forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
linux-pinenote/arch/powerpc/kernel/misc_32.S

1211 lines
25 KiB
ArmAsm
Raw Normal View History

powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
/*
* This file contains miscellaneous low-level functions.
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
* Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
* and Paul Mackerras.
*
[PATCH] powerpc: Merge kexec This patch merges, to some extent, the PPC32 and PPC64 kexec implementations. We adopt the PPC32 approach of having ppc_md callbacks for the kexec functions. The current PPC64 implementation becomes the "default" implementation for PPC64 which platforms can select if they need no special treatment. I've added these default callbacks to pseries/maple/cell/powermac, this means iSeries no longer supports kexec - but it never worked anyway. I've renamed PPC32's machine_kexec_simple to default_machine_kexec, inline with PPC64. Judging by the comments it might be better named machine_kexec_non_of, or something, but at the moment it's the only implementation for PPC32 so it's the "default". Kexec requires machine_shutdown(), which is in machine_kexec.c on PPC32, but we already have in setup-common.c on powerpc. All this does is call ppc_md.nvram_sync, which only powermac implements, so instead make machine_shutdown a ppc_md member and have it call core99_nvram_sync directly on powermac. I've also stuck relocate_kernel.S into misc_32.S for powerpc. Built for ARCH=ppc, and 32 & 64 bit ARCH=powerpc, with KEXEC=y/n. Booted on P5 LPAR and successfully kexec'ed. Should apply on top of 493f25ef4087395891c99fcfe2c72e62e293e89f. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14 23:35:00 +11:00
* kexec bits:
* Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com>
* GameCube/ppc32 port Copyright (C) 2004 Albert Herranz
powerpc/44x: Kexec support for PPC440X chipsets This patch adds kexec support for PPC440 based chipsets. This work is based on the KEXEC patches for FSL BookE. The FSL BookE patch and the code flow could be found at the link below: http://patchwork.ozlabs.org/patch/49359/ Steps: 1) Invalidate all the TLB entries except the one this code is run from 2) Create a tmp mapping for our code in the other address space and jump to it 3) Invalidate the entry we used 4) Create a 1:1 mapping for 0-2GiB in blocks of 256M 5) Jump to the new 1:1 mapping and invalidate the tmp mapping I have tested this patches on Ebony, Sequoia boards and Virtex on QEMU. You need kexec-tools commit e8b7939b1e or newer for ppc440x support, available at: git://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git Signed-off-by: Suzuki Poulose <suzuki@in.ibm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-07-18 03:29:20 +00:00
* PPC44x port. Copyright (C) 2011, IBM Corporation
* Author: Suzuki Poulose <suzuki@in.ibm.com>
[PATCH] powerpc: Merge kexec This patch merges, to some extent, the PPC32 and PPC64 kexec implementations. We adopt the PPC32 approach of having ppc_md callbacks for the kexec functions. The current PPC64 implementation becomes the "default" implementation for PPC64 which platforms can select if they need no special treatment. I've added these default callbacks to pseries/maple/cell/powermac, this means iSeries no longer supports kexec - but it never worked anyway. I've renamed PPC32's machine_kexec_simple to default_machine_kexec, inline with PPC64. Judging by the comments it might be better named machine_kexec_non_of, or something, but at the moment it's the only implementation for PPC32 so it's the "default". Kexec requires machine_shutdown(), which is in machine_kexec.c on PPC32, but we already have in setup-common.c on powerpc. All this does is call ppc_md.nvram_sync, which only powermac implements, so instead make machine_shutdown a ppc_md member and have it call core99_nvram_sync directly on powermac. I've also stuck relocate_kernel.S into misc_32.S for powerpc. Built for ARCH=ppc, and 32 & 64 bit ARCH=powerpc, with KEXEC=y/n. Booted on P5 LPAR and successfully kexec'ed. Should apply on top of 493f25ef4087395891c99fcfe2c72e62e293e89f. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14 23:35:00 +11:00
*
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include <linux/sys.h>
#include <asm/unistd.h>
#include <asm/errno.h>
#include <asm/reg.h>
#include <asm/page.h>
#include <asm/cache.h>
#include <asm/cputable.h>
#include <asm/mmu.h>
#include <asm/ppc_asm.h>
#include <asm/thread_info.h>
#include <asm/asm-offsets.h>
[PATCH] powerpc: Merge kexec This patch merges, to some extent, the PPC32 and PPC64 kexec implementations. We adopt the PPC32 approach of having ppc_md callbacks for the kexec functions. The current PPC64 implementation becomes the "default" implementation for PPC64 which platforms can select if they need no special treatment. I've added these default callbacks to pseries/maple/cell/powermac, this means iSeries no longer supports kexec - but it never worked anyway. I've renamed PPC32's machine_kexec_simple to default_machine_kexec, inline with PPC64. Judging by the comments it might be better named machine_kexec_non_of, or something, but at the moment it's the only implementation for PPC32 so it's the "default". Kexec requires machine_shutdown(), which is in machine_kexec.c on PPC32, but we already have in setup-common.c on powerpc. All this does is call ppc_md.nvram_sync, which only powermac implements, so instead make machine_shutdown a ppc_md member and have it call core99_nvram_sync directly on powermac. I've also stuck relocate_kernel.S into misc_32.S for powerpc. Built for ARCH=ppc, and 32 & 64 bit ARCH=powerpc, with KEXEC=y/n. Booted on P5 LPAR and successfully kexec'ed. Should apply on top of 493f25ef4087395891c99fcfe2c72e62e293e89f. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14 23:35:00 +11:00
#include <asm/processor.h>
#include <asm/kexec.h>
powerpc/mm: Add SMP support to no-hash TLB handling This commit moves the whole no-hash TLB handling out of line into a new tlb_nohash.c file, and implements some basic SMP support using IPIs and/or broadcast tlbivax instructions. Note that I'm using local invalidations for D->I cache coherency. At worst, if another processor is trying to execute the same and has the old entry in its TLB, it will just take a fault and re-do the TLB flush locally (it won't re-do the cache flush in any case). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-18 19:13:38 +00:00
#include <asm/bug.h>
powerpc: Remove second definition of STACK_FRAME_OVERHEAD Since STACK_FRAME_OVERHEAD is defined in asm/ptrace.h and that is ASSEMBER safe, we can just include that instead of going via asm-offsets.h. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-18 15:06:17 +00:00
#include <asm/ptrace.h>
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
.text
powerpc: Remove ksp_limit on ppc64 We've been keeping that field in thread_struct for a while, it contains the "limit" of the current stack pointer and is meant to be used for detecting stack overflows. It has a few problems however: - First, it was never actually *used* on 64-bit. Set and updated but not actually exploited - When switching stack to/from irq and softirq stacks, it's update is racy unless we hard disable interrupts, which is costly. This is fine on 32-bit as we don't soft-disable there but not on 64-bit. Thus rather than fixing 2 in order to implement 1 in some hypothetical future, let's remove the code completely from 64-bit. In order to avoid a clutter of ifdef's, we remove the updates from C code completely during interrupt stack switching, and instead maintain it from the asm helper that is used to do the stack switching in the first place. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-24 15:17:21 +10:00
/*
* We store the saved ksp_limit in the unused part
* of the STACK_FRAME_OVERHEAD
*/
[POWERPC] Add IRQSTACKS support on ppc32 This makes it possible to use separate stacks for hard and soft IRQs on 32-bit powerpc as well as on 64-bit. The code for 32-bit is just the 32-bit analog of the 64-bit code. * Added allocation and initialization of the irq stacks. We limit the stacks to be in lowmem for ppc32. * Implemented ppc32 versions of call_do_softirq() and call_handle_irq() to switch the stack pointers * Reworked how we do stack overflow detection. We now keep around the limit of the stack in the thread_struct and compare against the limit to see if we've overflowed. We can now use this on ppc64 if desired. [ paulus@samba.org: Fixed bug on 6xx where we need to reload r9 with the thread_info pointer. ] Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-28 16:21:22 +10:00
_GLOBAL(call_do_softirq)
mflr r0
stw r0,4(r1)
powerpc: Remove ksp_limit on ppc64 We've been keeping that field in thread_struct for a while, it contains the "limit" of the current stack pointer and is meant to be used for detecting stack overflows. It has a few problems however: - First, it was never actually *used* on 64-bit. Set and updated but not actually exploited - When switching stack to/from irq and softirq stacks, it's update is racy unless we hard disable interrupts, which is costly. This is fine on 32-bit as we don't soft-disable there but not on 64-bit. Thus rather than fixing 2 in order to implement 1 in some hypothetical future, let's remove the code completely from 64-bit. In order to avoid a clutter of ifdef's, we remove the updates from C code completely during interrupt stack switching, and instead maintain it from the asm helper that is used to do the stack switching in the first place. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-24 15:17:21 +10:00
lwz r10,THREAD+KSP_LIMIT(r2)
addi r11,r3,THREAD_INFO_GAP
[POWERPC] Add IRQSTACKS support on ppc32 This makes it possible to use separate stacks for hard and soft IRQs on 32-bit powerpc as well as on 64-bit. The code for 32-bit is just the 32-bit analog of the 64-bit code. * Added allocation and initialization of the irq stacks. We limit the stacks to be in lowmem for ppc32. * Implemented ppc32 versions of call_do_softirq() and call_handle_irq() to switch the stack pointers * Reworked how we do stack overflow detection. We now keep around the limit of the stack in the thread_struct and compare against the limit to see if we've overflowed. We can now use this on ppc64 if desired. [ paulus@samba.org: Fixed bug on 6xx where we need to reload r9 with the thread_info pointer. ] Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-28 16:21:22 +10:00
stwu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3)
mr r1,r3
