| 
									
										
											  
											
												OMAP3/4 clock: split into per-chip family files
clock34xx_data.c now contains data for the OMAP34xx family, the
OMAP36xx family, and the OMAP3517 family, so rename it to
clock3xxx_data.c.  Rename clock34xx.c to clock3xxx.c, and move the
chip family-specific clock functions to clock34xx.c, clock36xx.c, or
clock3517.c, as appropriate.  So now "clock3xxx.*" refers to the OMAP3
superset.
The main goal here is to prepare to compile chip family-specific clock
functions only for kernel builds that target that chip family.  To get to
that point, we also need to add CONFIG_SOC_* options for those other
chip families; that will be done in future patches, planned for 2.6.35.
OMAP4 is also affected by this.  It duplicated the OMAP3 non-CORE DPLL
clkops structure.  The OMAP4 variant of this clkops structure has been
removed, and since there was nothing else currently in clock44xx.c, it
too has been removed -- it can always be added back later when there
is some content for it.  (The OMAP4 clock autogeneration scripts have been
updated accordingly.)
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Ranjith Lohithakshan <ranjithl@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
											
										 
											2010-02-22 22:09:20 -07:00
										 |  |  | /*
 | 
					
						
							|  |  |  |  * OMAP3517/3505-specific clock framework functions | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * Copyright (C) 2010 Texas Instruments, Inc. | 
					
						
							| 
									
										
										
										
											2011-02-25 15:39:30 -07:00
										 |  |  |  * Copyright (C) 2011 Nokia Corporation | 
					
						
							| 
									
										
											  
											
												OMAP3/4 clock: split into per-chip family files
clock34xx_data.c now contains data for the OMAP34xx family, the
OMAP36xx family, and the OMAP3517 family, so rename it to
clock3xxx_data.c.  Rename clock34xx.c to clock3xxx.c, and move the
chip family-specific clock functions to clock34xx.c, clock36xx.c, or
clock3517.c, as appropriate.  So now "clock3xxx.*" refers to the OMAP3
superset.
The main goal here is to prepare to compile chip family-specific clock
functions only for kernel builds that target that chip family.  To get to
that point, we also need to add CONFIG_SOC_* options for those other
chip families; that will be done in future patches, planned for 2.6.35.
OMAP4 is also affected by this.  It duplicated the OMAP3 non-CORE DPLL
clkops structure.  The OMAP4 variant of this clkops structure has been
removed, and since there was nothing else currently in clock44xx.c, it
too has been removed -- it can always be added back later when there
is some content for it.  (The OMAP4 clock autogeneration scripts have been
updated accordingly.)
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Ranjith Lohithakshan <ranjithl@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
											
										 
											2010-02-22 22:09:20 -07:00
										 |  |  |  * | 
					
						
							|  |  |  |  * Ranjith Lohithakshan | 
					
						
							|  |  |  |  * Paul Walmsley | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * Parts of this code are based on code written by | 
					
						
							|  |  |  |  * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu, | 
					
						
							|  |  |  |  * Russell King | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * This program is free software; you can redistribute it and/or modify | 
					
						
							|  |  |  |  * it under the terms of the GNU General Public License version 2 as | 
					
						
							|  |  |  |  * published by the Free Software Foundation. | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | #undef DEBUG
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #include <linux/kernel.h>
 | 
					
						
							|  |  |  | #include <linux/clk.h>
 | 
					
						
							|  |  |  | #include <linux/io.h>
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #include "clock.h"
 | 
					
						
							|  |  |  | #include "clock3517.h"
 | 
					
						
							| 
									
										
										
										
											2012-10-21 01:01:11 -06:00
										 |  |  | #include "cm3xxx.h"
 | 
					
						
							| 
									
										
											  
