct sys_reg_desc cp15_regs[] = {
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-14 18:00:55 +00:00
{ Op1( 0), CRn( 1), CRm( 0), Op2( 0), access_sctlr, NULL, c1_SCTLR },
{ Op1( 0), CRn( 2), CRm( 0), Op2( 0), access_vm_reg, NULL, c2_TTBR0 },
{ Op1( 0), CRn( 2), CRm( 0), Op2( 1), access_vm_reg, NULL, c2_TTBR1 },
{ Op1( 0), CRn( 2), CRm( 0), Op2( 2), access_vm_reg, NULL, c2_TTBCR },
{ Op1( 0), CRn( 3), CRm( 0), Op2( 0), access_vm_reg, NULL, c3_DACR },
{ Op1( 0), CRn( 5), CRm( 0), Op2( 0), access_vm_reg, NULL, c5_DFSR },
{ Op1( 0), CRn( 5), CRm( 0), Op2( 1), access_vm_reg, NULL, c5_IFSR },
{ Op1( 0), CRn( 5), CRm( 1), Op2( 0), access_vm_reg, NULL, c5_ADFSR },
{ Op1( 0), CRn( 5), CRm( 1), Op2( 1), access_vm_reg, NULL, c5_AIFSR },
{ Op1( 0), CRn( 6), CRm( 0), Op2( 0), access_vm_reg, NULL, c6_DFAR },
{ Op1( 0), CRn( 6), CRm( 0), Op2( 2), access_vm_reg, NULL, c6_IFAR },
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
/*
* DC{C,I,CI}SW operations:
*/
{ Op1( 0), CRn( 7), CRm( 6), Op2( 2), access_dcsw },
{ Op1( 0), CRn( 7), CRm(10), Op2( 2), access_dcsw },
{ Op1( 0), CRn( 7), CRm(14), Op2( 2), access_dcsw },
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-14 18:00:55 +00:00
arm64: KVM: rename pm_fake handler to trap_raz_wi pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:21:16 +01:00
/* PMU */
{ Op1( 0), CRn( 9), CRm(12), Op2( 0), trap_raz_wi },
{ Op1( 0), CRn( 9), CRm(12), Op2( 1), trap_raz_wi },
{ Op1( 0), CRn( 9), CRm(12), Op2( 2), trap_raz_wi },
{ Op1( 0), CRn( 9), CRm(12), Op2( 3), trap_raz_wi },
{ Op1( 0), CRn( 9), CRm(12), Op2( 5), trap_raz_wi },
{ Op1( 0), CRn( 9), CRm(12), Op2( 6), trap_raz_wi },
{ Op1( 0), CRn( 9), CRm(12), Op2( 7), trap_raz_wi },
{ Op1( 0), CRn( 9), CRm(13), Op2( 0), trap_raz_wi },
{ Op1( 0), CRn( 9), CRm(13), Op2( 1), trap_raz_wi },
{ Op1( 0), CRn( 9), CRm(13), Op2( 2), trap_raz_wi },
{ Op1( 0), CRn( 9), CRm(14), Op2( 0), trap_raz_wi },
{ Op1( 0), CRn( 9), CRm(14), Op2( 1), trap_raz_wi },
{ Op1( 0), CRn( 9), CRm(14), Op2( 2), trap_raz_wi },
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-14 18:00:55 +00:00
{ Op1( 0), CRn(10), CRm( 2), Op2( 0), access_vm_reg, NULL, c10_PRRR },
{ Op1( 0), CRn(10), CRm( 2), Op2( 1), access_vm_reg, NULL, c10_NMRR },
{ Op1( 0), CRn(10), CRm( 3), Op2( 0), access_vm_reg, NULL, c10_AMAIR0 },
{ Op1( 0), CRn(10), CRm( 3), Op2( 1), access_vm_reg, NULL, c10_AMAIR1 },
{ Op1( 0), CRn(13), CRm( 0), Op2( 1), access_vm_reg, NULL, c13_CID },
arm64: KVM: use separate tables for AArch32 32 and 64bit traps An interesting "feature" of the CP14 encoding is that there is an overlap between 32 and 64bit registers, meaning they cannot live in the same table as we did for CP15. Create separate tables for 64bit CP14 and CP15 registers, and let the top level handler use the right one. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 14:11:48 +01:00
};
static const struct sys_reg_desc cp15_64_regs[] = {
{ Op1( 0), CRn( 0), CRm( 2), Op2( 0), access_vm_reg, NULL, c2_TTBR0 },
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-14 18:00:55 +00:00
{ Op1( 1), CRn( 0), CRm( 2), Op2( 0), access_vm_reg, NULL, c2_TTBR1 },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
};
/* Target specific emulation tables */
static struct kvm_sys_reg_target_table *target_tables[KVM_ARM_NUM_TARGETS];
void kvm_register_target_sys_reg_table(unsigned int target,
struct kvm_sys_reg_target_table *table)
{
target_tables[target] = table;
}
/* Get specific register table for this target. */
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
static const struct sys_reg_desc *get_target_table(unsigned target,
bool mode_is_64,
size_t *num)
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
{
struct kvm_sys_reg_target_table *table;
table = target_tables[target];
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
if (mode_is_64) {
*num = table->table64.num;
return table->table64.table;
} else {
*num = table->table32.num;
return table->table32.table;
}
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
}
static const struct sys_reg_desc *find_reg(const struct sys_reg_params *params,
const struct sys_reg_desc table[],
unsigned int num)
{
unsigned int i;
for (i = 0; i < num; i++) {
const struct sys_reg_desc *r = &table[i];