powerpc: Remove ksp_limit on ppc64 We've been keeping that field in thread_struct for a while, it contains the "limit" of the current stack pointer and is meant to be used for detecting stack overflows. It has a few problems however: - First, it was never actually *used* on 64-bit. Set and updated but not actually exploited - When switching stack to/from irq and softirq stacks, it's update is racy unless we hard disable interrupts, which is costly. This is fine on 32-bit as we don't soft-disable there but not on 64-bit. Thus rather than fixing 2 in order to implement 1 in some hypothetical future, let's remove the code completely from 64-bit. In order to avoid a clutter of ifdef's, we remove the updates from C code completely during interrupt stack switching, and instead maintain it from the asm helper that is used to do the stack switching in the first place. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-24 15:17:21 +10:00
stw r10,8(r1)
stw r11,THREAD+KSP_LIMIT(r2)
[POWERPC] Add IRQSTACKS support on ppc32 This makes it possible to use separate stacks for hard and soft IRQs on 32-bit powerpc as well as on 64-bit. The code for 32-bit is just the 32-bit analog of the 64-bit code. * Added allocation and initialization of the irq stacks. We limit the stacks to be in lowmem for ppc32. * Implemented ppc32 versions of call_do_softirq() and call_handle_irq() to switch the stack pointers * Reworked how we do stack overflow detection. We now keep around the limit of the stack in the thread_struct and compare against the limit to see if we've overflowed. We can now use this on ppc64 if desired. [ paulus@samba.org: Fixed bug on 6xx where we need to reload r9 with the thread_info pointer. ] Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-28 16:21:22 +10:00
bl __do_softirq
powerpc: Remove ksp_limit on ppc64 We've been keeping that field in thread_struct for a while, it contains the "limit" of the current stack pointer and is meant to be used for detecting stack overflows. It has a few problems however: - First, it was never actually *used* on 64-bit. Set and updated but not actually exploited - When switching stack to/from irq and softirq stacks, it's update is racy unless we hard disable interrupts, which is costly. This is fine on 32-bit as we don't soft-disable there but not on 64-bit. Thus rather than fixing 2 in order to implement 1 in some hypothetical future, let's remove the code completely from 64-bit. In order to avoid a clutter of ifdef's, we remove the updates from C code completely during interrupt stack switching, and instead maintain it from the asm helper that is used to do the stack switching in the first place. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-24 15:17:21 +10:00
lwz r10,8(r1)
[POWERPC] Add IRQSTACKS support on ppc32 This makes it possible to use separate stacks for hard and soft IRQs on 32-bit powerpc as well as on 64-bit. The code for 32-bit is just the 32-bit analog of the 64-bit code. * Added allocation and initialization of the irq stacks. We limit the stacks to be in lowmem for ppc32. * Implemented ppc32 versions of call_do_softirq() and call_handle_irq() to switch the stack pointers * Reworked how we do stack overflow detection. We now keep around the limit of the stack in the thread_struct and compare against the limit to see if we've overflowed. We can now use this on ppc64 if desired. [ paulus@samba.org: Fixed bug on 6xx where we need to reload r9 with the thread_info pointer. ] Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-28 16:21:22 +10:00
lwz r1,0(r1)
lwz r0,4(r1)
powerpc: Remove ksp_limit on ppc64 We've been keeping that field in thread_struct for a while, it contains the "limit" of the current stack pointer and is meant to be used for detecting stack overflows. It has a few problems however: - First, it was never actually *used* on 64-bit. Set and updated but not actually exploited - When switching stack to/from irq and softirq stacks, it's update is racy unless we hard disable interrupts, which is costly. This is fine on 32-bit as we don't soft-disable there but not on 64-bit. Thus rather than fixing 2 in order to implement 1 in some hypothetical future, let's remove the code completely from 64-bit. In order to avoid a clutter of ifdef's, we remove the updates from C code completely during interrupt stack switching, and instead maintain it from the asm helper that is used to do the stack switching in the first place. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-24 15:17:21 +10:00
stw r10,THREAD+KSP_LIMIT(r2)
[POWERPC] Add IRQSTACKS support on ppc32 This makes it possible to use separate stacks for hard and soft IRQs on 32-bit powerpc as well as on 64-bit. The code for 32-bit is just the 32-bit analog of the 64-bit code. * Added allocation and initialization of the irq stacks. We limit the stacks to be in lowmem for ppc32. * Implemented ppc32 versions of call_do_softirq() and call_handle_irq() to switch the stack pointers * Reworked how we do stack overflow detection. We now keep around the limit of the stack in the thread_struct and compare against the limit to see if we've overflowed. We can now use this on ppc64 if desired. [ paulus@samba.org: Fixed bug on 6xx where we need to reload r9 with the thread_info pointer. ] Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-28 16:21:22 +10:00
mtlr r0
blr
powerpc: Set the correct ksp_limit on ppc32 when switching to irq stack Guenter Roeck has got the following call trace on a p2020 board: Kernel stack overflow in process eb3e5a00, r1=eb79df90 CPU: 0 PID: 2838 Comm: ssh Not tainted 3.13.0-rc8-juniper-00146-g19eca00 #4 task: eb3e5a00 ti: c0616000 task.ti: ef440000 NIP: c003a420 LR: c003a410 CTR: c0017518 REGS: eb79dee0 TRAP: 0901 Not tainted (3.13.0-rc8-juniper-00146-g19eca00) MSR: 00029000 <CE,EE,ME> CR: 24008444 XER: 00000000 GPR00: c003a410 eb79df90 eb3e5a00 00000000 eb05d900 00000001 65d87646 00000000 GPR08: 00000000 020b8000 00000000 00000000 44008442 NIP [c003a420] __do_softirq+0x94/0x1ec LR [c003a410] __do_softirq+0x84/0x1ec Call Trace: [eb79df90] [c003a410] __do_softirq+0x84/0x1ec (unreliable) [eb79dfe0] [c003a970] irq_exit+0xbc/0xc8 [eb79dff0] [c000cc1c] call_do_irq+0x24/0x3c [ef441f20] [c00046a8] do_IRQ+0x8c/0xf8 [ef441f40] [c000e7f4] ret_from_except+0x0/0x18 --- Exception: 501 at 0xfcda524 LR = 0x10024900 Instruction dump: 7c781b78 3b40000a 3a73b040 543c0024 3a800000 3b3913a0 7ef5bb78 48201bf9 5463103a 7d3b182e 7e89b92e 7c008146 <3ba00000> 7e7e9b78 48000014 57fff87f Kernel panic - not syncing: kernel stack overflow CPU: 0 PID: 2838 Comm: ssh Not tainted 3.13.0-rc8-juniper-00146-g19eca00 #4 Call Trace: The reason is that we have used the wrong register to calculate the ksp_limit in commit cbc9565ee826 (powerpc: Remove ksp_limit on ppc64). Just fix it. As suggested by Benjamin Herrenschmidt, also add the C prototype of the function in the comment in order to avoid such kind of errors in the future. Cc: stable@vger.kernel.org # 3.12 Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-17 12:25:28 +08:00
/*
* void call_do_irq(struct pt_regs *regs, struct thread_info *irqtp);
*/
powerpc/irq: Run softirqs off the top of the irq stack Nowadays, irq_exit() calls __do_softirq() pretty much directly instead of calling do_softirq() which switches to the decicated softirq stack. This has lead to observed stack overflows on powerpc since we call irq_enter() and irq_exit() outside of the scope that switches to the irq stack. This fixes it by moving the stack switching up a level, making irq_enter() and irq_exit() run off the irq stack. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-23 14:29:11 +10:00
_GLOBAL(call_do_irq)
[POWERPC] Add IRQSTACKS support on ppc32 This makes it possible to use separate stacks for hard and soft IRQs on 32-bit powerpc as well as on 64-bit. The code for 32-bit is just the 32-bit analog of the 64-bit code. * Added allocation and initialization of the irq stacks. We limit the stacks to be in lowmem for ppc32. * Implemented ppc32 versions of call_do_softirq() and call_handle_irq() to switch the stack pointers * Reworked how we do stack overflow detection. We now keep around the limit of the stack in the thread_struct and compare against the limit to see if we've overflowed. We can now use this on ppc64 if desired. [ paulus@samba.org: Fixed bug on 6xx where we need to reload r9 with the thread_info pointer. ] Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-28 16:21:22 +10:00
mflr r0
stw r0,4(r1)
powerpc: Remove ksp_limit on ppc64 We've been keeping that field in thread_struct for a while, it contains the "limit" of the current stack pointer and is meant to be used for detecting stack overflows. It has a few problems however: - First, it was never actually *used* on 64-bit. Set and updated but not actually exploited - When switching stack to/from irq and softirq stacks, it's update is racy unless we hard disable interrupts, which is costly. This is fine on 32-bit as we don't soft-disable there but not on 64-bit. Thus rather than fixing 2 in order to implement 1 in some hypothetical future, let's remove the code completely from 64-bit. In order to avoid a clutter of ifdef's, we remove the updates from C code completely during interrupt stack switching, and instead maintain it from the asm helper that is used to do the stack switching in the first place. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-24 15:17:21 +10:00
lwz r10,THREAD+KSP_LIMIT(r2)
powerpc: Set the correct ksp_limit on ppc32 when switching to irq stack Guenter Roeck has got the following call trace on a p2020 board: Kernel stack overflow in process eb3e5a00, r1=eb79df90 CPU: 0 PID: 2838 Comm: ssh Not tainted 3.13.0-rc8-juniper-00146-g19eca00 #4 task: eb3e5a00 ti: c0616000 task.ti: ef440000 NIP: c003a420 LR: c003a410 CTR: c0017518 REGS: eb79dee0 TRAP: 0901 Not tainted (3.13.0-rc8-juniper-00146-g19eca00) MSR: 00029000 <CE,EE,ME> CR: 24008444 XER: 00000000 GPR00: c003a410 eb79df90 eb3e5a00 00000000 eb05d900 00000001 65d87646 00000000 GPR08: 00000000 020b8000 00000000 00000000 44008442 NIP [c003a420] __do_softirq+0x94/0x1ec LR [c003a410] __do_softirq+0x84/0x1ec Call Trace: [eb79df90] [c003a410] __do_softirq+0x84/0x1ec (unreliable) [eb79dfe0] [c003a970] irq_exit+0xbc/0xc8 [eb79dff0] [c000cc1c] call_do_irq+0x24/0x3c [ef441f20] [c00046a8] do_IRQ+0x8c/0xf8 [ef441f40] [c000e7f4] ret_from_except+0x0/0x18 --- Exception: 501 at 0xfcda524 LR = 0x10024900 Instruction dump: 7c781b78 3b40000a 3a73b040 543c0024 3a800000 3b3913a0 7ef5bb78 48201bf9 5463103a 7d3b182e 7e89b92e 7c008146 <3ba00000> 7e7e9b78 48000014 57fff87f Kernel panic - not syncing: kernel stack overflow CPU: 0 PID: 2838 Comm: ssh Not tainted 3.13.0-rc8-juniper-00146-g19eca00 #4 Call Trace: The reason is that we have used the wrong register to calculate the ksp_limit in commit cbc9565ee826 (powerpc: Remove ksp_limit on ppc64). Just fix it. As suggested by Benjamin Herrenschmidt, also add the C prototype of the function in the comment in order to avoid such kind of errors in the future. Cc: stable@vger.kernel.org # 3.12 Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-17 12:25:28 +08:00
addi r11,r4,THREAD_INFO_GAP
powerpc/irq: Run softirqs off the top of the irq stack Nowadays, irq_exit() calls __do_softirq() pretty much directly instead of calling do_softirq() which switches to the decicated softirq stack. This has lead to observed stack overflows on powerpc since we call irq_enter() and irq_exit() outside of the scope that switches to the irq stack. This fixes it by moving the stack switching up a level, making irq_enter() and irq_exit() run off the irq stack. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-23 14:29:11 +10:00
