linux-pinenote/arch/arm/mach-omap1/include/mach/omap16xx.h

/*
 * Hardware definitions for TI OMAP1610/5912/1710 processors.
 *
 * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2 of the License, or (at your
 * option) any later version.
 *
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * You should have received a copy of the  GNU General Public License along
 * with this program; if not, write  to the Free Software Foundation, Inc.,
 * 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#ifndef __ASM_ARCH_OMAP16XX_H
#define __ASM_ARCH_OMAP16XX_H

/*
 * ----------------------------------------------------------------------------
 * Base addresses
 * ----------------------------------------------------------------------------
 */

/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */

#define OMAP16XX_DSP_BASE	0xE0000000
#define OMAP16XX_DSP_SIZE	0x28000
#define OMAP16XX_DSP_START	0xE0000000

#define OMAP16XX_DSPREG_BASE	0xE1000000
#define OMAP16XX_DSPREG_SIZE	SZ_128K
#define OMAP16XX_DSPREG_START	0xE1000000

#define OMAP16XX_SEC_BASE	0xFFFE4000
#define OMAP16XX_SEC_DES	(OMAP16XX_SEC_BASE + 0x0000)
#define OMAP16XX_SEC_SHA1MD5	(OMAP16XX_SEC_BASE + 0x0800)
#define OMAP16XX_SEC_RNG	(OMAP16XX_SEC_BASE + 0x1000)

/*
 * ---------------------------------------------------------------------------
 * Interrupts
 * ---------------------------------------------------------------------------
 */
#define OMAP_IH2_0_BASE		(0xfffe0000)
#define OMAP_IH2_1_BASE		(0xfffe0100)
#define OMAP_IH2_2_BASE		(0xfffe0200)
#define OMAP_IH2_3_BASE		(0xfffe0300)

#define OMAP_IH2_0_ITR		(OMAP_IH2_0_BASE + 0x00)
#define OMAP_IH2_0_MIR		(OMAP_IH2_0_BASE + 0x04)
#define OMAP_IH2_0_SIR_IRQ	(OMAP_IH2_0_BASE + 0x10)
#define OMAP_IH2_0_SIR_FIQ	(OMAP_IH2_0_BASE + 0x14)
#define OMAP_IH2_0_CONTROL	(OMAP_IH2_0_BASE + 0x18)
#define OMAP_IH2_0_ILR0		(OMAP_IH2_0_BASE + 0x1c)
#define OMAP_IH2_0_ISR		(OMAP_IH2_0_BASE + 0x9c)

#define OMAP_IH2_1_ITR		(OMAP_IH2_1_BASE + 0x00)
#define OMAP_IH2_1_MIR		(OMAP_IH2_1_BASE + 0x04)
#define OMAP_IH2_1_SIR_IRQ	(OMAP_IH2_1_BASE + 0x10)
#define OMAP_IH2_1_SIR_FIQ	(OMAP_IH2_1_BASE + 0x14)
#define OMAP_IH2_1_CONTROL	(OMAP_IH2_1_BASE + 0x18)
#define OMAP_IH2_1_ILR1		(OMAP_IH2_1_BASE + 0x1c)
#define OMAP_IH2_1_ISR		(OMAP_IH2_1_BASE + 0x9c)

#define OMAP_IH2_2_ITR		(OMAP_IH2_2_BASE + 0x00)
#define OMAP_IH2_2_MIR		(OMAP_IH2_2_BASE + 0x04)
#define OMAP_IH2_2_SIR_IRQ	(OMAP_IH2_2_BASE + 0x10)
#define OMAP_IH2_2_SIR_FIQ	(OMAP_IH2_2_BASE + 0x14)
#define OMAP_IH2_2_CONTROL	(OMAP_IH2_2_BASE + 0x18)
#define OMAP_IH2_2_ILR2		(OMAP_IH2_2_BASE + 0x1c)
#define OMAP_IH2_2_ISR		(OMAP_IH2_2_BASE + 0x9c)