											
												OMAP3/4 clock: split into per-chip family files
clock34xx_data.c now contains data for the OMAP34xx family, the
OMAP36xx family, and the OMAP3517 family, so rename it to
clock3xxx_data.c.  Rename clock34xx.c to clock3xxx.c, and move the
chip family-specific clock functions to clock34xx.c, clock36xx.c, or
clock3517.c, as appropriate.  So now "clock3xxx.*" refers to the OMAP3
superset.
The main goal here is to prepare to compile chip family-specific clock
functions only for kernel builds that target that chip family.  To get to
that point, we also need to add CONFIG_SOC_* options for those other
chip families; that will be done in future patches, planned for 2.6.35.
OMAP4 is also affected by this.  It duplicated the OMAP3 non-CORE DPLL
clkops structure.  The OMAP4 variant of this clkops structure has been
removed, and since there was nothing else currently in clock44xx.c, it
too has been removed -- it can always be added back later when there
is some content for it.  (The OMAP4 clock autogeneration scripts have been
updated accordingly.)
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Ranjith Lohithakshan <ranjithl@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
											
										 
											2010-02-22 22:09:20 -07:00
										 |  |  | #include "cm-regbits-34xx.h"
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /*
 | 
					
						
							|  |  |  |  * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported | 
					
						
							|  |  |  |  * in the same register at a bit offset of 0x8. The EN_ACK for ICK is | 
					
						
							|  |  |  |  * at an offset of 4 from ICK enable bit. | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | #define AM35XX_IPSS_ICK_MASK			0xF
 | 
					
						
							|  |  |  | #define AM35XX_IPSS_ICK_EN_ACK_OFFSET 		0x4
 | 
					
						
							|  |  |  | #define AM35XX_IPSS_ICK_FCK_OFFSET		0x8
 | 
					
						
							|  |  |  | #define AM35XX_IPSS_CLK_IDLEST_VAL		0
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /**
 | 
					
						
							|  |  |  |  * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS | 
					
						
							|  |  |  |  * @clk: struct clk * being enabled | 
					
						
							|  |  |  |  * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into | 
					
						
							|  |  |  |  * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into | 
					
						
							|  |  |  |  * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * The interface clocks on AM35xx IPSS reflects the clock idle status | 
					
						
							|  |  |  |  * in the enable register itsel at a bit offset of 4 from the enable | 
					
						
							|  |  |  |  * bit. A value of 1 indicates that clock is enabled. | 
					
						
							|  |  |  |  */ | 
					
						
							| 
									
										
										
										
											2012-04-27 15:53:48 +05:30
										 |  |  | static void am35xx_clk_find_idlest(struct clk_hw_omap *clk, | 
					
						
							| 
									
										
											  
											
												OMAP3/4 clock: split into per-chip family files
clock34xx_data.c now contains data for the OMAP34xx family, the
OMAP36xx family, and the OMAP3517 family, so rename it to
clock3xxx_data.c.  Rename clock34xx.c to clock3xxx.c, and move the
chip family-specific clock functions to clock34xx.c, clock36xx.c, or
clock3517.c, as appropriate.  So now "clock3xxx.*" refers to the OMAP3
superset.
The main goal here is to prepare to compile chip family-specific clock
functions only for kernel builds that target that chip family.  To get to
that point, we also need to add CONFIG_SOC_* options for those other
chip families; that will be done in future patches, planned for 2.6.35.
OMAP4 is also affected by this.  It duplicated the OMAP3 non-CORE DPLL
clkops structure.  The OMAP4 variant of this clkops structure has been
removed, and since there was nothing else currently in clock44xx.c, it
too has been removed -- it can always be added back later when there
is some content for it.  (The OMAP4 clock autogeneration scripts have been
updated accordingly.)
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Ranjith Lohithakshan <ranjithl@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
											