stwu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r4)
mr r1,r4
powerpc: Remove ksp_limit on ppc64 We've been keeping that field in thread_struct for a while, it contains the "limit" of the current stack pointer and is meant to be used for detecting stack overflows. It has a few problems however: - First, it was never actually *used* on 64-bit. Set and updated but not actually exploited - When switching stack to/from irq and softirq stacks, it's update is racy unless we hard disable interrupts, which is costly. This is fine on 32-bit as we don't soft-disable there but not on 64-bit. Thus rather than fixing 2 in order to implement 1 in some hypothetical future, let's remove the code completely from 64-bit. In order to avoid a clutter of ifdef's, we remove the updates from C code completely during interrupt stack switching, and instead maintain it from the asm helper that is used to do the stack switching in the first place. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-24 15:17:21 +10:00
stw r10,8(r1)
stw r11,THREAD+KSP_LIMIT(r2)
powerpc/irq: Run softirqs off the top of the irq stack Nowadays, irq_exit() calls __do_softirq() pretty much directly instead of calling do_softirq() which switches to the decicated softirq stack. This has lead to observed stack overflows on powerpc since we call irq_enter() and irq_exit() outside of the scope that switches to the irq stack. This fixes it by moving the stack switching up a level, making irq_enter() and irq_exit() run off the irq stack. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-23 14:29:11 +10:00
bl __do_irq
powerpc: Remove ksp_limit on ppc64 We've been keeping that field in thread_struct for a while, it contains the "limit" of the current stack pointer and is meant to be used for detecting stack overflows. It has a few problems however: - First, it was never actually *used* on 64-bit. Set and updated but not actually exploited - When switching stack to/from irq and softirq stacks, it's update is racy unless we hard disable interrupts, which is costly. This is fine on 32-bit as we don't soft-disable there but not on 64-bit. Thus rather than fixing 2 in order to implement 1 in some hypothetical future, let's remove the code completely from 64-bit. In order to avoid a clutter of ifdef's, we remove the updates from C code completely during interrupt stack switching, and instead maintain it from the asm helper that is used to do the stack switching in the first place. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-24 15:17:21 +10:00
lwz r10,8(r1)
[POWERPC] Add IRQSTACKS support on ppc32 This makes it possible to use separate stacks for hard and soft IRQs on 32-bit powerpc as well as on 64-bit. The code for 32-bit is just the 32-bit analog of the 64-bit code. * Added allocation and initialization of the irq stacks. We limit the stacks to be in lowmem for ppc32. * Implemented ppc32 versions of call_do_softirq() and call_handle_irq() to switch the stack pointers * Reworked how we do stack overflow detection. We now keep around the limit of the stack in the thread_struct and compare against the limit to see if we've overflowed. We can now use this on ppc64 if desired. [ paulus@samba.org: Fixed bug on 6xx where we need to reload r9 with the thread_info pointer. ] Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-28 16:21:22 +10:00
lwz r1,0(r1)
lwz r0,4(r1)
powerpc: Remove ksp_limit on ppc64 We've been keeping that field in thread_struct for a while, it contains the "limit" of the current stack pointer and is meant to be used for detecting stack overflows. It has a few problems however: - First, it was never actually *used* on 64-bit. Set and updated but not actually exploited - When switching stack to/from irq and softirq stacks, it's update is racy unless we hard disable interrupts, which is costly. This is fine on 32-bit as we don't soft-disable there but not on 64-bit. Thus rather than fixing 2 in order to implement 1 in some hypothetical future, let's remove the code completely from 64-bit. In order to avoid a clutter of ifdef's, we remove the updates from C code completely during interrupt stack switching, and instead maintain it from the asm helper that is used to do the stack switching in the first place. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-24 15:17:21 +10:00
stw r10,THREAD+KSP_LIMIT(r2)
[POWERPC] Add IRQSTACKS support on ppc32 This makes it possible to use separate stacks for hard and soft IRQs on 32-bit powerpc as well as on 64-bit. The code for 32-bit is just the 32-bit analog of the 64-bit code. * Added allocation and initialization of the irq stacks. We limit the stacks to be in lowmem for ppc32. * Implemented ppc32 versions of call_do_softirq() and call_handle_irq() to switch the stack pointers * Reworked how we do stack overflow detection. We now keep around the limit of the stack in the thread_struct and compare against the limit to see if we've overflowed. We can now use this on ppc64 if desired. [ paulus@samba.org: Fixed bug on 6xx where we need to reload r9 with the thread_info pointer. ] Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-28 16:21:22 +10:00
mtlr r0
blr
powerpc: Merge time.c and asm/time.h. We now use the merged time.c for both 32-bit and 64-bit compilation with ARCH=powerpc, and for ARCH=ppc64, but not for ARCH=ppc32. This removes setup_default_decr (folds its function into time_init) and moves wakeup_decrementer into time.c. This also makes an asm-powerpc/rtc.h. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 09:23:26 +10:00
/*
* This returns the high 64 bits of the product of two 64-bit numbers.
*/
_GLOBAL(mulhdu)
cmpwi r6,0
cmpwi cr1,r3,0
mr r10,r4
mulhwu r4,r4,r5
beq 1f
mulhwu r0,r10,r6
mullw r7,r10,r5
addc r7,r0,r7
addze r4,r4
1: beqlr cr1 /* all done if high part of A is 0 */
mr r10,r3
mullw r9,r3,r5
mulhwu r3,r3,r5
beq 2f
mullw r0,r10,r6
mulhwu r8,r10,r6
addc r7,r0,r7
adde r4,r4,r8
addze r3,r3
2: addc r4,r4,r9
addze r3,r3
blr
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
/*
* sub_reloc_offset(x) returns x - reloc_offset().
*/
_GLOBAL(sub_reloc_offset)
mflr r0
bl 1f
1: mflr r5
lis r4,1b@ha
addi r4,r4,1b@l
subf r5,r4,r5
subf r3,r5,r3
mtlr r0
blr
/*
* reloc_got2 runs through the .got2 section adding an offset
* to each entry.
*/
_GLOBAL(reloc_got2)
mflr r11
lis r7,__got2_start@ha
addi r7,r7,__got2_start@l
lis r8,__got2_end@ha
addi r8,r8,__got2_end@l
subf r8,r7,r8
srwi. r8,r8,2
beqlr
mtctr r8
bl 1f
1: mflr r0
lis r4,1b@ha
addi r4,r4,1b@l
subf r0,r4,r0
add r7,r0,r7
2: lwz r0,0(r7)
add r0,r0,r3
stw r0,0(r7)
addi r7,r7,4
bdnz 2b
mtlr r11
blr
/*
* call_setup_cpu - call the setup_cpu function for this cpu
* r3 = data offset, r24 = cpu number
*
* Setup function is called with:
* r3 = data offset
* r4 = ptr to CPU spec (relocated)
*/
_GLOBAL(call_setup_cpu)
addis r4,r3,cur_cpu_spec@ha
addi r4,r4,cur_cpu_spec@l
lwz r4,0(r4)
add r4,r4,r3
lwz r5,CPU_SPEC_SETUP(r4)
[PATCH] powerpc: remove do-nothing cpu setup routines Removed the do-nothing routines __setup_cpu_power3 and __setup_cpu_power4 and replaced them with a null pointer check in the caller. Also removed the Cell processor specific routine __setup_cpu_be which improperly accessed the hypervisor page size configuration at SPR HID6. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-19 14:24:18 +10:00
cmpwi 0,r5,0
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
add r5,r5,r3
beqlr
mtctr r5
bctr
#if defined(CONFIG_CPU_FREQ_PMAC) && defined(CONFIG_6xx)
/* This gets called by via-pmu.c to switch the PLL selection
* on 750fx CPU. This function should really be moved to some
* other place (as most of the cpufreq code in via-pmu
*/
_GLOBAL(low_choose_750fx_pll)
/* Clear MSR:EE */
mfmsr r7
rlwinm r0,r7,0,17,15
mtmsr r0
/* If switching to PLL1, disable HID0:BTIC */
cmplwi cr0,r3,0
beq 1f
mfspr r5,SPRN_HID0
rlwinm r5,r5,0,27,25
sync
mtspr SPRN_HID0,r5
isync
sync
1:
/* Calc new HID1 value */
mfspr r4,SPRN_HID1 /* Build a HID1:PS bit from parameter */
rlwinm r5,r3,16,15,15 /* Clear out HID1:PS from value read */
rlwinm r4,r4,0,16,14 /* Could have I used rlwimi here ? */
or r4,r4,r5
mtspr SPRN_HID1,r4
/* Store new HID1 image */
powerpc: Use CURRENT_THREAD_INFO instead of open coded assembly Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-05 04:41:35 +00:00
CURRENT_THREAD_INFO(r6, r1)
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
lwz r6,TI_CPU(r6)
slwi r6,r6,2
addis r6,r6,nap_save_hid1@ha
stw r4,nap_save_hid1@l(r6)
/* If switching to PLL0, enable HID0:BTIC */
cmplwi cr0,r3,0
bne 1f
mfspr r5,SPRN_HID0
ori r5,r5,HID0_BTIC
sync
mtspr SPRN_HID0,r5
isync
sync
1:
/* Return */
mtmsr r7
blr
_GLOBAL(low_choose_7447a_dfs)
/* Clear MSR:EE */
mfmsr r7
rlwinm r0,r7,0,17,15
mtmsr r0
/* Calc new HID1 value */
mfspr r4,SPRN_HID1
insrwi r4,r3,1,9 /* insert parameter into bit 9 */
sync
mtspr SPRN_HID1,r4
sync
isync
/* Return */
mtmsr r7
blr
#endif /* CONFIG_CPU_FREQ_PMAC && CONFIG_6xx */
/*
* complement mask on the msr then "or" some values on.
* _nmask_and_or_msr(nmask, value_to_or)
*/
_GLOBAL(_nmask_and_or_msr)
mfmsr r0 /* Get current msr */
andc r0,r0,r3 /* And off the bits set in r3 (first parm) */
or r0,r0,r4 /* Or on the bits in r4 (second parm) */
SYNC /* Some chip revs have problems here... */
mtmsr r0 /* Update machine state */
isync
blr /* Done */
[POWERPC] 4xx: Add early udbg support for 40x processors This adds some basic real mode based early udbg support for 40x in order to debug things more easily Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-21 15:39:26 +11:00
#ifdef CONFIG_40x
/*
* Do an IO access in real mode
*/
_GLOBAL(real_readb)
mfmsr r7
ori r0,r7,MSR_DR
xori r0,r0,MSR_DR
sync
mtmsr r0
sync
isync
lbz r3,0(r3)
sync
mtmsr r7
sync
isync
blr
/*
* Do an IO access in real mode
*/
_GLOBAL(real_writeb)
mfmsr r7
ori r0,r7,MSR_DR
xori r0,r0,MSR_DR
sync
mtmsr r0
sync
isync
stb r3,0(r4)
sync
mtmsr r7
sync
isync
blr
#endif /* CONFIG_40x */
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
powerpc: Introduce local (non-broadcast) forms of tlb invalidates Introduced a new set of low level tlb invalidate functions that do not broadcast invalidates on the bus: _tlbil_all - invalidate all _tlbil_pid - invalidate based on process id (or mm context) _tlbil_va - invalidate based on virtual address (ea + pid) On non-SMP configs _tlbil_all should be functionally equivalent to _tlbia and _tlbil_va should be functionally equivalent to _tlbie. The intent of this change is to handle SMP based invalidates via IPIs instead of broadcasts as the mechanism scales better for larger number of cores. On e500 (fsl-booke mmu) based cores move to using MMUCSR for invalidate alls and tlbsx/tlbwe for invalidate virtual address. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-15 16:12:25 -05:00
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
/*
* Flush instruction cache.