#define OMAP_IH2_3_ITR		(OMAP_IH2_3_BASE + 0x00)
#define OMAP_IH2_3_MIR		(OMAP_IH2_3_BASE + 0x04)
#define OMAP_IH2_3_SIR_IRQ	(OMAP_IH2_3_BASE + 0x10)
#define OMAP_IH2_3_SIR_FIQ	(OMAP_IH2_3_BASE + 0x14)
#define OMAP_IH2_3_CONTROL	(OMAP_IH2_3_BASE + 0x18)
#define OMAP_IH2_3_ILR3		(OMAP_IH2_3_BASE + 0x1c)
#define OMAP_IH2_3_ISR		(OMAP_IH2_3_BASE + 0x9c)

/*
 * ----------------------------------------------------------------------------
 * Clocks
 * ----------------------------------------------------------------------------
 */
#define OMAP16XX_ARM_IDLECT3	(CLKGEN_REG_BASE + 0x24)

/*
 * ----------------------------------------------------------------------------
 * Pin configuration registers
 * ----------------------------------------------------------------------------
 */
#define OMAP16XX_CONF_VOLTAGE_VDDSHV6	(1 << 8)
#define OMAP16XX_CONF_VOLTAGE_VDDSHV7	(1 << 9)
#define OMAP16XX_CONF_VOLTAGE_VDDSHV8	(1 << 10)
#define OMAP16XX_CONF_VOLTAGE_VDDSHV9	(1 << 11)
#define OMAP16XX_SUBLVDS_CONF_VALID	(1 << 13)

/*
 * ----------------------------------------------------------------------------
 * System control registers
 * ----------------------------------------------------------------------------
 */
#define OMAP1610_RESET_CONTROL  0xfffe1140

/*
 * ---------------------------------------------------------------------------
 * TIPB bus interface
 * ---------------------------------------------------------------------------
 */
#define TIPB_SWITCH_BASE		 (0xfffbc800)
#define OMAP16XX_MMCSD2_SSW_MPU_CONF	(TIPB_SWITCH_BASE + 0x160)

/* UART3 Registers Mapping through MPU bus */
#define UART3_RHR               (OMAP1_UART3_BASE + 0)
#define UART3_THR               (OMAP1_UART3_BASE + 0)
#define UART3_DLL               (OMAP1_UART3_BASE + 0)
#define UART3_IER               (OMAP1_UART3_BASE + 4)
#define UART3_DLH               (OMAP1_UART3_BASE + 4)
#define UART3_IIR               (OMAP1_UART3_BASE + 8)
#define UART3_FCR               (OMAP1_UART3_BASE + 8)
#define UART3_EFR               (OMAP1_UART3_BASE + 8)
#define UART3_LCR               (OMAP1_UART3_BASE + 0x0C)
#define UART3_MCR               (OMAP1_UART3_BASE + 0x10)
#define UART3_XON1_ADDR1        (OMAP1_UART3_BASE + 0x10)
#define UART3_XON2_ADDR2        (OMAP1_UART3_BASE + 0x14)
#define UART3_LSR               (OMAP1_UART3_BASE + 0x14)
#define UART3_TCR               (OMAP1_UART3_BASE + 0x18)
#define UART3_MSR               (OMAP1_UART3_BASE + 0x18)
#define UART3_XOFF1             (OMAP1_UART3_BASE + 0x18)
#define UART3_XOFF2             (OMAP1_UART3_BASE + 0x1C)
#define UART3_SPR               (OMAP1_UART3_BASE + 0x1C)
#define UART3_TLR               (OMAP1_UART3_BASE + 0x1C)
#define UART3_MDR1              (OMAP1_UART3_BASE + 0x20)
#define UART3_MDR2              (OMAP1_UART3_BASE + 0x24)
#define UART3_SFLSR             (OMAP1_UART3_BASE + 0x28)
#define UART3_TXFLL             (OMAP1_UART3_BASE + 0x28)
#define UART3_RESUME            (OMAP1_UART3_BASE + 0x2C)
#define UART3_TXFLH             (OMAP1_UART3_BASE + 0x2C)
#define UART3_SFREGL            (OMAP1_UART3_BASE + 0x30)
#define UART3_RXFLL             (OMAP1_UART3_BASE + 0x30)
#define UART3_SFREGH            (OMAP1_UART3_BASE + 0x34)
#define UART3_RXFLH             (OMAP1_UART3_BASE + 0x34)
#define UART3_BLR               (OMAP1_UART3_BASE + 0x38)
#define UART3_ACREG             (OMAP1_UART3_BASE + 0x3C)
#define UART3_DIV16             (OMAP1_UART3_BASE + 0x3C)
#define UART3_SCR               (OMAP1_UART3_BASE + 0x40)
#define UART3_SSR               (OMAP1_UART3_BASE + 0x44)
#define UART3_EBLR              (OMAP1_UART3_BASE + 0x48)
#define UART3_OSC_12M_SEL       (OMAP1_UART3_BASE + 0x4C)
#define UART3_MVR               (OMAP1_UART3_BASE + 0x50)

