| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | /*
 | 
					
						
							|  |  |  |  *  Kernel Probes (KProbes) | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * Copyright (C) 2005-2006 Atmel Corporation | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * Based on arch/ppc64/kernel/kprobes.c | 
					
						
							|  |  |  |  *  Copyright (C) IBM Corporation, 2002, 2004 | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * This program is free software; you can redistribute it and/or modify | 
					
						
							|  |  |  |  * it under the terms of the GNU General Public License version 2 as | 
					
						
							|  |  |  |  * published by the Free Software Foundation. | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #include <linux/kprobes.h>
 | 
					
						
							|  |  |  | #include <linux/ptrace.h>
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #include <asm/cacheflush.h>
 | 
					
						
							| 
									
										
										
										
											2007-05-08 00:27:03 -07:00
										 |  |  | #include <linux/kdebug.h>
 | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | #include <asm/ocd.h>
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | DEFINE_PER_CPU(struct kprobe *, current_kprobe); | 
					
						
							|  |  |  | static unsigned long kprobe_status; | 
					
						
							|  |  |  | static struct pt_regs jprobe_saved_regs; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2007-10-16 01:27:49 -07:00
										 |  |  | struct kretprobe_blackpoint kretprobe_blacklist[] = {{NULL, NULL}}; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | int __kprobes arch_prepare_kprobe(struct kprobe *p) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	int ret = 0; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if ((unsigned long)p->addr & 0x01) { | 
					
						
							|  |  |  | 		printk("Attempt to register kprobe at an unaligned address\n"); | 
					
						
							|  |  |  | 		ret = -EINVAL; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	/* XXX: Might be a good idea to check if p->addr is a valid
 | 
					
						
							|  |  |  | 	 * kernel address as well... */ | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (!ret) { | 
					
						
							|  |  |  | 		pr_debug("copy kprobe at %p\n", p->addr); | 
					
						
							|  |  |  | 		memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); | 
					
						
							|  |  |  | 		p->opcode = *p->addr; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return ret; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | void __kprobes arch_arm_kprobe(struct kprobe *p) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	pr_debug("arming kprobe at %p\n", p->addr); | 
					
						
							| 
									
										
										
										
											2007-11-27 13:50:45 +01:00
										 |  |  | 	ocd_enable(NULL); | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 	*p->addr = BREAKPOINT_INSTRUCTION; | 
					
						
							|  |  |  | 	flush_icache_range((unsigned long)p->addr, | 
					
						
							|  |  |  | 			   (unsigned long)p->addr + sizeof(kprobe_opcode_t)); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | void __kprobes arch_disarm_kprobe(struct kprobe *p) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	pr_debug("disarming kprobe at %p\n", p->addr); | 
					
						
							| 
									
										
										
										
											2007-11-27 13:50:45 +01:00
										 |  |  | 	ocd_disable(NULL); | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 	*p->addr = p->opcode; | 
					
						
							|  |  |  | 	flush_icache_range((unsigned long)p->addr, | 
					
						
							|  |  |  | 			   (unsigned long)p->addr + sizeof(kprobe_opcode_t)); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	unsigned long dc; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	pr_debug("preparing to singlestep over %p (PC=%08lx)\n", | 
					
						
							|  |  |  | 		 p->addr, regs->pc); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	BUG_ON(!(sysreg_read(SR) & SYSREG_BIT(SR_D))); | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2007-11-27 13:31:20 +01:00
										 |  |  | 	dc = ocd_read(DC); | 
					
						
							|  |  |  | 	dc |= 1 << OCD_DC_SS_BIT; | 
					
						
							|  |  |  | 	ocd_write(DC, dc); | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 
 | 
					