* This is a no-op on the 601.
*/
_GLOBAL(flush_instruction_cache)
#if defined(CONFIG_8xx)
isync
lis r5, IDC_INVALL@h
mtspr SPRN_IC_CST, r5
#elif defined(CONFIG_4xx)
#ifdef CONFIG_403GCX
li r3, 512
mtctr r3
lis r4, KERNELBASE@h
1: iccci 0, r4
addi r4, r4, 16
bdnz 1b
#else
lis r3, KERNELBASE@h
iccci 0,r3
#endif
#elif CONFIG_FSL_BOOKE
BEGIN_FTR_SECTION
mfspr r3,SPRN_L1CSR0
ori r3,r3,L1CSR0_CFI|L1CSR0_CLFC
/* msync; isync recommended here */
mtspr SPRN_L1CSR0,r3
isync
blr
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 14:52:57 +10:00
END_FTR_SECTION_IFSET(CPU_FTR_UNIFIED_ID_CACHE)
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
mfspr r3,SPRN_L1CSR1
ori r3,r3,L1CSR1_ICFI|L1CSR1_ICLFR
mtspr SPRN_L1CSR1,r3
#else
mfspr r3,SPRN_PVR
rlwinm r3,r3,16,16,31
cmpwi 0,r3,1
beqlr /* for 601, do nothing */
/* 603/604 processor - use invalidate-all bit in HID0 */
mfspr r3,SPRN_HID0
ori r3,r3,HID0_ICFI
mtspr SPRN_HID0,r3
#endif /* CONFIG_8xx/4xx */
isync
blr
/*
* Write any modified data cache blocks out to memory
* and invalidate the corresponding instruction cache blocks.
* This is a no-op on the 601.
*
* flush_icache_range(unsigned long start, unsigned long stop)
*/
powerpc: Remove the symbol __flush_icache_range And now the function flush_icache_range() is just a wrapper which only invoke the function __flush_icache_range() directly. So we don't have reason to keep it anymore. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-06 18:23:31 +08:00
_KPROBE(flush_icache_range)
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
BEGIN_FTR_SECTION
powerpc: purge all the prefetched instructions for the coherent icache flush As Benjamin Herrenschmidt has indicated, we still need a dummy icbi to purge all the prefetched instructions from the ifetch buffers for the snooping icache. We also need a sync before the icbi to order the actual stores to memory that might have modified instructions with the icbi. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-22 09:30:35 +08:00
PURGE_PREFETCHED_INS
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
blr /* for 601, do nothing */
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 14:52:57 +10:00
END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
li r5,L1_CACHE_BYTES-1
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
andc r3,r3,r5
subf r4,r3,r4
add r4,r4,r5
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
srwi. r4,r4,L1_CACHE_SHIFT
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
beqlr
mtctr r4
mr r6,r3
1: dcbst 0,r3
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
addi r3,r3,L1_CACHE_BYTES
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
bdnz 1b
sync /* wait for dcbst's to get to ram */
powerpc: Fix __flush_icache_range on 44x The ptrace POKETEXT interface allows a process to modify the text pages of a child process being ptraced, usually to insert breakpoints via trap instructions. The kernel eventually calls copy_to_user_page, which in turn calls __flush_icache_range to invalidate the icache lines for the child process. However, this function does not work on 44x due to the icache being virtually indexed. This was noticed by a breakpoint being triggered after it had been cleared by ltrace on a 440EPx board. The convenient solution is to do a flash invalidate of the icache in the __flush_icache_range function. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-19 04:27:53 +00:00
#ifndef CONFIG_44x
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
mtctr r4
2: icbi 0,r6
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
addi r6,r6,L1_CACHE_BYTES
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
bdnz 2b
powerpc: Fix __flush_icache_range on 44x The ptrace POKETEXT interface allows a process to modify the text pages of a child process being ptraced, usually to insert breakpoints via trap instructions. The kernel eventually calls copy_to_user_page, which in turn calls __flush_icache_range to invalidate the icache lines for the child process. However, this function does not work on 44x due to the icache being virtually indexed. This was noticed by a breakpoint being triggered after it had been cleared by ltrace on a 440EPx board. The convenient solution is to do a flash invalidate of the icache in the __flush_icache_range function. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-19 04:27:53 +00:00
#else
/* Flash invalidate on 44x because we are passed kmapped addresses and
this doesn't work for userspace pages due to the virtually tagged
icache. Sigh. */
iccci 0, r0
#endif
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
sync /* additional sync needed on g4 */
isync
blr
/*
* Write any modified data cache blocks out to memory.
* Does not invalidate the corresponding cache lines (especially for
* any corresponding instruction cache).
*
* clean_dcache_range(unsigned long start, unsigned long stop)
*/
_GLOBAL(clean_dcache_range)
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
li r5,L1_CACHE_BYTES-1
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
andc r3,r3,r5
subf r4,r3,r4
add r4,r4,r5
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
srwi. r4,r4,L1_CACHE_SHIFT
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
beqlr
mtctr r4
1: dcbst 0,r3
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
addi r3,r3,L1_CACHE_BYTES
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
bdnz 1b
sync /* wait for dcbst's to get to ram */
blr
/*
* Write any modified data cache blocks out to memory and invalidate them.
* Does not invalidate the corresponding instruction cache blocks.
*
* flush_dcache_range(unsigned long start, unsigned long stop)
*/
_GLOBAL(flush_dcache_range)
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
li r5,L1_CACHE_BYTES-1
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
andc r3,r3,r5
subf r4,r3,r4
add r4,r4,r5
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
srwi. r4,r4,L1_CACHE_SHIFT
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
beqlr
mtctr r4
1: dcbf 0,r3
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
addi r3,r3,L1_CACHE_BYTES
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
bdnz 1b
sync /* wait for dcbst's to get to ram */
blr
/*
* Like above, but invalidate the D-cache. This is used by the 8xx
* to invalidate the cache so the PPC core doesn't get stale data
* from the CPM (no cache snooping here :-).
*
* invalidate_dcache_range(unsigned long start, unsigned long stop)
*/
_GLOBAL(invalidate_dcache_range)
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
li r5,L1_CACHE_BYTES-1
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
andc r3,r3,r5
subf r4,r3,r4
add r4,r4,r5
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
srwi. r4,r4,L1_CACHE_SHIFT
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
beqlr
mtctr r4
1: dcbi 0,r3
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
addi r3,r3,L1_CACHE_BYTES
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
bdnz 1b
sync /* wait for dcbi's to get to ram */
blr
/*
* Flush a particular page from the data cache to RAM.
* Note: this is necessary because the instruction cache does *not*
* snoop from the data cache.
* This is a no-op on the 601 which has a unified cache.
*
* void __flush_dcache_icache(void *page)
*/
_GLOBAL(__flush_dcache_icache)
BEGIN_FTR_SECTION
powerpc: purge all the prefetched instructions for the coherent icache flush As Benjamin Herrenschmidt has indicated, we still need a dummy icbi to purge all the prefetched instructions from the ifetch buffers for the snooping icache. We also need a sync before the icbi to order the actual stores to memory that might have modified instructions with the icbi. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-22 09:30:35 +08:00
PURGE_PREFETCHED_INS
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 14:52:57 +10:00
blr
END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
powerpc/44x: Support 16K/64K base page sizes on 44x This adds support for 16k and 64k page sizes on PowerPC 44x processors. The PGDIR table is much smaller than a page when using 16k or 64k pages (512 and 32 bytes respectively) so we allocate the PGDIR with kzalloc() instead of __get_free_pages(). One PTE table covers rather a large memory area when using 16k or 64k pages (32MB or 512MB respectively), so we can easily put FIXMAP and PKMAP in the area covered by one PTE table. Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Vladimir Panfilov <pvr@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-11 04:55:41 +03:00
rlwinm r3,r3,0,0,31-PAGE_SHIFT /* Get page base address */
li r4,PAGE_SIZE/L1_CACHE_BYTES /* Number of lines in a page */
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
mtctr r4
mr r6,r3
0: dcbst 0,r3 /* Write line to ram */
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
addi r3,r3,L1_CACHE_BYTES
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
bdnz 0b
sync
powerpc/47x: Base ppc476 support This patch adds the base support for the 476 processor. The code was primarily written by Ben Herrenschmidt and Torez Smith, but I've been maintaining it for a while. The goal is to have a single binary that will run on 44x and 47x, but we still have some details to work out. The biggest is that the L1 cache line size differs on the two platforms, but it's currently a compile-time option. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Torez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-03-05 10:43:12 +00:00
#ifdef CONFIG_44x
[POWERPC] 4xx: Deal with 44x virtually tagged icache The 44x family has an interesting "feature" which is a virtually tagged instruction cache (yuck !). So far, we haven't dealt with it properly, which means we've been mostly lucky or people didn't report the problems, unless people have been running custom patches in their distro... This is an attempt at fixing it properly. I chose to do it by setting a global flag whenever we change a PTE that was previously marked executable, and flush the entire instruction cache upon return to user space when that happens. This is a bit heavy handed, but it's hard to do more fine grained flushes as the icbi instruction, on those processor, for some very strange reasons (since the cache is virtually mapped) still requires a valid TLB entry for reading in the target address space, which isn't something I want to deal with. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-31 16:42:19 +11:00
/* We don't flush the icache on 44x. Those have a virtual icache
* and we don't have access to the virtual address here (it's
* not the page vaddr but where it's mapped in user space). The
* flushing of the icache on these is handled elsewhere, when
* a change in the address space occurs, before returning to
* user space
*/
powerpc/47x: Base ppc476 support This patch adds the base support for the 476 processor. The code was primarily written by Ben Herrenschmidt and Torez Smith, but I've been maintaining it for a while. The goal is to have a single binary that will run on 44x and 47x, but we still have some details to work out. The biggest is that the L1 cache line size differs on the two platforms, but it's currently a compile-time option. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Torez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-03-05 10:43:12 +00:00
BEGIN_MMU_FTR_SECTION
blr
END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_44x)
#endif /* CONFIG_44x */
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
mtctr r4
1: icbi 0,r6
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
addi r6,r6,L1_CACHE_BYTES
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
bdnz 1b
sync
isync
blr
powerpc/47x: Base ppc476 support This patch adds the base support for the 476 processor. The code was primarily written by Ben Herrenschmidt and Torez Smith, but I've been maintaining it for a while. The goal is to have a single binary that will run on 44x and 47x, but we still have some details to work out. The biggest is that the L1 cache line size differs on the two platforms, but it's currently a compile-time option. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Torez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-03-05 10:43:12 +00:00
#ifndef CONFIG_BOOKE
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
/*
* Flush a particular page from the data cache to RAM, identified
* by its physical address. We turn off the MMU so we can just use
* the physical address (this may be a highmem page without a kernel
* mapping).