/*
 * ---------------------------------------------------------------------------
 * Watchdog timer
 * ---------------------------------------------------------------------------
 */

/* 32-bit Watchdog timer in OMAP 16XX */
#define OMAP_16XX_WATCHDOG_BASE        (0xfffeb000)
#define OMAP_16XX_WIDR         (OMAP_16XX_WATCHDOG_BASE + 0x00)
#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)
#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14)
#define OMAP_16XX_WCLR         (OMAP_16XX_WATCHDOG_BASE + 0x24)
#define OMAP_16XX_WCRR         (OMAP_16XX_WATCHDOG_BASE + 0x28)
#define OMAP_16XX_WLDR         (OMAP_16XX_WATCHDOG_BASE + 0x2c)
#define OMAP_16XX_WTGR         (OMAP_16XX_WATCHDOG_BASE + 0x30)
#define OMAP_16XX_WWPS         (OMAP_16XX_WATCHDOG_BASE + 0x34)
#define OMAP_16XX_WSPR         (OMAP_16XX_WATCHDOG_BASE + 0x48)

#define WCLR_PRE_SHIFT         5
#define WCLR_PTV_SHIFT         2

#define WWPS_W_PEND_WSPR       (1 << 4)
#define WWPS_W_PEND_WTGR       (1 << 3)
#define WWPS_W_PEND_WLDR       (1 << 2)
#define WWPS_W_PEND_WCRR       (1 << 1)
#define WWPS_W_PEND_WCLR       (1 << 0)

#define WSPR_ENABLE_0          (0x0000bbbb)
#define WSPR_ENABLE_1          (0x00004444)
#define WSPR_DISABLE_0         (0x0000aaaa)
#define WSPR_DISABLE_1         (0x00005555)

#define OMAP16XX_DSP_MMU_BASE	(0xfffed200)
#define OMAP16XX_MAILBOX_BASE	(0xfffcf000)

#endif /*  __ASM_ARCH_OMAP16XX_H */
ARM: OMAP1: Move SoC specific headers from plat to mach for omap1 There's no need to have these in plat-omap any longer. Note that these could eventually be made local to mach-omap1 instead of being in mach. But to do that, at least various driver access using omap7xxx.h registers needs to be fixed first. Cc: spi-devel-general@lists.sourceforge.net Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Tony Lindgren <tony@atomide.com> 2012-08-31 17:04:35 -07:00			`/*`
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00			`* Hardware definitions for TI OMAP1610/5912/1710 processors.`
			`*`
			`* Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>`
			`*`
			`* This program is free software; you can redistribute it and/or modify it`
			`* under the terms of the GNU General Public License as published by the`
			`* Free Software Foundation; either version 2 of the License, or (at your`
			`* option) any later version.`
			`*`
			* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
			`* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF`
			`* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN`
			`* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,`
			`* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT`
			`* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF`
			`* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON`
			`* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT`
			`* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF`
			`* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.`
			`*`
			`* You should have received a copy of the GNU General Public License along`
			`* with this program; if not, write to the Free Software Foundation, Inc.,`
			`* 675 Mass Ave, Cambridge, MA 02139, USA.`
			`*/`

			`#ifndef __ASM_ARCH_OMAP16XX_H`
			`#define __ASM_ARCH_OMAP16XX_H`

			`/*`
			`* ----------------------------------------------------------------------------`
			`* Base addresses`
			`* ----------------------------------------------------------------------------`
			`*/`

			`/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */`

			`#define OMAP16XX_DSP_BASE 0xE0000000`
			`#define OMAP16XX_DSP_SIZE 0x28000`
			`#define OMAP16XX_DSP_START 0xE0000000`