if (params->Op0 != r->Op0)
continue;
if (params->Op1 != r->Op1)
continue;
if (params->CRn != r->CRn)
continue;
if (params->CRm != r->CRm)
continue;
if (params->Op2 != r->Op2)
continue;
return r;
}
return NULL;
}
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
int kvm_handle_cp14_load_store(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
kvm_inject_undefined(vcpu);
return 1;
}
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:27:13 +01:00
/*
* emulate_cp -- tries to match a sys_reg access in a handling table, and
* call the corresponding trap handler.
*
* @params: pointer to the descriptor of the access
* @table: array of trap descriptors
* @num: size of the trap descriptor array
*
* Return 0 if the access has been handled, and -1 if not.
*/
static int emulate_cp(struct kvm_vcpu *vcpu,
const struct sys_reg_params *params,
const struct sys_reg_desc *table,
size_t num)
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
{
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:27:13 +01:00
const struct sys_reg_desc *r;
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:27:13 +01:00
if (!table)
return -1; /* Not handled */
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
r = find_reg(params, table, num);
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:27:13 +01:00
if (r) {
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
/*
* Not having an accessor means that we have
* configured a trap that we don't know how to
* handle. This certainly qualifies as a gross bug
* that should be fixed right away.
*/
BUG_ON(!r->access);
if (likely(r->access(vcpu, params, r))) {
/* Skip instruction, since it was emulated */
kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
}
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:27:13 +01:00
/* Handled */
return 0;
}
/* Not handled */
return -1;
}
static void unhandled_cp_access(struct kvm_vcpu *vcpu,
struct sys_reg_params *params)
{
u8 hsr_ec = kvm_vcpu_trap_get_class(vcpu);
int cp;
switch(hsr_ec) {
case ESR_EL2_EC_CP15_32:
case ESR_EL2_EC_CP15_64:
cp = 15;
break;
case ESR_EL2_EC_CP14_MR:
case ESR_EL2_EC_CP14_64:
cp = 14;
break;
default:
WARN_ON((cp = -1));
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
}
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:27:13 +01:00
kvm_err("Unsupported guest CP%d access at: %08lx\n",
cp, *vcpu_pc(vcpu));
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
print_sys_reg_instr(params);
kvm_inject_undefined(vcpu);
}
/**
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:27:13 +01:00
* kvm_handle_cp_64 -- handles a mrrc/mcrr trap on a guest CP15 access
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
* @vcpu: The VCPU pointer
* @run: The kvm_run struct
*/
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:27:13 +01:00
static int kvm_handle_cp_64(struct kvm_vcpu *vcpu,
const struct sys_reg_desc *global,
size_t nr_global,
const struct sys_reg_desc *target_specific,
size_t nr_specific)
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
{
struct sys_reg_params params;
u32 hsr = kvm_vcpu_get_hsr(vcpu);
int Rt2 = (hsr >> 10) & 0xf;
arm64: KVM: allows discrimination of AArch32 sysreg access The current handling of AArch32 trapping is slightly less than perfect, as it is not possible (from a handler point of view) to distinguish it from an AArch64 access, nor to tell a 32bit from a 64bit access either. Fix this by introducing two additional flags: - is_aarch32: true if the access was made in AArch32 mode - is_32bit: true if is_aarch32 == true and a MCR/MRC instruction was used to perform the access (as opposed to MCRR/MRRC). This allows a handler to cover all the possible conditions in which a system register gets trapped. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-21 10:55:17 +00:00
params.is_aarch32 = true;
params.is_32bit = false;
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
params.CRm = (hsr >> 1) & 0xf;
params.Rt = (hsr >> 5) & 0xf;
params.is_write = ((hsr & 1) == 0);
params.Op0 = 0;
params.Op1 = (hsr >> 16) & 0xf;
params.Op2 = 0;
params.CRn = 0;
/*
* Massive hack here. Store Rt2 in the top 32bits so we only
* have one register to deal with. As we use the same trap
* backends between AArch32 and AArch64, we get away with it.
