1120 lines
		
	
	
	
		
			30 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
		
		
			
		
	
	
			1120 lines
		
	
	
	
		
			30 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
|   | /*
 | ||
|  |  * Driver for Alauda-based card readers | ||
|  |  * | ||
|  |  * Current development and maintenance by: | ||
|  |  *   (c) 2005 Daniel Drake <dsd@gentoo.org> | ||
|  |  * | ||
|  |  * The 'Alauda' is a chip manufacturered by RATOC for OEM use. | ||
|  |  * | ||
|  |  * Alauda implements a vendor-specific command set to access two media reader | ||
|  |  * ports (XD, SmartMedia). This driver converts SCSI commands to the commands | ||
|  |  * which are accepted by these devices. | ||
|  |  * | ||
|  |  * The driver was developed through reverse-engineering, with the help of the | ||
|  |  * sddr09 driver which has many similarities, and with some help from the | ||
|  |  * (very old) vendor-supplied GPL sma03 driver. | ||
|  |  * | ||
|  |  * For protocol info, see http://alauda.sourceforge.net
 | ||
|  |  * | ||
|  |  * This program is free software; you can redistribute it and/or modify it | ||
|  |  * under the terms of the GNU General Public License as published by the | ||
|  |  * Free Software Foundation; either version 2, or (at your option) any | ||
|  |  * later version. | ||
|  |  * | ||
|  |  * This program is distributed in the hope that it will be useful, but | ||
|  |  * WITHOUT ANY WARRANTY; without even the implied warranty of | ||
|  |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | ||
|  |  * General Public License for more details. | ||
|  |  * | ||
|  |  * You should have received a copy of the GNU General Public License along | ||
|  |  * with this program; if not, write to the Free Software Foundation, Inc., | ||
|  |  * 675 Mass Ave, Cambridge, MA 02139, USA. | ||
|  |  */ | ||
|  | 
 | ||
|  | #include <scsi/scsi.h>
 | ||
|  | #include <scsi/scsi_cmnd.h>
 | ||
|  | #include <scsi/scsi_device.h>
 | ||
|  | 
 | ||
|  | #include "usb.h"
 | ||
|  | #include "transport.h"
 | ||
|  | #include "protocol.h"
 | ||
|  | #include "debug.h"
 | ||
|  | #include "alauda.h"
 | ||
|  | 
 | ||
|  | #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
 | ||
|  | #define LSB_of(s) ((s)&0xFF)
 | ||
|  | #define MSB_of(s) ((s)>>8)
 | ||
|  | 
 | ||
|  | #define MEDIA_PORT(us) us->srb->device->lun
 | ||
|  | #define MEDIA_INFO(us) ((struct alauda_info *)us->extra)->port[MEDIA_PORT(us)]
 | ||
|  | 
 | ||
|  | #define PBA_LO(pba) ((pba & 0xF) << 5)
 | ||
|  | #define PBA_HI(pba) (pba >> 3)
 | ||
|  | #define PBA_ZONE(pba) (pba >> 11)
 | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Media handling | ||
|  |  */ | ||
|  | 
 | ||
|  | struct alauda_card_info { | ||
|  | 	unsigned char id;		/* id byte */ | ||
|  | 	unsigned char chipshift;	/* 1<<cs bytes total capacity */ | ||
|  | 	unsigned char pageshift;	/* 1<<ps bytes in a page */ | ||
|  | 	unsigned char blockshift;	/* 1<<bs pages per block */ | ||
|  | 	unsigned char zoneshift;	/* 1<<zs blocks per zone */ | ||
|  | }; | ||
|  | 
 | ||
|  | static struct alauda_card_info alauda_card_ids[] = { | ||
|  | 	/* NAND flash */ | ||
|  | 	{ 0x6e, 20, 8, 4, 8},	/* 1 MB */ | ||
|  | 	{ 0xe8, 20, 8, 4, 8},	/* 1 MB */ | ||
|  | 	{ 0xec, 20, 8, 4, 8},	/* 1 MB */ | ||
|  | 	{ 0x64, 21, 8, 4, 9}, 	/* 2 MB */ | ||
|  | 	{ 0xea, 21, 8, 4, 9},	/* 2 MB */ | ||
|  | 	{ 0x6b, 22, 9, 4, 9},	/* 4 MB */ | ||
|  | 	{ 0xe3, 22, 9, 4, 9},	/* 4 MB */ | ||
|  | 	{ 0xe5, 22, 9, 4, 9},	/* 4 MB */ | ||
|  | 	{ 0xe6, 23, 9, 4, 10},	/* 8 MB */ | ||
|  | 	{ 0x73, 24, 9, 5, 10},	/* 16 MB */ | ||
|  | 	{ 0x75, 25, 9, 5, 10},	/* 32 MB */ | ||
|  | 	{ 0x76, 26, 9, 5, 10},	/* 64 MB */ | ||
|  | 	{ 0x79, 27, 9, 5, 10},	/* 128 MB */ | ||
|  | 	{ 0x71, 28, 9, 5, 10},	/* 256 MB */ | ||
|  | 
 | ||
|  | 	/* MASK ROM */ | ||
|  | 	{ 0x5d, 21, 9, 4, 8},	/* 2 MB */ | ||
|  | 	{ 0xd5, 22, 9, 4, 9},	/* 4 MB */ | ||
|  | 	{ 0xd6, 23, 9, 4, 10},	/* 8 MB */ | ||
|  | 	{ 0x57, 24, 9, 4, 11},	/* 16 MB */ | ||
|  | 	{ 0x58, 25, 9, 4, 12},	/* 32 MB */ | ||
|  | 	{ 0,} | ||
|  | }; | ||
|  | 
 | ||
|  | static struct alauda_card_info *alauda_card_find_id(unsigned char id) { | ||
|  | 	int i; | ||
|  | 
 | ||
|  | 	for (i = 0; alauda_card_ids[i].id != 0; i++) | ||
|  | 		if (alauda_card_ids[i].id == id) | ||
|  | 			return &(alauda_card_ids[i]); | ||
|  | 	return NULL; | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * ECC computation. | ||
|  |  */ | ||
|  | 
 | ||
|  | static unsigned char parity[256]; | ||
|  | static unsigned char ecc2[256]; | ||
|  | 
 | ||
|  | static void nand_init_ecc(void) { | ||
|  | 	int i, j, a; | ||
|  | 
 | ||
|  | 	parity[0] = 0; | ||
|  | 	for (i = 1; i < 256; i++) | ||
|  | 		parity[i] = (parity[i&(i-1)] ^ 1); | ||
|  | 
 | ||
|  | 	for (i = 0; i < 256; i++) { | ||
|  | 		a = 0; | ||
|  | 		for (j = 0; j < 8; j++) { | ||
|  | 			if (i & (1<<j)) { | ||
|  | 				if ((j & 1) == 0) | ||
|  | 					a ^= 0x04; | ||
|  | 				if ((j & 2) == 0) | ||
|  | 					a ^= 0x10; | ||
|  | 				if ((j & 4) == 0) | ||
|  | 					a ^= 0x40; | ||
|  | 			} | ||
|  | 		} | ||
|  | 		ecc2[i] = ~(a ^ (a<<1) ^ (parity[i] ? 0xa8 : 0)); | ||
|  | 	} | ||
|  | } | ||
|  | 
 | ||
|  | /* compute 3-byte ecc on 256 bytes */ | ||
|  | static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) { | ||
|  | 	int i, j, a; | ||
|  | 	unsigned char par, bit, bits[8]; | ||
|  | 
 | ||
|  | 	par = 0; | ||