			`#define OMAP16XX_DSPREG_BASE 0xE1000000`
			`#define OMAP16XX_DSPREG_SIZE SZ_128K`
			`#define OMAP16XX_DSPREG_START 0xE1000000`

ARM: OMAP2: Misc updates from linux-omap tree Misc updates from linux-omap tree, mostly to update common device initialization and add missing defines from linux-omap tree. Also some changes to make room for adding 34xx in following patches. Note that the I2C resources are now set up in arch/arm/plat-omap/i2c.c helper, and can be removed from devices.c. Signed-off-by: Tony Lindgren <tony@atomide.com> 2008-10-06 15:49:36 +03:00			`#define OMAP16XX_SEC_BASE 0xFFFE4000`
			`#define OMAP16XX_SEC_DES (OMAP16XX_SEC_BASE + 0x0000)`
			`#define OMAP16XX_SEC_SHA1MD5 (OMAP16XX_SEC_BASE + 0x0800)`
			`#define OMAP16XX_SEC_RNG (OMAP16XX_SEC_BASE + 0x1000)`

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00			`/*`
			`* ---------------------------------------------------------------------------`
			`* Interrupts`
			`* ---------------------------------------------------------------------------`
			`*/`
			`#define OMAP_IH2_0_BASE (0xfffe0000)`
			`#define OMAP_IH2_1_BASE (0xfffe0100)`
			`#define OMAP_IH2_2_BASE (0xfffe0200)`
			`#define OMAP_IH2_3_BASE (0xfffe0300)`

			`#define OMAP_IH2_0_ITR (OMAP_IH2_0_BASE + 0x00)`
			`#define OMAP_IH2_0_MIR (OMAP_IH2_0_BASE + 0x04)`
			`#define OMAP_IH2_0_SIR_IRQ (OMAP_IH2_0_BASE + 0x10)`
			`#define OMAP_IH2_0_SIR_FIQ (OMAP_IH2_0_BASE + 0x14)`
			`#define OMAP_IH2_0_CONTROL (OMAP_IH2_0_BASE + 0x18)`
			`#define OMAP_IH2_0_ILR0 (OMAP_IH2_0_BASE + 0x1c)`
			`#define OMAP_IH2_0_ISR (OMAP_IH2_0_BASE + 0x9c)`

			`#define OMAP_IH2_1_ITR (OMAP_IH2_1_BASE + 0x00)`
			`#define OMAP_IH2_1_MIR (OMAP_IH2_1_BASE + 0x04)`
			`#define OMAP_IH2_1_SIR_IRQ (OMAP_IH2_1_BASE + 0x10)`
			`#define OMAP_IH2_1_SIR_FIQ (OMAP_IH2_1_BASE + 0x14)`
			`#define OMAP_IH2_1_CONTROL (OMAP_IH2_1_BASE + 0x18)`
			`#define OMAP_IH2_1_ILR1 (OMAP_IH2_1_BASE + 0x1c)`
			`#define OMAP_IH2_1_ISR (OMAP_IH2_1_BASE + 0x9c)`

			`#define OMAP_IH2_2_ITR (OMAP_IH2_2_BASE + 0x00)`
			`#define OMAP_IH2_2_MIR (OMAP_IH2_2_BASE + 0x04)`
			`#define OMAP_IH2_2_SIR_IRQ (OMAP_IH2_2_BASE + 0x10)`
			`#define OMAP_IH2_2_SIR_FIQ (OMAP_IH2_2_BASE + 0x14)`
			`#define OMAP_IH2_2_CONTROL (OMAP_IH2_2_BASE + 0x18)`
			`#define OMAP_IH2_2_ILR2 (OMAP_IH2_2_BASE + 0x1c)`
			`#define OMAP_IH2_2_ISR (OMAP_IH2_2_BASE + 0x9c)`

			`#define OMAP_IH2_3_ITR (OMAP_IH2_3_BASE + 0x00)`
			`#define OMAP_IH2_3_MIR (OMAP_IH2_3_BASE + 0x04)`
			`#define OMAP_IH2_3_SIR_IRQ (OMAP_IH2_3_BASE + 0x10)`
			`#define OMAP_IH2_3_SIR_FIQ (OMAP_IH2_3_BASE + 0x14)`
			`#define OMAP_IH2_3_CONTROL (OMAP_IH2_3_BASE + 0x18)`
			`#define OMAP_IH2_3_ILR3 (OMAP_IH2_3_BASE + 0x1c)`
			`#define OMAP_IH2_3_ISR (OMAP_IH2_3_BASE + 0x9c)`