*/
if (params.is_write) {
u64 val = *vcpu_reg(vcpu, params.Rt);
val &= 0xffffffff;
val |= *vcpu_reg(vcpu, Rt2) << 32;
*vcpu_reg(vcpu, params.Rt) = val;
}
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:27:13 +01:00
if (!emulate_cp(vcpu, &params, target_specific, nr_specific))
goto out;
if (!emulate_cp(vcpu, &params, global, nr_global))
goto out;
unhandled_cp_access(vcpu, &params);
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:27:13 +01:00
out:
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
/* Do the opposite hack for the read side */
if (!params.is_write) {
u64 val = *vcpu_reg(vcpu, params.Rt);
val >>= 32;
*vcpu_reg(vcpu, Rt2) = val;
}
return 1;
}
/**
* kvm_handle_cp15_32 -- handles a mrc/mcr trap on a guest CP15 access
* @vcpu: The VCPU pointer
* @run: The kvm_run struct
*/
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:27:13 +01:00
static int kvm_handle_cp_32(struct kvm_vcpu *vcpu,
const struct sys_reg_desc *global,
size_t nr_global,
const struct sys_reg_desc *target_specific,
size_t nr_specific)
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
{
struct sys_reg_params params;
u32 hsr = kvm_vcpu_get_hsr(vcpu);
arm64: KVM: allows discrimination of AArch32 sysreg access The current handling of AArch32 trapping is slightly less than perfect, as it is not possible (from a handler point of view) to distinguish it from an AArch64 access, nor to tell a 32bit from a 64bit access either. Fix this by introducing two additional flags: - is_aarch32: true if the access was made in AArch32 mode - is_32bit: true if is_aarch32 == true and a MCR/MRC instruction was used to perform the access (as opposed to MCRR/MRRC). This allows a handler to cover all the possible conditions in which a system register gets trapped. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-21 10:55:17 +00:00
params.is_aarch32 = true;
params.is_32bit = true;
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
params.CRm = (hsr >> 1) & 0xf;
params.Rt = (hsr >> 5) & 0xf;
params.is_write = ((hsr & 1) == 0);
params.CRn = (hsr >> 10) & 0xf;
params.Op0 = 0;
params.Op1 = (hsr >> 14) & 0x7;
params.Op2 = (hsr >> 17) & 0x7;
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:27:13 +01:00
if (!emulate_cp(vcpu, &params, target_specific, nr_specific))
return 1;
if (!emulate_cp(vcpu, &params, global, nr_global))
return 1;
unhandled_cp_access(vcpu, &params);
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
return 1;
}
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:27:13 +01:00
int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
const struct sys_reg_desc *target_specific;
size_t num;
target_specific = get_target_table(vcpu->arch.target, false, &num);
return kvm_handle_cp_64(vcpu,
arm64: KVM: use separate tables for AArch32 32 and 64bit traps An interesting "feature" of the CP14 encoding is that there is an overlap between 32 and 64bit registers, meaning they cannot live in the same table as we did for CP15. Create separate tables for 64bit CP14 and CP15 registers, and let the top level handler use the right one. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 14:11:48 +01:00
cp15_64_regs, ARRAY_SIZE(cp15_64_regs),
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:27:13 +01:00
target_specific, num);
}
int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
const struct sys_reg_desc *target_specific;
size_t num;
target_specific = get_target_table(vcpu->arch.target, false, &num);
return kvm_handle_cp_32(vcpu,
cp15_regs, ARRAY_SIZE(cp15_regs),
target_specific, num);
}
int kvm_handle_cp14_64(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
return kvm_handle_cp_64(vcpu,
arm64: KVM: use separate tables for AArch32 32 and 64bit traps An interesting "feature" of the CP14 encoding is that there is an overlap between 32 and 64bit registers, meaning they cannot live in the same table as we did for CP15. Create separate tables for 64bit CP14 and CP15 registers, and let the top level handler use the right one. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 14:11:48 +01:00
cp14_64_regs, ARRAY_SIZE(cp14_64_regs),
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 10:27:13 +01:00
NULL, 0);
}
int kvm_handle_cp14_32(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
return kvm_handle_cp_32(vcpu,
cp14_regs, ARRAY_SIZE(cp14_regs),
NULL, 0);
}
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
static int emulate_sys_reg(struct kvm_vcpu *vcpu,
const struct sys_reg_params *params)
{
size_t num;
const struct sys_reg_desc *table, *r;
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
table = get_target_table(vcpu->arch.target, true, &num);
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* Search target-specific then generic table. */
r = find_reg(params, table, num);
if (!r)
r = find_reg(params, sys_reg_descs, ARRAY_SIZE(sys_reg_descs));
if (likely(r)) {
/*
* Not having an accessor means that we have
* configured a trap that we don't know how to
* handle. This certainly qualifies as a gross bug
* that should be fixed right away.