*
* void __flush_dcache_icache_phys(unsigned long physaddr)
*/
_GLOBAL(__flush_dcache_icache_phys)
BEGIN_FTR_SECTION
powerpc: purge all the prefetched instructions for the coherent icache flush As Benjamin Herrenschmidt has indicated, we still need a dummy icbi to purge all the prefetched instructions from the ifetch buffers for the snooping icache. We also need a sync before the icbi to order the actual stores to memory that might have modified instructions with the icbi. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-22 09:30:35 +08:00
PURGE_PREFETCHED_INS
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
blr /* for 601, do nothing */
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 14:52:57 +10:00
END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
mfmsr r10
rlwinm r0,r10,0,28,26 /* clear DR */
mtmsr r0
isync
powerpc/44x: Support 16K/64K base page sizes on 44x This adds support for 16k and 64k page sizes on PowerPC 44x processors. The PGDIR table is much smaller than a page when using 16k or 64k pages (512 and 32 bytes respectively) so we allocate the PGDIR with kzalloc() instead of __get_free_pages(). One PTE table covers rather a large memory area when using 16k or 64k pages (32MB or 512MB respectively), so we can easily put FIXMAP and PKMAP in the area covered by one PTE table. Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Vladimir Panfilov <pvr@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-11 04:55:41 +03:00
rlwinm r3,r3,0,0,31-PAGE_SHIFT /* Get page base address */
li r4,PAGE_SIZE/L1_CACHE_BYTES /* Number of lines in a page */
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
mtctr r4
mr r6,r3
0: dcbst 0,r3 /* Write line to ram */
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
addi r3,r3,L1_CACHE_BYTES
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
bdnz 0b
sync
mtctr r4
1: icbi 0,r6
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
addi r6,r6,L1_CACHE_BYTES
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
bdnz 1b
sync
mtmsr r10 /* restore DR */
isync
blr
powerpc/47x: Base ppc476 support This patch adds the base support for the 476 processor. The code was primarily written by Ben Herrenschmidt and Torez Smith, but I've been maintaining it for a while. The goal is to have a single binary that will run on 44x and 47x, but we still have some details to work out. The biggest is that the L1 cache line size differs on the two platforms, but it's currently a compile-time option. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Torez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-03-05 10:43:12 +00:00
#endif /* CONFIG_BOOKE */
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
/*
* Clear pages using the dcbz instruction, which doesn't cause any
* memory traffic (except to write out any cache lines which get
* displaced). This only works on cacheable memory.
*
* void clear_pages(void *page, int order) ;
*/
_GLOBAL(clear_pages)
powerpc/44x: Support 16K/64K base page sizes on 44x This adds support for 16k and 64k page sizes on PowerPC 44x processors. The PGDIR table is much smaller than a page when using 16k or 64k pages (512 and 32 bytes respectively) so we allocate the PGDIR with kzalloc() instead of __get_free_pages(). One PTE table covers rather a large memory area when using 16k or 64k pages (32MB or 512MB respectively), so we can easily put FIXMAP and PKMAP in the area covered by one PTE table. Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Vladimir Panfilov <pvr@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-11 04:55:41 +03:00
li r0,PAGE_SIZE/L1_CACHE_BYTES
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
slw r0,r0,r4
mtctr r0
1: dcbz 0,r3
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
addi r3,r3,L1_CACHE_BYTES
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
bdnz 1b
blr
/*
* Copy a whole page. We use the dcbz instruction on the destination
* to reduce memory traffic (it eliminates the unnecessary reads of
* the destination into cache). This requires that the destination
* is cacheable.
*/
#define COPY_16_BYTES \
lwz r6,4(r4); \
lwz r7,8(r4); \
lwz r8,12(r4); \
lwzu r9,16(r4); \
stw r6,4(r3); \
stw r7,8(r3); \
stw r8,12(r3); \
stwu r9,16(r3)
_GLOBAL(copy_page)
addi r3,r3,-4
addi r4,r4,-4
li r5,4
#if MAX_COPY_PREFETCH > 1
li r0,MAX_COPY_PREFETCH
li r11,4
mtctr r0
11: dcbt r11,r4
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
addi r11,r11,L1_CACHE_BYTES
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
bdnz 11b
#else /* MAX_COPY_PREFETCH == 1 */
dcbt r5,r4
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
li r11,L1_CACHE_BYTES+4
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
#endif /* MAX_COPY_PREFETCH */
powerpc/44x: Support 16K/64K base page sizes on 44x This adds support for 16k and 64k page sizes on PowerPC 44x processors. The PGDIR table is much smaller than a page when using 16k or 64k pages (512 and 32 bytes respectively) so we allocate the PGDIR with kzalloc() instead of __get_free_pages(). One PTE table covers rather a large memory area when using 16k or 64k pages (32MB or 512MB respectively), so we can easily put FIXMAP and PKMAP in the area covered by one PTE table. Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Vladimir Panfilov <pvr@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-11 04:55:41 +03:00
li r0,PAGE_SIZE/L1_CACHE_BYTES - MAX_COPY_PREFETCH
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
crclr 4*cr0+eq
2:
mtctr r0
1:
dcbt r11,r4
dcbz r5,r3
COPY_16_BYTES
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
#if L1_CACHE_BYTES >= 32
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
COPY_16_BYTES
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
#if L1_CACHE_BYTES >= 64
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
COPY_16_BYTES
COPY_16_BYTES
ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
#if L1_CACHE_BYTES >= 128
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
COPY_16_BYTES
COPY_16_BYTES
COPY_16_BYTES
COPY_16_BYTES
#endif
#endif
#endif
bdnz 1b
beqlr
crnot 4*cr0+eq,4*cr0+eq
li r0,MAX_COPY_PREFETCH
li r11,4
b 2b
/*
* void atomic_clear_mask(atomic_t mask, atomic_t *addr)
* void atomic_set_mask(atomic_t mask, atomic_t *addr);
*/
_GLOBAL(atomic_clear_mask)
10: lwarx r5,0,r4
andc r5,r5,r3
PPC405_ERR77(0,r4)
stwcx. r5,0,r4
bne- 10b
blr
_GLOBAL(atomic_set_mask)
10: lwarx r5,0,r4
or r5,r5,r3
PPC405_ERR77(0,r4)
stwcx. r5,0,r4
bne- 10b
blr
/*
* Extended precision shifts.
*
* Updated to be valid for shift counts from 0 to 63 inclusive.
* -- Gabriel
*
* R3/R4 has 64 bit value
* R5 has shift count
* result in R3/R4
*
* ashrdi3: arithmetic right shift (sign propagation)
* lshrdi3: logical right shift
* ashldi3: left shift
*/
_GLOBAL(__ashrdi3)
subfic r6,r5,32
srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count
addi r7,r5,32 # could be xori, or addi with -32
slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count)
rlwinm r8,r7,0,32 # t3 = (count < 32) ? 32 : 0
sraw r7,r3,r7 # t2 = MSW >> (count-32)
or r4,r4,r6 # LSW |= t1
slw r7,r7,r8 # t2 = (count < 32) ? 0 : t2
sraw r3,r3,r5 # MSW = MSW >> count
or r4,r4,r7 # LSW |= t2
blr
_GLOBAL(__ashldi3)
subfic r6,r5,32
slw r3,r3,r5 # MSW = count > 31 ? 0 : MSW << count
addi r7,r5,32 # could be xori, or addi with -32
srw r6,r4,r6 # t1 = count > 31 ? 0 : LSW >> (32-count)
slw r7,r4,r7 # t2 = count < 32 ? 0 : LSW << (count-32)
or r3,r3,r6 # MSW |= t1
slw r4,r4,r5 # LSW = LSW << count
or r3,r3,r7 # MSW |= t2
blr
_GLOBAL(__lshrdi3)
subfic r6,r5,32
srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count
addi r7,r5,32 # could be xori, or addi with -32
slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count)
srw r7,r3,r7 # t2 = count < 32 ? 0 : MSW >> (count-32)
or r4,r4,r6 # LSW |= t1
srw r3,r3,r5 # MSW = MSW >> count
or r4,r4,r7 # LSW |= t2
blr
powerpc: Added __cmpdi2 for signed 64bit comparision This was missing on powerpc and I am getting compilation error drivers/vfio/pci/vfio_pci_rdwr.c:193: undefined reference to `__cmpdi2' drivers/vfio/pci/vfio_pci_rdwr.c:193: undefined reference to `__cmpdi2' Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-09 10:41:17 +05:30
/*
* 64-bit comparison: __cmpdi2(s64 a, s64 b)
* Returns 0 if a < b, 1 if a == b, 2 if a > b.
*/
_GLOBAL(__cmpdi2)
cmpw r3,r5
li r3,1
bne 1f
cmplw r4,r6
beqlr
1: li r3,0
bltlr
li r3,2
blr
[POWERPC] Add __ucmpdi2 for 64-bit comparisons in 32-bit kernels Some drivers (such as V4L2) have code that causes gcc to generate calls to __ucmpdi2 when compiling for 32-bit powerpc, which results in either a link-time error or a module that can't be loaded, as we don't currently have a __ucmpdi2. This adds one so these drivers can be used. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-13 09:39:55 +11:00
/*
* 64-bit comparison: __ucmpdi2(u64 a, u64 b)
* Returns 0 if a < b, 1 if a == b, 2 if a > b.
*/
_GLOBAL(__ucmpdi2)
cmplw r3,r5
li r3,1
bne 1f
cmplw r4,r6
beqlr
1: li r3,0
bltlr
li r3,2
blr
powerpc: Provide __bswapdi2 Some versions of GCC apparently expect this to be provided by libgcc. Updates from Mikey to fix 32 bit version and adding "r" to registers. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-13 00:23:38 +00:00
_GLOBAL(__bswapdi2)
rotlwi r9,r4,8
rotlwi r10,r3,8
rlwimi r9,r4,24,0,7
rlwimi r10,r3,24,0,7
rlwimi r9,r4,24,16,23
rlwimi r10,r3,24,16,23
mr r3,r9
mr r4,r10
blr
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
_GLOBAL(abs)
srawi r4,r3,31
xor r3,r3,r4
sub r3,r3,r4
blr
powerpc/smp: Make start_secondary_resume available to all CPU variants This should fix SMP & Hotplug builds on FSL BookE and 476 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 13:07:12 +10:00
#ifdef CONFIG_SMP
_GLOBAL(start_secondary_resume)
/* Reset stack */
powerpc: Use CURRENT_THREAD_INFO instead of open coded assembly Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-05 04:41:35 +00:00
CURRENT_THREAD_INFO(r1, r1)
powerpc/smp: Make start_secondary_resume available to all CPU variants This should fix SMP & Hotplug builds on FSL BookE and 476 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 13:07:12 +10:00
addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
li r3,0
powerpc: Fix 32-bit SMP build Commit 69e3cea8d5fd526 ("powerpc/smp: Make start_secondary_resume available to all CPU variants") introduced start_secondary_resume to misc_32.S, however it uses a 64-bit instruction which is not valid on 32-bit platforms. Use 'stw' instead. Reported-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-20 16:22:25 -04:00
stw r3,0(r1) /* Zero the stack frame pointer */
powerpc/smp: Make start_secondary_resume available to all CPU variants This should fix SMP & Hotplug builds on FSL BookE and 476 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 13:07:12 +10:00
bl start_secondary
b .