|  | 	for (j = 0; j < 8; j++) | ||
|  | 		bits[j] = 0; | ||
|  | 
 | ||
|  | 	/* collect 16 checksum bits */ | ||
|  | 	for (i = 0; i < 256; i++) { | ||
|  | 		par ^= data[i]; | ||
|  | 		bit = parity[data[i]]; | ||
|  | 		for (j = 0; j < 8; j++) | ||
|  | 			if ((i & (1<<j)) == 0) | ||
|  | 				bits[j] ^= bit; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	/* put 4+4+4 = 12 bits in the ecc */ | ||
|  | 	a = (bits[3] << 6) + (bits[2] << 4) + (bits[1] << 2) + bits[0]; | ||
|  | 	ecc[0] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0)); | ||
|  | 
 | ||
|  | 	a = (bits[7] << 6) + (bits[6] << 4) + (bits[5] << 2) + bits[4]; | ||
|  | 	ecc[1] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0)); | ||
|  | 
 | ||
|  | 	ecc[2] = ecc2[par]; | ||
|  | } | ||
|  | 
 | ||
|  | static int nand_compare_ecc(unsigned char *data, unsigned char *ecc) { | ||
|  | 	return (data[0] == ecc[0] && data[1] == ecc[1] && data[2] == ecc[2]); | ||
|  | } | ||
|  | 
 | ||
|  | static void nand_store_ecc(unsigned char *data, unsigned char *ecc) { | ||
|  | 	memcpy(data, ecc, 3); | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Alauda driver | ||
|  |  */ | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Forget our PBA <---> LBA mappings for a particular port | ||
|  |  */ | ||
|  | static void alauda_free_maps (struct alauda_media_info *media_info) | ||
|  | { | ||
|  | 	unsigned int shift = media_info->zoneshift | ||
|  | 		+ media_info->blockshift + media_info->pageshift; | ||
|  | 	unsigned int num_zones = media_info->capacity >> shift; | ||
|  | 	unsigned int i; | ||
|  | 
 | ||
|  | 	if (media_info->lba_to_pba != NULL) | ||
|  | 		for (i = 0; i < num_zones; i++) { | ||
|  | 			kfree(media_info->lba_to_pba[i]); | ||
|  | 			media_info->lba_to_pba[i] = NULL; | ||
|  | 		} | ||
|  | 
 | ||
|  | 	if (media_info->pba_to_lba != NULL) | ||
|  | 		for (i = 0; i < num_zones; i++) { | ||
|  | 			kfree(media_info->pba_to_lba[i]); | ||
|  | 			media_info->pba_to_lba[i] = NULL; | ||
|  | 		} | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Returns 2 bytes of status data | ||
|  |  * The first byte describes media status, and second byte describes door status | ||
|  |  */ | ||
|  | static int alauda_get_media_status(struct us_data *us, unsigned char *data) | ||
|  | { | ||
|  | 	int rc; | ||
|  | 	unsigned char command; | ||
|  | 
 | ||
|  | 	if (MEDIA_PORT(us) == ALAUDA_PORT_XD) | ||
|  | 		command = ALAUDA_GET_XD_MEDIA_STATUS; | ||
|  | 	else | ||
|  | 		command = ALAUDA_GET_SM_MEDIA_STATUS; | ||
|  | 
 | ||
|  | 	rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe, | ||
|  | 		command, 0xc0, 0, 1, data, 2); | ||
|  | 
 | ||
|  | 	US_DEBUGP("alauda_get_media_status: Media status %02X %02X\n", | ||
|  | 		data[0], data[1]); | ||
|  | 
 | ||
|  | 	return rc; | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Clears the "media was changed" bit so that we know when it changes again | ||
|  |  * in the future. | ||
|  |  */ | ||
|  | static int alauda_ack_media(struct us_data *us) | ||
|  | { | ||
|  | 	unsigned char command; | ||
|  | 
 | ||
|  | 	if (MEDIA_PORT(us) == ALAUDA_PORT_XD) | ||
|  | 		command = ALAUDA_ACK_XD_MEDIA_CHANGE; | ||
|  | 	else | ||
|  | 		command = ALAUDA_ACK_SM_MEDIA_CHANGE; | ||
|  | 
 | ||
|  | 	return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, | ||
|  | 		command, 0x40, 0, 1, NULL, 0); | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Retrieves a 4-byte media signature, which indicates manufacturer, capacity, | ||
|  |  * and some other details. | ||
|  |  */ | ||
|  | static int alauda_get_media_signature(struct us_data *us, unsigned char *data) | ||
|  | { | ||
|  | 	unsigned char command; | ||
|  | 
 | ||
|  | 	if (MEDIA_PORT(us) == ALAUDA_PORT_XD) | ||
|  | 		command = ALAUDA_GET_XD_MEDIA_SIG; | ||
|  | 	else | ||
|  | 		command = ALAUDA_GET_SM_MEDIA_SIG; | ||
|  | 
 | ||
|  | 	return usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe, | ||
|  | 		command, 0xc0, 0, 0, data, 4); | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Resets the media status (but not the whole device?) | ||
|  |  */ | ||
|  | static int alauda_reset_media(struct us_data *us) | ||
|  | { | ||
|  | 	unsigned char *command = us->iobuf; | ||
|  | 
 | ||
|  | 	memset(command, 0, 9); | ||
|  | 	command[0] = ALAUDA_BULK_CMD; | ||
|  | 	command[1] = ALAUDA_BULK_RESET_MEDIA; | ||
|  | 	command[8] = MEDIA_PORT(us); | ||
|  | 
 | ||
|  | 	return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, | ||
|  | 		command, 9, NULL); | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Examines the media and deduces capacity, etc. | ||
|  |  */ | ||
|  | static int alauda_init_media(struct us_data *us) | ||
|  | { | ||
|  | 	unsigned char *data = us->iobuf; | ||
|  | 	int ready = 0; | ||
|  | 	struct alauda_card_info *media_info; | ||
|  | 	unsigned int num_zones; | ||
|  | 
 | ||
|  | 	while (ready == 0) { | ||
|  | 		msleep(20); | ||
|  | 
 | ||
|  | 		if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD) | ||
|  | 			return USB_STOR_TRANSPORT_ERROR; | ||
|  | 
 | ||
|  | 		if (data[0] & 0x10) | ||
|  | 			ready = 1; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	US_DEBUGP("alauda_init_media: We are ready for action!\n"); | ||
|  | 
 | ||
|  | 	if (alauda_ack_media(us) != USB_STOR_XFER_GOOD) | ||
|  | 		return USB_STOR_TRANSPORT_ERROR; | ||
|  | 
 | ||
|  | 	msleep(10); | ||