*/
BUG_ON(!r->access);
if (likely(r->access(vcpu, params, r))) {
/* Skip instruction, since it was emulated */
kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
return 1;
}
/* If access function fails, it should complain. */
} else {
kvm_err("Unsupported guest sys_reg access at: %lx\n",
*vcpu_pc(vcpu));
print_sys_reg_instr(params);
}
kvm_inject_undefined(vcpu);
return 1;
}
static void reset_sys_reg_descs(struct kvm_vcpu *vcpu,
const struct sys_reg_desc *table, size_t num)
{
unsigned long i;
for (i = 0; i < num; i++)
if (table[i].reset)
table[i].reset(vcpu, &table[i]);
}
/**
* kvm_handle_sys_reg -- handles a mrs/msr trap on a guest sys_reg access
* @vcpu: The VCPU pointer
* @run: The kvm_run struct
*/
int kvm_handle_sys_reg(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
struct sys_reg_params params;
unsigned long esr = kvm_vcpu_get_hsr(vcpu);
arm64: KVM: allows discrimination of AArch32 sysreg access The current handling of AArch32 trapping is slightly less than perfect, as it is not possible (from a handler point of view) to distinguish it from an AArch64 access, nor to tell a 32bit from a 64bit access either. Fix this by introducing two additional flags: - is_aarch32: true if the access was made in AArch32 mode - is_32bit: true if is_aarch32 == true and a MCR/MRC instruction was used to perform the access (as opposed to MCRR/MRRC). This allows a handler to cover all the possible conditions in which a system register gets trapped. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-21 10:55:17 +00:00
params.is_aarch32 = false;
params.is_32bit = false;
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
params.Op0 = (esr >> 20) & 3;
params.Op1 = (esr >> 14) & 0x7;
params.CRn = (esr >> 10) & 0xf;
params.CRm = (esr >> 1) & 0xf;
params.Op2 = (esr >> 17) & 0x7;
params.Rt = (esr >> 5) & 0x1f;
params.is_write = !(esr & 1);
return emulate_sys_reg(vcpu, &params);
}
/******************************************************************************
* Userspace API
*****************************************************************************/
static bool index_to_params(u64 id, struct sys_reg_params *params)
{
switch (id & KVM_REG_SIZE_MASK) {
case KVM_REG_SIZE_U64:
/* Any unused index bits means it's not valid. */
if (id & ~(KVM_REG_ARCH_MASK | KVM_REG_SIZE_MASK
| KVM_REG_ARM_COPROC_MASK
| KVM_REG_ARM64_SYSREG_OP0_MASK
| KVM_REG_ARM64_SYSREG_OP1_MASK
| KVM_REG_ARM64_SYSREG_CRN_MASK
| KVM_REG_ARM64_SYSREG_CRM_MASK
| KVM_REG_ARM64_SYSREG_OP2_MASK))
return false;
params->Op0 = ((id & KVM_REG_ARM64_SYSREG_OP0_MASK)
>> KVM_REG_ARM64_SYSREG_OP0_SHIFT);
params->Op1 = ((id & KVM_REG_ARM64_SYSREG_OP1_MASK)
>> KVM_REG_ARM64_SYSREG_OP1_SHIFT);
params->CRn = ((id & KVM_REG_ARM64_SYSREG_CRN_MASK)
>> KVM_REG_ARM64_SYSREG_CRN_SHIFT);
params->CRm = ((id & KVM_REG_ARM64_SYSREG_CRM_MASK)
>> KVM_REG_ARM64_SYSREG_CRM_SHIFT);
params->Op2 = ((id & KVM_REG_ARM64_SYSREG_OP2_MASK)
>> KVM_REG_ARM64_SYSREG_OP2_SHIFT);
return true;
default:
return false;
}
}
/* Decode an index value, and find the sys_reg_desc entry. */
static const struct sys_reg_desc *index_to_sys_reg_desc(struct kvm_vcpu *vcpu,
u64 id)
{
size_t num;
const struct sys_reg_desc *table, *r;
struct sys_reg_params params;
/* We only do sys_reg for now. */
if ((id & KVM_REG_ARM_COPROC_MASK) != KVM_REG_ARM64_SYSREG)
return NULL;
if (!index_to_params(id, &params))
return NULL;
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
table = get_target_table(vcpu->arch.target, true, &num);
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
r = find_reg(&params, table, num);
if (!r)
r = find_reg(&params, sys_reg_descs, ARRAY_SIZE(sys_reg_descs));
/* Not saved in the sys_reg array? */
if (r && !r->reg)
r = NULL;
return r;
}
/*
* These are the invariant sys_reg registers: we let the guest see the
* host versions of these, so they're part of the guest state.