#endif /* CONFIG_SMP */
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:36:14 +10:00
/*
* This routine is just here to keep GCC happy - sigh...
*/
_GLOBAL(__main)
blr
[PATCH] powerpc: Merge kexec This patch merges, to some extent, the PPC32 and PPC64 kexec implementations. We adopt the PPC32 approach of having ppc_md callbacks for the kexec functions. The current PPC64 implementation becomes the "default" implementation for PPC64 which platforms can select if they need no special treatment. I've added these default callbacks to pseries/maple/cell/powermac, this means iSeries no longer supports kexec - but it never worked anyway. I've renamed PPC32's machine_kexec_simple to default_machine_kexec, inline with PPC64. Judging by the comments it might be better named machine_kexec_non_of, or something, but at the moment it's the only implementation for PPC32 so it's the "default". Kexec requires machine_shutdown(), which is in machine_kexec.c on PPC32, but we already have in setup-common.c on powerpc. All this does is call ppc_md.nvram_sync, which only powermac implements, so instead make machine_shutdown a ppc_md member and have it call core99_nvram_sync directly on powermac. I've also stuck relocate_kernel.S into misc_32.S for powerpc. Built for ARCH=ppc, and 32 & 64 bit ARCH=powerpc, with KEXEC=y/n. Booted on P5 LPAR and successfully kexec'ed. Should apply on top of 493f25ef4087395891c99fcfe2c72e62e293e89f. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14 23:35:00 +11:00
#ifdef CONFIG_KEXEC
/*
* Must be relocatable PIC code callable as a C function.
*/
.globl relocate_new_kernel
relocate_new_kernel:
/* r3 = page_list */
/* r4 = reboot_code_buffer */
/* r5 = start_address */
powerpc/kexec: Add support for FSL-BookE This adds support kexec on FSL-BookE where the MMU can not be simply switched off. The code borrows the initial MMU-setup code to create the identical mapping mapping. The only difference to the original boot code is the size of the mapping(s) and the executeable address. The kexec code maps the first 2 GiB of memory in 256 MiB steps. This should work also on e500v1 boxes. SMP support is still not available. (Kumar: Added minor change to build to ifdef CONFIG_PPC_STD_MMU_64 some code that was PPC64 specific) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-04 22:19:03 +02:00
#ifdef CONFIG_FSL_BOOKE
mr r29, r3
mr r30, r4
mr r31, r5
#define ENTRY_MAPPING_KEXEC_SETUP
#include "fsl_booke_entry_mapping.S"
#undef ENTRY_MAPPING_KEXEC_SETUP
mr r3, r29
mr r4, r30
mr r5, r31
powerpc/44x: Kexec support for PPC440X chipsets This patch adds kexec support for PPC440 based chipsets. This work is based on the KEXEC patches for FSL BookE. The FSL BookE patch and the code flow could be found at the link below: http://patchwork.ozlabs.org/patch/49359/ Steps: 1) Invalidate all the TLB entries except the one this code is run from 2) Create a tmp mapping for our code in the other address space and jump to it 3) Invalidate the entry we used 4) Create a 1:1 mapping for 0-2GiB in blocks of 256M 5) Jump to the new 1:1 mapping and invalidate the tmp mapping I have tested this patches on Ebony, Sequoia boards and Virtex on QEMU. You need kexec-tools commit e8b7939b1e or newer for ppc440x support, available at: git://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git Signed-off-by: Suzuki Poulose <suzuki@in.ibm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-07-18 03:29:20 +00:00
li r0, 0
powerpc/47x: Kernel support for KEXEC This patch adds support for creating 1:1 mapping for the PPC_47x during a KEXEC. The implementation is similar to that of the PPC440x which is described here : http://patchwork.ozlabs.org/patch/104323/ PPC_47x MMU : The 47x uses Unified TLB 1024 entries, with 4-way associative mapping (4 x 256 entries). The index to be used is calculated by the MMU by hashing the PID, EPN and TS. The software can choose to specify the way by setting bit 0(enable way select) and the way in bits 1-2 in the TLB Word 0. Implementation: The patch erases all the UTLB entries which includes the tlb covering the mapping for our code. The shadow TLB caches the mapping for the running code which helps us to continue the execution until we do isync/rfi. We then create a tmp mapping for the current code in the other address space (TS) and switch to it. Then we create a 1:1 mapping(EPN=RPN) for 0-2GiB in the original address space and switch to the new mapping. TODO: Add SMP support. Signed-off-by: Suzuki K. Poulose <suzuki@in.ibm.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2012-04-15 22:27:18 +00:00
#elif defined(CONFIG_44x)
powerpc/44x: Kexec support for PPC440X chipsets This patch adds kexec support for PPC440 based chipsets. This work is based on the KEXEC patches for FSL BookE. The FSL BookE patch and the code flow could be found at the link below: http://patchwork.ozlabs.org/patch/49359/ Steps: 1) Invalidate all the TLB entries except the one this code is run from 2) Create a tmp mapping for our code in the other address space and jump to it 3) Invalidate the entry we used 4) Create a 1:1 mapping for 0-2GiB in blocks of 256M 5) Jump to the new 1:1 mapping and invalidate the tmp mapping I have tested this patches on Ebony, Sequoia boards and Virtex on QEMU. You need kexec-tools commit e8b7939b1e or newer for ppc440x support, available at: git://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git Signed-off-by: Suzuki Poulose <suzuki@in.ibm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-07-18 03:29:20 +00:00
powerpc/47x: Kernel support for KEXEC This patch adds support for creating 1:1 mapping for the PPC_47x during a KEXEC. The implementation is similar to that of the PPC440x which is described here : http://patchwork.ozlabs.org/patch/104323/ PPC_47x MMU : The 47x uses Unified TLB 1024 entries, with 4-way associative mapping (4 x 256 entries). The index to be used is calculated by the MMU by hashing the PID, EPN and TS. The software can choose to specify the way by setting bit 0(enable way select) and the way in bits 1-2 in the TLB Word 0. Implementation: The patch erases all the UTLB entries which includes the tlb covering the mapping for our code. The shadow TLB caches the mapping for the running code which helps us to continue the execution until we do isync/rfi. We then create a tmp mapping for the current code in the other address space (TS) and switch to it. Then we create a 1:1 mapping(EPN=RPN) for 0-2GiB in the original address space and switch to the new mapping. TODO: Add SMP support. Signed-off-by: Suzuki K. Poulose <suzuki@in.ibm.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2012-04-15 22:27:18 +00:00
/* Save our parameters */
mr r29, r3
mr r30, r4
mr r31, r5
#ifdef CONFIG_PPC_47x
/* Check for 47x cores */
mfspr r3,SPRN_PVR
srwi r3,r3,16
cmplwi cr0,r3,PVR_476@h
beq setup_map_47x
cmplwi cr0,r3,PVR_476_ISS@h
beq setup_map_47x
#endif /* CONFIG_PPC_47x */
powerpc/44x: Kexec support for PPC440X chipsets This patch adds kexec support for PPC440 based chipsets. This work is based on the KEXEC patches for FSL BookE. The FSL BookE patch and the code flow could be found at the link below: http://patchwork.ozlabs.org/patch/49359/ Steps: 1) Invalidate all the TLB entries except the one this code is run from 2) Create a tmp mapping for our code in the other address space and jump to it 3) Invalidate the entry we used 4) Create a 1:1 mapping for 0-2GiB in blocks of 256M 5) Jump to the new 1:1 mapping and invalidate the tmp mapping I have tested this patches on Ebony, Sequoia boards and Virtex on QEMU. You need kexec-tools commit e8b7939b1e or newer for ppc440x support, available at: git://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git Signed-off-by: Suzuki Poulose <suzuki@in.ibm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-07-18 03:29:20 +00:00
/*
* Code for setting up 1:1 mapping for PPC440x for KEXEC
*
* We cannot switch off the MMU on PPC44x.
* So we:
* 1) Invalidate all the mappings except the one we are running from.
* 2) Create a tmp mapping for our code in the other address space(TS) and
* jump to it. Invalidate the entry we started in.
* 3) Create a 1:1 mapping for 0-2GiB in chunks of 256M in original TS.
* 4) Jump to the 1:1 mapping in original TS.
* 5) Invalidate the tmp mapping.
*
* - Based on the kexec support code for FSL BookE
*
*/
powerpc/44x: Fix/Initialize PID to kernel PID before the TLB search Initialize the PID register with kernel pid (0) before we start setting the TLB mapping for KEXEC. Also set the MMUCR[TID] to kernel PID. This was spotted while testing the kexec on ISS for 47x. ISS doesn't return a successful tlbsx for a kernel address with PID set to a user PID. Though the hardware/qemu/simics work fine. This patch is harmless and initializes the PID to 0 (kernel PID) which is usually the case during a normal kernel boot. This would fix the kexec on ISS for 440. I have tested this patch on sequoia board. Signed-off-by: Suzuki K Poulose <suzuki@in.ibm.com> Cc: Josh Boyer <jwboyer@gmail.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2012-04-15 21:48:21 +00:00
/*
* Load the PID with kernel PID (0).
* Also load our MSR_IS and TID to MMUCR for TLB search.