|  | 
 | ||
|  | 	if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD) | ||
|  | 		return USB_STOR_TRANSPORT_ERROR; | ||
|  | 
 | ||
|  | 	if (data[0] != 0x14) { | ||
|  | 		US_DEBUGP("alauda_init_media: Media not ready after ack\n"); | ||
|  | 		return USB_STOR_TRANSPORT_ERROR; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	if (alauda_get_media_signature(us, data) != USB_STOR_XFER_GOOD) | ||
|  | 		return USB_STOR_TRANSPORT_ERROR; | ||
|  | 
 | ||
|  | 	US_DEBUGP("alauda_init_media: Media signature: %02X %02X %02X %02X\n", | ||
|  | 		data[0], data[1], data[2], data[3]); | ||
|  | 	media_info = alauda_card_find_id(data[1]); | ||
|  | 	if (media_info == NULL) { | ||
|  | 		printk("alauda_init_media: Unrecognised media signature: " | ||
|  | 			"%02X %02X %02X %02X\n", | ||
|  | 			data[0], data[1], data[2], data[3]); | ||
|  | 		return USB_STOR_TRANSPORT_ERROR; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	MEDIA_INFO(us).capacity = 1 << media_info->chipshift; | ||
|  | 	US_DEBUGP("Found media with capacity: %ldMB\n", | ||
|  | 		MEDIA_INFO(us).capacity >> 20); | ||
|  | 
 | ||
|  | 	MEDIA_INFO(us).pageshift = media_info->pageshift; | ||
|  | 	MEDIA_INFO(us).blockshift = media_info->blockshift; | ||
|  | 	MEDIA_INFO(us).zoneshift = media_info->zoneshift; | ||
|  | 
 | ||
|  | 	MEDIA_INFO(us).pagesize = 1 << media_info->pageshift; | ||
|  | 	MEDIA_INFO(us).blocksize = 1 << media_info->blockshift; | ||
|  | 	MEDIA_INFO(us).zonesize = 1 << media_info->zoneshift; | ||
|  | 
 | ||
|  | 	MEDIA_INFO(us).uzonesize = ((1 << media_info->zoneshift) / 128) * 125; | ||
|  | 	MEDIA_INFO(us).blockmask = MEDIA_INFO(us).blocksize - 1; | ||
|  | 
 | ||
|  | 	num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift | ||
|  | 		+ MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift); | ||
|  | 	MEDIA_INFO(us).pba_to_lba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO); | ||
|  | 	MEDIA_INFO(us).lba_to_pba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO); | ||
|  | 
 | ||
|  | 	if (alauda_reset_media(us) != USB_STOR_XFER_GOOD) | ||
|  | 		return USB_STOR_TRANSPORT_ERROR; | ||
|  | 
 | ||
|  | 	return USB_STOR_TRANSPORT_GOOD; | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Examines the media status and does the right thing when the media has gone, | ||
|  |  * appeared, or changed. | ||
|  |  */ | ||
|  | static int alauda_check_media(struct us_data *us) | ||
|  | { | ||
|  | 	struct alauda_info *info = (struct alauda_info *) us->extra; | ||
|  | 	unsigned char status[2]; | ||
|  | 	int rc; | ||
|  | 
 | ||
|  | 	rc = alauda_get_media_status(us, status); | ||
|  | 
 | ||
|  | 	/* Check for no media or door open */ | ||
|  | 	if ((status[0] & 0x80) || ((status[0] & 0x1F) == 0x10) | ||
|  | 		|| ((status[1] & 0x01) == 0)) { | ||
|  | 		US_DEBUGP("alauda_check_media: No media, or door open\n"); | ||
|  | 		alauda_free_maps(&MEDIA_INFO(us)); | ||
|  | 		info->sense_key = 0x02; | ||
|  | 		info->sense_asc = 0x3A; | ||
|  | 		info->sense_ascq = 0x00; | ||
|  | 		return USB_STOR_TRANSPORT_FAILED; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	/* Check for media change */ | ||
|  | 	if (status[0] & 0x08) { | ||
|  | 		US_DEBUGP("alauda_check_media: Media change detected\n"); | ||
|  | 		alauda_free_maps(&MEDIA_INFO(us)); | ||
|  | 		alauda_init_media(us); | ||
|  | 
 | ||
|  | 		info->sense_key = UNIT_ATTENTION; | ||
|  | 		info->sense_asc = 0x28; | ||
|  | 		info->sense_ascq = 0x00; | ||
|  | 		return USB_STOR_TRANSPORT_FAILED; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	return USB_STOR_TRANSPORT_GOOD; | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Checks the status from the 2nd status register | ||
|  |  * Returns 3 bytes of status data, only the first is known | ||
|  |  */ | ||
|  | static int alauda_check_status2(struct us_data *us) | ||
|  | { | ||
|  | 	int rc; | ||
|  | 	unsigned char command[] = { | ||
|  | 		ALAUDA_BULK_CMD, ALAUDA_BULK_GET_STATUS2, | ||
|  | 		0, 0, 0, 0, 3, 0, MEDIA_PORT(us) | ||
|  | 	}; | ||
|  | 	unsigned char data[3]; | ||
|  | 
 | ||
|  | 	rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, | ||
|  | 		command, 9, NULL); | ||
|  | 	if (rc != USB_STOR_XFER_GOOD) | ||
|  | 		return rc; | ||
|  | 
 | ||
|  | 	rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, | ||
|  | 		data, 3, NULL); | ||
|  | 	if (rc != USB_STOR_XFER_GOOD) | ||
|  | 		return rc; | ||
|  | 
 | ||
|  | 	US_DEBUGP("alauda_check_status2: %02X %02X %02X\n", data[0], data[1], data[2]); | ||
|  | 	if (data[0] & ALAUDA_STATUS_ERROR) | ||
|  | 		return USB_STOR_XFER_ERROR; | ||
|  | 
 | ||
|  | 	return USB_STOR_XFER_GOOD; | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Gets the redundancy data for the first page of a PBA | ||
|  |  * Returns 16 bytes. | ||
|  |  */ | ||
|  | static int alauda_get_redu_data(struct us_data *us, u16 pba, unsigned char *data) | ||
|  | { | ||
|  | 	int rc; | ||
|  | 	unsigned char command[] = { | ||
|  | 		ALAUDA_BULK_CMD, ALAUDA_BULK_GET_REDU_DATA, | ||
|  | 		PBA_HI(pba), PBA_ZONE(pba), 0, PBA_LO(pba), 0, 0, MEDIA_PORT(us) | ||
|  | 	}; | ||
|  | 
 | ||
|  | 	rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, | ||
|  | 		command, 9, NULL); | ||
|  | 	if (rc != USB_STOR_XFER_GOOD) | ||
|  | 		return rc; | ||
|  | 
 | ||
|  | 	return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, | ||