*
* A future CPU may provide a mechanism to present different values to
* the guest, or a future kvm may trap them.
*/
#define FUNCTION_INVARIANT(reg) \
static void get_##reg(struct kvm_vcpu *v, \
const struct sys_reg_desc *r) \
{ \
u64 val; \
\
asm volatile("mrs %0, " __stringify(reg) "\n" \
: "=r" (val)); \
((struct sys_reg_desc *)r)->val = val; \
}
FUNCTION_INVARIANT(midr_el1)
FUNCTION_INVARIANT(ctr_el0)
FUNCTION_INVARIANT(revidr_el1)
FUNCTION_INVARIANT(id_pfr0_el1)
FUNCTION_INVARIANT(id_pfr1_el1)
FUNCTION_INVARIANT(id_dfr0_el1)
FUNCTION_INVARIANT(id_afr0_el1)
FUNCTION_INVARIANT(id_mmfr0_el1)
FUNCTION_INVARIANT(id_mmfr1_el1)
FUNCTION_INVARIANT(id_mmfr2_el1)
FUNCTION_INVARIANT(id_mmfr3_el1)
FUNCTION_INVARIANT(id_isar0_el1)
FUNCTION_INVARIANT(id_isar1_el1)
FUNCTION_INVARIANT(id_isar2_el1)
FUNCTION_INVARIANT(id_isar3_el1)
FUNCTION_INVARIANT(id_isar4_el1)
FUNCTION_INVARIANT(id_isar5_el1)
FUNCTION_INVARIANT(clidr_el1)
FUNCTION_INVARIANT(aidr_el1)
/* ->val is filled in by kvm_sys_reg_table_init() */
static struct sys_reg_desc invariant_sys_regs[] = {
{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0000), Op2(0b000),
NULL, get_midr_el1 },
{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0000), Op2(0b110),
NULL, get_revidr_el1 },
{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b000),
NULL, get_id_pfr0_el1 },
{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b001),
NULL, get_id_pfr1_el1 },
{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b010),
NULL, get_id_dfr0_el1 },
{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b011),
NULL, get_id_afr0_el1 },
{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b100),
NULL, get_id_mmfr0_el1 },
{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b101),
NULL, get_id_mmfr1_el1 },
{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b110),
NULL, get_id_mmfr2_el1 },
{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b111),
NULL, get_id_mmfr3_el1 },
{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b000),
NULL, get_id_isar0_el1 },
{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b001),
NULL, get_id_isar1_el1 },
{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b010),
NULL, get_id_isar2_el1 },
{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b011),
NULL, get_id_isar3_el1 },
{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b100),
NULL, get_id_isar4_el1 },
{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b101),
NULL, get_id_isar5_el1 },
{ Op0(0b11), Op1(0b001), CRn(0b0000), CRm(0b0000), Op2(0b001),
NULL, get_clidr_el1 },
{ Op0(0b11), Op1(0b001), CRn(0b0000), CRm(0b0000), Op2(0b111),
NULL, get_aidr_el1 },
{ Op0(0b11), Op1(0b011), CRn(0b0000), CRm(0b0000), Op2(0b001),
NULL, get_ctr_el0 },
};
ARM64: KVM: set and get of sys registers in BE case Since size of all sys registers is always 8 bytes. Current code is actually endian agnostic. Just clean it up a bit. Removed comment about little endian. Change type of pointer from 'void *' to 'u64 *' to enforce stronger type checking. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-06-12 09:30:12 -07:00
static int reg_from_user(u64 *val, const void __user *uaddr, u64 id)
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
{
if (copy_from_user(val, uaddr, KVM_REG_SIZE(id)) != 0)
return -EFAULT;
return 0;
}
ARM64: KVM: set and get of sys registers in BE case Since size of all sys registers is always 8 bytes. Current code is actually endian agnostic. Just clean it up a bit. Removed comment about little endian. Change type of pointer from 'void *' to 'u64 *' to enforce stronger type checking. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-06-12 09:30:12 -07:00