*/
li r3, 0
mtspr SPRN_PID, r3
powerpc/44x: Kexec support for PPC440X chipsets This patch adds kexec support for PPC440 based chipsets. This work is based on the KEXEC patches for FSL BookE. The FSL BookE patch and the code flow could be found at the link below: http://patchwork.ozlabs.org/patch/49359/ Steps: 1) Invalidate all the TLB entries except the one this code is run from 2) Create a tmp mapping for our code in the other address space and jump to it 3) Invalidate the entry we used 4) Create a 1:1 mapping for 0-2GiB in blocks of 256M 5) Jump to the new 1:1 mapping and invalidate the tmp mapping I have tested this patches on Ebony, Sequoia boards and Virtex on QEMU. You need kexec-tools commit e8b7939b1e or newer for ppc440x support, available at: git://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git Signed-off-by: Suzuki Poulose <suzuki@in.ibm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-07-18 03:29:20 +00:00
mfmsr r4
andi. r4,r4,MSR_IS@l
beq wmmucr
oris r3,r3,PPC44x_MMUCR_STS@h
wmmucr:
mtspr SPRN_MMUCR,r3
sync
/*
* Invalidate all the TLB entries except the current entry
* where we are running from
*/
bl 0f /* Find our address */
0: mflr r5 /* Make it accessible */
tlbsx r23,0,r5 /* Find entry we are in */
li r4,0 /* Start at TLB entry 0 */
li r3,0 /* Set PAGEID inval value */
1: cmpw r23,r4 /* Is this our entry? */
beq skip /* If so, skip the inval */
tlbwe r3,r4,PPC44x_TLB_PAGEID /* If not, inval the entry */
skip:
addi r4,r4,1 /* Increment */
cmpwi r4,64 /* Are we done? */
bne 1b /* If not, repeat */
isync
/* Create a temp mapping and jump to it */
andi. r6, r23, 1 /* Find the index to use */
addi r24, r6, 1 /* r24 will contain 1 or 2 */
mfmsr r9 /* get the MSR */
rlwinm r5, r9, 27, 31, 31 /* Extract the MSR[IS] */
xori r7, r5, 1 /* Use the other address space */
/* Read the current mapping entries */
tlbre r3, r23, PPC44x_TLB_PAGEID
tlbre r4, r23, PPC44x_TLB_XLAT
tlbre r5, r23, PPC44x_TLB_ATTRIB
/* Save our current XLAT entry */
mr r25, r4
/* Extract the TLB PageSize */
li r10, 1 /* r10 will hold PageSize */
rlwinm r11, r3, 0, 24, 27 /* bits 24-27 */
/* XXX: As of now we use 256M, 4K pages */
cmpwi r11, PPC44x_TLB_256M
bne tlb_4k
rotlwi r10, r10, 28 /* r10 = 256M */
b write_out
tlb_4k:
cmpwi r11, PPC44x_TLB_4K
bne default
rotlwi r10, r10, 12 /* r10 = 4K */
b write_out
default:
rotlwi r10, r10, 10 /* r10 = 1K */
write_out:
/*
* Write out the tmp 1:1 mapping for this code in other address space
* Fixup EPN = RPN , TS=other address space
*/
insrwi r3, r7, 1, 23 /* Bit 23 is TS for PAGEID field */
/* Write out the tmp mapping entries */
tlbwe r3, r24, PPC44x_TLB_PAGEID
tlbwe r4, r24, PPC44x_TLB_XLAT
tlbwe r5, r24, PPC44x_TLB_ATTRIB
subi r11, r10, 1 /* PageOffset Mask = PageSize - 1 */
not r10, r11 /* Mask for PageNum */
/* Switch to other address space in MSR */
insrwi r9, r7, 1, 26 /* Set MSR[IS] = r7 */
bl 1f
1: mflr r8
addi r8, r8, (2f-1b) /* Find the target offset */
/* Jump to the tmp mapping */
mtspr SPRN_SRR0, r8
mtspr SPRN_SRR1, r9
rfi
2:
/* Invalidate the entry we were executing from */
li r3, 0
tlbwe r3, r23, PPC44x_TLB_PAGEID
/* attribute fields. rwx for SUPERVISOR mode */
li r5, 0
ori r5, r5, (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
/* Create 1:1 mapping in 256M pages */
xori r7, r7, 1 /* Revert back to Original TS */
li r8, 0 /* PageNumber */
li r6, 3 /* TLB Index, start at 3 */
next_tlb:
rotlwi r3, r8, 28 /* Create EPN (bits 0-3) */
mr r4, r3 /* RPN = EPN */
ori r3, r3, (PPC44x_TLB_VALID | PPC44x_TLB_256M) /* SIZE = 256M, Valid */
insrwi r3, r7, 1, 23 /* Set TS from r7 */
tlbwe r3, r6, PPC44x_TLB_PAGEID /* PageID field : EPN, V, SIZE */
tlbwe r4, r6, PPC44x_TLB_XLAT /* Address translation : RPN */
tlbwe r5, r6, PPC44x_TLB_ATTRIB /* Attributes */
addi r8, r8, 1 /* Increment PN */
addi r6, r6, 1 /* Increment TLB Index */
cmpwi r8, 8 /* Are we done ? */
bne next_tlb
isync
/* Jump to the new mapping 1:1 */
li r9,0
insrwi r9, r7, 1, 26 /* Set MSR[IS] = r7 */
bl 1f
1: mflr r8
and r8, r8, r11 /* Get our offset within page */
addi r8, r8, (2f-1b)
and r5, r25, r10 /* Get our target PageNum */
or r8, r8, r5 /* Target jump address */
mtspr SPRN_SRR0, r8
mtspr SPRN_SRR1, r9
rfi
2:
/* Invalidate the tmp entry we used */
li r3, 0
tlbwe r3, r24, PPC44x_TLB_PAGEID
sync
powerpc/47x: Kernel support for KEXEC This patch adds support for creating 1:1 mapping for the PPC_47x during a KEXEC. The implementation is similar to that of the PPC440x which is described here : http://patchwork.ozlabs.org/patch/104323/ PPC_47x MMU : The 47x uses Unified TLB 1024 entries, with 4-way associative mapping (4 x 256 entries). The index to be used is calculated by the MMU by hashing the PID, EPN and TS. The software can choose to specify the way by setting bit 0(enable way select) and the way in bits 1-2 in the TLB Word 0. Implementation: The patch erases all the UTLB entries which includes the tlb covering the mapping for our code. The shadow TLB caches the mapping for the running code which helps us to continue the execution until we do isync/rfi. We then create a tmp mapping for the current code in the other address space (TS) and switch to it. Then we create a 1:1 mapping(EPN=RPN) for 0-2GiB in the original address space and switch to the new mapping. TODO: Add SMP support. Signed-off-by: Suzuki K. Poulose <suzuki@in.ibm.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2012-04-15 22:27:18 +00:00
b ppc44x_map_done
#ifdef CONFIG_PPC_47x
/* 1:1 mapping for 47x */
setup_map_47x:
/*
* Load the kernel pid (0) to PID and also to MMUCR[TID].
* Also set the MSR IS->MMUCR STS
*/
li r3, 0
mtspr SPRN_PID, r3 /* Set PID */
mfmsr r4 /* Get MSR */
andi. r4, r4, MSR_IS@l /* TS=1? */
beq 1f /* If not, leave STS=0 */
oris r3, r3, PPC47x_MMUCR_STS@h /* Set STS=1 */
1: mtspr SPRN_MMUCR, r3 /* Put MMUCR */
sync
/* Find the entry we are running from */
bl 2f
2: mflr r23
tlbsx r23, 0, r23
tlbre r24, r23, 0 /* TLB Word 0 */
tlbre r25, r23, 1 /* TLB Word 1 */
tlbre r26, r23, 2 /* TLB Word 2 */
/*
* Invalidates all the tlb entries by writing to 256 RPNs(r4)
* of 4k page size in all 4 ways (0-3 in r3).
* This would invalidate the entire UTLB including the one we are
* running from. However the shadow TLB entries would help us
* to continue the execution, until we flush them (rfi/isync).
*/
addis r3, 0, 0x8000 /* specify the way */
addi r4, 0, 0 /* TLB Word0 = (EPN=0, VALID = 0) */
addi r5, 0, 0
b clear_utlb_entry
/* Align the loop to speed things up. from head_44x.S */
.align 6
clear_utlb_entry:
tlbwe r4, r3, 0
tlbwe r5, r3, 1
tlbwe r5, r3, 2
addis r3, r3, 0x2000 /* Increment the way */
cmpwi r3, 0
bne clear_utlb_entry
addis r3, 0, 0x8000
addis r4, r4, 0x100 /* Increment the EPN */
cmpwi r4, 0
bne clear_utlb_entry
/* Create the entries in the other address space */
mfmsr r5
rlwinm r7, r5, 27, 31, 31 /* Get the TS (Bit 26) from MSR */
xori r7, r7, 1 /* r7 = !TS */
insrwi r24, r7, 1, 21 /* Change the TS in the saved TLB word 0 */
/*
* write out the TLB entries for the tmp mapping
* Use way '0' so that we could easily invalidate it later.
*/
lis r3, 0x8000 /* Way '0' */
tlbwe r24, r3, 0
tlbwe r25, r3, 1
tlbwe r26, r3, 2
/* Update the msr to the new TS */
insrwi r5, r7, 1, 26
bl 1f
1: mflr r6
addi r6, r6, (2f-1b)
mtspr SPRN_SRR0, r6
mtspr SPRN_SRR1, r5
rfi
/*
* Now we are in the tmp address space.
* Create a 1:1 mapping for 0-2GiB in the original TS.
*/
2:
li r3, 0
li r4, 0 /* TLB Word 0 */
li r5, 0 /* TLB Word 1 */
li r6, 0
ori r6, r6, PPC47x_TLB2_S_RWX /* TLB word 2 */
li r8, 0 /* PageIndex */
xori r7, r7, 1 /* revert back to original TS */
write_utlb:
rotlwi r5, r8, 28 /* RPN = PageIndex * 256M */
/* ERPN = 0 as we don't use memory above 2G */
mr r4, r5 /* EPN = RPN */
ori r4, r4, (PPC47x_TLB0_VALID | PPC47x_TLB0_256M)
insrwi r4, r7, 1, 21 /* Insert the TS to Word 0 */
tlbwe r4, r3, 0 /* Write out the entries */
tlbwe r5, r3, 1
tlbwe r6, r3, 2
addi r8, r8, 1
cmpwi r8, 8 /* Have we completed ? */
bne write_utlb
/* make sure we complete the TLB write up */
isync
/*
* Prepare to jump to the 1:1 mapping.
* 1) Extract page size of the tmp mapping
* DSIZ = TLB_Word0[22:27]
* 2) Calculate the physical address of the address
* to jump to.