										 
											2010-02-22 22:09:20 -07:00
										 |  |  | 					    void __iomem **idlest_reg, | 
					
						
							|  |  |  | 					    u8 *idlest_bit, | 
					
						
							|  |  |  | 					    u8 *idlest_val) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	*idlest_reg = (__force void __iomem *)(clk->enable_reg); | 
					
						
							|  |  |  | 	*idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET; | 
					
						
							|  |  |  | 	*idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /**
 | 
					
						
							|  |  |  |  * am35xx_clk_find_companion - find companion clock to @clk | 
					
						
							|  |  |  |  * @clk: struct clk * to find the companion clock of | 
					
						
							|  |  |  |  * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in | 
					
						
							|  |  |  |  * @other_bit: u8 ** to return the companion clock bit shift in | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * Some clocks don't have companion clocks.  For example, modules with | 
					
						
							|  |  |  |  * only an interface clock (such as HECC) don't have a companion | 
					
						
							|  |  |  |  * clock.  Right now, this code relies on the hardware exporting a bit | 
					
						
							|  |  |  |  * in the correct companion register that indicates that the | 
					
						
							|  |  |  |  * nonexistent 'companion clock' is active.  Future patches will | 
					
						
							|  |  |  |  * associate this type of code with per-module data structures to | 
					
						
							|  |  |  |  * avoid this issue, and remove the casts.  No return value. | 
					
						
							|  |  |  |  */ | 
					
						
							| 
									
										
										
										
											2012-04-27 15:53:48 +05:30
										 |  |  | static void am35xx_clk_find_companion(struct clk_hw_omap *clk, | 
					
						
							|  |  |  | 				      void __iomem **other_reg, | 
					
						
							|  |  |  | 				      u8 *other_bit) | 
					
						
							| 
									
										
											  
											
												OMAP3/4 clock: split into per-chip family files
clock34xx_data.c now contains data for the OMAP34xx family, the
OMAP36xx family, and the OMAP3517 family, so rename it to
clock3xxx_data.c.  Rename clock34xx.c to clock3xxx.c, and move the
chip family-specific clock functions to clock34xx.c, clock36xx.c, or
clock3517.c, as appropriate.  So now "clock3xxx.*" refers to the OMAP3
superset.
The main goal here is to prepare to compile chip family-specific clock
functions only for kernel builds that target that chip family.  To get to
that point, we also need to add CONFIG_SOC_* options for those other
chip families; that will be done in future patches, planned for 2.6.35.
OMAP4 is also affected by this.  It duplicated the OMAP3 non-CORE DPLL
clkops structure.  The OMAP4 variant of this clkops structure has been
removed, and since there was nothing else currently in clock44xx.c, it
too has been removed -- it can always be added back later when there
is some content for it.  (The OMAP4 clock autogeneration scripts have been
updated accordingly.)
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Ranjith Lohithakshan <ranjithl@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
											
										 
											2010-02-22 22:09:20 -07:00
										 |  |  | { | 
					
						
							|  |  |  | 	*other_reg = (__force void __iomem *)(clk->enable_reg); | 
					
						
							|  |  |  | 	if (clk->enable_bit & AM35XX_IPSS_ICK_MASK) | 
					
						
							|  |  |  | 		*other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET; | 
					
						
							|  |  |  | 	else | 
					
						
							|  |  |  | 		*other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET; | 
					
						
							|  |  |  | } | 
					
						
							| 
									
										
										
										
											2012-04-27 15:53:48 +05:30
										 |  |  | const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait = { | 
					
						
							|  |  |  | 	.find_idlest	= am35xx_clk_find_idlest, | 
					
						
							|  |  |  | 	.find_companion	= am35xx_clk_find_companion, | 
					
						
							|  |  |  | }; | 
					
						
							| 
									
										
											  