static int reg_to_user(void __user *uaddr, const u64 *val, u64 id)
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
{
if (copy_to_user(uaddr, val, KVM_REG_SIZE(id)) != 0)
return -EFAULT;
return 0;
}
static int get_invariant_sys_reg(u64 id, void __user *uaddr)
{
struct sys_reg_params params;
const struct sys_reg_desc *r;
if (!index_to_params(id, &params))
return -ENOENT;
r = find_reg(&params, invariant_sys_regs, ARRAY_SIZE(invariant_sys_regs));
if (!r)
return -ENOENT;
return reg_to_user(uaddr, &r->val, id);
}
static int set_invariant_sys_reg(u64 id, void __user *uaddr)
{
struct sys_reg_params params;
const struct sys_reg_desc *r;
int err;
u64 val = 0; /* Make sure high bits are 0 for 32-bit regs */
if (!index_to_params(id, &params))
return -ENOENT;
r = find_reg(&params, invariant_sys_regs, ARRAY_SIZE(invariant_sys_regs));
if (!r)
return -ENOENT;
err = reg_from_user(&val, uaddr, id);
if (err)
return err;
/* This is what we mean by invariant: you can't change it. */
if (r->val != val)
return -EINVAL;
return 0;
}
static bool is_valid_cache(u32 val)
{
u32 level, ctype;
if (val >= CSSELR_MAX)
KVM: ARM/arm64: avoid returning negative error code as bool is_valid_cache returns true if the specified cache is valid. Unfortunately, if the parameter passed it out of range, we return -ENOENT, which ends up as true leading to potential hilarity. This patch returns false on the failure path instead. Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-08-26 15:13:22 +01:00
return false;
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* Bottom bit is Instruction or Data bit. Next 3 bits are level. */
level = (val >> 1);
ctype = (cache_levels >> (level * 3)) & 7;
switch (ctype) {
case 0: /* No cache */
return false;
case 1: /* Instruction cache only */
return (val & 1);
case 2: /* Data cache only */
case 4: /* Unified cache */
return !(val & 1);
case 3: /* Separate instruction and data caches */
return true;
default: /* Reserved: we can't know instruction or data. */
return false;
}
}
static int demux_c15_get(u64 id, void __user *uaddr)
{
u32 val;
u32 __user *uval = uaddr;
/* Fail if we have unknown bits set. */
if (id & ~(KVM_REG_ARCH_MASK|KVM_REG_SIZE_MASK|KVM_REG_ARM_COPROC_MASK
| ((1 << KVM_REG_ARM_COPROC_SHIFT)-1)))
return -ENOENT;
switch (id & KVM_REG_ARM_DEMUX_ID_MASK) {
case KVM_REG_ARM_DEMUX_ID_CCSIDR:
if (KVM_REG_SIZE(id) != 4)
return -ENOENT;
val = (id & KVM_REG_ARM_DEMUX_VAL_MASK)
>> KVM_REG_ARM_DEMUX_VAL_SHIFT;
if (!is_valid_cache(val))
return -ENOENT;
return put_user(get_ccsidr(val), uval);
default:
return -ENOENT;
}
}
static int demux_c15_set(u64 id, void __user *uaddr)
{
u32 val, newval;
u32 __user *uval = uaddr;
/* Fail if we have unknown bits set. */
if (id & ~(KVM_REG_ARCH_MASK|KVM_REG_SIZE_MASK|KVM_REG_ARM_COPROC_MASK
| ((1 << KVM_REG_ARM_COPROC_SHIFT)-1)))
return -ENOENT;
switch (id & KVM_REG_ARM_DEMUX_ID_MASK) {
case KVM_REG_ARM_DEMUX_ID_CCSIDR:
if (KVM_REG_SIZE(id) != 4)
return -ENOENT;
val = (id & KVM_REG_ARM_DEMUX_VAL_MASK)
>> KVM_REG_ARM_DEMUX_VAL_SHIFT;
if (!is_valid_cache(val))
return -ENOENT;
if (get_user(newval, uval))
return -EFAULT;
/* This is also invariant: you can't change it. */
if (newval != get_ccsidr(val))
return -EINVAL;
return 0;
default:
return -ENOENT;
}
}
int kvm_arm_sys_reg_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
{
const struct sys_reg_desc *r;
void __user *uaddr = (void __user *)(unsigned long)reg->addr;
if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_DEMUX)
return demux_c15_get(reg->id, uaddr);
if (KVM_REG_SIZE(reg->id) != sizeof(__u64))