|  | 		data, 16, NULL); | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Finds the first unused PBA in a zone | ||
|  |  * Returns the absolute PBA of an unused PBA, or 0 if none found. | ||
|  |  */ | ||
|  | static u16 alauda_find_unused_pba(struct alauda_media_info *info, | ||
|  | 	unsigned int zone) | ||
|  | { | ||
|  | 	u16 *pba_to_lba = info->pba_to_lba[zone]; | ||
|  | 	unsigned int i; | ||
|  | 
 | ||
|  | 	for (i = 0; i < info->zonesize; i++) | ||
|  | 		if (pba_to_lba[i] == UNDEF) | ||
|  | 			return (zone << info->zoneshift) + i; | ||
|  | 
 | ||
|  | 	return 0; | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Reads the redundancy data for all PBA's in a zone | ||
|  |  * Produces lba <--> pba mappings | ||
|  |  */ | ||
|  | static int alauda_read_map(struct us_data *us, unsigned int zone) | ||
|  | { | ||
|  | 	unsigned char *data = us->iobuf; | ||
|  | 	int result; | ||
|  | 	int i, j; | ||
|  | 	unsigned int zonesize = MEDIA_INFO(us).zonesize; | ||
|  | 	unsigned int uzonesize = MEDIA_INFO(us).uzonesize; | ||
|  | 	unsigned int lba_offset, lba_real, blocknum; | ||
|  | 	unsigned int zone_base_lba = zone * uzonesize; | ||
|  | 	unsigned int zone_base_pba = zone * zonesize; | ||
|  | 	u16 *lba_to_pba = kcalloc(zonesize, sizeof(u16), GFP_NOIO); | ||
|  | 	u16 *pba_to_lba = kcalloc(zonesize, sizeof(u16), GFP_NOIO); | ||
|  | 	if (lba_to_pba == NULL || pba_to_lba == NULL) { | ||
|  | 		result = USB_STOR_TRANSPORT_ERROR; | ||
|  | 		goto error; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	US_DEBUGP("alauda_read_map: Mapping blocks for zone %d\n", zone); | ||
|  | 
 | ||
|  | 	/* 1024 PBA's per zone */ | ||
|  | 	for (i = 0; i < zonesize; i++) | ||
|  | 		lba_to_pba[i] = pba_to_lba[i] = UNDEF; | ||
|  | 
 | ||
|  | 	for (i = 0; i < zonesize; i++) { | ||
|  | 		blocknum = zone_base_pba + i; | ||
|  | 
 | ||
|  | 		result = alauda_get_redu_data(us, blocknum, data); | ||
|  | 		if (result != USB_STOR_XFER_GOOD) { | ||
|  | 			result = USB_STOR_TRANSPORT_ERROR; | ||
|  | 			goto error; | ||
|  | 		} | ||
|  | 
 | ||
|  | 		/* special PBAs have control field 0^16 */ | ||
|  | 		for (j = 0; j < 16; j++) | ||
|  | 			if (data[j] != 0) | ||
|  | 				goto nonz; | ||
|  | 		pba_to_lba[i] = UNUSABLE; | ||
|  | 		US_DEBUGP("alauda_read_map: PBA %d has no logical mapping\n", blocknum); | ||
|  | 		continue; | ||
|  | 
 | ||
|  | 	nonz: | ||
|  | 		/* unwritten PBAs have control field FF^16 */ | ||
|  | 		for (j = 0; j < 16; j++) | ||
|  | 			if (data[j] != 0xff) | ||
|  | 				goto nonff; | ||
|  | 		continue; | ||
|  | 
 | ||
|  | 	nonff: | ||
|  | 		/* normal PBAs start with six FFs */ | ||
|  | 		if (j < 6) { | ||
|  | 			US_DEBUGP("alauda_read_map: PBA %d has no logical mapping: " | ||
|  | 			       "reserved area = %02X%02X%02X%02X " | ||
|  | 			       "data status %02X block status %02X\n", | ||
|  | 			       blocknum, data[0], data[1], data[2], data[3], | ||
|  | 			       data[4], data[5]); | ||
|  | 			pba_to_lba[i] = UNUSABLE; | ||
|  | 			continue; | ||
|  | 		} | ||
|  | 
 | ||
|  | 		if ((data[6] >> 4) != 0x01) { | ||
|  | 			US_DEBUGP("alauda_read_map: PBA %d has invalid address " | ||
|  | 			       "field %02X%02X/%02X%02X\n", | ||
|  | 			       blocknum, data[6], data[7], data[11], data[12]); | ||
|  | 			pba_to_lba[i] = UNUSABLE; | ||
|  | 			continue; | ||
|  | 		} | ||
|  | 
 | ||
|  | 		/* check even parity */ | ||
|  | 		if (parity[data[6] ^ data[7]]) { | ||
|  | 			printk("alauda_read_map: Bad parity in LBA for block %d" | ||
|  | 			       " (%02X %02X)\n", i, data[6], data[7]); | ||
|  | 			pba_to_lba[i] = UNUSABLE; | ||
|  | 			continue; | ||
|  | 		} | ||
|  | 
 | ||
|  | 		lba_offset = short_pack(data[7], data[6]); | ||
|  | 		lba_offset = (lba_offset & 0x07FF) >> 1; | ||
|  | 		lba_real = lba_offset + zone_base_lba; | ||
|  | 
 | ||
|  | 		/*
 | ||
|  | 		 * Every 1024 physical blocks ("zone"), the LBA numbers | ||
|  | 		 * go back to zero, but are within a higher block of LBA's. | ||
|  | 		 * Also, there is a maximum of 1000 LBA's per zone. | ||
|  | 		 * In other words, in PBA 1024-2047 you will find LBA 0-999 | ||
|  | 		 * which are really LBA 1000-1999. This allows for 24 bad | ||
|  | 		 * or special physical blocks per zone. | ||
|  | 		 */ | ||
|  | 
 | ||
|  | 		if (lba_offset >= uzonesize) { | ||
|  | 			printk("alauda_read_map: Bad low LBA %d for block %d\n", | ||
|  | 			       lba_real, blocknum); | ||
|  | 			continue; | ||
|  | 		} | ||
|  | 
 | ||
|  | 		if (lba_to_pba[lba_offset] != UNDEF) { | ||
|  | 			printk("alauda_read_map: LBA %d seen for PBA %d and %d\n", | ||
|  | 			       lba_real, lba_to_pba[lba_offset], blocknum); | ||
|  | 			continue; | ||
|  | 		} | ||
|  | 
 | ||
|  | 		pba_to_lba[i] = lba_real; | ||
|  | 		lba_to_pba[lba_offset] = blocknum; | ||
|  | 		continue; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	MEDIA_INFO(us).lba_to_pba[zone] = lba_to_pba; | ||
|  | 	MEDIA_INFO(us).pba_to_lba[zone] = pba_to_lba; | ||
|  | 	result = 0; | ||
|  | 	goto out; | ||
|  | 
 | ||
|  | error: | ||
|  | 	kfree(lba_to_pba); | ||
|  | 	kfree(pba_to_lba); | ||
|  | out: | ||
|  | 	return result; | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Checks to see whether we have already mapped a certain zone | ||
|  |  * If we haven't, the map is generated | ||
|  |  */ | ||
|  | static void alauda_ensure_map_for_zone(struct us_data *us, unsigned int zone) | ||
|  | { | ||