						
							|  |  |  | 	/*
 | 
					
						
							|  |  |  | 	 * We must run the instruction from its original location | 
					
						
							|  |  |  | 	 * since it may actually reference PC. | 
					
						
							|  |  |  | 	 * | 
					
						
							|  |  |  | 	 * TODO: Do the instruction replacement directly in icache. | 
					
						
							|  |  |  | 	 */ | 
					
						
							|  |  |  | 	*p->addr = p->opcode; | 
					
						
							|  |  |  | 	flush_icache_range((unsigned long)p->addr, | 
					
						
							|  |  |  | 			   (unsigned long)p->addr + sizeof(kprobe_opcode_t)); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	unsigned long dc; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	pr_debug("resuming execution at PC=%08lx\n", regs->pc); | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2007-11-27 13:31:20 +01:00
										 |  |  | 	dc = ocd_read(DC); | 
					
						
							|  |  |  | 	dc &= ~(1 << OCD_DC_SS_BIT); | 
					
						
							|  |  |  | 	ocd_write(DC, dc); | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 
 | 
					
						
							|  |  |  | 	*p->addr = BREAKPOINT_INSTRUCTION; | 
					
						
							|  |  |  | 	flush_icache_range((unsigned long)p->addr, | 
					
						
							|  |  |  | 			   (unsigned long)p->addr + sizeof(kprobe_opcode_t)); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static void __kprobes set_current_kprobe(struct kprobe *p) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	__get_cpu_var(current_kprobe) = p; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static int __kprobes kprobe_handler(struct pt_regs *regs) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct kprobe *p; | 
					
						
							|  |  |  | 	void *addr = (void *)regs->pc; | 
					
						
							|  |  |  | 	int ret = 0; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2006-10-24 10:12:40 +02:00
										 |  |  | 	pr_debug("kprobe_handler: kprobe_running=%p\n", | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 		 kprobe_running()); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	/*
 | 
					
						
							|  |  |  | 	 * We don't want to be preempted for the entire | 
					
						
							|  |  |  | 	 * duration of kprobe processing | 
					
						
							|  |  |  | 	 */ | 
					
						
							|  |  |  | 	preempt_disable(); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	/* Check that we're not recursing */ | 
					
						
							|  |  |  | 	if (kprobe_running()) { | 
					
						
							|  |  |  | 		p = get_kprobe(addr); | 
					
						
							|  |  |  | 		if (p) { | 
					
						
							|  |  |  | 			if (kprobe_status == KPROBE_HIT_SS) { | 
					
						
							|  |  |  | 				printk("FIXME: kprobe hit while single-stepping!\n"); | 
					
						
							|  |  |  | 				goto no_kprobe; | 
					
						
							|  |  |  | 			} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 			printk("FIXME: kprobe hit while handling another kprobe\n"); | 
					
						
							|  |  |  | 			goto no_kprobe; | 
					
						
							|  |  |  | 		} else { | 
					
						
							|  |  |  | 			p = kprobe_running(); | 
					
						
							|  |  |  | 			if (p->break_handler && p->break_handler(p, regs)) | 
					
						
							|  |  |  | 				goto ss_probe; | 
					
						
							|  |  |  | 		} | 
					
						
							|  |  |  | 		/* If it's not ours, can't be delete race, (we hold lock). */ | 
					
						
							|  |  |  | 		goto no_kprobe; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	p = get_kprobe(addr); | 
					
						
							|  |  |  | 	if (!p) | 
					
						
							|  |  |  | 		goto no_kprobe; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	kprobe_status = KPROBE_HIT_ACTIVE; | 
					
						
							|  |  |  | 	set_current_kprobe(p); | 
					
						
							|  |  |  | 	if (p->pre_handler && p->pre_handler(p, regs)) | 
					
						
							|  |  |  | 		/* handler has already set things up, so skip ss setup */ | 
					
						
							|  |  |  | 		return 1; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | ss_probe: | 
					
						
							|  |  |  | 	prepare_singlestep(p, regs); | 
					
						
							|  |  |  | 	kprobe_status = KPROBE_HIT_SS; | 
					
						
							|  |  |  | 	return 1; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | no_kprobe: | 
					
						
							| 
									
										
										