return -ENOENT;
r = index_to_sys_reg_desc(vcpu, reg->id);
if (!r)
return get_invariant_sys_reg(reg->id, uaddr);
return reg_to_user(uaddr, &vcpu_sys_reg(vcpu, r->reg), reg->id);
}
int kvm_arm_sys_reg_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
{
const struct sys_reg_desc *r;
void __user *uaddr = (void __user *)(unsigned long)reg->addr;
if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_DEMUX)
return demux_c15_set(reg->id, uaddr);
if (KVM_REG_SIZE(reg->id) != sizeof(__u64))
return -ENOENT;
r = index_to_sys_reg_desc(vcpu, reg->id);
if (!r)
return set_invariant_sys_reg(reg->id, uaddr);
return reg_from_user(&vcpu_sys_reg(vcpu, r->reg), uaddr, reg->id);
}
static unsigned int num_demux_regs(void)
{
unsigned int i, count = 0;
for (i = 0; i < CSSELR_MAX; i++)
if (is_valid_cache(i))
count++;
return count;
}
static int write_demux_regids(u64 __user *uindices)
{
arm64: KVM: export demux regids as KVM_REG_ARM64 I suspect this is a -ECUTPASTE fault from the initial implementation. If we don't declare the register ID to be KVM_REG_ARM64 the KVM_GET_ONE_REG implementation kvm_arm_get_reg() returns -EINVAL and hilarity ensues. The kvm/api.txt document describes all arm64 registers as starting with 0x60xx... (i.e KVM_REG_ARM64). Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-01 16:53:13 +01:00
u64 val = KVM_REG_ARM64 | KVM_REG_SIZE_U32 | KVM_REG_ARM_DEMUX;
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
unsigned int i;
val |= KVM_REG_ARM_DEMUX_ID_CCSIDR;
for (i = 0; i < CSSELR_MAX; i++) {
if (!is_valid_cache(i))
continue;
if (put_user(val | i, uindices))
return -EFAULT;
uindices++;
}
return 0;
}
static u64 sys_reg_to_index(const struct sys_reg_desc *reg)
{
return (KVM_REG_ARM64 | KVM_REG_SIZE_U64 |
KVM_REG_ARM64_SYSREG |
(reg->Op0 << KVM_REG_ARM64_SYSREG_OP0_SHIFT) |
(reg->Op1 << KVM_REG_ARM64_SYSREG_OP1_SHIFT) |
(reg->CRn << KVM_REG_ARM64_SYSREG_CRN_SHIFT) |
(reg->CRm << KVM_REG_ARM64_SYSREG_CRM_SHIFT) |
(reg->Op2 << KVM_REG_ARM64_SYSREG_OP2_SHIFT));
}
static bool copy_reg_to_user(const struct sys_reg_desc *reg, u64 __user **uind)
{
if (!*uind)
return true;
if (put_user(sys_reg_to_index(reg), *uind))
return false;
(*uind)++;
return true;
}
/* Assumed ordered tables, see kvm_sys_reg_table_init. */
static int walk_sys_regs(struct kvm_vcpu *vcpu, u64 __user *uind)
{
const struct sys_reg_desc *i1, *i2, *end1, *end2;
unsigned int total = 0;
size_t num;
/* We check for duplicates here, to allow arch-specific overrides. */
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
i1 = get_target_table(vcpu->arch.target, true, &num);
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
end1 = i1 + num;
i2 = sys_reg_descs;
end2 = sys_reg_descs + ARRAY_SIZE(sys_reg_descs);
BUG_ON(i1 == end1 || i2 == end2);
/* Walk carefully, as both tables may refer to the same register. */
while (i1 || i2) {
int cmp = cmp_sys_reg(i1, i2);
/* target-specific overrides generic entry. */
if (cmp <= 0) {
/* Ignore registers we trap but don't save. */
if (i1->reg) {
if (!copy_reg_to_user(i1, &uind))
return -EFAULT;
total++;
}
} else {
/* Ignore registers we trap but don't save. */
if (i2->reg) {
if (!copy_reg_to_user(i2, &uind))
return -EFAULT;
total++;
}
}
if (cmp <= 0 && ++i1 == end1)
i1 = NULL;
if (cmp >= 0 && ++i2 == end2)
i2 = NULL;
}
return total;
}
unsigned long kvm_arm_num_sys_reg_descs(struct kvm_vcpu *vcpu)
{
return ARRAY_SIZE(invariant_sys_regs)
+ num_demux_regs()
+ walk_sys_regs(vcpu, (u64 __user *)NULL);
}
int kvm_arm_copy_sys_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices)
{
unsigned int i;
int err;
/* Then give them all the invariant registers' indices. */