|  | 	if (MEDIA_INFO(us).lba_to_pba[zone] == NULL | ||
|  | 		|| MEDIA_INFO(us).pba_to_lba[zone] == NULL) | ||
|  | 		alauda_read_map(us, zone); | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Erases an entire block | ||
|  |  */ | ||
|  | static int alauda_erase_block(struct us_data *us, u16 pba) | ||
|  | { | ||
|  | 	int rc; | ||
|  | 	unsigned char command[] = { | ||
|  | 		ALAUDA_BULK_CMD, ALAUDA_BULK_ERASE_BLOCK, PBA_HI(pba), | ||
|  | 		PBA_ZONE(pba), 0, PBA_LO(pba), 0x02, 0, MEDIA_PORT(us) | ||
|  | 	}; | ||
|  | 	unsigned char buf[2]; | ||
|  | 
 | ||
|  | 	US_DEBUGP("alauda_erase_block: Erasing PBA %d\n", pba); | ||
|  | 
 | ||
|  | 	rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, | ||
|  | 		command, 9, NULL); | ||
|  | 	if (rc != USB_STOR_XFER_GOOD) | ||
|  | 		return rc; | ||
|  | 
 | ||
|  | 	rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, | ||
|  | 		buf, 2, NULL); | ||
|  | 	if (rc != USB_STOR_XFER_GOOD) | ||
|  | 		return rc; | ||
|  | 
 | ||
|  | 	US_DEBUGP("alauda_erase_block: Erase result: %02X %02X\n", | ||
|  | 		buf[0], buf[1]); | ||
|  | 	return rc; | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Reads data from a certain offset page inside a PBA, including interleaved | ||
|  |  * redundancy data. Returns (pagesize+64)*pages bytes in data. | ||
|  |  */ | ||
|  | static int alauda_read_block_raw(struct us_data *us, u16 pba, | ||
|  | 		unsigned int page, unsigned int pages, unsigned char *data) | ||
|  | { | ||
|  | 	int rc; | ||
|  | 	unsigned char command[] = { | ||
|  | 		ALAUDA_BULK_CMD, ALAUDA_BULK_READ_BLOCK, PBA_HI(pba), | ||
|  | 		PBA_ZONE(pba), 0, PBA_LO(pba) + page, pages, 0, MEDIA_PORT(us) | ||
|  | 	}; | ||
|  | 
 | ||
|  | 	US_DEBUGP("alauda_read_block: pba %d page %d count %d\n", | ||
|  | 		pba, page, pages); | ||
|  | 
 | ||
|  | 	rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, | ||
|  | 		command, 9, NULL); | ||
|  | 	if (rc != USB_STOR_XFER_GOOD) | ||
|  | 		return rc; | ||
|  | 
 | ||
|  | 	return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, | ||
|  | 		data, (MEDIA_INFO(us).pagesize + 64) * pages, NULL); | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Reads data from a certain offset page inside a PBA, excluding redundancy | ||
|  |  * data. Returns pagesize*pages bytes in data. Note that data must be big enough | ||
|  |  * to hold (pagesize+64)*pages bytes of data, but you can ignore those 'extra' | ||
|  |  * trailing bytes outside this function. | ||
|  |  */ | ||
|  | static int alauda_read_block(struct us_data *us, u16 pba, | ||
|  | 		unsigned int page, unsigned int pages, unsigned char *data) | ||
|  | { | ||
|  | 	int i, rc; | ||
|  | 	unsigned int pagesize = MEDIA_INFO(us).pagesize; | ||
|  | 
 | ||
|  | 	rc = alauda_read_block_raw(us, pba, page, pages, data); | ||
|  | 	if (rc != USB_STOR_XFER_GOOD) | ||
|  | 		return rc; | ||
|  | 
 | ||
|  | 	/* Cut out the redundancy data */ | ||
|  | 	for (i = 0; i < pages; i++) { | ||
|  | 		int dest_offset = i * pagesize; | ||
|  | 		int src_offset = i * (pagesize + 64); | ||
|  | 		memmove(data + dest_offset, data + src_offset, pagesize); | ||
|  | 	} | ||
|  | 
 | ||
|  | 	return rc; | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Writes an entire block of data and checks status after write. | ||
|  |  * Redundancy data must be already included in data. Data should be | ||
|  |  * (pagesize+64)*blocksize bytes in length. | ||
|  |  */ | ||
|  | static int alauda_write_block(struct us_data *us, u16 pba, unsigned char *data) | ||
|  | { | ||
|  | 	int rc; | ||
|  | 	struct alauda_info *info = (struct alauda_info *) us->extra; | ||
|  | 	unsigned char command[] = { | ||
|  | 		ALAUDA_BULK_CMD, ALAUDA_BULK_WRITE_BLOCK, PBA_HI(pba), | ||
|  | 		PBA_ZONE(pba), 0, PBA_LO(pba), 32, 0, MEDIA_PORT(us) | ||
|  | 	}; | ||
|  | 
 | ||
|  | 	US_DEBUGP("alauda_write_block: pba %d\n", pba); | ||
|  | 
 | ||
|  | 	rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, | ||
|  | 		command, 9, NULL); | ||
|  | 	if (rc != USB_STOR_XFER_GOOD) | ||
|  | 		return rc; | ||
|  | 
 | ||
|  | 	rc = usb_stor_bulk_transfer_buf(us, info->wr_ep, data, | ||
|  | 		(MEDIA_INFO(us).pagesize + 64) * MEDIA_INFO(us).blocksize, | ||
|  | 		NULL); | ||
|  | 	if (rc != USB_STOR_XFER_GOOD) | ||
|  | 		return rc; | ||
|  | 
 | ||
|  | 	return alauda_check_status2(us); | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Write some data to a specific LBA. | ||
|  |  */ | ||
|  | static int alauda_write_lba(struct us_data *us, u16 lba, | ||
|  | 		 unsigned int page, unsigned int pages, | ||
|  | 		 unsigned char *ptr, unsigned char *blockbuffer) | ||
|  | { | ||
|  | 	u16 pba, lbap, new_pba; | ||
|  | 	unsigned char *bptr, *cptr, *xptr; | ||
|  | 	unsigned char ecc[3]; | ||
|  | 	int i, result; | ||
|  | 	unsigned int uzonesize = MEDIA_INFO(us).uzonesize; | ||
|  | 	unsigned int zonesize = MEDIA_INFO(us).zonesize; | ||
|  | 	unsigned int pagesize = MEDIA_INFO(us).pagesize; | ||
|  | 	unsigned int blocksize = MEDIA_INFO(us).blocksize; | ||
|  | 	unsigned int lba_offset = lba % uzonesize; | ||
|  | 	unsigned int new_pba_offset; | ||
|  | 	unsigned int zone = lba / uzonesize; | ||
|  | 
 | ||
|  | 	alauda_ensure_map_for_zone(us, zone); | ||
|  | 
 | ||
|  | 	pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset]; | ||
|  | 	if (pba == 1) { | ||
|  | 		/* Maybe it is impossible to write to PBA 1.