											
												OMAP3/4 clock: split into per-chip family files
clock34xx_data.c now contains data for the OMAP34xx family, the
OMAP36xx family, and the OMAP3517 family, so rename it to
clock3xxx_data.c.  Rename clock34xx.c to clock3xxx.c, and move the
chip family-specific clock functions to clock34xx.c, clock36xx.c, or
clock3517.c, as appropriate.  So now "clock3xxx.*" refers to the OMAP3
superset.
The main goal here is to prepare to compile chip family-specific clock
functions only for kernel builds that target that chip family.  To get to
that point, we also need to add CONFIG_SOC_* options for those other
chip families; that will be done in future patches, planned for 2.6.35.
OMAP4 is also affected by this.  It duplicated the OMAP3 non-CORE DPLL
clkops structure.  The OMAP4 variant of this clkops structure has been
removed, and since there was nothing else currently in clock44xx.c, it
too has been removed -- it can always be added back later when there
is some content for it.  (The OMAP4 clock autogeneration scripts have been
updated accordingly.)
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Ranjith Lohithakshan <ranjithl@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
											
										 
											2010-02-22 22:09:20 -07:00
										 |  |  | 
 | 
					
						
							|  |  |  | /**
 | 
					
						
							|  |  |  |  * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS | 
					
						
							|  |  |  |  * @clk: struct clk * being enabled | 
					
						
							|  |  |  |  * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into | 
					
						
							|  |  |  |  * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into | 
					
						
							|  |  |  |  * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * The IPSS target CM_IDLEST bit is at a different shift from the | 
					
						
							|  |  |  |  * CM_{I,F}CLKEN bit.  Pass back the correct info via @idlest_reg | 
					
						
							|  |  |  |  * and @idlest_bit.  No return value. | 
					
						
							|  |  |  |  */ | 
					
						
							| 
									
										
										
										
											2012-04-27 15:53:48 +05:30
										 |  |  | static void am35xx_clk_ipss_find_idlest(struct clk_hw_omap *clk, | 
					
						
							| 
									
										
											  
											
												OMAP3/4 clock: split into per-chip family files
clock34xx_data.c now contains data for the OMAP34xx family, the
OMAP36xx family, and the OMAP3517 family, so rename it to
clock3xxx_data.c.  Rename clock34xx.c to clock3xxx.c, and move the
chip family-specific clock functions to clock34xx.c, clock36xx.c, or
clock3517.c, as appropriate.  So now "clock3xxx.*" refers to the OMAP3
superset.
The main goal here is to prepare to compile chip family-specific clock
functions only for kernel builds that target that chip family.  To get to
that point, we also need to add CONFIG_SOC_* options for those other
chip families; that will be done in future patches, planned for 2.6.35.
OMAP4 is also affected by this.  It duplicated the OMAP3 non-CORE DPLL
clkops structure.  The OMAP4 variant of this clkops structure has been
removed, and since there was nothing else currently in clock44xx.c, it
too has been removed -- it can always be added back later when there
is some content for it.  (The OMAP4 clock autogeneration scripts have been
updated accordingly.)
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Ranjith Lohithakshan <ranjithl@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
											
										 
											2010-02-22 22:09:20 -07:00
										 |  |  | 					    void __iomem **idlest_reg, | 
					
						
							|  |  |  | 					    u8 *idlest_bit, | 
					
						
							|  |  |  | 					    u8 *idlest_val) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	u32 r; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); | 
					
						
							|  |  |  | 	*idlest_reg = (__force void __iomem *)r; | 
					
						
							|  |  |  | 	*idlest_bit = AM35XX_ST_IPSS_SHIFT; | 
					
						
							|  |  |  | 	*idlest_val = OMAP34XX_CM_IDLEST_VAL; | 
					
						
							|  |  |  | } | 
					
						
							| 
									
										
										
										
											2012-04-27 16:35:52 +05:30
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-04-27 15:53:48 +05:30
										 |  |  | const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait = { | 
					
						
							|  |  |  | 	.allow_idle	= omap2_clkt_iclk_allow_idle, | 
					
						
							|  |  |  | 	.deny_idle	= omap2_clkt_iclk_deny_idle, | 
					
						
							|  |  |  | 	.find_idlest	= am35xx_clk_ipss_find_idlest, | 
					
						
							|  |  |  | 	.find_companion	= omap2_clk_dflt_find_companion, | 
					
						
							|  |  |  | }; |