*/
rlwinm r10, r24, 0, 22, 27
cmpwi r10, PPC47x_TLB0_4K
bne 0f
li r10, 0x1000 /* r10 = 4k */
bl 1f
0:
/* Defaults to 256M */
lis r10, 0x1000
bl 1f
1: mflr r4
addi r4, r4, (2f-1b) /* virtual address of 2f */
subi r11, r10, 1 /* offsetmask = Pagesize - 1 */
not r10, r11 /* Pagemask = ~(offsetmask) */
and r5, r25, r10 /* Physical page */
and r6, r4, r11 /* offset within the current page */
or r5, r5, r6 /* Physical address for 2f */
/* Switch the TS in MSR to the original one */
mfmsr r8
insrwi r8, r7, 1, 26
mtspr SPRN_SRR1, r8
mtspr SPRN_SRR0, r5
rfi
2:
/* Invalidate the tmp mapping */
lis r3, 0x8000 /* Way '0' */
clrrwi r24, r24, 12 /* Clear the valid bit */
tlbwe r24, r3, 0
tlbwe r25, r3, 1
tlbwe r26, r3, 2
/* Make sure we complete the TLB write and flush the shadow TLB */
isync
#endif
ppc44x_map_done:
powerpc/44x: Kexec support for PPC440X chipsets This patch adds kexec support for PPC440 based chipsets. This work is based on the KEXEC patches for FSL BookE. The FSL BookE patch and the code flow could be found at the link below: http://patchwork.ozlabs.org/patch/49359/ Steps: 1) Invalidate all the TLB entries except the one this code is run from 2) Create a tmp mapping for our code in the other address space and jump to it 3) Invalidate the entry we used 4) Create a 1:1 mapping for 0-2GiB in blocks of 256M 5) Jump to the new 1:1 mapping and invalidate the tmp mapping I have tested this patches on Ebony, Sequoia boards and Virtex on QEMU. You need kexec-tools commit e8b7939b1e or newer for ppc440x support, available at: git://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git Signed-off-by: Suzuki Poulose <suzuki@in.ibm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-07-18 03:29:20 +00:00
/* Restore the parameters */
mr r3, r29
mr r4, r30
mr r5, r31
powerpc/kexec: Add support for FSL-BookE This adds support kexec on FSL-BookE where the MMU can not be simply switched off. The code borrows the initial MMU-setup code to create the identical mapping mapping. The only difference to the original boot code is the size of the mapping(s) and the executeable address. The kexec code maps the first 2 GiB of memory in 256 MiB steps. This should work also on e500v1 boxes. SMP support is still not available. (Kumar: Added minor change to build to ifdef CONFIG_PPC_STD_MMU_64 some code that was PPC64 specific) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-04 22:19:03 +02:00
li r0, 0
#else
[PATCH] powerpc: Merge kexec This patch merges, to some extent, the PPC32 and PPC64 kexec implementations. We adopt the PPC32 approach of having ppc_md callbacks for the kexec functions. The current PPC64 implementation becomes the "default" implementation for PPC64 which platforms can select if they need no special treatment. I've added these default callbacks to pseries/maple/cell/powermac, this means iSeries no longer supports kexec - but it never worked anyway. I've renamed PPC32's machine_kexec_simple to default_machine_kexec, inline with PPC64. Judging by the comments it might be better named machine_kexec_non_of, or something, but at the moment it's the only implementation for PPC32 so it's the "default". Kexec requires machine_shutdown(), which is in machine_kexec.c on PPC32, but we already have in setup-common.c on powerpc. All this does is call ppc_md.nvram_sync, which only powermac implements, so instead make machine_shutdown a ppc_md member and have it call core99_nvram_sync directly on powermac. I've also stuck relocate_kernel.S into misc_32.S for powerpc. Built for ARCH=ppc, and 32 & 64 bit ARCH=powerpc, with KEXEC=y/n. Booted on P5 LPAR and successfully kexec'ed. Should apply on top of 493f25ef4087395891c99fcfe2c72e62e293e89f. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14 23:35:00 +11:00
li r0, 0
/*
* Set Machine Status Register to a known status,
* switch the MMU off and jump to 1: in a single step.
*/
mr r8, r0
ori r8, r8, MSR_RI|MSR_ME
mtspr SPRN_SRR1, r8
addi r8, r4, 1f - relocate_new_kernel
mtspr SPRN_SRR0, r8
sync
rfi
1:
powerpc/kexec: Add support for FSL-BookE This adds support kexec on FSL-BookE where the MMU can not be simply switched off. The code borrows the initial MMU-setup code to create the identical mapping mapping. The only difference to the original boot code is the size of the mapping(s) and the executeable address. The kexec code maps the first 2 GiB of memory in 256 MiB steps. This should work also on e500v1 boxes. SMP support is still not available. (Kumar: Added minor change to build to ifdef CONFIG_PPC_STD_MMU_64 some code that was PPC64 specific) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-04 22:19:03 +02:00
#endif
[PATCH] powerpc: Merge kexec This patch merges, to some extent, the PPC32 and PPC64 kexec implementations. We adopt the PPC32 approach of having ppc_md callbacks for the kexec functions. The current PPC64 implementation becomes the "default" implementation for PPC64 which platforms can select if they need no special treatment. I've added these default callbacks to pseries/maple/cell/powermac, this means iSeries no longer supports kexec - but it never worked anyway. I've renamed PPC32's machine_kexec_simple to default_machine_kexec, inline with PPC64. Judging by the comments it might be better named machine_kexec_non_of, or something, but at the moment it's the only implementation for PPC32 so it's the "default". Kexec requires machine_shutdown(), which is in machine_kexec.c on PPC32, but we already have in setup-common.c on powerpc. All this does is call ppc_md.nvram_sync, which only powermac implements, so instead make machine_shutdown a ppc_md member and have it call core99_nvram_sync directly on powermac. I've also stuck relocate_kernel.S into misc_32.S for powerpc. Built for ARCH=ppc, and 32 & 64 bit ARCH=powerpc, with KEXEC=y/n. Booted on P5 LPAR and successfully kexec'ed. Should apply on top of 493f25ef4087395891c99fcfe2c72e62e293e89f. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14 23:35:00 +11:00
/* from this point address translation is turned off */
/* and interrupts are disabled */
/* set a new stack at the bottom of our page... */
/* (not really needed now) */
powerpc/kexec: Fix up KEXEC_CONTROL_CODE_SIZE missed during conversion Commit 163f6876f5c3ff8215e900b93779e960a56b3694 missed one, resulting in the following compile error: AS arch/powerpc/kernel/misc_32.o arch/powerpc/kernel/misc_32.S: Assembler messages: arch/powerpc/kernel/misc_32.S:902: Error: unsupported relocation against KEXEC_CONTROL_CODE_SIZE make[2]: *** [arch/powerpc/kernel/misc_32.o] Error 1 make[1]: *** [arch/powerpc/kernel] Error 2 make: *** [vmlinux] Error 2 I grepped arch/ and found no further instances. Signed-off-by: Paul Collins <paul@ondioline.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-16 18:55:54 +10:00
addi r1, r4, KEXEC_CONTROL_PAGE_SIZE - 8 /* for LR Save+Back Chain */
[PATCH] powerpc: Merge kexec This patch merges, to some extent, the PPC32 and PPC64 kexec implementations. We adopt the PPC32 approach of having ppc_md callbacks for the kexec functions. The current PPC64 implementation becomes the "default" implementation for PPC64 which platforms can select if they need no special treatment. I've added these default callbacks to pseries/maple/cell/powermac, this means iSeries no longer supports kexec - but it never worked anyway. I've renamed PPC32's machine_kexec_simple to default_machine_kexec, inline with PPC64. Judging by the comments it might be better named machine_kexec_non_of, or something, but at the moment it's the only implementation for PPC32 so it's the "default". Kexec requires machine_shutdown(), which is in machine_kexec.c on PPC32, but we already have in setup-common.c on powerpc. All this does is call ppc_md.nvram_sync, which only powermac implements, so instead make machine_shutdown a ppc_md member and have it call core99_nvram_sync directly on powermac. I've also stuck relocate_kernel.S into misc_32.S for powerpc. Built for ARCH=ppc, and 32 & 64 bit ARCH=powerpc, with KEXEC=y/n. Booted on P5 LPAR and successfully kexec'ed. Should apply on top of 493f25ef4087395891c99fcfe2c72e62e293e89f. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14 23:35:00 +11:00
stw r0, 0(r1)
/* Do the copies */
li r6, 0 /* checksum */
mr r0, r3
b 1f
0: /* top, read another word for the indirection page */
lwzu r0, 4(r3)
1:
/* is it a destination page? (r8) */
rlwinm. r7, r0, 0, 31, 31 /* IND_DESTINATION (1<<0) */
beq 2f
rlwinm r8, r0, 0, 0, 19 /* clear kexec flags, page align */
b 0b
2: /* is it an indirection page? (r3) */
rlwinm. r7, r0, 0, 30, 30 /* IND_INDIRECTION (1<<1) */
beq 2f
rlwinm r3, r0, 0, 0, 19 /* clear kexec flags, page align */
subi r3, r3, 4
b 0b
2: /* are we done? */
rlwinm. r7, r0, 0, 29, 29 /* IND_DONE (1<<2) */
beq 2f
b 3f
2: /* is it a source page? (r9) */
rlwinm. r7, r0, 0, 28, 28 /* IND_SOURCE (1<<3) */
beq 0b
rlwinm r9, r0, 0, 0, 19 /* clear kexec flags, page align */
li r7, PAGE_SIZE / 4
mtctr r7
subi r9, r9, 4
subi r8, r8, 4
9:
lwzu r0, 4(r9) /* do the copy */
xor r6, r6, r0
stwu r0, 4(r8)
dcbst 0, r8
sync
icbi 0, r8
bdnz 9b
addi r9, r9, 4
addi r8, r8, 4
b 0b
3:
/* To be certain of avoiding problems with self-modifying code
* execute a serializing instruction here.
*/
isync
sync
powerpc/kexec: Adds correct calling convention for kexec purgatory Call kexec purgatory code correctly. We were getting lucky before. If you examine the powerpc 32bit kexec "purgatory" code you will see it expects the following: >From kexec-tools: purgatory/arch/ppc/v2wrap_32.S -> calling convention: -> r3 = physical number of this cpu (all cpus) -> r4 = address of this chunk (master only) As such, we need to set r3 to the current core, r4 happens to be unused by purgatory at the moment but we go ahead and set it here as well Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-27 11:58:21 +00:00
mfspr r3, SPRN_PIR /* current core we are running on */
mr r4, r5 /* load physical address of chunk called */
[PATCH] powerpc: Merge kexec This patch merges, to some extent, the PPC32 and PPC64 kexec implementations. We adopt the PPC32 approach of having ppc_md callbacks for the kexec functions. The current PPC64 implementation becomes the "default" implementation for PPC64 which platforms can select if they need no special treatment. I've added these default callbacks to pseries/maple/cell/powermac, this means iSeries no longer supports kexec - but it never worked anyway. I've renamed PPC32's machine_kexec_simple to default_machine_kexec, inline with PPC64. Judging by the comments it might be better named machine_kexec_non_of, or something, but at the moment it's the only implementation for PPC32 so it's the "default". Kexec requires machine_shutdown(), which is in machine_kexec.c on PPC32, but we already have in setup-common.c on powerpc. All this does is call ppc_md.nvram_sync, which only powermac implements, so instead make machine_shutdown a ppc_md member and have it call core99_nvram_sync directly on powermac. I've also stuck relocate_kernel.S into misc_32.S for powerpc. Built for ARCH=ppc, and 32 & 64 bit ARCH=powerpc, with KEXEC=y/n. Booted on P5 LPAR and successfully kexec'ed. Should apply on top of 493f25ef4087395891c99fcfe2c72e62e293e89f. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14 23:35:00 +11:00
/* jump to the entry point, usually the setup routine */
mtlr r5
blrl
1: b 1b
relocate_new_kernel_end:
.globl relocate_new_kernel_size
relocate_new_kernel_size:
.long relocate_new_kernel_end - relocate_new_kernel
#endif
Reference in a new issue Copy permalink