 | ||
|  | 		   Fake success, but don't do anything. */ | ||
|  | 		printk("alauda_write_lba: avoid writing to pba 1\n"); | ||
|  | 		return USB_STOR_TRANSPORT_GOOD; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	new_pba = alauda_find_unused_pba(&MEDIA_INFO(us), zone); | ||
|  | 	if (!new_pba) { | ||
|  | 		printk("alauda_write_lba: Out of unused blocks\n"); | ||
|  | 		return USB_STOR_TRANSPORT_ERROR; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	/* read old contents */ | ||
|  | 	if (pba != UNDEF) { | ||
|  | 		result = alauda_read_block_raw(us, pba, 0, | ||
|  | 			blocksize, blockbuffer); | ||
|  | 		if (result != USB_STOR_XFER_GOOD) | ||
|  | 			return result; | ||
|  | 	} else { | ||
|  | 		memset(blockbuffer, 0, blocksize * (pagesize + 64)); | ||
|  | 	} | ||
|  | 
 | ||
|  | 	lbap = (lba_offset << 1) | 0x1000; | ||
|  | 	if (parity[MSB_of(lbap) ^ LSB_of(lbap)]) | ||
|  | 		lbap ^= 1; | ||
|  | 
 | ||
|  | 	/* check old contents and fill lba */ | ||
|  | 	for (i = 0; i < blocksize; i++) { | ||
|  | 		bptr = blockbuffer + (i * (pagesize + 64)); | ||
|  | 		cptr = bptr + pagesize; | ||
|  | 		nand_compute_ecc(bptr, ecc); | ||
|  | 		if (!nand_compare_ecc(cptr+13, ecc)) { | ||
|  | 			US_DEBUGP("Warning: bad ecc in page %d- of pba %d\n", | ||
|  | 				  i, pba); | ||
|  | 			nand_store_ecc(cptr+13, ecc); | ||
|  | 		} | ||
|  | 		nand_compute_ecc(bptr + (pagesize / 2), ecc); | ||
|  | 		if (!nand_compare_ecc(cptr+8, ecc)) { | ||
|  | 			US_DEBUGP("Warning: bad ecc in page %d+ of pba %d\n", | ||
|  | 				  i, pba); | ||
|  | 			nand_store_ecc(cptr+8, ecc); | ||
|  | 		} | ||
|  | 		cptr[6] = cptr[11] = MSB_of(lbap); | ||
|  | 		cptr[7] = cptr[12] = LSB_of(lbap); | ||
|  | 	} | ||
|  | 
 | ||
|  | 	/* copy in new stuff and compute ECC */ | ||
|  | 	xptr = ptr; | ||
|  | 	for (i = page; i < page+pages; i++) { | ||
|  | 		bptr = blockbuffer + (i * (pagesize + 64)); | ||
|  | 		cptr = bptr + pagesize; | ||
|  | 		memcpy(bptr, xptr, pagesize); | ||
|  | 		xptr += pagesize; | ||
|  | 		nand_compute_ecc(bptr, ecc); | ||
|  | 		nand_store_ecc(cptr+13, ecc); | ||
|  | 		nand_compute_ecc(bptr + (pagesize / 2), ecc); | ||
|  | 		nand_store_ecc(cptr+8, ecc); | ||
|  | 	} | ||
|  | 
 | ||
|  | 	result = alauda_write_block(us, new_pba, blockbuffer); | ||
|  | 	if (result != USB_STOR_XFER_GOOD) | ||
|  | 		return result; | ||
|  | 
 | ||
|  | 	new_pba_offset = new_pba - (zone * zonesize); | ||
|  | 	MEDIA_INFO(us).pba_to_lba[zone][new_pba_offset] = lba; | ||
|  | 	MEDIA_INFO(us).lba_to_pba[zone][lba_offset] = new_pba; | ||
|  | 	US_DEBUGP("alauda_write_lba: Remapped LBA %d to PBA %d\n", | ||
|  | 		lba, new_pba); | ||
|  | 
 | ||
|  | 	if (pba != UNDEF) { | ||
|  | 		unsigned int pba_offset = pba - (zone * zonesize); | ||
|  | 		result = alauda_erase_block(us, pba); | ||
|  | 		if (result != USB_STOR_XFER_GOOD) | ||
|  | 			return result; | ||
|  | 		MEDIA_INFO(us).pba_to_lba[zone][pba_offset] = UNDEF; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	return USB_STOR_TRANSPORT_GOOD; | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Read data from a specific sector address | ||
|  |  */ | ||
|  | static int alauda_read_data(struct us_data *us, unsigned long address, | ||
|  | 		unsigned int sectors) | ||
|  | { | ||
|  | 	unsigned char *buffer; | ||
|  | 	u16 lba, max_lba; | ||
|  | 	unsigned int page, len, index, offset; | ||
|  | 	unsigned int blockshift = MEDIA_INFO(us).blockshift; | ||
|  | 	unsigned int pageshift = MEDIA_INFO(us).pageshift; | ||
|  | 	unsigned int blocksize = MEDIA_INFO(us).blocksize; | ||
|  | 	unsigned int pagesize = MEDIA_INFO(us).pagesize; | ||
|  | 	unsigned int uzonesize = MEDIA_INFO(us).uzonesize; | ||
|  | 	int result; | ||
|  | 
 | ||
|  | 	/*
 | ||
|  | 	 * Since we only read in one block at a time, we have to create | ||
|  | 	 * a bounce buffer and move the data a piece at a time between the | ||
|  | 	 * bounce buffer and the actual transfer buffer. | ||
|  | 	 * We make this buffer big enough to hold temporary redundancy data, | ||
|  | 	 * which we use when reading the data blocks. | ||
|  | 	 */ | ||
|  | 
 | ||
|  | 	len = min(sectors, blocksize) * (pagesize + 64); | ||
|  | 	buffer = kmalloc(len, GFP_NOIO); | ||
|  | 	if (buffer == NULL) { | ||
|  | 		printk("alauda_read_data: Out of memory\n"); | ||
|  | 		return USB_STOR_TRANSPORT_ERROR; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	/* Figure out the initial LBA and page */ | ||
|  | 	lba = address >> blockshift; | ||
|  | 	page = (address & MEDIA_INFO(us).blockmask); | ||
|  | 	max_lba = MEDIA_INFO(us).capacity >> (blockshift + pageshift); | ||
|  | 
 | ||
|  | 	result = USB_STOR_TRANSPORT_GOOD; | ||
|  | 	index = offset = 0; | ||
|  | 
 | ||
|  | 	while (sectors > 0) { | ||
|  | 		unsigned int zone = lba / uzonesize; /* integer division */ | ||
|  | 		unsigned int lba_offset = lba - (zone * uzonesize); | ||
|  | 		unsigned int pages; | ||
|  | 		u16 pba; | ||
|  | 		alauda_ensure_map_for_zone(us, zone); | ||
|  | 
 | ||
|  | 		/* Not overflowing capacity? */ | ||
|  | 		if (lba >= max_lba) { | ||