			`/*`
			`* ----------------------------------------------------------------------------`
			`* Clocks`
			`* ----------------------------------------------------------------------------`
			`*/`
			`#define OMAP16XX_ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)`

			`/*`
			`* ----------------------------------------------------------------------------`
			`* Pin configuration registers`
			`* ----------------------------------------------------------------------------`
			`*/`
			`#define OMAP16XX_CONF_VOLTAGE_VDDSHV6 (1 << 8)`
			`#define OMAP16XX_CONF_VOLTAGE_VDDSHV7 (1 << 9)`
			`#define OMAP16XX_CONF_VOLTAGE_VDDSHV8 (1 << 10)`
			`#define OMAP16XX_CONF_VOLTAGE_VDDSHV9 (1 << 11)`
			`#define OMAP16XX_SUBLVDS_CONF_VALID (1 << 13)`

			`/*`
			`* ----------------------------------------------------------------------------`
			`* System control registers`
			`* ----------------------------------------------------------------------------`
			`*/`
			`#define OMAP1610_RESET_CONTROL 0xfffe1140`

			`/*`
			`* ---------------------------------------------------------------------------`
			`* TIPB bus interface`
			`* ---------------------------------------------------------------------------`
			`*/`
			`#define TIPB_SWITCH_BASE (0xfffbc800)`
			`#define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160)`

tree-wide: fix assorted typos all over the place That is "success", "unknown", "through", "performance", "[re\|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over\|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 2009-11-14 13:09:05 -02:00			`/* UART3 Registers Mapping through MPU bus */`
omap: Clean the serial port defines This way we don't have conflicts with the defines with compiling in multiple omaps. Set the addresses for uarts in struct omap_globals for the early serial init code. Signed-off-by: Tony Lindgren <tony@atomide.com> 2010-02-15 08:48:53 -08:00			`#define UART3_RHR (OMAP1_UART3_BASE + 0)`
			`#define UART3_THR (OMAP1_UART3_BASE + 0)`
			`#define UART3_DLL (OMAP1_UART3_BASE + 0)`
			`#define UART3_IER (OMAP1_UART3_BASE + 4)`
			`#define UART3_DLH (OMAP1_UART3_BASE + 4)`
			`#define UART3_IIR (OMAP1_UART3_BASE + 8)`
			`#define UART3_FCR (OMAP1_UART3_BASE + 8)`
			`#define UART3_EFR (OMAP1_UART3_BASE + 8)`
			`#define UART3_LCR (OMAP1_UART3_BASE + 0x0C)`
			`#define UART3_MCR (OMAP1_UART3_BASE + 0x10)`
			`#define UART3_XON1_ADDR1 (OMAP1_UART3_BASE + 0x10)`
			`#define UART3_XON2_ADDR2 (OMAP1_UART3_BASE + 0x14)`
			`#define UART3_LSR (OMAP1_UART3_BASE + 0x14)`
			`#define UART3_TCR (OMAP1_UART3_BASE + 0x18)`
			`#define UART3_MSR (OMAP1_UART3_BASE + 0x18)`
			`#define UART3_XOFF1 (OMAP1_UART3_BASE + 0x18)`
			`#define UART3_XOFF2 (OMAP1_UART3_BASE + 0x1C)`
			`#define UART3_SPR (OMAP1_UART3_BASE + 0x1C)`
			`#define UART3_TLR (OMAP1_UART3_BASE + 0x1C)`
			`#define UART3_MDR1 (OMAP1_UART3_BASE + 0x20)`
			`#define UART3_MDR2 (OMAP1_UART3_BASE + 0x24)`
			`#define UART3_SFLSR (OMAP1_UART3_BASE + 0x28)`
			`#define UART3_TXFLL (OMAP1_UART3_BASE + 0x28)`
			`#define UART3_RESUME (OMAP1_UART3_BASE + 0x2C)`
			`#define UART3_TXFLH (OMAP1_UART3_BASE + 0x2C)`
			`#define UART3_SFREGL (OMAP1_UART3_BASE + 0x30)`
			`#define UART3_RXFLL (OMAP1_UART3_BASE + 0x30)`
			`#define UART3_SFREGH (OMAP1_UART3_BASE + 0x34)`
			`#define UART3_RXFLH (OMAP1_UART3_BASE + 0x34)`
			`#define UART3_BLR (OMAP1_UART3_BASE + 0x38)`
			`#define UART3_ACREG (OMAP1_UART3_BASE + 0x3C)`
			`#define UART3_DIV16 (OMAP1_UART3_BASE + 0x3C)`
			`#define UART3_SCR (OMAP1_UART3_BASE + 0x40)`
			`#define UART3_SSR (OMAP1_UART3_BASE + 0x44)`
			`#define UART3_EBLR (OMAP1_UART3_BASE + 0x48)`
			`#define UART3_OSC_12M_SEL (OMAP1_UART3_BASE + 0x4C)`
			`#define UART3_MVR (OMAP1_UART3_BASE + 0x50)`
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00
[PATCH] ARM: 2797/1: OMAP update 1/11: Update include files Patch from Tony Lindgren This patch by various OMAP developers syncs the OMAP specific include files with the linux-omap tree. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 2005-07-10 19:58:06 +01:00			`/*`
			`* ---------------------------------------------------------------------------`
			`* Watchdog timer`
			`* ---------------------------------------------------------------------------`
			`*/`