for (i = 0; i < ARRAY_SIZE(invariant_sys_regs); i++) {
if (put_user(sys_reg_to_index(&invariant_sys_regs[i]), uindices))
return -EFAULT;
uindices++;
}
err = walk_sys_regs(vcpu, uindices);
if (err < 0)
return err;
uindices += err;
return write_demux_regids(uindices);
}
arm64: KVM: check ordering of all system register tables We now have multiple tables for the various system registers we trap. Make sure we check the order of all of them, as it is critical that we get the order right (been there, done that...). Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-05-07 13:43:39 +01:00
static int check_sysreg_table(const struct sys_reg_desc *table, unsigned int n)
{
unsigned int i;
for (i = 1; i < n; i++) {
if (cmp_sys_reg(&table[i-1], &table[i]) >= 0) {
kvm_err("sys_reg table %p out of order (%d)\n", table, i - 1);
return 1;
}
}
return 0;
}
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
void kvm_sys_reg_table_init(void)
{
unsigned int i;
struct sys_reg_desc clidr;
/* Make sure tables are unique and in order. */
arm64: KVM: check ordering of all system register tables We now have multiple tables for the various system registers we trap. Make sure we check the order of all of them, as it is critical that we get the order right (been there, done that...). Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-05-07 13:43:39 +01:00
BUG_ON(check_sysreg_table(sys_reg_descs, ARRAY_SIZE(sys_reg_descs)));
BUG_ON(check_sysreg_table(cp14_regs, ARRAY_SIZE(cp14_regs)));
BUG_ON(check_sysreg_table(cp14_64_regs, ARRAY_SIZE(cp14_64_regs)));
BUG_ON(check_sysreg_table(cp15_regs, ARRAY_SIZE(cp15_regs)));
BUG_ON(check_sysreg_table(cp15_64_regs, ARRAY_SIZE(cp15_64_regs)));
BUG_ON(check_sysreg_table(invariant_sys_regs, ARRAY_SIZE(invariant_sys_regs)));
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
/* We abuse the reset function to overwrite the table itself. */
for (i = 0; i < ARRAY_SIZE(invariant_sys_regs); i++)
invariant_sys_regs[i].reset(NULL, &invariant_sys_regs[i]);
/*
* CLIDR format is awkward, so clean it up. See ARM B4.1.20:
*
* If software reads the Cache Type fields from Ctype1
* upwards, once it has seen a value of 0b000, no caches
* exist at further-out levels of the hierarchy. So, for
* example, if Ctype3 is the first Cache Type field with a
* value of 0b000, the values of Ctype4 to Ctype7 must be
* ignored.
*/
get_clidr_el1(NULL, &clidr); /* Ugly... */
cache_levels = clidr.val;
for (i = 0; i < 7; i++)
if (((cache_levels >> (i*3)) & 7) == 0)
break;
/* Clear all higher bits. */
cache_levels &= (1 << (i*3))-1;
}
/**
* kvm_reset_sys_regs - sets system registers to reset value
* @vcpu: The VCPU pointer
*
* This function finds the right table above and sets the registers on the
* virtual CPU struct to their architecturally defined reset values.
*/
void kvm_reset_sys_regs(struct kvm_vcpu *vcpu)
{
size_t num;
const struct sys_reg_desc *table;
/* Catch someone adding a register without putting in reset entry. */
memset(&vcpu->arch.ctxt.sys_regs, 0x42, sizeof(vcpu->arch.ctxt.sys_regs));
/* Generic chip reset first (so target could override). */
reset_sys_reg_descs(vcpu, sys_reg_descs, ARRAY_SIZE(sys_reg_descs));
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 10:32:33 +00:00
table = get_target_table(vcpu->arch.target, true, &num);
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-10 16:15:34 +00:00
reset_sys_reg_descs(vcpu, table, num);
for (num = 1; num < NR_SYS_REGS; num++)
if (vcpu_sys_reg(vcpu, num) == 0x4242424242424242)
panic("Didn't reset vcpu_sys_reg(%zi)", num);
}
Reference in a new issue Copy permalink