|  | 			US_DEBUGP("Error: Requested lba %u exceeds " | ||
|  | 				  "maximum %u\n", lba, max_lba); | ||
|  | 			result = USB_STOR_TRANSPORT_ERROR; | ||
|  | 			break; | ||
|  | 		} | ||
|  | 
 | ||
|  | 		/* Find number of pages we can read in this block */ | ||
|  | 		pages = min(sectors, blocksize - page); | ||
|  | 		len = pages << pageshift; | ||
|  | 
 | ||
|  | 		/* Find where this lba lives on disk */ | ||
|  | 		pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset]; | ||
|  | 
 | ||
|  | 		if (pba == UNDEF) {	/* this lba was never written */ | ||
|  | 			US_DEBUGP("Read %d zero pages (LBA %d) page %d\n", | ||
|  | 				  pages, lba, page); | ||
|  | 
 | ||
|  | 			/* This is not really an error. It just means
 | ||
|  | 			   that the block has never been written. | ||
|  | 			   Instead of returning USB_STOR_TRANSPORT_ERROR | ||
|  | 			   it is better to return all zero data. */ | ||
|  | 
 | ||
|  | 			memset(buffer, 0, len); | ||
|  | 		} else { | ||
|  | 			US_DEBUGP("Read %d pages, from PBA %d" | ||
|  | 				  " (LBA %d) page %d\n", | ||
|  | 				  pages, pba, lba, page); | ||
|  | 
 | ||
|  | 			result = alauda_read_block(us, pba, page, pages, buffer); | ||
|  | 			if (result != USB_STOR_TRANSPORT_GOOD) | ||
|  | 				break; | ||
|  | 		} | ||
|  | 
 | ||
|  | 		/* Store the data in the transfer buffer */ | ||
|  | 		usb_stor_access_xfer_buf(buffer, len, us->srb, | ||
|  | 				&index, &offset, TO_XFER_BUF); | ||
|  | 
 | ||
|  | 		page = 0; | ||
|  | 		lba++; | ||
|  | 		sectors -= pages; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	kfree(buffer); | ||
|  | 	return result; | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Write data to a specific sector address | ||
|  |  */ | ||
|  | static int alauda_write_data(struct us_data *us, unsigned long address, | ||
|  | 		unsigned int sectors) | ||
|  | { | ||
|  | 	unsigned char *buffer, *blockbuffer; | ||
|  | 	unsigned int page, len, index, offset; | ||
|  | 	unsigned int blockshift = MEDIA_INFO(us).blockshift; | ||
|  | 	unsigned int pageshift = MEDIA_INFO(us).pageshift; | ||
|  | 	unsigned int blocksize = MEDIA_INFO(us).blocksize; | ||
|  | 	unsigned int pagesize = MEDIA_INFO(us).pagesize; | ||
|  | 	u16 lba, max_lba; | ||
|  | 	int result; | ||
|  | 
 | ||
|  | 	/*
 | ||
|  | 	 * Since we don't write the user data directly to the device, | ||
|  | 	 * we have to create a bounce buffer and move the data a piece | ||
|  | 	 * at a time between the bounce buffer and the actual transfer buffer. | ||
|  | 	 */ | ||
|  | 
 | ||
|  | 	len = min(sectors, blocksize) * pagesize; | ||
|  | 	buffer = kmalloc(len, GFP_NOIO); | ||
|  | 	if (buffer == NULL) { | ||
|  | 		printk("alauda_write_data: Out of memory\n"); | ||
|  | 		return USB_STOR_TRANSPORT_ERROR; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	/*
 | ||
|  | 	 * We also need a temporary block buffer, where we read in the old data, | ||
|  | 	 * overwrite parts with the new data, and manipulate the redundancy data | ||
|  | 	 */ | ||
|  | 	blockbuffer = kmalloc((pagesize + 64) * blocksize, GFP_NOIO); | ||
|  | 	if (blockbuffer == NULL) { | ||
|  | 		printk("alauda_write_data: Out of memory\n"); | ||
|  | 		kfree(buffer); | ||
|  | 		return USB_STOR_TRANSPORT_ERROR; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	/* Figure out the initial LBA and page */ | ||
|  | 	lba = address >> blockshift; | ||
|  | 	page = (address & MEDIA_INFO(us).blockmask); | ||
|  | 	max_lba = MEDIA_INFO(us).capacity >> (pageshift + blockshift); | ||
|  | 
 | ||
|  | 	result = USB_STOR_TRANSPORT_GOOD; | ||
|  | 	index = offset = 0; | ||
|  | 
 | ||
|  | 	while (sectors > 0) { | ||
|  | 		/* Write as many sectors as possible in this block */ | ||
|  | 		unsigned int pages = min(sectors, blocksize - page); | ||
|  | 		len = pages << pageshift; | ||
|  | 
 | ||
|  | 		/* Not overflowing capacity? */ | ||
|  | 		if (lba >= max_lba) { | ||
|  | 			US_DEBUGP("alauda_write_data: Requested lba %u exceeds " | ||
|  | 				  "maximum %u\n", lba, max_lba); | ||
|  | 			result = USB_STOR_TRANSPORT_ERROR; | ||
|  | 			break; | ||
|  | 		} | ||
|  | 
 | ||
|  | 		/* Get the data from the transfer buffer */ | ||
|  | 		usb_stor_access_xfer_buf(buffer, len, us->srb, | ||
|  | 				&index, &offset, FROM_XFER_BUF); | ||
|  | 
 | ||
|  | 		result = alauda_write_lba(us, lba, page, pages, buffer, | ||
|  | 			blockbuffer); | ||
|  | 		if (result != USB_STOR_TRANSPORT_GOOD) | ||
|  | 			break; | ||
|  | 
 | ||
|  | 		page = 0; | ||
|  | 		lba++; | ||
|  | 		sectors -= pages; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	kfree(buffer); | ||
|  | 	kfree(blockbuffer); | ||
|  | 	return result; | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Our interface with the rest of the world | ||
|  |  */ | ||
|  | 
 | ||
|  | static void alauda_info_destructor(void *extra) | ||
|  | { | ||
|  | 	struct alauda_info *info = (struct alauda_info *) extra; | ||
|  | 	int port; | ||
|  | 
 | ||
|  | 	if (!info) | ||
|  | 		return; | ||
|  | 
 | ||
|  | 	for (port = 0; port < 2; port++) { | ||
|  | 		struct alauda_media_info *media_info = &info->port[port]; | ||