			`/* 32-bit Watchdog timer in OMAP 16XX */`
			`#define OMAP_16XX_WATCHDOG_BASE (0xfffeb000)`
			`#define OMAP_16XX_WIDR (OMAP_16XX_WATCHDOG_BASE + 0x00)`
			`#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)`
			`#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14)`
			`#define OMAP_16XX_WCLR (OMAP_16XX_WATCHDOG_BASE + 0x24)`
			`#define OMAP_16XX_WCRR (OMAP_16XX_WATCHDOG_BASE + 0x28)`
			`#define OMAP_16XX_WLDR (OMAP_16XX_WATCHDOG_BASE + 0x2c)`
			`#define OMAP_16XX_WTGR (OMAP_16XX_WATCHDOG_BASE + 0x30)`
			`#define OMAP_16XX_WWPS (OMAP_16XX_WATCHDOG_BASE + 0x34)`
			`#define OMAP_16XX_WSPR (OMAP_16XX_WATCHDOG_BASE + 0x48)`

			`#define WCLR_PRE_SHIFT 5`
			`#define WCLR_PTV_SHIFT 2`

			`#define WWPS_W_PEND_WSPR (1 << 4)`
			`#define WWPS_W_PEND_WTGR (1 << 3)`
			`#define WWPS_W_PEND_WLDR (1 << 2)`
			`#define WWPS_W_PEND_WCRR (1 << 1)`
			`#define WWPS_W_PEND_WCLR (1 << 0)`

			`#define WSPR_ENABLE_0 (0x0000bbbb)`
			`#define WSPR_ENABLE_1 (0x00004444)`
			`#define WSPR_DISABLE_0 (0x0000aaaa)`
			`#define WSPR_DISABLE_1 (0x00005555)`

ARM: OMAP2: Misc updates from linux-omap tree Misc updates from linux-omap tree, mostly to update common device initialization and add missing defines from linux-omap tree. Also some changes to make room for adding 34xx in following patches. Note that the I2C resources are now set up in arch/arm/plat-omap/i2c.c helper, and can be removed from devices.c. Signed-off-by: Tony Lindgren <tony@atomide.com> 2008-10-06 15:49:36 +03:00			`#define OMAP16XX_DSP_MMU_BASE (0xfffed200)`
ARM: OMAP: Sync headers with linux-omap This patch syncs omap specific headers with linux-omap. Most of the changes needed because of bitrot caused by driver changes in linux-omap tree. Integrating this is needed for adding support for various omap drivers. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 2006-12-07 13:57:38 -08:00			`#define OMAP16XX_MAILBOX_BASE (0xfffcf000)`

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00			`#endif /* __ASM_ARCH_OMAP16XX_H */`