										
											2006-12-06 20:33:54 -08:00
										 |  |  | 	preempt_enable_no_resched(); | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 	return ret; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static int __kprobes post_kprobe_handler(struct pt_regs *regs) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct kprobe *cur = kprobe_running(); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	pr_debug("post_kprobe_handler, cur=%p\n", cur); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (!cur) | 
					
						
							|  |  |  | 		return 0; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (cur->post_handler) { | 
					
						
							|  |  |  | 		kprobe_status = KPROBE_HIT_SSDONE; | 
					
						
							|  |  |  | 		cur->post_handler(cur, regs, 0); | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	resume_execution(cur, regs); | 
					
						
							|  |  |  | 	reset_current_kprobe(); | 
					
						
							|  |  |  | 	preempt_enable_no_resched(); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return 1; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2007-05-12 17:56:11 +02:00
										 |  |  | int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | { | 
					
						
							|  |  |  | 	struct kprobe *cur = kprobe_running(); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	pr_debug("kprobe_fault_handler: trapnr=%d\n", trapnr); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) | 
					
						
							|  |  |  | 		return 1; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (kprobe_status & KPROBE_HIT_SS) { | 
					
						
							|  |  |  | 		resume_execution(cur, regs); | 
					
						
							|  |  |  | 		preempt_enable_no_resched(); | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 	return 0; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /*
 | 
					
						
							|  |  |  |  * Wrapper routine to for handling exceptions. | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | int __kprobes kprobe_exceptions_notify(struct notifier_block *self, | 
					
						
							|  |  |  | 				       unsigned long val, void *data) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct die_args *args = (struct die_args *)data; | 
					
						
							|  |  |  | 	int ret = NOTIFY_DONE; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	pr_debug("kprobe_exceptions_notify: val=%lu, data=%p\n", | 
					
						
							|  |  |  | 		 val, data); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	switch (val) { | 
					
						
							|  |  |  | 	case DIE_BREAKPOINT: | 
					
						
							|  |  |  | 		if (kprobe_handler(args->regs)) | 
					
						
							|  |  |  | 			ret = NOTIFY_STOP; | 
					
						
							|  |  |  | 		break; | 
					
						
							|  |  |  | 	case DIE_SSTEP: | 
					
						
							|  |  |  | 		if (post_kprobe_handler(args->regs)) | 
					
						
							|  |  |  | 			ret = NOTIFY_STOP; | 
					
						
							|  |  |  | 		break; | 
					
						
							|  |  |  | 	default: | 
					
						
							|  |  |  | 		break; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return ret; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct jprobe *jp = container_of(p, struct jprobe, kp); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	memcpy(&jprobe_saved_regs, regs, sizeof(struct pt_regs)); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	/*
 | 
					
						
							|  |  |  | 	 * TODO: We should probably save some of the stack here as | 
					
						
							|  |  |  | 	 * well, since gcc may pass arguments on the stack for certain | 
					
						
							|  |  |  | 	 * functions (lots of arguments, large aggregates, varargs) | 
					
						
							|  |  |  | 	 */ | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	/* setup return addr to the jprobe handler routine */ | 
					
						
							|  |  |  | 	regs->pc = (unsigned long)jp->entry; | 
					
						
							|  |  |  | 	return 1; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | void __kprobes jprobe_return(void) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	asm volatile("breakpoint" ::: "memory"); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	/*
 | 
					
						
							|  |  |  | 	 * FIXME - we should ideally be validating that we got here 'cos | 
					
						
							|  |  |  | 	 * of the "trap" in jprobe_return() above, before restoring the | 
					
						
							|  |  |  | 	 * saved regs... | 
					
						
							|  |  |  | 	 */ | 
					
						
							|  |  |  | 	memcpy(regs, &jprobe_saved_regs, sizeof(struct pt_regs)); | 
					
						
							|  |  |  | 	return 1; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | int __init arch_init_kprobes(void) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	/* TODO: Register kretprobe trampoline */ | 
					
						
							|  |  |  | 	return 0; | 
					
						
							|  |  |  | } |