|  | 
 | ||
|  | 		alauda_free_maps(media_info); | ||
|  | 		kfree(media_info->lba_to_pba); | ||
|  | 		kfree(media_info->pba_to_lba); | ||
|  | 	} | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Initialize alauda_info struct and find the data-write endpoint | ||
|  |  */ | ||
|  | int init_alauda(struct us_data *us) | ||
|  | { | ||
|  | 	struct alauda_info *info; | ||
|  | 	struct usb_host_interface *altsetting = us->pusb_intf->cur_altsetting; | ||
|  | 	nand_init_ecc(); | ||
|  | 
 | ||
|  | 	us->extra = kzalloc(sizeof(struct alauda_info), GFP_NOIO); | ||
|  | 	if (!us->extra) { | ||
|  | 		US_DEBUGP("init_alauda: Gah! Can't allocate storage for" | ||
|  | 			"alauda info struct!\n"); | ||
|  | 		return USB_STOR_TRANSPORT_ERROR; | ||
|  | 	} | ||
|  | 	info = (struct alauda_info *) us->extra; | ||
|  | 	us->extra_destructor = alauda_info_destructor; | ||
|  | 
 | ||
|  | 	info->wr_ep = usb_sndbulkpipe(us->pusb_dev, | ||
|  | 		altsetting->endpoint[0].desc.bEndpointAddress | ||
|  | 		& USB_ENDPOINT_NUMBER_MASK); | ||
|  | 
 | ||
|  | 	return USB_STOR_TRANSPORT_GOOD; | ||
|  | } | ||
|  | 
 | ||
|  | int alauda_transport(struct scsi_cmnd *srb, struct us_data *us) | ||
|  | { | ||
|  | 	int rc; | ||
|  | 	struct alauda_info *info = (struct alauda_info *) us->extra; | ||
|  | 	unsigned char *ptr = us->iobuf; | ||
|  | 	static unsigned char inquiry_response[36] = { | ||
|  | 		0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00 | ||
|  | 	}; | ||
|  | 
 | ||
|  | 	if (srb->cmnd[0] == INQUIRY) { | ||
|  | 		US_DEBUGP("alauda_transport: INQUIRY. " | ||
|  | 			"Returning bogus response.\n"); | ||
|  | 		memcpy(ptr, inquiry_response, sizeof(inquiry_response)); | ||
|  | 		fill_inquiry_response(us, ptr, 36); | ||
|  | 		return USB_STOR_TRANSPORT_GOOD; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	if (srb->cmnd[0] == TEST_UNIT_READY) { | ||
|  | 		US_DEBUGP("alauda_transport: TEST_UNIT_READY.\n"); | ||
|  | 		return alauda_check_media(us); | ||
|  | 	} | ||
|  | 
 | ||
|  | 	if (srb->cmnd[0] == READ_CAPACITY) { | ||
|  | 		unsigned int num_zones; | ||
|  | 		unsigned long capacity; | ||
|  | 
 | ||
|  | 		rc = alauda_check_media(us); | ||
|  | 		if (rc != USB_STOR_TRANSPORT_GOOD) | ||
|  | 			return rc; | ||
|  | 
 | ||
|  | 		num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift | ||
|  | 			+ MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift); | ||
|  | 
 | ||
|  | 		capacity = num_zones * MEDIA_INFO(us).uzonesize | ||
|  | 			* MEDIA_INFO(us).blocksize; | ||
|  | 
 | ||
|  | 		/* Report capacity and page size */ | ||
|  | 		((__be32 *) ptr)[0] = cpu_to_be32(capacity - 1); | ||
|  | 		((__be32 *) ptr)[1] = cpu_to_be32(512); | ||
|  | 
 | ||
|  | 		usb_stor_set_xfer_buf(ptr, 8, srb); | ||
|  | 		return USB_STOR_TRANSPORT_GOOD; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	if (srb->cmnd[0] == READ_10) { | ||
|  | 		unsigned int page, pages; | ||
|  | 
 | ||
|  | 		rc = alauda_check_media(us); | ||
|  | 		if (rc != USB_STOR_TRANSPORT_GOOD) | ||
|  | 			return rc; | ||
|  | 
 | ||
|  | 		page = short_pack(srb->cmnd[3], srb->cmnd[2]); | ||
|  | 		page <<= 16; | ||
|  | 		page |= short_pack(srb->cmnd[5], srb->cmnd[4]); | ||
|  | 		pages = short_pack(srb->cmnd[8], srb->cmnd[7]); | ||
|  | 
 | ||
|  | 		US_DEBUGP("alauda_transport: READ_10: page %d pagect %d\n", | ||
|  | 			  page, pages); | ||
|  | 
 | ||
|  | 		return alauda_read_data(us, page, pages); | ||
|  | 	} | ||
|  | 
 | ||
|  | 	if (srb->cmnd[0] == WRITE_10) { | ||
|  | 		unsigned int page, pages; | ||
|  | 
 | ||
|  | 		rc = alauda_check_media(us); | ||
|  | 		if (rc != USB_STOR_TRANSPORT_GOOD) | ||
|  | 			return rc; | ||
|  | 
 | ||
|  | 		page = short_pack(srb->cmnd[3], srb->cmnd[2]); | ||
|  | 		page <<= 16; | ||
|  | 		page |= short_pack(srb->cmnd[5], srb->cmnd[4]); | ||
|  | 		pages = short_pack(srb->cmnd[8], srb->cmnd[7]); | ||
|  | 
 | ||
|  | 		US_DEBUGP("alauda_transport: WRITE_10: page %d pagect %d\n", | ||
|  | 			  page, pages); | ||
|  | 
 | ||
|  | 		return alauda_write_data(us, page, pages); | ||
|  | 	} | ||
|  | 
 | ||
|  | 	if (srb->cmnd[0] == REQUEST_SENSE) { | ||
|  | 		US_DEBUGP("alauda_transport: REQUEST_SENSE.\n"); | ||
|  | 
 | ||
|  | 		memset(ptr, 0, 18); | ||
|  | 		ptr[0] = 0xF0; | ||
|  | 		ptr[2] = info->sense_key; | ||
|  | 		ptr[7] = 11; | ||
|  | 		ptr[12] = info->sense_asc; | ||
|  | 		ptr[13] = info->sense_ascq; | ||
|  | 		usb_stor_set_xfer_buf(ptr, 18, srb); | ||
|  | 
 | ||
|  | 		return USB_STOR_TRANSPORT_GOOD; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { | ||
|  | 		/* sure.  whatever.  not like we can stop the user from popping
 | ||
|  | 		   the media out of the device (no locking doors, etc) */ | ||
|  | 		return USB_STOR_TRANSPORT_GOOD; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	US_DEBUGP("alauda_transport: Gah! Unknown command: %d (0x%x)\n", | ||
|  | 		srb->cmnd[0], srb->cmnd[0]); | ||
|  | 	info->sense_key = 0x05; | ||
|  | 	info->sense_asc = 0x20; | ||
|  | 	info->sense_ascq = 0x00; | ||
|  | 	return USB_STOR_TRANSPORT_FAILED; | ||
|  | } | ||
|  | 
 |